path: root/lib/rbot/registry/tc.rb

#-- vim:sw=2:et
#++
#
# :title: DB interface

begin
  require 'bdb'
  if BDB::VERSION_MAJOR < 4
    fatal "Your bdb (Berkeley DB) version #{BDB::VERSION} is too old!"
    fatal "rbot will only run with bdb version 4 or higher, please upgrade."
    fatal "For maximum reliability, upgrade to version 4.2 or higher."
    raise BDB::Fatal, BDB::VERSION + " is too old"
  end

  if BDB::VERSION_MAJOR == 4 and BDB::VERSION_MINOR < 2
    warning "Your bdb (Berkeley DB) version #{BDB::VERSION} may not be reliable."
    warning "If possible, try upgrade version 4.2 or later."
  end
rescue LoadError
  warning "rbot couldn't load the bdb module. Old registries won't be upgraded"
rescue Exception => e
  warning "rbot couldn't load the bdb module: #{e.pretty_inspect}"
end




require 'tokyocabinet'

module Irc

  class DBFatal < Exception ; end

  if defined? BDB
  # DBHash is for tying a hash to disk (using bdb).
  # Call it with an identifier, for example "mydata". It'll look for
  # mydata.db, if it exists, it will load and reference that db.
  # Otherwise it'll create and empty db called mydata.db
  class DBHash

    # absfilename:: use +key+ as an actual filename, don't prepend the bot's
    #               config path and don't append ".db"
    def initialize(bot, key, absfilename=false)
      @bot = bot
      @key = key
      relfilename = @bot.path key
      relfilename << '.db'
      if absfilename && File.exist?(key)
        # db already exists, use it
        @db = DBHash.open_db(key)
      elsif absfilename
        # create empty db
        @db = DBHash.create_db(key)
      elsif File.exist? relfilename
        # db already exists, use it
        @db = DBHash.open_db relfilename
      else
        # create empty db
        @db = DBHash.create_db relfilename
      end
    end

    def method_missing(method, *args, &block)
      return @db.send(method, *args, &block)
    end

    def DBHash.create_db(name)
      debug "DBHash: creating empty db #{name}"
      return BDB::Hash.open(name, nil,
      BDB::CREATE | BDB::EXCL, 0600)
    end

    def DBHash.open_db(name)
      debug "DBHash: opening existing db #{name}"
      return BDB::Hash.open(name, nil, "r+", 0600)
    end

  end
  # make BTree lookups case insensitive
  module ::BDB
    class CIBtree < Btree
      def bdb_bt_compare(a, b)
        if a == nil || b == nil
          warning "CIBTree: comparing #{a.inspect} (#{self[a].inspect}) with #{b.inspect} (#{self[b].inspect})"
        end
        (a||'').downcase <=> (b||'').downcase
      end
    end
  end
  end

  module ::TokyoCabinet
    class CIBDB < TokyoCabinet::BDB
      def open(path, omode)
        res = super
        if res
          self.setcmpfunc(Proc.new do |a, b|
            a.downcase <=> b.downcase
          end)
        end
        res
      end
    end
  end

  # DBTree is a BTree equivalent of DBHash, with case insensitive lookups.
  class DBTree
    # absfilename:: use +key+ as an actual filename, don't prepend the bot's
    #               config path and don't append ".db"
    def initialize(bot, key, absfilename=false)
      @bot = bot
      @key = key

      relfilename = @bot.path key
      relfilename << '.tdb'

      if absfilename && File.exist?(key)
        # db already exists, use it
        @db = DBTree.open_db(key)
        @fname = key.dup
      elsif absfilename
        # create empty db
        @db = DBTree.create_db(key)
        @fname = key.dup
      elsif File.exist? relfilename
        # db already exists, use it
        @db = DBTree.open_db relfilename
        @fname = relfilename.dup
      else
        # create empty db
        @db = DBTree.create_db relfilename
        @fname = relfilename.dup
      end
      oldbasename = (absfilename ? key : relfilename).gsub(/\.tdb$/, ".db")
      if File.exists? oldbasename and defined? BDB
        # upgrading
        warning "Upgrading old database #{oldbasename}..."
        oldb = ::BDB::CIBtree.open(oldbasename, nil, "r", 0600)
        oldb.each_key do |k|
          @db.outlist k
          @db.putlist k, (oldb.duplicates(k, false))
        end
        oldb.close
        File.rename oldbasename, oldbasename+".bak"
      end
      @db
    end

    def method_missing(method, *args, &block)
      return @db.send(method, *args, &block)
    end

    # Since TokyoCabinet does not have the concept of an environment, we have to do the
    # database management ourselves. In particular, we have to keep a list of open
    # registries to be sure we to close all of them on exit
    @@bot_registries={ }
    def self.close_bot_registries
      @@bot_registries.each { |name, reg| reg.close }
      @@bot_registries.clear
    end

    def close
      db = @@bot_registries.delete(@fname)
      if db != @db
        error "We think we have #{@db} from #{@fname}, TC pseudo-env gives us #{db}"
      end
      @db.close
    end

    def DBTree.create_db(name)
      debug "DBTree: creating empty db #{name}"
      if @@bot_registries.key? name
        error "DBTree: creating assumingly allocated db #{name}?!"
        return @@bot_registries[name]
      end
      db = TokyoCabinet::CIBDB.new
      res = db.open(name, TokyoCabinet::CIBDB::OREADER | TokyoCabinet::CIBDB::OCREAT | TokyoCabinet::CIBDB::OWRITER)
      if res
        @@bot_registries[name] = db
      else
        error "DBTree: creating empty db #{name}: #{db.errmsg(db.ecode)}"
      end
      return db
    end

    def DBTree.open_db(name)
      debug "DBTree: opening existing db #{name}"
      if @@bot_registries.key? name
        return @@bot_registries[name]
      end
      db = TokyoCabinet::CIBDB.new
      res = db.open(name, TokyoCabinet::CIBDB::OREADER | TokyoCabinet::CIBDB::OWRITER)
      if res
        @@bot_registries[name] = db
      else
        error "DBTree: opening db #{name}: #{db.errmsg(db.ecode)}"
      end
      return db
    end

    def DBTree.cleanup_logs()
      # no-op
    end

    def DBTree.stats()
      # no-op
    end

    def DBTree.cleanup_env()
      DBTree.close_bot_registries
    end

  end

end

module Irc
class Bot

  # This class is now used purely for upgrading from prior versions of rbot
  # the new registry is split into multiple DBHash objects, one per plugin
  class Registry
    def initialize(bot)
      @bot = bot
      upgrade_data
      upgrade_data2
    end

    # check for older versions of rbot with data formats that require updating
    # NB this function is called _early_ in init(), pretty much all you have to
    # work with is @bot.botclass.
    def upgrade_data
      oldreg = @bot.path 'registry.db'
      if defined? DBHash
        newreg = @bot.path 'plugin_registry.db'
        if File.exist?(oldreg)
          log _("upgrading old-style (rbot 0.9.5 or earlier) plugin registry to new format")
          old = ::BDB::Hash.open(oldreg, nil, "r+", 0600)
          new = ::BDB::CIBtree.open(newreg, nil, ::BDB::CREATE | ::BDB::EXCL, 0600)
          old.each {|k,v|
            new[k] = v
          }
          old.close
          new.close
          File.rename(oldreg, oldreg + ".old")
        end
      else
        warning "Won't upgrade data: BDB not installed" if File.exist? oldreg
      end
    end

    def upgrade_data2
      oldreg = @bot.path 'plugin_registry.db'
      if not defined? BDB
        warning "Won't upgrade data: BDB not installed" if File.exist? oldreg
        return
      end
      newdir = @bot.path 'registry'
      if File.exist?(oldreg)
        Dir.mkdir(newdir) unless File.exist?(newdir)
        env = BDB::Env.open(@bot.botclass, BDB::INIT_TRANSACTION | BDB::CREATE | BDB::RECOVER)# | BDB::TXN_NOSYNC)
        dbs = Hash.new
        log _("upgrading previous (rbot 0.9.9 or earlier) plugin registry to new split format")
        old = BDB::CIBtree.open(oldreg, nil, "r+", 0600, "env" => env)
        old.each {|k,v|
          prefix,key = k.split("/", 2)
          prefix.downcase!
          # subregistries were split with a +, now they are in separate folders
          if prefix.gsub!(/\+/, "/")
            # Ok, this code needs to be put in the db opening routines
            dirs = File.dirname("#{@bot.botclass}/registry/#{prefix}.db").split("/")
            dirs.length.times { |i|
              dir = dirs[0,i+1].join("/")+"/"
              unless File.exist?(dir)
                log _("creating subregistry directory #{dir}")
                Dir.mkdir(dir)
              end
            }
          end
          unless dbs.has_key?(prefix)
            log _("creating db #{@bot.botclass}/registry/#{prefix}.tdb")
            dbs[prefix] = TokyoCabinet::CIBDB.open("#{@bot.botclass}/registry/#{prefix}.tdb",
             TokyoCabinet::CIBDB::OREADER | TokyoCabinet::CIBDB::OCREAT | TokyoCabinet::CIBDB::OWRITER)
          end
          dbs[prefix][key] = v
        }
        old.close
        File.rename(oldreg, oldreg + ".old")
        dbs.each {|k,v|
          log _("closing db #{k}")
          v.close
        }
        env.close
      end
    end

  # This class provides persistent storage for plugins via a hash interface.
  # The default mode is an object store, so you can store ruby objects and
  # reference them with hash keys. This is because the default store/restore
  # methods of the plugins' RegistryAccessor are calls to Marshal.dump and
  # Marshal.restore,
  # for example:
  #   blah = Hash.new
  #   blah[:foo] = "fum"
  #   @registry[:blah] = blah
  # then, even after the bot is shut down and disconnected, on the next run you
  # can access the blah object as it was, with:
  #   blah = @registry[:blah]
  # The registry can of course be used to store simple strings, fixnums, etc as
  # well, and should be useful to store or cache plugin data or dynamic plugin
  # configuration.
  #
  # WARNING:
  # in object store mode, don't make the mistake of treating it like a live
  # object, e.g. (using the example above)
  #   @registry[:blah][:foo] = "flump"
  # will NOT modify the object in the registry - remember that Registry#[]
  # returns a Marshal.restore'd object, the object you just modified in place
  # will disappear. You would need to:
  #   blah = @registry[:blah]
  #   blah[:foo] = "flump"
  #   @registry[:blah] = blah
  #
  # If you don't need to store objects, and strictly want a persistant hash of
  # strings, you can override the store/restore methods to suit your needs, for
  # example (in your plugin):
  #   def initialize
  #     class << @registry
  #       def store(val)
  #         val
  #       end
  #       def restore(val)
  #         val
  #       end
  #     end
  #   end
  # Your plugins section of the registry is private, it has its own namespace
  # (derived from the plugin's class name, so change it and lose your data).
  # Calls to registry.each etc, will only iterate over your namespace.
  class Accessor

    attr_accessor :recovery

    # plugins don't call this - a Registry::Accessor is created for them and
    # is accessible via @registry.
    def initialize(bot, name)
      @bot = bot
      @name = name.downcase
      @filename = @bot.path 'registry', @name
      dirs = File.dirname(@filename).split("/")
      dirs.length.times { |i|
        dir = dirs[0,i+1].join("/")+"/"
        unless File.exist?(dir)
          debug "creating subregistry directory #{dir}"
          Dir.mkdir(dir)
        end
      }
      @filename << ".tdb"
      @registry = nil
      @default = nil
      @recovery = nil
      # debug "initializing registry accessor with name #{@name}"
    end

    def registry
        @registry ||= DBTree.new @bot, "registry/#{@name}"
    end

    def flush
      # debug "fushing registry #{registry}"
      return if !@registry
      registry.sync
    end

    def close
      # debug "closing registry #{registry}"
      return if !@registry
      registry.close
      @registry = nil
    end

    # convert value to string form for storing in the registry
    # defaults to Marshal.dump(val) but you can override this in your module's
    # registry object to use any method you like.
    # For example, if you always just handle strings use:
    #   def store(val)
    #     val
    #   end
    def store(val)
      Marshal.dump(val)
    end

    # restores object from string form, restore(store(val)) must return val.
    # If you override store, you should override restore to reverse the
    # action.
    # For example, if you always just handle strings use:
    #   def restore(val)
    #     val
    #   end
    def restore(val)
      begin
        Marshal.restore(val)
      rescue Exception => e
        error _("failed to restore marshal data for #{val.inspect}, attempting recovery or fallback to default")
        debug e
        if defined? @recovery and @recovery
          begin
            return @recovery.call(val)
          rescue Exception => ee
            error _("marshal recovery failed, trying default")
            debug ee
          end
        end
        return default
      end
    end

    # lookup a key in the registry
    def [](key)
      if File.exist?(@filename) and registry.has_key?(key.to_s)
        return restore(registry[key.to_s])
      else
        return default
      end
    end

    # set a key in the registry
    def []=(key,value)
      registry[key.to_s] = store(value)
    end

    # set the default value for registry lookups, if the key sought is not
    # found, the default will be returned. The default default (har) is nil.
    def set_default (default)
      @default = default
    end

    def default
      @default && (@default.dup rescue @default)
    end

    # just like Hash#each
    def each(set=nil, bulk=0, &block)
      return nil unless File.exist?(@filename)
      registry.fwmkeys(set.to_s).each {|key|
        block.call(key, restore(registry[key]))
      }
    end

    # just like Hash#each_key
    def each_key(set=nil, bulk=0, &block)
      return nil unless File.exist?(@filename)
      registry.fwmkeys(set.to_s).each do |key|
        block.call(key)
      end
    end

    # just like Hash#each_value
    def each_value(set=nil, bulk=0, &block)
      return nil unless File.exist?(@filename)
      registry.fwmkeys(set.to_s).each do |key|
        block.call(restore(registry[key]))
      end
    end

    # just like Hash#has_key?
    def has_key?(key)
      return false unless File.exist?(@filename)
      return registry.has_key?(key.to_s)
    end

    alias include? has_key?
    alias member? has_key?
    alias key? has_key?

    # just like Hash#has_both?
    def has_both?(key, value)
      return false unless File.exist?(@filename)
      registry.has_key?(key.to_s) and registry.has_value?(store(value))
    end

    # just like Hash#has_value?
    def has_value?(value)
      return false unless File.exist?(@filename)
      return registry.has_value?(store(value))
    end

    # just like Hash#index?
    def index(value)
      self.each do |k,v|
        return k if v == value
      end
      return nil
    end

    # delete a key from the registry
    def delete(key)
      return default unless File.exist?(@filename)
      return registry.delete(key.to_s)
    end

    # returns a list of your keys
    def keys
      return [] unless File.exist?(@filename)
      return registry.keys
    end

    # Return an array of all associations [key, value] in your namespace
    def to_a
      return [] unless File.exist?(@filename)
      ret = Array.new
      registry.each {|key, value|
        ret << [key, restore(value)]
      }
      return ret
    end

    # Return an hash of all associations {key => value} in your namespace
    def to_hash
      return {} unless File.exist?(@filename)
      ret = Hash.new
      registry.each {|key, value|
        ret[key] = restore(value)
      }
      return ret
    end

    # empties the registry (restricted to your namespace)
    def clear
      return true unless File.exist?(@filename)
      registry.vanish
    end
    alias truncate clear

    # returns an array of the values in your namespace of the registry
    def values
      return [] unless File.exist?(@filename)
      ret = Array.new
      self.each {|k,v|
        ret << restore(v)
      }
      return ret
    end

    def sub_registry(prefix)
      return Accessor.new(@bot, @name + "/" + prefix.to_s)
    end

    # returns the number of keys in your registry namespace
    def length
      return 0 unless File.exist?(@filename)
      registry.length
    end
    alias size length

    # That is btree!
    def putdup(key, value)
      registry.putdup(key.to_s, store(value))
    end

    def putlist(key, values)
      registry.putlist(key.to_s, value.map {|v| store(v)})
    end

    def getlist(key)
      return [] unless File.exist?(@filename)
      (registry.getlist(key.to_s) || []).map {|v| restore(v)}
    end
  end

  end
end
end