diff options
Diffstat (limited to 'conf/inspircd.conf.example')
| -rw-r--r-- | conf/inspircd.conf.example | 744 |
1 files changed, 0 insertions, 744 deletions
diff --git a/conf/inspircd.conf.example b/conf/inspircd.conf.example deleted file mode 100644 index 7da7a1596..000000000 --- a/conf/inspircd.conf.example +++ /dev/null @@ -1,744 +0,0 @@ -######################################################################## -# # -# --------------------------- # -# InspIRCd Configuration File # -# --------------------------- # -# # -##################################||#################################### - #||# -##################################||#################################### -# # -# This is an example of the config file for InspIRCd. # -# Change the options to suit your network # -# # -# Last updated on : 06/06/2005 # -# Written by : CC (cc@backchat.co.za) # -# Updated by : katsklaw (katsklaw@gmail.com) # -######################################################################## - - - -#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- -# # -# Here is where you enter the information about your server. # -# # -# Syntax is as follows: # -# <server name="server.name" # -# description="Server Description" # -# network="MyNetwork"> # -# # - -<server name="penguin.omega.org.za" - description="Waddle World" - network="Omega"> - - -#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Describes the Server Administrator's real name, nick # -# and email address. # -# # -# Syntax is as follows: # -# <admin name="real name" # -# nick="nick name" # -# email="email@address.com"> # -# # - -<admin name="Johnny English" - nick="MI5" - email="MI5@the.best.secret.agent"> - - -#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- -# # -# Enter the port and address bindings here. # -# # -# bind address - specifies which the address which ports bind # -# port - opens an unused port # -# type - can be 'clients' or 'servers'. The clients type is # -# a standard tcp based socket, the servers type is a # -# also a TCP based connection but of a different # -# format. # -# default - if the port type is 'servers' then this can be # -# specified. If set to 'yes', it indicates that this # -# port is the default route for all /connect commands.# -# if you do not bind your default route to an # -# external ip, or all ip's, you may have connection # -# problems. # -# # -# Leaving address empty binds to all available interfaces # -# # -# Syntax is as follows: # -# # -# <bind address="ip number" port="port" type="clients"> # -# <bind address="ip number" port="port" type="servers"> # -# <bind address="ip number" port="port" type="servers" default="yes"> # -# # - -<bind address="" port="6660" type="clients"> -<bind address="" port="7000" type="servers" default="yes"> -<bind address="" port="7001" type="servers"> - - -#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- -# # -# You can configure the passwords here which you wish to use for # -# the die and restart commands. Only trusted ircops who will # -# need this ability should know the die and restart password. # -# # -# Syntax is as follows: # -# <power diepass="die password" restartpass="restart password" # -# pause="secs before dying"> # -# # - -<power diepass="diepass" restartpass="restartpass" pause="2"> - - -#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This optional tag allows you to include another config file # -# allowing you to keep your configuration tidy. The configuration # -# file you include will be treated as part of the configuration file # -# which includes it, in simple terms the inclusion is transparent. # -# # -# All paths to config files are relative to the directory of the main # -# config file inspircd.conf, unless the filename starts with a forward# -# slash (/) in which case it is treated as an absolute path. # -# # -# Syntax is as follows: # -# <include file="file.conf"> # -# # - -#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#- -# # -# This is where you can configure which connections are allowed # -# and denied access onto your server. # -# The password is optional. # -# You may have as many of these as you require. # -# To allow/deny all connections use a * # -# # -# Syntax is as follows: # -# <connect allow="ip or host"> # -# <connect allow="ip or host" password="blahblah"> # -# <connect allow="ip or host" password="blah" timeout="10"> # -# <connect allow="ip or host" timeout="blah" flood="5"> # -# <connect allow="ip or host" threshold="8" pingfreq="120"> # -# <connect allow="ip or host" sendq="99999" revcq="696969"> # -# <connect deny="ip or host"> # -# # -# You may optionally include timeout="x" on any allow line, which # -# specifies the amount of time given before an unknown connection # -# is closed if USER/NICK/PASS are not given. This value is in secs # -# # -# You may also optionally include a flood="x" line which indicates # -# the number of lines a user may place into their buffer at once # -# before they are disconnected for excess flood. The default is to # -# DISABLE this feature. A recommended value is 10. A counter is # -# maintained for each user which is reset every 'threshold' seconds # -# and specifying this threshold value with threshold="X" indicates # -# how often the counter is reset. For example, with flood="5" and # -# threshold="8", the user may not send more than 5 lines in 8 secs. # -# # -# You may optionally specify the sendq size and ping frequency of # -# each connect:allow line using the pingfreq="X" and sendq="X" # -# settings as shown in the full example below. # -# The ping frequency is specified in seconds, and the sendq size # -# in bytes. It is recommended, although not enforced, that you # -# should never set your sendq size to less than 8k. Send Queues are # -# dynamically allocated and can grow as needed up to the maximum # -# size specified. # -# # -# The optional recvq value is the maximum size which users in this # -# group may grow their receive queue to. This is recommended to be # -# kept pretty low compared to the sendq, as users will always # -# recieve more than they send in normal circumstances. The default # -# if not specified is 4096. # -# # -# IMPORTANT NOTE, CALL THE CONFUSION POLICE! # -# The sendq is the data waiting to be sent TO THE USER. # -# The recvq is the data being received FROM THE USER. # -# The names sendq and recvq are from the SERVER'S PERSPECTIVE not # -# that of the user... Just to clear up any confusion or complaints # -# that these are backwards :p # -# # - -<connect allow="196.12.*" password="secret"> -<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096"> - -<connect deny="69.254.*"> - - -#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- -# # -# Classes are a group of commands which are grouped together # -# and given a unique name. They used to define which commands # -# are available to certain types of Operators. # -# # -# Syntax is as follow: # -# <class name="name" commands="oper commands"> # -# # - -<class name="Shutdown" commands="DIE RESTART REHASH"> -<class name="ServerLink" commands="CONNECT SQUIT"> -<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE SHUN"> -<class name="OperChat" commands="WALLOPS CHATOPS"> -<class name="HostCloak" commands="SETHOST SETIDENT SETNAME"> - - -#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# -# # -# This is where you specify which types of operators you have on # -# your server, as well as the commands they are allowed to use. # -# This works alongside with the classes specified above. # -# # -# type name - a name for the combined class types # -# classes - specified above, used for flexibility for the # -# server admin to decide on which operators get # -# what commands # -# host - hostmask operators will recieve on oper-up. # -#(optional) # -# # -# Syntax is as follows: # -# <type name="name" classes="class name" host="oper hostmask"> # -# # - -<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za"> -<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za"> -<type name="LocalOp" classes="OperChat BanControl HostCloak" host="local.omega.org.za"> -<type name="Helper" classes="HostCloak" host="helper.omega.org.za"> - - -#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Opers are defined here. This is a very important section. # -# Remember to only make operators out of truthworthy people. # -# # -# name - oper name, best to use lower-case # -# password - password to oper-up, # -# encryption not supported by inspircd. However, there # -# are modules that allow for oper password encryption. # -# # -# host - host of client allowed to oper-up, more hostmasks # -# seperated by spaces, wildcards accepted # -# type - specified above, defines the kind of operator # -# # -# Syntax is as follows: # -# <oper name="login" # -# password="pass" # -# host="hostmask@of.oper" # -# type="oper type"> # -# # - -<oper name="katsklaw" - password="s3cret" - host="*@*" - type="NetAdmin"> - - -#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# Defines which servers can link to this one, and which servers this # -# server may create outbound links to. # -# # -# name - The name is the canocial name of the server, it does # -# not have to resolve - but it is expected to be sent # -# in the remote servers connection info. # -# ipaddr - Valid host or ip address for remote server. * # -# port - Valid listening UDP port for remote server. # -# sendpass - Password to send to create an outbound connection to # -# this server. # -# recvpass - Password to receive to accept an inbound connection # -# from this server. # -# autoconnect - Sets the server to autoconnect. Where x is the number # -# (optional) of seconds between attempts. 300 = 5 minutes # -# # -# to u:line a server (give it extra privilages required for running # -# services, Q, etc) you must include the <uline server> tag as shown # -# in the example below. You can have as many of these as you like. # -# # -# WARNING: Unlike other ircds, u:lining a server allows ALL users on # -# that server to operoverride modes. This should only be used for # -# services and protected oper servers! # -# # -# IMPORTANT NOTE: When specifying the ip address and/or host, the # -# server software will prioritize RESOLVED hostnames above ip # -# addresses, so for example if your target server resolves to a.b.com # -# you MUST put a.b.com into your link block, and NOT the IP address # -# of a.b.com. The system uses reverse resolution. # -# # - -<link name="hub.penguin.org" - ipaddr="penguin.box.com" - port="7000" - autoconnect="300" - sendpass="outgoing!password" - recvpass="incoming!password"> - -<link name="services.antarctic.com" - ipaddr="localhost" - port="7000" - sendpass="penguins" - recvpass="polarbears"> - -<uline server="services.antarctic.com"> - - -#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# These options let you define the path to your motd and rules # -# files. # -# # - -<files motd="/home/cc/inspircd/conf/inspire.motd" - rules="/home/cc/inspircd/conf/inspire.rules"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Define your DNS server address here. InspIRCd has its own resolver # -# and you must define this otherwise nobody's host will resolve. The # -# timeout value is in seconds. # -# # - -<dns server="127.0.0.1" timeout="5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Define the path to the PID file here. The PID file can be used to # -# rehash the ircd from the shell or to terminate the ircd from the # -# shell using shell scripts, perl scripts etc, and to monitor the # -# ircd's state via cron jobs. # -# # - -<pid file="/path/to/inspircd.pid"> - -#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Use these tags to customise the ban limits on a per channel basis. # -# the tags are read from top to bottom, and any tag found which # -# matches the channels name applies the banlimit to that channel. # -# It is advisable to put an entry with the channel as '*' at the # -# bottom of the list. If none are specified or no maxbans tag is # -# matched, the banlist size defaults to 64 entries. # -# # - -<banlist chan="#morons" limit="128"> -<banlist chan="*" limit="69"> - -#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This tag is optional, and specifies one or more commands which are # -# not available to non-operators. For example you may wish to disable # -# NICK and prevent non-opers from changing their nicknames. # -# Note that any disabled commands take effect only after the user has # -# 'registered' (e.g. after the initial USER/NICK/PASS on connection) # -# so for example disabling NICK will not cripple your network. # -# # -# <disabled commands="TOPIC MODE"> # -# # - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Just remove this... Its here to make you read ALL of the config # -# file options ;) # - -<die value="You should probably edit your config *PROPERLY* and try again."> - - - -#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Settings to define which features are useable on your server. # -# # -# prefixquit - a prefix for a client's quit message # -# loglevel - specifies what detail of messages to log in the # -# log file. You may select from debug, verbose, # -# default, sparse and none. # -# allowhalfop - allows the +h channel mode # -# noservices - If noservices is true, yes, or 1, then the first # -# user into a channel gets founder status. This is # -# only useful on networks running the m_chanprotect # -# module without services. # -# netbuffersize - size of the buffer used to receive data from # -# clients. The ircd may only read() this amount # -# of text in one go at any time. (OPTIONAL) # -# maxwho - The maximum number of results returned by a /WHO # -# query. This is to prevent /WHO being used as a # -# spam vector or means of flooding an ircd. The # -# default is 128, it is not recommended to raise it # -# above 1024. Values up to 65535 are permitted. # -# somaxconn - The maximum number of sockets that may be waiting # -# in the accept queue. This usually allows the ircd # -# to soak up more connections in a shorter space of # -# time when increased but please be aware there is a # -# system defined maximum value to this, the same way # -# there is a system defined maximum number of file # -# descriptors. Some systems may only allow this to # -# be up to 5 (ugh) while others such as FreeBSD will # -# default to a much nicer 128. # -# moduledir - This optional value indicates a runtime change of # -# the location where modules are to be found. This # -# does not add a supplementary directory. There can # -# only be one module path. # -# softlimit - This optional feature allows a defined softlimit. # -# if defined sets a soft maxconnections value, has # -# to be less than the ./configure maxclients # -# # - -<options prefixquit="Quit: " - loglevel="default" - netbuffersize="10240" - maxwho="128" - noservices="0" - somaxconn="128" - softlimit="128" - allowhalfop="yes"> - - - -#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# These tags define which modules will be loaded on startup by your # -# server. Add modules without any paths. When you make your ircd # -# using the 'make' command, all compiled modules will be moved into # -# the folder you specified when you ran ./configure. The module tag # -# automatically looks for modules in this location. # -# If you attempt to load a module outside of this location, either # -# in the config, or via /LOADMODULE, you will receive an error. # -# # -# By default, ALL modules are commented out. You must uncomment them # -# or add lines to your config to load modules. Please refer to # -# http://www.inspircd.org/wiki/Modules_List for a list of modules and# -# each modules link for any additional conf tags they require. # -# # -# WINDOWS USERS PLEASE NOTE: You can still load these modules! They # -# are incorporated into the executable and can be loaded and removed # -# similarly to if they were in a ramdisk. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Foobar module - does nothing -#<module name="m_foobar.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Chanprotect module: gives +q and +a channel modes -#<module name="m_chanprotect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Globops module: gives /GLOBOPS and usermode +g -#<module name="m_globops.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Noinvite module: Gives channel mode +V -#<module name="m_noinvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MD5 module: Allows MD5 hashed oper passwords -#<module name="m_opermd5.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels -#<module name="m_restrictchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deny Channels: Deny Channels from being used by users -#<module name="m_denychans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -#<module name="m_services.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Userip module: Adds the /USERIP command -#<module name="m_userip.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alias module: Allows you to define server-side command aliases -#<module name="m_alias.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGHOST module: Adds the /CHGHOST command -#<module name="m_chghost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HELPOP module: Provides the /HELPOP command -#<module name="m_helpop.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No kicks module: Adds the +Q channel mode -#<module name="m_nokicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MOTD module: Provides support for seperate message of the day -# on oper-up -#<module name="m_opermotd.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict message module: Allows users to only message opers -#<module name="m_restrictmsg.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Sethost module: Adds the /SETHOST command -#<module name="m_sethost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibottler module: Labels bottler leech bots -#<module name="m_antibottler.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Watch module: Adds the WATCH command, which is used by clients to -# maintain notify lists. -#<module name="m_watch.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Cloaking module: Adds usermode +x and cloaking support -#<module name="m_cloaking.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Hostchange module: Allows a different style of cloaking -#<module name="m_hostchange.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No nicks module: Adds the +N channel mode -#<module name="m_nonicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Override module: Adds support for oper override -#<module name="m_override.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAJOIN module: Adds the /SAJOIN command -#<module name="m_sajoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Set Idle module: Adds a command for opers to change their -# idle time (mainly a toy) -#<module name="m_setidle.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block colour module: Adds the +c channel mode -#<module name="m_blockcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Lusers: Shows the LUSERS output on connect -#<module name="m_conn_lusers.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ident: Provides RFC 1413 ident lookup support -#<module name="m_ident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No Notice module: adds the channel mode +T -#<module name="m_nonotice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Parking module: Adds parking support and /PARK and /UNPARK -#<module name="m_park.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAMODE module: Adds the oper /SAMODE command -#<module name="m_samode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SETNAME module: Adds the /SETNAME command -#<module name="m_setname.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Botmode module: Adds the user mode +B -#<module name="m_botmode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Filter module: Provides glob-based message filtering -#<module name="m_filter.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Knock module: adds the /KNOCK command and +K channel mode -#<module name="m_knock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper channels mode: Adds the +O channel mode -#<module name="m_operchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Random Quote module: provides a random quote on connect -#<module name="m_randquote.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SANICK module: Allows opers to change user's nicks -#<module name="m_sanick.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Show Whois module: Adds the +W usermode which allows opers -# to see when they are whois'ed -#<module name="m_showwhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Strip colour module: Adds the channel mode +S -#<module name="m_stripcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Censor module: Adds the channel mode +G -#<module name="m_censor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nick locking module: Adds the oper-only /NICKLOCK command -#<module name="m_nicklock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper Join module: Forces opers to join a channel on oper-up -#<module name="m_operjoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Redirect module: Adds channel redirection (mode +L) -#<module name="m_redirect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAPART module: Adds the oper /SAPART command -#<module name="m_sapart.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SILENCE module: Adds support for /SILENCE -#<module name="m_silence.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test command module: Does nothing significant -#<module name="m_testcommand.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel filter module: Allows channel-op defined message -# filtering using simple string matches (channel mode +g) -#<module name="m_chanfilter.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No ctcp module: Adds the channel mode +C to block CTCPs -#<module name="m_noctcp.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper levels module: Gives each oper a level and prevents -# actions being taken against higher level opers -#<module name="m_operlevels.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Remove module: Adds the /REMOVE command which is a peaceful -# alternative to /KICK -#<module name="m_remove.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) -#<module name="m_saquit.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Timed bans module: Adds timed bans and the /TBAN command -#<module name="m_timedbans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper modes module: Allows you to specify modes to add/remove on oper -#<module name="m_opermodes.so"> - - -#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_filter.so module, then # -# specfiy below the path to the filter.conf file. # - -#<filter file="/path/to/inspircd/filter.conf"> - - -#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_helpop.so module, then # -# specify below the path to the helpop.conf file. # - -<die value="If you used the helpop include above then do *NOT* use this tag."> -#<helpop file="/path/to/inspircd/helpop.conf"> - - -#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_randquotes.so module, then # -# specify below the path to the randquotes.conf file. # - -#<randquote file="/path/to/inspircd/randquotes.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# The ban tags define nick masks, host masks and ip ranges which are # -# banned from your server. All details in these tags are local to # -# Your server. # -# # -# # -# badip lines ban an ip range (same as a zline) # -# # -# ipmask - The ip range to ban (wildcards possible) # -# reason - Reason to display when disconnected # -# # -# badnick lines ban a nick mask (same as a qline) # -# # -# nick - Nick mask to ban (wildcards possible) # -# reason - Reason to display on /NICK # -# # -# badhost lines ban a user@host mask (same as a kline) # -# # -# host - ident@hostname (wildcards possible) # -# reason - Reason to display on disconnection # -# # -# exception lines define a hostmask that is excempt from [kzg]lines # -# # -# host - ident@hostname (wildcards possible) # -# reason - Reason, shown only in /stats e # -# # - -<badip ipmask="69.69.69.69" reason="No porn here thanks."> - -<badnick nick="ChanServ" reason="Reserved For Services"> -<badnick nick="NickServ" reason="Reserved For Services"> -<badnick nick="OperServ" reason="Reserved For Services"> -<badnick nick="MemoServ" reason="Reserved For Services"> - -<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots"> -<badhost host="*@localhost" reason="No irc from localhost!"> - -<exception host="*@ircop.host.com" reason="Opers hostname"> - -#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_alias.so module loaded, you may also define # -# aliases as shown below. They are commonly used to provide shortcut # -# commands to services, however they are not limited to jsut this use.# -# An alias tag requires the following values to be defined in it: # -# # -# text - The text to detect at the start of the line, # -# must be at the start of the line to trigger the # -# alias. May contain spaces, but case insensitive. # -# replace - The text to replace 'text' with. Usually this # -# will be "PRIVMSG ServiceName" or similar. # -# requires - If you provide a value for 'requires' this means # -# the given nickname MUST be online for the alias # -# to successfully trigger. If they are not, then # -# the user receives a 'no such nick' 401 numeric. # -# uline - Defining this value with 'yes', 'true' or '1' # -# will ensure that the user given in 'requires' # -# must also be on a u-lined server, as well as # -# actually being on the network. If the user is # -# online, but not on a u-lined server, then an # -# oper-alert is sent out as this is possibly signs # -# of a user trying to impersonate a service. # -# # - -<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes"> -<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes"> -<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes"> -<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# You should already know what to do here :) # - -<die value="You should probably edit your config *PROPERLY* and try again."> - - -######################################################################### -# # -# -InspIRCd Development and Coding Team- # -# www.inspircd.org # -# # -######################################################################### |