summaryrefslogtreecommitdiff
path: root/docs/conf/inspircd.conf.example
diff options
context:
space:
mode:
authorPeter Powell <petpow@saberuk.com>2012-06-12 18:38:54 +0100
committerPeter Powell <petpow@saberuk.com>2012-06-12 18:38:54 +0100
commitc8e9bbbe40839848dad686bd6e96a64130ff094f (patch)
tree54c46b9c0206bfd1fcce347f6bc4dd3a4887f253 /docs/conf/inspircd.conf.example
parentcc3daff2126623e04824892a65c853be5a3ee0ff (diff)
Move all example configuration files to their own directory.
Diffstat (limited to 'docs/conf/inspircd.conf.example')
-rw-r--r--docs/conf/inspircd.conf.example963
1 files changed, 963 insertions, 0 deletions
diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf.example
new file mode 100644
index 000000000..d1293be25
--- /dev/null
+++ b/docs/conf/inspircd.conf.example
@@ -0,0 +1,963 @@
+########################################################################
+# #
+# ___ ___ ____ ____ _ #
+# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
+# | || '_ \/ __| '_ \| || |_) | | / _` | #
+# | || | | \__ \ |_) | || _ <| |__| (_| | #
+# |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
+# |_| #
+# ____ __ _ _ _ #
+# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
+# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
+# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
+# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
+# |___/ #
+# #
+##################################||####################################
+ #||#
+##################################||####################################
+# #
+# This is an example of the config file for InspIRCd. #
+# Change the options to suit your network #
+# #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
+# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
+# if you've configured InspIRCd before, these probably indicate #
+# something new or different to this version and you SHOULD READ IT. #
+# #
+########################################################################
+# #
+# Unalphabeticalise the modules list at your own risk #
+# #
+########################################################################
+
+#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to include another config file #
+# allowing you to keep your configuration tidy. The configuration #
+# file you include will be treated as part of the configuration file #
+# which includes it, in simple terms the inclusion is transparent. #
+# #
+# All paths to config files are relative to the directory that the #
+# process runs in. #
+# #
+# You may also include an executable file, in which case if you do so #
+# the output of the executable on the standard output will be added #
+# to your config at the point of the include tag. #
+# #
+# Syntax is as follows: #
+#<include file="file.conf"> #
+#<include executable="/path/to/executable parameters"> #
+# #
+# Executable Include Example: #
+#<include executable="/usr/bin/wget -q -O - http://mynet.net/inspircd.conf">
+# #
+
+
+#-#-#-#-#-#-#-#-#-#-#-# VARIABLE DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# You can define variables that will be substituted later in the #
+# configuration file. This can be useful to allow settings to be #
+# easily changed, or to parameterize a remote includes. #
+# #
+# Variables may be redefined and may reference other variables. #
+# Value expansion happens at the time the tag is read. #
+# #
+# Using variable definitions REQUIRES that the config format be #
+# changed to "xml" from the default "compat" that uses escape #
+# sequences such as "\"" and "\n", and does not support <define> #
+<config format="xml">
+<define name="bindip" value="1.2.2.3">
+<define name="localips" value="&bindip;/24">
+
+#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
+# #
+# Here is where you enter the information about your server. #
+# #
+
+<server
+ # name: Hostname of your server. Does not need to resolve, but
+ # does need to be correct syntax (something.somethingelse.tld).
+ name="penguin.omega.org.za"
+
+ # description: Server description. Spaces are allowed.
+ description="Waddle World"
+
+ # id: The SID to use for this server. This should not be uncommented
+ # unless there is a SID conflict. This must be three characters long.
+ # The first character must be a digit [0-9], the remaining two chars
+ # may be letters [A-Z] or digits.
+ #id="97K"
+
+ # network: Network name given on connect to clients.
+ # Should be the same on all servers on the network and
+ # not contain spaces.
+ network="Omega">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Describes the Server Administrator's real name (optionally), #
+# nick, and email address. #
+# #
+
+<admin
+ # name: Real Name
+ name="Johnny English"
+
+ # nick: Nickname (preferably what you use on the network)
+ nick="MI5"
+
+ # email: email address. Does not have to be valid
+ # but should be for the users to be able to contact you.
+ email="MI5@the.best.secret.agent">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
+# #
+# Enter the port and address bindings here. #
+# #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# If you want to link servers to InspIRCd you must load the #
+# m_spanningtree.so module! Please see the modules list below for #
+# information on how to load this module! If you do not load this #
+# module, server ports will NOT be bound! #
+# #
+# PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
+# specify a bind address if you want the IRCd to bind to a IPv4 IP. #
+
+<bind
+ # address: IP address to bind to if the box that you are hosting
+ # on has more than one IP, else the ircd will try to bind to all
+ # IP's on the box if this is not defined.
+ address=""
+
+ # port: Port for users or servers to be able to connect to.
+ # you can select multiple ports by separating them
+ # with a - character like the example below.
+ port="6697"
+
+ # type: Type of bind block this is. It can either be clients or
+ # servers. Whichever you select will be the only type able to connect
+ # to this bind section.
+ type="clients"
+
+ # ssl: If you want this bind section to use SSL, define either
+ # gnutls or openssl here. The appropriate SSL modules must be loaded
+ # for ssl to work. If you do not want this bind section to support ssl,
+ # just remove or comment out this option.
+ ssl="gnutls"
+>
+
+<bind address="" port="6660-6669" type="clients">
+
+# When linking servers, the openssl and gnutls implementations are completely
+# link-compatible and can be used alongside each other
+# on each end of the link without any significant issues.
+# Supported ssl types are: "openssl" and "gnutls".
+# You must load, m_ssl_openssl for openssl
+# or m_ssl_gnutls for gnutls.
+
+<bind address="" port="7000,7001" type="servers">
+<bind address="1.2.3.4" port="7005" type="servers" ssl="openssl">
+
+
+#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
+# #
+# You can configure the passwords here which you wish to use for #
+# the die and restart commands. Only trusted IRCop's who will #
+# need this ability should know the die and restart password. #
+# #
+
+<power
+ # hash: what hash these passwords are hashed with. requires the module
+ # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
+ # loaded and the password hashing module (m_password_hash.so)
+ # loaded. Options here are: "md5", "sha256" and "ripemd160".
+ # Optional, but recommended. Create hashed password with:
+ # /mkpasswd <hash> <password>
+ #hash="sha256"
+
+ # diepass: Password for opers to use if they need to shutdown (die)
+ # a server.
+ diepass=""
+
+ # restartpass: Password for opers to use if they need to restart
+ # a server.
+ restartpass="">
+
+
+#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# This is where you can configure which connections are allowed #
+# and denied access onto your server. The password is optional. #
+# You may have as many of these as you require. To allow/deny all #
+# connections, use a '*' or 0.0.0.0/0. #
+# #
+# -- It is important to note that connect tags are read from the -- #
+# TOP DOWN. This means that you should have more specific deny #
+# and allow tags at the top, progressively more general, followed #
+# by a <connect allow="*" (should you wish to have one). #
+# #
+# Connect blocks are searched twice for each user - once when the TCP #
+# connection is accepted, and once when the user completes their #
+# registration. Most of the information (hostname, ident response, #
+# password, SSL when using STARTTLS, etc) is only available during #
+# the second search, so if you are trying to make a closed server, #
+# you will probably need a connect block just for user registration. #
+# This can be done by using <connect registered="no"> #
+
+<connect
+ # deny: Will not let people connect if they have specified host/IP.
+ deny="69.254.*">
+
+# connect:reason is the message that users will see if they match a deny block
+<connect deny="3ffe::0/32" reason="The 6bone address space is deprecated">
+
+<connect
+ # name: Name to use for this connect block. Mainly used for
+ # connect class inheriting.
+ name="secret"
+
+ # parent: This setting is to specify if this connect class
+ # inherits settings from any other. Put the other class's name
+ # in here to use its settings as a template - for example, if
+ # you only want to adjust sendq and a password
+ parent="main"
+
+ # allow: What IP addresses/hosts to allow for this block.
+ allow="196.12.*"
+
+ # hash: what hash this password is hashed with. requires the module
+ # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
+ # loaded and the password hashing module (m_password_hash.so)
+ # loaded. Options here are: "md5", "sha256" and "ripemd160".
+ # Optional, but recommended. Create hashed password with:
+ # /mkpasswd <hash> <password>
+ #hash="sha256"
+
+ # password: Password to use for this block/user(s)
+ password="secret"
+
+ # maxchans: Maximum number of channels a user in this class
+ # be in at one time. This overrides every other maxchans setting.
+ #maxchans="30"
+
+ # timeout: How long (in seconds) the server will wait before
+ # disconnecting a user if they do not do anything on connect.
+ # (Note, this is a client-side thing, if the client does not
+ # send /nick, /user or /pass)
+ timeout="10"
+
+ # localmax: Maximum local connections per IP (or CIDR mask, see below).
+ localmax="3"
+
+ # globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
+ globalmax="3"
+
+ # maxconnwarn: Enable warnings when localmax or globalmax is hit (defaults to on)
+ maxconnwarn="off"
+
+ # useident: Defines if users in this class MUST respond to a ident query or not.
+ useident="no"
+
+ # limit: How many users are allowed in this class
+ limit="5000"
+
+ # modes: Usermodes that are set on users in this block on connect.
+ # Enabling this option requires that the m_conn_umodes module be loaded.
+ # This entry is highly recommended to use for/with IP Cloaking/masking.
+ # For the example to work, this also requires that the m_cloaking
+ # module be loaded as well.
+ modes="+x"
+
+ # requireident, requiressl, requireaccount: require that users of this
+ # block have a valid ident response, use SSL, or have authenticated.
+ # Requires m_ident, m_sslinfo, or m_services_account respectively.
+ requiressl="on"
+ # NOTE: For requireaccount, you must complete the signon prior to full
+ # connection. Currently, this is only possible by using SASL
+ # authentication; passforward and PRIVMSG NickServ happen after
+ # your final connect block has been found.
+
+ # Alternate MOTD file for this connect class. The contents of this file are
+ # specified using <files secretmotd="filename"> or <execfiles ...>
+ motd="secretmotd"
+
+ # port: What port this user is allowed to connect on. (optional)
+ # The port MUST be set to listen in the bind blocks above.
+ port="6697">
+
+<connect
+ # name: Name to use for this connect block. Mainly used for
+ # connect class inheriting.
+ name="main"
+
+ # allow: What IP addresses/hosts to allow for this block.
+ allow="*"
+
+ # maxchans: Maximum number of channels a user in this class
+ # be in at one time. This overrides every other maxchans setting.
+ #maxchans="30"
+
+ # timeout: How long (in seconds) the server will wait before
+ # disconnecting a user if they do not do anything on connect.
+ # (Note, this is a client-side thing, if the client does not
+ # send /nick, /user or /pass)
+ timeout="10"
+
+ # pingfreq: How often (in seconds) the server tries to ping connecting clients.
+ pingfreq="120"
+
+ # hardsendq: maximum amount of data allowed in a client's send queue
+ # before they are dropped. Keep this value higher than the length of
+ # your network's /LIST or /WHO output, or you will have lots of
+ # disconnects from sendq overruns!
+ hardsendq="1048576"
+
+ # softsendq: amount of data in a client's send queue before the server
+ # begins delaying their commands in order to allow the sendq to drain
+ softsendq="8192"
+
+ # recvq: amount of data allowed in a client's queue before they are dropped.
+ recvq="8192"
+
+ # threshold: This specifies the amount of command penalty a user is allowed to have
+ # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
+ # ones such as /OPER have penalties up to 10.
+ #
+ # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
+ # from processing some commands.
+ threshold="10"
+
+ # commandrate: This specifies the maximum rate that commands can be processed.
+ # If commands are sent more rapidly, the user's penalty will increase and they will
+ # either be fakelagged or killed when they reach the threshold
+ #
+ # Units are millicommands per second, so 1000 means one line per second.
+ commandrate="1000"
+
+ # fakelag: Use fakelag instead of killing users for excessive flood
+ #
+ # Fake lag stops command processing for a user when a flood is detected rather than
+ # immediately killing them; their commands are held in the recvq and processed later
+ # as the user's command penalty drops. Note that if this is enabled, flooders will
+ # quit with "RecvQ exceeded" rather than "Excess Flood".
+ fakelag="on"
+
+ # localmax: Maximum local connections per IP.
+ localmax="3"
+
+ # globalmax: Maximum global (network-wide) connections per IP.
+ globalmax="3"
+
+ # useident: Defines if users in this class must respond to a ident query or not.
+ useident="no"
+
+ # limit: How many users are allowed in this class
+ limit="5000"
+
+ # modes: Usermodes that are set on users in this block on connect.
+ # Enabling this option requires that the m_conn_umodes module be loaded.
+ # This entry is highly recommended to use for/with IP Cloaking/masking.
+ # For the example to work, this also requires that the m_cloaking
+ # module be loaded as well.
+ modes="+x">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
+# #
+# CIDR configuration allows detection of clones and applying of #
+# throttle limits across a CIDR range. (A CIDR range is a group of #
+# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
+# represented as 192.168.1.0/24). This means that abuse across an ISP #
+# is detected and curtailed much easier. Here is a good chart that #
+# shows how many IPs the different CIDRs correspond to: #
+# http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation #
+# #
+
+<cidr
+ # ipv4clone: specifies how many bits of an IP address should be
+ # looked at for clones. The default only looks for clones on a
+ # single IP address of a user. You do not want to set this
+ # extremely low. (Values are 0-32).
+ ipv4clone="32"
+
+ # ipv6clone: specifies how many bits of an IP address should be
+ # looked at for clones. The default only looks for clones on a
+ # single IP address of a user. You do not want to set this
+ # extremely low. (Values are 0-128).
+ ipv6clone="128">
+
+# This file has all the information about oper classes, types and o:lines.
+# You *MUST* edit it.
+<include file="conf/opers.conf.example">
+
+# This file has all the information about server links and ulined servers.
+# You *MUST* edit it if you intend to link servers.
+<include file="conf/links.conf.example">
+
+#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+
+# Files block - contains files whose contents are used by the ircd
+#
+# motd - displayed on connect and when a user executes /MOTD
+# rules - displayed when the user executes /RULES
+# Modules can also define their own files
+<files motd="conf/inspircd.motd.example" rules="conf/inspircd.rules.example">
+
+# Example of an executable file include. Note this will be read on rehash,
+# not when the command is run.
+#<execfiles rules="wget -O - http://www.example.com/rules.txt">
+
+#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+
+<channels
+ # users: Maximum number of channels a user can be in at once.
+ users="20"
+
+ # opers: Maximum number of channels a oper can be in at once.
+ opers="60">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# If these values are not defined, InspIRCd uses the default DNS resolver
+# of your system.
+
+<dns
+ # server: DNS server to use to attempt to resolve IP's to hostnames.
+ # in most cases, you won't need to change this, as inspircd will
+ # automatically detect the nameserver depending on /etc/resolv.conf
+ # (or, on windows, your set nameservers in the registry.)
+ # Note that this must be an IP address and not a hostname, because
+ # there is no resolver to resolve the name until this is defined!
+ #
+ # server="127.0.0.1"
+
+ # timeout: seconds to wait to try to resolve DNS/hostname.
+ timeout="5">
+
+# An example of using an IPv6 nameserver
+#<dns server="::1" timeout="5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Define the path to the PID file here. The PID file can be used to #
+# rehash the ircd from the shell or to terminate the ircd from the #
+# shell using shell scripts, perl scripts, etc... and to monitor the #
+# ircd's state via cron jobs. If this is a relative path, it will be #
+# relative to the configuration directory, and if it is not defined, #
+# the default of 'inspircd.pid' is used. #
+# #
+
+#<pid file="/path/to/inspircd.pid">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Use these tags to customise the ban limits on a per channel basis. #
+# The tags are read from top to bottom, and any tag found which #
+# matches the channels name applies the banlimit to that channel. #
+# It is advisable to put an entry with the channel as '*' at the #
+# bottom of the list. If none are specified or no maxbans tag is #
+# matched, the banlist size defaults to 64 entries. #
+# #
+
+<banlist chan="#morons" limit="128">
+<banlist chan="*" limit="69">
+
+#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This tag is optional, and specifies one or more features which are #
+# not available to non-operators. #
+# #
+# For example you may wish to disable NICK and prevent non-opers from #
+# changing their nicknames. #
+# Note that any disabled commands take effect only after the user has #
+# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
+# so for example disabling NICK will not cripple your network. #
+# #
+# You can also define if you want to disable any channelmodes #
+# or usermodes from your users. #
+# #
+# `fakenonexistant' will make the ircd pretend that nonexistant #
+# commands simply don't exist to non-opers ("no such command"). #
+# #
+#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Just remove this... Its here to make you read ALL of the config #
+# file options ;) #
+
+<die value="You should probably edit your config *PROPERLY* and try again.">
+
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Settings to define which features are usable on your server. #
+# #
+
+<options
+ # prefixquit: What (if anything) a users' quit message
+ # should be prefixed with.
+ prefixquit="Quit: "
+
+ # suffixquit: What (if anything) a users' quit message
+ # should be suffixed with.
+ suffixquit=""
+
+ # prefixpart: What (if anything) a users' part message
+ # should be prefixed with.
+ prefixpart="&quot;"
+ # NOTE: Use "\"" instead of "&quot;" if not using <config format="xml">
+
+ # suffixpart: What (if anything) a users' part message
+ # should be suffixed with.
+ suffixpart="&quot;"
+
+ # fixedquit: Set all users' quit messages to this value.
+ #fixedquit=""
+
+ # fixedpart: Set all users' part messages in all channels
+ # to this value.
+ #fixedpart=""
+
+ # syntaxhints: If enabled, if a user fails to send the correct parameters
+ # for a command, the ircd will give back some help text of what
+ # the correct parameters are.
+ syntaxhints="no"
+
+ # cyclehosts: If enabled, when a user gets a host set, it will cycle
+ # them in all their channels. If not, it will simply change their host
+ # without cycling them.
+ cyclehosts="yes"
+
+ # cyclehostsfromuser: If enabled, the source of the mode change for
+ # cyclehosts will be the user who cycled. This can look nicer, but
+ # triggers anti-takeover mechanisms of some obsolete bots.
+ cyclehostsfromuser="no"
+
+ # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
+ # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
+ # it will just message the user normally.
+ ircumsgprefix="no"
+
+ # announcets: If set to yes, when the TimeStamp on a channel changes, all users
+ # in channel will be sent a NOTICE about it.
+ announcets="yes"
+
+ # allowmismatched: Setting this option to yes will allow servers to link even
+ # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
+ # yes may introduce some desyncs and weirdness.
+ allowmismatched="no"
+
+ # defaultbind: Sets the default for <bind> tags without an address. Choices are
+ # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
+ # falling back to IPv4 otherwise.
+ defaultbind="auto"
+
+ # hostintopic: If enabled, channels will show the host of the topicsetter
+ # in the topic. If set to no, it will only show the nick of the topicsetter.
+ hostintopic="yes"
+
+ # pingwarning: If a server does not respond to a ping within x seconds,
+ # it will send a notice to opers with snomask +l informing that the server
+ # is about to ping timeout.
+ pingwarning="15"
+
+ # serverpingfreq: How often pings are sent between servers (in seconds).
+ serverpingfreq="60"
+
+ # defaultmodes: What modes are set on a empty channel when a user
+ # joins it and it is unregistered. This is similar to Asuka's
+ # autochanmodes.
+ defaultmodes="nt"
+
+ # moronbanner: This is the text that is sent to a user when they are
+ # banned from the server.
+ moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
+
+ # exemptchanops: exemptions for channel access restrictions based on prefix.
+ exemptchanops="nonick:v flood:o"
+
+ # invitebypassmodes: This allows /invite to bypass other channel modes.
+ # (Such as +k, +j, +l, etc)
+ invitebypassmodes="yes"
+
+ # nosnoticestack: This prevents snotices from 'stacking' and giving you
+ # the message saying '(last message repeated X times)'. Defaults to no.
+ nosnoticestack="no">
+
+
+#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
+# #
+
+<performance
+ # netbuffersize: Size of the buffer used to recieve data from clients.
+ # The ircd may only read this amount of text in 1 go at any time.
+ netbuffersize="10240"
+
+ # maxwho: Maximum number of results to show in a /who query.
+ maxwho="4096"
+
+ # somaxconn: The maximum number of connections that may be waiting
+ # in the accept queue. This is *NOT* the total maximum number of
+ # connections per server. Some systems may only allow this to be up
+ # to 5, while others (such as linux and *BSD) default to 128.
+ somaxconn="128"
+
+ # softlimit: This optional feature allows a defined softlimit for
+ # connections. If defined, it sets a soft max connections value.
+ # must be lower than ./configure maxclients.
+ softlimit="12800"
+
+ # quietbursts: When syncing or splitting from a network, a server
+ # can generate a lot of connect and quit messages to opers with
+ # +C and +Q snomasks. Setting this to yes squelches those messages,
+ # which makes it easier for opers, but degrades the functionality of
+ # bots like BOPM during netsplits.
+ quietbursts="yes"
+
+ # nouserdns: If enabled, no DNS lookups will be performed on
+ # connecting users. This can save a lot of resources on very busy servers.
+ nouserdns="no">
+
+#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
+# #
+
+<security
+
+ # announceinvites: If this option is set, then invites are announced
+ # to the channel when a user invites another user. If you consider
+ # this to be unnecessary noise, set this to 'none'.
+ # To announce to all ops, set this to 'ops' and to announce to all users,
+ # set the value to 'all'. The value 'dynamic' will make the messages
+ # go to every user who has power of INVITE on the channel. This
+ # is the recommended setting.
+ announceinvites="dynamic"
+
+ # hidemodes: If enabled, then the listmodes given will be hidden
+ # from users below halfop. This is not recommended to be set on +b
+ # as it may break some functionality in popular clients such as mIRC.
+ hidemodes="eI"
+
+ # hideulines: If this value is set to yes, U-lined servers will
+ # be hidden from non-opers in /links and /map.
+ hideulines="no"
+
+ # flatlinks: If this value is set to yes, /map and /links will
+ # be flattened when shown to non-opers.
+ flatlinks="no"
+
+ # hidewhois: When defined, the given text will be used in place
+ # of the server a user is on when whoised by a non-oper. Most
+ # networks will want to set this to something like "*.netname.net"
+ # to conceal the actual server a user is on.
+ # Note that enabling this will cause users' idle times to only be
+ # shown when the format /WHOIS <nick> <nick> is used.
+ hidewhois=""
+
+ # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
+ # only opers will see the ban message when the user is removed
+ # from the server.
+ hidebans="no"
+
+ # hidekills: If defined, replaces who set a /kill with a custom string.
+ hidekills=""
+
+ # hidesplits: If enabled, non-opers will not be able to see which
+ # servers split in a netsplit, they will only be able to see that one
+ # occurred (If their client has netsplit detection).
+ hidesplits="no"
+
+ # maxtargets: Maximum number of targets per command.
+ # (Commands like /notice, /privmsg, /kick, etc)
+ maxtargets="20"
+
+ # customversion: Displays a custom string when a user /version's
+ # the ircd. This may be set for security reasons or vanity reasons.
+ customversion=""
+
+ # operspywhois: show opers (users/auspex) the +s channels a user is in. Values:
+ # splitmsg Split with an explanatory message
+ # yes Split with no explanatory message
+ # no Do not show
+ operspywhois="no"
+
+ # runasuser: If this is set, InspIRCd will attempt to setuid
+ # to run as this user- allows binding of ports under 1024.
+ # NOT SUPPORTED/NEEDED UNDER WINDOWS.
+ #runasuser=""
+
+ # runasgroup: If this is set, InspIRCd will attempt to set group
+ # to run under this group, which allows binding of ports under 1024
+ # NOT SUPPORTED/NEEDED UNDER WINDOWS.
+ #runasgroup=""
+
+ # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
+ # banned on a channel to change nickname or message channels they are
+ # banned on.
+ restrictbannedusers="yes"
+
+ # genericoper: Setting this value to yes makes all opers on this server
+ # appear as 'is an IRC operator' in their WHOIS, regardless of their
+ # oper type, however oper types are still used internally. This only
+ # affects the display in WHOIS.
+ genericoper="no"
+
+ # userstats: /stats commands that users can run (opers can run all).
+ userstats="Pu">
+
+#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This configuration tag defines the maximum sizes of various types #
+# on IRC, such as the maximum length of a channel name, and the #
+# maximum length of a channel. Note that with the exception of the #
+# identmax value all values given here are the exact values you would #
+# expect to see on IRC. This contrasts with the older InspIRCd #
+# releases where these values would be one character shorter than #
+# defined to account for a null terminator on the end of the text. #
+# #
+# These values should match network-wide otherwise issues will occur. #
+# #
+# The highest safe value you can set any of these options to is 500, #
+# but it is recommended that you keep them somewhat #
+# near their defaults (or lower). #
+
+<limits
+ # maxnick: Maximum length of a nickname.
+ maxnick="31"
+
+ # maxchan: Maximum length of a channel name.
+ maxchan="64"
+
+ # maxmodes: Maximum number of mode changes per line.
+ maxmodes="20"
+
+ # maxident: Maximum length of a ident/username.
+ maxident="11"
+
+ # maxquit: Maximum length of a quit message.
+ maxquit="255"
+
+ # maxtopic: Maximum length of a channel topic.
+ maxtopic="307"
+
+ # maxkick: Maximum length of a kick message.
+ maxkick="255"
+
+ # maxgecos: Maximum length of a GECOS (realname).
+ maxgecos="128"
+
+ # maxaway: Maximum length of an away message.
+ maxaway="200">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Logging
+# -------
+#
+# Logging is covered with the <log> tag, which you may use to change
+# the behaviour of the logging of the IRCd.
+#
+# In InspIRCd as of 1.2, logging is pluggable and very extensible.
+# Different files can log the same thing, different 'types' of log can
+# go to different places, and modules can even extend the log tag
+# to do what they want.
+#
+# An example log tag would be:
+# <log method="file" type="OPER" level="default" target="opers.log">
+# which would log all information on /oper (failed and successful) to
+# a file called opers.log.
+#
+# There are many different types which may be used, and modules may
+# generate their own. A list of useful types:
+# - USERS - information relating to user connection and disconnection
+# - OPER - succesful and failed oper attempts
+# - KILL - kill related messages
+# - snomask - server notices (*all* snomasks will be logged)
+# - FILTER - messages related to filter matches (m_filter)
+# - CONFIG - configuration related messages
+# - COMMAND - die and restart messages, and messages related to unknown user types
+# - SOCKET - socket engine informational/error messages
+# - MODULE - module related messages
+# - STARTUP - messages related to starting up the server
+#
+# You may also log *everything* by using a type of *, and subtract things out
+# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
+#
+# Useful levels are:
+# - default (general messages, including errors)
+# - sparse (misc error messages)
+# - debug (debug messages)
+#
+# Some types only produce output in the debug level, those are:
+# - BANCACHE - ban cache debug messages
+# - CHANNELS - information relating to joining/creating channels
+# - CULLLIST - debug messages related to issues with removing users
+# - RESOLVER - DNS related debug messages
+# - CONNECTCLASS - Connection class debug messages
+# - USERINPUT
+# - USEROUTPUT
+#
+# The following log tag is highly default and uncustomised. It is recommended you
+# sort out your own log tags. This is just here so you get some output.
+
+<log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="ircd.log">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This tag lets you define the behaviour of the /whowas command of #
+# your server. #
+# #
+
+<whowas
+ # groupsize: Maximum entries per nick shown when performing
+ # a /whowas nick.
+ groupsize="10"
+
+ # maxgroups: Maximum number of nickgroups that can be added to
+ # the list so that /whowas does not use a lot of resources on
+ # large networks.
+ maxgroups="100000"
+
+ # maxkeep: Maximum time a nick is kept in the whowas list
+ # before being pruned. Time may be specified in seconds,
+ # or in the following format: 1y2w3d4h5m6s. Minimum is
+ # 1 hour.
+ maxkeep="3d">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# The ban tags define nick masks, host masks and ip ranges which are #
+# banned from your server. All details in these tags are local to #
+# Your server. #
+# #
+
+<badip
+ # ipmask: IP range to ban. Wildcards and CIDR can be used.
+ ipmask="69.69.69.69"
+
+ # reason: Reason to display when user is disconnected.
+ reason="No porn here thanks.">
+
+<badnick
+ # nick: Nick to disallow. Wildcards are supported.
+ nick="ChanServ"
+
+ # reason: Reason to display on /nick.
+ reason="Reserved For Services">
+
+<badnick nick="NickServ" reason="Reserved For Services">
+<badnick nick="OperServ" reason="Reserved For Services">
+<badnick nick="MemoServ" reason="Reserved For Services">
+
+<badhost
+ # host: ident@hostname to ban.
+ # Wildcards and CIDR (if you specify an IP) can be used.
+ host="*@hundredz.n.hundredz.o.1337.kiddies.com"
+
+ # reason: Reason to display when user is disconnected
+ reason="Too many 1337 kiddiots">
+
+<badhost host="root@*" reason="Don't irc as root!">
+<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
+
+# exception: Hosts that are exempt from [kgz]lines.
+<exception
+ # host: ident@hostname to exempt.
+ # Wildcards and CIDR (if you specify an IP) can be used.
+ host="*@ircop.host.com"
+
+ # reason: Reason for exception. Only shown in /stats e
+ reason="Opers hostname">
+
+#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to specify how wide a gline, eline, #
+# kline, zline or qline can be before it is forbidden from being #
+# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
+# no matter how many users the ban would cover. This is not #
+# recommended! By setting ipmasks="yes", you can allow all Z lines, #
+# no matter how many users these cover too. Needless to say we #
+# don't recommend you do this, or, set nickmasks="yes", which will #
+# allow any qline. #
+# #
+
+<insane
+ # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
+ hostmasks="no"
+
+ # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
+ ipmasks="no"
+
+ # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
+ nickmasks="no"
+
+ # trigger: What percentage of users on the network to trigger
+ # specifying an insane ban as. The default is 95.5%, which means
+ # if you have a 1000 user network, a ban will not be allowed if it
+ # will be banning 955 or more users.
+ trigger="95.5">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# You should already know what to do here :) #
+
+<die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# Well done, you've reached the end of the basic configuration, your #
+# ircd should now start if you want to try it out! (./inspircd start) #
+# #
+# We now suggest you read and edit modules.conf, as modules are what #
+# provide almost all the features of InspIRCd. :) #
+# #
+# The default does nothing -- we include it for simplicity for you. #
+<include file="conf/modules.conf.example">
+
+# Here are some pre-built modules.conf files that closely match the
+# default configurations of some popular IRCd's. You still may want to
+# look over them and make sure if everything is correct for you and setup
+# the proper SSL information.
+#
+# *NOTE*: These files have no comments for what the modules do. If you
+# are interested in that, please read the modules.conf.example. It is also
+# recommended that you make your own modules file based on modules.conf.example.
+
+# Settings similar to UnrealIRCd defaults.
+#<include file="conf/modules/modules.conf.unreal">
+
+# Settings similar to Charybdis IRCd defaults.
+#<include file="conf/modules/modules.conf.charybdis">
+
+
+#########################################################################
+# #
+# - InspIRCd Development Team - #
+# http://www.inspircd.org #
+# #
+#########################################################################