######################################################################## # # # ___ ___ ____ ____ _ # # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | # # | || '_ \/ __| '_ \| || |_) | | / _` | # # | || | | \__ \ |_) | || _ <| |__| (_| | # # |___|_| |_|___/ .__/___|_| \_\\____\__,_| # # |_| # # ____ __ _ _ _ # # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ # # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ # # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | # # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| # # |___/ # # # ##################################||#################################### #||# ##################################||#################################### # # # This is an example of the config file for InspIRCd. # # Change the options to suit your network # # # # $Id$ # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT # # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even # # if you've configured InspIRCd before, these probably indicate # # something new or different to this version and you SHOULD READ IT. # # # ######################################################################## # # # Unalphabeticalise the modules list at your own risk # # # ######################################################################## #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- # # # Here is where you enter the information about your server. # # # # Syntax is as follows: # # # # # # # #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Describes the Server Administrator's real name (optionally), # # nick, and email address. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Enter the port and address bindings here. # # # # bind address - specifies which address ports bind to. Leaving this # # field blank binds the port to all IPs available. # # # # port - The port number to bind to. You may specify a port # # range here, e.g. "6667-6669,7000,7001". If you do # # this, the server will count each port within your # # range as a seperate binding, making the above # # example equivalent to five seperate bind tags. # # A failure on one port in the range does not prevent # # the entire range from being bound, just that one # # port number. # # # # type - can be 'clients' or 'servers'. The clients type is # # a standard tcp based socket, the servers type is a # # also a TCP based connection but of a different # # format. SSL support is provided by modules, to # # enable SSL support, please read the module section # # of this configuration file. # # # # ssl - When using m_ssl_gnutls.so or m_ssl_openssl.so # # modules, you must define this value to use ssl on # # that port. valid values are 'gnutls' or 'openssl' # # respectively. If the module is not loaded, this # # setting is ignored. # # # # transport - If you have m_spanningtree.so loaded, along with # # either of the SSL modules (m_ssl_gnutls or # # m_ssl_openssl) or m_ziplinks.so, then you may make # # use of this value. # # setting it to 'openssl' or 'gnutls' or 'zip' # # indicates that the port should accept connections # # using the given transport name. Transports are # # layers which sit on top of a socket and change the # # way data is sent and received, e.g. encryption, # # compression, and other such things. Because this # # may not be limited in use to just encryption, # # the 'ssl' value used for client ports does not # # exist for servers, and this value is used instead. # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # # m_spanningtree module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server ports will NOT be bound! # # # # Leaving address empty binds to all available interfaces # # # # Syntax is as follows: # # # # # # # # # # If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, # # then you can specify IPV4 ip addresses here to bind. You may also # # use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 # # address to bind the port, but as of InspIRCd 1.1.1, this is not # # required. # # # # ------------------------------------------------------------------- # # # # PLEASE NOTE: If you have build InspIRCd as an ipv6 server, and you # # specify an empty bind address, the binding will be bound to ALL THE # # IPV6 IP ADDRESSES, and not the ipv4 addresses. If you are using an # # ipv6 enabled InspIRCd and want to bind to multiple IPV4 addresses # # in this way, you must specify them by hand. If you have built the # # server for ipv4 connections only, then specifying an empty bind # # address binds the port to all ipv4 IP addresses, as expected. # # # # When linking servers, the openssl and gnutls transports are largely # link-compatible and can be used alongside each other or either/or # on each end of the link without any significant issues. #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- # # # You can configure the passwords here which you wish to use for # # the die and restart commands. Only trusted ircops who will # # need this ability should know the die and restart password. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional tag allows you to include another config file # # allowing you to keep your configuration tidy. The configuration # # file you include will be treated as part of the configuration file # # which includes it, in simple terms the inclusion is transparent. # # # # All paths to config files are relative to the directory of the main # # config file inspircd.conf, unless the filename starts with a forward# # slash (/) in which case it is treated as an absolute path. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you can configure which connections are allowed # # and denied access onto your server. The password is optional. # # You may have as many of these as you require. To allow/deny all # # connections, use a '*' or 0.0.0.0/0. # # # # Syntax is as follows: # # # # # # # # # # # # IP masks may be specified in CIDR format or wildcard format, # # for IPV4 and IPV6. You *cannot* use hostnames in the allow or # # deny field, as the state is applied before the user's DNS has # # been resolved. # # # # You may optionally include timeout="x" on any allow line, which # # specifies the amount of time given before an unknown connection # # is closed if USER/NICK/PASS are not given. This value is in secs # # # # You should also include a flood="x" line which indicates # # the number of lines a user may place into their buffer at once # # before they are disconnected for excess flood. This feature can # # not be disabled, however it can be set to extremely high values, # # rendering it effectively disabled. A recommended value is 10. # # A counter is maintained for each user which is reset every # # 'threshold' seconds and specifying this threshold value with # # threshold="X" indicates how often the counter is reset. For # # example, with flood="5" and threshold="8", the user may not send # # more than 5 lines in 8 secs. # # # # You may optionally specify the sendq size and ping frequency of # # each connect:allow line using the pingfreq="X" and sendq="X" # # settings as shown in the full example below. # # The ping frequency is specified in seconds, and the sendq size # # in bytes. It is recommended, although not enforced, that you # # should never set your sendq size to less than 8k. Send Queues are # # dynamically allocated and can grow as needed up to the maximum # # size specified. # # # # The optional recvq value is the maximum size which users in this # # group may grow their receive queue to. This is recommended to be # # kept pretty low compared to the sendq, as users will always # # receive more than they send in normal circumstances. The default # # if not specified is 4096. # # # # The sendq is the data waiting to be sent TO THE USER. # # The recvq is the data being received FROM THE USER. # # The names sendq and recvq are from the SERVER'S PERSPECTIVE not # # that of the user... Just to clear up any confusion or complaints # # that these are backwards :p # # # # The localmax and globalmax values can be used to enforce local # # and global session limits on connections. The session limits are # # counted against all users, but applied only to users within the # # class. For example, if you had a class 'A' which has a session # # limit of 3, and a class 'B' which has a session limit of 5, and # # somehow, two users managed to get into class B which also match # # class A, there is only one connection left for this IP now in A, # # but if they can connect again to B, there are three. You get the # # idea (i hope). # # # # The optional port value determines which port the connect tag is # # handling. If left out the connect tag covers all bound ports else # # only incoming connections on the specified port will match. Port # # tags may be used on connect allow and connect deny tags. # # # #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Classes are a group of commands which are grouped together # # and given a unique name. They used to define which commands # # are available to certain types of Operators. # # # # Syntax is as follows: # # # # # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # You are not forced to give these classes the names given below. # # You can create your own named classes, if you want, in fact that # # is the whole idea of this system! # # # # Note: It is possible to make a class which covers all available # # commands. To do this, specify commands="*". This is not really # # recommended, as it negates the whole purpose of the class system, # # however it is provided for fast configuration (e.g. in test nets) # # # #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you specify which types of operators you have on # # your server, as well as the commands they are allowed to use. # # This works alongside with the classes specified above. # # # # type name - a name for the combined class types # # a type name cannot contain spaces, however if you # # put an _ symbol in the name, it will be translated # # to a space when displayed in a WHOIS. # # # # classes - specified above, used for flexibility for the # # server admin to decide on which operators get # # what commands. Class names are case sensitive, # # seperate multiple class names with spaces. # # # # host - optional hostmask operators will receive on oper-up. # # # # Syntax is as follows: # # # # # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # You are not forced to give these types the names given below. # # You can create your own named types, if you want, in fact that # # is the whole idea of this system! # # # #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Opers are defined here. This is a very important section. # # Remember to only make operators out of truthworthy people. # # # # name - oper name, This is case sensitive, so it is best to # # use lower-case. # # # # password - password to oper-up, also case sensitive. # # encryption is supported via modules. You may load # # modules for MD5 or SHA256 encryption, and if you do, # # this value will be a hash value, otherwise put a # # plaintext password in this value. # # # # host - hosts of client allowed to oper-up. # # wildcards accepted, seperate multiple hosts with a # # space. You may also specify CIDR ip addresses. # # # # fingerprint - When using the m_ssl_oper_cert.so module, you may # # specify a key fingerprint here. This can be obtained # # using the /fingerprint command whilst the module is # # loaded, or from the notice given to you when you # # connect to the ircd using a client certificate, # # and will lock this oper block to only the user who # # has that specific key/certificate pair. # # This enhances security a great deal, however it # # requires that opers use clients which can send ssl # # client certificates, if this is configured for that # # oper. Note that if the m_ssl_oper.so module is not # # loaded, and/or one of m_ssl_openssl or m_ssl_gnutls # # is not loaded, this configuration option has no # # effect and will be ignored. # # # # type - Defines the kind of operator. This must match a type # # tag you defined above, and is case sensitive. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Defines which servers can link to this one, and which servers this # # server may create outbound links to. # # # # name - The name is the canocial name of the server, does # # not have to resolve - but it is expected to be set # # in the remote servers connection info. # # # # ipaddr - Valid host or ip address for remote server. These # # hosts are resolved on rehash, and cached, if you # # specify a hostname, so if you find that your server # # is still trying to connect to an old IP after you # # have updated your dns, try rehashing and then # # attempting the connect again. # # # # port - The TCP port for the remote server. # # # # sendpass - Password to send to create an outbound connection # # to this server. # # # # recvpass - Password to receive to accept an inbound connection # # from this server. # # # # autoconnect - Sets the server to autoconnect. Where x is the num. # # (optional) of seconds between attempts. e.g. 300 = 5 minutes. # # # # transport - If defined, this is a transport name implemented by # # another module. Transports are layers on top of # # plaintext connections, which alter them in certain # # ways. Currently the three supported transports are # # 'openssl' and 'gnutls' which are types of SSL # # encryption, and 'zip' which is for compression. # # If you define a transport, both ends of the # # connection must use a compatible transport for the # # link to succeed. OpenSSL and GnuTLS are link- # # compatible with each other. # # # # hidden - When using m_spanningtree.so for linking. you may # # set this to 'yes', and if you do, the IP address/ # # hostname of this connection will NEVER be shown to # # any opers on the network. In /STATS c its address # # will show as *@, and during CONNECT and # # inbound connections, its IP will show as # # UNLESS the connection fails (e.g. due to a bad # # password or servername) # # # # allowmask - When this is defined, it indicates a range of IP # # addresses to allow for this link (You may use CIDR # # or wildcard form for this address). # # e.g. if your server is going to connect to you from # # the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 # # into this value. If it is not defined, then only # # the ipaddr field of the server shall be allowed. # # # # failover - If you define this option, it must be the name of a # # different link tag in your configuration. This # # option causes the ircd to attempt a connection to # # the failover link in the event that the connection # # to this server fails. For example, you could define # # two hub uplinks to a leaf server, and set an # # american server to autoconnect, with a european # # hub as its failover. In this situation, your ircd # # will only try the link to the european hub if the # # american hub is unreachable. NOTE that for the # # intents and purposes of this option, an unreachable # # server is one which DOES NOT ANSWER THE CONNECTION. # # If the server answers the connection with accept(), # # EVEN IF THE CREDENTIALS ARE INVALID, the failover # # link will not be tried! Failover settings will also # # apply to autoconnected servers as well as manually # # connected ones. # # # # timeout - If this is defined, then outbound connections will # # time out if they are not connected within this many # # seconds. If this is not defined, the default of ten # # seconds is used. # # # # bind - If you specify this value, then when creating an # # outbound connection to the given server, the IP you # # place here will be bound to. This is for multi- # # homed servers which may have multiple IP addresses. # # If you do not define this value, the first IP that # # is not empty or localhost from your tags # # will be bound to. This is usually acceptable, # # however if your server has multiple network cards # # then you may have to manually specify the bind # # value instead of leaving it to automatic binding. # # You can usually tell if you need to set this by # # looking for the error 'Could not assign requested # # address' in your log when connecting to servers. # # # # hidden - If this is set to true, yes, or 1, then the server # # is completely hidden from non-opers. It does not # # show in LINKS and it does not show in MAP. Also, # # any servers which are child servers of this one # # in the network will *also* be hidden. Use with # # care! You can use this to 'mask off' sections of # # the network so that users only see a small portion # # of a much larger net. It should NOT be relied upon # # as a security tool, unless it is being used for # # example to hide a non-client hub, for which clients # # do not have an IP address or resolvable hostname. # # # # to u:line a server (give it extra privilages required for running # # services, Q, etc) you must include the tag as shown # # in the example below. You can have as many of these as you like. # # # # WARNING: Unlike other ircds, u:lining a server allows ALL users on # # that server to operoverride modes. This should only be used for # # services and protected oper servers! # # # # ------------------------------------------------------------------- # # # # NOTE: If you have built your server as an ipv6 server, then when a # # DNS lookup of a server's host occurs, AAAA records (ipv6) are # # priorotized over A records (ipv4). Therefore, if the server you are # # connecting to has both an IPV6 ip address and an IPV4 ip address in # # its DNS entry, the IPV6 address will *always* be selected. To # # change this behaviour simply specify the IPV4 IP address rather # # than the hostname of the server. # # # # ------------------------------------------------------------------- # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # # m_spanningtree module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server links will NOT work! # # # # Also, if you define any transports, you must load the modules for # # these transports BEFORE you load m_spanningtree, e.g. place them # # above it in the configuration file. Currently this means the three # # modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on # # which you choose to use. # # # #-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # This tag defines a ulined server. A U-Lined server has special # # permissions, and should be used with caution. Services servers are # # usually u-lined in this manner. # # # # The 'silent' value if set to yes indicates that this server should # # not generate quit and connect notices, which can cut down on noise # # to opers on the network. # # # #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # These options let you define the path to your motd and rules # # files. If these are relative paths, they are relative to the # # configurtion directory. # # # #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional configuration tag lets you define the maximum number # # of channels that both opers and users may be on at any one time. # # the default is 20 for user and 60 for opers if this tag is not # # defined. Remote users are not restricted in any manner. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define your DNS server address here. InspIRCd has its own resolver. # # If you do not define this value, the first dns server from your # # /etc/resolv.conf file is read. If no entries are found in this file # # or the file cannot be opened, the default value '127.0.0.1' is used # # instead. The timeout value is in seconds. # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # When choosing a server, be sure to choose one which will do a # # RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these # # recursive lookups itself, to save time and resources. The dns # # server recommended by the InspIRCd team is bind, available from the # # ISC website. If your DNS server does not do a recursive lookup, you # # will be able to notice this by the fact that none of your users are # # resolving even though the DNS server appears to be up! Most ISP and # # hosting provider DNS servers support recursive lookups. # # # # ------------------------------------------------------------------- # # # # NOTE: if you have built InspIRCd with IPV6 support, then both # # ipv6 and ipv4 addresses are allowed here, and also in the system # # resolv.conf file. Remember that an ipv4 dns server can still # # resolve ipv6 addresses, and vice versa. # # # # An example of using an IPV6 nameserver # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts etc, and to monitor the # # ircd's state via cron jobs. If this is a relative path, it will be # # relative to the configuration directory, and if it is not defined, # # the default of 'inspircd.pid' is used. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # # the tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # # matched, the banlist size defaults to 64 entries. # # # #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag is optional, and specifies one or more commands which are # # not available to non-operators. For example you may wish to disable # # NICK and prevent non-opers from changing their nicknames. # # Note that any disabled commands take effect only after the user has # # 'registered' (e.g. after the initial USER/NICK/PASS on connection) # # so for example disabling NICK will not cripple your network. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Just remove this... Its here to make you read ALL of the config # # file options ;) # #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Settings to define which features are useable on your server. # # # # prefixquit - A prefix to be placed on the start of a client's # # quit message # # # # suffixquit - A suffix to be placed on the end of a client's # # quit message. # # # # fixedquit - A fixed quit message to display for all client # # QUITS. If specified, overrides both prefixquit # # and suffixquit options. # # # # loglevel - specifies what detail of messages to log in the # # log file. You may select from debug, verbose, # # default, sparse and none. # # # # allowhalfop - allows the +h channel mode # # # # noservices - If noservices is true, yes, or 1, then the first # # user into a channel gets founder status. This is # # only useful on networks running the m_chanprotect # # module without services. # # # # qaprefixes - If qaprefixes is true, yes, or 1, then users # # with +q or +a will get the ~ or & prefixes # # used in unreal. This is only useful on networks # # running the m_chanprotect module # # # # deprotectself - If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # # themselves. The default setting is to not enable # # this feature, which stops even the founder taking # # away their founder status without using services. # # # # deprotectothers-If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # # other users. The default setting is to not enable # # this feature, so that only +q may remove +a, and # # nothing but services may remove +q. # # # # cyclehosts - If this is set to true, yes or 1, then when a # # user's hostname changes, they will appear to quit # # and then rejoin with their new host. This prevents # # clients from being confused by host changes, # # especially in the case of bots, and it is # # recommended that this option is enabled. # # # # netbuffersize - size of the buffer used to receive data from # # clients. The ircd may only read() this amount # # of text in one go at any time. (OPTIONAL) # # # # maxwho - The maximum number of results returned by a /WHO # # query. This is to prevent /WHO being used as a # # spam vector or means of flooding an ircd. The # # default is 128, it is not recommended to raise it # # above 1024. Values up to 65535 are permitted. # # # # somaxconn - The maximum number of sockets that may be waiting # # in the accept queue. This usually allows the ircd # # to soak up more connections in a shorter space of # # time when increased but please be aware there is a # # system defined maximum value to this, the same way # # there is a system defined maximum number of file # # descriptors. Some systems may only allow this to # # be up to 5 (ugh) while others such as FreeBSD will # # default to a much nicer 128. # # # # moduledir - This optional value indicates a runtime change of # # the location where modules are to be found. This # # does not add a supplementary directory. There can # # only be one module path. # # # # softlimit - This optional feature allows a defined softlimit. # # if defined sets a soft maxconnections value, has # # to be less than the ./configure maxclients # # # # userstats - The userstats field is optional and specifies # # which stats characters in /STATS may be requested # # by non-operators. Stats characters in this field # # are case sensitive and are allowed to users # # independent of if they are in a module or the core # # # # operspywhois - If this is set then when an IRC operator uses # # /WHOIS on a user they will see all channels, even # # ones if channels are secret (+s), private (+p) or # # if the target user is invisible +i. # # # # customversion - If you specify this configuration item, and it is # # not set to an empty value, then when a user does # # a /VERSION command on the ircd, this string will # # be displayed as the second portion of the output, # # replacing the system 'uname', compile flags and # # socket engine/dns engine names. You may use this # # to enhance security, or simply for vanity. # # # # maxtargets - The maxtargets field is optional, and if not # # defined, defaults to 20. It indicates the maximum # # number of targets which may be given to commands # # such as PRIVMSG, KICK etc. # # # # hidesplits - When set to 'yes', will hide split server names # # from non-opers. Non-opers will see '*.net *.split' # # instead of the server names in the quit message, # # identical to the way IRCu displays them. # # # # hidebans - When set to 'yes', will hide gline, kline, zline # # and qline quit messages from non-opers. For # # example, user A who is not an oper will just see # # (G-Lined) while user B who is an oper will see the # # text (G-Lined: Reason here) instead. # # # # hidewhois - When defined with a non-empty value, the given # # text will be used in place of the user's server # # in WHOIS, when a user is WHOISed by a non-oper. # # For example, most nets will want to set this to # # something like '*.netname.net' to conceal the # # actual server the user is on. # # # # flatlinks - When you are using m_spanningtree.so, and this # # value is set to true, yes or 1, /MAP and /LINKS # # will be flattened when shown to a non-oper. # # # # hideulines - When you are using m_spanningtree.so, and this # # value is set to true, yes or 1, then U-lined # # servers will be hidden in /LINKS and /MAP. For non # # opers. Please be aware that this will also hide # # any leaf servers of a U-lined server, e.g. jupes. # # # # nouserdns - If set to 'yes', 'true' or '1', no user dns # # lookups will be performed for connecting users. # # this can save a lot of resources on very busy irc # # servers. # # # # syntaxhints - If set to 'yes', 'true' or '1', when a user does # # not give enough parameters for a command, a syntax # # hint will be given (using the RPL_TEXT numeric) # # as well as the standard ERR_NEEDMOREPARAMS. # # # # announcets - If this value is defined to 'yes', 'true' or '1', # # then if a channel's timestamp is updated the users # # on the channel will be informed of the change via # # a server notice to the channel with the old and # # new TS values in the timestamp. If you think this # # is just pointless noise, define the value to 0. # # # # ircumsgprefix - Use undernet style message prefix for channel # # NOTICE and PRIVMSG adding the prefix to the line # # of text sent out. Eg. NOTICE @#test :@ testing # # vs. the off setting: NOTICE @#test :testing # # # # hostintopic - If this is set to yes (the default) then the full # # nick!user@host is shown for who set a TOPIC last. # # if set to no, then only the nickname is shown. # # # # announceinvites # # - If this option is set to yes (the default), then # # invites are announced to the channel when a user # # invites annother user. If you consider this to be # # unnecessary noise, explicitly set this to no. # # # # disablehmac - If you are linking your InspIRCd to older versions # # then you can specify this option and set it to # # yes. 1.1.6 and above support HMAC and challenge- # # response for password authentication. These can # # greatly enhance security of your server to server # # connections when you are not using SSL (as is the # # case with a lot of larger networks). Linking to # # older versions of InspIRCd should not *usually* be # # a problem, but if you have problems with HMAC # # authentication, this option can be used to turn it # # off. # # # # hidemodes - If this option is enabled, then the listmodes # # given (e.g. +eI), will be hidden from users below # # halfop. This is not recommended to be set on mode # # +b, as it may break some features in popular # # clients such as mIRC. # # # # quietbursts - When synching or splitting from the network, a # # server can generate a lot of connect and quit # # snotices to the +C and +Q snomasks. Setting this # # value to yes squelches those messages, which can # # make them more useful for opers, however it will # # degrade their use by certain third party programs # # such as BOPM which rely on them to scan users when # # a split heals in certain configurations. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#- TIME SYNC OPTIONS -#-#-#-#-#-#-#-#-#-#-#-# # Time sychronization options for m_spanningtree linking. # # # # Because IRC is very time and clock dependent, InspIRCd provides its # # own methods for syncronization of time between servers as shown # # in the example below, for servers that don't have ntpd running. # # # # enable - If this value is 'yes', 'true', or '1', time # # synchronization is enabled on this server. This # # means any servers you are linked to will # # automatically synchronize time, however you should # # use ntpd instead where possible, NOT this option. # # # # master - If this value is set to yes, then this server will # # act as the authoritative time source for the whole # # network. All other servers will respect its time # # without question, and match their times to it. # # only one server should have the master value set # # to 'yes'. # # # #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag lets you define the behaviour of the /whowas command of # # your server. # # # # groupsize - Controls the maximum entries per nick shown when # # performing a /whowas nick. Setting this to 0 dis- # # ables whowas completely. # # # # maxgroups - The maximum number of nickgroups that can be added # # to the list. If max is reached, oldest group will # # be deleted first like a FIFO. A groupsize of 3 and # # a maxgroups of 5000 will allow for 5000 nicks to # # be stored with a history of 3, thus giving a total # # of 3 * 5000 = 15000 entries. A setting of 0 dis- # # ables whowas completely. # # # # maxkeep - The maximum time a nick is kept in the whowas list # # before being pruned. Time may be specified in # # seconds, or in the following format: 1y2w3d4h5m6s # # meaning one year, two weeks, three days, 4 hours, # # 5 minutes and 6 seconds. All fields in this format # # are optional. Minimum is 1 hour, if less InspIRCd # # will default back to 1 hour. # # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # These tags define which modules will be loaded on startup by your # # server. Add modules without any paths. When you make your ircd # # using the 'make' command, all compiled modules will be moved into # # the folder you specified when you ran ./configure. The module tag # # automatically looks for modules in this location. # # If you attempt to load a module outside of this location, either # # in the config, or via /LOADMODULE, you will receive an error. # # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # # http://www.inspircd.org/wiki/Modules_List for a list of modules and# # each modules link for any additional conf tags they require. # # # # You may use wildcards in a tag to load all modules which # # match a glob pattern (e.g. m_sa????.so would load m_sajoin, # # m_sapart, m_saquit and m_sanick) # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # To link servers to InspIRCd, you MUST load the m_spanningtree # # module, as shown below. If you DO NOT do this, server links will # # NOT work at all. ie. The ports will NOT bind, and /connect will not # # work properly. This is by design, to allow for the implementation # # of other linking protocols in modules in the future. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spanning Tree module - allows linking of servers using the spanning # tree protocol (see the READ THIS BIT section above). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MD5 Module - Allows other modules to generate MD5 hashes, usually for # cryptographic uses and security. # # IMPORTANT: # Other modules such as m_cloaking.so and m_opermd5.so may rely on # this module being loaded to function. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 Module - Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules such as m_opermd5.so may rely on this module being # loaded to function. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alias module: Allows you to define server-side command aliases # # #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_alias.so module loaded, you may also define # # aliases as shown below. They are commonly used to provide shortcut # # commands to services, however they are not limited to just this use.# # An alias tag requires the following values to be defined in it: # # # # text - The text to detect as the actual command line, # # Cant contain spaces, but case insensitive. # # You may have multiple aliases with the same # # command name (text="" value), however the first # # found will be executed if its format value is # # matched, or it has no format value. Aliases are # # read from the top of the file to the bottom. # # # # format - If this is defined, the parameters of the alias # # must match this glob pattern. For example if you # # want the first parameter to start with a # for # # the alias to be executed, set format="#*" in the # # alias definition. Note that the :'s which are # # part of IRC formatted lines will be preserved # # for matching of this text. This value is # # optional. # # # # replace - The text to replace 'text' with. Usually this # # will be "PRIVMSG ServiceName :$2-" or similar. # # You may use the variables $1 through $9 in the # # replace string, which refer to the first through # # ninth word in the original string typed by the # # user. You may also use $1- through $9- which # # refer to the first word onwards, through to the # # ninth word onwards, e.g. if the user types the # # command "foo bar baz qux quz" then $3- will hold # # "baz qux quz" and $2 will contain "bar". You may # # also use the special variables: $nick, $ident, # # $host and $vhost, and you may seperate multiple # # commands with \n. If you wish to use the ACTUAL # # characters \ and n together in a line, you must # # use the sequence "\\n". # # # # requires - If you provide a value for 'requires' this means # # the given nickname MUST be online for the alias # # to successfully trigger. If they are not, then # # the user receives a 'no such nick' 401 numeric. # # # # uline - Defining this value with 'yes', 'true' or '1' # # will ensure that the user given in 'requires' # # must also be on a u-lined server, as well as # # actually being on the network. If the user is # # online, but not on a u-lined server, then an # # oper-alert is sent out as this is possibly signs # # of a user trying to impersonate a service. # # # # operonly - Defining this value, with a value of 'yes', '1' # # or true will make the alias oper only. If a non- # # oper attempts to use the alias, it will appear # # to not exist. # # # # # # # # # # # An example of using the format value to create an alias with two # different behaviours depending on the format of the parameters. # # # # # # This alias fixes a glitch in xchat 2.6.x and above and the way it # assumes IDENTIFY must be prefixed by a colon (:) character. It should # be placed ABOVE the default NICKSERV alias (the first example) listed # above. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alltime module: Shows time on all connected servers at once # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Antibear security module: Prevents 'bear.txt' based trojans from # connecting to your network by sending them a numeric they can't handle. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Antibottler module: Labels bottler leech bots # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Auditorium module: Adds channel mode +u which makes everyone else # except you in the channel invisible, used for large meetings etc. # # # Auditorium settings: # # # # Setting this value to yes makes m_auditorium behave like unrealircd # +u channel mode, e.g. ops see users joining, parting, etc, and users # joining the channel see the ops. Without this flag, the mode acts # like ircnet's +a (anonymous channels), showing only the user in the # names list, and not even showing the ops in the list, or showing the # ops that the user has joined. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban except module: Adds support for channel ban exceptions (+e) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban redirection module: Allows bans which redirect to a specified # channel. e.g. +b nick!ident@host#channelbanneduserissentto # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block amsg module: Attempt to block all usage of /amsg and /ame # # #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_blockamsg.so module loaded, you can configure it # # with the tag: # # # # delay - How many seconds between two messages to force # # them to be recognised as unrelated. # # action - Any of 'notice', 'noticeopers', 'silent', 'kill' # # or 'killopers'. Define how to take action when # # a user uses /amsg or /ame. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block CAPS module: Blocking all-CAPS messages with cmode +P # # # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # percent - How many percent of text must be caps before text # # will be blocked. # # # # minlen - The minimum length a line must be for the block # # percent to have any effect. # # # # capsmap - A list of chars to be considered CAPS, this was # # you can add CAPS for your language. Also you can # # add things like ! and space to further lock down # # on caps usage. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block colour module: Blocking colour-coded messages with cmode +c # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Botmode module: Adds the user mode +B # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CBAN module: Lets you disallow channels from being used at runtime. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Censor module: Adds the channel mode +G # # #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_censor module, then you must # # specify some censor tags. See also: # # http://www.inspircd.org/wiki/Censor_Module # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CGI:IRC module: Adds support for automatic host changing in CGI:IRC # (http://cgiirc.sourceforge.net). # # #-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # # Optional - If you specify to use m_cgiirc, then you must specify one # or more cgihost tags which indicate authorized CGI:IRC servers which # will be connecting to your network, and an optional cgiirc tag. # For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module # # Set to yes if you want to notice opers when CGI clients connect # # # The type field indicates where the module should get the real # client's IP address from, for further information, please see the # CGI:IRC documentation. # # # Get IP from PASS # # Get IP from WEBIRC # # Get IP from ident # # See the docs #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel create module: Adds snomask +j, which will notify opers of # any new channels that are created # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel filter module: Allows channel-op defined message # filtering using simple string matches (channel mode +g) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Chanprotect module: gives +q and +a channel modes # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGHOST module: Adds the /CHGHOST command # # #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# # Optional - If you want to use special chars for hostnames you can # # specify your own custom list of chars with the tag: # # # # charmap - A list of chars accepted as valid by the /CHGHOST # # and /SETHOST commands. Also note that the list is # # case-sensitive. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGIDENT module: Adds the /CHGIDENT command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support. # Relies on the module m_md5.so being loaded before m_cloaking.so in # the configuration file. # # #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify the m_cloaking.so module as above, you # # must define cloak keys, and optionally a cloak prefix as shown # # below. When using cloaking, the cloak keys are MANDITORY and must # # be included. However, if prefix is not included, it will default # # to your networks name from the tag. # # # # # # # # Please note that the key values will accept any number, and should # # be large numbers. Using small numbers such as "7" or "1924" will # # seriously weaken the security of your cloak. It is recommended you # # use hexdecimal numbers prefixed by "0x", as shown in this example, # # with each key eight hex digits long. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Clones module: Adds an oper command /CLONES for detecting cloned # users. Warning: This module may be resource intensive when its # command is issued, use with care. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Join: Allows you to force users to join one or more channels # automatically upon connecting to the server. # # #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # If you have m_conn_join.so loaded, you can configure it using the # follow values: # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Lusers: Shows the LUSERS output on connect # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Usermodes: Set modes on users when they connect # When this module is loaded tags may have an optional # modes="" value, which contains modes to add or remove from users # when they connect to the server. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Wait-for-Pong: Don't let a user connect until they PONG # # #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_conn_waitpong.so module loaded, configure it with # # the tag: # # # # sendsnotice - Whether to send a snotice on connect, like other # # older ircds # # # # killonbadreply - Whether to kill the user if they send the wrong # # PONG reply. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connection throttle module. Configuration: # # #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # seconds, maxconns - Amount of connections per . # # timeout - Time to wait after the throttle was activated # before deactivating it. Be aware that the time # is seconds + timeout. # # quitmsg - The message that users get if they attempt to # connect while the throttle is active. # # bootwait - Amount of time to wait before enforcing the # throttling when the server just booted. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DCCALLOW module: Adds the /DCCALLOW command # # #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # blockchat - Whether to block DCC CHAT as well as DCC SEND # length - Default duration of entries in DCCALLOW list # action - Default action to take if no action is specified # can be 'block' or 'allow' # # File configuration: # pattern - The glob pattern to match against # action - Action to take if a user attempts to send a file # that matches this pattern, can be 'block' or 'allow' # # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deaf module: adds support for ircu style usermode +d - deaf to # channel messages and channel notices. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deny Channels: Deny Channels from being used by users # # #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_denychans.so module loaded, you need to specify # # the channels to deny: # # # # name - The channel name to deny. # # # # allowopers - If operators are allowed to override the deny. # # # # reason - Reason given for the deny. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Devoice Module: Let users devoice themselves. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DNS Blacklist Module: Provides support for looking up IPs on one or # # more blacklists. # # # # # # For configuration options please see the wiki page for m_dnsbl at # # http://inspircd.org/wiki/DNS_Blacklist_Module # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Filter module: Provides glob-based message filtering # # OR # PCRE filter module: Filters messages using regular expressions # # # You may only use one or the other with these modules, network-wide. # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_filter or m_filter_pcre # # modules, then specfiy below the path to the filter.conf file, # # or define some tags. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Foobar module: does nothing - historical relic # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Globops module: gives /GLOBOPS and usermode +g # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Global load module: Allows loading and unloading of modules network- # wide (USE WITH EXTREME CAUTION!) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command # # #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_helpop.so module, then # # specify below the path to the helpop.conf file, or if you like to # # make a mess, define your helpop tags in this conf. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HIDECHANS module: Allows opers to hide their channels list from non- # opers by setting user mode +I on themselves. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HIDEOPER module: Allows opers to hide their oper status from non- # opers by setting user mode +H on themselves. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hostchange module: Allows a different style of cloaking # # #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Optional - If you choose to use the m_hostchange.so module. # # Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # # # # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # httpd module: Provides http server support for InspIRCd # # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # Optional - If you choose to use the m_httpd.so module, then you must # specify the port number and other details of your http server: # # # # You may have as many of these tags as you wish, each with a different # IP, port, host or index file. Each one will act as an independent # HTTP server. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http stats module: Provides basic stats pages over HTTP # Requires m_httpd.so to be loaded for it to function. # # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ident: Provides RFC 1413 ident lookup support # # #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you are using the m_ident.so module, then you can # # specify the timeout for ident lookups here. If not defined, it will # # default to one second. This is a non-blocking timeout which holds # # the user in a 'connecting' state until the lookup is complete. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invite except module: Adds support for channel invite exceptions (+I) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invisible module - Adds support for usermode +Q (quiet) which lets an # oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that # opers are still able to see invisible users, and if an oper with +Q # deopers, they will become visible. # # IMPORTANT NOTE: To allow this mode to be used by a type of oper, you # must first add the value canquiet="yes" to that oper's type tag. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Join flood module: Adds support for join flood protection (+j) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Jump Server module: Adds support for the RPL_REDIR numeric # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Knock module: adds the /KNOCK command and +K channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # # used to temporarily close/open for new connections to the server. # # These commands require OPER status and that the LOCKSERV UNLOCKSERV # # are specified in a tag that the oper is part of. This is so # # you can control who has access to this possible dangerous command. # # If your server is locked and you got disconnected, do a REHASH from # # shell to open up again. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Msg flood module: Adds message/notice flood protection (+f) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MySQL module: Allows other SQL modules to access MySQL databases # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h # # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mysql.so is more complex than described here, see the wiki for # # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # NAMESX module: Provides support for the NAMESX extension which allows # clients to see all the prefixes set on a user without getting confused. # This is supported by mIRC, x-chat, klient, and maybe more. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that # user from changing their nick again. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No ctcp module: Adds the channel mode +C to block CTCPs # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Noinvite module: Gives channel mode +V # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No nicks module: Adds the +N channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No Notice module: adds the channel mode +T # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper channels mode: Adds the +O channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper hash module: Allows hashed oper passwords # Relies on the module m_md5.so and/or m_sha256.so being loaded before # m_oper_hash.so in the configuration file. # # #-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # # To use this module, you must define a hash type for each oper's # password you want to hash. For example: # # # # The types of hashing available vary depending on which hashing modules # you load, but usually if you load m_sha256.so and m_md5.so, both md5 # and sha256 type hashing will be available (the most secure of which # is SHA256). #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper Join module: Forces opers to join a channel on oper-up # # #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_operjoin.so module, specify the channel here # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MOTD module: Provides support for seperate message of the day # on oper-up # # #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_opermotd.so module, specify the motd here # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override # # #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # m_override.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/Oper_Override_Module # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper levels module: Gives each oper a level and prevents # actions being taken against higher level opers # Specify the level as the 'level' parameter of the tag # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper modes module: Allows you to specify modes to add/remove on oper # Specify the modes as the 'modes' parameter of the tag # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # PostgreSQL module: Allows other SQL modules to access PgSQL databases # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h # # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_pgsql.so is more complex than described here, see the wiki for # # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random Quote module: provides a random quote on connect. # NOTE: Some of these may mimic fatal errors and confuse users and # opers alike! - BEWARE! # # #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_randquote.so module, then # # specify below the path to the randquotes.conf file. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Redirect module: Adds channel redirection (mode +L) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Registered users only channel creation # Allows only registered users and opers to create new channels. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict banned users module: # Disallows banned users on a channel from messaging the channel, # changing nick, or changing the topic, if loaded. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restricted channels module: Allows only opers to create channels # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Provide /LIST throttling (to prevent flooding) and /LIST safety to # prevent excess flood when the list is large. # # #-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # When using Safelist, you may set the following values; # # The first value, 'throttle', sets the amount of time in seconds a user # must wait between LIST commands. For example, if this is set to 60 # (the default) then the user may not /LIST more than once a minute. # If not defined, the default value is 60 seconds. # # The second value, 'maxlisters', indicates the maximum number of users # which may be retrieving a LIST at once. It is not recommended you raise # this value, as increasing it too high can make your network vulnerable # to floodbots which waste your bandwidth and CPU time with LIST requests. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAJOIN module: Adds the /SAJOIN command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAMODE module: Adds the oper /SAMODE command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SANICK module: Allows opers to change user's nicks # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAPART module: Adds the oper /SAPART command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Secure list module: Prevent /LIST in the first minute of connection, # crippling most spambots and trojan spreader bots. # # #-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Securelist can be harmful to some irc search engines such as # # netsplit.de and searchirc.com. To prevent securelist blocking these # # sites from listing, define exception tags as shown below: # # # # Define the following variable to change how long a user must wait # # before issuing a LIST. If not defined, defaults to 60 seconds. # # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # See nicks module: Allow for SNOMASK +N which shows nick changes. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Set Idle module: Adds a command for opers to change their # idle time (mainly a toy) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via user mode +r, which # is similar to the DALnet and dreamforge systems. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via account names (AC) # and is similar in operation to the way asuka and ircu handle services. # it cannot be used at the same time as m_services, above. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Sethost module: Adds the /SETHOST command # See m_chghost for how to customise valid chars for hostnames # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Setident module: Adds the /SETIDENT command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SETNAME module: Adds the /SETNAME command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Show Whois module: Adds the +W usermode which allows opers # to see when they are whois'ed (can be annoying). # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spy module: Adds the commands SPYLIST and SPYNAMES that let opers # see who is in a +s channel, and list +s channels, show keys of keyed # channels the oper is not a member of etc. (standard 'abusive' features # of many other ircds, modulized here in InspIRCd). # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL channel mode module: Adds support for SSL-only channels (+z). # does not do anything useful without a working SSL module (see below) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Dummy ssl module: If you have other servers on your network which # have SSL, but your server does not have ssl enabled, you should load # this module, which will handle SSL metadata (e.g. the "Is using ssl" # field in the WHOIS information). # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, # if enabled. You must copy the source for this module from the directory # src/modules/extra, or answer 'yes' in ./configure when asked if you # want to enable this, or it will not load. # # #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_gnutls.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/GnuTLS_SSL_Module # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL Info module: Allows users to retrieve information about other # user's peer SSL certificates and keys. This can be used by client # scripts to validate users. For this to work, one of m_ssl_gnutls.so # or m_ssl_openssl.so must be loaded. You must symlink the source for # this module from the directory src/modules/extra. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL, # if enabled. You must copy the source for this module from the directory # src/modules/extra, or answer 'yes' in ./configure when asked if you # want to enable this, or it will not load. # # #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_openssl.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/OpenSSL_SSL_Module # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL Cert Oper module: Allows opers to oper up using the key fingerprint # stored within their SSL certificate and key pair. # When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must # be loaded. An extra value should be added to enabled opers, which # is in the following format: fingerprint="". For more information, # see the example in the oper blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Strip colour module: Adds the channel mode +S # # # Optionally, you can allow channel ops to bypass filtering. Defaults to no. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SILENCE module: Adds support for /SILENCE # # # Configuration tags: # # # # Sets the maximum number of entries on a users silence list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Extended SILENCE module: Adds support for /SILENCE with additional # features to silence based on invites, channel messages, etc. # # # The configuration tags for this module are identical to those of # m_silence, shown above. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQLite3 module: Allows other SQL modules to access SQLite3 # # databases through a unified API. You must link the source for this # # module from the directory src/modules/extra to src/modules, plus # # the file m_sqlv2.h # # # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlite.so is more complex than described here, see the wiki for # # more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQLutils module: Provides some utilities to SQL client modules, such # as mapping queries to users and channels. You must copy the source # for this module from the directory src/modules/extra/m_sqlutils.cpp # and src/modules/extra/m_sqlutils.h into /src/modules # Needed for, and loaded before: SQLauth and SQLoper # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL authentication module: Allows IRCd connections to be tied into # a database table (for example a forum). You must copy the source for # this module from the directory src/modules/extra # Depends on the SQLutils module being loaded first. # # #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlauth.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/SQL_Authentication_Module # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL logging module: Allows you to log network-wide data for your # network in a fully normalized set of SQL tables. You must copy the # source for this module from the directory src/modules/extra # # #-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see m_sql) # # # # See also: http://www.inspircd.org/wiki/SQL_Logging_Module # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL oper module: Allows you to store oper credentials in an SQL table # You must copy the source for this module from the directory src/modules/extra # Depends on the SQLutils module being loaded first. # # #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see m_sql) # # # # See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # # added/removed by Services. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SWHOIS module: Allows you to add arbitary lines to user WHOIS. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test command module: Does nothing significant. Read: pointless. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Timed bans module: Adds timed bans and the /TBAN command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test line module: Adds the /TLINE command, used to test how many # users a /GLINE or /ZLINE etc would match. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # UHNAMES support module: Adds support for the IRCX style UHNAMES # extension, which displays ident and hostname in the names list for # each user, saving clients from doing a WHO on the channel. Note that # this module is not widely supported yet. If a client does not support # UHNAMES it will not enable it, this will not break incompatible # clients. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Uninvite module: Adds the /UNINVITE command which lets users remove # pending invites from channels without waiting for the user to join. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Userip module: Adds the /USERIP command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Vhost module: Adds the VHOST command which allows for adding virtual # hosts which are accessible using a username and password in the config. # # #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # user - Username for the vhost. # # # # pass - Password for the vhost. # # # # host - Vhost to set. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Watch module: Adds the WATCH command, which is used by clients to # maintain notify lists. # # # Configuration tags: # # # # Sets the maximum number of entries on a user's watch list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # XMLSocket module: Adds support for connections using the shockwave # flash XMLSocket. Note that this does not work if the client you are # using has retarded ideas of the IRC protocol. Your client must still # send RFC-correct lines to the server, this module only changes the # line ending from newlines to null terminators. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # ZipLinks module: Adds support for zlib deflate on server to server # connections. Both ends of the connection must load this module. # # # # To use this module, you must enable it as a transport type in your # tags or tags using the transport name 'zip'. # See the documentation of and , respectively. # #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # The ban tags define nick masks, host masks and ip ranges which are # # banned from your server. All details in these tags are local to # # Your server. # # # # # # badip lines ban an ip range (same as a zline) # # # # ipmask - The ip range to ban (wildcards possible) # # CIDR is supported in the IP mask. # # reason - Reason to display when disconnected # # # # badnick lines ban a nick mask (same as a qline) # # # # nick - Nick mask to ban (wildcards possible) # # reason - Reason to display on /NICK # # # # badhost lines ban a user@host mask (same as a kline) # # # # host - ident@hostname (wildcards possible) # # If you specify an IP, CIDR is supported. # # reason - Reason to display on disconnection # # # # exception lines define a hostmask that is excempt from [kzg]lines # # # # host - ident@hostname (wildcards possible) # # If you specify an IP, CIDR is supported. # # reason - Reason, shown only in /stats e # # # #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional tag allows you to specify how wide a gline, eline, # # kline, zline or qline can be before it is forbidden from being # # set. By setting hostmasks="yes", you can allow all G, K, E lines, # # no matter how many users the ban would cover. This is not # # recommended! By setting ipmasks="yes", you can allow all Z lines, # # no matter how many users these cover too. Needless to say we # # don't recommend you do this, or, set nickmasks="yes", which will # # allow any qline. # # # # The trigger value indicates how wide any mask will be before it is # # prevented from being set. The default value is 95.5% if this tag is # # not defined in your configuration file, meaning that if your # # network has 1000 users, a gline matching over 955 of them will be # # prevented from being added. # # # # Please note that remote servers (and services) are exempt from # # these restrictions and expected to enforce their own policies # # locally! # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # You should already know what to do here :) # ######################################################################### # # # - InspIRCd Development Team - # # http://www.inspircd.org # # # #########################################################################