#-#-#-#-#-#-#-#-#-#-#-#-#-  MODULE OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#  These tags define which modules will be loaded on startup by your  #
#  server. Add modules without any paths. When you make your ircd     #
#  using the 'make' command, all compiled modules will be moved into  #
#  the folder you specified when you ran ./configure. The module tag  #
#  automatically looks for modules in this location.                  #
#  If you attempt to load a module outside of this location, either   #
#  in the config, or via /LOADMODULE, you will receive an error.      #
#                                                                     #
#  By default, ALL modules are commented out. You must uncomment them #
#  or add lines to your config to load modules. Please refer to       #
#  https://wiki.inspircd.org/3.0/Modules for a list of modules and    #
#  each modules link for any additional conf tags they require.       #
#                                                                     #
#    ____                _   _____ _     _       ____  _ _   _        #
#   |  _ \ ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
#   | |_) / _ \/ _` |/ _` |   | | | '_ \| / __| |  _ \| | __| |       #
#   |  _ <  __/ (_| | (_| |   | | | | | | \__ \ | |_) | | |_|_|       #
#   |_| \_\___|\__,_|\__,_|   |_| |_| |_|_|___/ |____/|_|\__(_)       #
#                                                                     #
# To link servers to InspIRCd, you MUST load the spanningtree module. #
# If you don't do this, server links will NOT work at all.            #
# This is by design, to allow for the implementation of other linking #
# protocols in modules in the future. This module is at the bottom of #
# this file.                                                          #
#                                                                     #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MD5 module: Allows other modules to generate MD5 hashes, usually for
# cryptographic uses and security.
#
# IMPORTANT:
# Other modules such as cloaking and password_hash may rely on
# this module being loaded to function.
#
#<module name="md5">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA256 module: Allows other modules to generate SHA256 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
# Other modules such as password_hash may rely on this module being
# loaded to function. Certain modules such as spanningtree will
# function without this module but when it is loaded their features will
# be enhanced (for example the addition of HMAC authentication).
#
#<module name="sha256">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
# Other modules may rely on this module being loaded to function.
#<module name="ripemd160">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Abbreviation module: Provides the ability to abbreviate commands a-la
# BBC BASIC keywords.
#<module name="abbreviation">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases.
#<module name="alias">
#
# Set the 'prefix' for in-channel aliases (fantasy commands) to the
# specified character. If not set, the default is "!".
# If 'allowbots' is disabled, +B clients will not be able to use
# fantasy commands. If not set, the default is no.
#<fantasy prefix="!" allowbots="no">
#
#-#-#-#-#-#-#-#-#-#-#-  ALIAS DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you have the alias module loaded, you may also define aliases as #
# shown below. They are commonly used to provide shortcut commands to #
# services, however they are not limited to just this use.            #
# An alias tag requires the following values to be defined in it:     #
#                                                                     #
# text        -      The text to detect as the actual command line.   #
#                    Can't contain spaces, but case insensitive.      #
#                    You may have multiple aliases with the same      #
#                    command name (text="" value), however the first  #
#                    found will be executed if its format value is    #
#                    matched, or it has no format value. Aliases are  #
#                    read from the top of the file to the bottom.     #
#                                                                     #
# usercommand -      If this is true, the alias can be run simply as  #
#                    /aliasname. Defaults to true.                    #
#                                                                     #
# channelcommand -   If this is true, the alias can be used as an     #
#                    in-channel alias or 'fantasy command', prefixed  #
#                    by the fantasy prefix character, !aliasname by   #
#                    default. Defaults to false.                      #
#                                                                     #
# format      -      If this is defined, the parameters of the alias  #
#                    must match this glob pattern. For example if you #
#                    want the first parameter to start with a # for   #
#                    the alias to be executed, set format="#*" in the #
#                    alias definition. Note that the :'s which are    #
#                    part of IRC formatted lines will be preserved    #
#                    for matching of this text. This value is         #
#                    optional.                                        #
#                                                                     #
# replace     -      The text to replace 'text' with. Usually this    #
#                    will be "PRIVMSG ServiceName :$2-" or similar.   #
#                    You may use the variables $1 through $9 in the   #
#                    replace string, which refer to the first through #
#                    ninth word in the original string typed by the   #
#                    user. You may also use $1- through $9- which     #
#                    refer to the first word onwards, through to the  #
#                    ninth word onwards, e.g. if the user types the   #
#                    command "foo bar baz qux quz" then $3- will hold #
#                    "baz qux quz" and $2 will contain "bar". You may #
#                    also use the special variables: $nick, $ident,   #
#                    $host and $vhost, and you may separate multiple  #
#                    commands with a newline (which can be written in #
#                    the file literally, or encoded as &nl; or \n     #
#                    depending on the config format setting).         #
#                                                                     #
# requires    -      If you provide a value for 'requires' this means #
#                    the given nickname MUST be online for the alias  #
#                    to successfully trigger. If they are not, then   #
#                    the user receives a 'no such nick' 401 numeric.  #
#                                                                     #
# uline       -      Setting this to true will ensure that the user   #
#                    given in 'requires' is also on a u-lined server, #
#                    as well as actually being on the network. If the #
#                    user is online, but not on a u-lined server,     #
#                    then an oper alert is sent out as this is        #
#                    possibly a sign of a user trying to impersonate  #
#                    a service.                                       #
#                                                                     #
# operonly    -      If true, this will make the alias oper only.     #
#                    If a non-oper attempts to use the alias, it will #
#                    appear to not exist.                             #
#                                                                     #
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
#  requires="ChanServ" uline="yes">
#
#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
#  requires="NickServ" uline="yes">
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
# be placed ABOVE the default NICKSERV alias.
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
#  requires="NickServ" uline="yes">
#
# You may also add aliases to trigger based on something said in a
# channel, aka 'fantasy' commands, configured in the same manner as any
# other alias, with usercommand="no" and channelcommand="yes" The
# command must be preceded by the fantasy prefix when used.
#
#<alias text="CS" usercommand="no" channelcommand="yes"
#  replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
#
# This would be used as "!cs <command> <options>", with the channel
# being automatically inserted after the command in the message to
# ChanServ, assuming the fantasy prefix is "!".

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Allowinvite module: Gives channel mode +A to allow all users to use
# /INVITE, and extban A to deny invite from specific masks.
#<module name="allowinvite">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alltime module: Shows time on all connected servers at once.
# This module is oper-only and provides /ALLTIME.
# To use, ALLTIME must be in one of your oper class blocks.
#<module name="alltime">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
#<module name="auditorium">
#
# Auditorium settings:
#
#<auditorium opvisible="no" opcansee="no" opercansee="yes">
#
# opvisible (auditorium-vis in exemptchanops):
#   Show channel ops to all users
# opcansee (auditorium-see in exemptchanops):
#   Allow ops to see all joins/parts/kicks in the channel
# opercansee:
#   Allow opers (channels/auspex) to see see all joins/parts/kicks in the channel
#
# Exemptchanops can be used to adjust the level at which users become visible or
# the level at which they can see the full member list of the channel.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Autoop module: Adds basic channel access controls via the +w listmode.
# For example +w o:*!Attila@127.0.0.1 will op anyone matching that mask
# on join. This can be combined with extbans, for example +w o:R:Brain
# will op anyone identified to the account "Brain".
# Another useful combination is with SSL client certificate
# fingerprints: +w h:z:72db600734bb9546c1bdd02377bc21d2a9690d48 will
# give halfop to the user(s) having the given certificate.
#<module name="autoop">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e).
#<module name="banexception">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban redirection module: Allows bans which redirect to a specified
# channel. e.g. +b nick!ident@host#channelbanneduserissentto
#<module name="banredirect">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# bcrypt module: Allows other modules to generate bcrypt hashes,
# usually for cryptographic uses and security.
#<module name="bcrypt">
#
# rounds: Defines how many rounds the bcrypt function will run when
# generating new hashes.
#<bcrypt rounds="10">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame.
#<module name="blockamsg">
#
#-#-#-#-#-#-#-#-#-#-#-  BLOCKAMSG CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you have the blockamsg module loaded, you can configure it with  #
# the <blockamsg> tag:                                                #
#                                                                     #
# delay          -   How much time between two messages to force them #
#                    to be recognised as unrelated.                   #
# action         -   Any of 'notice', 'noticeopers', 'silent', 'kill' #
#                    or 'killopers'. Define how to take action when   #
#                    a user uses /amsg or /ame.                       #
#
#<blockamsg delay="3" action="killopers">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages.
#<module name="blockcaps">
#
#-#-#-#-#-#-#-#-#-#-#-  BLOCKCAPS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# percent        - What percentage of the text must be caps before    #
#                  text will be blocked.                              #
#                                                                     #
# minlen         - The minimum length a line must be for the block    #
#                  percent to have any effect.                        #
#                                                                     #
# capsmap        - A list of chars to be considered CAPS. Can be used #
#                  to add CAPS characters for your language. Also you #
#                  can add things like ! and space to further lock    #
#                  down on caps usage.                                #
#<blockcaps percent="50"
#           minlen="5"
#           capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block color module: Blocking color-coded messages with chan mode +c.
#<module name="blockcolor">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B. If set on a user, it will
# show that the user is a bot in /WHOIS.
#<module name="botmode">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CallerID module: Adds usermode +g which activates hybrid-style
# callerid: block all private messages unless you /ACCEPT first.
#<module name="callerid">
#
#-#-#-#-#-#-#-#-#-#-#- CALLERID  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# maxaccepts     - Maximum number of entries a user can add to his    #
#                  /ACCEPT list. Default is 16 entries.               #
# operoverride   - Can opers (note: ALL opers) override callerid?     #
#                  Default is no.                                     #
# tracknick      - Preserve /accept entries when a user changes nick? #
#                  If no (the default), the user is removed from      #
#                  everyone's accept list if he changes nickname.     #
# cooldown       - Amount of time that must pass since the last       #
#                  notification sent to a user before he can be sent  #
#                  another. Default is 1 minute.                      #
#<callerid maxaccepts="16"
#          operoverride="no"
#          tracknick="no"
#          cooldown="1m">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism required by the
# sasl, namesx, uhnames, and ircv3 modules.
# It is also recommended for STARTTLS support in the starttls module.
#<module name="cap">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
# This module is oper-only and provides /CBAN.
# To use, CBAN must be in one of your oper class blocks.
#<module name="cban">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds channel and user mode +G.
#<module name="censor">
#
#-#-#-#-#-#-#-#-#-#-#-  CENSOR  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Optional - If you specify to use the censor module, then you must   #
# specify some censor tags. See also:                                 #
# https://wiki.inspircd.org/Modules/3.0/censor                        #
#
#<include file="examples/censor.conf.example">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Enables forwarding the real IP address of a user from
# a gateway to the IRC server.
#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
# If you use the cgiirc module then you must specify the gateways which
# are authorised to forward IP/host information to your server. There
# are currently two ways to do this:
#
# The webirc method is the recommended way to allow gateways to forward
# IP/host information. When using this method the gateway sends a WEBIRC
# message to the server on connection. For more details please read the
# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
#
# When using this method you must specify a wildcard mask or CIDR range
# to allow gateway connections from and at least one of either a SSL
# client certificate fingerprint for the gateway or a password to be
# sent in the WEBIRC command.
#
# <cgihost type="webirc"
#          fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
#          mask="192.0.2.0/24">
# <cgihost type="webirc"
#          password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
#          hash="bcrypt"
#          mask="*.webirc.gateway.example.com">
#
# Alternatively if your gateway does not support sending the WEBIRC
# message then you can configure InspIRCd to look for the client IP
# address in the ident sent by the user. This is not recommended as it
# only works with IPv4 connections.
#
# When using this method you must specify a wildcard mask or CIDR range to
# allow gateway connections from.
#
# <cgihost type="ident" mask="198.51.100.0/24">
# <cgihost type="ident" mask="*.ident.gateway.example.com">
#
# By default gateway connections are logged to the +w snomask. If you
# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">

# IMPORTANT NOTE:
# ---------------
#
# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
# class which matches the gateway site's host is checked. Therefore you
# must raise the maximum local/global clients for this IP as high as you
# want to allow gateway clients. After the client has connected and is
# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel create module: Adds snomask +j, which will notify opers of
# any new channels that are created.
# This module is oper-only.
#<module name="chancreate">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message filtering
# using simple string matches (channel mode +g).
#<module name="chanfilter">
#
# If hidemask is set to yes, the user will not be shown the mask when
# his/her message is blocked.
#<chanfilter hidemask="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel history module: Displays the last 'X' lines of chat to a user
# joining a channel with +H 'X:T' set; 'T' is the maximum time to keep
# lines in the history buffer. Designed so that the new user knows what
# the current topic of conversation is when joining the channel.
#<module name="chanhistory">
#
# Set the maximum number of lines allowed to be stored per channel below.
# This is the hard limit for 'X'.
# If notice is set to yes, joining users will get a NOTICE before playback
# telling them about the following lines being the pre-join history.
# If bots is set to yes, it will also send to users marked with +B
#<chanhistory maxlines="20" notice="yes" bots="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: Used to send snotice output to channels, to
# allow staff to centrally monitor and discuss network activity.
#
# The "channel" field is where you want the messages to go, "snomasks"
# is what snomasks you want to be sent to that channel. Multiple tags
# are allowed.
#<module name="chanlog">
#<chanlog snomasks="AOcC" channel="#opers">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel names module: Allows disabling channels which have certain
# characters in the channel name such as bold, colorcodes, etc. which
# can be quite annoying and allow users to on occasion have a channel
# that looks like the name of another channel on the network.
#<module name="channames">

<channames
	# denyrange: characters or range of characters to deny in channel
	# names.
	denyrange="2,3"

	# allowrange: characters or range of characters to specifically allow
	# in channel names.
	allowrange="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone already
# in a channel matching a ban like +b j:#channel*mask from joining.
# Note that by default wildcard characters * and ? are allowed in
# channel names. To disallow them, load m_channames and add characters
# 42 and 63 to denyrange (see above).
#<module name="channelban">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Check module: Adds the /CHECK command.
# Check is useful for looking up information on channels, users,
# IP addresses and hosts.
# This module is oper-only.
# To use, CHECK must be in one of your oper class blocks.
#<module name="check">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command.
# This module is oper-only.
# To use, CHGHOST must be in one of your oper class blocks.
# NOTE: Services will not be able to set vhosts on users if this module
# isn't loaded. If you're planning on running services, you probably
# want to load this.
#<module name="chghost">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST  CONFIGURATION #-#-#-#-#-#-#-#-#
# Optional - If you want to use special chars for hostnames you can  #
# specify your own custom list of chars with the <hostname> tag:     #
#                                                                    #
# charmap        - A list of chars accepted as valid by the /CHGHOST #
#                  and /SETHOST commands. Also note that the list is #
#                  case-sensitive.                                   #
#<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGIDENT module: Adds the /CHGIDENT command.
# This module is oper-only.
# To use, CHGIDENT must be in one of your oper class blocks.
#<module name="chgident">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGNAME module: Adds the /CHGNAME command.
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
#<module name="chgname">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection class ban module: Adds support for extban 'n' which 
# matches against the class name of the user's connection.
# This module assumes that connection classes are named in a uniform
# way on all servers of the network.
#<module name="classban">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
# all users on a channel using /CLEARCHAN.
#<module name="clearchan">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
# Relies on the md5 module being loaded.
# To cloak users when they connect, load the conn_umodes module and set
# <connect:modes> to include the +x mode. The example <connect> tag
# shows this. See the conn_umodes module for more information.
#<module name="cloaking">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# To use cloaking, you must define a cloak key, and optionally a      #
# cloak prefix as shown below. The cloak key must be shared across    #
# the network for correct cloaking.                                   #
#                                                                     #
# There are two methods of cloaking:                                  #
#                                                                     #
#   half           Cloak only the "unique" portion of a host; by      #
#                  default show the last 2 parts of the domain,       #
#                  /16 subnet of IPv4 or /48 subnet of the IPv6       #
#                  address.                                           #
#                  To change the number of shown parts, modify the    #
#                  domainparts option.                                #
#                                                                     #
#   full           Cloak the users completely, using three slices for #
#                  common CIDR bans (IPv4: /16, /24; IPv6: /48, /64). #
#                                                                     #
# The methods use a single key that can be any length of text.        #
# An optional prefix may be specified to mark cloaked hosts.          #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<cloak mode="half"
#       key="secret"
#       domainparts="3"
#       prefix="net-">

#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Close module: Allows an oper to close all unregistered connections.
# This module is oper-only and provides the /CLOSE command.
# To use, CLOSE must be in one of your oper class blocks.
#<module name="close">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# users. Warning: This command may be resource intensive when it is
# issued, use with care.
# This module is oper-only.
# To use, CLONES must be in one of your oper class blocks.
#<module name="clones">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Common channels module: Adds user mode +c, which, when set, requires
# that users must share a common channel with you to PRIVMSG or NOTICE
# you.
#<module name="commonchans">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auto join on connect module: Allows you to force users to join one
# or more channels automatically upon connecting to the server, or
# join them in case they aren't on any channels after being online
# for X seconds.
#<module name="conn_join">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#
# If you have the conn_join module loaded, you can configure it below
# or set autojoin="#chat,#help" in <connect> blocks.
#
# Join users immediately after connection to #one #two and #three.
#<autojoin channel="#one,#two,#three">
# Join users to #chat after 15 seconds if they aren't on any channels.
#<autojoin channel="#chat" delay="15">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set modes on connect module: When this module is loaded <connect>
# blocks may have an optional modes="" value, which contains modes to
# add or remove from users when they connect to the server.
#<module name="conn_umodes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Wait for PONG on connect module: Send a PING to all connecting users
# and don't let them connect until they reply with a PONG.
# This is useful to stop certain kinds of bots and proxies.
#<module name="conn_waitpong">
#
#-#-#-#-#-#-#-#-#-#-#-   WAITPONG CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you have the conn_waitpong module loaded, configure it with the  #
# <waitpong> tag:                                                     #
#                                                                     #
# sendsnotice    -   Whether to send a helpful notice to users on     #
#                    connect telling them how to connect, should      #
#                    their client not reply PONG automatically.       #
#                                                                     #
# killonbadreply -   Whether to kill the user if they send the wrong  #
#                    PONG reply.                                      #
#                                                                     #
#<waitpong sendsnotice="yes" killonbadreply="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel cycle module: Adds the /CYCLE command which is a server-side
# /HOP that bypasses restrictive modes.
#<module name="cycle">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connectban: Provides IP connection throttling. Any IP range that
# connects too many times (configurable) in an hour is Z-Lined for a
# (configurable) duration, and their count resets to 0.
#<module name="connectban">
#
# ipv4cidr and ipv6cidr allow you to turn the comparison from
# individual IP addresses (32 and 128 bits) into CIDR masks, to allow
# for throttling over whole ISPs/blocks of IPs, which may be needed to
# prevent attacks.
#
# This allows for 10 connections in an hour with a 10 minute ban if
# that is exceeded.
#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128"
# A custom ban message may optionally be specified.
# banmessage="Your IP range has been attempting to connect too many times in too short a duration. Wait a while, and you will be able to connect.">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module.
#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
#  period, maxconns -  Amount of connections per <period>.
#
#  timeout           -  Time to wait after the throttle was activated
#                       before deactivating it. Be aware that the time
#                       is seconds + timeout.
#
#  quitmsg           -  The message that users get if they attempt to
#                       connect while the throttle is active.
#
#  bootwait          -  Amount of time in seconds to wait before enforcing
#                       the throttling when the server just booted.
#
#<connflood seconds="30" maxconns="3" timeout="30"
#   quitmsg="Throttled" bootwait="10">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom prefixes: Allows for channel prefixes to be configured.
#<module name="customprefix">
#
# name       The name of the mode, must be unique from other modes.
# letter     The letter used for this mode. Required.
# prefix     The prefix used for nicks with this mode. Not required.
# rank       A numeric rank for this prefix, defining what permissions it gives.
#            The rank of voice, halfop and op is 10000, 20000, and 30000,
#            respectively.
# ranktoset  The numeric rank required to set this mode. Defaults to rank.
# ranktounset The numeric rank required to unset this mode. Defaults to ranktoset.
# depriv     Can you remove the mode from yourself? Defaults to yes.
#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
#<customprefix name="admin" letter="a" prefix="&amp;" rank="40000" ranktoset="50000">
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
#
# You can also override the configuration of prefix modes added by both the core
# and other modules by adding a customprefix tag with change="yes" specified.
# <customprefix name="op" change="yes" rank="30000" ranktoset="30000">
# <customprefix name="voice" change="yes" rank="10000" ranktoset="10000" depriv="no">
#
# Do /RELOADMODULE customprefix after changing the settings of this module.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom title module: Adds the /TITLE command which allows for trusted
# users to gain a custom whois line and an optional vhost can be
# specified.
#<module name="customtitle">
#
#-#-#-#-#-#-#-#-#-#-  CUSTOM TITLE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#
#  name     - The username used to identify.
#  password - The password used to identify.
#  hash     - The hash for the specific user's password (optional).
#             password_hash and a hashing module must be loaded
#             for this to work.
#  host     - Allowed hostmask (optional).
#  title    - Title shown in whois.
#  vhost    - Displayed host (optional).
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@test.org" title="Official Chat Helper" vhost="helper.test.org">
#<title name="foo" password="$2a$10$UYZ4OcO8NNTCCGyCdY9SK.2GHiqGgxZfHFPOPmWuxEVWVQTtoDC7C" hash="bcrypt" title="Official Chat Helper">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
#<module name="dccallow">
#
#-#-#-#-#-#-#-#-#-#-#-  DCCALLOW CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
#  blockchat         - Whether to block DCC CHAT as well as DCC SEND.
#  length            - Default duration of entries in DCCALLOW list.
#  action            - Default action to take if no action is
#                      specified, can be 'block' or 'allow'.
#  maxentries        - Max number of nicks to allow on a DCCALLOW list.
#
# File configuration:
#  pattern           - The glob pattern to match against.
#  action            - Action to take if a user attempts to send a file
#                      that matches this pattern, can be 'block' or
#                      'allow'.
#
#<dccallow blockchat="yes" length="5m" action="block" maxentries="20">
#<banfile pattern="*.exe" action="block">
#<banfile pattern="*.txt" action="allow">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deaf module: Adds support for the usermode +d - deaf to channel
# messages and channel notices.
#<module name="deaf">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay join module: Adds the channel mode +D which delays all JOIN
# messages from users until they speak. If they quit or part before
# speaking, their quit or part message will not be shown to the channel
# which helps cut down noise on large channels in a more friendly way
# than the auditorium mode. Only channel ops may set the +D mode.
#<module name="delayjoin">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay message module: Adds the channel mode +d which disallows a user
# from talking in the channel unless they've been joined for X seconds.
# Settable using /MODE #chan +d 30
#<module name="delaymsg">
# Set allownotice to no to disallow NOTICEs too. Defaults to yes.
#<delaymsg allownotice="no">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny channels module: Deny channels from being used by users.
#<module name="denychans">
#
#-#-#-#-#-#-#-#-#-#-#-   DENYCHAN DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you have the denychans module loaded, you need to specify the    #
# channels to deny:                                                   #
#                                                                     #
# name        -      The channel name to deny (glob masks are ok).    #
# allowopers  -      If operators are allowed to override the deny.   #
# reason      -      Reason given for the deny.                       #
# redirect    -      Redirect the user to a different channel.        #
#                                                                     #
#<badchan name="#gods*" allowopers="yes" reason="Tortoises!">         #
#<badchan name="#chan1" redirect="#chan2" reason="Chan1 is closed">   #
#                                                                     #
# Redirects will not work if the target channel is set +L.            #
#                                                                     #
# Additionally, you may specify channels which are allowed, even if   #
# a badchan tag specifies it would be denied:                         #
#<goodchan name="#funtimes">                                          #
# Glob masks are accepted here also.                                  #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists.                                                    #
#<module name="dnsbl">                                                #
#                                                                     #
# For configuration options please see the wiki page for dnsbl at     #
# https://wiki.inspircd.org/Modules/3.0/dnsbl                         #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Exempt channel operators module: Provides support for allowing      #
# channel operators to be exempt from some channel modes.  Supported  #
# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor,  #
# filter, regmoderated, nonick, nonotice, and stripcolor.             #
#<module name="exemptchanops">                                        #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER.   #
#<module name="filter">
#                                                                     #
# This module depends upon a regex provider such as regex_pcre or     #
# regex_glob to function. You must specify which of these you want    #
# the filter module to use via the tag below.                         #
#                                                                     #
# Valid engines are:                                                  #
#                                                                     #
# glob   - Glob patterns, provided via regex_glob.                    #
# pcre   - PCRE regexps, provided via regex_pcre, needs libpcre.      #
# tre    - TRE regexps, provided via regex_tre, requires libtre.      #
# posix  - POSIX regexps, provided via regex_posix, not available     #
#          on Windows, no dependencies on other operating systems.    #
# stdlib - stdlib regexps, provided via regex_stdlib, see comment     #
#          at the <module> tag for info on availability.              #
#                                                                     #
#<filteropts engine="glob">                                           #
#                                                                     #
# Your choice of regex engine must match on all servers network-wide.
#
# To learn more about the configuration of this module, read          #
# examples/filter.conf.example, which covers the various types of     #
# filters and shows how to add exemptions.                            #
#
#-#-#-#-#-#-#-#-#-#-#-  FILTER  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Optional - If you specify to use the filter module, then            #
# specify below the path to the filter.conf file, or define some      #
# <filter> tags.                                                      #
#                                                                     #
#<include file="examples/filter.conf.example">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flash Policy Daemon module: Allows Flash IRC clients (e.g. LightIRC)#
# to connect. If no file is specified, it'll serve a default policy   #
# allowing all IPs to connect to all plaintext IRC ports              #
#<bind address="" port="8430" type="flashpolicyd">                    #
#<flashpolicyd timeout="5" file="">                                   #
#<module name="flashpolicyd">                                         #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Gecos ban: Implements extended ban 'r', which stops anyone matching
# a mask like +b r:*realname?here* from joining a channel.
#<module name="gecosban">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GeoIP module: Allows the server admin to match users by country code.
# This module is in extras. Re-run configure with:
# ./configure --enable-extras=m_geoip.cpp
# and run make install, then uncomment this module to enable it.
# This module requires GeoIP to be installed on your system,
# use your package manager to find the appropriate packages
# or check the InspIRCd wiki page for this module.
#<module name="geoip">
#
# The actual allow/ban actions are done by connect classes, not by the
# GeoIP module. An example connect class to ban people from russia or
# turkey:
#
# <connect deny="*" geoip="TR,RU">
#
# The country code must be in capitals and should be an ISO country
# code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc)
# will be assigned the country code "UNK". Since connect classes are
# matched from top down, your deny classes must be above your allow
# classes for them to match.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: Provides the /GLOBOPS command and snomask +g.
# This module is oper-only.
# To use, GLOBOPS must be in one of your oper class blocks.
#<module name="globops">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# wide (USE WITH EXTREME CAUTION!)
# This module is oper-only and provides /GLOADMODULE, /GUNLOADMODULE
# and /GRELOADMODULE.
# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
# must be in one of your oper class blocks.
#<module name="globalload">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="helpop">
#
#-#-#-#-#-#-#-#-#-#-#-#-  HELPOP  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you specify to use the helpop module, then specify below the     #
# path to the helpop.conf file.                                       #
#                                                                     #
#<include file="examples/inspircd.helpop-full.example">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide chans module: Allows users to hide their channels list from non-
# opers by setting user mode +I on themselves.
#<module name="hidechans">
#
# This mode can optionally prevent opers from seeing channels on a +I
# user, for more privacy if set to true.
# This setting is not recommended for most mainstream networks.
#<hidechans affectsopers="false">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide list module: Allows for hiding the list of listmodes from users
# who do not have sufficient channel rank.
#<module name="hidelist">
#
# Each <hidelist> tag configures one listmode to hide.
# mode: Name of the listmode to hide.
# rank: Minimum rank required to view the list. If set to 0, all
# members of the channel may view the list, but non-members may not.
# The rank of the built-in op and voice mode is 30000 and 10000,
# respectively; the rank of other prefix modes is configurable.
# Defaults to 20000.
#
# Hiding the ban list is not recommended because it may break some
# clients.
#
# Hide filter (+g) list:
#<hidelist mode="filter" rank="30000">
# Only show invite exceptions (+I) to channel members:
#<hidelist mode="invex" rank="0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide oper module: Allows opers to hide their oper status from non-
# opers by setting user mode +H on themselves.
# This module is oper-only.
#<module name="hideoper">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking.
#<module name="hostchange">
#
#-#-#-#-#-#-#-#-#-#-#-  HOSTCHANGE  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
#                                                                     #
# See https://wiki.inspircd.org/Modules/3.0/hostchange for help.      #
#                                                                     #
#<host suffix="invalid.org" separator="." prefix="">
#<hostchange mask="*@42.theanswer.example.org" action="addnick">
#<hostchange mask="*root@*" action="suffix">
#<hostchange mask="a@example.com" action="set" value="foo.bar.baz">
#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">

# hostcycle: If loaded, when a user gets a host or ident set, it will
# cycle them in all their channels. If not loaded it will simply change
# their host/ident without cycling them.
# This module is compatible with the ircv3_chghost module. Clients
# supporting the chghost extension will get the chghost message instead
# of seeing a host cycle.
#<module name="hostcycle">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides HTTP server support for InspIRCd.
#<module name="httpd">
#
#-#-#-#-#-#-#-#-#-#-#-#-  HTTPD   CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#
# If you choose to use the httpd module, then you will need to add
# a <bind> tag with type "httpd", and load at least one of the other
# httpd_* modules to provide pages to display.
#
# You can adjust the timeout for HTTP connections below. All HTTP
# connections will be closed after (roughly) this time period.
#<httpd timeout="20">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP ACL module: Provides access control lists for httpd dependent
# modules. Use this module to restrict pages by IP address and by
# password.
#<module name="httpd_acl">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# Restrict access to the httpd_stats module to all but the local
# network and when the correct password is specified:
# <httpdacl path="/stats*" types="password,whitelist"
#    username="secrets" password="mypasshere" whitelist="127.0.0.*,10.*">
#
# Deny all connections to all but the main index page:
# <httpdacl path="/*" types="blacklist" blacklist="*">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP config module: Allows the configuration of the server to be
# viewed over HTTP. Requires httpd to be loaded for it to function.
#<module name="httpd_config">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP stats module: Provides basic stats pages over HTTP.
# Requires httpd to be loaded for it to function.
#<module name="httpd_stats">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support.
# When this module is loaded <connect:allow> tags may have an optional
# useident="yes|no" boolean value, determining whether or not to lookup
# ident on users matching that connect tag.
#<module name="ident">
#
#-#-#-#-#-#-#-#-#-#-#-#-   IDENT CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Optional - If you are using the ident module, then you can specify  #
# the timeout for ident lookups here. If not defined, it will default #
# to 5 seconds. This is a non-blocking timeout which holds the user   #
# in a 'connecting' state until the lookup is complete.               #
# The bind value indicates which IP to bind outbound requests to.     #
# nolookupprefix: If on, the idents of users being in a connect class #
# with ident lookups disabled (i.e. <connect useident="off">) will be #
# prefixed with a "~". If off, the ident of those users will not be   #
# prefixed. Default is off.                                           #
#
#<ident timeout="5" nolookupprefix="no">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite exception module: Adds support for channel invite exceptions
# (+I).
#<module name="inviteexception">
# bypasskey: If this is enabled, exceptions will bypass +k as well as +i
#<inviteexception bypasskey="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 module: Provides the following IRCv3 extensions:
# extended-join, away-notify and account-notify. These are optional
# enhancements to the client-to-server protocol. An extension is only
# active for a client when the client specifically requests it, so this
# module needs the cap module to work.
#
# Further information on these extensions can be found at the IRCv3
# working group website:
# http://ircv3.net/irc/
#
#<module name="ircv3">
# The following block can be used to control which extensions are
# enabled. Note that extended-join can be incompatible with delayjoin
# and host cycling.
#<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 cap-notify module: Provides the cap-notify IRCv3.2 extension.
# Required for IRCv3.2 conformance.
#<module name="ircv3_capnotify">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 chghost module: Provides the chghost IRCv3.2 extension which
# allows capable clients to learn when the host/ident of another user
# changes without cycling the user. This module is compatible with the
# hostcycle module. If both are loaded, clients supporting the chghost
# extension will get the chghost message and won't see host cycling.
#<module name="ircv3_chghost">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 echo-message module: Provides the echo-message IRCv3.2
# extension which allows capable clients to get an acknowledgement when
# their messages are delivered and learn what modifications, if any,
# were applied to them.
#<module name="ircv3_echomessage">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 invite-notify module: Provides the invite-notify IRCv3.2
# extension which notifies supporting clients when a user invites
# another user into a channel. This respects <options:announceinvites>.
#<module name="ircv3_invitenotify">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 Strict Transport Security module: Provides the sts IRCv3.2
# extension which allows clients connecting insecurely to upgrade their
# connections to TLS.
#<module name="ircv3_sts">
#
# If using the ircv3_sts module you MUST define a STS policy to send
# to clients using the <sts> tag. This tag takes the following
# attributes:
#
# host     - A glob match for the SNI hostname to apply this policy to.
# duration - The amount of time that the policy lasts for. Defaults to
#            approximately two months by default.
# port     - The port on which TLS connections to the server are being
#            accepted. You MUST have a CA-verified certificate on this
#            port. Self signed certificates are not acceptable.
# preload  - Whether client developers can include your certificate in
#            preload lists.
#
# <sts host="*.example.com" duration="60d" port="6697" preload="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection +j X:Y.
# Closes the channel for N seconds if X users join in Y seconds.
#<module name="joinflood">
#
# The number of seconds to close the channel for:
#<joinflood duration="1m">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Jump server module: Adds support for the RPL_REDIR numeric.
# This module is oper-only.
# To use, JUMPSERVER must be in one of your oper class blocks.
# If your server is redirecting new clients and you get disconnected,
# do a REHASH from shell to open up again.
#<module name="jumpserver">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti auto rejoin: Adds support for prevention of auto-rejoin (+J).
#<module name="kicknorejoin">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: Adds the /KNOCK command and channel mode +K.
#<module name="knock">
#
# This setting specifies what to do when someone successfully /KNOCKs.
# If set to "notice", then a NOTICE will be sent to the channel.
# This is the default and the compatible setting, as it requires no
# special support from the clients.
# If set to "numeric" then a 710 numeric will be sent to the channel.
# This allows easier scripting but not all clients support it.
# If set to "both" then (surprise!) both will be sent.
#<knock notify="notice">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP module: Allows other SQL modules to access a LDAP database
# through a unified API.
# This modules is in extras. Re-run configure with:
# ./configure --enable-extras=m_ldap.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="ldap">
#<database module="ldap" id="ldapdb" server="ldap://localhost" binddn="cn=Manager,dc=inspircd,dc=org" bindauth="mysecretpass" searchscope="subtree">
# The server parameter indicates the LDAP server to connect to. The   #
# ldap:// style scheme before the hostname proper is MANDATORY.       #
#                                                                     #
# The binddn and bindauth indicate the DN to bind to for searching,   #
# and the password for the distinguished name. Some LDAP servers will #
# allow anonymous searching in which case these two values do not     #
# need defining, otherwise they should be set similar to the examples #
# above.                                                              #
#                                                                     #
# The searchscope value indicates the subtree to search under. On our #
# test system this is 'subtree'. Your mileage may vary.               #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP authentication module: Adds the ability to authenticate users  #
# via LDAP.                                                           #
#<module name="ldapauth">
#                                                                     #
# Configuration:                                                      #
#                                                                     #
# <ldapauth dbid="ldapdb"                                             #
#           baserdn="ou=People,dc=brainbox,dc=cc"                     #
#           attribute="uid"                                           #
#           allowpattern="Guest* Bot*"                                #
#           killreason="Access denied"                                #
#           verbose="yes"                                             #
#           host="$uid.$ou.inspircd.org"                              #
#           useusername="no">                                         #
#                                                                     #
# <ldapwhitelist cidr="10.42.0.0/16">                                 #
#                                                                     #
# <ldaprequire attribute="attr" value="val">                          #
#                                                                     #
# The baserdn indicates the base DN to search in for users. Usually   #
# this is 'ou=People,dc=yourdomain,dc=yourtld'.                       #
#                                                                     #
# The attribute value indicates the attribute which is used to locate #
# a user account by name. On POSIX systems this is usually 'uid'.     #
#                                                                     #
# The allowpattern value allows you to specify a space separated list #
# of wildcard masks which will always be allowed to connect           #
# regardless of if they have an account, for example guest and bot    #
# users.                                                              #
#                                                                     #
# The useusername setting chooses whether the user's username or      #
# nickname is used when locating a user account, if a username isn't  #
# provided in PASS.                                                   #
#                                                                     #
# Killreason indicates the QUIT reason to give to users if they fail  #
# to authenticate.                                                    #
#                                                                     #
# Setting the verbose value causes an oper notice to be sent out for  #
# every failed authentication to the server, with an error string.    #
#                                                                     #
# ldapwhitelist indicates that clients connecting from an IP in the   #
# provided CIDR do not need to authenticate against LDAP. It can be   #
# repeated to whitelist multiple CIDRs.                               #
#                                                                     #
# ldaprequire allows further filtering on the LDAP user, by requiring #
# certain LDAP attibutes to have a given value. It can be repeated,   #
# in which case the list will act as an OR list, that is, the         #
# authentication will succeed if any of the requirements in the list  #
# is satisfied.                                                       #
#                                                                     #
# host allows you to change the displayed host of users connecting    #
# from ldap. The string supplied takes formatters which are replaced  #
# from the DN. For instance, if your DN looks like:                   #
# uid=w00t,ou=people,dc=inspircd,dc=org, then the formatters uid, ou  #
# and dc will be available to you. If a key is given multiple times   #
# in the DN, the last appearance will take precedence.                #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP oper configuration module: Adds the ability to authenticate    #
# opers via LDAP.                                                     #
#<module name="ldapoper">
#                                                                     #
# Configuration:                                                      #
#                                                                     #
# <ldapoper dbid="ldapdb"
#           baserdn="ou=People,dc=brainbox,dc=cc"
#           attribute="uid">
#                                                                     #
# Available configuration items are identical to the same items in    #
# ldapauth above (except for the verbose setting, that is only        #
# supported in ldapauth).                                             #
# Please always specify a password in your <oper> tags even if the    #
# opers are to be authenticated via LDAP, so in case this module is   #
# not loaded the oper accounts are still protected by a password.     #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that    #
# are used to temporarily close/open the server for new connections.  #
# These commands require that the /LOCKSERV and /UNLOCKSERV commands  #
# are specified in a <class> tag that the oper is part of. This is so #
# you can control who has access to this possible dangerous command.  #
# If your server is locked and you get disconnected, do a REHASH from #
# shell to open up again.                                             #
# This module is oper-only.
#<module name="lockserv">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Map hiding module: replaces /MAP and /LINKS output to users with a  #
# message to see a website, set by maphide="http://test.org/map" in   #
# the <security> tag, instead.                                        #
#<module name="maphide">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Message flood module: Adds message/notice flood protection via
# channel mode +f.
#<module name="messageflood">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MLOCK module: Adds support for server-side enforcement of services
# side MLOCKs. Basically, this module suppresses any mode change that
# would likely be immediately bounced by services.
#<module name="mlock">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Modenotice module: Adds the /MODENOTICE command that allows opers to
# send notices to all users having the given user mode(s) set.
#<module name="modenotice">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Monitor module: Adds support for MONITOR which is used by clients to
# maintain notify lists.
#<module name="monitor">
#
# Set the maximum number of entries on a user's monitor list below.
#<monitor maxentries="30">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API.
# This module is in extras. Re-run configure with:
# ./configure --enable-extras=m_mysql.cpp
# and run make install, then uncomment this module to enable it.
#<module name="mysql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# mysql is more complex than described here, see the wiki for more    #
# info: https://wiki.inspircd.org/Modules/3.0/mysql                   #
#
#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Named modes module: Allows for the display and set/unset of channel
# modes via long-form mode names via +Z and the /PROP command.
# For example, to set a ban, do /mode #channel +Z ban=foo!bar@baz or
# /PROP #channel ban=foo!bar@baz
#<module name="namedmodes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# NAMESX module: Provides support for the NAMESX extension which allows
# clients to see all the prefixes set on a user without getting confused.
# This is supported by mIRC, x-chat, klient, and maybe more.
#<module name="namesx">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# National characters module:
# 1) Allows using national characters in nicknames.
# 2) Allows using custom (national) casemapping over the network.
#<module name="nationalchars">
#
# file - Location of the file which contains casemapping rules. If this
#        is a relative path then it is relative to "<PWD>/../locales"
#        on UNIX and "<PWD>/locales" on Windows.
# casemapping - The name of the casemapping sent to clients in the 005
#               numeric. If this is not set then it defaults to the name
#               of the casemapping file unless the file name contains a
#               space in which case you will have to specify it manually.
#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Provides channel mode +F X:Y
# which allows up to X nick changes in Y seconds.
#<module name="nickflood">
#
# The number of seconds to prevent nick changes for:
#<nickflood duration="1m">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again until unlocked.
# This module is oper-only.
# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
#<module name="nicklock">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No CTCP module: Adds the channel mode +C to block CTCPs and extban
# 'C' to block CTCPs sent by specific users.
#<module name="noctcp">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode and the Q: extban to deny
# certain users from kicking.
#<module name="nokicks">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode, as well as the 'N' extban.
# +N stops all users from changing their nick, the N extban stops
# anyone from matching a +b N:nick!user@host mask from changing their
# nick.
#<module name="nonicks">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No part message module: Adds extban 'p' to block part messages from #
# matching users.                                                     #
#<module name="nopartmsg">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No notice module: Adds the channel mode +T and the extban 'T' to
# block specific users from noticing the channel.
#<module name="nonotice">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Network business join module:
# Allows an oper to join a channel using /OJOIN, giving them +Y on the
# channel which makes them immune to kick/deop/etc.
#<module name="ojoin">
#
# Specify the prefix that +Y will grant here.
# Leave 'prefix' empty if you do not wish +Y to grant a prefix.
# If 'notice' is set to on, upon /OJOIN, the server will notice the
# channel saying that the oper is joining on network business.
# If 'op' is set to on, it will give them +o along with +Y.
#<ojoin prefix="!" notice="yes" op="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode and extban O:<mask>
# to ban, except, etc. specific oper types. For example
# /mode #channel +iI O:* is equivalent to channel mode +O, but you
# may also set +iI O:AdminTypeOnly to only allow admins.
# Modes +I and +e work in a similar fashion.
#<module name="operchans">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper join module: Auto-joins opers to a channel upon oper-up.
# This module is oper-only. For the user equivalent, see the conn_join
# module.
#<module name="operjoin">
#
#-#-#-#-#-#-#-#-#-#-#   OPERJOIN CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you are using the operjoin module, specify options here:         #
#                                                                     #
# channel     -      The channel name to join, can also be a comma    #
#                    separated list e.g. "#channel1,#channel2".       #
#                                                                     #
# override    -      If on, lets the oper join walking thru any modes #
#                    that might be set, even bans.                    #
#                                                                     #
#<operjoin channel="#channel" override="no">
#
# Alternatively you can use the autojoin="channellist" in a <type>    #
# tag to set specific autojoins for a type of oper, for example:      #
#
#<type name="Helper" autojoin="#help" classes="...">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper log module: Logs all oper commands to the server log (with log
# type "m_operlog" at default loglevel), and optionally to the 'r'
# snomask.
# This module is oper-only.
#<module name="operlog">
#
# If the following option is on then all oper commands will be sent to
# the snomask 'r'. The default is off.
#<operlog tosnomask="off">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper prefixing module: Adds a channel prefix mode +y which is given
# to all IRC operators automatically on all channels they are in.
# This prefix mode is more powerful than channel op and other regular
# prefix modes.
#
# Load this module if you want all your IRC operators to have channel
# operator powers.
#<module name="operprefix">
#
# You may additionally customise the prefix character.
#<operprefix prefix="!">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for separate message of the day
# on oper-up.
# This module is oper-only.
#<module name="opermotd">
#
#-#-#-#-#-#-#-#-#-#-#   OPERMOTD CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# If you are using the opermotd module, specify the motd here.   #
#                                                                     #
# onoper        - If on, the message is sent on /OPER, otherwise it's #
#                 only sent when /OPERMOTD is used.                   #
#                                                                     #
# processcolors - Allow color codes to be processed in the opermotd.  #
#                 Read the comment above <connect:allowmotdcolors> in #
#                 inspircd.conf.example for details.                  #
#                                                                     #
#<opermotd file="examples/opermotd.txt.example" onoper="yes" processcolors="false">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override.
# This module is oper-only.
#<module name="override">
#
#-#-#-#-#-#-#-#-#-#-#   OVERRIDE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Much of override's configuration relates to your oper blocks.       #
# For more information on how to allow opers to override, see:        #
# https://wiki.inspircd.org/Modules/3.0/override                      #
#                                                                     #
# noisy         - If enabled, all oper overrides will be announced    #
#                 via channel notice.                                 #
#                                                                     #
# requirekey    - If enabled, overriding on join requires a channel   #
#                 key of "override" to be specified                   #
#                                                                     #
# enableumode   - If enabled, usermode +O is required for override.   #
#                                                                     #
#<override noisy="yes" requirekey="no" enableumode="true">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents actions
# being taken by lower level opers against higher level opers.
# Specify the level as the 'level' parameter of the <type> tag.
# This module is oper-only.
#<module name="operlevels">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper.
# Specify the modes as the 'modes' parameter of the <type> tag
# and/or as the 'modes' parameter of the <oper> tag.
# This module is oper-only. For the user equivalent, see the 
# conn_umodes module.
#<module name="opermodes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password forwarding module: Forwards a password users can send on
# connect to the specified client below. The client is usually NickServ
# and this module is usually used to authenticate users with NickServ
# using their connect password.
#<module name="passforward">

<passforward
		# nick: nick to forward connect passwords to.
		nick="NickServ"

		# forwardmsg: Message to send to users using a connect password.
		# $nick will be the users' nick, $nickrequired will be the nick
		# of where the password is going (the nick above).
		# You can also use $user for the user ident string.
		forwardmsg="NOTICE $nick :*** Forwarding PASS to $nickrequired"

		# cmd: Command for the user to run when it receives a connect
		# password.
		cmd="PRIVMSG $nickrequired :IDENTIFY $pass">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
# To be useful, a hashing module like bcrypt also needs to be loaded.
#<module name="password_hash">
#
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
# To use this module, you must define a hash type for each oper's
# password you want to hash. For example:
#
#     <oper name="Brain"
#           host="ident@dialup15.isp.test.com"
#           hash="bcrypt"
#           password="$2a$10$Mss9AtHHslZTLBrXqM0FB.JBwD.UTSu8A48SfrY9exrpxbsRiRTbO"
#           type="NetAdmin">
#
# If you are using a hash algorithm which does not perform salting you can use
# HMAC to salt your passwords in order to prevent them from being looked up in
# a rainbow table.
#
#    hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
#
# Generate hashes using the /MKPASSWD command on the server.
# Don't run it on a server you don't trust with your password.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PBKDF2 module: Allows other modules to generate PBKDF2 hashes,
# usually for cryptographic uses and security.
# This module relies on other hash providers (e.g. SHA256).
#<module name="pbkdf2">
#
# iterations: Iterations the hashing function runs when generating new
# hashes.
# length: Length in bytes of the derived key.
#<pbkdf2 iterations="12288" length="32">
# You can override these values with specific values
# for specific providers if you want to. Example given for SHA256.
#<pbkdf2prov hash="sha256" iterations="24576">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Permanent channels module: Channels with the permanent channel mode
# will remain open even after everyone else has left the channel, and
# therefore keep things like modes, ban lists and topic. Permanent
# channels -may- need support from your Services package to function
# properly with them. This adds channel mode +P.
# This module is oper-only.
#<module name="permchannels">
#
# If you like, this module can write a config file of permanent channels
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
# If you want to do this, set the filename below, and uncomment the include.
#
# If 'listmodes' is true then all list modes (+b, +I, +e, +g...) will be
# saved. Defaults to false.
#<permchanneldb filename="permchannels.conf" listmodes="true">
#<include file="permchannels.conf">
#
# You may also create channels on startup by using the <permchannels> block.
#<permchannels channel="#opers" modes="isP" topic="Opers only.">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# through a unified API.
# This module is in extras. Re-run configure with:
# ./configure --enable-extras=m_pgsql.cpp
# and run make install, then uncomment this module to enable it.
#<module name="pgsql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# pgsql is more complex than described here, see the wiki for         #
# more: https://wiki.inspircd.org/Modules/3.0/pgsql                   #
#
#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Muteban: Implements extended ban 'm', which stops anyone matching
# a mask like +b m:nick!user@host from speaking on channel.
#<module name="muteban">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random quote module: Provides a random quote on connect.
# NOTE: Some of these may mimic fatal errors and confuse users and
# opers alike - BEWARE!
#<module name="randquote">
#
#-#-#-#-#-#-#-#-#-#-  RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Optional - If you specify to use the randquote module, then specify #
# below the path to the quotes file.                                  #
#                                                                     #
#<randquote file="quotes.txt">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel mode +L which redirects users to      #
# another channel when the channel has reached its user limit and     #
# user mode +L which stops redirection.                               #
#<module name="redirect">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for glob or wildcard (?/*) matching.
# You must have at least 1 provider loaded to use the filter or rline
# modules. This module has no additional requirements, as it uses the
# matching already present in InspIRCd core.
#<module name="regex_glob">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for PCRE (Perl-Compatible Regular
# Expressions). You need libpcre installed to compile and load this
# module. You must have at least 1 provider loaded to use the filter or
# rline modules.
#<module name="regex_pcre">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for RE2 Regular Expressions.
# You need libre2 installed and in your include/library paths in order
# to compile and load this module.
#<module name="regex_re2">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for POSIX regular expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# system (i.e.: any Linux, BSD, but not Windows). You must have at
# least 1 provider loaded to use filter or rline.
# On POSIX-compliant systems, regex syntax can be found by using the
# command: 'man 7 regex'.
#<module name="regex_posix">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for C++11 std::regex regular expressions.
# This module works on any fully compliant implementation of the C++11
# std::regex container. Examples for such are Visual C++ 2010 and newer
# but not libstdc++ (which GCC uses).
# You should verify that std::regex is supported by your setup before
# using this module, as it may compile normally but won't do anything
# on some implementations.
#<module name="regex_stdlib">
#
# Specify the regular expression engine to use here. Valid settings are
# bre, ere, awk, grep, egrep, ecmascript (default if not specified).
#<stdregex type="ecmascript">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for TRE regular expressions.
# This is the same regular expression engine used by UnrealIRCd, so
# if you are most familiar with the syntax of /SPAMFILTER from there,
# this is the provider you want. You need libtre installed in order
# to compile and load this module.
#<module name="regex_tre">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation module. If enabled, only
# registered users and opers can create new channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="regonlycreate">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK.
#<module name="remove">
#
# supportnokicks: If true, /REMOVE is not allowed on channels where the
# nokicks (+Q) mode is set. Defaults to false.
# protectedrank: Members having this rank or above may not be /REMOVE'd
# by anyone. Set to 0 to disable this feature. Defaults to 50000.
#<remove supportnokicks="true" protectedrank="50000">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# A module to block, kick or ban upon similar messages being uttered several times.
# Syntax [~*][lines]:[sec]{[:difference]}{[:matchlines]}
# ~ is to block, * is to ban, default is kick.
# lines - In mode 1 the amount of lines that has to match consecutively - In mode 2 the size of the backlog to keep for matching
# seconds - How old the message has to be before it's invalidated.
# distance - Edit distance, in percent, between two strings to trigger on.
# matchlines - When set, the function goes into mode 2. In this mode the function will trigger if this many of the last <lines> matches.
#
# As this module can be rather CPU-intensive, it comes with some options.
# maxbacklog - Maximum size that can be specified for backlog. 0 disables multiline matching.
# maxdistance - Max percentage of difference between two lines we'll allow to match. Set to 0 to disable edit-distance matching.
# maxlines - Max lines of backlog to match against.
# maxtime - Maximum period of time a user can set. 0 to allow any.
# size - Maximum number of characters to check for, can be used to truncate messages
# before they are checked, resulting in less CPU usage. Increasing this beyond 512
# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxtime="0" size="512">
#<module name="repeat">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="restrictchans">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="restrictmsg">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# R-Line module: Ban users through regular expression patterns.
#<module name="rline">
#
#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#
# If you wish to re-check a user when they change nickname (can be
# useful under some situations, but *can* also use CPU with more users
# on a server) then set 'matchonnickchange' to yes.
# Also, this is where you set what Regular Expression engine is to be
# used. If you ever change it while running, all of your R-Lines will
# be wiped. This is the regex engine used by all R-Lines set, and
# regex_<engine> must be loaded, or rline will be non-functional
# until you load it or change the engine to one that is loaded.
#
#<rline matchonnickchange="yes" engine="pcre">
#
# Generally, you will NOT want to use 'glob' here, as this turns
# rline into just another gline. The exceptions are that rline will
# always use the full "nick!user@host realname" string, rather than only
# user@host, but beware that only the ? and * wildcards are available,
# and are the only way to specify where the space can occur if you do
# use glob. For this reason, is recommended to use a real regex engine
# so that at least \s or [[:space:]] is available.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RMODE module: Adds the /RMODE command
# Allows channel mods to remove list modes en masse.
# Syntax: /rmode <channel> <mode> [pattern]
# E.g. '/rmode #Channel b m:*' will remove all mute-extbans on the channel.
#<module name="rmode">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command which forcibly joins a user
# to the given channel.
# This module is oper-only.
# To use, SAJOIN must be in one of your oper class blocks.
# Opers need the users/sajoin-others priv to be able to /SAJOIN users
# other than themselves.
#<module name="sajoin">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAKICK module: Adds the /SAKICK command which kicks a user from the
# given channel.
# This module is oper-only.
# To use, SAKICK must be in one of your oper class blocks.
#<module name="sakick">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the /SAMODE command which allows server operators
# to change modes on a channel without requiring them to have any
# channel priviliges. Also allows changing user modes for any user.
# This module is oper-only.
# To use, SAMODE must be in one of your oper class blocks.
#<module name="samode">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Adds the /SANICK command which allows opers to change
# users' nicks.
# This module is oper-only.
# To use, SANICK must be in one of your oper class blocks.
#<module name="sanick">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the /SAPART command which forcibly parts a user
# from a channel.
# This module is oper-only.
# To use, SAPART must be in one of your oper class blocks.
#<module name="sapart">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the /SAQUIT command which forcibly quits a user.
# This module is oper-only.
# To use, SAQUIT must be in one of your oper class blocks.
#<module name="saquit">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SATOPIC module: Adds the /SATOPIC command which allows changing the
# topic on a channel without requiring any channel priviliges.
# This module is oper-only.
# To use, SATOPIC must be in one of your oper class blocks.
#<module name="satopic">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SASL authentication module: Provides support for IRC Authentication
# Layer via AUTHENTICATE. Note: You also need to have cap loaded
# for SASL to work.
#<module name="sasl">
# Define the following to your services server name to improve security
# by ensuring the SASL messages are only sent to the services server
# and not to all connected servers. This prevents a rogue server from
# capturing SASL messages and disables the SASL cap when services is
# down.
#<sasl target="services.mynetwork.com">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
#<module name="securelist">
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Securelist can be harmful to some IRC search engines. To prevent    #
# securelist blocking these sites from listing, define exception tags #
# as shown below:                                                     #
#<securehost exception="*@*.netsplit.de">
#<securehost exception="*@*.ircdriven.com">
#<securehost exception="*@*.ircs.me">
#                                                                     #
# Define the following variable to change how long a user must wait   #
# before issuing a LIST. If not defined, defaults to 60 seconds.      #
#                                                                     #
#<securelist waittime="1m">                                           #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# UnrealIRCD +S services mode.
#<module name="servprotect">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# See nicks module: Adds snomask +n and +N which show local and remote
# nick changes.
# This module is oper-only.
#<module name="seenicks">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set idle module: Adds a command for opers to change their idle time.
# This module is oper-only.
# To use, SETIDLE must be in one of your oper class blocks.
#<module name="setidle">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M.
# This module implements the 'identified' state via account names,
# and is similar in operation to the way asuka and ircu handle services.
#
# At the same time, this offers +r for users and channels to mark them
# as identified separately from the idea of a master account, which
# can be useful for services which are heavily nick-as-account centric.
#
# Also of note is that this module implements two extbans:
# +b R: (stop matching account names from joining)
# +b U:n!u@h (blocks matching unregistered users)
#
#<module name="services_account">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command.
# This module is oper-only.
# To use, SETHOST must be in one of your oper class blocks.
# See the chghost module for how to customise valid chars for hostnames.
#<module name="sethost">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Setident module: Adds the /SETIDENT command.
# This module is oper-only.
# To use, SETIDENT must be in one of your oper class blocks.
#<module name="setident">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command.
#<module name="setname">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Serverban: Implements extended ban 's', which stops anyone connected
# to a server matching a mask like +b s:server.mask.here from joining.
#<module name="serverban">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA1 module: Allows other modules to generate SHA1 hashes.
# Required by the WebSocket module.
#<module name="sha1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Showfile: Provides support for showing a text file to users when    #
# they enter a command.                                               #
# This module adds one command for each <showfile> tag that shows the #
# given file to the user as a series of messages or numerics.         #
#<module name="showfile">                                             #
#                                                                     #
#-#-#-#-#-#-#-#-#-#-# SHOWFILE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# name    - The name of the command which displays this file. This is #
#           the only mandatory setting, all others are optional.      #
# file    - The text file to be shown to the user.                    #
#           By default same as the command name.                      #
# method  - How should the file be shown?                             #
#           * numeric: Send contents using a numeric                  #
#             (similar to /MOTD; the default).                        #
#           * notice:  Send contents as a series of notices.          #
#           * msg:     Send contents as a series of private messages. #
# colors  - If true, color codes (\c, \b, \u, etc.) will be processed #
#           and sent as ANSI colors. If false (default) the file will #
#           be displayed as-is.                                       #
#                                                                     #
# When using the method "numeric", the following extra settings are   #
# available:                                                          #
#                                                                     #
# introtext    - Introductory line, "Showing <name>" by default.      #
# intronumeric - Numeric used for the introductory line.              #
# numeric      - Numeric used for sending the text itself.            #
# endtext      - Ending line, "End of <name>" by default.             #
# endnumeric   - Numeric used for the ending line.                    #
#                                                                     #
#<showfile name="RULES"
#          file="rules.txt"
#          colors="true"
#          introtext="Server rules:"
#          endtext="End of server rules.">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Show whois module: Adds the +W usermode which allows opers to see
# when they are /WHOIS'd.
# This module is oper-only by default.
#<module name="showwhois">
#
# If you wish, you may also let users set this mode. Only opers with the
# users/auspex priv will see real hosts of people, though.
#<showwhois opersonly="yes"
#
# You may also set whether or not users should receive whois notices,
# should they be /WHOIS'd by an oper.
#showfromopers="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Shun module: Provides the /SHUN command, which stops a user from
# executing all except configured commands.
# This module is oper-only.
# To use, SHUN must be in one of your oper class blocks.
#<module name="shun">
#
# You may also configure which commands you wish a user to be able to
# perform when shunned. It should be noted that if a shunned user
# issues QUIT or PART then their message will be removed, as if they
# did not issue one.
#
# You can optionally let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels via
# channel mode +z and the 'z' extban which matches SSL client
# certificate fingerprints.
# Does not do anything useful without a working SSL module and the
# sslinfo module (see below).
#<module name="sslmodes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
# if enabled. You must answer 'yes' in ./configure when asked or
# manually symlink the source for this module from the directory
# src/modules/extra, if you want to enable this, or it will not load.
#<module name="ssl_gnutls">
#
#-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# ssl_gnutls is too complex to describe here, see the wiki:           #
# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls                    #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL info module: Allows users to retrieve information about other
# users' peer SSL certificates and keys. This can be used by client
# scripts to validate users. For this to work, one of ssl_gnutls
# or ssl_openssl must be loaded. This module also adds the
# "* <user> is using a secure connection" whois line, the ability for
# opers to use SSL cert fingerprints to verify their identity and the
# ability to force opers to use SSL connections in order to oper up.
# It is highly recommended to load this module if you use SSL on your
# network.
# For how to use the oper features, please see the first example <oper> tag
# in opers.conf.example.
#
#<module name="sslinfo">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# mbedTLS SSL module: Adds support for SSL/TLS connections using mbedTLS.
#<module name="ssl_mbedtls">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# the source for this module from the directory src/modules/extra, if
# you want to enable this, or it will not load.
#<module name="ssl_openssl">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# ssl_openssl is too complex to describe here, see the wiki:          #
# https://wiki.inspircd.org/Modules/3.0/ssl_openssl                   #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip color module: Adds channel mode +S that strips color codes and
# all control codes except CTCP from all messages sent to the channel.
#<module name="stripcolor">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Silence module: Adds support for the /SILENCE command, which allows
# users to have a server-side ignore list for their client.
#<module name="silence">
#
# Set the maximum number of entries allowed on a user's silence list.
#<silence maxentries="32"
#
# Whether messages from U-lined servers will bypass silence masks.
#exemptuline="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3          #
# databases through a unified API.                                    #
# This module is in extras. Re-run configure with:                    #
# ./configure --enable-extras=m_sqlite3.cpp
# and run make install, then uncomment this module to enable it.      #
#
#<module name="sqlite3">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# sqlite is more complex than described here, see the wiki for more   #
# info: https://wiki.inspircd.org/Modules/3.0/sqlite3                 #
#
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum).
#
#<module name="sqlauth">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# sqlauth is too complex to describe here, see the wiki:              #
# https://wiki.inspircd.org/Modules/3.0/sqlauth                       #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
#
#<module name="sqloper">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# dbid       - Database ID to use (see SQL modules).                  #
# hash       - Hashing provider to use for password hashing.          #
#                                                                     #
# See also: https://wiki.inspircd.org/Modules/3.0/sqloper             #
#                                                                     #
#<sqloper dbid="1" hash="bcrypt">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartTLS module: Implements STARTTLS, which allows clients          #
# connected to non SSL enabled ports to enable SSL, if a proper SSL   #
# module is loaded (either ssl_gnutls or ssl_openssl).                #
#<module name="starttls">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be   #
# added/removed by Services.                                          #
#<module name="svshold">
# SVSHOLD does not generate server notices by default, you can turn
# notices on by uncommenting the next line.
#<svshold silent="false">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitrary lines to user WHOIS.
# This module is oper-only.
# To use, SWHOIS must be in one of your oper class blocks.
#<module name="swhois">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed channel bans with the /TBAN command.
#<module name="timedbans">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test line module: Adds the /TLINE command, used to test how many
# users a /GLINE or /ZLINE etc. would match.
# This module is oper-only.
# To use, TLINE must be in one of your oper class blocks.
#<module name="tline">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Topiclock module: implements server-side topic locking to achieve deeper
# integration with services packages.
#<module name="topiclock">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# UHNAMES support module: Adds support for the IRCX style UHNAMES
# extension, which displays ident and hostname in the names list for
# each user, saving clients from doing a WHO on the channel.
# If a client does not support UHNAMES it will not enable it, this will
# not break incompatible clients.
#<module name="uhnames">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
#<module name="uninvite">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command.
# Allows users to query their own IP, also allows opers to query the IP
# of anyone else.
#<module name="userip">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Vhost module: Adds the VHOST command which allows for adding virtual
# hosts which are accessible using a username and password in the config.
#<module name="vhost">
#
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# user       - Username for the vhost.                                #
#                                                                     #
# pass       - Password for the vhost.                                #
#                                                                     #
# hash       - The hash for the specific user (optional)              #
#              password_hash and a hashing module must be loaded for  #
#              this to work.                                          #
#                                                                     #
# host       - Vhost to set.                                          #
#
#<vhost user="some_username" pass="some_password" host="some.host.test.cc">
#<vhost user="foo" password="$2a$10$iTuYLT6BRhRlOgzfsW9oPe62etW.oXwSpyKw5rJit64SGZanLXghO" hash="bcrypt" host="some.other.host.example.com">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="watch">
#
# Set the maximum number of entries on a user's watch list below.
#<watch maxentries="32">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# WebSocket module: Adds HTML5 WebSocket support.
# Specify hook="websocket" in a <bind> tag to make that port accept
# WebSocket connections. Compatible with SSL/TLS.
# Requires SHA-1 hash support available in the sha1 module.
#<module name="websocket">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
# in a file which is re-loaded on restart. This is useful
# for two reasons: it keeps bans so users may not evade them, and on
# bigger networks, server connections will take less time as there will
# be a lot less bans to apply - as most of them will already be there.
#<module name="xline_db">

# Specify the filename for the xline database here.
#<xlinedb filename="xline.db">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#    ____                _   _____ _     _       ____  _ _   _        #
#   |  _ \ ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
#   | |_) / _ \/ _` |/ _` |   | | | '_ \| / __| |  _ \| | __| |       #
#   |  _ <  __/ (_| | (_| |   | | | | | | \__ \ | |_) | | |_|_|       #
#   |_| \_\___|\__,_|\__,_|   |_| |_| |_|_|___/ |____/|_|\__(_)       #
#                                                                     #
# To link servers to InspIRCd, you MUST load the spanningtree module. #
# If you don't do this, server links will NOT work at all.            #
# This is by design, to allow for the implementation of other linking #
# protocols in modules in the future.                                 #

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spanning tree module: Allows linking of servers using the spanning
# tree protocol (see the READ THIS BIT section above).
# You will almost always want to load this.
#
#<module name="spanningtree">