#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # These tags define which modules will be loaded on startup by your # # server. Add modules without any paths. When you make your ircd # # using the 'make' command, all compiled modules will be moved into # # the folder you specified when you ran ./configure. The module tag # # automatically looks for modules in this location. # # If you attempt to load a module outside of this location, either # # in the config, or via /LOADMODULE, you will receive an error. # # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # # http://wiki.inspircd.org/Modules for a list of modules and # # each modules link for any additional conf tags they require. # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # To link servers to InspIRCd, you MUST load the m_spanningtree # # module. If you don't do this, server links will NOT work at all. # # This is by design, to allow for the implementation of other linking # # protocols in modules in the future. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MD5 Module - Allows other modules to generate MD5 hashes, usually for # cryptographic uses and security. # # IMPORTANT: # Other modules such as m_cloaking.so and m_password_hash.so may rely on # this module being loaded to function. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 Module - Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules such as m_password_hash.so may rely on this module being # loaded to function. Certain modules such as m_spanningtree.so will # function without this module but when it is loaded their features will # be enhanced (for example the addition of HMAC authentication). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules may rely on this module being loaded to function. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Abbreviation module: Provides the ability to abbreviate commands a-la # BBC BASIC keywords. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alias module: Allows you to define server-side command aliases # # # Fantasy settings: # # # # prefix: # Set the prefix for in-channel aliases (fantasy commands) to the # specified character. If not set, the default is "!". # allowbots: # If this is set to no, +B clients will not be able to use fantasy # commands. If not set, the default is no. # #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_alias.so module loaded, you may also define # # aliases as shown below. They are commonly used to provide shortcut # # commands to services, however they are not limited to just this use.# # An alias tag requires the following values to be defined in it: # # # # text - The text to detect as the actual command line, # # Cant contain spaces, but case insensitive. # # You may have multiple aliases with the same # # command name (text="" value), however the first # # found will be executed if its format value is # # matched, or it has no format value. Aliases are # # read from the top of the file to the bottom. # # # # usercommand - If this is true, the alias can be run simply as # # /aliasname. Defaults to true. # # # # channelcommand - If this is true, the alias can be used as an # # in-channel alias or 'fantasy command', prefixed # # by the fantasy prefix character, !aliasname by # # default. Defaults to false. # # # # format - If this is defined, the parameters of the alias # # must match this glob pattern. For example if you # # want the first parameter to start with a # for # # the alias to be executed, set format="#*" in the # # alias definition. Note that the :'s which are # # part of IRC formatted lines will be preserved # # for matching of this text. This value is # # optional. # # # # replace - The text to replace 'text' with. Usually this # # will be "PRIVMSG ServiceName :$2-" or similar. # # You may use the variables $1 through $9 in the # # replace string, which refer to the first through # # ninth word in the original string typed by the # # user. You may also use $1- through $9- which # # refer to the first word onwards, through to the # # ninth word onwards, e.g. if the user types the # # command "foo bar baz qux quz" then $3- will hold # # "baz qux quz" and $2 will contain "bar". You may # # also use the special variables: $nick, $ident, # # $host and $vhost, and you may separate multiple # # commands with a newline (which can be written in # # the file literally, or encoded as &nl; or \n # # depending on the config format setting). # # # # requires - If you provide a value for 'requires' this means # # the given nickname MUST be online for the alias # # to successfully trigger. If they are not, then # # the user receives a 'no such nick' 401 numeric. # # # # uline - Defining this value with 'yes', 'true' or '1' # # will ensure that the user given in 'requires' # # must also be on a u-lined server, as well as # # actually being on the network. If the user is # # online, but not on a u-lined server, then an # # oper-alert is sent out as this is possibly signs # # of a user trying to impersonate a service. # # # # operonly - Defining this value, with a value of 'yes', '1' # # or true will make the alias oper only. If a non- # # oper attempts to use the alias, it will appear # # to not exist. # # # # # # # # # # # # # # # # # An example of using the format value to create an alias with two # different behaviours depending on the format of the parameters. # # # # # # This alias fixes a glitch in xchat 2.6.x and above and the way it # assumes IDENTIFY must be prefixed by a colon (:) character. It should # be placed ABOVE the default NICKSERV alias (the first example) listed # above. # # # # You may also add aliases to trigger based on something said in a # channel, aka 'fantasy' commands, configured in the same manner as any # other alias, with usercommand="no" and channelcommand="yes" The # command must be preceded by the fantasy prefix when used. # # # # This would be used as "!cs ", with the channel # being automatically inserted after the command in the message to # ChanServ, assuming the fantasy prefix is "!". #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Allowinvite module: Gives channel mode +A to allow all users to use # /invite, and extban A to deny invite from specific masks # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alltime module: Shows time on all connected servers at once. # This module is oper-only and provides /alltime. # To use, ALLTIME must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Auditorium module: Adds channel mode +u which makes everyone else # except you in the channel invisible, used for large meetings etc. # # # Auditorium settings: # # # # opvisible (auditorium-vis in exemptchanops): # Show channel ops to all users # opcansee (auditorium-see in exemptchanops): # Allow ops to see all joins/parts/kicks in the channel # opercansee: # Allow opers (channels/auspex) to see see all joins/parts/kicks in the channel # # Exemptchanops can be used to adjust the level at which users become visible or # the level at which they can see the full membe list of the channel. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Autoop module: Adds basic channel access controls via the +w listmode. # For example, +w o:R:Brain will op anyone identified to the account "Brain" # on join. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban except module: Adds support for channel ban exceptions (+e) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban redirection module: Allows bans which redirect to a specified # channel. e.g. +b nick!ident@host#channelbanneduserissentto # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block amsg module: Attempt to block all usage of /amsg and /ame # # #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_blockamsg.so module loaded, you can configure it # # with the tag: # # # # delay - How many seconds between two messages to force # # them to be recognised as unrelated. # # action - Any of 'notice', 'noticeopers', 'silent', 'kill' # # or 'killopers'. Define how to take action when # # a user uses /amsg or /ame. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block CAPS module: Blocking all-CAPS messages with cmode +B # # # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # percent - How many percent of text must be caps before text # # will be blocked. # # # # minlen - The minimum length a line must be for the block # # percent to have any effect. # # # # capsmap - A list of chars to be considered CAPS, this was # # you can add CAPS for your language. Also you can # # add things like ! and space to further lock down # # on caps usage. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block color module: Blocking color-coded messages with cmode +c # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Botmode module: Adds the user mode +B # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CallerID module: Adds usermode +g which activates hybrid-style # callerid (== block all private messages unless you /accept first) # # #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # maxaccepts - Maximum number of entires a user can add to his # # /accept list. Default is 16 entries. # # operoverride - Can opers (note: ALL opers) ignore callerid mode? # # Default is no. # # tracknick - Preserve /accept entries when a user changes nick? # # If no (the default), the user is removed from # # everyone's accept list if he changes nickname. # # cooldown - Amount of time (in seconds) that must pass since # # the last notification sent to a user before he can # # be sent another. Default is 60 (1 minute). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CAP module: Provides the CAP negotiation mechanism seen in # ratbox-derived ircds # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CBAN module: Lets you disallow channels from being used at runtime. # This module is oper-only and provides /cban. # To use, CBAN must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Censor module: Adds channel and user mode +G # # #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_censor module, then you must # # specify some censor tags. See also: # # http://wiki.inspircd.org/Modules/censor # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CGI:IRC module: Adds support for automatic host changing in CGI:IRC # (http://cgiirc.sourceforge.net). # # #-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # # Optional - If you specify to use m_cgiirc, then you must specify one # or more cgihost tags which indicate authorised CGI:IRC servers which # will be connecting to your network, and an optional cgiirc tag. # For more information see: http://wiki.inspircd.org/Modules/cgiirc # # Set to yes if you want to notice opers when CGI clients connect # # # The type field indicates where the module should get the real # client's IP address from, for further information, please see the # CGI:IRC documentation. # # Old style: # # Get IP from PASS # # Get IP from ident # # See the docs # New style: # # Get IP from WEBIRC # # IMPORTANT NOTE: # --------------- # # When you connect CGI:IRC clients, there are two connect classes which # apply to these clients. When the client initially connects, the connect # class which matches the cgi:irc site's host is checked. Therefore you # must raise the maximum local/global clients for this ip as high as you # want to allow cgi clients. After the client has connected and is # determined to be a cgi:irc client, the class which matches the client's # real IP is then checked. You may set this class to a lower value, so that # the real IP of the client can still be restricted to, for example, 3 # sessions maximum. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel create module: Adds snomask +j, which will notify opers of # any new channels that are created. # This module is oper-only. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel filter module: Allows channel-op defined message # filtering using simple string matches (channel mode +g) # # # If hidemask is set to yes, the user will not be shown the mask when # his/her message is blocked. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel History module: Displays the last 'X' lines of chat to a user # joining a channel with +H 'X:T' set; 'T' is the maximum time to keep # lines in the history buffer. Designed so that the new user knows what # the current topic of conversation is when joining the channel. # # # Set the maximum number of lines allowed to be stored per channel below. # This is the hard limit for 'X'. # If notice is set to yes, joining users will get a NOTICE before playback # telling them about the following lines being the pre-join history. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel logging module: used to send snotice output to channels, to # allow staff to centrally monitor and discuss network activity. # # The "channel" field is where you want the messages to go, "snomasks" # is what snomasks you want to be sent to that channel. Multiple tags # are allowed. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel Names module: Allows disabling channels which have certain # characters in the channel name such as bold, colorcodes, etc which # can be quite annoying and allow users to on occasion have a channel # that looks like the name of another channel on the network. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channelban: Implements extended ban j:, which stops anyone in already # in a channel matching a mask like +b j:#channel*mask from joining. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Chanprotect module: gives +q and +a channel modes # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Check module: gives /check # Check is useful for looking up information on channels, # users, IP addresses and hosts. # This module is oper-only. # To use, CHECK must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGHOST module: Adds the /CHGHOST command # This module is oper-only. # To use, CHGHOST must be in one of your oper class blocks. # NOTE: Services will not be able to set vhosts on users if this module # isn't loaded. If you're planning on running services, you probably # want to load this. # # #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# # Optional - If you want to use special chars for hostnames you can # # specify your own custom list of chars with the tag: # # # # charmap - A list of chars accepted as valid by the /CHGHOST # # and /SETHOST commands. Also note that the list is # # case-sensitive. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGIDENT module: Adds the /CHGIDENT command # This module is oper-only. # To use, CHGIDENT must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGNAME module: Adds the /CHGNAME command # This module is oper-only. # To use, CHGNAME must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support. # Relies on the module m_md5.so being loaded before m_cloaking.so in # the configuration file. # To use, you should enable m_conn_umodes and add +x as # an enabled mode. See the m_conn_umodes module for more information. # # #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # If you specify the m_cloaking.so module as above, you must define # # cloak keys, and optionally a cloak prefix as shown below. The cloak # # keys must be shared across the network for correct cloaking. # # # # There are four methods of cloaking: # # # # half Cloak only the "unique" portion of a host; show # # the last 2 parts of the domain, /16 subnet of IPv4 # # or /48 subnet of the IPv6 address. # # # # full Cloak the users completely, using three slices for # # common CIDR bans (IPv4: /16, /24; IPv6: /48, /64) # # # # These methods use a single key that can be any length of text. # # An optional prefix may be specified to mark cloaked hosts. # # # # The following methods are maintained for backwards compatibility; # # they are slightly less secure, and always hide unresolved IPs # # # # compat-host InspIRCd 1.2-compatible host-based cloaking # # compat-ip InspIRCd 1.2-compatible ip-always cloaking # # # # You must specify key1, key2, key3, key4 for the compat cloaking # # modes; the values must be less than 0x80000000 and should be picked # # at random. Prefix is mandatory, will default to network name if not # # specified, and will always have a "-" appended. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # #-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Close module: Allows an oper to close all unregistered connections. # This module is oper-only and provides /close. # To use, CLOSE must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Clones module: Adds an oper command /CLONES for detecting cloned # users. Warning: This module may be resource intensive when its # command is issued, use with care. # This module is oper-only. # To use, CLONES must be in one of your oper class blocks. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Common channels module: Adds user mode +c, which, when set, requires # that users must share a common channel with you to PRIVMSG or NOTICE # you. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Join: Allows you to force users to join one or more channels # automatically upon connecting to the server. # # #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # If you have m_conn_join.so loaded, you can configure it using the # follow values: # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Usermodes: Set modes on users when they connect # When this module is loaded tags may have an optional # modes="" value, which contains modes to add or remove from users # when they connect to the server. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Wait-for-Pong: Don't let a user connect until they PONG # # #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_conn_waitpong.so module loaded, configure it with # # the tag: # # # # sendsnotice - Whether to send a snotice on connect, like other # # older ircds # # # # killonbadreply - Whether to kill the user if they send the wrong # # PONG reply. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel cycle module. Server side /hop, with +ilk etc bypass. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connectban: Provides IP connection throttling. Any IP range that connects # too many times (configurable) in an hour is zlined for a (configurable) # duration, and their count resets to 0. # # ipv4cidr and ipv6cidr allow you to turn the comparison from individual # IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling # over whole ISPs/blocks of IPs, which may be needed to prevent attacks. # # # This allows for 10 connections in an hour with a 10 minute ban if that is exceeded. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connection throttle module. Configuration: # # #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # seconds, maxconns - Amount of connections per . # # timeout - Time to wait after the throttle was activated # before deactivating it. Be aware that the time # is seconds + timeout. # # quitmsg - The message that users get if they attempt to # connect while the throttle is active. # # bootwait - Amount of time in seconds to wait before enforcing # the throttling when the server just booted. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Custom prefixes : allows for channel prefixes to be added. # This can replace m_chanprotect and m_halfop, except for services that # recognise those modules by name # # # name The name of the mode, must be unique from other modes # letter The letter used for this mode. Required. # prefix The prefix used for nicks with this mode. Not required. # rank A numeric rank for this prefix, defining what permissions it gives # VOICE_VALUE is 10000, HALFOP_VALUE is 20000, OP_VALUE is 30000 # ranktoset The numeric rank required to set/unset this mode. Defaults to rank. # depriv Can you remove the mode from yourself? Defaults to yes. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Custom title module: Adds the /TITLE command which allows for trusted # users to gain a custom whois line and a optional # vhost can be specified. # # #-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # name - The username used to identify # password - The password used to identify # hash - The hash for the specific user's password (optional) # m_password_hash.so and a hashing module must be loaded for this to work # host - Allowed hostmask [optional] # title - Title shown in whois # vhost - Displayed host [optional] # # #<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat"> #<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DCCALLOW module: Adds the /DCCALLOW command #<module name="m_dccallow.so"> # #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # blockchat - Whether to block DCC CHAT as well as DCC SEND # length - Default duration of entries in DCCALLOW list # action - Default action to take if no action is specified # can be 'block' or 'allow' # # File configuration: # pattern - The glob pattern to match against # action - Action to take if a user attempts to send a file # that matches this pattern, can be 'block' or 'allow' # #<dccallow blockchat="yes" length="5m" action="block"> #<banfile pattern="*.exe" action="block"> #<banfile pattern="*.txt" action="allow"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deaf module: adds support for ircu style usermode +d - deaf to # channel messages and channel notices. #<module name="m_deaf.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Delay join module: Adds the channel mode +D which delays all JOIN # messages from users until they speak. If they quit or part before # speaking, their quit or part message will not be shown to the channel # which helps cut down noise on large channels in a more friendly way # than the auditorium mode. Only channel ops may set the +D mode. #<module name="m_delayjoin.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Delay message module: Adds the channel mode +d which disallows a user # from talking in the channel unless they've been joined for X seconds. # Settable a la: /mode +d 30 #<module name="m_delaymsg.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deny Channels: Deny Channels from being used by users #<module name="m_denychans.so"> # #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_denychans.so module loaded, you need to specify # # the channels to deny: # # # # name - The channel name to deny. (glob masks are ok) # # # # allowopers - If operators are allowed to override the deny. # # # # reason - Reason given for the deny. # # # # redirect - Redirect the user to a different channel # # # #<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> # #<badchan name="#heaven" redirect="#hell" reason="Nice try!"> # # # # Redirects will not work if the target channel is set +L. # # # # Additionally, you may specify channels which are allowed, even if # # a badchan tag specifies it would be denied: # #<goodchan name="#godsleeps"> # # Glob masks are accepted here also. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Devoice Module: Let users devoice themselves. #<module name="m_devoice.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DNS Blacklist Module: Provides support for looking up IPs on one or # # more blacklists. # #<module name="m_dnsbl.so"> # # # # For configuration options please see the wiki page for m_dnsbl at # # http://wiki.inspircd.org/Modules/dnsbl # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Exempt Channel Operators Module: Provides support for allowing # # channel operators to be exempt from some channel modes. Supported # # modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, # # filter, regmoderated, nonick, nonotice, and stripcolor. # #<module name="m_exemptchanops.so"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Filter module: Provides message filtering, similar to SPAMFILTER. #<module name="m_filter.so"> # # # This module depends upon a regex provider such as m_regex_pcre or # # m_regex_glob to function. You must specify which of these you want # # m_filter to use via the tag below. # # # # Valid engines are: # # # # glob - Glob patterns, provided via m_regex_glob.so # # pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre # # tre - TRE regexps, provided via m_regex_tre.so, requires libtre # # posix - POSIX regexps, provided via m_regex_posix.so, not availale # # on windows, no dependencies on other operating systems. # # # #<filteropts engine="glob"> # # # # Your choice of regex engine must match on all servers network-wide. # # You may specify specific channels that are exempt from being filtered: #<exemptfromfilter channel="#blah"> # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_filter module, then # # specfiy below the path to the filter.conf file, or define some # # <filter> tags. # # # #<include file="conf/filter.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Gecosban: Implements extended ban r:, which stops anyone matching # a mask like +b r:*realname?here* from joining a channel. #<module name="m_gecosban.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GeoIP module: Allows the server admin to match users by country code. # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp # and run make install, then uncomment this module to enable it. # This module requires GeoIP to be installed on your system, # use your package manager to find the appropriate packages # or check the InspIRCd wiki page for this module. #<module name="m_geoip.so"> # # The actual allow/ban actions are done by connect classes, not by the # GeoIP module. An example connect class to ban people from russia or # turkey: # # <connect deny="*" geoip="TR,RU"> # # The country code must be in capitals and should be an ISO country # code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc) # will be assigned the country code "UNK". Since connect classes are # matched from top down, your deny classes must be above your allow # classes for them to match. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Globops module: gives /GLOBOPS and SNOMASK +g # This module is oper-only. # To use, GLOBOPS must be in one of your oper class blocks. #<module name="m_globops.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Global load module: Allows loading and unloading of modules network- # wide (USE WITH EXTREME CAUTION!) # This module is oper-only and provides /gloadmodule, /gunloadmodule # and /greloadmodule. # To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE # must be in one of your oper class blocks. #<module name="m_globalload.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Halfop module: Provides the +h (halfops) channel status mode. #<module name="m_halfop.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command #<module name="m_helpop.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_helpop.so module, then # # specify below the path to the helpop.conf file, or if you like to # # make a mess, define your helpop tags in this conf. # # # #<include file="conf/inspircd.helpop-full.example"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HIDECHANS module: Allows opers to hide their channels list from non- # opers by setting user mode +I on themselves. #<module name="m_hidechans.so"> # # HIDECHANS can optionally prevent opers from seeing channels on a +I # user, for more privacy if set to true. # This setting is not recommended for most mainstream networks. #<hidechans affectsopers="false"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HIDEOPER module: Allows opers to hide their oper status from non- # opers by setting user mode +H on themselves. # This module is oper-only. #<module name="m_hideoper.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hostchange module: Allows a different style of cloaking #<module name="m_hostchange.so"> # #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Optional - If you choose to use the m_hostchange.so module. # # Config Help - See http://wiki.inspircd.org/Modules/hostchange # # # #<host suffix="polarbears.org" separator="." prefix=""> #<hostchange mask="*@fbi.gov" action="addnick"> #<hostchange mask="*r00t@*" action="suffix"> #<hostchange mask="a@b.com" action="set" value="blah.blah.blah"> #<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # httpd module: Provides http server support for InspIRCd #<module name="m_httpd.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # If you choose to use the m_httpd.so module, then you will need to add # a <bind> tag with type "httpd", and load at least one of the other # m_httpd_* modules to provide pages to display. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http ACL module: Provides access control lists for m_httpd dependent # modules. Use this module to restrict pages by IP address and by # password. # #<module name="m_httpd_acl.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # Restrict access to the m_httpd_stats module to all but the local # network and when the correct password is specified: # # <httpdacl path="/stats*" types="password,whitelist" # username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*"> # # Deny all connections to all but the main index page: # # <httpdacl path="/*" types="blacklist" blacklist="*"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http config module: Allows the server's configuration to be viewed # over HTTP. Requires m_httpd.so to be loaded for it to function. #<module name="m_httpd_config.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http stats module: Provides basic stats pages over HTTP # Requires m_httpd.so to be loaded for it to function. #<module name="m_httpd_stats.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ident: Provides RFC 1413 ident lookup support # When this module is loaded <connect:allow> tags may have an optional # useident="yes|no" boolean value, determining whether or not to lookup # ident on users matching that connect tag. #<module name="m_ident.so"> # #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you are using the m_ident.so module, then you can # # specify the timeout for ident lookups here. If not defined, it will # # default to one second. This is a non-blocking timeout which holds # # the user in a 'connecting' state until the lookup is complete. # # The bind value indicates which IP to bind outbound requests to. # # # #<ident timeout="5"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invite except module: Adds support for channel invite exceptions (+I) #<module name="m_inviteexception.so"> # Does a +I bypass channel +k in addition to +i? #<inviteexception bypasskey="yes"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # IRCv3 module: Provides the following IRCv3.1 extensions: # extended-join, away-notify and account-notify. These are optional # enhancements to the client-to-server protocol. An extension is only # active for a client when the client specifically requests it, so this # module needs m_cap to work. # # Further information on these extensions can be found at the IRCv3 # working group website: # http://ircv3.atheme.org/extensions/ # #<module name="m_ircv3.so"> # The following block can be used to control which extensions are # enabled. #<ircv3 accoutnotify="on" awaynotify="on" extendedjoin="on"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Join flood module: Adds support for join flood protection (+j) #<module name="m_joinflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Jump Server module: Adds support for the RPL_REDIR numeric # This module is oper-only. # To use, JUMPSERVER must be in one of your oper class blocks. # If your server is redirecting new clients and you get disconnected, # do a REHASH from shell to open up again. #<module name="m_jumpserver.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) #<module name="m_kicknorejoin.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Knock module: adds the /KNOCK command and +K channel mode #<module name="m_knock.so"> # This setting specifes what to do when someone successfully /KNOCKs. # If set to "notice", then a NOTICE will be sent to the channel. # This is the default and the compatible setting, as it requires no # special support from the clients. # If set to "numeric" then a 710 numeric will be sent to the channel. # This allows easier scripting but not all clients support it. # If set to "both" then (surprise!) both will be sent. #<knock notify="notice"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LDAP authentication module: Adds the ability to authenticate users # # via LDAP. This is an extra module which must be enabled explicitly # # by symlinking it from modules/extra, and requires the OpenLDAP libs # # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ldapauth.cpp # and run make install, then uncomment this module to enable it. # # # #<module name="m_ldapauth.so"> # # # # Configuration: # # # # <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" # # attribute="uid" # # server="ldap://brainwave.brainbox.cc" # # allowpattern="Guest*" # # killreason="Access denied" # # searchscope="subtree" # # binddn="cn=Manager,dc=brainbox,dc=cc" # # bindauth="mysecretpass" # # verbose="yes"> # # # # <ldapwhitelist cidr="10.42.0.0/16"> # # # # <ldaprequire attribute="attr" value="val"> # # # # The baserdn indicates the base DN to search in for users. Usually # # this is 'ou=People,dc=yourdomain,dc=yourtld'. # # # # The attribute value indicates the attribute which is used to locate # # a user account by name. On POSIX systems this is usually 'uid'. # # # # The server parameter indicates the LDAP server to connect to. The # # ldap:// style scheme before the hostname proper is MANDITORY. # # # # The allowpattern value allows you to specify a wildcard mask which # # will always be allowed to connect regardless of if they have an # # account, for example guest users. # # # # Killreason indicates the QUIT reason to give to users if they fail # # to authenticate. # # # # The searchscope value indicates the subtree to search under. On our # # test system this is 'subtree'. Your mileage may vary. # # # # Setting the verbose value causes an oper notice to be sent out for # # every failed authentication to the server, with an error string. # # # # The binddn and bindauth indicate the DN to bind to for searching, # # and the password for the distinguished name. Some LDAP servers will # # allow anonymous searching in which case these two values do not # # need defining, otherwise they should be set similar to the examples # # above. # # # # ldapwhitelist indicates that clients connecting from an IP in the # # provided CIDR do not need to authenticate against LDAP. It can be # # repeated to whitelist multiple CIDRs. # # # # ldaprequire allows further filtering on the LDAP user, by requiring # # certain LDAP attibutes to have a given value. It can be repeated, # # in which case the list will act as an OR list, that is, the # # authentication will succeed if any of the requirements in the list # # is satisfied. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LDAP oper configuration module: Adds the ability to authenticate # # opers via LDAP. This is an extra module which must be enabled # # explicitly by symlinking it from modules/extra, and requires the # # OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp # and run make install, then uncomment this module to enable it. # # # #<module name="m_ldapoper.so"> # # # Configuration: # # # # <ldapoper baserdn="ou=People,dc=brainbox,dc=cc" # server="ldap://brainwave.brainbox.cc" # searchscope="subtree" # binddn="cn=Manager,dc=brainbox,dc=cc" # bindauth="mysecretpass"> # # # Available configuration items are identical to the same items in # # m_ldapauth above. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # # used to temporarily close/open for new connections to the server. # # These commands require OPER status and that the LOCKSERV UNLOCKSERV # # are specified in a <class> tag that the oper is part of. This is so # # you can control who has access to this possible dangerous command. # # If your server is locked and you get disconnected, do a REHASH from # # shell to open up again. # # This module is oper-only. # #<module name="m_lockserv.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Map hiding module: replaces /MAP and /LINKS output to users with a # # message to see a website, set by maphide="http://link.to/site" in # # the security tag, instead. # #<module name="m_maphide.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Msg flood module: Adds message/notice flood protection (+f) #<module name="m_messageflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MLOCK module: Adds support for server-side enforcement of services # side MLOCKs. Basically, this module suppresses any mode change that # would likely be immediately bounced by services. #<module name="m_mlock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MsSQL module: Allows other SQL modules to access MS SQL Server # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mssql.cpp # and run make install, then uncomment this module to enable it. # #<module name="m_mssql.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mssql.so is more complex than described here, see wiki for more # # info http://wiki.inspircd.org/Modules/mssql # # #<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MySQL module: Allows other SQL modules to access MySQL databases # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mysql.cpp # and run make install, then uncomment this module to enable it. # #<module name="m_mysql.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mysql.so is more complex than described here, see the wiki for # # more: http://wiki.inspircd.org/Modules/mysql # # #<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Named Modes module: This module allows for the display and set/unset # of channel settings and modes via long-form mode names in channels with # channelmode +Z set. For example, to set a channelban with named modes: # /mode #channel +Z ban=foo!bar@baz . Currently this doesn't serve much # purpose outside of making channel administration a bit easier in some # cases, but eventually modules will start using named modes only because # we're running out of channelmodes. :D #<module name="m_namedmodes.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # NAMESX module: Provides support for the NAMESX extension which allows # clients to see all the prefixes set on a user without getting confused. # This is supported by mIRC, x-chat, klient, and maybe more. #<module name="m_namesx.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # National characters module: # 1) Allows using national characters in nicknames. # 2) Allows using custom (national) casemapping over the network. # file -- filename of existing file in "locales" directory # casemapping -- custom value for 005 numeric (if you want it to be # different from the filename. # #<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink"> #<module name="m_nationalchars.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nickchange flood protection module: Allows up to X nick changes in Y seconds. # Provides channel mode +F. #<module name="m_nickflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that # user from changing their nick again. # This module is oper-only. # To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks. #<module name="m_nicklock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No ctcp module: Adds the channel mode +C to block CTCPs and extban C # to block CTCPs sent by specific users. #<module name="m_noctcp.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode and the Q: extban to deny # certain users from kicking. #<module name="m_nokicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No nicks module: Adds the +N channel mode, as well as the +b N: # extended bantype. +N stops all users from changing their nick, # the +b N: extban stops anyone from matching a +b N:nick!user@host # mask from changing their nick. #<module name="m_nonicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No part message module: adds extban 'p' to block part messages from # # matching users. # #<module name="m_nopartmsg.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No Notice module: adds the channel mode +T and the extban T to block # specific users from noticing the channel. #<module name="m_nonotice.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Network buisness join module # Allows an oper to join a channel using /OJOIN, giving them +Y on the # channel which makes them immune to kick/deop/etc. #<module name="m_ojoin.so"> # #<ojoin prefix="!" notice="yes" op="yes"> # Specify the prefix that +Y will grant here # Leave prefix empty if you do not wish +Y to grant a prefix # If notice is set to on, upon ojoin, the server will notice # the channel saying that the oper is joining on network business # If op is set to on, it will give them +o along with +Y #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper channels mode: Adds the +O channel mode and +beI type O:<mask> # to ban, exempt, and invex given oper type masks. # e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you # may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins. # +be work in a similar fashion. # #<module name="m_operchans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper Join module: Auto-joins opers to a channel upon oper-up # This module is oper-only. For the user equivalent, see m_conn_join. #<module name="m_operjoin.so"> # #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_operjoin.so module, specify options here: # # # # channel - The channel name to join, can also be a comma # # seperated list eg. "#channel1,#channel2". # # # # override - Lets the oper join walking thru any modes that # # might be set, even bans. Use "yes" or "no". # # # #<operjoin channel="#channel" override="no"> # # Alternatively you can use the autojoin="channellist" in a <type> # # tag to set specific autojoins for a type of oper, for example: # # #<type name="Helper" autojoin="#help" classes="..."> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper log module: Logs all oper commands to the ircd log at default # loglevel, and optionally to the 'r' SNOMASK. # This module is oper-only. #<module name="m_operlog.so"> # # If the following option is on then all oper commands will be sent to # the snomask 'r'. The default is off. #<operlog tosnomask="off"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper prefixing module: Gives IRC operators a prefix status character # on all channels they are in. # #<module name="m_operprefix.so"> # # You may additionally customise the prefix character. #<operprefix prefix="!"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MOTD module: Provides support for seperate message of the day # on oper-up # This module is oper-only. #<module name="m_opermotd.so"> # #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_opermotd.so module, specify the motd here # # # # onoper - Should the message be sent on /OPER or only when # # /OPERMOTD is used. Use "yes" or "no". # # # # processcolors - Allow color codes to be processed in the opermotd. # # Read the comment above <connect:allowmotdcolors> in # # inspircd.conf.example for details. # # # #<opermotd file="conf/oper.motd" onoper="yes" processcolors="false"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override # This module is oper-only. #<module name="m_override.so"> # #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # m_override.so is too complex it describe here, see the wiki: # # http://wiki.inspircd.org/Modules/override # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper levels module: Gives each oper a level and prevents # actions being taken against higher level opers # Specify the level as the 'level' parameter of the <type> tag # # This module is oper-only. #<module name="m_operlevels.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper modes module: Allows you to specify modes to add/remove on oper # Specify the modes as the 'modes' parameter of the <type> tag # and/or as the 'modes' parameter of the <oper> tag. # This module is oper-only. For the user equivalent, see m_conn_umodes #<module name="m_opermodes.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Password forwarding module: Forwards a password users can send on connect # to the specified client below. The client is usually nickserv and this # module is usually used to authenticate users with nickserv using their # connect password. #<module name="m_passforward.so"> <passforward # nick: nick to forward connect passwords to. nick="NickServ" # forwardmsg: Message to send to users using a connect password. # $nick will be the users' nick, $nickrequired will be the nick # of where the password is going (the nick above). # You can also use $user for the user ident string. forwardmsg="NOTICE $nick :*** Forwarding PASS to $nickrequired" # cmd: Command for the nick to run when it recieves a connect # password. cmd="PRIVMSG $nickrequired :IDENTIFY $pass"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Password hash module: Allows hashed passwords to be used. # To be useful, a hashing module like m_sha256.so also needs to be loaded. # #<module name="m_password_hash.so"> # #-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# # # To use this module, you must define a hash type for each oper's # password you want to hash. For example: # # <oper name="Brain" # host="ident@dialup15.isp.com" # hash="sha256" # password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b" # type="NetAdmin"> # # Starting from 2.0, you can use a more secure salted hash that prevents simply # looking up the hash's value in a rainbow table built for the hash. # hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg" # # Generate hashes using the /MKPASSWD command on the server. Don't run it on a # server you don't trust with your password. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Permanent Channels module: Channels with the permanent channels mode # will remain open even after everyone else has left the channel, and # therefore keep things like modes, ban lists and topic. Permanent # channels -may- need support from your Services package to function # properly with them. This adds channel mode +P. # This module is oper-only. #<module name="m_permchannels.so"> # # If you like, m_permchannels can write a config file of permanent channels # whenever +P is set, unset, or the topic/modes on a +P channel is changed. # If you want to do this, set the filename below, and uncomment the include. # #<permchanneldb filename="data/permchannels.conf"> #<include file="data/permchannels.conf"> # # You may also create channels on startup by using the <permchannels> block. # Don't forget to set them +P in the modes, or they won't stay permanent. #<permchannels channel="#opers" modes="isP" topic="Opers only."> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # PostgreSQL module: Allows other SQL modules to access PgSQL databases # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_pgsql.cpp # and run make install, then uncomment this module to enable it. # #<module name="m_pgsql.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_pgsql.so is more complex than described here, see the wiki for # # more: http://wiki.inspircd.org/Modules/pgsql # # #<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Muteban: Implements extended ban m:, which stops anyone matching # a mask like +b m:nick!user@host from speaking on channel. #<module name="m_muteban.so"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random Quote module: provides a random quote on connect. # NOTE: Some of these may mimic fatal errors and confuse users and # opers alike! - BEWARE! #<module name="m_randquote.so"> # #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_randquote.so module, then # # specify below the path to the randquotes.conf file. # # # #<randquote file="randquotes.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Redirect module: Adds channel redirection (mode +L) # # Optional: <redirect:antiredirect> to add usermode +L to stop forced # # redirection and instead print an error. # # # # Note: You can not update this with a simple rehash, it requires # # reloading the module for it to take effect. # # This also breaks linking to servers that do not have the option. # # This defaults to false for the 2.0 version, it will be enabled in # # all the future versions. # #<module name="m_redirect.so"> #<redirect antiredirect="true"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular Expression Provider for Glob or wildcard (?/*) matching. # You must have at least 1 provider loaded to use m_filter or m_rline # modules. This module has no additional requirements, as it uses the # matching already present in InspIRCd core. #<module name="m_regex_glob.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular Expression Provider for PCRE (Perl-Compatible Regular # Expressions). You need libpcre installed to compile and load this # module. You must have at least 1 provider loaded to use m_filter or # m_rline. #<module name="m_regex_pcre.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular Expression Provider for POSIX Regular Expressions. # You shouldn't need any additional libraries on a POSIX-compatible # system (ie: any Linux, BSD, but not Windows). You must have at least # 1 provider loaded to use m_filter or m_rline. # On POSIX-compliant systems, regex syntax can be found by using the # command: 'man 7 regex'. #<module name="m_regex_posix.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular Expression Provider for C++11 std::regex Regular Expressions. # This module works on any fully compliant implementation of the C++11 # std::regex container. Examples for such are Visual C++ 2010 and newer # but not libstdc++ (which GCC uses) # You should verify that std::regex is supported by your setup before # using this module, as it may compile normally but won't do anything # on some implementations. #<module name="m_regex_stdlib.so"> # Specify the Regular Expression engine to use here. Valid settings are # bre, ere, awk, grep, egrep, ecmascript (default if not specified) #<stdregex type="ecmascript"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular Expression Provider for TRE Regular Expressions. # This is the same regular expression engine used by UnrealIRCd, so # if you are most familiar with the syntax of /spamfilter from there, # this is the provider you want. You need libtre installed in order # to compile and load this module. #<module name="m_regex_tre.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Registered users only channel creation # Allows only registered users and opers to create new channels. # # You probably *DO NOT* want to load this module on a public network. # #<module name="m_regonlycreate.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK #<module name="m_remove.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restricted channels module: Allows only opers to create channels. # # You probably *DO NOT* want to load this module on a public network. # #<module name="m_restrictchans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers. # # You probably *DO NOT* want to load this module on a public network. # #<module name="m_restrictmsg.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban users through regular expression patterns #<module name="m_rline.so"> # #-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # If you wish to re-check a user when they change nickname (can be # useful under some situations, but *can* also use CPU with more users # on a server) then set the following configuration value: # Also, this is where you set what Regular Expression engine is to be # used. If you ever change it while running, all of your R-Lines will be # wiped. This is the regex engine used by all R-Lines set, and # m_regex_<engine>.so must be loaded, or rline will be nonfunctional # until you load it or change the engine to one that is loaded. # #<rline matchonnickchange="yes" engine="pcre"> # # Generally, you will NOT want to use 'glob' here, as this turns # rline into just another gline. The exceptions are that rline will # always use the full nick!user@host realname string, rather than only # user@host, but beware that only the ? and * wildcards are available, # and are the only way to specify where the space can occur if you do # use glob. For this reason, is recommended to use a real regex engine # so that at least \s or [[:space:]] is available. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAJOIN module: Adds the /SAJOIN command # This module is oper-only. # To use, SAJOIN must be in one of your oper class blocks. #<module name="m_sajoin.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAKICK module: Adds the /SAKICK command # This module is oper-only. # To use, SAKICK must be in one of your oper class blocks. #<module name="m_sakick.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAMODE module: Adds the oper /SAMODE command # This module is oper-only. # To use, SAMODE must be in one of your oper class blocks. #<module name="m_samode.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SANICK module: Allows opers to change user's nicks # This module is oper-only. # To use, SANICK must be in one of your oper class blocks. #<module name="m_sanick.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAPART module: Adds the oper /SAPART command # This module is oper-only. # To use, SAPART must be in one of your oper class blocks. #<module name="m_sapart.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) # This module is oper-only. # To use, SAQUIT must be in one of your oper class blocks. #<module name="m_saquit.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SATOPIC module: Adds the oper /SATOPIC command # This module is oper-only. # To use, SATOPIC must be in one of your oper class blocks. #<module name="m_satopic.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SASL authentication module: Provides support for IRC Authentication # Layer (aka: atheme SASL) via AUTHENTICATE. #<module name="m_sasl.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Secure list module: Prevent /LIST in the first minute of connection, # crippling most spambots and trojan spreader bots. #<module name="m_securelist.so"> # #-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Securelist can be harmful to some irc search engines such as # # netsplit.de and searchirc.com. To prevent securelist blocking these # # sites from listing, define exception tags as shown below: # <securehost exception="*@*.searchirc.org"> <securehost exception="*@*.netsplit.de"> <securehost exception="*@echo940.server4you.de"> <securehost exception="*@*.ircdriven.com"> # # # Define the following variable to change how long a user must wait # # before issuing a LIST. If not defined, defaults to 60 seconds. # # # #<securelist waittime="60"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Servprotect module: Provides support for Austhex style +k / # UnrealIRCD +S services mode #<module name="m_servprotect.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # See nicks module: Allow for SNOMASK +N which shows nick changes. # This module is oper-only. #<module name="m_seenicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Set Idle module: Adds a command for opers to change their # idle time (mainly a toy) # This module is oper-only. # To use, SETIDLE must be in one of your oper class blocks. #<module name="m_setidle.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via account names (AC) # and is similar in operation to the way asuka and ircu handle services. # # At the same time, this offers +r for users and channels to mark them # as identified seperately from the idea of a master account, which # can be useful for services which are heavily nick-as-account centric. # # This replaces m_services from 1.1 and earlier. # # Also of note is that this module implements three extbans: # +b R: (stop matching account names from joining) # +b M: (stop matching account names from speaking) # +b U:n!u@h (blocks matching unregistered users) # #<module name="m_services_account.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Sethost module: Adds the /SETHOST command # This module is oper-only. # To use, SETHOST must be in one of your oper class blocks. # See m_chghost for how to customise valid chars for hostnames #<module name="m_sethost.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Setident module: Adds the /SETIDENT command # This module is oper-only. # To use, SETIDENT must be in one of your oper class blocks. #<module name="m_setident.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SETNAME module: Adds the /SETNAME command # This module is oper-only. # To use, SETNAME must be in one of your oper class blocks. #<module name="m_setname.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Serverban: Implements extended ban s:, which stops anyone connected # to a server matching a mask like +b s:server.mask.here from joining. #<module name="m_serverban.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Show Whois module: Adds the +W usermode which allows opers # to see when they are whois'ed (can be annoying). # This module is oper-only. #<module name="m_showwhois.so"> # # If you wish, you may also let users set this mode. Only opers with the # users/auspex priv will see real hosts of people, though. This setting # is not reloadable via /rehash, and will require /reloadmodule, as # it directly affects the mode object itself. #<showwhois opersonly="yes" # # You may also set whether or not users should recieve whois notices, should # they be /whois'd by an oper. # showfromopers="yes"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Shun module: Provides the /SHUN command, which stops a user from # executing all except configured commands. # This module is oper-only. # To use, SHUN must be in one of your oper class blocks. #<module name="m_shun.so"> # # You may also configure which commands you wish a user to be able to # perform. It should be noted that if a shunned user issues QUIT or PART # then their message will be removed, as if they did not issue one. # # You can (optionally) let the user know that their command was blocked. # # You may also let SHUN affect opers (defaults to no). #<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL channel mode module: Adds support for SSL-only channels (+z). # does not do anything useful without a working SSL module (see below) #<module name="m_sslmodes.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, # if enabled. You must copy the source for this module from the directory # src/modules/extra, or answer 'yes' in ./configure when asked if you # want to enable this, or it will not load. #<module name="m_ssl_gnutls.so"> # #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_gnutls.so is too complex it describe here, see the wiki: # # http://wiki.inspircd.org/Modules/ssl_gnutls # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL Info module: Allows users to retrieve information about other # user's peer SSL certificates and keys. This can be used by client # scripts to validate users. For this to work, one of m_ssl_gnutls.so # or m_ssl_openssl.so must be loaded. This module also adds the # "* <user> is using a secure connection" whois line, the ability for # opers to use SSL fingerprints to verify their identity and the ability # to force opers to use SSL connections in order to oper up. # It is highly recommended to load this module especially if # you use SSL on your network. # For how to use the oper features, please see the first example <oper> tag # in opers.conf.example. # #<module name="m_sslinfo.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL, # if enabled. You must copy the source for this module from the directory # src/modules/extra, or answer 'yes' in ./configure when asked if you # want to enable this, or it will not load. #<module name="m_ssl_openssl.so"> # #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_openssl.so is too complex it describe here, see the wiki: # # http://wiki.inspircd.org/Modules/ssl_openssl # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Strip color module: Adds the channel mode +S #<module name="m_stripcolor.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SILENCE module: Adds support for /SILENCE #<module name="m_silence.so"> # # Configuration tags: # #<silence maxentries="32"> # # Sets the maximum number of entries on a users silence list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQLite3 module: Allows other SQL modules to access SQLite3 # # databases through a unified API. You must link the source for this # # module from the directory src/modules/extra to src/modules, plus # # the file m_sqlv2.h # # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_aqlite.cpp # and run make install, then uncomment this module to enable it. # # #<module name="m_sqlite3.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlite.so is more complex than described here, see the wiki for # # more: http://wiki.inspircd.org/Modules/sqlite3 # # #<database module="sqlite" hostname="/full/path/to/database.db" id="anytext"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL authentication module: Allows IRCd connections to be tied into # a database table (for example a forum). You must copy the source for # this module from the directory src/modules/extra # Depends on the SQLutils module being loaded first. # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlauth.cpp # and run make install, then uncomment this module to enable it. # #<module name="m_sqlauth.so"> # #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlauth.so is too complex it describe here, see the wiki: # # http://wiki.inspircd.org/Modules/sqlauth # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL oper module: Allows you to store oper credentials in an SQL table # You must copy the source for this module from the directory src/modules/extra # Depends on the SQLutils module being loaded first. # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqloper.cpp # and run make install, then uncomment this module to enable it. # #<module name="m_sqloper.so"> # #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see m_sql) # # hash - Hashing provider to use for password hashing # # # # See also: http://wiki.inspircd.org/Modules/sqloper # # # #<sqloper dbid="1" hash="md5"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # # added/removed by Services. # #<module name="m_svshold.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SWHOIS module: Allows you to add arbitary lines to user WHOIS. # This module is oper-only. # To use, SWHOIS must be in one of your oper class blocks. #<module name="m_swhois.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test module: enable this to create a command useful in testing # flood control. To avoid accidental use on live networks, the server # name must contain ".test" to load the module #<module name="m_testnet.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Timed bans module: Adds timed channel bans and the /TBAN command #<module name="m_timedbans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test line module: Adds the /TLINE command, used to test how many # users a /GLINE or /ZLINE etc would match. # This module is oper-only. # To use, TLINE must be in one of your oper class blocks. #<module name="m_tline.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Topiclock module: implements server-side topic locking to achieve deeper # integration with services packages. #<module name="m_topiclock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # UHNAMES support module: Adds support for the IRCX style UHNAMES # extension, which displays ident and hostname in the names list for # each user, saving clients from doing a WHO on the channel. Note that # this module is not widely supported yet. If a client does not support # UHNAMES it will not enable it, this will not break incompatible # clients. #<module name="m_uhnames.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Uninvite module: Adds the /UNINVITE command which lets users remove # pending invites from channels without waiting for the user to join. #<module name="m_uninvite.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Userip module: Adds the /USERIP command # This module is oper-only. # To use, USERIP must be in one of your oper class blocks. #<module name="m_userip.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Vhost module: Adds the VHOST command which allows for adding virtual # hosts which are accessible using a username and password in the config. #<module name="m_vhost.so"> # #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # user - Username for the vhost. # # # # pass - Password for the vhost. # # # # hash - The hash for the specific user (optional) # # m_password_hash.so and a hashing module must be loaded # # for this to work. # # # # host - Vhost to set. # # #<vhost user="some_username" pass="some_password" host="some.host"> #<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Watch module: Adds the WATCH command, which is used by clients to # maintain notify lists. #<module name="m_watch.so"> # # Configuration tags: # #<watch maxentries="32"> # # Sets the maximum number of entries on a user's watch list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) # in a file "xline.db" which can be re-loaded on restart. This is useful # for two reasons: it keeps bans so users may not evade them, and on # bigger networks, server connections will take less time as there will # be a lot less bans to apply - as most of them will already be there. #<module name="m_xline_db.so"> # Specify the filename for the xline database here #<xlinedb filename="data/xline.db"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # To link servers to InspIRCd, you MUST load the m_spanningtree # # module. If you don't do this, server links will NOT work at all. # # This is by design, to allow for the implementation of other linking # # protocols in modules in the future. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spanning Tree module - allows linking of servers using the spanning # tree protocol (see the READ THIS BIT section above). # You will almost always want to load this. # #<module name="m_spanningtree.so">