#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # These tags define which modules will be loaded on startup by your # # server. Add modules without any paths. When you make your ircd # # using the 'make' command, all compiled modules will be moved into # # the folder you specified when you ran ./configure. The module tag # # automatically looks for modules in this location. # # If you attempt to load a module outside of this location, either # # in the config, or via /LOADMODULE, you will receive an error. # # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # # http://www.inspircd.org/wiki/Modules_List for a list of modules and# # each modules link for any additional conf tags they require. # # # # You may use wildcards in a tag to load all modules which # # match a glob pattern (e.g. m_sa????.so would load m_sajoin, # # m_sapart, m_saquit and m_sanick) # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # To link servers to InspIRCd, you MUST load the m_spanningtree # # module, as shown below. If you DO NOT do this, server links will # # NOT work at all. ie. The ports will NOT bind, and /connect will not # # work properly. This is by design, to allow for the implementation # # of other linking protocols in modules in the future. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spanning Tree module - allows linking of servers using the spanning # tree protocol (see the READ THIS BIT section above). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MD5 Module - Allows other modules to generate MD5 hashes, usually for # cryptographic uses and security. # # IMPORTANT: # Other modules such as m_cloaking.so and m_password_hash.so may rely on # this module being loaded to function. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 Module - Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules such as m_password_hash.so may rely on this module being # loaded to function. Certain modules such as m_spanningtree.so will # function without this module but when it is loaded their features will # be enhanced (for example the addition of HMAC authentication). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules may rely on this module being loaded to function. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Abbreviation module: Provides the ability to abbreviate commands a-la # BBC BASIC keywords. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alias module: Allows you to define server-side command aliases # # #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_alias.so module loaded, you may also define # # aliases as shown below. They are commonly used to provide shortcut # # commands to services, however they are not limited to just this use.# # An alias tag requires the following values to be defined in it: # # # # text - The text to detect as the actual command line, # # Cant contain spaces, but case insensitive. # # You may have multiple aliases with the same # # command name (text="" value), however the first # # found will be executed if its format value is # # matched, or it has no format value. Aliases are # # read from the top of the file to the bottom. # # # # format - If this is defined, the parameters of the alias # # must match this glob pattern. For example if you # # want the first parameter to start with a # for # # the alias to be executed, set format="#*" in the # # alias definition. Note that the :'s which are # # part of IRC formatted lines will be preserved # # for matching of this text. This value is # # optional. # # # # replace - The text to replace 'text' with. Usually this # # will be "PRIVMSG ServiceName :$2-" or similar. # # You may use the variables $1 through $9 in the # # replace string, which refer to the first through # # ninth word in the original string typed by the # # user. You may also use $1- through $9- which # # refer to the first word onwards, through to the # # ninth word onwards, e.g. if the user types the # # command "foo bar baz qux quz" then $3- will hold # # "baz qux quz" and $2 will contain "bar". You may # # also use the special variables: $nick, $ident, # # $host and $vhost, and you may separate multiple # # commands with \n. If you wish to use the ACTUAL # # characters \ and n together in a line, you must # # use the sequence "\\n". # # # # requires - If you provide a value for 'requires' this means # # the given nickname MUST be online for the alias # # to successfully trigger. If they are not, then # # the user receives a 'no such nick' 401 numeric. # # # # uline - Defining this value with 'yes', 'true' or '1' # # will ensure that the user given in 'requires' # # must also be on a u-lined server, as well as # # actually being on the network. If the user is # # online, but not on a u-lined server, then an # # oper-alert is sent out as this is possibly signs # # of a user trying to impersonate a service. # # # # operonly - Defining this value, with a value of 'yes', '1' # # or true will make the alias oper only. If a non- # # oper attempts to use the alias, it will appear # # to not exist. # # # # # # # # # # # An example of using the format value to create an alias with two # different behaviours depending on the format of the parameters. # # # # # # This alias fixes a glitch in xchat 2.6.x and above and the way it # assumes IDENTIFY must be prefixed by a colon (:) character. It should # be placed ABOVE the default NICKSERV alias (the first example) listed # above. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alltime module: Shows time on all connected servers at once # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Antibear security module: Prevents 'bear.txt' based trojans from # connecting to your network by sending them a numeric they can't handle. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Antibottler module: Labels bottler leech bots # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Auditorium module: Adds channel mode +u which makes everyone else # except you in the channel invisible, used for large meetings etc. # # # Auditorium settings: # # # # showops: # Setting this value to yes makes m_auditorium behave like unrealircd # +u channel mode, e.g. ops see users joining, parting, etc, and users # joining the channel see the ops. Without this flag, the mode acts # like ircnet's +a (anonymous channels), showing only the user in the # names list, and not even showing the ops in the list, or showing the # ops that the user has joined. # operoverride: # Setting this value to yes makes m_auditorium affect the userlist for # regular users only. Opers will view all users in the channel normally. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban except module: Adds support for channel ban exceptions (+e) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban redirection module: Allows bans which redirect to a specified # channel. e.g. +b nick!ident@host#channelbanneduserissentto # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block amsg module: Attempt to block all usage of /amsg and /ame # # #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_blockamsg.so module loaded, you can configure it # # with the tag: # # # # delay - How many seconds between two messages to force # # them to be recognised as unrelated. # # action - Any of 'notice', 'noticeopers', 'silent', 'kill' # # or 'killopers'. Define how to take action when # # a user uses /amsg or /ame. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block CAPS module: Blocking all-CAPS messages with cmode +B # # # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # percent - How many percent of text must be caps before text # # will be blocked. # # # # minlen - The minimum length a line must be for the block # # percent to have any effect. # # # # capsmap - A list of chars to be considered CAPS, this was # # you can add CAPS for your language. Also you can # # add things like ! and space to further lock down # # on caps usage. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block colour module: Blocking colour-coded messages with cmode +c # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Botmode module: Adds the user mode +B # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CallerID module: Adds usermode +g which activates hybrid-style # callerid (== block all private messages unless you /accept first) # # #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # maxaccepts - Maximum number of entires a user can add to his # # /accept list. Default is 16 entries. # # operoverride - Can opers (note: ALL opers) ignore callerid mode? # # Default is no. # # tracknick - Preserve /accept entries when a user changes nick? # # If no (the default), the user is removed from # # everyone's accept list if he changes nickname. # # cooldown - Amount of time (in seconds) that must pass since # # the last notification sent to a user before he can # # be sent another. Default is 60 (1 minute). # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CBAN module: Lets you disallow channels from being used at runtime. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Censor module: Adds the channel mode +G # # #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_censor module, then you must # # specify some censor tags. See also: # # http://www.inspircd.org/wiki/Censor_Module # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CGI:IRC module: Adds support for automatic host changing in CGI:IRC # (http://cgiirc.sourceforge.net). # # #-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # # Optional - If you specify to use m_cgiirc, then you must specify one # or more cgihost tags which indicate authorised CGI:IRC servers which # will be connecting to your network, and an optional cgiirc tag. # For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module # # Set to yes if you want to notice opers when CGI clients connect # # # The type field indicates where the module should get the real # client's IP address from, for further information, please see the # CGI:IRC documentation. # # Old style: # # Get IP from PASS # # Get IP from ident # # See the docs # New style: # # Get IP from WEBIRC # # IMPORTANT NOTE: # --------------- # # When you connect CGI:IRC clients, there are two connect classes which # apply to these clients. When the client initially connects, the connect # class which matches the cgi:irc site's host is checked. Therefore you # must raise the maximum local/global clients for this ip as high as you # want to allow cgi clients. After the client has connected and is # determined to be a cgi:irc client, the class which matches the client's # real IP is then checked. You may set this class to a lower value, so that # the real IP of the client can still be restricted to, for example, 3 # sessions maximum. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel create module: Adds snomask +j, which will notify opers of # any new channels that are created # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel filter module: Allows channel-op defined message # filtering using simple string matches (channel mode +g) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Chanprotect module: gives +q and +a channel modes # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Check module: gives /check # Check is useful for looking up information on channels, # users, IP addresses and hosts. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGHOST module: Adds the /CHGHOST command # # #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# # Optional - If you want to use special chars for hostnames you can # # specify your own custom list of chars with the tag: # # # # charmap - A list of chars accepted as valid by the /CHGHOST # # and /SETHOST commands. Also note that the list is # # case-sensitive. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGIDENT module: Adds the /CHGIDENT command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGNAME module: Adds the /CHGNAME command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support. # Relies on the module m_md5.so being loaded before m_cloaking.so in # the configuration file. # # #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify the m_cloaking.so module as above, you # # must define cloak keys, and optionally a cloak prefix as shown # # below. When using cloaking, the cloak keys are MANDITORY and must # # be included. However, if prefix is not included, it will default # # to your networks name from the tag. You can also include # # the following optional values: # # # # ipalways - Always cloak the IP address, not the hostname, # # which doesn't reveal the user's ISP, but # # results in hosts that are harder to read and # # ban. # # # # lowercase - Display the cloaked hostnames in lowercase # # characters instead of uppercase # # # # # # # # Please note that the key values will accept any number, and should # # be large numbers. Using small numbers such as "7" or "1924" will # # seriously weaken the security of your cloak. It is recommended you # # use hexdecimal numbers prefixed by "0x", as shown in this example, # # with each key eight hex digits long. # #-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Close module: Allows an oper to close all unregistered connections. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Clones module: Adds an oper command /CLONES for detecting cloned # users. Warning: This module may be resource intensive when its # command is issued, use with care. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Common channels module: Adds user mode +c, which, when set, requires # that users must share a common channel with you to PRIVMSG or NOTICE # you. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Join: Allows you to force users to join one or more channels # automatically upon connecting to the server. # # #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # If you have m_conn_join.so loaded, you can configure it using the # follow values: # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Usermodes: Set modes on users when they connect # When this module is loaded tags may have an optional # modes="" value, which contains modes to add or remove from users # when they connect to the server. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Wait-for-Pong: Don't let a user connect until they PONG # # #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_conn_waitpong.so module loaded, configure it with # # the tag: # # # # sendsnotice - Whether to send a snotice on connect, like other # # older ircds # # # # killonbadreply - Whether to kill the user if they send the wrong # # PONG reply. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel cycle module. Server side /hop, with +ilk etc bypass. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connectban: Provides IP connection throttling. Any IP range that connects # too many times (configurable) in an hour is zlined for a (configurable) # duration, and their count resets to 0. # # ipv4cidr and ipv6cidr allow you to turn the comparison from individual # IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling # over whole ISPs/blocks of IPs, which may be needed to prevent attacks. # # # This allows for 10 quits in an hour with a 10 minute ban if that is exceeded. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connection throttle module. Configuration: # # #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # seconds, maxconns - Amount of connections per . # # timeout - Time to wait after the throttle was activated # before deactivating it. Be aware that the time # is seconds + timeout. # # quitmsg - The message that users get if they attempt to # connect while the throttle is active. # # bootwait - Amount of time to wait before enforcing the # throttling when the server just booted. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Custom title module: Adds the /TITLE command which allows for trusted # users to gain a custom whois line and a optional # vhost can be specified. # # #-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # name - The username used to identify # password - The password used to identify # host - Allowed hostmask [optional] # title - Title shown in whois # vhost - Displayed host [optional] # # #<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DCCALLOW module: Adds the /DCCALLOW command #<module name="m_dccallow.so"> # #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # blockchat - Whether to block DCC CHAT as well as DCC SEND # length - Default duration of entries in DCCALLOW list # action - Default action to take if no action is specified # can be 'block' or 'allow' # # File configuration: # pattern - The glob pattern to match against # action - Action to take if a user attempts to send a file # that matches this pattern, can be 'block' or 'allow' # #<dccallow blockchat="yes" length="5m" action="block"> #<banfile pattern="*.exe" action="block"> #<banfile pattern="*.txt" action="allow"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deaf module: adds support for ircu style usermode +d - deaf to # channel messages and channel notices. #<module name="m_deaf.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Delay join module: Adds the channel mode +D which delays all JOIN # messages from users until they speak. If they quit or part before # speaking, their quit or part message will not be shown to the channel # which helps cut down noise on large channels in a more friendly way # than the auditorium mode. Only channel ops may set the +D mode. #<module name="m_delayjoin.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deny Channels: Deny Channels from being used by users #<module name="m_denychans.so"> # #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_denychans.so module loaded, you need to specify # # the channels to deny: # # # # name - The channel name to deny. (glob masks are ok) # # # # allowopers - If operators are allowed to override the deny. # # # # reason - Reason given for the deny. # # # # redirect - Redirect the user to a different channel # # # #<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> # #<badchan name="#heaven" redirect="#hell" reason="Nice try!"> # # # # Redirects will not work if the target channel is set +L. # # # # Additionally, you may specify channels which are allowed, even if # # a badchan tag specifies it would be denied: # #<goodchan name="#godsleeps"> # # Glob masks are accepted here also. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Devoice Module: Let users devoice themselves. #<module name="m_devoice.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DNS Blacklist Module: Provides support for looking up IPs on one or # # more blacklists. # #<module name="m_dnsbl.so"> # # # # For configuration options please see the wiki page for m_dnsbl at # # http://inspircd.org/wiki/DNS_Blacklist_Module # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Filter module: Provides glob-based message filtering #<module name="m_filter.so"> # OR # PCRE filter module: Filters messages using regular expressions #<module name="m_filter_pcre.so"> # # You may only use one or the other with these modules, network-wide. # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_filter or m_filter_pcre # # modules, then specfiy below the path to the filter.conf file, # # or define some <filter> tags. # # # #<include file="filter.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Foobar module: does nothing - historical relic #<module name="m_foobar.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GeoIP module: Allows the server admin to ban users by country code. #<module name="m_geoip.so"> # #-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # # # <geoip banunknown="false"> # # # # Set this value to true or yes to block unknown IP ranges which are # # not in the database (usually LAN addresses, localhost, etc) # # # # <geoban country="TR" reason="This country not permitted"> # # # # Use one or more of these tags to ban countries by country code. # # The country code must be in capitals and should be an ISO country # # code such as TR, GB, or US. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Globops module: gives /GLOBOPS and usermode +g #<module name="m_globops.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Global load module: Allows loading and unloading of modules network- # wide (USE WITH EXTREME CAUTION!) #<module name="m_globalload.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command #<module name="m_helpop.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_helpop.so module, then # # specify below the path to the helpop.conf file, or if you like to # # make a mess, define your helpop tags in this conf. # # # #<include file="helpop.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HIDECHANS module: Allows opers to hide their channels list from non- # opers by setting user mode +I on themselves. # <module name="m_hidechans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HIDEOPER module: Allows opers to hide their oper status from non- # opers by setting user mode +H on themselves. # <module name="m_hideoper.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hostchange module: Allows a different style of cloaking #<module name="m_hostchange.so"> # #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Optional - If you choose to use the m_hostchange.so module. # # Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # # # #<host suffix="polarbears.org" separator="." prefix=""> #<hostchange mask="*@fbi.gov" action="addnick"> #<hostchange mask="*r00t@*" action="suffix"> #<hostchange mask="a@b.com" action="set" value="blah.blah.blah"> #<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # httpd module: Provides http server support for InspIRCd #<module name="m_httpd.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # Optional - If you choose to use the m_httpd.so module, then you must # specify the port number and other details of your http server: # #<http ip="192.168.1.10" host="brainwave" port="32006" # index="/home/brain/inspircd/http/index.html"> # # You may have as many of these tags as you wish, each with a different # IP, port, host or index file. Each one will act as an independent # HTTP server. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http ACL module: Provides access control lists for m_httpd dependent # modules. Use this module to restrict pages by IP address and by # password. # #<module name="m_httpd_acl.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # Restrict access to the m_httpd_stats module to all but the local # network and when the correct password is specified: # # <httpdacl path="/stats*" types="password,whitelist" # username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*"> # # Deny all connections to all but the main index page: # # <httpdacl path="/*" types="blacklist" blacklist="*"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http config module: Allows the server's configuration to be viewed # over HTTP. Requires m_httpd.so to be loaded for it to function. #<module name="m_httpd_config.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http stats module: Provides basic stats pages over HTTP # Requires m_httpd.so to be loaded for it to function. #<module name="m_httpd_stats.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # #<httpstats stylesheet="http://remote.style/sheet.css"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ident: Provides RFC 1413 ident lookup support #<module name="m_ident.so"> # #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you are using the m_ident.so module, then you can # # specify the timeout for ident lookups here. If not defined, it will # # default to one second. This is a non-blocking timeout which holds # # the user in a 'connecting' state until the lookup is complete. # # The bind value indicates which IP to bind outbound requests to. # # # #<ident timeout="5" bind=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invite except module: Adds support for channel invite exceptions (+I) #<module name="m_inviteexception.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invisible module - Adds support for usermode +Q (quiet) which lets an # oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that # opers are still able to see invisible users, and if an oper with +Q # deopers, they will become visible. # # IMPORTANT NOTE: To allow this mode to be used by a type of oper, you # must first add the value canquiet="yes" to that oper's type tag. # #<module name="m_invisible.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Join flood module: Adds support for join flood protection (+j) #<module name="m_joinflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Jump Server module: Adds support for the RPL_REDIR numeric #<module name="m_jumpserver.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) #<module name="m_kicknorejoin.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Knock module: adds the /KNOCK command and +K channel mode #<module name="m_knock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LDAP authentication module: Adds the ability to authenticate users # # via LDAP. This is an extra module which must be enabled explicitly # # by symlinking it from modules/extra, and requires the OpenLDAP libs # # # #<module name="m_ldapauth.so"> # # # # Configuration: # # # # <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" # # attribute="uid" # # server="ldap://brainwave.brainbox.cc" # # allowpattern="Guest*" # # killreason="Access denied" # # searchscope="subtree" # # binddn="cn=Manager,dc=brainbox,dc=cc" # # bindauth="mysecretpass" # # verbose="yes"> # # # # The baserdn indicates the base DN to search in for users. Usually # # this is 'ou=People,dc=yourdomain,dc=yourtld'. # # # # The attribute value indicates the attribute which is used to locate # # a user account by name. On POSIX systems this is usually 'uid'. # # # # The server parameter indicates the LDAP server to connect to. The # # ldap:// style scheme before the hostname proper is MANDITORY. # # # # The allowpattern value allows you to specify a wildcard mask which # # will always be allowed to connect regardless of if they have an # # account, for example guest users. # # # # Killreason indicates the QUIT reason to give to users if they fail # # to authenticate. # # # # The searchscope value indicates the subtree to search under. On our # # test system this is 'subtree'. Your mileage may vary. # # # # Setting the verbose value causes an oper notice to be sent out for # # every failed authentication to the server, with an error string. # # # # The binddn and bindauth indicate the DN to bind to for searching, # # and the password for the distinguished name. Some LDAP servers will # # allow anonymous searching in which case these two values do not # # need defining, otherwise they should be set similar to the examples # # above. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # # used to temporarily close/open for new connections to the server. # # These commands require OPER status and that the LOCKSERV UNLOCKSERV # # are specified in a <class> tag that the oper is part of. This is so # # you can control who has access to this possible dangerous command. # # If your server is locked and you got disconnected, do a REHASH from # # shell to open up again. #<module name="m_lockserv.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Msg flood module: Adds message/notice flood protection (+f) #<module name="m_messageflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MsSQL module: Allows other SQL modules to access MS SQL Server # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h #<module name="m_mssql.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mssql.so is more complex than described here, see wiki for more # # info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module # # #<database name="db" username="user" password="pass" hostname="localhost" id="db1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MySQL module: Allows other SQL modules to access MySQL databases # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h #<module name="m_mysql.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mysql.so is more complex than described here, see the wiki for # # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # # #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # NAMESX module: Provides support for the NAMESX extension which allows # clients to see all the prefixes set on a user without getting confused. # This is supported by mIRC, x-chat, klient, and maybe more. #<module name="m_namesx.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nickban: Implements extended ban n:, which stops anyone matching # a mask like +b n:nick!user@host from changing their nick on channel. #<module name="m_nickban.so"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nickchange flood protection module: Allows up to X nick changes in Y seconds. # Provides channel mode +F. #<module name="m_nickflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that # user from changing their nick again. #<module name="m_nicklock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No ctcp module: Adds the channel mode +C to block CTCPs #<module name="m_noctcp.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Noinvite module: Gives channel mode +V #<module name="m_noinvite.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode #<module name="m_nokicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No nicks module: Adds the +N channel mode #<module name="m_nonicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No Notice module: adds the channel mode +T #<module name="m_nonotice.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper channels mode: Adds the +O channel mode #<module name="m_operchans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper flood module: Removes flood limits from users upon opering up #<module name="m_operflood.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper Join module: Auto-joins opers to a channel upon oper-up #<module name="m_operjoin.so"> # #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_operjoin.so module, specify options here: # # # # channel - The channel name to join, can also be a comma # # seperated list eg. "#channel1,#channel2". # # # # override - Lets the oper join walking thru any modes that # # might be set, even bans. Use "yes" or "no". # # # #<operjoin channel="#channel" override="no"> # # Alternatively you can use the autojoin="channellist" in a <type> # # tag to set specific autojoins for a type of oper, for example: # # #<type name="Helper" autojoin="#help" classes="..."> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper log module: Logs all oper commands to the ircd log at default # loglevel. #<module name="m_operlog.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MOTD module: Provides support for seperate message of the day # on oper-up #<module name="m_opermotd.so"> # #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_opermotd.so module, specify the motd here # # # #<opermotd file="oper.motd"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override #<module name="m_override.so"> # #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # m_override.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/Oper_Override_Module # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper levels module: Gives each oper a level and prevents # actions being taken against higher level opers # Specify the level as the 'level' parameter of the <type> tag #<module name="m_operlevels.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper modes module: Allows you to specify modes to add/remove on oper # Specify the modes as the 'modes' parameter of the <type> tag # and/or as the 'modes' parameter of the <oper> tag. #<module name="m_opermodes.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper password hash module: Allows hashed oper passwords # Relies on the module m_md5.so and/or m_sha256.so being loaded before # m_password_hash.so in the configuration file. #<module name="m_password_hash.so"> # #-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # # To use this module, you must define a hash type for each oper's # password you want to hash. For example: # # <oper name="Brain" # host="ident@dialup15.isp.com" # hash="sha256" # password="a41d730937a53b79f788c0ab13e9e1d5" # type="NetAdmin"> # # The types of hashing available vary depending on which hashing modules # you load, but usually if you load m_sha256.so and m_md5.so, both md5 # and sha256 type hashing will be available (the most secure of which # is SHA256). #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Permanent Channels module: Channels with the permanent channels mode # will remain open even after everyone else has left the channel, and # therefore keep things like modes, ban lists and topic. Permanent # channels -may- need support from your Services package to function # properly with them. This adds channel mode +P. #<module name="m_permchannels.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # PostgreSQL module: Allows other SQL modules to access PgSQL databases # through a unified API. You must copy the source for this module # from the directory src/modules/extra, plus the file m_sqlv2.h #<module name="m_pgsql.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_pgsql.so is more complex than described here, see the wiki for # # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # # #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Proxy scan module: Scans locally connecting clients for proxies. #<module name="m_proxyscan.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Quietban: Implements extended ban q:, which stops anyone matching # a mask like +b q:nick!user@host from speaking on channel. #<module name="m_quietban.so"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random Quote module: provides a random quote on connect. # NOTE: Some of these may mimic fatal errors and confuse users and # opers alike! - BEWARE! #<module name="m_randquote.so"> # #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_randquote.so module, then # # specify below the path to the randquotes.conf file. # # # #<randquote file="randquotes.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Redirect module: Adds channel redirection (mode +L) #<module name="m_redirect.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Registered users only channel creation # Allows only registered users and opers to create new channels. #<module name="m_regonlycreate.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK #<module name="m_remove.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict banned users module: # Disallows banned users on a channel from messaging the channel, # changing nick, or changing the topic, if loaded. #<module name="m_restrictbanned.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restricted channels module: Allows only opers to create channels #<module name="m_restrictchans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers #<module name="m_restrictmsg.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban users through regular expression patterns #<module name="m_rline.so"> # #-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # If you wish to re-check a user when they change nickname (can be # useful under some situations, but *can* also use CPU with more users # on a server) then set the following configuration value: #<rline matchonnickchange="yes"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # JSON-RPC module: Encode and decode JSON-RPC requests for modules #<module name="m_rpc_json.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # RPC test module: A test of the RPC API #<module name="m_rpctest.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Provide /LIST throttling (to prevent flooding) and /LIST safety to # prevent excess flood when the list is large. #<module name="m_safelist.so"> # #-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # When using Safelist, you may set the following values; # # The first value, 'throttle', sets the amount of time in seconds a user # must wait between LIST commands. For example, if this is set to 60 # (the default) then the user may not /LIST more than once a minute. # If not defined, the default value is 60 seconds. # # The second value, 'maxlisters', indicates the maximum number of users # which may be retrieving a LIST at once. It is not recommended you raise # this value, as increasing it too high can make your network vulnerable # to floodbots which waste your bandwidth and CPU time with LIST requests. # #<safelist throttle="60" maxlisters="50"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAJOIN module: Adds the /SAJOIN command #<module name="m_sajoin.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAMODE module: Adds the oper /SAMODE command #<module name="m_samode.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SANICK module: Allows opers to change user's nicks #<module name="m_sanick.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAPART module: Adds the oper /SAPART command #<module name="m_sapart.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) #<module name="m_saquit.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SASL authentication module: Provides support for IRC Authentication # Layer (aka: atheme SASL) via AUTHENTICATE. #<module name="m_sasl.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Secure list module: Prevent /LIST in the first minute of connection, # crippling most spambots and trojan spreader bots. #<module name="m_securelist.so"> # #-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Securelist can be harmful to some irc search engines such as # # netsplit.de and searchirc.com. To prevent securelist blocking these # # sites from listing, define exception tags as shown below: # <securehost exception="*@*.searchirc.org"> <securehost exception="*@*.netsplit.de"> <securehost exception="*@echo940.server4you.de"> # # # Define the following variable to change how long a user must wait # # before issuing a LIST. If not defined, defaults to 60 seconds. # # # #<securelist waittime="60"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Servprotect module: Provides support for Austhex style +k / # UnrealIRCD +S services mode #<module name="m_servprotect.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # See nicks module: Allow for SNOMASK +N which shows nick changes. #<module name="m_seenicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Set Idle module: Adds a command for opers to change their # idle time (mainly a toy) #<module name="m_setidle.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via user mode +r, which # is similar to the DALnet and dreamforge systems. # # N O T E!! # >> This CAN NOT be used at the same time as m_services_account << # N O T E!! #<module name="m_services.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via account names (AC) # and is similar in operation to the way asuka and ircu handle services. # # N O T E!! # >> This CAN NOT be used at the same time as m_services << # N O T E!! #<module name="m_services_account.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Sethost module: Adds the /SETHOST command # See m_chghost for how to customise valid chars for hostnames #<module name="m_sethost.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Setident module: Adds the /SETIDENT command #<module name="m_setident.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SETNAME module: Adds the /SETNAME command #<module name="m_setname.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Show Whois module: Adds the +W usermode which allows opers # to see when they are whois'ed (can be annoying). #<module name="m_showwhois.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Shun module: Provides the /shun command, which stops a user executing # all commands except PING and PONG. #<module name="m_shun.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spy module: Provides the ability to see the complete names list of # channels an oper is not a member of #<module name="m_spy.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL channel mode module: Adds support for SSL-only channels (+z). # does not do anything useful without a working SSL module (see below) #<module name="m_sslmodes.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Dummy ssl module: If you have other servers on your network which # have SSL, but your server does not have ssl enabled, you should load # this module, which will handle SSL metadata (e.g. the "Is using ssl" # field in the WHOIS information). #<module name="m_ssl_dummy.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, # if enabled. You must copy the source for this module from the directory # src/modules/extra, or answer 'yes' in ./configure when asked if you # want to enable this, or it will not load. #<module name="m_ssl_gnutls.so"> # #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_gnutls.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/GnuTLS_SSL_Module # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL Info module: Allows users to retrieve information about other # user's peer SSL certificates and keys. This can be used by client # scripts to validate users. For this to work, one of m_ssl_gnutls.so # or m_ssl_openssl.so must be loaded. You must symlink the source for # this module from the directory src/modules/extra. #<module name="m_sslinfo.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL, # if enabled. You must copy the source for this module from the directory # src/modules/extra, or answer 'yes' in ./configure when asked if you # want to enable this, or it will not load. #<module name="m_ssl_openssl.so"> # #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_openssl.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/OpenSSL_SSL_Module # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL Cert Oper module: Allows opers to oper up using the key fingerprint # stored within their SSL certificate and key pair. # When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must # be loaded. An extra value should be added to enabled opers, which # is in the following format: fingerprint="<hash>". For more information, # see the example in the oper blocks. #<module name="m_ssl_oper_cert.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Strip colour module: Adds the channel mode +S #<module name="m_stripcolor.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SILENCE module: Adds support for /SILENCE #<module name="m_silence.so"> # # Configuration tags: # #<silence maxentries="32"> # # Sets the maximum number of entries on a users silence list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQLite3 module: Allows other SQL modules to access SQLite3 # # databases through a unified API. You must link the source for this # # module from the directory src/modules/extra to src/modules, plus # # the file m_sqlv2.h # #<module name="m_sqlite3.so"> # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlite.so is more complex than described here, see the wiki for # # more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module # # #<database hostname="/full/path/to/database.db" id="anytext"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQLutils module: Provides some utilities to SQL client modules, such # as mapping queries to users and channels. You must copy the source # for this module from the directory src/modules/extra/m_sqlutils.cpp # and src/modules/extra/m_sqlutils.h into /src/modules # Needed for, and loaded before: SQLauth and SQLoper #<module name="m_sqlutils.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL authentication module: Allows IRCd connections to be tied into # a database table (for example a forum). You must copy the source for # this module from the directory src/modules/extra # Depends on the SQLutils module being loaded first. #<module name="m_sqlauth.so"> # #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlauth.so is too complex it describe here, see the wiki: # # http://www.inspircd.org/wiki/SQL_Authentication_Module # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL logging module: Allows you to log network-wide data for your # network in a fully normalised set of SQL tables. You must copy the # source for this module from the directory src/modules/extra #<module name="m_sqllog.so"> # #-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see m_sql) # # # # See also: http://www.inspircd.org/wiki/SQL_Logging_Module # # # #<sqllog dbid="1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL oper module: Allows you to store oper credentials in an SQL table # You must copy the source for this module from the directory src/modules/extra # Depends on the SQLutils module being loaded first. #<module name="m_sqloper.so"> # #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see m_sql) # # hash - Hashing provider to use for password hashing # # # # See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module # # # #<sqloper dbid="1" hash="md5"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # # added/removed by Services. # #<module name="m_svshold.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SWHOIS module: Allows you to add arbitary lines to user WHOIS. #<module name="m_swhois.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Taxonomy module: Adds the /TAXONOMY command, used to view all # metadata attached to a user. #<module name="m_taxonomy.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test command module: Does nothing significant. Read: pointless. #<module name="m_testcommand.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Timed bans module: Adds timed bans and the /TBAN command #<module name="m_timedbans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test line module: Adds the /TLINE command, used to test how many # users a /GLINE or /ZLINE etc would match. #<module name="m_tline.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # UHNAMES support module: Adds support for the IRCX style UHNAMES # extension, which displays ident and hostname in the names list for # each user, saving clients from doing a WHO on the channel. Note that # this module is not widely supported yet. If a client does not support # UHNAMES it will not enable it, this will not break incompatible # clients. #<module name="m_uhnames.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Uninvite module: Adds the /UNINVITE command which lets users remove # pending invites from channels without waiting for the user to join. #<module name="m_uninvite.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Userip module: Adds the /USERIP command #<module name="m_userip.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Vhost module: Adds the VHOST command which allows for adding virtual # hosts which are accessible using a username and password in the config. #<module name="m_vhost.so"> # #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # user - Username for the vhost. # # # # pass - Password for the vhost. # # # # host - Vhost to set. # # #<vhost user="some_username" pass="some_password" host="some.host"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Watch module: Adds the WATCH command, which is used by clients to # maintain notify lists. #<module name="m_watch.so"> # # Configuration tags: # #<watch maxentries="32"> # # Sets the maximum number of entries on a user's watch list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) # in a file "xline.db" which can be re-loaded on restart. This is useful # for two reasons: it keeps bans so users may not evade them, and on # bigger networks, server connections will take less time as there will # be a lot less bans to apply - as most of them will already be there. #<module name="m_xline_db.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # XMLSocket module: Adds support for connections using the shockwave # flash XMLSocket. Note that this does not work if the client you are # using has retarded ideas of the IRC protocol. Your client must still # send RFC-correct lines to the server, this module only changes the # line ending from newlines to null terminators. # #<module name="m_xmlsocket.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # ZipLinks module: Adds support for zlib deflate on server to server # connections. Both ends of the connection must load this module. # #<module name="m_ziplink.so"> # # To use this module, you must enable it as a transport type in your # <link> tags or <bind> tags using the transport name 'zip'. # See the documentation of <link> and <bind>, respectively. #