From c0cf560ec2b00f5829a7a40d9c3011cfc845bad6 Mon Sep 17 00:00:00 2001 From: w00t Date: Sat, 12 Jul 2008 10:24:19 +0000 Subject: Split example conf into example conf and modules conf, include modules conf from the main example. This should provide a slightly less heavy introduction to things. git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@9970 e03df62e-2008-0410-955e-edbf42e46eb7 --- conf/inspircd.conf.example | 1453 +------------------------------------------- 1 file changed, 14 insertions(+), 1439 deletions(-) (limited to 'conf/inspircd.conf.example') diff --git a/conf/inspircd.conf.example b/conf/inspircd.conf.example index 32e36ba4a..fa32053d9 100644 --- a/conf/inspircd.conf.example +++ b/conf/inspircd.conf.example @@ -1150,1445 +1150,6 @@ # maxgroups="100000" # # maxkeep="3d"> # - -#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# These tags define which modules will be loaded on startup by your # -# server. Add modules without any paths. When you make your ircd # -# using the 'make' command, all compiled modules will be moved into # -# the folder you specified when you ran ./configure. The module tag # -# automatically looks for modules in this location. # -# If you attempt to load a module outside of this location, either # -# in the config, or via /LOADMODULE, you will receive an error. # -# # -# By default, ALL modules are commented out. You must uncomment them # -# or add lines to your config to load modules. Please refer to # -# http://www.inspircd.org/wiki/Modules_List for a list of modules and# -# each modules link for any additional conf tags they require. # -# # -# You may use wildcards in a tag to load all modules which # -# match a glob pattern (e.g. m_sa????.so would load m_sajoin, # -# m_sapart, m_saquit and m_sanick) # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# To link servers to InspIRCd, you MUST load the m_spanningtree # -# module, as shown below. If you DO NOT do this, server links will # -# NOT work at all. ie. The ports will NOT bind, and /connect will not # -# work properly. This is by design, to allow for the implementation # -# of other linking protocols in modules in the future. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Spanning Tree module - allows linking of servers using the spanning -# tree protocol (see the READ THIS BIT section above). -# -# - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MD5 Module - Allows other modules to generate MD5 hashes, usually for -# cryptographic uses and security. -# -# IMPORTANT: -# Other modules such as m_cloaking.so and m_password_hash.so may rely on -# this module being loaded to function. -# -# -# -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SHA256 Module - Allows other modules to generate SHA256 hashes, -# usually for cryptographic uses and security. -# -# IMPORTANT: -# Other modules such as m_password_hash.so may rely on this module being -# loaded to function. Certain modules such as m_spanningtree.so will -# function without this module but when it is loaded their features will -# be enhanced (for example the addition of HMAC authentication). -# -# -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes, -# usually for cryptographic uses and security. -# -# IMPORTANT: -# Other modules may rely on this module being loaded to function. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Abbreviation module: Provides the ability to abbreviate commands a-la -# BBC BASIC keywords. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alias module: Allows you to define server-side command aliases -# -# -#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_alias.so module loaded, you may also define # -# aliases as shown below. They are commonly used to provide shortcut # -# commands to services, however they are not limited to just this use.# -# An alias tag requires the following values to be defined in it: # -# # -# text - The text to detect as the actual command line, # -# Cant contain spaces, but case insensitive. # -# You may have multiple aliases with the same # -# command name (text="" value), however the first # -# found will be executed if its format value is # -# matched, or it has no format value. Aliases are # -# read from the top of the file to the bottom. # -# # -# format - If this is defined, the parameters of the alias # -# must match this glob pattern. For example if you # -# want the first parameter to start with a # for # -# the alias to be executed, set format="#*" in the # -# alias definition. Note that the :'s which are # -# part of IRC formatted lines will be preserved # -# for matching of this text. This value is # -# optional. # -# # -# replace - The text to replace 'text' with. Usually this # -# will be "PRIVMSG ServiceName :$2-" or similar. # -# You may use the variables $1 through $9 in the # -# replace string, which refer to the first through # -# ninth word in the original string typed by the # -# user. You may also use $1- through $9- which # -# refer to the first word onwards, through to the # -# ninth word onwards, e.g. if the user types the # -# command "foo bar baz qux quz" then $3- will hold # -# "baz qux quz" and $2 will contain "bar". You may # -# also use the special variables: $nick, $ident, # -# $host and $vhost, and you may separate multiple # -# commands with \n. If you wish to use the ACTUAL # -# characters \ and n together in a line, you must # -# use the sequence "\\n". # -# # -# requires - If you provide a value for 'requires' this means # -# the given nickname MUST be online for the alias # -# to successfully trigger. If they are not, then # -# the user receives a 'no such nick' 401 numeric. # -# # -# uline - Defining this value with 'yes', 'true' or '1' # -# will ensure that the user given in 'requires' # -# must also be on a u-lined server, as well as # -# actually being on the network. If the user is # -# online, but not on a u-lined server, then an # -# oper-alert is sent out as this is possibly signs # -# of a user trying to impersonate a service. # -# # -# operonly - Defining this value, with a value of 'yes', '1' # -# or true will make the alias oper only. If a non- # -# oper attempts to use the alias, it will appear # -# to not exist. # -# # -# -# -# -# -# -# -# -# An example of using the format value to create an alias with two -# different behaviours depending on the format of the parameters. -# -# -# -# -# -# This alias fixes a glitch in xchat 2.6.x and above and the way it -# assumes IDENTIFY must be prefixed by a colon (:) character. It should -# be placed ABOVE the default NICKSERV alias (the first example) listed -# above. -# -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alltime module: Shows time on all connected servers at once -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibear security module: Prevents 'bear.txt' based trojans from -# connecting to your network by sending them a numeric they can't handle. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibottler module: Labels bottler leech bots -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Auditorium module: Adds channel mode +u which makes everyone else -# except you in the channel invisible, used for large meetings etc. -# -# -# Auditorium settings: -# -# -# -# showops: -# Setting this value to yes makes m_auditorium behave like unrealircd -# +u channel mode, e.g. ops see users joining, parting, etc, and users -# joining the channel see the ops. Without this flag, the mode acts -# like ircnet's +a (anonymous channels), showing only the user in the -# names list, and not even showing the ops in the list, or showing the -# ops that the user has joined. -# operoverride: -# Setting this value to yes makes m_auditorium affect the userlist for -# regular users only. Opers will view all users in the channel normally. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban except module: Adds support for channel ban exceptions (+e) -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban redirection module: Allows bans which redirect to a specified -# channel. e.g. +b nick!ident@host#channelbanneduserissentto -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block amsg module: Attempt to block all usage of /amsg and /ame -# -# -#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_blockamsg.so module loaded, you can configure it # -# with the tag: # -# # -# delay - How many seconds between two messages to force # -# them to be recognised as unrelated. # -# action - Any of 'notice', 'noticeopers', 'silent', 'kill' # -# or 'killopers'. Define how to take action when # -# a user uses /amsg or /ame. # -# -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block CAPS module: Blocking all-CAPS messages with cmode +B -# -# # -#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# percent - How many percent of text must be caps before text # -# will be blocked. # -# # -# minlen - The minimum length a line must be for the block # -# percent to have any effect. # -# # -# capsmap - A list of chars to be considered CAPS, this was # -# you can add CAPS for your language. Also you can # -# add things like ! and space to further lock down # -# on caps usage. # -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block colour module: Blocking colour-coded messages with cmode +c -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Botmode module: Adds the user mode +B -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CallerID module: Adds usermode +g which activates hybrid-style -# callerid (== block all private messages unless you /accept first) -# -# -#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# maxaccepts - Maximum number of entires a user can add to his # -# /accept list. Default is 16 entries. # -# operoverride - Can opers (note: ALL opers) ignore callerid mode? # -# Default is no. # -# tracknick - Preserve /accept entries when a user changes nick? # -# If no (the default), the user is removed from # -# everyone's accept list if he changes nickname. # -# cooldown - Amount of time (in seconds) that must pass since # -# the last notification sent to a user before he can # -# be sent another. Default is 60 (1 minute). # -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CBAN module: Lets you disallow channels from being used at runtime. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Censor module: Adds the channel mode +G -# -# -#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_censor module, then you must # -# specify some censor tags. See also: # -# http://www.inspircd.org/wiki/Censor_Module # -# -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CGI:IRC module: Adds support for automatic host changing in CGI:IRC -# (http://cgiirc.sourceforge.net). -# -# -#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# -# Optional - If you specify to use m_cgiirc, then you must specify one -# or more cgihost tags which indicate authorised CGI:IRC servers which -# will be connecting to your network, and an optional cgiirc tag. -# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module -# -# Set to yes if you want to notice opers when CGI clients connect -# -# -# The type field indicates where the module should get the real -# client's IP address from, for further information, please see the -# CGI:IRC documentation. -# -# Old style: -# # Get IP from PASS -# # Get IP from ident -# # See the docs -# New style: -# # Get IP from WEBIRC -# -# IMPORTANT NOTE: -# --------------- -# -# When you connect CGI:IRC clients, there are two connect classes which -# apply to these clients. When the client initially connects, the connect -# class which matches the cgi:irc site's host is checked. Therefore you -# must raise the maximum local/global clients for this ip as high as you -# want to allow cgi clients. After the client has connected and is -# determined to be a cgi:irc client, the class which matches the client's -# real IP is then checked. You may set this class to a lower value, so that -# the real IP of the client can still be restricted to, for example, 3 -# sessions maximum. -# - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel create module: Adds snomask +j, which will notify opers of -# any new channels that are created -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel filter module: Allows channel-op defined message -# filtering using simple string matches (channel mode +g) -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Chanprotect module: gives +q and +a channel modes -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Check module: gives /check -# Check is useful for looking up information on channels, -# users, IP addresses and hosts. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGHOST module: Adds the /CHGHOST command -# -# -#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# -# Optional - If you want to use special chars for hostnames you can # -# specify your own custom list of chars with the tag: # -# # -# charmap - A list of chars accepted as valid by the /CHGHOST # -# and /SETHOST commands. Also note that the list is # -# case-sensitive. # -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGIDENT module: Adds the /CHGIDENT command -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGNAME module: Adds the /CHGNAME command -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Cloaking module: Adds usermode +x and cloaking support. -# Relies on the module m_md5.so being loaded before m_cloaking.so in -# the configuration file. -# -# -#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify the m_cloaking.so module as above, you # -# must define cloak keys, and optionally a cloak prefix as shown # -# below. When using cloaking, the cloak keys are MANDITORY and must # -# be included. However, if prefix is not included, it will default # -# to your networks name from the tag. You can also include # -# the following optional values: # -# # -# ipalways - Always cloak the IP address, not the hostname, # -# which doesn't reveal the user's ISP, but # -# results in hosts that are harder to read and # -# ban. # -# # -# lowercase - Display the cloaked hostnames in lowercase # -# characters instead of uppercase # -# # -# # -# # -# Please note that the key values will accept any number, and should # -# be large numbers. Using small numbers such as "7" or "1924" will # -# seriously weaken the security of your cloak. It is recommended you # -# use hexdecimal numbers prefixed by "0x", as shown in this example, # -# with each key eight hex digits long. # - -#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Close module: Allows an oper to close all unregistered connections. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Clones module: Adds an oper command /CLONES for detecting cloned -# users. Warning: This module may be resource intensive when its -# command is issued, use with care. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Common channels module: Adds user mode +c, which, when set, requires -# that users must share a common channel with you to PRIVMSG or NOTICE -# you. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Join: Allows you to force users to join one or more channels -# automatically upon connecting to the server. -# -# -#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# -# If you have m_conn_join.so loaded, you can configure it using the -# follow values: -# -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Usermodes: Set modes on users when they connect -# When this module is loaded tags may have an optional -# modes="" value, which contains modes to add or remove from users -# when they connect to the server. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Wait-for-Pong: Don't let a user connect until they PONG -# -# -#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_conn_waitpong.so module loaded, configure it with # -# the tag: # -# # -# sendsnotice - Whether to send a snotice on connect, like other # -# older ircds # -# # -# killonbadreply - Whether to kill the user if they send the wrong # -# PONG reply. # -# # -# - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel cycle module. Server side /hop, with +ilk etc bypass. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Connectban: Provides per-IP connection throttling. Any IP that disconnects -# too many times (configurable) in an hour is zlined for a (configurable) -# duration, and their count resets to 0. -# -# NOTE: This module may change name/behaviour later in 1.2. Please make sure -# you read release announcements! -# -# -# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded. -# -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Connection throttle module. Configuration: -# -# -#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# seconds, maxconns - Amount of connections per . -# -# timeout - Time to wait after the throttle was activated -# before deactivating it. Be aware that the time -# is seconds + timeout. -# -# quitmsg - The message that users get if they attempt to -# connect while the throttle is active. -# -# bootwait - Amount of time to wait before enforcing the -# throttling when the server just booted. -# -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Custom title module: Adds the /TITLE command which allows for trusted -# users to gain a custom whois line and a optional -# vhost can be specified. -# -# -#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# name - The username used to identify -# password - The password used to identify -# host - Allowed hostmask [optional] -# title - Title shown in whois -# vhost - Displayed host [optional] -# -# -#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# DCCALLOW module: Adds the /DCCALLOW command -#<module name="m_dccallow.so"> -# -#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# blockchat - Whether to block DCC CHAT as well as DCC SEND -# length - Default duration of entries in DCCALLOW list -# action - Default action to take if no action is specified -# can be 'block' or 'allow' -# -# File configuration: -# pattern - The glob pattern to match against -# action - Action to take if a user attempts to send a file -# that matches this pattern, can be 'block' or 'allow' -# -#<dccallow blockchat="yes" length="5m" action="block"> -#<banfile pattern="*.exe" action="block"> -#<banfile pattern="*.txt" action="allow"> -# -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deaf module: adds support for ircu style usermode +d - deaf to -# channel messages and channel notices. -#<module name="m_deaf.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Delay join module: Adds the channel mode +D which delays all JOIN -# messages from users until they speak. If they quit or part before -# speaking, their quit or part message will not be shown to the channel -# which helps cut down noise on large channels in a more friendly way -# than the auditorium mode. Only channel ops may set the +D mode. -#<module name="m_delayjoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deny Channels: Deny Channels from being used by users -#<module name="m_denychans.so"> -# -#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_denychans.so module loaded, you need to specify # -# the channels to deny: # -# # -# name - The channel name to deny. (glob masks are ok) # -# # -# allowopers - If operators are allowed to override the deny. # -# # -# reason - Reason given for the deny. # -# # -# redirect - Redirect the user to a different channel # -# # -#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> # -#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> # -# # -# Redirects will not work if the target channel is set +L. # -# # -# Additionally, you may specify channels which are allowed, even if # -# a badchan tag specifies it would be denied: # -#<goodchan name="#godsleeps"> # -# Glob masks are accepted here also. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Devoice Module: Let users devoice themselves. -#<module name="m_devoice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# DNS Blacklist Module: Provides support for looking up IPs on one or # -# more blacklists. # -#<module name="m_dnsbl.so"> # -# # -# For configuration options please see the wiki page for m_dnsbl at # -# http://inspircd.org/wiki/DNS_Blacklist_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Filter module: Provides glob-based message filtering -#<module name="m_filter.so"> -# OR -# PCRE filter module: Filters messages using regular expressions -#<module name="m_filter_pcre.so"> -# -# You may only use one or the other with these modules, network-wide. -# -#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_filter or m_filter_pcre # -# modules, then specfiy below the path to the filter.conf file, # -# or define some <filter> tags. # -# # -#<include file="filter.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Foobar module: does nothing - historical relic -#<module name="m_foobar.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# GeoIP module: Allows the server admin to ban users by country code. -#<module name="m_geoip.so"> -# -#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# # -# <geoip banunknown="false"> # -# # -# Set this value to true or yes to block unknown IP ranges which are # -# not in the database (usually LAN addresses, localhost, etc) # -# # -# <geoban country="TR" reason="This country not permitted"> # -# # -# Use one or more of these tags to ban countries by country code. # -# The country code must be in capitals and should be an ISO country # -# code such as TR, GB, or US. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Globops module: gives /GLOBOPS and usermode +g -#<module name="m_globops.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Global load module: Allows loading and unloading of modules network- -# wide (USE WITH EXTREME CAUTION!) -#<module name="m_globalload.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HELPOP module: Provides the /HELPOP command -#<module name="m_helpop.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_helpop.so module, then # -# specify below the path to the helpop.conf file, or if you like to # -# make a mess, define your helpop tags in this conf. # -# # -#<include file="helpop.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HIDECHANS module: Allows opers to hide their channels list from non- -# opers by setting user mode +I on themselves. -# <module name="m_hidechans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HIDEOPER module: Allows opers to hide their oper status from non- -# opers by setting user mode +H on themselves. -# <module name="m_hideoper.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Hostchange module: Allows a different style of cloaking -#<module name="m_hostchange.so"> -# -#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you choose to use the m_hostchange.so module. # -# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # -# # -#<host suffix="polarbears.org" separator="." prefix=""> -#<hostchange mask="*@fbi.gov" action="addnick"> -#<hostchange mask="*r00t@*" action="suffix"> -#<hostchange mask="a@b.com" action="set" value="blah.blah.blah"> -#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# httpd module: Provides http server support for InspIRCd -#<module name="m_httpd.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# -# Optional - If you choose to use the m_httpd.so module, then you must -# specify the port number and other details of your http server: -# -#<http ip="192.168.1.10" host="brainwave" port="32006" -# index="/home/brain/inspircd/http/index.html"> -# -# You may have as many of these tags as you wish, each with a different -# IP, port, host or index file. Each one will act as an independent -# HTTP server. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# http ACL module: Provides access control lists for m_httpd dependent -# modules. Use this module to restrict pages by IP address and by -# password. -# -#<module name="m_httpd_acl.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# -# Restrict access to the m_httpd_stats module to all but the local -# network and when the correct password is specified: -# -# <httpdacl path="/stats*" types="password,whitelist" -# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*"> -# -# Deny all connections to all but the main index page: -# -# <httpdacl path="/*" types="blacklist" blacklist="*"> -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# http config module: Allows the server's configuration to be viewed -# over HTTP. Requires m_httpd.so to be loaded for it to function. -#<module name="m_httpd_config.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# http stats module: Provides basic stats pages over HTTP -# Requires m_httpd.so to be loaded for it to function. -#<module name="m_httpd_stats.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# -#<httpstats stylesheet="http://remote.style/sheet.css"> -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ident: Provides RFC 1413 ident lookup support -#<module name="m_ident.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you are using the m_ident.so module, then you can # -# specify the timeout for ident lookups here. If not defined, it will # -# default to one second. This is a non-blocking timeout which holds # -# the user in a 'connecting' state until the lookup is complete. # -# The bind value indicates which IP to bind outbound requests to. # -# # -#<ident timeout="5" bind=""> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Invite except module: Adds support for channel invite exceptions (+I) -#<module name="m_inviteexception.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Invisible module - Adds support for usermode +Q (quiet) which lets an -# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that -# opers are still able to see invisible users, and if an oper with +Q -# deopers, they will become visible. -# -# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you -# must first add the value canquiet="yes" to that oper's type tag. -# -#<module name="m_invisible.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Join flood module: Adds support for join flood protection (+j) -#<module name="m_joinflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Jump Server module: Adds support for the RPL_REDIR numeric -#<module name="m_jumpserver.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) -#<module name="m_kicknorejoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Knock module: adds the /KNOCK command and +K channel mode -#<module name="m_knock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# LDAP authentication module: Adds the ability to authenticate users # -# via LDAP. This is an extra module which must be enabled explicitly # -# by symlinking it from modules/extra, and requires the OpenLDAP libs # -# # -#<module name="m_ldapauth.so"> # -# # -# Configuration: # -# # -# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" # -# attribute="uid" # -# server="ldap://brainwave.brainbox.cc" # -# allowpattern="Guest*" # -# killreason="Access denied" # -# searchscope="subtree" # -# binddn="cn=Manager,dc=brainbox,dc=cc" # -# bindauth="mysecretpass" # -# verbose="yes"> # -# # -# The baserdn indicates the base DN to search in for users. Usually # -# this is 'ou=People,dc=yourdomain,dc=yourtld'. # -# # -# The attribute value indicates the attribute which is used to locate # -# a user account by name. On POSIX systems this is usually 'uid'. # -# # -# The server parameter indicates the LDAP server to connect to. The # -# ldap:// style scheme before the hostname proper is MANDITORY. # -# # -# The allowpattern value allows you to specify a wildcard mask which # -# will always be allowed to connect regardless of if they have an # -# account, for example guest users. # -# # -# Killreason indicates the QUIT reason to give to users if they fail # -# to authenticate. # -# # -# The searchscope value indicates the subtree to search under. On our # -# test system this is 'subtree'. Your mileage may vary. # -# # -# Setting the verbose value causes an oper notice to be sent out for # -# every failed authentication to the server, with an error string. # -# # -# The binddn and bindauth indicate the DN to bind to for searching, # -# and the password for the distinguished name. Some LDAP servers will # -# allow anonymous searching in which case these two values do not # -# need defining, otherwise they should be set similar to the examples # -# above. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # -# used to temporarily close/open for new connections to the server. # -# These commands require OPER status and that the LOCKSERV UNLOCKSERV # -# are specified in a <class> tag that the oper is part of. This is so # -# you can control who has access to this possible dangerous command. # -# If your server is locked and you got disconnected, do a REHASH from # -# shell to open up again. -#<module name="m_lockserv.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Msg flood module: Adds message/notice flood protection (+f) -#<module name="m_messageflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MsSQL module: Allows other SQL modules to access MS SQL Server -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra, plus the file m_sqlv2.h -#<module name="m_mssql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_mssql.so is more complex than described here, see wiki for more # -# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module # -# -#<database name="db" username="user" password="pass" hostname="localhost" id="db1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MySQL module: Allows other SQL modules to access MySQL databases -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra, plus the file m_sqlv2.h -#<module name="m_mysql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_mysql.so is more complex than described here, see the wiki for # -# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # -# -#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# NAMESX module: Provides support for the NAMESX extension which allows -# clients to see all the prefixes set on a user without getting confused. -# This is supported by mIRC, x-chat, klient, and maybe more. -#<module name="m_namesx.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nickban: Implements extended ban n:, which stops anyone matching -# a mask like +b n:nick!user@host from changing their nick on channel. -#<module name="m_nickban.so"> -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nickchange flood protection module: Allows up to X nick changes in Y seconds. -# Provides channel mode +F. -#<module name="m_nickflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nicklock module: Let opers change a user's nick and then stop that -# user from changing their nick again. -#<module name="m_nicklock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No ctcp module: Adds the channel mode +C to block CTCPs -#<module name="m_noctcp.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Noinvite module: Gives channel mode +V -#<module name="m_noinvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No kicks module: Adds the +Q channel mode -#<module name="m_nokicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No nicks module: Adds the +N channel mode -#<module name="m_nonicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No Notice module: adds the channel mode +T -#<module name="m_nonotice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper channels mode: Adds the +O channel mode -#<module name="m_operchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper flood module: Removes flood limits from users upon opering up -#<module name="m_operflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper Join module: Auto-joins opers to a channel upon oper-up -#<module name="m_operjoin.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you are using the m_operjoin.so module, specify options here: # -# # -# channel - The channel name to join, can also be a comma # -# seperated list eg. "#channel1,#channel2". # -# # -# override - Lets the oper join walking thru any modes that # -# might be set, even bans. Use "yes" or "no". # -# # -#<operjoin channel="#channel" override="no"> -# -# Alternatively you can use the autojoin="channellist" in a <type> # -# tag to set specific autojoins for a type of oper, for example: # -# -#<type name="Helper" autojoin="#help" classes="..."> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper log module: Logs all oper commands to the ircd log at default -# loglevel. -#<module name="m_operlog.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MOTD module: Provides support for seperate message of the day -# on oper-up -#<module name="m_opermotd.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you are using the m_opermotd.so module, specify the motd here # -# # -#<opermotd file="oper.motd"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Override module: Adds support for oper override -#<module name="m_override.so"> -# -#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# m_override.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/Oper_Override_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper levels module: Gives each oper a level and prevents -# actions being taken against higher level opers -# Specify the level as the 'level' parameter of the <type> tag -#<module name="m_operlevels.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper modes module: Allows you to specify modes to add/remove on oper -# Specify the modes as the 'modes' parameter of the <type> tag -# and/or as the 'modes' parameter of the <oper> tag. -#<module name="m_opermodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper password hash module: Allows hashed oper passwords -# Relies on the module m_md5.so and/or m_sha256.so being loaded before -# m_password_hash.so in the configuration file. -#<module name="m_password_hash.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# -# To use this module, you must define a hash type for each oper's -# password you want to hash. For example: -# -# <oper name="Brain" -# host="ident@dialup15.isp.com" -# hash="sha256" -# password="a41d730937a53b79f788c0ab13e9e1d5" -# type="NetAdmin"> -# -# The types of hashing available vary depending on which hashing modules -# you load, but usually if you load m_sha256.so and m_md5.so, both md5 -# and sha256 type hashing will be available (the most secure of which -# is SHA256). - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Permanent Channels module: Channels with the permanent channels mode -# will remain open even after everyone else has left the channel, and -# therefore keep things like modes, ban lists and topic. Permanent -# channels -may- need support from your Services package to function -# properly with them. This adds channel mode +P. -#<module name="m_permchannels.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# PostgreSQL module: Allows other SQL modules to access PgSQL databases -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra, plus the file m_sqlv2.h -#<module name="m_pgsql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_pgsql.so is more complex than described here, see the wiki for # -# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # -# -#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Proxy scan module: Scans locally connecting clients for proxies. -#<module name="m_proxyscan.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Quietban: Implements extended ban q:, which stops anyone matching -# a mask like +b q:nick!user@host from speaking on channel. -#<module name="m_quietban.so"> -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Random Quote module: provides a random quote on connect. -# NOTE: Some of these may mimic fatal errors and confuse users and -# opers alike! - BEWARE! -#<module name="m_randquote.so"> -# -#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_randquote.so module, then # -# specify below the path to the randquotes.conf file. # -# # -#<randquote file="randquotes.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Redirect module: Adds channel redirection (mode +L) -#<module name="m_redirect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Registered users only channel creation -# Allows only registered users and opers to create new channels. -#<module name="m_regonlycreate.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Remove module: Adds the /REMOVE command which is a peaceful -# alternative to /KICK -#<module name="m_remove.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict banned users module: -# Disallows banned users on a channel from messaging the channel, -# changing nick, or changing the topic, if loaded. -#<module name="m_restrictbanned.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels -#<module name="m_restrictchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict message module: Allows users to only message opers -#<module name="m_restrictmsg.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban users through regular expression patterns -#<module name="m_rline.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# If you wish to re-check a user when they change nickname (can be -# useful under some situations, but *can* also use CPU with more users -# on a server) then set the following configuration value: -#<rline matchonnickchange="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# JSON-RPC module: Encode and decode JSON-RPC requests for modules -#<module name="m_rpc_json.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# RPC test module: A test of the RPC API -#<module name="m_rpctest.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Provide /LIST throttling (to prevent flooding) and /LIST safety to -# prevent excess flood when the list is large. -#<module name="m_safelist.so"> -# -#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# -# When using Safelist, you may set the following values; -# -# The first value, 'throttle', sets the amount of time in seconds a user -# must wait between LIST commands. For example, if this is set to 60 -# (the default) then the user may not /LIST more than once a minute. -# If not defined, the default value is 60 seconds. -# -# The second value, 'maxlisters', indicates the maximum number of users -# which may be retrieving a LIST at once. It is not recommended you raise -# this value, as increasing it too high can make your network vulnerable -# to floodbots which waste your bandwidth and CPU time with LIST requests. -# -#<safelist throttle="60" maxlisters="50"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAJOIN module: Adds the /SAJOIN command -#<module name="m_sajoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAMODE module: Adds the oper /SAMODE command -#<module name="m_samode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SANICK module: Allows opers to change user's nicks -#<module name="m_sanick.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAPART module: Adds the oper /SAPART command -#<module name="m_sapart.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) -#<module name="m_saquit.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SASL authentication module: Provides support for IRC Authentication -# Layer (aka: atheme SASL) via AUTHENTICATE. -#<module name="m_sasl.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Secure list module: Prevent /LIST in the first minute of connection, -# crippling most spambots and trojan spreader bots. -#<module name="m_securelist.so"> -# -#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Securelist can be harmful to some irc search engines such as # -# netsplit.de and searchirc.com. To prevent securelist blocking these # -# sites from listing, define exception tags as shown below: # -<securehost exception="*@*.searchirc.org"> -<securehost exception="*@*.netsplit.de"> -<securehost exception="*@echo940.server4you.de"> -# # -# Define the following variable to change how long a user must wait # -# before issuing a LIST. If not defined, defaults to 60 seconds. # -# # -#<securelist waittime="60"> # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Servprotect module: Provides support for Austhex style +k / -# UnrealIRCD +S services mode -#<module name="m_servprotect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# See nicks module: Allow for SNOMASK +N which shows nick changes. -#<module name="m_seenicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Set Idle module: Adds a command for opers to change their -# idle time (mainly a toy) -#<module name="m_setidle.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -# this module implements the 'identified' state via user mode +r, which -# is similar to the DALnet and dreamforge systems. -# -# N O T E!! -# >> This CAN NOT be used at the same time as m_services_account << -# N O T E!! -#<module name="m_services.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -# this module implements the 'identified' state via account names (AC) -# and is similar in operation to the way asuka and ircu handle services. -# -# N O T E!! -# >> This CAN NOT be used at the same time as m_services << -# N O T E!! -#<module name="m_services_account.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Sethost module: Adds the /SETHOST command -# See m_chghost for how to customise valid chars for hostnames -#<module name="m_sethost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Setident module: Adds the /SETIDENT command -#<module name="m_setident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SETNAME module: Adds the /SETNAME command -#<module name="m_setname.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Show Whois module: Adds the +W usermode which allows opers -# to see when they are whois'ed (can be annoying). -#<module name="m_showwhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Shun module: Provides the /shun command, which stops a user executing -# all commands except PING and PONG. -#<module name="m_shun.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Spy module: Provides the ability to see the complete names list of -# channels an oper is not a member of -#<module name="m_spy.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL channel mode module: Adds support for SSL-only channels (+z). -# does not do anything useful without a working SSL module (see below) -#<module name="m_sslmodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Dummy ssl module: If you have other servers on your network which -# have SSL, but your server does not have ssl enabled, you should load -# this module, which will handle SSL metadata (e.g. the "Is using ssl" -# field in the WHOIS information). -#<module name="m_ssl_dummy.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, -# if enabled. You must copy the source for this module from the directory -# src/modules/extra, or answer 'yes' in ./configure when asked if you -# want to enable this, or it will not load. -#<module name="m_ssl_gnutls.so"> -# -#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_ssl_gnutls.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/GnuTLS_SSL_Module # -# # -# NOTE: If you want to use this module to encrypt and sign your # -# server to server traffic, you MUST load it before m_spanningtree in # -# your configuration file! # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL Info module: Allows users to retrieve information about other -# user's peer SSL certificates and keys. This can be used by client -# scripts to validate users. For this to work, one of m_ssl_gnutls.so -# or m_ssl_openssl.so must be loaded. You must symlink the source for -# this module from the directory src/modules/extra. -#<module name="m_sslinfo.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL, -# if enabled. You must copy the source for this module from the directory -# src/modules/extra, or answer 'yes' in ./configure when asked if you -# want to enable this, or it will not load. -#<module name="m_ssl_openssl.so"> -# -#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_ssl_openssl.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/OpenSSL_SSL_Module # -# # -# NOTE: If you want to use this module to encrypt and sign your # -# server to server traffic, you MUST load it before m_spanningtree in # -# your configuration file! # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL Cert Oper module: Allows opers to oper up using the key fingerprint -# stored within their SSL certificate and key pair. -# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must -# be loaded. An extra value should be added to enabled opers, which -# is in the following format: fingerprint="<hash>". For more information, -# see the example in the oper blocks. -#<module name="m_ssl_oper_cert.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Strip colour module: Adds the channel mode +S -#<module name="m_stripcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SILENCE module: Adds support for /SILENCE -#<module name="m_silence.so"> -# -# Configuration tags: -# -#<silence maxentries="32"> -# -# Sets the maximum number of entries on a users silence list. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQLite3 module: Allows other SQL modules to access SQLite3 # -# databases through a unified API. You must link the source for this # -# module from the directory src/modules/extra to src/modules, plus # -# the file m_sqlv2.h # -#<module name="m_sqlite3.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_sqlite.so is more complex than described here, see the wiki for # -# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module # -# -#<database hostname="/full/path/to/database.db" id="anytext"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQLutils module: Provides some utilities to SQL client modules, such -# as mapping queries to users and channels. You must copy the source -# for this module from the directory src/modules/extra/m_sqlutils.cpp -# and src/modules/extra/m_sqlutils.h into /src/modules -# Needed for, and loaded before: SQLauth and SQLoper -#<module name="m_sqlutils.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL authentication module: Allows IRCd connections to be tied into -# a database table (for example a forum). You must copy the source for -# this module from the directory src/modules/extra -# Depends on the SQLutils module being loaded first. -#<module name="m_sqlauth.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_sqlauth.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/SQL_Authentication_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL logging module: Allows you to log network-wide data for your -# network in a fully normalised set of SQL tables. You must copy the -# source for this module from the directory src/modules/extra -#<module name="m_sqllog.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# dbid - Database ID to use (see m_sql) # -# # -# See also: http://www.inspircd.org/wiki/SQL_Logging_Module # -# # -#<sqllog dbid="1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL oper module: Allows you to store oper credentials in an SQL table -# You must copy the source for this module from the directory src/modules/extra -# Depends on the SQLutils module being loaded first. -#<module name="m_sqloper.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# dbid - Database ID to use (see m_sql) # -# hash - Hashing provider to use for password hashing # -# # -# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module # -# # -#<sqloper dbid="1" hash="md5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # -# added/removed by Services. # -#<module name="m_svshold.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SWHOIS module: Allows you to add arbitary lines to user WHOIS. -#<module name="m_swhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Taxonomy module: Adds the /TAXONOMY command, used to view all -# metadata attached to a user. -#<module name="m_taxonomy.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test command module: Does nothing significant. Read: pointless. -#<module name="m_testcommand.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Timed bans module: Adds timed bans and the /TBAN command -#<module name="m_timedbans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test line module: Adds the /TLINE command, used to test how many -# users a /GLINE or /ZLINE etc would match. -#<module name="m_tline.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# UHNAMES support module: Adds support for the IRCX style UHNAMES -# extension, which displays ident and hostname in the names list for -# each user, saving clients from doing a WHO on the channel. Note that -# this module is not widely supported yet. If a client does not support -# UHNAMES it will not enable it, this will not break incompatible -# clients. -#<module name="m_uhnames.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Uninvite module: Adds the /UNINVITE command which lets users remove -# pending invites from channels without waiting for the user to join. -#<module name="m_uninvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Userip module: Adds the /USERIP command -#<module name="m_userip.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Vhost module: Adds the VHOST command which allows for adding virtual -# hosts which are accessible using a username and password in the config. -#<module name="m_vhost.so"> -# -#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# user - Username for the vhost. # -# # -# pass - Password for the vhost. # -# # -# host - Vhost to set. # -# -#<vhost user="some_username" pass="some_password" host="some.host"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Watch module: Adds the WATCH command, which is used by clients to -# maintain notify lists. -#<module name="m_watch.so"> -# -# Configuration tags: -# -#<watch maxentries="32"> -# -# Sets the maximum number of entries on a user's watch list. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) -# in a file "xline.db" which can be re-loaded on restart. This is useful -# for two reasons: it keeps bans so users may not evade them, and on -# bigger networks, server connections will take less time as there will -# be a lot less bans to apply - as most of them will already be there. -#<module name="m_xline_db.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# XMLSocket module: Adds support for connections using the shockwave -# flash XMLSocket. Note that this does not work if the client you are -# using has retarded ideas of the IRC protocol. Your client must still -# send RFC-correct lines to the server, this module only changes the -# line ending from newlines to null terminators. -# -#<module name="m_xmlsocket.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# ZipLinks module: Adds support for zlib deflate on server to server -# connections. Both ends of the connection must load this module. -# -#<module name="m_ziplink.so"> -# -# To use this module, you must enable it as a transport type in your -# <link> tags or <bind> tags using the transport name 'zip'. -# See the documentation of <link> and <bind>, respectively. -# - #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # The ban tags define nick masks, host masks and ip ranges which are # @@ -2664,6 +1225,20 @@ <die value="User error. Insert new user and press any key. (you didn't edit your config properly.)"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# ____ _ _____ _ _ ____ _ _ _ # +# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # +# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # +# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # +# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # +# # +# Well done, you've reached the end of this. # +# We now suggest you read and edit modules.conf, as modules are what # +# provide almost all the features of InspIRCd. :) # +# # +# The default does nothing -- we include it for simplicity for you. # +<include file="modules.conf"> + ######################################################################### # # -- cgit v1.2.3