summaryrefslogtreecommitdiff
path: root/docs/modules.conf.example
diff options
context:
space:
mode:
Diffstat (limited to 'docs/modules.conf.example')
-rw-r--r--docs/modules.conf.example1849
1 files changed, 1849 insertions, 0 deletions
diff --git a/docs/modules.conf.example b/docs/modules.conf.example
new file mode 100644
index 000000000..cc8620e89
--- /dev/null
+++ b/docs/modules.conf.example
@@ -0,0 +1,1849 @@
+#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# These tags define which modules will be loaded on startup by your #
+# server. Add modules without any paths. When you make your ircd #
+# using the 'make' command, all compiled modules will be moved into #
+# the folder you specified when you ran ./configure. The module tag #
+# automatically looks for modules in this location. #
+# If you attempt to load a module outside of this location, either #
+# in the config, or via /LOADMODULE, you will receive an error. #
+# #
+# By default, ALL modules are commented out. You must uncomment them #
+# or add lines to your config to load modules. Please refer to #
+# http://wiki.inspircd.org/Modules for a list of modules and #
+# each modules link for any additional conf tags they require. #
+# #
+# You may use wildcards in a <module> tag to load all modules which #
+# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
+# m_sapart, m_saquit and m_sanick) #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# To link servers to InspIRCd, you MUST load the m_spanningtree #
+# module. Since several features (like SSL server links) rely on #
+# other modules being loaded before m_spanningtree, the module itself #
+# is at the bottom of this file. DO NOT forget to load it. If you DO #
+# NOT do this, server links will NOT work at all. ie. The ports will #
+# NOT bind, and /connect will not work properly. This is by design, #
+# to allow for the implementation of other linking protocols in #
+# modules in the future. #
+# #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MD5 Module - Allows other modules to generate MD5 hashes, usually for
+# cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_cloaking.so and m_password_hash.so may rely on
+# this module being loaded to function.
+#
+#<module name="m_md5.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA256 Module - Allows other modules to generate SHA256 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_password_hash.so may rely on this module being
+# loaded to function. Certain modules such as m_spanningtree.so will
+# function without this module but when it is loaded their features will
+# be enhanced (for example the addition of HMAC authentication).
+#
+#<module name="m_sha256.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules may rely on this module being loaded to function.
+#<module name="m_ripemd160.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Abbreviation module: Provides the ability to abbreviate commands a-la
+# BBC BASIC keywords.
+#<module name="m_abbreviation.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alias module: Allows you to define server-side command aliases
+#<module name="m_alias.so">
+#
+# Fantasy settings:
+#
+#<fantasy prefix="!" allowbots="no">
+#
+# prefix:
+# Set the prefix for in-channel aliases (fantasy commands) to the
+# specified character. If not set, the default is "!".
+# allowbots:
+# If this is set to no, +B clients will not be able to use fantasy
+# commands. If not set, the default is no.
+#
+#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_alias.so module loaded, you may also define #
+# aliases as shown below. They are commonly used to provide shortcut #
+# commands to services, however they are not limited to just this use.#
+# An alias tag requires the following values to be defined in it: #
+# #
+# text - The text to detect as the actual command line, #
+# Cant contain spaces, but case insensitive. #
+# You may have multiple aliases with the same #
+# command name (text="" value), however the first #
+# found will be executed if its format value is #
+# matched, or it has no format value. Aliases are #
+# read from the top of the file to the bottom. #
+# #
+# usercommand - If this is true, the alias can be run simply as #
+# /aliasname. Defaults to true. #
+# #
+# channelcommand - If this is true, the alias can be used as an #
+# in-channel alias or 'fantasy command', prefixed #
+# by the fantasy prefix character, !aliasname by #
+# default. Defaults to false. #
+# #
+# format - If this is defined, the parameters of the alias #
+# must match this glob pattern. For example if you #
+# want the first parameter to start with a # for #
+# the alias to be executed, set format="#*" in the #
+# alias definition. Note that the :'s which are #
+# part of IRC formatted lines will be preserved #
+# for matching of this text. This value is #
+# optional. #
+# #
+# replace - The text to replace 'text' with. Usually this #
+# will be "PRIVMSG ServiceName :$2-" or similar. #
+# You may use the variables $1 through $9 in the #
+# replace string, which refer to the first through #
+# ninth word in the original string typed by the #
+# user. You may also use $1- through $9- which #
+# refer to the first word onwards, through to the #
+# ninth word onwards, e.g. if the user types the #
+# command "foo bar baz qux quz" then $3- will hold #
+# "baz qux quz" and $2 will contain "bar". You may #
+# also use the special variables: $nick, $ident, #
+# $host and $vhost, and you may separate multiple #
+# commands with a newline (which can be written in #
+# the file literally, or encoded as &nl; or \n #
+# depending on the config format setting). #
+# #
+# requires - If you provide a value for 'requires' this means #
+# the given nickname MUST be online for the alias #
+# to successfully trigger. If they are not, then #
+# the user receives a 'no such nick' 401 numeric. #
+# #
+# uline - Defining this value with 'yes', 'true' or '1' #
+# will ensure that the user given in 'requires' #
+# must also be on a u-lined server, as well as #
+# actually being on the network. If the user is #
+# online, but not on a u-lined server, then an #
+# oper-alert is sent out as this is possibly signs #
+# of a user trying to impersonate a service. #
+# #
+# operonly - Defining this value, with a value of 'yes', '1' #
+# or true will make the alias oper only. If a non- #
+# oper attempts to use the alias, it will appear #
+# to not exist. #
+# #
+#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
+#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+# requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+# requires="NickServ" uline="yes">
+#
+# This alias fixes a glitch in xchat 2.6.x and above and the way it
+# assumes IDENTIFY must be prefixed by a colon (:) character. It should
+# be placed ABOVE the default NICKSERV alias (the first example) listed
+# above.
+#
+#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
+# requires="NickServ" uline="yes">
+#
+# You may also add aliases to trigger based on something said in a
+# channel, aka 'fantasy' commands, configured in the same manner as any
+# other alias, with usercommand="no" and channelcommand="yes" The
+# command must be preceded by the fantasy prefix when used.
+#
+#<alias text="CS" usercommand="no" channelcommand="yes"
+# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
+#
+# This would be used as "!cs <command> <options>", with the channel
+# being automatically inserted after the command in the message to
+# ChanServ, assuming the fantasy prefix is "!".
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Allowinvite module: Gives channel mode +A to allow all users to use
+# /invite, and extban A to deny invite from specific masks
+#<module name="m_allowinvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alltime module: Shows time on all connected servers at once.
+# This module is oper-only and provides /alltime.
+# To use, ALLTIME must be in one of your oper class blocks.
+#<module name="m_alltime.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+#<module name="m_antibear.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibottler module: Labels bottler leech bots
+#<module name="m_antibottler.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Auditorium module: Adds channel mode +u which makes everyone else
+# except you in the channel invisible, used for large meetings etc.
+#<module name="m_auditorium.so">
+#
+# Auditorium settings:
+#
+#<auditorium showops="no" operoverride="no">
+#
+# showops:
+# Setting this value to yes makes m_auditorium behave like unrealircd
+# +u channel mode, e.g. ops see users joining, parting, etc, and users
+# joining the channel see the ops. Without this flag, the mode acts
+# like ircnet's +a (anonymous channels), showing only the user in the
+# names list, and not even showing the ops in the list, or showing the
+# ops that the user has joined.
+# operoverride:
+# Setting this value to yes makes m_auditorium affect the userlist for
+# regular users only. Opers will view all users in the channel normally.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Autoop module: Adds basic channel access controls via the +w listmode.
+# For example, +w o:R:Brain will op anyone identified to the account "Brain"
+# on join.
+#<module name="m_autoop.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban except module: Adds support for channel ban exceptions (+e)
+#<module name="m_banexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban redirection module: Allows bans which redirect to a specified
+# channel. e.g. +b nick!ident@host#channelbanneduserissentto
+#<module name="m_banredirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+#<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_blockamsg.so module loaded, you can configure it #
+# with the <blockamsg> tag: #
+# #
+# delay - How many seconds between two messages to force #
+# them to be recognised as unrelated. #
+# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
+# or 'killopers'. Define how to take action when #
+# a user uses /amsg or /ame. #
+#
+#<blockamsg delay="3" action="killopers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block CAPS module: Blocking all-CAPS messages with cmode +B
+#<module name="m_blockcaps.so">
+# #
+#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# percent - How many percent of text must be caps before text #
+# will be blocked. #
+# #
+# minlen - The minimum length a line must be for the block #
+# percent to have any effect. #
+# #
+# capsmap - A list of chars to be considered CAPS, this was #
+# you can add CAPS for your language. Also you can #
+# add things like ! and space to further lock down #
+# on caps usage. #
+#<blockcaps percent="50"
+# minlen="5"
+# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block colour module: Blocking colour-coded messages with cmode +c
+#<module name="m_blockcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Botmode module: Adds the user mode +B
+#<module name="m_botmode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CallerID module: Adds usermode +g which activates hybrid-style
+# callerid (== block all private messages unless you /accept first)
+#<module name="m_callerid.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# maxaccepts - Maximum number of entires a user can add to his #
+# /accept list. Default is 16 entries. #
+# operoverride - Can opers (note: ALL opers) ignore callerid mode? #
+# Default is no. #
+# tracknick - Preserve /accept entries when a user changes nick? #
+# If no (the default), the user is removed from #
+# everyone's accept list if he changes nickname. #
+# cooldown - Amount of time (in seconds) that must pass since #
+# the last notification sent to a user before he can #
+# be sent another. Default is 60 (1 minute). #
+#<callerid maxaccepts="16"
+# operoverride="no"
+# tracknick="no"
+# cooldown="60">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CAP module: Provides the CAP negotiation mechanism seen in
+# ratbox-derived ircds
+#<module name="m_cap.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CBAN module: Lets you disallow channels from being used at runtime.
+# This module is oper-only and provides /cban.
+# To use, CBAN must be in one of your oper class blocks.
+#<module name="m_cban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Censor module: Adds the channel mode +G
+#<module name="m_censor.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_censor module, then you must #
+# specify some censor tags. See also: #
+# http://wiki.inspircd.org/Modules/censor #
+#
+#<include file="censor.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
+# (http://cgiirc.sourceforge.net).
+#<module name="m_cgiirc.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you specify to use m_cgiirc, then you must specify one
+# or more cgihost tags which indicate authorised CGI:IRC servers which
+# will be connecting to your network, and an optional cgiirc tag.
+# For more information see: http://wiki.inspircd.org/Modules/cgiirc
+#
+# Set to yes if you want to notice opers when CGI clients connect
+# <cgiirc opernotice="no">
+#
+# The type field indicates where the module should get the real
+# client's IP address from, for further information, please see the
+# CGI:IRC documentation.
+#
+# Old style:
+# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
+# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
+# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
+# New style:
+# <cgihost type="webirc" password="foobar"
+# mask="somebox.mysite.com"> # Get IP from WEBIRC
+#
+# IMPORTANT NOTE:
+# ---------------
+#
+# When you connect CGI:IRC clients, there are two connect classes which
+# apply to these clients. When the client initially connects, the connect
+# class which matches the cgi:irc site's host is checked. Therefore you
+# must raise the maximum local/global clients for this ip as high as you
+# want to allow cgi clients. After the client has connected and is
+# determined to be a cgi:irc client, the class which matches the client's
+# real IP is then checked. You may set this class to a lower value, so that
+# the real IP of the client can still be restricted to, for example, 3
+# sessions maximum.
+#
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel create module: Adds snomask +j, which will notify opers of
+# any new channels that are created.
+# This module is oper-only.
+#<module name="m_chancreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel filter module: Allows channel-op defined message
+# filtering using simple string matches (channel mode +g)
+#<module name="m_chanfilter.so">
+#
+# If hidemask is set to yes, the user will not be shown the mask when
+# his/her message is blocked.
+#<chanfilter hidemask="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel History module: Displays the last 'X' lines of chat to a user
+# joining a channel with +H 'X:T' set; 'T' is the maximum time to keep
+# lines in the history buffer. Designed so that the new user knows what
+# the current topic of conversation is when joining the channel.
+# NOTE: Currently hard-limited to a maximum of 50 lines.
+#<module name="m_chanhistory.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel logging module: used to send snotice output to channels, to
+# allow staff to centrally monitor and discuss network activity.
+#
+# The "channel" field is where you want the messages to go, "snomasks"
+# is what snomasks you want to be sent to that channel. Multiple tags
+# are allowed.
+#<module name="m_chanlog.so">
+#<chanlog snomasks="AOcC" channel="#opers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel Names module: Allows disabling channels which have certain
+# characters in the channel name such as bold, colourcodes, etc which
+# can be quite annoying and allow users to on occasion have a channel
+# that looks like the name of another channel on the network.
+#<module name="m_channames.so">
+
+<channames
+ # denyrange: characters or range of characters to deny in channel
+ # names.
+ denyrange="2,3"
+
+ # allowrange: characters or range of characters to specifically allow
+ # in channel names.
+ allowrange="">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channelban: Implements extended ban j:, which stops anyone in already
+# in a channel matching a mask like +b j:#channel*mask from joining.
+#<module name="m_channelban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Chanprotect module: gives +q and +a channel modes
+#<module name="m_chanprotect.so">
+
+<chanprotect
+ # noservices: With this set to yes, when a user joins a empty channel,
+ # the server will set +q on them. If set to no, it will only set +o
+ # on them until they register the channel.
+ noservices="no"
+
+ # qprefix: Prefix (symbol) to use for +q users.
+ qprefix="~"
+
+ # aprefix: Prefix (symbol) to use for +a users.
+ aprefix="&amp;"
+
+ # deprotectself: If this value is set (true, yes or 1), it will allow
+ # +a and +q users to remove the +a and +q from themselves, otherwise,
+ # the status will have to be removed by services.
+ deprotectself="yes"
+
+ # deprotectothers: If this value is set to yes, true, or 1, then any
+ # user with +q or +a may remove the +q or +a from other users.
+ deprotectothers="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Check module: gives /check
+# Check is useful for looking up information on channels,
+# users, IP addresses and hosts.
+# This module is oper-only.
+# To use, CHECK must be in one of your oper class blocks.
+#<module name="m_check.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGHOST module: Adds the /CHGHOST command
+# This module is oper-only.
+# To use, CHGHOST must be in one of your oper class blocks.
+# NOTE: Services will not be able to set vhosts on users if this module
+# isn't loaded. If you're planning on running services, you probably
+# want to load this.
+#<module name="m_chghost.so">
+#
+#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
+# Optional - If you want to use special chars for hostnames you can #
+# specify your own custom list of chars with the <hostname> tag: #
+# #
+# charmap - A list of chars accepted as valid by the /CHGHOST #
+# and /SETHOST commands. Also note that the list is #
+# case-sensitive. #
+#<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGIDENT module: Adds the /CHGIDENT command
+# This module is oper-only.
+# To use, CHGIDENT must be in one of your oper class blocks.
+#<module name="m_chgident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGNAME module: Adds the /CHGNAME command
+# This module is oper-only.
+# To use, CHGNAME must be in one of your oper class blocks.
+#<module name="m_chgname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Cloaking module: Adds usermode +x and cloaking support.
+# Relies on the module m_md5.so being loaded before m_cloaking.so in
+# the configuration file.
+# To use, you should enable m_conn_umodes and add +x as
+# an enabled mode. See the m_conn_umodes module for more information.
+#<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you specify the m_cloaking.so module as above, you must define #
+# cloak keys, and optionally a cloak prefix as shown below. The cloak #
+# keys must be shared across the network for correct cloaking. #
+# #
+# There are four methods of cloaking: #
+# #
+# half Cloak only the "unique" portion of a host; show #
+# the last 2 parts of the domain, /16 subnet of IPv4 #
+# or /48 subnet of the IPv6 address. #
+# #
+# full Cloak the users completely, using three slices for #
+# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64) #
+# #
+# These methods use a single key that can be any length of text. #
+# An optional prefix may be specified to mark cloaked hosts. #
+# #
+# The following methods are maintained for backwards compatibility; #
+# they are slightly less secure, and always hide unresolved IPs #
+# #
+# compat-host InspIRCd 1.2-compatible host-based cloaking #
+# compat-ip InspIRCd 1.2-compatible ip-always cloaking #
+# #
+# You must specify key1, key2, key3, key4 for the compat cloaking #
+# modes; the values must be less than 0x80000000 and should be picked #
+# at random. Prefix is mandatory, will default to network name if not #
+# specified, and will always have a "-" appended. #
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+#
+#<cloak mode="half"
+# key="secret"
+# prefix="net-">
+
+#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Close module: Allows an oper to close all unregistered connections.
+# This module is oper-only and provides /close.
+# To use, CLOSE must be in one of your oper class blocks.
+#<module name="m_close.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Clones module: Adds an oper command /CLONES for detecting cloned
+# users. Warning: This module may be resource intensive when its
+# command is issued, use with care.
+# This module is oper-only.
+# To use, CLONES must be in one of your oper class blocks.
+#<module name="m_clones.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Common channels module: Adds user mode +c, which, when set, requires
+# that users must share a common channel with you to PRIVMSG or NOTICE
+# you.
+#<module name="m_commonchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Join: Allows you to force users to join one or more channels
+# automatically upon connecting to the server.
+#<module name="m_conn_join.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# If you have m_conn_join.so loaded, you can configure it using the
+# follow values:
+#
+#<autojoin channel="#one,#two,#three">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Usermodes: Set modes on users when they connect
+# When this module is loaded <connect:allow> tags may have an optional
+# modes="" value, which contains modes to add or remove from users
+# when they connect to the server.
+#<module name="m_conn_umodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Wait-for-Pong: Don't let a user connect until they PONG
+#<module name="m_conn_waitpong.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_conn_waitpong.so module loaded, configure it with #
+# the <waitpong> tag: #
+# #
+# sendsnotice - Whether to send a snotice on connect, like other #
+# older ircds #
+# #
+# killonbadreply - Whether to kill the user if they send the wrong #
+# PONG reply. #
+# #
+#<waitpong sendsnotice="yes" killonbadreply="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel cycle module. Server side /hop, with +ilk etc bypass.
+#<module name="m_cycle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connectban: Provides IP connection throttling. Any IP range that connects
+# too many times (configurable) in an hour is zlined for a (configurable)
+# duration, and their count resets to 0.
+#
+# ipv4cidr and ipv6cidr allow you to turn the comparison from individual
+# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
+# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
+#
+#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
+# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
+#
+#<module name="m_connectban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection throttle module. Configuration:
+#<module name="m_connflood.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# seconds, maxconns - Amount of connections per <seconds>.
+#
+# timeout - Time to wait after the throttle was activated
+# before deactivating it. Be aware that the time
+# is seconds + timeout.
+#
+# quitmsg - The message that users get if they attempt to
+# connect while the throttle is active.
+#
+# bootwait - Amount of time to wait before enforcing the
+# throttling when the server just booted.
+#
+#<connflood seconds="30" maxconns="3" timeout="30"
+# quitmsg="Throttled" bootwait="10">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Custom title module: Adds the /TITLE command which allows for trusted
+# users to gain a custom whois line and a optional
+# vhost can be specified.
+#<module name="m_customtitle.so">
+#
+#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# name - The username used to identify
+# password - The password used to identify
+# hash - The hash for the specific user's password (optional)
+# m_password_hash.so and a hashing module must be loaded for this to work
+# host - Allowed hostmask [optional]
+# title - Title shown in whois
+# vhost - Displayed host [optional]
+#
+#<title name="foo" password="bar" title="Official Chat Helper">
+#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DCCALLOW module: Adds the /DCCALLOW command
+#<module name="m_dccallow.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# blockchat - Whether to block DCC CHAT as well as DCC SEND
+# length - Default duration of entries in DCCALLOW list
+# action - Default action to take if no action is specified
+# can be 'block' or 'allow'
+#
+# File configuration:
+# pattern - The glob pattern to match against
+# action - Action to take if a user attempts to send a file
+# that matches this pattern, can be 'block' or 'allow'
+#
+#<dccallow blockchat="yes" length="5m" action="block">
+#<banfile pattern="*.exe" action="block">
+#<banfile pattern="*.txt" action="allow">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deaf module: adds support for ircu style usermode +d - deaf to
+# channel messages and channel notices.
+#<module name="m_deaf.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay join module: Adds the channel mode +D which delays all JOIN
+# messages from users until they speak. If they quit or part before
+# speaking, their quit or part message will not be shown to the channel
+# which helps cut down noise on large channels in a more friendly way
+# than the auditorium mode. Only channel ops may set the +D mode.
+#<module name="m_delayjoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay message module: Adds the channel mode +d which disallows a user
+# from talking in the channel unless they've been joined for X seconds.
+# Settable a la: /mode +d 30
+#<module name="m_delaymsg.so>
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deny Channels: Deny Channels from being used by users
+#<module name="m_denychans.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_denychans.so module loaded, you need to specify #
+# the channels to deny: #
+# #
+# name - The channel name to deny. (glob masks are ok) #
+# #
+# allowopers - If operators are allowed to override the deny. #
+# #
+# reason - Reason given for the deny. #
+# #
+# redirect - Redirect the user to a different channel #
+# #
+#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
+#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
+# #
+# Redirects will not work if the target channel is set +L. #
+# #
+# Additionally, you may specify channels which are allowed, even if #
+# a badchan tag specifies it would be denied: #
+#<goodchan name="#godsleeps"> #
+# Glob masks are accepted here also.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Devoice Module: Let users devoice themselves.
+#<module name="m_devoice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DNS Blacklist Module: Provides support for looking up IPs on one or #
+# more blacklists. #
+#<module name="m_dnsbl.so"> #
+# #
+# For configuration options please see the wiki page for m_dnsbl at #
+# http://wiki.inspircd.org/Modules/dnsbl #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Exempt Channel Operators Module: Provides support for allowing #
+# channel operators to be exempt from some channel modes. Supported #
+# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, #
+# filter, regmoderated, nonick, nonotice, and stripcolor. #
+#<module name="m_exemptchanops.so"> #
+# #
+#-#-#-#-#-#-#-#-#-#- EXEMPTCHANOPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# alwaysexempt - Modes channel operators are always exempt from,
+# regardless of channel setting.
+# neverexempt - Modes channel operators are never exempt from,
+# regardless of channel setting.
+#<exemptchanops alwaysexempt="nickflood censor flood filter" neverexempt="regmoderated">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Filter module: Provides message filtering, similar to SPAMFILTER.
+#<module name="m_filter.so">
+# #
+# This module depends upon a regex provider such as m_regex_pcre or #
+# m_regex_glob to function. You must specify which of these you want #
+# m_filter to use via the tag below. #
+# #
+# Valid engines are: #
+# #
+# glob - Glob patterns, provided via m_regex_glob.so #
+# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
+# tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
+# posix - POSIX regexps, provided via m_regex_posix.so, not availale #
+# on windows, no dependencies on other operating systems. #
+# #
+#<filteropts engine="glob"> #
+# #
+# Your choice of regex engine must match on all servers network-wide.
+#
+# You may specify specific channels that are exempt from being filtered:
+#<exemptfromfilter channel="#blah">
+#
+#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_filter module, then #
+# specfiy below the path to the filter.conf file, or define some #
+# <filter> tags. #
+# #
+#<include file="filter.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Gecosban: Implements extended ban r:, which stops anyone matching
+# a mask like +b r:*realname?here* from joining a channel.
+#<module name="m_gecosban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GeoIP module: Allows the server admin to ban users by country code.
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
+# and run make install, then uncomment this module to enable it.
+# This module requires GeoIP to be installed on your system,
+# use your package manager to find the appropriate packages
+# or check the InspIRCd wiki page for this module.
+#<module name="m_geoip.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# <geoip banunknown="false"> #
+# #
+# Set this value to true or yes to block unknown IP ranges which are #
+# not in the database (usually LAN addresses, localhost, etc) #
+# #
+# <geoban country="TR" reason="This country not permitted"> #
+# #
+# Use one or more of these tags to ban countries by country code. #
+# The country code must be in capitals and should be an ISO country #
+# code such as TR, GB, or US. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Globops module: gives /GLOBOPS and SNOMASK +g
+# This module is oper-only.
+# To use, GLOBOPS must be in one of your oper class blocks.
+#<module name="m_globops.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Global load module: Allows loading and unloading of modules network-
+# wide (USE WITH EXTREME CAUTION!)
+# This module is oper-only and provides /gloadmodule, /gunloadmodule
+# and /greloadmodule.
+# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
+# must be in one of your oper class blocks.
+#<module name="m_globalload.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Halfop module: Provides the +h (halfops) channel status mode.
+#<module name="m_halfop.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HELPOP module: Provides the /HELPOP command
+#<module name="m_helpop.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_helpop.so module, then #
+# specify below the path to the helpop.conf file, or if you like to #
+# make a mess, define your helpop tags in this conf. #
+# #
+#<include file="helpop.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDECHANS module: Allows opers to hide their channels list from non-
+# opers by setting user mode +I on themselves.
+# <module name="m_hidechans.so">
+#
+# HIDECHANS can optionally prevent opers from seeing channels on a +I
+# user, for more privacy if set to true.
+# This setting is not recommended for most mainstream networks.
+#<hidechans affectsopers="false">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDEOPER module: Allows opers to hide their oper status from non-
+# opers by setting user mode +H on themselves.
+# This module is oper-only.
+# <module name="m_hideoper.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hostchange module: Allows a different style of cloaking
+#<module name="m_hostchange.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you choose to use the m_hostchange.so module. #
+# Config Help - See http://wiki.inspircd.org/Modules/hostchange #
+# #
+#<host suffix="polarbears.org" separator="." prefix="">
+#<hostchange mask="*@fbi.gov" action="addnick">
+#<hostchange mask="*r00t@*" action="suffix">
+#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
+#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# httpd module: Provides http server support for InspIRCd
+#<module name="m_httpd.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# If you choose to use the m_httpd.so module, then you will need to add
+# a <bind> tag with type "httpd", and load at least one of the other
+# m_httpd_* modules to provide pages to display.
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http ACL module: Provides access control lists for m_httpd dependent
+# modules. Use this module to restrict pages by IP address and by
+# password.
+#
+#<module name="m_httpd_acl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Restrict access to the m_httpd_stats module to all but the local
+# network and when the correct password is specified:
+#
+# <httpdacl path="/stats*" types="password,whitelist"
+# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
+#
+# Deny all connections to all but the main index page:
+#
+# <httpdacl path="/*" types="blacklist" blacklist="*">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http config module: Allows the server's configuration to be viewed
+# over HTTP. Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_config.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http stats module: Provides basic stats pages over HTTP
+# Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_stats.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ident: Provides RFC 1413 ident lookup support
+# When this module is loaded <connect:allow> tags may have an optional
+# useident="yes|no" boolean value, determining whether or not to lookup
+# ident on users matching that connect tag.
+#<module name="m_ident.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you are using the m_ident.so module, then you can #
+# specify the timeout for ident lookups here. If not defined, it will #
+# default to one second. This is a non-blocking timeout which holds #
+# the user in a 'connecting' state until the lookup is complete. #
+# The bind value indicates which IP to bind outbound requests to. #
+# #
+#<ident timeout="5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invite except module: Adds support for channel invite exceptions (+I)
+#<module name="m_inviteexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invisible module - Adds support for usermode +Q (quiet) which lets an
+# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
+# opers are still able to see invisible users, and if an oper with +Q
+# deopers, they will become visible.
+#
+# This module is oper-only and seen by many to be quite abusive.
+#
+#<module name="m_invisible.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Join flood module: Adds support for join flood protection (+j)
+#<module name="m_joinflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Jump Server module: Adds support for the RPL_REDIR numeric
+# This module is oper-only.
+# To use, JUMPSERVER must be in one of your oper class blocks.
+#<module name="m_jumpserver.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
+#<module name="m_kicknorejoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Knock module: adds the /KNOCK command and +K channel mode
+#<module name="m_knock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP authentication module: Adds the ability to authenticate users #
+# via LDAP. This is an extra module which must be enabled explicitly #
+# by symlinking it from modules/extra, and requires the OpenLDAP libs #
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ldapauth.cpp
+# and run make install, then uncomment this module to enable it. #
+# #
+#<module name="m_ldapauth.so"> #
+# #
+# Configuration: #
+# #
+# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
+# attribute="uid" #
+# server="ldap://brainwave.brainbox.cc" #
+# allowpattern="Guest*" #
+# killreason="Access denied" #
+# searchscope="subtree" #
+# binddn="cn=Manager,dc=brainbox,dc=cc" #
+# bindauth="mysecretpass" #
+# verbose="yes"> #
+# #
+# The baserdn indicates the base DN to search in for users. Usually #
+# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
+# #
+# The attribute value indicates the attribute which is used to locate #
+# a user account by name. On POSIX systems this is usually 'uid'. #
+# #
+# The server parameter indicates the LDAP server to connect to. The #
+# ldap:// style scheme before the hostname proper is MANDITORY. #
+# #
+# The allowpattern value allows you to specify a wildcard mask which #
+# will always be allowed to connect regardless of if they have an #
+# account, for example guest users. #
+# #
+# Killreason indicates the QUIT reason to give to users if they fail #
+# to authenticate. #
+# #
+# The searchscope value indicates the subtree to search under. On our #
+# test system this is 'subtree'. Your mileage may vary. #
+# #
+# Setting the verbose value causes an oper notice to be sent out for #
+# every failed authentication to the server, with an error string. #
+# #
+# The binddn and bindauth indicate the DN to bind to for searching, #
+# and the password for the distinguished name. Some LDAP servers will #
+# allow anonymous searching in which case these two values do not #
+# need defining, otherwise they should be set similar to the examples #
+# above. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP oper configuration module: Adds the ability to authenticate #
+# opers via LDAP. This is an extra module which must be enabled #
+# explicitly by symlinking it from modules/extra, and requires the #
+# OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp
+# and run make install, then uncomment this module to enable it. #
+# #
+#<module name="m_ldapoper.so">
+# #
+# Configuration: #
+# #
+# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc"
+# server="ldap://brainwave.brainbox.cc"
+# searchscope="subtree"
+# binddn="cn=Manager,dc=brainbox,dc=cc"
+# bindauth="mysecretpass">
+# #
+# Available configuration items are identical to the same items in #
+# m_ldapauth above. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
+# used to temporarily close/open for new connections to the server. #
+# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
+# are specified in a <class> tag that the oper is part of. This is so #
+# you can control who has access to this possible dangerous command. #
+# If your server is locked and you got disconnected, do a REHASH from #
+# shell to open up again.
+#
+# This module is oper-only.
+#
+#<module name="m_lockserv.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Map hiding module: replaces /MAP and /LINKS output to users with a #
+# message to see a website, set by maphide="http://link.to/site" in #
+# the security tag, instead. #
+#<module name="m_maphide.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Msg flood module: Adds message/notice flood protection (+f)
+#<module name="m_messageflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MsSQL module: Allows other SQL modules to access MS SQL Server
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mssql.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_mssql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mssql.so is more complex than described here, see wiki for more #
+# info http://wiki.inspircd.org/Modules/mssql #
+#
+#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MySQL module: Allows other SQL modules to access MySQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mysql.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_mysql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mysql.so is more complex than described here, see the wiki for #
+# more: http://wiki.inspircd.org/Modules/mysql #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Named Modes module: This module allows for the display and set/unset
+# of channel settings and modes via long-form mode names in channels with
+# channelmode +Z set. For example, to set a channelban with named modes:
+# /mode #channel +Z ban=foo!bar@baz . Currently this doesn't serve much
+# purpose outside of making channel administration a bit easier in some
+# cases, but eventually modules will start using named modes only because
+# we're running out of channelmodes. :D
+#<module name="m_namedmodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# NAMESX module: Provides support for the NAMESX extension which allows
+# clients to see all the prefixes set on a user without getting confused.
+# This is supported by mIRC, x-chat, klient, and maybe more.
+#<module name="m_namesx.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# National characters module:
+# 1) Allows using national characters in nicknames.
+# 2) Allows using custom (national) casemapping over the network.
+# file -- filename of existing file in "locales" directory
+# casemapping -- custom value for 005 numeric (if you want it to be
+# different from the filename.
+#
+#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
+#<module name="m_nationalchars.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
+# Provides channel mode +F.
+#<module name="m_nickflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nicklock module: Let opers change a user's nick and then stop that
+# user from changing their nick again.
+# This module is oper-only.
+# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
+#<module name="m_nicklock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No ctcp module: Adds the channel mode +C to block CTCPs and extban C
+# to block CTCPs sent by specific users.
+#<module name="m_noctcp.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No kicks module: Adds the +Q channel mode and the Q: extban to deny
+# certain users from kicking.
+#<module name="m_nokicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No nicks module: Adds the +N channel mode, as well as the +b N:
+# extended bantype. +N stops all users from changing their nick,
+# the +b N: extban stops anyone from matching a +b N:nick!user@host
+# mask from changing their nick.
+#<module name="m_nonicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No part message module: adds extban 'p' to block part messages from #
+# matching users. #
+#<module name="m_nopartmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T and the extban T to block
+# specific users from noticing the channel.
+#<module name="m_nonotice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Network buisness join module
+# Allows an oper to join a channel using /OJOIN, giving them +Y on the
+# channel which makes them immune to kick/deop/etc.
+#<module name="m_ojoin.so">
+#
+#<ojoin prefix="!" notice="yes" op="yes">
+# Specify the prefix that +Y will grant here
+# Leave prefix empty if you do not wish +Y to grant a prefix
+# If notice is set to on, upon ojoin, the server will notice
+# the channel saying that the oper is joining on network business
+# If op is set to on, it will give them +o along with +Y
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper channels mode: Adds the +O channel mode and +beI type O:<mask>
+# to ban, exempt, and invex given oper type masks.
+# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
+# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
+# +be work in a similar fashion.
+#
+#<module name="m_operchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper Join module: Auto-joins opers to a channel upon oper-up
+# This module is oper-only. For the user equivalent, see m_conn_join.
+#<module name="m_operjoin.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_operjoin.so module, specify options here: #
+# #
+# channel - The channel name to join, can also be a comma #
+# seperated list eg. "#channel1,#channel2". #
+# #
+# override - Lets the oper join walking thru any modes that #
+# might be set, even bans. Use "yes" or "no". #
+# #
+#<operjoin channel="#channel" override="no">
+#
+# Alternatively you can use the autojoin="channellist" in a <type> #
+# tag to set specific autojoins for a type of oper, for example: #
+#
+#<type name="Helper" autojoin="#help" classes="...">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper log module: Logs all oper commands to the ircd log at default
+# loglevel.
+# This module is oper-only.
+#<module name="m_operlog.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper prefixing module: Gives IRC operators a prefix status character
+# on all channels they are in.
+#
+#<module name="m_operprefix.so">
+#
+# You may additionally customise the prefix character.
+#<operprefix prefix="!">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper MOTD module: Provides support for seperate message of the day
+# on oper-up
+# This module is oper-only.
+#<module name="m_opermotd.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_opermotd.so module, specify the motd here #
+# #
+# onoper - Should the message be sent on /OPER or only when #
+# /OPERMOTD is used. Use "yes" or "no". #
+# #
+#<opermotd file="oper.motd" onoper="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Override module: Adds support for oper override
+# This module is oper-only.
+#<module name="m_override.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_override.so is too complex it describe here, see the wiki: #
+# http://wiki.inspircd.org/Modules/override #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper levels module: Gives each oper a level and prevents
+# actions being taken against higher level opers
+# Specify the level as the 'level' parameter of the <type> tag
+# # This module is oper-only.
+#<module name="m_operlevels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper modes module: Allows you to specify modes to add/remove on oper
+# Specify the modes as the 'modes' parameter of the <type> tag
+# and/or as the 'modes' parameter of the <oper> tag.
+# This module is oper-only. For the user equivalent, see m_conn_umodes
+#<module name="m_opermodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper password hash module: Allows hashed oper passwords
+# Relies on the module m_md5.so and/or m_sha256.so being loaded before
+# m_password_hash.so in the configuration file.
+# This module is oper-only.
+#<module name="m_password_hash.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# To use this module, you must define a hash type for each oper's
+# password you want to hash. For example:
+#
+# <oper name="Brain"
+# host="ident@dialup15.isp.com"
+# hash="sha256"
+# password="a41d730937a53b79f788c0ab13e9e1d5"
+# type="NetAdmin">
+#
+# The types of hashing available vary depending on which hashing modules
+# you load, but usually if you load m_sha256.so and m_md5.so, both md5
+# and sha256 type hashing will be available (the most secure of which
+# is SHA256).
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Permanent Channels module: Channels with the permanent channels mode
+# will remain open even after everyone else has left the channel, and
+# therefore keep things like modes, ban lists and topic. Permanent
+# channels -may- need support from your Services package to function
+# properly with them. This adds channel mode +P.
+# This module is oper-only.
+#<module name="m_permchannels.so">
+#
+# If you like, m_permchannels can write a config file of permanent channels
+# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
+# If you want to do this, set the filename below, and uncomment the include.
+#
+#<permchanneldb filename="conf/permchannels.conf">
+#<include file="permchannels.conf">
+#
+# You may also create channels on startup by using the <permchannels> block.
+#<permchannels channel="#opers" modes="is" topic="Opers only.">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# PostgreSQL module: Allows other SQL modules to access PgSQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_pgsql.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_pgsql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_pgsql.so is more complex than described here, see the wiki for #
+# more: http://wiki.inspircd.org/Modules/pgsql #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Muteban: Implements extended ban m:, which stops anyone matching
+# a mask like +b m:nick!user@host from speaking on channel.
+#<module name="m_muteban.so">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Random Quote module: provides a random quote on connect.
+# NOTE: Some of these may mimic fatal errors and confuse users and
+# opers alike! - BEWARE!
+#<module name="m_randquote.so">
+#
+#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_randquote.so module, then #
+# specify below the path to the randquotes.conf file. #
+# #
+#<randquote file="randquotes.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Redirect module: Adds channel redirection (mode +L)
+#<module name="m_redirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for Glob or wildcard (?/*) matching.
+# You must have at least 1 provider loaded to use m_filter or m_rline
+# modules. This module has no additional requirements, as it uses the
+# matching already present in InspIRCd core.
+#<module name="m_regex_glob.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for PCRE (Perl-Compatible Regular
+# Expressions). You need libpcre installed to compile and load this
+# module. You must have at least 1 provider loaded to use m_filter or
+# m_rline.
+#<module name="m_regex_pcre.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for POSIX Regular Expressions.
+# You shouldn't need any additional libraries on a POSIX-compatible
+# system (ie: any Linux, BSD, but not Windows). You must have at least
+# 1 provider loaded to use m_filter or m_rline.
+# On POSIX-compliant systems, regex syntax can be found by using the
+# command: 'man 7 regex'.
+#<module name="m_regex_posix.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for TRE Regular Expressions.
+# This is the same regular expression engine used by UnrealIRCd, so
+# if you are most familiar with the syntax of /spamfilter from there,
+# this is the provider you want. You need libtre installed in order
+# to compile and load this module.
+#<module name="m_regex_tre.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Registered users only channel creation
+# Allows only registered users and opers to create new channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
+#<module name="m_regonlycreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK
+#<module name="m_remove.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restricted channels module: Allows only opers to create channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
+#<module name="m_restrictchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict message module: Allows users to only message opers.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
+#<module name="m_restrictmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban users through regular expression patterns
+#<module name="m_rline.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# If you wish to re-check a user when they change nickname (can be
+# useful under some situations, but *can* also use CPU with more users
+# on a server) then set the following configuration value:
+# Also, this is where you set what Regular Expression engine is to be
+# used. If you ever change it while running, all of your R-Lines will be
+# wiped. This is the regex engine used by all R-Lines set, and
+# m_regex_<engine>.so must be loaded, or rline will be nonfunctional
+# until you load it or change the engine to one that is loaded.
+#
+#<rline matchonnickchange="yes" engine="pcre">
+#
+# Generally, you will NOT want to use 'glob' here, as this turns
+# rline into just another gline. The exceptions are that rline will
+# always use the full nick!user@host realname string, rather than only
+# user@host, but beware that only the ? and * wildcards are available,
+# and are the only way to specify where the space can occur if you do
+# use glob. For this reason, is recommended to use a real regex engine
+# so that at least \s or [[:space:]] is available.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# JSON-RPC module: Encode and decode JSON-RPC requests for modules
+#<module name="m_rpc_json.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RPC test module: A test of the RPC API
+#<module name="m_rpctest.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAJOIN module: Adds the /SAJOIN command
+# This module is oper-only.
+# To use, SAJOIN must be in one of your oper class blocks.
+#<module name="m_sajoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAKICK module: Adds the /SAKICK command
+# This module is oper-only.
+# To use, SAKICK must be in one of your oper class blocks.
+#<module name="m_sakick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAMODE module: Adds the oper /SAMODE command
+# This module is oper-only.
+# To use, SAMODE must be in one of your oper class blocks.
+#<module name="m_samode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SANICK module: Allows opers to change user's nicks
+# This module is oper-only.
+# To use, SANICK must be in one of your oper class blocks.
+#<module name="m_sanick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAPART module: Adds the oper /SAPART command
+# This module is oper-only.
+# To use, SAPART must be in one of your oper class blocks.
+#<module name="m_sapart.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
+# This module is oper-only.
+# To use, SAQUIT must be in one of your oper class blocks.
+#<module name="m_saquit.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SATOPIC module: Adds the oper /SATOPIC command
+# This module is oper-only.
+# To use, SATOPIC must be in one of your oper class blocks.
+#<module name="m_satopic.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SASL authentication module: Provides support for IRC Authentication
+# Layer (aka: atheme SASL) via AUTHENTICATE.
+#<module name="m_sasl.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+#<module name="m_securelist.so">
+#
+#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Securelist can be harmful to some irc search engines such as #
+# netsplit.de and searchirc.com. To prevent securelist blocking these #
+# sites from listing, define exception tags as shown below: #
+<securehost exception="*@*.searchirc.org">
+<securehost exception="*@*.netsplit.de">
+<securehost exception="*@echo940.server4you.de">
+<securehost exception="*@*.ircdriven.com">
+# #
+# Define the following variable to change how long a user must wait #
+# before issuing a LIST. If not defined, defaults to 60 seconds. #
+# #
+#<securelist waittime="60"> #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Servprotect module: Provides support for Austhex style +k /
+# UnrealIRCD +S services mode
+#<module name="m_servprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# See nicks module: Allow for SNOMASK +N which shows nick changes.
+# This module is oper-only.
+#<module name="m_seenicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Set Idle module: Adds a command for opers to change their
+# idle time (mainly a toy)
+# This module is oper-only.
+# To use, SETIDLE must be in one of your oper class blocks.
+#<module name="m_setidle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via account names (AC)
+# and is similar in operation to the way asuka and ircu handle services.
+#
+# At the same time, this offers +r for users and channels to mark them
+# as identified seperately from the idea of a master account, which
+# can be useful for services which are heavily nick-as-account centric.
+#
+# This replaces m_services from 1.1 and earlier.
+#
+# Also of note is that this module implements two extbans:
+# +b R: (stop matching account names from joining)
+# +b M: (stop matching account names from speaking)
+#
+#<module name="m_services_account.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Sethost module: Adds the /SETHOST command
+# This module is oper-only.
+# To use, SETHOST must be in one of your oper class blocks.
+# See m_chghost for how to customise valid chars for hostnames
+#<module name="m_sethost.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Setident module: Adds the /SETIDENT command
+# This module is oper-only.
+# To use, SETIDENT must be in one of your oper class blocks.
+#<module name="m_setident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SETNAME module: Adds the /SETNAME command
+# This module is oper-only.
+# To use, SETNAME must be in one of your oper class blocks.
+#<module name="m_setname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Serverban: Implements extended ban s:, which stops anyone connected
+# to a server matching a mask like +b s:server.mask.here from joining.
+#<module name="m_serverban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show Whois module: Adds the +W usermode which allows opers
+# to see when they are whois'ed (can be annoying).
+# This module is oper-only.
+#<module name="m_showwhois.so">
+#
+# If you wish, you may also let users set this mode. Only opers with the
+# users/auspex priv will see real hosts of people, though. This setting
+# is not reloadable via /rehash, and will require /reloadmodule, as
+# it directly affects the mode object itself.
+#<showwhois opersonly="yes"
+#
+# You may also set whether or not users should recieve whois notices, should
+# they be /whois'd by an oper.
+# showfromopers="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Shun module: Provides the /shun command, which stops a user executing
+# most commands.
+# This module is oper-only.
+# To use, SHUN must be in one of your oper class blocks.
+#<module name="m_shun.so">
+#
+# You may also configure which commands you wish a user to be able to
+# perform. It should be noted that if a shunned user issues QUIT or PART
+# then their message will be removed, as if they did not issue one.
+#
+# You can (optionally) let the user know that their command was blocked.
+#
+# You may also let SHUN affect opers (defaults to no).
+#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spy module: Provides the ability to see the complete names list of
+# channels an oper is not a member of
+# This module is oper-only.
+#<module name="m_spy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL channel mode module: Adds support for SSL-only channels (+z).
+# does not do anything useful without a working SSL module (see below)
+#<module name="m_sslmodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_gnutls.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
+# http://wiki.inspircd.org/Modules/ssl_gnutls #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Info module: Allows users to retrieve information about other
+# user's peer SSL certificates and keys. This can be used by client
+# scripts to validate users. For this to work, one of m_ssl_gnutls.so
+# or m_ssl_openssl.so must be loaded. This module also adds the
+# "* <user> is using a secure connection" whois line, the ability for
+# opers to use SSL fingerprints to verify their identity and the ability
+# to force opers to use SSL connections in order to oper up.
+# It is highly recommended to load this module especially if
+# you use SSL on your network.
+# For how to use the oper features, please see the first example <oper> tag
+# in opers.conf.example.
+#
+#<module name="m_sslinfo.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_openssl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_openssl.so is too complex it describe here, see the wiki: #
+# http://wiki.inspircd.org/Modules/ssl_openssl #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Strip colour module: Adds the channel mode +S
+#<module name="m_stripcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SILENCE module: Adds support for /SILENCE
+#<module name="m_silence.so">
+#
+# Configuration tags:
+#
+#<silence maxentries="32">
+#
+# Sets the maximum number of entries on a users silence list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3 #
+# databases through a unified API. You must link the source for this #
+# module from the directory src/modules/extra to src/modules, plus #
+# the file m_sqlv2.h #
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_aqlite.cpp
+# and run make install, then uncomment this module to enable it. #
+#
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlite.so is more complex than described here, see the wiki for #
+# more: http://wiki.inspircd.org/Modules/sqlite3 #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLutils module: Provides some utilities to SQL client modules, such
+# as mapping queries to users and channels. You must copy the source
+# for this module from the directory src/modules/extra/m_sqlutils.cpp
+# and src/modules/extra/m_sqlutils.h into /src/modules
+# Needed for, and loaded before: SQLauth and SQLoper
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlutils.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_sqlutils.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL authentication module: Allows IRCd connections to be tied into
+# a database table (for example a forum). You must copy the source for
+# this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlauth.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_sqlauth.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlauth.so is too complex it describe here, see the wiki: #
+# http://wiki.inspircd.org/Modules/sqlauth #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL logging module: Allows you to log network-wide data for your
+# network in a fully normalised set of SQL tables. You must copy the
+# source for this module from the directory src/modules/extra
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqllog.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_sqllog.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# #
+# See also: http://wiki.inspircd.org/Modules/sqllog #
+# #
+#<sqllog dbid="1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL oper module: Allows you to store oper credentials in an SQL table
+# You must copy the source for this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqloper.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_sqloper.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# hash - Hashing provider to use for password hashing #
+# #
+# See also: http://wiki.inspircd.org/Modules/sqloper #
+# #
+#<sqloper dbid="1" hash="md5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
+# added/removed by Services. #
+#<module name="m_svshold.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
+# This module is oper-only.
+# To use, SWHOIS must be in one of your oper class blocks.
+#<module name="m_swhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test module: enable this to create a command useful in testing
+# flood control. To avoid accidental use on live networks, the server
+# name must contain ".test" to load the module
+#<module name="m_testnet.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Timed bans module: Adds timed channel bans and the /TBAN command
+#<module name="m_timedbans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test line module: Adds the /TLINE command, used to test how many
+# users a /GLINE or /ZLINE etc would match.
+# This module is oper-only.
+# To use, TLINE must be in one of your oper class blocks.
+#<module name="m_tline.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# UHNAMES support module: Adds support for the IRCX style UHNAMES
+# extension, which displays ident and hostname in the names list for
+# each user, saving clients from doing a WHO on the channel. Note that
+# this module is not widely supported yet. If a client does not support
+# UHNAMES it will not enable it, this will not break incompatible
+# clients.
+#<module name="m_uhnames.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Uninvite module: Adds the /UNINVITE command which lets users remove
+# pending invites from channels without waiting for the user to join.
+#<module name="m_uninvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Userip module: Adds the /USERIP command
+# This module is oper-only.
+# To use, USERIP must be in one of your oper class blocks.
+#<module name="m_userip.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Vhost module: Adds the VHOST command which allows for adding virtual
+# hosts which are accessible using a username and password in the config.
+#<module name="m_vhost.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# user - Username for the vhost. #
+# #
+# pass - Password for the vhost. #
+# #
+# hash - The hash for the specific user (optional)
+# m_password_hash.so and a hashing module must be loaded for this to work
+# #
+# host - Vhost to set. #
+#
+#<vhost user="some_username" pass="some_password" host="some.host">
+#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Watch module: Adds the WATCH command, which is used by clients to
+# maintain notify lists.
+#<module name="m_watch.so">
+#
+# Configuration tags:
+#
+#<watch maxentries="32">
+#
+# Sets the maximum number of entries on a user's watch list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
+# in a file "xline.db" which can be re-loaded on restart. This is useful
+# for two reasons: it keeps bans so users may not evade them, and on
+# bigger networks, server connections will take less time as there will
+# be a lot less bans to apply - as most of them will already be there.
+#<module name="m_xline_db.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ZipLinks module: Adds support for zlib deflate on server to server
+# connections. Both ends of the connection must load this module.
+# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ziplink.cpp
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="m_ziplink.so">
+#
+# To use this module, you must enable it as a ssl type in your
+# <link> tags or <bind> tags using the ssl name 'ziplinks'.
+# See the documentation of <link> and <bind>, respectively.
+#
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# To link servers to InspIRCd, you MUST load the m_spanningtree #
+# module. Since several features (like SSL server links) rely on #
+# other modules being loaded before m_spanningtree, the module itself #
+# is at the bottom of this file. DO NOT forget to load it. If you DO #
+# NOT do this, server links will NOT work at all. ie. The ports will #
+# NOT bind, and /connect will not work properly. This is by design, #
+# to allow for the implementation of other linking protocols in #
+# modules in the future. #
+# #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spanning Tree module - allows linking of servers using the spanning
+# tree protocol (see the READ THIS BIT section above).
+# You will almost always want to load this.
+#
+#<module name="m_spanningtree.so">
+
+