diff options
| -rw-r--r-- | conf/censor.conf.example | 12 | ||||
| -rw-r--r-- | conf/filter.conf.example | 24 | ||||
| -rw-r--r-- | conf/helpop.conf.example | 323 | ||||
| -rw-r--r-- | conf/inspircd.conf.example | 744 | ||||
| -rw-r--r-- | conf/inspire.motd.example | 12 | ||||
| -rw-r--r-- | conf/inspire.quotes.example | 175 | ||||
| -rw-r--r-- | conf/inspire.rules.example | 3 |
7 files changed, 0 insertions, 1293 deletions
diff --git a/conf/censor.conf.example b/conf/censor.conf.example deleted file mode 100644 index 89730669f..000000000 --- a/conf/censor.conf.example +++ /dev/null @@ -1,12 +0,0 @@ -# Configuration file for m_censor.so (1.0.0.0) -# C.J.Edwards May 2004. -# - -# The tags for this module are formatted as follows: -# -# <badword text="simple word" -# replace="text to replace with"> - -<badword text="shit" replace="poo"> -<badword text="fuck" replace="(censored)"> - diff --git a/conf/filter.conf.example b/conf/filter.conf.example deleted file mode 100644 index 99e133256..000000000 --- a/conf/filter.conf.example +++ /dev/null @@ -1,24 +0,0 @@ -# Configuration file for m_filter.so (2.0.0.0) -# C.J.Edwards April 2004. -# - -# The tags for this module are formatted as follows: -# -# <keyword pattern="any glob pattern here" -# reason="reason for filtering" -# action="action to take"> -# -# Valid actions for 'action' are: -# -# block This blocks the line, sends out a notice to all opers with -# +s and informs the user that their message was blocked. -# -# none This action causes nothing to be done except logging. This -# is the default action if none is specified. -# -# kill This disconnects the user, with the 'reason' parameter as -# the kill reason. - -<keyword pattern="*qwerty*" reason="You qwertied!" action="block"> -<keyword pattern="*killmenow*" reason="As you request." action="kill"> - diff --git a/conf/helpop.conf.example b/conf/helpop.conf.example deleted file mode 100644 index ae4c62229..000000000 --- a/conf/helpop.conf.example +++ /dev/null @@ -1,323 +0,0 @@ -# Sample configuration file for m_helpop.so -# You can either copy this into your conf folder and set up the module to use it, -# or you can customise the responses for your network and/or add more. - -<start line1=" InspIRCd help system" - line2=" --------------------" - line3="-" - line4="This system provides help for commands and modes." - line5="Specify your question or a command name as the" - line6="parameter for this command. If you are an oper" - line7="you must prefix your query with a ? symbol." - line8="-" - line9="/HELPOP COMMANDS - To see a list of user commands" - line10="/HELPOP COPER - To see a list of oper commands" - line11="/HELPOP UMODES - To see a list of user modes" - line12="/HELPOP CHMODES - To see a list of channel modes"> - -<nohelp line1="There is no help for the topic" - line2="You searched for. Please try again."> - -<nohelpo line1="There is no help for the topic" - line2="You searched for. Please try again." - line3="-" - line4="Your Query has been forwarded to the IRCops"> - -<commands line1="User Commands" - line2="-------------" - line3="USER NICK QUIT VERSION PING" - line4="PONG ADMIN PRIVMSG INFO TIME" - line5="WHOIS NOTICE JOIN NAMES PART" - line6="KICK MODE TOPIC WHO MOTD" - line7="RULES OPER LIST LUSERS STATS" - line8="USERHOST AWAY ISON SUMMON USERS" - line9="INVITE PASS WHOWAS LINKS MAP" - line10="COMMANDS MODULES"> - -<user line1="/USER [ident] [local host] [remote host] :[GECOS]" - line2="This command is used by your client to register your irc session." - line3="You should not use it during an established connection."> - -<nick line1="/NICK [new nick]" - line2="Change your nickname to [new nick]"> - -<quit line1="/QUIT [reason]" - line2="Quit from IRC and end your current session"> - -<version line1="/VERSION" - line2="Returns the server's version number"> - -<ping line1="/PING [server]" - line2="Ping a server. Target server will answer with a PONG"> - -<pong line2="/PONG [server]" - line2="Your client should send this to answer server PINGs. You" - line3="should not issue this command manually."> - -<admin line1="/ADMIN [server]" - line2="Fetches the administrative information on the given" - line3="server."> - -<privmsg line1="/MSG [target] [text]" - line2="Sends a message to a user or channel specified in [target]"> - -<notice line1="/NOTICE [target] [text]" - line2="Sends a notice to a user or channel specified in [target]"> - -<join line1="/JOIN [channel]{,[channel]} [key]{,[key]}" - line2="Joins one or more channels you provide the names for"> - -<names line1="/NAMES [channel]{,[channel]}" - line2="Return a list of users on the channels you provide"> - -<part line1="/PART [channel]{,[channel]}" - line2="Leaves one or more channels you specify"> - -<kick line1="/KICK [channel] [nick]" - line2="Kicks a user from a channel you specify. You must be" - line3-"At least a channel halfoperator to kick a user"> - -<mode line1="/MODE [target] [+|-][modes]{[+|-][modes]} {mode parameters}" - line2="Sets the mode for a channel or a nickname specified in [target]" - line3="A user may only set modes upon themselves, and may not set the" - line4="+o usermode, and a user may only change channel modes of" - line5="channels where they are at least a halfoperator."> - -<topic line1="/TOPIC [channel] {topic}" - line2="Sets or retrieves the channel topic. If a channel topic is" - line3="given in teh command and the channel is either not +t, or" - line4="You are at least a halfoperator, the channel topic will be" - line5="changed to the new one you provide"> - -<who line1="/WHO [channel|nick|servermask|o 0]" - line2="Looks up the information of users matching the range you" - line3="provide. You may only /WHO nicknames in channels or on servers" - line4="where you share a common channel with them." - line5="The syntax '/WHO o 0' shows a list of online IRC operators."> - -<motd line1="/MOTD [server]" - line2="Show the message of the day for [server]. Messages of the" - line3="day contain important server rules and notice and should be" - line4="read before using a server in any way!"> - -<rules line1="/RULES" - line2="Show the rules file for the local server. This is similar in" - line3="effect to /MOTD except that rules are optional. All users are" - line4="sent the MOTD when they connect without having to request it."> - -<oper line1="/OPER [login] [password]" - line2="Attempts to authenticate a user as an IRC operator." - line3="Please be aware that both successful and unsucessful oper attempts" - line4="Are logged, and sent to online IRC operators"> - - -<list line1="/LIST [pattern]" - line2="Creates a list of all existing channels matching the glob pattern" - line3="[pattern], e.g. *chat* or bot*"> - -<lusers line1="/LUSERS" - line2="Shows a count of local and remote users, servers and channels."> - -<stats line1="/STATS [symbol]" - line2="Shows various server statistics. Depending on configuration this" - line3="command may be reserved for oper-only use." - line4="-" - line5="Valid symbols are:" - line6="-" - line7="m Show command statistics, number of times commands have been used" - line8="z Show memory usage statistics" - line9="o Show a list of all valid oper usernames and hostmasks" - line10="l Show all inbound and outbound server and client connections" - line11="u Show server uptime" - line12="k Show k-lines (local bans)" - line13="g Show g-lines (global bans)" - line14="q Show q-lines (nick mask bans)" - line15="Z Show z-lines (ip mask bans)" - line16="Y Show connection classes" - line17="C Show link blocks" - line18="U Show u-lined servers" - line19="P Show online opers and their idle times" - line20="I Show connect class permissions" - line21="e Show e-lines (local ban exemptions)" - line22="-" - line23="Note that all /STATS use is broadcast to online IRC operators."> - -<kline line1="/KLINE [user@host] {[duration] :[reason]}" - line2="Sets or removes a k-line (host based ban) on a host and ident mask." - line3="You must specify at least 3 parameters to add a ban, and one" - line4="parameter to remove a ban (just the user@host section)." - line5="The duration may be specified in seconds, or in the following format" - line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," - line7="5 minutes and 6 seconds. All fields in this format are optional."> - -<zline line1="/ZLINE [ipmask] {[duration] :[reason]}" - line2="Sets or removes a z-line (ip based ban) on an ip range mask." - line3="You must specify at least 3 parameters to add a ban, and one" - line4="parameter to remove a ban (just the user@host section)." - line5="The duration may be specified in seconds, or in the following format" - line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," - line7="5 minutes and 6 seconds. All fields in this format are optional."> - -<qline line1="/QLINE [nickmask] {[duration] :[reason]}" - line2="Sets or removes a q-line (nick based ban) on a nick mask." - line3="You must specify at least 3 parameters to add a ban, and one" - line4="parameter to remove a ban (just the user@host section)." - line5="The duration may be specified in seconds, or in the following format" - line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," - line7="5 minutes and 6 seconds. All fields in this format are optional."> - -<gline line1="/GLINE [user@host] {[duration] :[reason]}" - line2="Sets or removes a g-line (global host based ban) on host mask." - line3="You must specify at least 3 parameters to add a ban, and one" - line4="parameter to remove a ban (just the user@host section)." - line5="The duration may be specified in seconds, or in the following format" - line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," - line7="5 minutes and 6 seconds. All fields in this format are optional."> - -<eline line1="/ELINE [user@host] {[duration] :[reason]}" - line2="Sets or removes a e-line (local ban exception) on host mask." - line3="You must specify at least 3 parameters to add an exception, and one" - line4="parameter to remove an exception (just the user@host section)." - line5="The duration may be specified in seconds, or in the following format" - line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," - line7="5 minutes and 6 seconds. All fields in this format are optional."> - -<userhost line1="/USERHOST [nickname]" - line2="Returns the hostname and nickname of a user, and some other" - line3="miscellanious information."> - -<away line1="/AWAY {message}" - line2="If a message is given, marks you as being away, otherwise" - line3="removes your away status and previous message"> - -<ison line1="/ISON [nick] {[nick]...}" - line2="Returns a subset of the nicks you give, showing only those" - line3="that are currently online."> - -<summon line1="/SUMMON [user]" - line2="Summons a user from the shell where the ircd is running onto irc" - line3="This command is deprecated in the current protocol."> - -<users line1="/USERS" - line2="Shows users logged into the shell where the ircd is running." - line3="This command is deprecated in the current protocol."> - -<invite line1="/INVITE [nick] [channel]" - line2="Invites a user to a channel. If the channel is NOT +i, any" - line3="user, channel op or not, may invite any other user to the" - line4="channel, so long as they are a member of that channel." - line5="Otherwise, if +i is set only channel halfoperators" - line6="and above may invite users into the channel"> - -<pass line1="/PASS [password]" - line2="This command is used by your irc client when setting up" - line3="your irc session, and should not be issued by a fully" - line4="connected client."> - -<whowas line1="/WHOWAS [nick]" - line2="Returns a list of times the user was last seen on irc" - line3="along with the time they were last seen and their server."> - -<links line1="/LINKS" - line2="Shows all servers linked to this one. Note that in this" - line3="server implementation all links will be flattened as" - line4="a tree based layout is not in use."> - -<map line1="/MAP" - line2="Shows a graphical representation of all users and servers" - line3="on the network. The tree diagram is inaccurate in this" - line4="implementation as a tree based network is not in place."> - - -<coper line1="Oper Commands" - line2="-------------" - line3="DIE RESTART KILL REHASH TRACE" - line4="CONNECT SQUIT MODULES KLINE ZLINE" - line5="QLINE GLINE ELINE"> - -<die line1="/DIE [password]" - line2="If the correct password is provided, and you are an operator," - line3="This command will shut down the local server."> - -<restart line1="/RESTART [password]" - line2="If the correct password is provided, and you are an operator," - line3="This command will restart the local server."> - -<commands line1="/COMMANDS" - line2="Shows all currently available commands."> - -<kill line1="/KILL [user] [reason]" - line2="This command will disconnect a user from IRC with the given" - line3="reason."> - -<rehash line1="/REHASH" - line2="This command will cause the server configuration file to be" - line3="re-read and values re-initialised."> - -<trace line1="/TRACE [nick|user@host|servermask]" - line2="This command will provide a list of all users and servers which" - line3="must be passed through or over to reach a given object (server" - line4="or user)"> - -<connect line1="/CONNECT [servermask]" - line2="Create a mesh connection to the given servermask. You must have" - line3="configured the server for linking in your configuration file," - line4="and provided a password."> - -<squit line1="/SQUIT" - line2="Disconnects the local server from the mesh network, causing every" - line3="other server in the mesh to drop it."> - -<modules line1="/MODULES" - line2="Lists currently loaded modules, their memory offsets and version" - line3="numbers and flags. If you are not an operator, you will see reduced" - line4="detail."> - -<loadmodule line1="/LOADMODULE [filename.so]" - line2="Loads a module into the IRCd."> - -<unloadmodule line1="/UNLOADMODULE [filename.so]" - line3="Unloads a module from the IRCd. The module cannot have the static" - line4="flag set (see the output of /MODULES)"> - -<umodes line1="User Modes" - line2="----------" - line3="o Is an IRC operator" - line4="i Is invisible to /WHO" - line5="w Can receive wallops messages" - line6="s Can receive server notices" - line7="x Cloaked hostname (requires cloaking module)" - line8="g Can receive globops (requires globops module)" - line9="h Will receive helpops notification (requires helpop module)"> - -<chmodes line1="Channel Modes" - line2="-------------" - line3="v [nickname] Gives voice to [nickname] (can talk on +m channel)" - line4="h [nickname] Gives halfops to [nickname] (requires halfop module)" - line5="o [nickname] Gives ops to [nickname]" - line6="b [hostmask] Bans [hostmask] on the channel" - line7="a [nickname] Give protected status to [nickname] (+q only)" - line8="q [nickname] Give founder status to [nickname] (ulines only)" - line9="i Make the channel invite only, must /INVITE users" - line10="k [key] Set the channel key (password) to [key]" - line11="l [limit] Set the maximum possible users to [limit]" - line12="m Enable moderation. Only +vo(h) can speak" - line13="n Only users who are members of the channel may message it" - line14="p Make channel private (hide from /LIST)" - line15="s Make channel secret (can't be used at the same time as +p)" - line16="O Channel is IRCops only (can only be set by IRCops)" - line17="t Only halfops and above can change the topic" - line18="Q Only U-Lined servers/nicks can kick" - line19="T Only halfops/ops can send NOTICEs to the channel" - line20="C No CTCPs allowed to the channel" - line21="c mIRC colour codes blocked on the channel" - line22="K No /KNOCK allowed to channel (if knock module is loaded)" - line23="L [channel] If the channel is full, redirect users to [channel]" - line24="N No nickchanges while on the channel" - line25="-------------" - line26="NOTE: A large number of these modes are dependent upon server-side modules" - line27="being loaded by a server/network administrator. The actual modes available" - line28="on your network may be very different to this list. Please consult your" - line29="help channel if you have any questions."> - - diff --git a/conf/inspircd.conf.example b/conf/inspircd.conf.example deleted file mode 100644 index 7da7a1596..000000000 --- a/conf/inspircd.conf.example +++ /dev/null @@ -1,744 +0,0 @@ -######################################################################## -# # -# --------------------------- # -# InspIRCd Configuration File # -# --------------------------- # -# # -##################################||#################################### - #||# -##################################||#################################### -# # -# This is an example of the config file for InspIRCd. # -# Change the options to suit your network # -# # -# Last updated on : 06/06/2005 # -# Written by : CC (cc@backchat.co.za) # -# Updated by : katsklaw (katsklaw@gmail.com) # -######################################################################## - - - -#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- -# # -# Here is where you enter the information about your server. # -# # -# Syntax is as follows: # -# <server name="server.name" # -# description="Server Description" # -# network="MyNetwork"> # -# # - -<server name="penguin.omega.org.za" - description="Waddle World" - network="Omega"> - - -#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Describes the Server Administrator's real name, nick # -# and email address. # -# # -# Syntax is as follows: # -# <admin name="real name" # -# nick="nick name" # -# email="email@address.com"> # -# # - -<admin name="Johnny English" - nick="MI5" - email="MI5@the.best.secret.agent"> - - -#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- -# # -# Enter the port and address bindings here. # -# # -# bind address - specifies which the address which ports bind # -# port - opens an unused port # -# type - can be 'clients' or 'servers'. The clients type is # -# a standard tcp based socket, the servers type is a # -# also a TCP based connection but of a different # -# format. # -# default - if the port type is 'servers' then this can be # -# specified. If set to 'yes', it indicates that this # -# port is the default route for all /connect commands.# -# if you do not bind your default route to an # -# external ip, or all ip's, you may have connection # -# problems. # -# # -# Leaving address empty binds to all available interfaces # -# # -# Syntax is as follows: # -# # -# <bind address="ip number" port="port" type="clients"> # -# <bind address="ip number" port="port" type="servers"> # -# <bind address="ip number" port="port" type="servers" default="yes"> # -# # - -<bind address="" port="6660" type="clients"> -<bind address="" port="7000" type="servers" default="yes"> -<bind address="" port="7001" type="servers"> - - -#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- -# # -# You can configure the passwords here which you wish to use for # -# the die and restart commands. Only trusted ircops who will # -# need this ability should know the die and restart password. # -# # -# Syntax is as follows: # -# <power diepass="die password" restartpass="restart password" # -# pause="secs before dying"> # -# # - -<power diepass="diepass" restartpass="restartpass" pause="2"> - - -#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This optional tag allows you to include another config file # -# allowing you to keep your configuration tidy. The configuration # -# file you include will be treated as part of the configuration file # -# which includes it, in simple terms the inclusion is transparent. # -# # -# All paths to config files are relative to the directory of the main # -# config file inspircd.conf, unless the filename starts with a forward# -# slash (/) in which case it is treated as an absolute path. # -# # -# Syntax is as follows: # -# <include file="file.conf"> # -# # - -#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#- -# # -# This is where you can configure which connections are allowed # -# and denied access onto your server. # -# The password is optional. # -# You may have as many of these as you require. # -# To allow/deny all connections use a * # -# # -# Syntax is as follows: # -# <connect allow="ip or host"> # -# <connect allow="ip or host" password="blahblah"> # -# <connect allow="ip or host" password="blah" timeout="10"> # -# <connect allow="ip or host" timeout="blah" flood="5"> # -# <connect allow="ip or host" threshold="8" pingfreq="120"> # -# <connect allow="ip or host" sendq="99999" revcq="696969"> # -# <connect deny="ip or host"> # -# # -# You may optionally include timeout="x" on any allow line, which # -# specifies the amount of time given before an unknown connection # -# is closed if USER/NICK/PASS are not given. This value is in secs # -# # -# You may also optionally include a flood="x" line which indicates # -# the number of lines a user may place into their buffer at once # -# before they are disconnected for excess flood. The default is to # -# DISABLE this feature. A recommended value is 10. A counter is # -# maintained for each user which is reset every 'threshold' seconds # -# and specifying this threshold value with threshold="X" indicates # -# how often the counter is reset. For example, with flood="5" and # -# threshold="8", the user may not send more than 5 lines in 8 secs. # -# # -# You may optionally specify the sendq size and ping frequency of # -# each connect:allow line using the pingfreq="X" and sendq="X" # -# settings as shown in the full example below. # -# The ping frequency is specified in seconds, and the sendq size # -# in bytes. It is recommended, although not enforced, that you # -# should never set your sendq size to less than 8k. Send Queues are # -# dynamically allocated and can grow as needed up to the maximum # -# size specified. # -# # -# The optional recvq value is the maximum size which users in this # -# group may grow their receive queue to. This is recommended to be # -# kept pretty low compared to the sendq, as users will always # -# recieve more than they send in normal circumstances. The default # -# if not specified is 4096. # -# # -# IMPORTANT NOTE, CALL THE CONFUSION POLICE! # -# The sendq is the data waiting to be sent TO THE USER. # -# The recvq is the data being received FROM THE USER. # -# The names sendq and recvq are from the SERVER'S PERSPECTIVE not # -# that of the user... Just to clear up any confusion or complaints # -# that these are backwards :p # -# # - -<connect allow="196.12.*" password="secret"> -<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096"> - -<connect deny="69.254.*"> - - -#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- -# # -# Classes are a group of commands which are grouped together # -# and given a unique name. They used to define which commands # -# are available to certain types of Operators. # -# # -# Syntax is as follow: # -# <class name="name" commands="oper commands"> # -# # - -<class name="Shutdown" commands="DIE RESTART REHASH"> -<class name="ServerLink" commands="CONNECT SQUIT"> -<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE SHUN"> -<class name="OperChat" commands="WALLOPS CHATOPS"> -<class name="HostCloak" commands="SETHOST SETIDENT SETNAME"> - - -#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# -# # -# This is where you specify which types of operators you have on # -# your server, as well as the commands they are allowed to use. # -# This works alongside with the classes specified above. # -# # -# type name - a name for the combined class types # -# classes - specified above, used for flexibility for the # -# server admin to decide on which operators get # -# what commands # -# host - hostmask operators will recieve on oper-up. # -#(optional) # -# # -# Syntax is as follows: # -# <type name="name" classes="class name" host="oper hostmask"> # -# # - -<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za"> -<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za"> -<type name="LocalOp" classes="OperChat BanControl HostCloak" host="local.omega.org.za"> -<type name="Helper" classes="HostCloak" host="helper.omega.org.za"> - - -#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Opers are defined here. This is a very important section. # -# Remember to only make operators out of truthworthy people. # -# # -# name - oper name, best to use lower-case # -# password - password to oper-up, # -# encryption not supported by inspircd. However, there # -# are modules that allow for oper password encryption. # -# # -# host - host of client allowed to oper-up, more hostmasks # -# seperated by spaces, wildcards accepted # -# type - specified above, defines the kind of operator # -# # -# Syntax is as follows: # -# <oper name="login" # -# password="pass" # -# host="hostmask@of.oper" # -# type="oper type"> # -# # - -<oper name="katsklaw" - password="s3cret" - host="*@*" - type="NetAdmin"> - - -#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# Defines which servers can link to this one, and which servers this # -# server may create outbound links to. # -# # -# name - The name is the canocial name of the server, it does # -# not have to resolve - but it is expected to be sent # -# in the remote servers connection info. # -# ipaddr - Valid host or ip address for remote server. * # -# port - Valid listening UDP port for remote server. # -# sendpass - Password to send to create an outbound connection to # -# this server. # -# recvpass - Password to receive to accept an inbound connection # -# from this server. # -# autoconnect - Sets the server to autoconnect. Where x is the number # -# (optional) of seconds between attempts. 300 = 5 minutes # -# # -# to u:line a server (give it extra privilages required for running # -# services, Q, etc) you must include the <uline server> tag as shown # -# in the example below. You can have as many of these as you like. # -# # -# WARNING: Unlike other ircds, u:lining a server allows ALL users on # -# that server to operoverride modes. This should only be used for # -# services and protected oper servers! # -# # -# IMPORTANT NOTE: When specifying the ip address and/or host, the # -# server software will prioritize RESOLVED hostnames above ip # -# addresses, so for example if your target server resolves to a.b.com # -# you MUST put a.b.com into your link block, and NOT the IP address # -# of a.b.com. The system uses reverse resolution. # -# # - -<link name="hub.penguin.org" - ipaddr="penguin.box.com" - port="7000" - autoconnect="300" - sendpass="outgoing!password" - recvpass="incoming!password"> - -<link name="services.antarctic.com" - ipaddr="localhost" - port="7000" - sendpass="penguins" - recvpass="polarbears"> - -<uline server="services.antarctic.com"> - - -#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# These options let you define the path to your motd and rules # -# files. # -# # - -<files motd="/home/cc/inspircd/conf/inspire.motd" - rules="/home/cc/inspircd/conf/inspire.rules"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Define your DNS server address here. InspIRCd has its own resolver # -# and you must define this otherwise nobody's host will resolve. The # -# timeout value is in seconds. # -# # - -<dns server="127.0.0.1" timeout="5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Define the path to the PID file here. The PID file can be used to # -# rehash the ircd from the shell or to terminate the ircd from the # -# shell using shell scripts, perl scripts etc, and to monitor the # -# ircd's state via cron jobs. # -# # - -<pid file="/path/to/inspircd.pid"> - -#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Use these tags to customise the ban limits on a per channel basis. # -# the tags are read from top to bottom, and any tag found which # -# matches the channels name applies the banlimit to that channel. # -# It is advisable to put an entry with the channel as '*' at the # -# bottom of the list. If none are specified or no maxbans tag is # -# matched, the banlist size defaults to 64 entries. # -# # - -<banlist chan="#morons" limit="128"> -<banlist chan="*" limit="69"> - -#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This tag is optional, and specifies one or more commands which are # -# not available to non-operators. For example you may wish to disable # -# NICK and prevent non-opers from changing their nicknames. # -# Note that any disabled commands take effect only after the user has # -# 'registered' (e.g. after the initial USER/NICK/PASS on connection) # -# so for example disabling NICK will not cripple your network. # -# # -# <disabled commands="TOPIC MODE"> # -# # - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Just remove this... Its here to make you read ALL of the config # -# file options ;) # - -<die value="You should probably edit your config *PROPERLY* and try again."> - - - -#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Settings to define which features are useable on your server. # -# # -# prefixquit - a prefix for a client's quit message # -# loglevel - specifies what detail of messages to log in the # -# log file. You may select from debug, verbose, # -# default, sparse and none. # -# allowhalfop - allows the +h channel mode # -# noservices - If noservices is true, yes, or 1, then the first # -# user into a channel gets founder status. This is # -# only useful on networks running the m_chanprotect # -# module without services. # -# netbuffersize - size of the buffer used to receive data from # -# clients. The ircd may only read() this amount # -# of text in one go at any time. (OPTIONAL) # -# maxwho - The maximum number of results returned by a /WHO # -# query. This is to prevent /WHO being used as a # -# spam vector or means of flooding an ircd. The # -# default is 128, it is not recommended to raise it # -# above 1024. Values up to 65535 are permitted. # -# somaxconn - The maximum number of sockets that may be waiting # -# in the accept queue. This usually allows the ircd # -# to soak up more connections in a shorter space of # -# time when increased but please be aware there is a # -# system defined maximum value to this, the same way # -# there is a system defined maximum number of file # -# descriptors. Some systems may only allow this to # -# be up to 5 (ugh) while others such as FreeBSD will # -# default to a much nicer 128. # -# moduledir - This optional value indicates a runtime change of # -# the location where modules are to be found. This # -# does not add a supplementary directory. There can # -# only be one module path. # -# softlimit - This optional feature allows a defined softlimit. # -# if defined sets a soft maxconnections value, has # -# to be less than the ./configure maxclients # -# # - -<options prefixquit="Quit: " - loglevel="default" - netbuffersize="10240" - maxwho="128" - noservices="0" - somaxconn="128" - softlimit="128" - allowhalfop="yes"> - - - -#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# These tags define which modules will be loaded on startup by your # -# server. Add modules without any paths. When you make your ircd # -# using the 'make' command, all compiled modules will be moved into # -# the folder you specified when you ran ./configure. The module tag # -# automatically looks for modules in this location. # -# If you attempt to load a module outside of this location, either # -# in the config, or via /LOADMODULE, you will receive an error. # -# # -# By default, ALL modules are commented out. You must uncomment them # -# or add lines to your config to load modules. Please refer to # -# http://www.inspircd.org/wiki/Modules_List for a list of modules and# -# each modules link for any additional conf tags they require. # -# # -# WINDOWS USERS PLEASE NOTE: You can still load these modules! They # -# are incorporated into the executable and can be loaded and removed # -# similarly to if they were in a ramdisk. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Foobar module - does nothing -#<module name="m_foobar.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Chanprotect module: gives +q and +a channel modes -#<module name="m_chanprotect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Globops module: gives /GLOBOPS and usermode +g -#<module name="m_globops.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Noinvite module: Gives channel mode +V -#<module name="m_noinvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MD5 module: Allows MD5 hashed oper passwords -#<module name="m_opermd5.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels -#<module name="m_restrictchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deny Channels: Deny Channels from being used by users -#<module name="m_denychans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -#<module name="m_services.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Userip module: Adds the /USERIP command -#<module name="m_userip.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alias module: Allows you to define server-side command aliases -#<module name="m_alias.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGHOST module: Adds the /CHGHOST command -#<module name="m_chghost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HELPOP module: Provides the /HELPOP command -#<module name="m_helpop.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No kicks module: Adds the +Q channel mode -#<module name="m_nokicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MOTD module: Provides support for seperate message of the day -# on oper-up -#<module name="m_opermotd.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict message module: Allows users to only message opers -#<module name="m_restrictmsg.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Sethost module: Adds the /SETHOST command -#<module name="m_sethost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibottler module: Labels bottler leech bots -#<module name="m_antibottler.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Watch module: Adds the WATCH command, which is used by clients to -# maintain notify lists. -#<module name="m_watch.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Cloaking module: Adds usermode +x and cloaking support -#<module name="m_cloaking.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Hostchange module: Allows a different style of cloaking -#<module name="m_hostchange.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No nicks module: Adds the +N channel mode -#<module name="m_nonicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Override module: Adds support for oper override -#<module name="m_override.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAJOIN module: Adds the /SAJOIN command -#<module name="m_sajoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Set Idle module: Adds a command for opers to change their -# idle time (mainly a toy) -#<module name="m_setidle.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block colour module: Adds the +c channel mode -#<module name="m_blockcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Lusers: Shows the LUSERS output on connect -#<module name="m_conn_lusers.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ident: Provides RFC 1413 ident lookup support -#<module name="m_ident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No Notice module: adds the channel mode +T -#<module name="m_nonotice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Parking module: Adds parking support and /PARK and /UNPARK -#<module name="m_park.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAMODE module: Adds the oper /SAMODE command -#<module name="m_samode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SETNAME module: Adds the /SETNAME command -#<module name="m_setname.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Botmode module: Adds the user mode +B -#<module name="m_botmode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Filter module: Provides glob-based message filtering -#<module name="m_filter.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Knock module: adds the /KNOCK command and +K channel mode -#<module name="m_knock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper channels mode: Adds the +O channel mode -#<module name="m_operchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Random Quote module: provides a random quote on connect -#<module name="m_randquote.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SANICK module: Allows opers to change user's nicks -#<module name="m_sanick.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Show Whois module: Adds the +W usermode which allows opers -# to see when they are whois'ed -#<module name="m_showwhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Strip colour module: Adds the channel mode +S -#<module name="m_stripcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Censor module: Adds the channel mode +G -#<module name="m_censor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nick locking module: Adds the oper-only /NICKLOCK command -#<module name="m_nicklock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper Join module: Forces opers to join a channel on oper-up -#<module name="m_operjoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Redirect module: Adds channel redirection (mode +L) -#<module name="m_redirect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAPART module: Adds the oper /SAPART command -#<module name="m_sapart.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SILENCE module: Adds support for /SILENCE -#<module name="m_silence.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test command module: Does nothing significant -#<module name="m_testcommand.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel filter module: Allows channel-op defined message -# filtering using simple string matches (channel mode +g) -#<module name="m_chanfilter.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No ctcp module: Adds the channel mode +C to block CTCPs -#<module name="m_noctcp.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper levels module: Gives each oper a level and prevents -# actions being taken against higher level opers -#<module name="m_operlevels.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Remove module: Adds the /REMOVE command which is a peaceful -# alternative to /KICK -#<module name="m_remove.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) -#<module name="m_saquit.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Timed bans module: Adds timed bans and the /TBAN command -#<module name="m_timedbans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper modes module: Allows you to specify modes to add/remove on oper -#<module name="m_opermodes.so"> - - -#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_filter.so module, then # -# specfiy below the path to the filter.conf file. # - -#<filter file="/path/to/inspircd/filter.conf"> - - -#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_helpop.so module, then # -# specify below the path to the helpop.conf file. # - -<die value="If you used the helpop include above then do *NOT* use this tag."> -#<helpop file="/path/to/inspircd/helpop.conf"> - - -#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_randquotes.so module, then # -# specify below the path to the randquotes.conf file. # - -#<randquote file="/path/to/inspircd/randquotes.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# The ban tags define nick masks, host masks and ip ranges which are # -# banned from your server. All details in these tags are local to # -# Your server. # -# # -# # -# badip lines ban an ip range (same as a zline) # -# # -# ipmask - The ip range to ban (wildcards possible) # -# reason - Reason to display when disconnected # -# # -# badnick lines ban a nick mask (same as a qline) # -# # -# nick - Nick mask to ban (wildcards possible) # -# reason - Reason to display on /NICK # -# # -# badhost lines ban a user@host mask (same as a kline) # -# # -# host - ident@hostname (wildcards possible) # -# reason - Reason to display on disconnection # -# # -# exception lines define a hostmask that is excempt from [kzg]lines # -# # -# host - ident@hostname (wildcards possible) # -# reason - Reason, shown only in /stats e # -# # - -<badip ipmask="69.69.69.69" reason="No porn here thanks."> - -<badnick nick="ChanServ" reason="Reserved For Services"> -<badnick nick="NickServ" reason="Reserved For Services"> -<badnick nick="OperServ" reason="Reserved For Services"> -<badnick nick="MemoServ" reason="Reserved For Services"> - -<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots"> -<badhost host="*@localhost" reason="No irc from localhost!"> - -<exception host="*@ircop.host.com" reason="Opers hostname"> - -#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_alias.so module loaded, you may also define # -# aliases as shown below. They are commonly used to provide shortcut # -# commands to services, however they are not limited to jsut this use.# -# An alias tag requires the following values to be defined in it: # -# # -# text - The text to detect at the start of the line, # -# must be at the start of the line to trigger the # -# alias. May contain spaces, but case insensitive. # -# replace - The text to replace 'text' with. Usually this # -# will be "PRIVMSG ServiceName" or similar. # -# requires - If you provide a value for 'requires' this means # -# the given nickname MUST be online for the alias # -# to successfully trigger. If they are not, then # -# the user receives a 'no such nick' 401 numeric. # -# uline - Defining this value with 'yes', 'true' or '1' # -# will ensure that the user given in 'requires' # -# must also be on a u-lined server, as well as # -# actually being on the network. If the user is # -# online, but not on a u-lined server, then an # -# oper-alert is sent out as this is possibly signs # -# of a user trying to impersonate a service. # -# # - -<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes"> -<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes"> -<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes"> -<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# You should already know what to do here :) # - -<die value="You should probably edit your config *PROPERLY* and try again."> - - -######################################################################### -# # -# -InspIRCd Development and Coding Team- # -# www.inspircd.org # -# # -######################################################################### diff --git a/conf/inspire.motd.example b/conf/inspire.motd.example deleted file mode 100644 index 67df9d3db..000000000 --- a/conf/inspire.motd.example +++ /dev/null @@ -1,12 +0,0 @@ - - _____ _____ _____ _____ _ -|_ _| |_ _| | __ \ / ____| | | - | | _ __ ___ _ __ | | | |__) || | __| | - | | | '_ \ / __| | '_ \ | | | _ / | | / _` | - _| |_ | | | | \__ \ | |_) | _| |_ | | \ \ | |____ | (_| | -|_____| |_| |_| |___/ | .__/ |_____| |_| \_\ \_____| \__,_| - __________________| |_______________________________ - |__________________|_|_______________________________| - - Insert something funkeh here - diff --git a/conf/inspire.quotes.example b/conf/inspire.quotes.example deleted file mode 100644 index 9b2bc0f6a..000000000 --- a/conf/inspire.quotes.example +++ /dev/null @@ -1,175 +0,0 @@ -Men are from Mars. Women are from Venus. Computers are from hell -Computer /nm./: a device designed to speed and automate errors -Hardware /nm./: the part of the computer that you can kick. -Maniac /n./ An early computer built by nuts. -RAM /abr./: Rarely Adequate Memory. -Programmer /n./ A red-eyed, mumbling mammal capable of conversing with inanimate objects -Multitasking /adj./ 3 PCs and a chair with wheels -Plonk /excl./: The sound a newbie makes as he falls to the bottom of a kill file -hURL /n./: a link to a web site that makes you want to puke -SUPERCOMPUTER: what it sounded like before you bought it. -If it's really a supercomputer, how come the bullets don't bounce off when I shoot it? . The Covert Comic. -A computer is like an Old Testament god, with a lot of rules and no mercy. . Joseph Campbell -I dropped my computer on my foot! That Megahurtz!! -A computer's attention span is as long as it's power cord -586: The average IQ needed to understand a PC -Memory is like an orgasm. It's a lot better if you don't have to fake it -If it jams, force it. If it breaks, it needed replacing anyway. -A bus station is where a bus stops. A train station is where a train stops. On my desk I have a workstation.. -Want to come see my HARD DRIVE ? I promise it isn't 3.5 inches and it ain't floppy. . Geek pick-up line. -If you torture the data enough, it will confess. . Ronald Coase -If you give someone a program, you will frustrate them for a day; if you teach them how to program, you will frustrate them for a lifetime -ASCII stupid question, get a stupid ANSI! -Use the source, Luke... -Programming is an art form that fights back -MacOS, Windows, BeOS: they're all just Xerox copies -Whenever you think you have a clever programming trick... forget it! -Managing senior programmers is like herding cats. . Dave Platt -Your program is sick ! Shoot it and put it out of its memory -/* You are not expected to understand this */ -To define recursion, we must first define recursion -ERROR: Computer possessed; Load EXOR.SYS ? [Y/N] -Linux is only free if your time is worthless -Linux: find out what you've been missing while you've been rebooting Windows NT -unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep -Profanity is the one language all programmers know best -It's 5.50 a.m.... Do you know where your stack pointer is? -#define QUESTION ((bb) || !(bb)) . Shakespeare -The more I C, the less I see. -Confucius say: He who play in root, eventually kill tree. -Unix is the answer, but only if you phrase the question very carefully -C++: Hard to learn and built to stay that way -Java is, in many ways, C++-- . Michael Feldman. -They don't make bugs like Bunny anymore . Olav Mjelde -If debugging is the process of removing software bugs, then programming must be the process of putting them in -When the only tool you own is a hammer, every problem you encounter resembles a nail -System Error: press F13 to continue... -To err is human, but for a real disaster you need a computer -Computers make very fast, very accurate mistakes -Life would be so much easier if we only had the source code -Who is this 'General Failure' and why is he reading my disk? -hAS aNYONE sEEN MY cAPSLOCK kEY? -InspIRCd, now with excessive ammounts of Cheeze -I'm in the computer business, I make Out-Of-Order signs -Kevorkian Virus: helps your computer shut down whenever it wants to. - [OUT OF QUOTES, PLEASE ORDER MORE] -Error, no keyboard . press F1 to continue. -Insert Something Funkeh.. err.. There! --> -Cannot delete tmp150---3.tmp: There is not enough free disk space. Delete one or more files to free disk space, and then try again -File not found. Should I fake it ? (Y/N) -The definition of an upgrade: Take old bugs out, put new ones in -If it's not on fire, it's a software problem -My software never has bugs. It just develops random features -It's a little-known fact that the Y1K problem caused the Dark Ages -Artificial Intelligence usually beats natural stupidity -Making fun of AOL users is like making fun of the kid in the wheel chair -Daddy, why doesn't this magnet pick up this floppy disk? -Daddy, what does FORMATTING DRIVE C mean? -See daddy ? All the keys are in alphabetical order now. -If you can't beat your computer at chess, do what I did . try kick-boxing. -Enter any 11-digit prime number to continue... -ASCII and ye shall receive. -The web is a dominatrix. Every where I turn, I see little buttons ordering me to Submit. -<FrostyCoolSlug> NO, You cannot dial 999, I'm downloading my mail ;/ -640K ought to be enough for anybody. . Bill Gates, 1981 -Windows not found, [P]arty, [C]elebrate, [D]rink? -English, the Microsoft of languages... -It's been said that Bill Gates named his company after his dick... -Ever notice how fast Windows runs ? -- Neither did I -If at first you don't succeed, work for Microsoft -We are Microsoft. Resistance Is Futile. You Will Be Assimilated -"Microsoft Works." . Oxymoron -Windows isn't a virus, viruses do something -PANIC! buffer = :NickServ WRITE_DB(3). <-- JUST KIDDING! -It just keeps going and going and going and going and goi <BANG> -All that I know is that nukes are comming from 127.0.0.1 -I know all about the irc and the mirc cops. -M re ink n ed d, ple s r fil -Please refrain from feeding the IRC Operators. Thank you. -I know all about mirc stuff, hmm.. I think this channel is experiencing packet loss.. -MacDonalds claims Macintosh stole their next idea of the iMac -I can't hold her any longer, captain, she's gonna bl.. sorry, got caught up in the moment -I recommend purchasing a Cyrix CPU for testing nuclear meltdowns -Is it an international rule to have the worst picture possible on your driver license? -Have you hugged your services coder, today? -Ever wonder why they make the colon flash on alarm clocks? -Whats this?.. blue screen with a VXD error?!.. I'VE BEEN NUKED! -do-do-bop-doo-doo-do-do-doo.. For those of you who know that song, you have problems.. -be wery wery quiet... hunting wabbit... -I've been IRC Nuked"Great warrior? War does not make one great." - Yoda -"I find your lack of faith.....disturbing." - Darth Vader -"I have a bad feeling about this.."--All of the Star Wars characters. -Can I upgrade my Hard Drive to a WARP drive? -Canadian DOS prompt: EH?\> -Canadian DOS: "Yer sure, eh?" [y/n] -CONGRESS.SYS Corrupted: Re-boot Washington D.C (Y/n)? -I don't have a solution but I admire the problem. -Famous Last Words: Trust me. I know what I'm doing. -Hey Captain, I just created a black ho-÷p!%$û NO CARRIER -I like work ... I can sit and watch it for hours. -Access denied--nah nah na nah nah! -Bad command. Bad, bad command! Sit! Stay! Staaay.. -Error: Keyboard not attached. Press F1 to continue. -*grumble* "You're just supposed to sit here?" -"Hey, what's this button d..<BOOM>" -W. Crusher -"He has become One with Himself!" "He's passed out!" "That too."-B5 -For a funny quote, call back later. -Famous last words: 'You saw a WHAT around the corner?!' -I like work ... I can sit and watch it for hours. -If debugging is the process of removing bugs, then programming must be the process of putting them in. -Copywight 1994 Elmer Fudd. All wights wesewved. -Cannot find REALITY.SYS. Universe halted. -BUFFERS=20 FILES=15 2nd down, 4th quarter, 5 yards to go! -My software never has bugs. It just develops random features. -Why doesn't DOS ever say 'EXCELLENT command or filename!? -Who's General Failure & why's he reading my disk? -Shell to DOS... Come in DOS, do you copy? Shell to DOS... -Computing Definition - Network-Admin: Primary person who just got set up for the blame of the system crash. -An expert is a person who has made all the mistakes which can be made in a very narrow field. -Famous last words: This is the safe way to do it....... -Famous Last Words: Trust me. I know what I'm doing. -Clinton, "I didn't say that - er, well - yes, but I didn't mean..." -CLINTON LEGACY??...even Pharaoh had only ten plagues... -IBM I Bought McIntosh -IBM I Bring Manuals -IBM I've Been Moved -IBM Idolized By Management -IBM Impenetrable Brain Matter -IBM Imperialism By Marketing -IBM Incorrigible Boisterous Mammoth -IBM Inertia Breeds Mediocrity -IBM Ingenuity Becomes Mysterious -IBM Ingrained Batch Mentality -IBM Innovation By Management -IBM Insipid Belligerent Mossbacks -IBM Insipidly Bankrolling Millions -IBM Inspect Before Multiusing -IBM Install Bigger Memory -IBM Institution By Machiavelli -IBM Insultingly Boring Merchandisers -IBM Intellectuals Being Moronized -IBM Intelligence Belittling Meaning -IBM Intimidated, Buffaloed Management -IBM Into Building Money -IBM Intolerant of Beards & Moustaches -IBM Invest Before Multi-tasking -IBM Investigate Baffling Malodor -IBM Irresponsible Behave Multinational -IBM It Beats Mattel -IBM It's a Big Mess -IBM It's Better Manually -IBM Itty Bitty Machine -IBM Institute for Black Magic -100,000 lemmings can't be wrong. -Murphy's Eighth Law: If everything seems to be going well, you have obviously overlooked something. -Rules of the game: Do not believe in miracles - rely on them. -Rules of the game: Any given program, once running, is obsolete. -Computing Definition - Error: What someone else has made when they disagree with your computer output. -Backup not found: (A)bort (R)etry (P)anic -WinErr 653: Multitasking attempted - system confused. -Cannot join #real_life (invite only) -"Unfortunatly, no one can be told what the Matrix is. You have to see it for yourself." - Matrix -"Reality is a thing of the past" - Matrix -"The future will not be user friendly" - Matrix -"The general idea in chat is to make yourself understandable... ..." - Peer -"heh i am talkin to someone...she not dead...yet anyways" - Stinky diff --git a/conf/inspire.rules.example b/conf/inspire.rules.example deleted file mode 100644 index e51f0afd9..000000000 --- a/conf/inspire.rules.example +++ /dev/null @@ -1,3 +0,0 @@ -This is the InspIRCd rules file. - -Place any network or server rules here :) |