summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--docs/inspircd.conf.example72
1 files changed, 36 insertions, 36 deletions
diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example
index ea412d13b..2c6282583 100644
--- a/docs/inspircd.conf.example
+++ b/docs/inspircd.conf.example
@@ -307,8 +307,8 @@
#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
-# Classes are a group of commands which are grouped together #
-# and given a unique name. They used to define which commands #
+# Classes are a group of commands which are grouped together and #
+# given a unique name. They're used to define which commands #
# are available to certain types of Operators. #
# #
# Syntax is as follows: #
@@ -344,7 +344,7 @@
# your server, as well as the commands they are allowed to use. #
# This works alongside with the classes specified above. #
# #
-# type name - a name for the combined class types #
+# type name - a name for the combined class types. #
# a type name cannot contain spaces, however if you #
# put an _ symbol in the name, it will be translated #
# to a space when displayed in a WHOIS. #
@@ -379,9 +379,9 @@
#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Opers are defined here. This is a very important section. #
-# Remember to only make operators out of truthworthy people. #
+# Remember to only make operators out of trust worthy people. #
# #
-# name - oper name, This is case sensitive, so it is best to #
+# name - oper name, this is case sensitive, so it is best to #
# use lower-case. #
# #
# password - password to oper-up, also case sensitive. #
@@ -392,16 +392,16 @@
# #
# host - hosts of client allowed to oper-up. #
# wildcards accepted, seperate multiple hosts with a #
-# space. You may also specify CIDR ip addresses. #
+# space. You may also specify CIDR IP addresses. #
# #
-# fingerprint - When using the m_ssl_oper_cert.so module, you may #
+# fingerprint - when using the m_ssl_oper_cert.so module, you may #
# specify a key fingerprint here. This can be obtained #
# using the /fingerprint command whilst the module is #
# loaded, or from the notice given to you when you #
# connect to the ircd using a client certificate, #
# and will lock this oper block to only the user who #
# has that specific key/certificate pair. #
-# This enhances security a great deal, however it #
+# this enhances security a great deal, however it #
# requires that opers use clients which can send ssl #
# client certificates, if this is configured for that #
# oper. Note that if the m_ssl_oper.so module is not #
@@ -409,14 +409,14 @@
# is not loaded, this configuration option has no #
# effect and will be ignored. #
# #
-# type - Defines the kind of operator. This must match a type #
+# type - defines the kind of operator. This must match a type #
# tag you defined above, and is case sensitive. #
# #
# Syntax is as follows: #
# <oper name="login" #
# password="pass" #
# host="hostmask@of.oper" #
-# fingerprint="hexsequence" #
+# fingerprint="hexsequence" #
# type="oper type"> #
# #
@@ -431,29 +431,29 @@
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
-# name - The name is the canocial name of the server, does #
+# name - the name is the canocial name of the server, does #
# not have to resolve - but it is expected to be set #
# in the remote servers connection info. #
# #
-# ipaddr - Valid host or ip address for remote server. These #
+# ipaddr - valid host or IP address for remote server. These #
# hosts are resolved on rehash, and cached, if you #
-# specify a hostname, so if you find that your server #
+# specify a hostname; so if you find that your server #
# is still trying to connect to an old IP after you #
# have updated your dns, try rehashing and then #
# attempting the connect again. #
# #
-# port - The TCP port for the remote server. #
+# port - the TCP port for the remote server. #
# #
-# sendpass - Password to send to create an outbound connection #
+# sendpass - password to send to create an outbound connection #
# to this server. #
# #
-# recvpass - Password to receive to accept an inbound connection #
+# recvpass - password to receive to accept an inbound connection #
# from this server. #
# #
-# autoconnect - Sets the server to autoconnect. Where x is the num. #
+# autoconnect - sets the server to autoconnect. Where x is the num. #
# (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
# #
-# transport - If defined, this is a transport name implemented by #
+# transport - if defined, this is a transport name implemented by #
# another module. Transports are layers on top of #
# plaintext connections, which alter them in certain #
# ways. Currently the three supported transports are #
@@ -464,16 +464,16 @@
# link to succeed. OpenSSL and GnuTLS are link- #
# compatible with each other. #
# #
-# statshidden - When using m_spanningtree.so for linking. you may #
+# statshidden - when using m_spanningtree.so for linking. you may #
# set this to 'yes', and if you do, the IP address/ #
# hostname of this connection will NEVER be shown to #
-# any opers on the network. In /STATS c its address #
+# any opers on the network. In /stats c its address #
# will show as *@<hidden>, and during CONNECT and #
-# inbound connections, its IP will show as <hidden> #
+# inbound connections, it's IP will show as <hidden> #
# UNLESS the connection fails (e.g. due to a bad #
# password or servername) #
# #
-# allowmask - When this is defined, it indicates a range of IP #
+# allowmask - when this is defined, it indicates a range of IP #
# addresses to allow for this link (You may use CIDR #
# or wildcard form for this address). #
# e.g. if your server is going to connect to you from #
@@ -481,7 +481,7 @@
# into this value. If it is not defined, then only #
# the ipaddr field of the server shall be allowed. #
# #
-# failover - If you define this option, it must be the name of a #
+# failover - if you define this option, it must be the name of a #
# different link tag in your configuration. This #
# option causes the ircd to attempt a connection to #
# the failover link in the event that the connection #
@@ -499,28 +499,28 @@
# apply to autoconnected servers as well as manually #
# connected ones. #
# #
-# timeout - If this is defined, then outbound connections will #
+# timeout - if this is defined, then outbound connections will #
# time out if they are not connected within this many #
# seconds. If this is not defined, the default of ten #
# seconds is used. #
# #
-# bind - If you specify this value, then when creating an #
+# bind - if you specify this value, then when creating an #
# outbound connection to the given server, the IP you #
# place here will be bound to. This is for multi- #
# homed servers which may have multiple IP addresses. #
-# If you do not define this value, the first IP that #
+# if you do not define this value, the first IP that #
# is not empty or localhost from your <bind> tags #
# will be bound to. This is usually acceptable, #
# however if your server has multiple network cards #
# then you may have to manually specify the bind #
# value instead of leaving it to automatic binding. #
-# You can usually tell if you need to set this by #
+# you can usually tell if you need to set this by #
# looking for the error 'Could not assign requested #
# address' in your log when connecting to servers. #
# #
-# hidden - If this is set to true, yes, or 1, then the server #
+# hidden - if this is set to true, yes, or 1, then the server #
# is completely hidden from non-opers. It does not #
-# show in LINKS and it does not show in MAP. Also, #
+# show in /links and it does not show in /map. Also, #
# any servers which are child servers of this one #
# in the network will *also* be hidden. Use with #
# care! You can use this to 'mask off' sections of #
@@ -540,12 +540,12 @@
# #
# ------------------------------------------------------------------- #
# #
-# NOTE: If you have built your server as an ipv6 server, then when a #
-# DNS lookup of a server's host occurs, AAAA records (ipv6) are #
-# priorotized over A records (ipv4). Therefore, if the server you are #
-# connecting to has both an IPV6 ip address and an IPV4 ip address in #
-# its DNS entry, the IPV6 address will *always* be selected. To #
-# change this behaviour simply specify the IPV4 IP address rather #
+# NOTE: If you have built your server as an IPv6 server, then when a #
+# DNS lookup of a server's host occurs, AAAA records (IPv6) are #
+# priorotized over A records (IPv4). Therefore, if the server you are #
+# connecting to has both an IPv6 IP address and an IPv4 IP address in #
+# its DNS entry, the IPv6 address will *always* be selected. To #
+# change this behaviour simply specify the IPv4 IP address rather #
# than the hostname of the server. #
# #
# ------------------------------------------------------------------- #
@@ -557,7 +557,7 @@
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
-# m_spanningtree module! Please see the modules list below for #
+# m_spanningtree.so module! Please see the modules list below for #
# information on how to load this module! If you do not load this #
# module, server links will NOT work! #
# #