summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--docs/conf/inspircd.conf.example10
-rw-r--r--docs/conf/modules.conf.example44
2 files changed, 27 insertions, 27 deletions
diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf.example
index 99ae45310..cf5389d0e 100644
--- a/docs/conf/inspircd.conf.example
+++ b/docs/conf/inspircd.conf.example
@@ -304,8 +304,8 @@
# globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
globalmax="3"
- # maxconnwarn: Enable warnings when localmax or globalmax are reached (defaults to on)
- maxconnwarn="off"
+ # maxconnwarn: Enable warnings when localmax or globalmax are reached (defaults to yes)
+ maxconnwarn="no"
# resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
# in this class. This can save a lot of resources on very busy servers.
@@ -435,7 +435,7 @@
# immediately killing them; their commands are held in the recvq and processed later
# as the user's command penalty drops. Note that if this is enabled, flooders will
# quit with "RecvQ exceeded" rather than "Excess Flood".
- fakelag="on"
+ fakelag="yes"
# localmax: Maximum local connections per IP.
localmax="3"
@@ -728,13 +728,13 @@
# connections. If defined, it sets a soft max connections value.
softlimit="12800"
- # clonesonconnect: If this is set to false, we won't check for clones
+ # clonesonconnect: If this is set to no, we won't check for clones
# on initial connection, but only after the DNS check is done.
# This can be useful where your main class is more restrictive
# than some other class a user can be assigned after DNS lookup is complete.
# Turning this option off will make the server spend more time on users we may
# potentially not want. Normally this should be negligible, though.
- # Default value is true
+ # Default value is yes
clonesonconnect="yes"
# timeskipwarn: The time period that a server clock can jump by before
diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example
index 549963036..228244980 100644
--- a/docs/conf/modules.conf.example
+++ b/docs/conf/modules.conf.example
@@ -78,13 +78,13 @@
# matched, or it has no format value. Aliases are #
# read from the top of the file to the bottom. #
# #
-# usercommand - If this is true, the alias can be run simply as #
-# /ALIASNAME. Defaults to true. #
+# usercommand - If set to yes, the alias can be run simply as #
+# /ALIASNAME. Defaults to yes. #
# #
-# channelcommand - If this is true, the alias can be used as an #
+# channelcommand - If set to yes, the alias can be used as an #
# in-channel alias or 'fantasy command', prefixed #
# by the fantasy prefix character, !aliasname by #
-# default. Defaults to false. #
+# default. Defaults to no. #
# #
# format - If this is defined, the parameters of the alias #
# must match this glob pattern. For example if you #
@@ -116,11 +116,11 @@
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
# #
-# stripcolor - If this is true, the text from the user will be #
+# stripcolor - If set to yes, the text from the user will be #
# stripped of color and format codes before #
# matching against 'text'. #
# #
-# uline - Setting this to true will ensure that the user #
+# uline - Setting this to yes will ensure that the user #
# given in 'requires' is also on a U-lined server, #
# as well as actually being on the network. If the #
# user is online, but not on a U-lined server, #
@@ -128,7 +128,7 @@
# possibly a sign of a user trying to impersonate #
# a service. #
# #
-# operonly - If true, this will make the alias oper only. #
+# operonly - If yes, this will make the alias oper only. #
# If a non-oper attempts to use the alias, it will #
# appear to not exist. #
# #
@@ -340,7 +340,7 @@
#<module name="cban">
# CBAN does not allow glob channelmasks by default for compatibility
# reasons. You can enable glob support by uncommenting the next line.
-#<cban glob="true">
+#<cban glob="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds channel and user mode +G which block phrases that
@@ -1023,9 +1023,9 @@
#<module name="hidechans">
#
# This mode can optionally prevent opers from seeing channels on a +I
-# user, for more privacy if set to true.
+# user, for more privacy if set to yes.
# This setting is not recommended for most mainstream networks.
-#<hidechans affectsopers="false">
+#<hidechans affectsopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide list module: Allows for hiding the list of listmodes from users
@@ -1147,10 +1147,10 @@
# the timeout for ident lookups here. If not defined, it will default #
# to 5 seconds. This is a non-blocking timeout which holds the user #
# in a 'connecting' state until the lookup is complete. #
-# prefixunqueried: If on, the idents of users being in a connect class#
-# with ident lookups disabled (i.e. <connect useident="off">) will be #
-# prefixed with a "~". If off, the ident of those users will not be #
-# prefixed. Default is off. #
+# prefixunqueried: If yes, the idents of users in a connect class #
+# with ident lookups disabled (i.e. <connect useident="no">) will be #
+# prefixed with a "~". If no, the ident of those users will not be #
+# prefixed. Default is no. #
#
#<ident timeout="5" prefixunqueried="no">
@@ -1176,7 +1176,7 @@
# The following block can be used to control which extensions are
# enabled. Note that extended-join can be incompatible with delayjoin
# and host cycling.
-#<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">
+#<ircv3 accountnotify="yes" awaynotify="yes" extendedjoin="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 account-tag module. Adds the 'account' tag which contains the
@@ -1591,8 +1591,8 @@
#<module name="operlog">
#
# If the following option is on then all oper commands will be sent to
-# the snomask 'r'. The default is off.
-#<operlog tosnomask="off">
+# the snomask 'r'. The default is no.
+#<operlog tosnomask="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper prefixing module: Adds a channel prefix mode +y which is given
@@ -1731,8 +1731,8 @@
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
# If you want to do this, set the filename below, and uncomment the include.
#
-# If 'listmodes' is true then all list modes (+b, +I, +e, +g...) will be
-# saved. Defaults to false.
+# If 'listmodes' is yes then all list modes (+b, +I, +e, +g...) will be
+# saved. Defaults to no.
#
# 'saveperiod' determines how often to check if the database needs to be
# saved to disk. Defaults to every five seconds.
@@ -1844,8 +1844,8 @@
# in the same way as /REMOVE.
#<module name="remove">
#
-# supportnokicks: If true, /REMOVE is not allowed on channels where the
-# nokicks (+Q) mode is set. Defaults to false.
+# supportnokicks: If yes, /REMOVE is not allowed on channels where the
+# nokicks (+Q) mode is set. Defaults to no.
# protectedrank: Members having this rank or above may not be /REMOVE'd
# by anyone. Set to 0 to disable this feature. Defaults to 50000.
#<remove supportnokicks="yes" protectedrank="50000">
@@ -2327,7 +2327,7 @@
#<module name="svshold">
# SVSHOLD does not generate server notices by default, you can turn
# notices on by uncommenting the next line.
-#<svshold silent="false">
+#<svshold silent="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitrary lines to user WHOIS.