summaryrefslogtreecommitdiff
path: root/docs/inspircd.conf.example
diff options
context:
space:
mode:
authorRobin Burchell <viroteck@viroteck.net>2012-05-30 02:46:30 -0700
committerRobin Burchell <viroteck@viroteck.net>2012-05-30 02:46:30 -0700
commitcb9740f15157b2c32d4bd8ca9d43ae06f98aa963 (patch)
tree1d6e29fc66b1eef1dbb5340b84bc70b55d3fd0aa /docs/inspircd.conf.example
parent3699b0fb216b16b96ba941f33471fcc52e135f50 (diff)
parent8c7aeaf59576e89a376d2ab8a72c1e447d4975d3 (diff)
Merge pull request #166 from Robby-/insp20-cfgcorrections
[2.0] Add more documentation about logging, aswell as make text, tab and space corrections to the configs.
Diffstat (limited to 'docs/inspircd.conf.example')
-rw-r--r--docs/inspircd.conf.example79
1 files changed, 50 insertions, 29 deletions
diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example
index a820d4a40..d1293be25 100644
--- a/docs/inspircd.conf.example
+++ b/docs/inspircd.conf.example
@@ -160,7 +160,7 @@
# for ssl to work. If you do not want this bind section to support ssl,
# just remove or comment out this option.
ssl="gnutls"
- >
+>
<bind address="" port="6660-6669" type="clients">
@@ -390,7 +390,7 @@
# #
<cidr
- # ipv4clone: specifies how many bits of an IP address should be
+ # ipv4clone: specifies how many bits of an IP address should be
# looked at for clones. The default only looks for clones on a
# single IP address of a user. You do not want to set this
# extremely low. (Values are 0-32).
@@ -489,9 +489,9 @@
# Note that any disabled commands take effect only after the user has #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
-# #
+# #
# You can also define if you want to disable any channelmodes #
-# or usermodes from your users. #
+# or usermodes from your users. #
# #
# `fakenonexistant' will make the ircd pretend that nonexistant #
# commands simply don't exist to non-opers ("no such command"). #
@@ -548,10 +548,10 @@
# without cycling them.
cyclehosts="yes"
- # cyclehostsfromuser: If enabled, the source of the mode change for
- # cyclehosts will be the user who cycled. This can look nicer, but
- # triggers anti-takeover mechanisms of some obsolete bots.
- cyclehostsfromuser="no"
+ # cyclehostsfromuser: If enabled, the source of the mode change for
+ # cyclehosts will be the user who cycled. This can look nicer, but
+ # triggers anti-takeover mechanisms of some obsolete bots.
+ cyclehostsfromuser="no"
# ircumsgprefix: Use undernet-style message prefixing for NOTICE and
# PRIVMSG. If enabled, it will add users' prefix to the line, if not,
@@ -562,15 +562,15 @@
# in channel will be sent a NOTICE about it.
announcets="yes"
- # allowmismatched: Setting this option to yes will allow servers to link even
- # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
- # yes may introduce some desyncs and weirdness.
- allowmismatched="no"
+ # allowmismatched: Setting this option to yes will allow servers to link even
+ # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
+ # yes may introduce some desyncs and weirdness.
+ allowmismatched="no"
- # defaultbind: Sets the default for <bind> tags without an address. Choices are
- # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
- # falling back to IPv4 otherwise.
- defaultbind="auto"
+ # defaultbind: Sets the default for <bind> tags without an address. Choices are
+ # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
+ # falling back to IPv4 otherwise.
+ defaultbind="auto"
# hostintopic: If enabled, channels will show the host of the topicsetter
# in the topic. If set to no, it will only show the nick of the topicsetter.
@@ -592,9 +592,9 @@
# moronbanner: This is the text that is sent to a user when they are
# banned from the server.
moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
-
- # exemptchanops: exemptions for channel access restrictions based on prefix.
- exemptchanops="nonick:v flood:o"
+
+ # exemptchanops: exemptions for channel access restrictions based on prefix.
+ exemptchanops="nonick:v flood:o"
# invitebypassmodes: This allows /invite to bypass other channel modes.
# (Such as +k, +j, +l, etc)
@@ -694,11 +694,11 @@
# the ircd. This may be set for security reasons or vanity reasons.
customversion=""
- # operspywhois: show opers (users/auspex) the +s channels a user is in. Values:
- # splitmsg Split with an explanatory message
- # yes Split with no explanatory message
- # no Do not show
- operspywhois="no"
+ # operspywhois: show opers (users/auspex) the +s channels a user is in. Values:
+ # splitmsg Split with an explanatory message
+ # yes Split with no explanatory message
+ # no Do not show
+ operspywhois="no"
# runasuser: If this is set, InspIRCd will attempt to setuid
# to run as this user- allows binding of ports under 1024.
@@ -782,19 +782,40 @@
# to do what they want.
#
# An example log tag would be:
-# <log method="file" type="OPER" level="default" target="opers.log">
-# which would log all information on /oper (failed and successful) to
+# <log method="file" type="OPER" level="default" target="opers.log">
+# which would log all information on /oper (failed and successful) to
# a file called opers.log.
#
# There are many different types which may be used, and modules may
# generate their own. A list of useful types:
-# - USERS - information relating to user connection and disconnection
-# - CHANNELS - information relating to joining and parting of channels.
-# XXX someone doc more on this
+# - USERS - information relating to user connection and disconnection
+# - OPER - succesful and failed oper attempts
+# - KILL - kill related messages
+# - snomask - server notices (*all* snomasks will be logged)
+# - FILTER - messages related to filter matches (m_filter)
+# - CONFIG - configuration related messages
+# - COMMAND - die and restart messages, and messages related to unknown user types
+# - SOCKET - socket engine informational/error messages
+# - MODULE - module related messages
+# - STARTUP - messages related to starting up the server
#
# You may also log *everything* by using a type of *, and subtract things out
# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
#
+# Useful levels are:
+# - default (general messages, including errors)
+# - sparse (misc error messages)
+# - debug (debug messages)
+#
+# Some types only produce output in the debug level, those are:
+# - BANCACHE - ban cache debug messages
+# - CHANNELS - information relating to joining/creating channels
+# - CULLLIST - debug messages related to issues with removing users
+# - RESOLVER - DNS related debug messages
+# - CONNECTCLASS - Connection class debug messages
+# - USERINPUT
+# - USEROUTPUT
+#
# The following log tag is highly default and uncustomised. It is recommended you
# sort out your own log tags. This is just here so you get some output.