summaryrefslogtreecommitdiff
path: root/docs/inspircd.conf.example
diff options
context:
space:
mode:
authorbrain <brain@e03df62e-2008-0410-955e-edbf42e46eb7>2006-08-04 01:59:41 +0000
committerbrain <brain@e03df62e-2008-0410-955e-edbf42e46eb7>2006-08-04 01:59:41 +0000
commitf25755bbe748f65eb17f8e25507160569f8f4041 (patch)
tree31c4e662f99cd6e2b3c38ab01b32c55a29f9f3eb /docs/inspircd.conf.example
parente5843dde4dda51de3160de62b7b8811cb9465d1b (diff)
Change to using userrec::ip as a sockaddr to store port, ip and address family, rather than userrec::ip4 and userrec::port.
This allows us to handle remote ipv6 users on an ipv4 server, and vice versa. git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@4694 e03df62e-2008-0410-955e-edbf42e46eb7
Diffstat (limited to 'docs/inspircd.conf.example')
-rw-r--r--docs/inspircd.conf.example31
1 files changed, 29 insertions, 2 deletions
diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example
index 1e49fae93..34852bf4a 100644
--- a/docs/inspircd.conf.example
+++ b/docs/inspircd.conf.example
@@ -108,6 +108,12 @@
# <bind address="ip or host" port="port" type="clients"> #
# <bind address="ip or host" port="port" type="servers"> #
# #
+# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
+# then you must specify your IPV6 clients in the following form: #
+# ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the #
+# port on. If InspIRCd is built for IPV4 connections (this is the #
+# default) then you do not need to prefix your addresses like this. #
+# #
<bind address="" port="6660" type="clients">
<bind address="" port="7000" type="servers">
@@ -214,6 +220,7 @@
<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" localmax="3" globalmax="3">
<connect deny="69.254.*">
+<connect deny="3ffe:*">
#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
@@ -354,6 +361,12 @@
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
+# NOTE: If you have built InspIRCd with IPV6 support, and you want #
+# to link to an IPV4 server, you must specify the IP address in the #
+# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
+# server. If you have built InspIRCd for IPV4 (this is the default) #
+# you should not prefix your IP addresses in this fashion. #
+# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
@@ -414,9 +427,22 @@
# resolving even though the DNS server appears to be up! Most ISP and #
# hosting provider DNS servers support recursive lookups. #
# #
+# NOTE: If you have built InspIRCd with IPV6 support, and you want #
+# to use an IPV4 nameserver, you must specify the IP address in the #
+# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
+# server. If you have built InspIRCd for IPV4 (this is the default) #
+# you should not prefix your IP addresses in this fashion. #
+# #
+# IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING #
+# IPV6, YOU MUST DEFINE THE <DNS SERVER> TAG, AND USE THE ::FFFF #
+# PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. #
+# #
<dns server="127.0.0.1" timeout="5">
+# An example of using IPV4 nameservers over IPV6
+#<dns server="::ffff:127.0.0.1" timeout="5">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define the path to the PID file here. The PID file can be used to #
@@ -449,8 +475,8 @@
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
# #
-# <disabled commands="TOPIC MODE"> #
-# #
+
+#<disabled commands="TOPIC MODE">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -471,6 +497,7 @@
# loglevel - specifies what detail of messages to log in the #
# log file. You may select from debug, verbose, #
# default, sparse and none. #
+# #
# allowhalfop - allows the +h channel mode #
# #
# noservices - If noservices is true, yes, or 1, then the first #