Split example conf into example conf and modules conf, include modules conf from the main example. This should provide a slightly less heavy introduction to things.

git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@9970 e03df62e-2008-0410-955e-edbf42e46eb7

2 files changed, 1451 insertions, 1439 deletions

diff --git a/conf/inspircd.conf.example b/conf/inspircd.conf.example
index 32e36ba4a..fa32053d9 100644
--- a/conf/inspircd.conf.example
+++ b/conf/inspircd.conf.example
@@ -1150,1445 +1150,6 @@
 #        maxgroups="100000"                                           #
 #        maxkeep="3d">                                                #
 
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-  MODULE OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-#  These tags define which modules will be loaded on startup by your  #
-#  server. Add modules without any paths. When you make your ircd     #
-#  using the 'make' command, all compiled modules will be moved into  #
-#  the folder you specified when you ran ./configure. The module tag  #
-#  automatically looks for modules in this location.                  #
-#  If you attempt to load a module outside of this location, either   #
-#  in the config, or via /LOADMODULE, you will receive an error.      #
-#                                                                     #
-#  By default, ALL modules are commented out. You must uncomment them #
-#  or add lines to your config to load modules. Please refer to       #
-#  http://www.inspircd.org/wiki/Modules_List for a list of modules and#
-#  each modules link for any additional conf tags they require.       #
-#                                                                     #
-#  You may use wildcards in a <module> tag to load all modules which  #
-#  match a glob pattern (e.g. m_sa????.so would load m_sajoin,        #
-#  m_sapart, m_saquit and m_sanick)                                   #
-#                                                                     #
-#    ____                _   _____ _     _       ____  _ _   _        #
-#   |  _ \ ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
-#   | |_) / _ \/ _` |/ _` |   | | | '_ \| / __| |  _ \| | __| |       #
-#   |  _ <  __/ (_| | (_| |   | | | | | | \__ \ | |_) | | |_|_|       #
-#   |_| \_\___|\__,_|\__,_|   |_| |_| |_|_|___/ |____/|_|\__(_)       #
-#                                                                     #
-# To link servers to InspIRCd, you MUST load the m_spanningtree       #
-# module, as shown below. If you DO NOT do this, server links will    #
-# NOT work at all. ie. The ports will NOT bind, and /connect will not #
-# work properly. This is by design, to allow for the implementation   #
-# of other linking protocols in modules in the future.                #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Spanning Tree module - allows linking of servers using the spanning
-# tree protocol (see the READ THIS BIT section above).
-#
-#<module name="m_spanningtree.so">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MD5 Module - Allows other modules to generate MD5 hashes, usually for
-# cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules such as m_cloaking.so and m_password_hash.so may rely on
-# this module being loaded to function.
-#
-#<module name="m_md5.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SHA256 Module - Allows other modules to generate SHA256 hashes,
-# usually for cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules such as m_password_hash.so may rely on this module being
-# loaded to function. Certain modules such as m_spanningtree.so will
-# function without this module but when it is loaded their features will
-# be enhanced (for example the addition of HMAC authentication).
-#
-#<module name="m_sha256.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
-# usually for cryptographic uses and security.
-# 
-# IMPORTANT:
-# Other modules may rely on this module being loaded to function.
-#<module name="m_ripemd160.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Abbreviation module: Provides the ability to abbreviate commands a-la 
-# BBC BASIC keywords.
-#<module name="m_abbreviation.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Alias module: Allows you to define server-side command aliases
-#<module name="m_alias.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  ALIAS DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you have the m_alias.so module loaded, you may also define       #
-# aliases as shown below. They are commonly used to provide shortcut  #
-# commands to services, however they are not limited to just this use.#
-# An alias tag requires the following values to be defined in it:     #
-#                                                                     #
-# text        -      The text to detect as the actual command line,   #
-#                    Cant contain spaces, but case insensitive.       #
-#                    You may have multiple aliases with the same      #
-#                    command name (text="" value), however the first  #
-#                    found will be executed if its format value is    #
-#                    matched, or it has no format value. Aliases are  #
-#                    read from the top of the file to the bottom.     #
-#                                                                     #
-# format      -      If this is defined, the parameters of the alias  #
-#                    must match this glob pattern. For example if you #
-#                    want the first parameter to start with a # for   #
-#                    the alias to be executed, set format="#*" in the #
-#                    alias definition. Note that the :'s which are    #
-#                    part of IRC formatted lines will be preserved    #
-#                    for matching of this text. This value is         #
-#                    optional.                                        #
-#                                                                     #
-# replace     -      The text to replace 'text' with. Usually this    #
-#                    will be "PRIVMSG ServiceName :$2-" or similar.   #
-#                    You may use the variables $1 through $9 in the   #
-#                    replace string, which refer to the first through #
-#                    ninth word in the original string typed by the   #
-#                    user. You may also use $1- through $9- which     #
-#                    refer to the first word onwards, through to the  #
-#                    ninth word onwards, e.g. if the user types the   #
-#                    command "foo bar baz qux quz" then $3- will hold #
-#                    "baz qux quz" and $2 will contain "bar". You may #
-#                    also use the special variables: $nick, $ident,   #
-#                    $host and $vhost, and you may separate multiple  #
-#                    commands with \n. If you wish to use the ACTUAL  #
-#                    characters \ and n together in a line, you must  #
-#                    use the sequence "\\n".                          #
-#                                                                     #
-# requires    -      If you provide a value for 'requires' this means #
-#                    the given nickname MUST be online for the alias  #
-#                    to successfully trigger. If they are not, then   #
-#                    the user receives a 'no such nick' 401 numeric.  #
-#                                                                     #
-# uline       -      Defining this value with 'yes', 'true' or '1'    #
-#                    will ensure that the user given in 'requires'    #
-#                    must also be on a u-lined server, as well as     #
-#                    actually being on the network. If the user is    #
-#                    online, but not on a u-lined server, then an     #
-#                    oper-alert is sent out as this is possibly signs #
-#                    of a user trying to impersonate a service.       #
-#                                                                     #
-# operonly    -      Defining this value, with a value of 'yes', '1'  #
-#                    or true will make the alias oper only. If a non- #
-#                    oper attempts to use the alias, it will appear   #
-#                    to not exist.                                    #
-#                                                                     #
-#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#
-# An example of using the format value to create an alias with two
-# different behaviours depending on the format of the parameters.
-#
-#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
-#  requires="ChanServ" uline="yes">
-#
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
-#  requires="NickServ" uline="yes">
-#
-# This alias fixes a glitch in xchat 2.6.x and above and the way it
-# assumes IDENTIFY must be prefixed by a colon (:) character. It should
-# be placed ABOVE the default NICKSERV alias (the first example) listed
-# above.
-#
-#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
-#  requires="NickServ" uline="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Alltime module: Shows time on all connected servers at once
-#<module name="m_alltime.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibear security module: Prevents 'bear.txt' based trojans from
-# connecting to your network by sending them a numeric they can't handle.
-#<module name="m_antibear.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibottler module: Labels bottler leech bots
-#<module name="m_antibottler.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Auditorium module: Adds channel mode +u which makes everyone else
-# except you in the channel invisible, used for large meetings etc.
-#<module name="m_auditorium.so">
-#
-# Auditorium settings:
-#
-#<auditorium showops="no" operoverride="no">
-#
-# showops:
-#   Setting this value to yes makes m_auditorium behave like unrealircd
-#   +u channel mode, e.g. ops see users joining, parting, etc, and users
-#   joining the channel see the ops. Without this flag, the mode acts
-#   like ircnet's +a (anonymous channels), showing only the user in the
-#   names list, and not even showing the ops in the list, or showing the
-#   ops that the user has joined.
-# operoverride:
-#   Setting this value to yes makes m_auditorium affect the userlist for
-#   regular users only. Opers will view all users in the channel normally.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban except module: Adds support for channel ban exceptions (+e)
-#<module name="m_banexception.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban redirection module: Allows bans which redirect to a specified
-# channel. e.g. +b nick!ident@host#channelbanneduserissentto
-#<module name="m_banredirect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block amsg module: Attempt to block all usage of /amsg and /ame
-#<module name="m_blockamsg.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  BLOCKAMSG CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you have the m_blockamsg.so module loaded, you can configure it  #
-# with the <blockamsg> tag:                                           #
-#                                                                     #
-# delay          -   How many seconds between two messages to force   #
-#                    them to be recognised as unrelated.              #
-# action         -   Any of 'notice', 'noticeopers', 'silent', 'kill' #
-#                    or 'killopers'. Define how to take action when   #
-#                    a user uses /amsg or /ame.                       #
-#
-#<blockamsg delay="3" action="killopers">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block CAPS module: Blocking all-CAPS messages with cmode +B
-#<module name="m_blockcaps.so">
-#                                                                     #
-#-#-#-#-#-#-#-#-#-#-#-  BLOCKCAPS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# percent        - How many percent of text must be caps before text  #
-#                  will be blocked.                                   #
-#                                                                     #
-# minlen         - The minimum length a line must be for the block    #
-#                  percent to have any effect.                        #
-#                                                                     #
-# capsmap        - A list of chars to be considered CAPS, this was    #
-#                  you can add CAPS for your language. Also you can   #
-#                  add things like ! and space to further lock down   #
-#                  on caps usage.                                     #
-#<blockcaps percent="50"
-#           minlen="5"
-#           capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block colour module: Blocking colour-coded messages with cmode +c
-#<module name="m_blockcolor.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Botmode module: Adds the user mode +B
-#<module name="m_botmode.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CallerID module: Adds usermode +g which activates hybrid-style 
-# callerid (== block all private messages unless you /accept first)
-#<module name="m_callerid.so">
-# 
-#-#-#-#-#-#-#-#-#-#-#- CALLERID  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# maxaccepts     - Maximum number of entires a user can add to his    #
-#                  /accept list. Default is 16 entries.               #
-# operoverride   - Can opers (note: ALL opers) ignore callerid mode?  #
-#                  Default is no.                                     #
-# tracknick      - Preserve /accept entries when a user changes nick? #
-#                  If no (the default), the user is removed from      #
-#                  everyone's accept list if he changes nickname.     #
-# cooldown       - Amount of time (in seconds) that must pass since   #
-#                  the last notification sent to a user before he can #
-#                  be sent another. Default is 60 (1 minute).         #
-#<callerid maxaccepts="16"
-#          operoverride="no"
-#          tracknick="no"
-#          cooldown="60"
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CAP module: Provides the CAP negotiation mechanism seen in
-# ratbox-derived ircds
-#<module name="m_cap.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CBAN module: Lets you disallow channels from being used at runtime.
-#<module name="m_cban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Censor module: Adds the channel mode +G
-#<module name="m_censor.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  CENSOR  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you specify to use the m_censor module, then you must #
-# specify some censor tags. See also:                                 #
-# http://www.inspircd.org/wiki/Censor_Module                          #
-#
-#<include file="censor.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="m_cgiirc.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you specify to use m_cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
-#
-# Set to yes if you want to notice opers when CGI clients connect
-# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.mysite.com">       # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.mysite.com">  # See the docs
-# New style:
-# <cgihost type="webirc" pass="foobar"
-#   mask="somebox.mysite.com">                      # Get IP from WEBIRC
-#
-# IMPORTANT NOTE:
-# ---------------
-#
-# When you connect CGI:IRC clients, there are two connect classes which
-# apply to these clients. When the client initially connects, the connect
-# class which matches the cgi:irc site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
-# real IP is then checked. You may set this class to a lower value, so that
-# the real IP of the client can still be restricted to, for example, 3
-# sessions maximum.
-#
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel create module: Adds snomask +j, which will notify opers of
-# any new channels that are created
-#<module name="m_chancreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel filter module: Allows channel-op defined message
-# filtering using simple string matches (channel mode +g)
-#<module name="m_chanfilter.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Chanprotect module: gives +q and +a channel modes
-#<module name="m_chanprotect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Check module: gives /check
-# Check is useful for looking up information on channels,
-# users, IP addresses and hosts.
-#<module name="m_check.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGHOST module: Adds the /CHGHOST command
-#<module name="m_chghost.so">
-#
-#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST  CONFIGURATION #-#-#-#-#-#-#-#-#
-# Optional - If you want to use special chars for hostnames you can  #
-# specify your own custom list of chars with the <hostname> tag:     #
-#                                                                    #
-# charmap        - A list of chars accepted as valid by the /CHGHOST #
-#                  and /SETHOST commands. Also note that the list is # 
-#                  case-sensitive.                                   #
-#<hostname charmap="abcdefghijklmnopqrstuvwxyz.-_/0123456789">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGIDENT module: Adds the /CHGIDENT command
-#<module name="m_chgident.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGNAME module: Adds the /CHGNAME command
-#<module name="m_chgname.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support.
-# Relies on the module m_md5.so being loaded before m_cloaking.so in
-# the configuration file.
-#<module name="m_cloaking.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CLOAKING  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you specify the m_cloaking.so module as above, you    #
-# must define cloak keys, and optionally a cloak prefix as shown      #
-# below. When using cloaking, the cloak keys are MANDITORY and must   #
-# be included. However, if prefix is not included, it will default    #
-# to your networks name from the <server> tag. You can also include   #
-# the following optional values:                                      #
-#                                                                     #
-#   ipalways         - Always cloak the IP address, not the hostname, #
-#                      which doesn't reveal the user's ISP, but       #
-#                      results in hosts that are harder to read and   #
-#                      ban.                                           #
-#                                                                     #
-#   lowercase        - Display the cloaked hostnames in lowercase     #
-#                      characters instead of uppercase                #
-#                                                                     #
-# <cloak key1="0x2AF39F40"                                            #
-#        key2="0x78E10B32"                                            #
-#        key3="0x4F2D2E82"                                            #
-#        key4="0x043A4C81"                                            #
-#        prefix="mynet"                                               #
-#        ipalways="false"                                             #
-#        lowercase="false">                                           #
-#                                                                     #
-# Please note that the key values will accept any number, and should  #
-# be large numbers. Using small numbers such as "7" or "1924" will    #
-# seriously weaken the security of your cloak. It is recommended you  #
-# use hexdecimal numbers prefixed by "0x", as shown in this example,  #
-# with each key eight hex digits long.                                #
-
-#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Close module: Allows an oper to close all unregistered connections.
-#<module name="m_close.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Clones module: Adds an oper command /CLONES for detecting cloned
-# users. Warning: This module may be resource intensive when its
-# command is issued, use with care.
-#<module name="m_clones.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Common channels module: Adds user mode +c, which, when set, requires
-# that users must share a common channel with you to PRIVMSG or NOTICE
-# you.
-#<module name="m_commonchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Join: Allows you to force users to join one or more channels
-# automatically upon connecting to the server.
-#<module name="m_conn_join.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#
-# If you have m_conn_join.so loaded, you can configure it using the
-# follow values:
-#
-#<autojoin channel="#one,#two,#three">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Usermodes: Set modes on users when they connect
-# When this module is loaded <connect:allow> tags may have an optional
-# modes="" value, which contains modes to add or remove from users
-# when they connect to the server.
-#<module name="m_conn_umodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Wait-for-Pong: Don't let a user connect until they PONG
-#<module name="m_conn_waitpong.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-   WAITPONG CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you have the m_conn_waitpong.so module loaded, configure it with #
-# the <waitpong> tag:                                                 #
-#                                                                     #
-# sendsnotice    -   Whether to send a snotice on connect, like other #
-#                    older ircds                                      #
-#                                                                     #
-# killonbadreply -   Whether to kill the user if they send the wrong  #
-#                    PONG reply.                                      #
-#                                                                     #
-#<waitpong sendsnotice="yes" killonbadreply="yes">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel cycle module. Server side /hop, with +ilk etc bypass.
-#<module name="m_cycle.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connectban: Provides per-IP connection throttling. Any IP that disconnects
-# too many times (configurable) in an hour is zlined for a (configurable)
-# duration, and their count resets to 0.
-#
-# NOTE: This module may change name/behaviour later in 1.2. Please make sure
-# you read release announcements!
-#
-#<connectban threshold="10" duration="10m">
-# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
-#
-#<module name="m_connectban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection throttle module. Configuration:
-#<module name="m_connflood.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#  seconds, maxconns -  Amount of connections per <seconds>.
-#
-#  timeout           -  Time to wait after the throttle was activated
-#                       before deactivating it. Be aware that the time
-#                       is seconds + timeout.
-#
-#  quitmsg           -  The message that users get if they attempt to
-#                       connect while the throttle is active.
-#
-#  bootwait          -  Amount of time to wait before enforcing the
-#                       throttling when the server just booted.
-#
-#<connflood seconds="30" maxconns="3" timeout="30"
-#   quitmsg="Throttled" bootwait="10">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom title module: Adds the /TITLE command which allows for trusted
-#                      users to gain a custom whois line and a optional
-#                      vhost can be specified.
-#<module name="m_customtitle.so">
-#
-#-#-#-#-#-#-#-#-#-#-  CUSTOM TITLE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#
-#  name              - The username used to identify 
-#  password          - The password used to identify
-#  host              - Allowed hostmask [optional]
-#  title             - Title shown in whois
-#  vhost             - Displayed host [optional]
-#
-#<title name="foo" password="bar" title="Official Chat Helper">
-#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DCCALLOW module: Adds the /DCCALLOW command
-#<module name="m_dccallow.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  DCCALLOW CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#  blockchat         - Whether to block DCC CHAT as well as DCC SEND
-#  length            - Default duration of entries in DCCALLOW list
-#  action            - Default action to take if no action is specified
-#                      can be 'block' or 'allow'
-#
-# File configuration:
-#  pattern           - The glob pattern to match against
-#  action            - Action to take if a user attempts to send a file
-#                      that matches this pattern, can be 'block' or 'allow'
-#
-#<dccallow blockchat="yes" length="5m" action="block">
-#<banfile pattern="*.exe" action="block">
-#<banfile pattern="*.txt" action="allow">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deaf module: adds support for ircu style usermode +d - deaf to
-# channel messages and channel notices.
-#<module name="m_deaf.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Delay join module: Adds the channel mode +D which delays all JOIN
-# messages from users until they speak. If they quit or part before
-# speaking, their quit or part message will not be shown to the channel
-# which helps cut down noise on large channels in a more friendly way
-# than the auditorium mode. Only channel ops may set the +D mode.
-#<module name="m_delayjoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deny Channels: Deny Channels from being used by users
-#<module name="m_denychans.so"> 
-#
-#-#-#-#-#-#-#-#-#-#-#-   DENYCHAN DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you have the m_denychans.so module loaded, you need to specify   #
-# the channels to deny:                                               #
-#                                                                     #
-# name        -      The channel name to deny. (glob masks are ok)    #
-#                                                                     #
-# allowopers  -      If operators are allowed to override the deny.   #
-#                                                                     #
-# reason      -      Reason given for the deny.                       #
-#                                                                     #
-# redirect    -      Redirect the user to a different channel         #
-#                                                                     #
-#<badchan name="#gods*" allowopers="yes" reason="Tortoises!">         #
-#<badchan name="#heaven" redirect="#hell" reason="Nice try!">         #
-#                                                                     #
-# Redirects will not work if the target channel is set +L.            #
-#                                                                     #
-# Additionally, you may specify channels which are allowed, even if   #
-# a badchan tag specifies it would be denied:                         #
-#<goodchan name="#godsleeps">                                         #
-# Glob masks are accepted here also.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice Module: Let users devoice themselves.
-#<module name="m_devoice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DNS Blacklist Module: Provides support for looking up IPs on one or #
-# more blacklists.                                                    #
-#<module name="m_dnsbl.so">                                           #
-#                                                                     #
-# For configuration options please see the wiki page for m_dnsbl at   #
-# http://inspircd.org/wiki/DNS_Blacklist_Module                       #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Filter module: Provides glob-based message filtering
-#<module name="m_filter.so">
-# OR
-# PCRE filter module: Filters messages using regular expressions
-#<module name="m_filter_pcre.so">
-#
-# You may only use one or the other with these modules, network-wide.
-#
-#-#-#-#-#-#-#-#-#-#-#-  FILTER  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you specify to use the m_filter or m_filter_pcre      #
-# modules, then specfiy below the path to the filter.conf file,       #
-# or define some <filter> tags.                                       #
-#                                                                     #
-#<include file="filter.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module: does nothing - historical relic
-#<module name="m_foobar.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GeoIP module: Allows the server admin to ban users by country code.
-#<module name="m_geoip.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#  GEOIP CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# <geoip banunknown="false">                                          #
-#                                                                     #
-# Set this value to true or yes to block unknown IP ranges which are  #
-# not in the database (usually LAN addresses, localhost, etc)         #
-#                                                                     #
-# <geoban country="TR" reason="This country not permitted">           #
-#                                                                     #
-# Use one or more of these tags to ban countries by country code.     #
-# The country code must be in capitals and should be an ISO country   #
-# code such as TR, GB, or US.                                         #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Globops module: gives /GLOBOPS and usermode +g
-#<module name="m_globops.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Global load module: Allows loading and unloading of modules network-
-# wide (USE WITH EXTREME CAUTION!)
-#<module name="m_globalload.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HELPOP module: Provides the /HELPOP command
-#<module name="m_helpop.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-  HELPOP  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you specify to use the m_helpop.so module, then       #
-# specify below the path to the helpop.conf file, or if you like to   #
-# make a mess, define your helpop tags in this conf.                  #
-#                                                                     #
-#<include file="helpop.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDECHANS module: Allows opers to hide their channels list from non-
-# opers by setting user mode +I on themselves.
-# <module name="m_hidechans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDEOPER module: Allows opers to hide their oper status from non-
-# opers by setting user mode +H on themselves.
-# <module name="m_hideoper.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Hostchange module: Allows a different style of cloaking
-#<module name="m_hostchange.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  HOSTCHANGE  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you choose to use the m_hostchange.so module.         #
-# Config Help -  See http://www.inspircd.org/wiki/Host_Changer_Module #
-#                                                                     #
-#<host suffix="polarbears.org" separator="." prefix="">
-#<hostchange mask="*@fbi.gov" action="addnick">
-#<hostchange mask="*r00t@*" action="suffix">
-#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
-#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# httpd module: Provides http server support for InspIRCd
-#<module name="m_httpd.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-  HTTPD   CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you choose to use the m_httpd.so module,  then you must
-# specify the port number and other details of your http server:
-#
-#<http ip="192.168.1.10" host="brainwave" port="32006"
-#      index="/home/brain/inspircd/http/index.html">
-#
-# You may have as many of these tags as you wish, each with a different
-# IP, port, host or index file. Each one will act as an independent
-# HTTP server.
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http ACL module: Provides access control lists for m_httpd dependent
-# modules. Use this module to restrict pages by IP address and by
-# password.
-#
-#<module name="m_httpd_acl.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#
-# Restrict access to the m_httpd_stats module to all but the local
-# network and when the correct password is specified:
-#
-# <httpdacl path="/stats*" types="password,whitelist"
-#    username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
-# 
-# Deny all connections to all but the main index page:
-#
-# <httpdacl path="/*" types="blacklist" blacklist="*">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http config module: Allows the server's configuration to be viewed
-# over HTTP. Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_config.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http stats module: Provides basic stats pages over HTTP
-# Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_stats.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-#
-#<httpstats stylesheet="http://remote.style/sheet.css">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ident: Provides RFC 1413 ident lookup support
-#<module name="m_ident.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-   IDENT CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you are using the m_ident.so module, then you can     #
-# specify the timeout for ident lookups here. If not defined, it will #
-# default to one second. This is a non-blocking timeout which holds   #
-# the user in a 'connecting' state until the lookup is complete.      #
-# The bind value indicates which IP to bind outbound requests to.     #
-#                                                                     #
-#<ident timeout="5" bind="">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invite except module: Adds support for channel invite exceptions (+I)
-#<module name="m_inviteexception.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invisible module - Adds support for usermode +Q (quiet) which lets an
-# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
-# opers are still able to see invisible users, and if an oper with +Q
-# deopers, they will become visible. 
-# 
-# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
-# must first add the value canquiet="yes" to that oper's type tag.
-#
-#<module name="m_invisible.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Join flood module: Adds support for join flood protection (+j)
-#<module name="m_joinflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Jump Server module: Adds support for the RPL_REDIR numeric
-#<module name="m_jumpserver.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
-#<module name="m_kicknorejoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Knock module: adds the /KNOCK command and +K channel mode
-#<module name="m_knock.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# LDAP authentication module: Adds the ability to authenticate users  #
-# via LDAP. This is an extra module which must be enabled explicitly  #
-# by symlinking it from modules/extra, and requires the OpenLDAP libs #
-#                                                                     #
-#<module name="m_ldapauth.so">                                        #
-#                                                                     #
-# Configuration:                                                      #
-#                                                                     #
-# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc"                     #
-#           attribute="uid"                                           #
-#           server="ldap://brainwave.brainbox.cc"                     #
-#           allowpattern="Guest*"                                     #
-#           killreason="Access denied"                                #
-#           searchscope="subtree"                                     #
-#           binddn="cn=Manager,dc=brainbox,dc=cc"                     #
-#           bindauth="mysecretpass"                                   #
-#           verbose="yes">                                            #
-#                                                                     #
-# The baserdn indicates the base DN to search in for users. Usually   #
-# this is 'ou=People,dc=yourdomain,dc=yourtld'.                       #
-#                                                                     #
-# The attribute value indicates the attribute which is used to locate #
-# a user account by name. On POSIX systems this is usually 'uid'.     #
-#                                                                     #
-# The server parameter indicates the LDAP server to connect to. The   #
-# ldap:// style scheme before the hostname proper is MANDITORY.       #
-#                                                                     #
-# The allowpattern value allows you to specify a wildcard mask which  #
-# will always be allowed to connect regardless of if they have an     #
-# account, for example guest users.                                   #
-#                                                                     #
-# Killreason indicates the QUIT reason to give to users if they fail  #
-# to authenticate.                                                    #
-#                                                                     #
-# The searchscope value indicates the subtree to search under. On our #
-# test system this is 'subtree'. Your mileage may vary.               #
-#                                                                     #
-# Setting the verbose value causes an oper notice to be sent out for  #
-# every failed authentication to the server, with an error string.    #
-#                                                                     #
-# The binddn and bindauth indicate the DN to bind to for searching,   #
-# and the password for the distinguished name. Some LDAP servers will #
-# allow anonymous searching in which case these two values do not     #
-# need defining, otherwise they should be set similar to the examples #
-# above.                                                              #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
-# used to temporarily close/open for new connections to the server.   #
-# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
-# are specified in a <class> tag that the oper is part of. This is so #
-# you can control who has access to this possible dangerous command.  #
-# If your server is locked and you got disconnected, do a REHASH from #
-# shell to open up again.
-#<module name="m_lockserv.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Msg flood module: Adds message/notice flood protection (+f)
-#<module name="m_messageflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MsSQL module: Allows other SQL modules to access MS SQL Server 
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_mssql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_mssql.so is more complex than described here, see wiki for more   #
-# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
-#
-#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MySQL module: Allows other SQL modules to access MySQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_mysql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_mysql.so is more complex than described here, see the wiki for    #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module      #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# NAMESX module: Provides support for the NAMESX extension which allows
-# clients to see all the prefixes set on a user without getting confused.
-# This is supported by mIRC, x-chat, klient, and maybe more.
-#<module name="m_namesx.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nickban: Implements extended ban n:, which stops anyone matching
-# a mask like +b n:nick!user@host from changing their nick on channel.
-#<module name="m_nickban.so">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
-# Provides channel mode +F.
-#<module name="m_nickflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nicklock module: Let opers change a user's nick and then stop that
-# user from changing their nick again.
-#<module name="m_nicklock.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No ctcp module: Adds the channel mode +C to block CTCPs
-#<module name="m_noctcp.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Noinvite module: Gives channel mode +V
-#<module name="m_noinvite.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No kicks module: Adds the +Q channel mode
-#<module name="m_nokicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No nicks module: Adds the +N channel mode
-#<module name="m_nonicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
-#<module name="m_nonotice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-#<module name="m_operchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper flood module: Removes flood limits from users upon opering up
-#<module name="m_operflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper Join module: Auto-joins opers to a channel upon oper-up
-#<module name="m_operjoin.so">
-#
-#-#-#-#-#-#-#-#-#-#-#   OPERJOIN CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you are using the m_operjoin.so module, specify options here:    #
-#                                                                     #
-# channel     -      The channel name to join, can also be a comma    #
-#                    seperated list eg. "#channel1,#channel2".        #
-#                                                                     #
-# override    -      Lets the oper join walking thru any modes that   #
-#                    might be set, even bans. Use "yes" or "no".      #
-#                                                                     #
-#<operjoin channel="#channel" override="no">
-#
-# Alternatively you can use the autojoin="channellist" in a <type>    #
-# tag to set specific autojoins for a type of oper, for example:      #
-#
-#<type name="Helper" autojoin="#help" classes="...">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper log module: Logs all oper commands to the ircd log at default
-# loglevel.
-#<module name="m_operlog.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
-# on oper-up
-#<module name="m_opermotd.so">
-#
-#-#-#-#-#-#-#-#-#-#-#   OPERMOTD CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you are using the m_opermotd.so module, specify the motd here    #
-#                                                                     #
-#<opermotd file="oper.motd">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Override module: Adds support for oper override
-#<module name="m_override.so">
-#
-#-#-#-#-#-#-#-#-#-#-#   OVERRIDE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_override.so is too complex it describe here, see the wiki:        #
-# http://www.inspircd.org/wiki/Oper_Override_Module                   #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper levels module: Gives each oper a level and prevents
-# actions being taken against higher level opers
-# Specify the level as the 'level' parameter of the <type> tag
-#<module name="m_operlevels.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper modes module: Allows you to specify modes to add/remove on oper
-# Specify the modes as the 'modes' parameter of the <type> tag
-# and/or as the 'modes' parameter of the <oper> tag.
-#<module name="m_opermodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper password hash module: Allows hashed oper passwords
-# Relies on the module m_md5.so and/or m_sha256.so being loaded before
-# m_password_hash.so in the configuration file.
-#<module name="m_password_hash.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# To use this module, you must define a hash type for each oper's
-# password you want to hash. For example:
-#
-#     <oper name="Brain"
-#           host="ident@dialup15.isp.com"
-#           hash="sha256"
-#           password="a41d730937a53b79f788c0ab13e9e1d5"
-#           type="NetAdmin">
-# 
-# The types of hashing available vary depending on which hashing modules
-# you load, but usually if you load m_sha256.so and m_md5.so, both md5
-# and sha256 type hashing will be available (the most secure of which
-# is SHA256).
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Permanent Channels module: Channels with the permanent channels mode
-# will remain open even after everyone else has left the channel, and
-# therefore keep things like modes, ban lists and topic. Permanent
-# channels -may- need support from your Services package to function
-# properly with them. This adds channel mode +P.
-#<module name="m_permchannels.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# PostgreSQL module: Allows other SQL modules to access PgSQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_pgsql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_pgsql.so is more complex than described here, see the wiki for    #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module      #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Proxy scan module: Scans locally connecting clients for proxies.
-#<module name="m_proxyscan.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Quietban: Implements extended ban q:, which stops anyone matching
-# a mask like +b q:nick!user@host from speaking on channel.
-#<module name="m_quietban.so">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Random Quote module: provides a random quote on connect.
-# NOTE: Some of these may mimic fatal errors and confuse users and 
-# opers alike! - BEWARE!
-#<module name="m_randquote.so">
-#
-#-#-#-#-#-#-#-#-#-#-  RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you specify to use the m_randquote.so module, then    #
-# specify below the path to the randquotes.conf file.                 #
-#                                                                     #
-#<randquote file="randquotes.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Redirect module: Adds channel redirection (mode +L)
-#<module name="m_redirect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation
-# Allows only registered users and opers to create new channels.
-#<module name="m_regonlycreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Remove module: Adds the /REMOVE command which is a peaceful
-# alternative to /KICK
-#<module name="m_remove.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict banned users module:
-# Disallows banned users on a channel from messaging the channel,
-# changing nick, or changing the topic, if loaded.
-#<module name="m_restrictbanned.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
-#<module name="m_restrictchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
-#<module name="m_restrictmsg.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban users through regular expression patterns
-#<module name="m_rline.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# If you wish to re-check a user when they change nickname (can be
-# useful under some situations, but *can* also use CPU with more users
-# on a server) then set the following configuration value:
-#<rline matchonnickchange="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# JSON-RPC module: Encode and decode JSON-RPC requests for modules
-#<module name="m_rpc_json.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RPC test module: A test of the RPC API
-#<module name="m_rpctest.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Provide /LIST throttling (to prevent flooding) and /LIST safety to
-# prevent excess flood when the list is large.
-#<module name="m_safelist.so">
-#
-#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# When using Safelist, you may set the following values;
-#
-# The first value, 'throttle', sets the amount of time in seconds a user
-# must wait between LIST commands. For example, if this is set to 60
-# (the default) then the user may not /LIST more than once a minute.
-# If not defined, the default value is 60 seconds.
-#
-# The second value, 'maxlisters', indicates the maximum number of users
-# which may be retrieving a LIST at once. It is not recommended you raise
-# this value, as increasing it too high can make your network vulnerable
-# to floodbots which waste your bandwidth and CPU time with LIST requests.
-#
-#<safelist throttle="60" maxlisters="50">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAJOIN module: Adds the /SAJOIN command
-#<module name="m_sajoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAMODE module: Adds the oper /SAMODE command
-#<module name="m_samode.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SANICK module: Allows opers to change user's nicks
-#<module name="m_sanick.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAPART module: Adds the oper /SAPART command
-#<module name="m_sapart.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
-#<module name="m_saquit.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SASL authentication module: Provides support for IRC Authentication 
-# Layer (aka: atheme SASL) via AUTHENTICATE.
-#<module name="m_sasl.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Secure list module: Prevent /LIST in the first minute of connection,
-# crippling most spambots and trojan spreader bots.
-#<module name="m_securelist.so">
-#
-#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Securelist can be harmful to some irc search engines such as        #
-# netsplit.de and searchirc.com. To prevent securelist blocking these #
-# sites from listing, define exception tags as shown below:           #
-<securehost exception="*@*.searchirc.org">
-<securehost exception="*@*.netsplit.de">
-<securehost exception="*@echo940.server4you.de">
-#                                                                     #
-# Define the following variable to change how long a user must wait   #
-# before issuing a LIST. If not defined, defaults to 60 seconds.      #
-#                                                                     #
-#<securelist waittime="60">                                           #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Servprotect module: Provides support for Austhex style +k /
-# UnrealIRCD +S services mode
-#<module name="m_servprotect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# See nicks module: Allow for SNOMASK +N which shows nick changes.
-#<module name="m_seenicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Set Idle module: Adds a command for opers to change their
-# idle time (mainly a toy)
-#<module name="m_setidle.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-# this module implements the 'identified' state via user mode +r, which
-# is similar to the DALnet and dreamforge systems.
-#     
-# N O T E!!
-#  >>  This CAN NOT be used at the same time as m_services_account <<
-# N O T E!!
-#<module name="m_services.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-# this module implements the 'identified' state via account names (AC)
-# and is similar in operation to the way asuka and ircu handle services.
-#                                                                       
-# N O T E!!
-#  >>  This CAN NOT be used at the same time as m_services <<
-# N O T E!!
-#<module name="m_services_account.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Sethost module: Adds the /SETHOST command
-# See m_chghost for how to customise valid chars for hostnames
-#<module name="m_sethost.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Setident module: Adds the /SETIDENT command
-#<module name="m_setident.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SETNAME module: Adds the /SETNAME command
-#<module name="m_setname.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Show Whois module: Adds the +W usermode which allows opers
-# to see when they are whois'ed (can be annoying).
-#<module name="m_showwhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Shun module: Provides the /shun command, which stops a user executing 
-# all commands except PING and PONG.
-#<module name="m_shun.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Spy module: Provides the ability to see the complete names list of 
-# channels an oper is not a member of
-#<module name="m_spy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels (+z).
-# does not do anything useful without a working SSL module (see below)
-#<module name="m_sslmodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
-#<module name="m_ssl_gnutls.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_ssl_gnutls.so is too complex it describe here, see the wiki:      #
-# http://www.inspircd.org/wiki/GnuTLS_SSL_Module                      #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Info module: Allows users to retrieve information about other
-# user's peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-#<module name="m_sslinfo.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
-#<module name="m_ssl_openssl.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_ssl_openssl.so is too complex it describe here, see the wiki:     #
-# http://www.inspircd.org/wiki/OpenSSL_SSL_Module                     #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-#<module name="m_ssl_oper_cert.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip colour module: Adds the channel mode +S
-#<module name="m_stripcolor.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SILENCE module: Adds support for /SILENCE
-#<module name="m_silence.so">
-#
-# Configuration tags:
-#
-#<silence maxentries="32">
-#
-# Sets the maximum number of entries on a users silence list.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLite3 module: Allows other SQL modules to access SQLite3          #
-# databases through a unified API. You must link the source for this  #
-# module from the directory src/modules/extra to src/modules, plus    #
-# the file m_sqlv2.h                                                  #
-#<module name="m_sqlite3.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_sqlite.so is more complex than described here, see the wiki for   #
-# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module  #
-#
-#<database hostname="/full/path/to/database.db" id="anytext">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLutils module: Provides some utilities to SQL client modules, such
-# as mapping queries to users and channels. You must copy the source
-# for this module from the directory src/modules/extra/m_sqlutils.cpp
-# and src/modules/extra/m_sqlutils.h into /src/modules
-# Needed for, and loaded before: SQLauth and SQLoper
-#<module name="m_sqlutils.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL authentication module: Allows IRCd connections to be tied into
-# a database table (for example a forum). You must copy the source for
-# this module from the directory src/modules/extra
-# Depends on the SQLutils module being loaded first.
-#<module name="m_sqlauth.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# m_sqlauth.so is too complex it describe here, see the wiki:         #
-# http://www.inspircd.org/wiki/SQL_Authentication_Module              #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL logging module: Allows you to log network-wide data for your
-# network in a fully normalised set of SQL tables. You must copy the
-# source for this module from the directory src/modules/extra
-#<module name="m_sqllog.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-  SQLLOG CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# dbid       - Database ID to use (see m_sql)                         #
-#                                                                     #
-# See also: http://www.inspircd.org/wiki/SQL_Logging_Module           #
-#                                                                     #
-#<sqllog dbid="1">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL oper module: Allows you to store oper credentials in an SQL table
-# You must copy the source for this module from the directory src/modules/extra
-# Depends on the SQLutils module being loaded first.
-#<module name="m_sqloper.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# dbid       - Database ID to use (see m_sql)                         #
-# hash       - Hashing provider to use for password hashing           #
-#                                                                     #
-# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module      #
-#                                                                     #
-#<sqloper dbid="1" hash="md5">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be   #
-# added/removed by Services.                                          #
-#<module name="m_svshold.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
-#<module name="m_swhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Taxonomy module: Adds the /TAXONOMY command, used to view all
-#                  metadata attached to a user.
-#<module name="m_taxonomy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant. Read: pointless.
-#<module name="m_testcommand.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-#<module name="m_timedbans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test line module: Adds the /TLINE command, used to test how many
-# users a /GLINE or /ZLINE etc would match.
-#<module name="m_tline.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# UHNAMES support module: Adds support for the IRCX style UHNAMES
-# extension, which displays ident and hostname in the names list for
-# each user, saving clients from doing a WHO on the channel. Note that
-# this module is not widely supported yet. If a client does not support
-# UHNAMES it will not enable it, this will not break incompatible
-# clients.
-#<module name="m_uhnames.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Uninvite module: Adds the /UNINVITE command which lets users remove
-# pending invites from channels without waiting for the user to join.
-#<module name="m_uninvite.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Userip module: Adds the /USERIP command
-#<module name="m_userip.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Vhost module: Adds the VHOST command which allows for adding virtual
-# hosts which are accessible using a username and password in the config.
-#<module name="m_vhost.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# user       - Username for the vhost.                                #
-#                                                                     #
-# pass       - Password for the vhost.                                #
-#                                                                     #
-# host       - Vhost to set.                                          #
-#
-#<vhost user="some_username" pass="some_password" host="some.host">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Watch module: Adds the WATCH command, which is used by clients to 
-# maintain notify lists.
-#<module name="m_watch.so">
-#
-# Configuration tags:
-#
-#<watch maxentries="32">
-#
-# Sets the maximum number of entries on a user's watch list.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
-# in a file "xline.db" which can be re-loaded on restart. This is useful
-# for two reasons: it keeps bans so users may not evade them, and on
-# bigger networks, server connections will take less time as there will
-# be a lot less bans to apply - as most of them will already be there.
-#<module name="m_xline_db.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# XMLSocket module: Adds support for connections using the shockwave
-# flash XMLSocket. Note that this does not work if the client you are
-# using has retarded ideas of the IRC protocol. Your client must still
-# send RFC-correct lines to the server, this module only changes the
-# line ending from newlines to null terminators.
-#
-#<module name="m_xmlsocket.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# ZipLinks module: Adds support for zlib deflate on server to server
-# connections. Both ends of the connection must load this module.
-#
-#<module name="m_ziplink.so">
-#
-# To use this module, you must enable it as a transport type in your
-# <link> tags or <bind> tags using the transport name 'zip'.
-# See the documentation of <link> and <bind>, respectively.
-#
-
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-  BAN OPTIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # The ban tags define nick masks, host masks and ip ranges which are  #
@@ -2664,6 +1225,20 @@
 
 <die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
 
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+#    ____                _   _____ _     _       ____  _ _   _        #
+#   |  _ \ ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
+#   | |_) / _ \/ _` |/ _` |   | | | '_ \| / __| |  _ \| | __| |       #
+#   |  _ <  __/ (_| | (_| |   | | | | | | \__ \ | |_) | | |_|_|       #
+#   |_| \_\___|\__,_|\__,_|   |_| |_| |_|_|___/ |____/|_|\__(_)       #
+#                                                                     #
+# Well done, you've reached the end of this.                          #
+# We now suggest you read and edit modules.conf, as modules are what  #
+# provide almost all the features of InspIRCd. :)                     #
+#                                                                     #
+# The default does nothing -- we include it for simplicity for you.   #
+<include file="modules.conf">
+
 
 #########################################################################
 #                                                                       #
diff --git a/conf/modules.conf b/conf/modules.conf
new file mode 100644
index 000000000..db255cca3
--- /dev/null
+++ b/conf/modules.conf
@@ -0,0 +1,1437 @@
+#-#-#-#-#-#-#-#-#-#-#-#-#-  MODULE OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+#  These tags define which modules will be loaded on startup by your  #
+#  server. Add modules without any paths. When you make your ircd     #
+#  using the 'make' command, all compiled modules will be moved into  #
+#  the folder you specified when you ran ./configure. The module tag  #
+#  automatically looks for modules in this location.                  #
+#  If you attempt to load a module outside of this location, either   #
+#  in the config, or via /LOADMODULE, you will receive an error.      #
+#                                                                     #
+#  By default, ALL modules are commented out. You must uncomment them #
+#  or add lines to your config to load modules. Please refer to       #
+#  http://www.inspircd.org/wiki/Modules_List for a list of modules and#
+#  each modules link for any additional conf tags they require.       #
+#                                                                     #
+#  You may use wildcards in a <module> tag to load all modules which  #
+#  match a glob pattern (e.g. m_sa????.so would load m_sajoin,        #
+#  m_sapart, m_saquit and m_sanick)                                   #
+#                                                                     #
+#    ____                _   _____ _     _       ____  _ _   _        #
+#   |  _ \ ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
+#   | |_) / _ \/ _` |/ _` |   | | | '_ \| / __| |  _ \| | __| |       #
+#   |  _ <  __/ (_| | (_| |   | | | | | | \__ \ | |_) | | |_|_|       #
+#   |_| \_\___|\__,_|\__,_|   |_| |_| |_|_|___/ |____/|_|\__(_)       #
+#                                                                     #
+# To link servers to InspIRCd, you MUST load the m_spanningtree       #
+# module, as shown below. If you DO NOT do this, server links will    #
+# NOT work at all. ie. The ports will NOT bind, and /connect will not #
+# work properly. This is by design, to allow for the implementation   #
+# of other linking protocols in modules in the future.                #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spanning Tree module - allows linking of servers using the spanning
+# tree protocol (see the READ THIS BIT section above).
+#
+#<module name="m_spanningtree.so">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MD5 Module - Allows other modules to generate MD5 hashes, usually for
+# cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_cloaking.so and m_password_hash.so may rely on
+# this module being loaded to function.
+#
+#<module name="m_md5.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA256 Module - Allows other modules to generate SHA256 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_password_hash.so may rely on this module being
+# loaded to function. Certain modules such as m_spanningtree.so will
+# function without this module but when it is loaded their features will
+# be enhanced (for example the addition of HMAC authentication).
+#
+#<module name="m_sha256.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
+# usually for cryptographic uses and security.
+# 
+# IMPORTANT:
+# Other modules may rely on this module being loaded to function.
+#<module name="m_ripemd160.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Abbreviation module: Provides the ability to abbreviate commands a-la 
+# BBC BASIC keywords.
+#<module name="m_abbreviation.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alias module: Allows you to define server-side command aliases
+#<module name="m_alias.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  ALIAS DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# If you have the m_alias.so module loaded, you may also define       #
+# aliases as shown below. They are commonly used to provide shortcut  #
+# commands to services, however they are not limited to just this use.#
+# An alias tag requires the following values to be defined in it:     #
+#                                                                     #
+# text        -      The text to detect as the actual command line,   #
+#                    Cant contain spaces, but case insensitive.       #
+#                    You may have multiple aliases with the same      #
+#                    command name (text="" value), however the first  #
+#                    found will be executed if its format value is    #
+#                    matched, or it has no format value. Aliases are  #
+#                    read from the top of the file to the bottom.     #
+#                                                                     #
+# format      -      If this is defined, the parameters of the alias  #
+#                    must match this glob pattern. For example if you #
+#                    want the first parameter to start with a # for   #
+#                    the alias to be executed, set format="#*" in the #
+#                    alias definition. Note that the :'s which are    #
+#                    part of IRC formatted lines will be preserved    #
+#                    for matching of this text. This value is         #
+#                    optional.                                        #
+#                                                                     #
+# replace     -      The text to replace 'text' with. Usually this    #
+#                    will be "PRIVMSG ServiceName :$2-" or similar.   #
+#                    You may use the variables $1 through $9 in the   #
+#                    replace string, which refer to the first through #
+#                    ninth word in the original string typed by the   #
+#                    user. You may also use $1- through $9- which     #
+#                    refer to the first word onwards, through to the  #
+#                    ninth word onwards, e.g. if the user types the   #
+#                    command "foo bar baz qux quz" then $3- will hold #
+#                    "baz qux quz" and $2 will contain "bar". You may #
+#                    also use the special variables: $nick, $ident,   #
+#                    $host and $vhost, and you may separate multiple  #
+#                    commands with \n. If you wish to use the ACTUAL  #
+#                    characters \ and n together in a line, you must  #
+#                    use the sequence "\\n".                          #
+#                                                                     #
+# requires    -      If you provide a value for 'requires' this means #
+#                    the given nickname MUST be online for the alias  #
+#                    to successfully trigger. If they are not, then   #
+#                    the user receives a 'no such nick' 401 numeric.  #
+#                                                                     #
+# uline       -      Defining this value with 'yes', 'true' or '1'    #
+#                    will ensure that the user given in 'requires'    #
+#                    must also be on a u-lined server, as well as     #
+#                    actually being on the network. If the user is    #
+#                    online, but not on a u-lined server, then an     #
+#                    oper-alert is sent out as this is possibly signs #
+#                    of a user trying to impersonate a service.       #
+#                                                                     #
+# operonly    -      Defining this value, with a value of 'yes', '1'  #
+#                    or true will make the alias oper only. If a non- #
+#                    oper attempts to use the alias, it will appear   #
+#                    to not exist.                                    #
+#                                                                     #
+#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+#  requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+#  requires="NickServ" uline="yes">
+#
+# This alias fixes a glitch in xchat 2.6.x and above and the way it
+# assumes IDENTIFY must be prefixed by a colon (:) character. It should
+# be placed ABOVE the default NICKSERV alias (the first example) listed
+# above.
+#
+#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
+#  requires="NickServ" uline="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alltime module: Shows time on all connected servers at once
+#<module name="m_alltime.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+#<module name="m_antibear.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibottler module: Labels bottler leech bots
+#<module name="m_antibottler.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Auditorium module: Adds channel mode +u which makes everyone else
+# except you in the channel invisible, used for large meetings etc.
+#<module name="m_auditorium.so">
+#
+# Auditorium settings:
+#
+#<auditorium showops="no" operoverride="no">
+#
+# showops:
+#   Setting this value to yes makes m_auditorium behave like unrealircd
+#   +u channel mode, e.g. ops see users joining, parting, etc, and users
+#   joining the channel see the ops. Without this flag, the mode acts
+#   like ircnet's +a (anonymous channels), showing only the user in the
+#   names list, and not even showing the ops in the list, or showing the
+#   ops that the user has joined.
+# operoverride:
+#   Setting this value to yes makes m_auditorium affect the userlist for
+#   regular users only. Opers will view all users in the channel normally.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban except module: Adds support for channel ban exceptions (+e)
+#<module name="m_banexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban redirection module: Allows bans which redirect to a specified
+# channel. e.g. +b nick!ident@host#channelbanneduserissentto
+#<module name="m_banredirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+#<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  BLOCKAMSG CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# If you have the m_blockamsg.so module loaded, you can configure it  #
+# with the <blockamsg> tag:                                           #
+#                                                                     #
+# delay          -   How many seconds between two messages to force   #
+#                    them to be recognised as unrelated.              #
+# action         -   Any of 'notice', 'noticeopers', 'silent', 'kill' #
+#                    or 'killopers'. Define how to take action when   #
+#                    a user uses /amsg or /ame.                       #
+#
+#<blockamsg delay="3" action="killopers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block CAPS module: Blocking all-CAPS messages with cmode +B
+#<module name="m_blockcaps.so">
+#                                                                     #
+#-#-#-#-#-#-#-#-#-#-#-  BLOCKCAPS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# percent        - How many percent of text must be caps before text  #
+#                  will be blocked.                                   #
+#                                                                     #
+# minlen         - The minimum length a line must be for the block    #
+#                  percent to have any effect.                        #
+#                                                                     #
+# capsmap        - A list of chars to be considered CAPS, this was    #
+#                  you can add CAPS for your language. Also you can   #
+#                  add things like ! and space to further lock down   #
+#                  on caps usage.                                     #
+#<blockcaps percent="50"
+#           minlen="5"
+#           capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block colour module: Blocking colour-coded messages with cmode +c
+#<module name="m_blockcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Botmode module: Adds the user mode +B
+#<module name="m_botmode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CallerID module: Adds usermode +g which activates hybrid-style 
+# callerid (== block all private messages unless you /accept first)
+#<module name="m_callerid.so">
+# 
+#-#-#-#-#-#-#-#-#-#-#- CALLERID  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# maxaccepts     - Maximum number of entires a user can add to his    #
+#                  /accept list. Default is 16 entries.               #
+# operoverride   - Can opers (note: ALL opers) ignore callerid mode?  #
+#                  Default is no.                                     #
+# tracknick      - Preserve /accept entries when a user changes nick? #
+#                  If no (the default), the user is removed from      #
+#                  everyone's accept list if he changes nickname.     #
+# cooldown       - Amount of time (in seconds) that must pass since   #
+#                  the last notification sent to a user before he can #
+#                  be sent another. Default is 60 (1 minute).         #
+#<callerid maxaccepts="16"
+#          operoverride="no"
+#          tracknick="no"
+#          cooldown="60"
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CAP module: Provides the CAP negotiation mechanism seen in
+# ratbox-derived ircds
+#<module name="m_cap.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CBAN module: Lets you disallow channels from being used at runtime.
+#<module name="m_cban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Censor module: Adds the channel mode +G
+#<module name="m_censor.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  CENSOR  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you specify to use the m_censor module, then you must #
+# specify some censor tags. See also:                                 #
+# http://www.inspircd.org/wiki/Censor_Module                          #
+#
+#<include file="censor.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
+# (http://cgiirc.sourceforge.net).
+#<module name="m_cgiirc.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you specify to use m_cgiirc, then you must specify one
+# or more cgihost tags which indicate authorised CGI:IRC servers which
+# will be connecting to your network, and an optional cgiirc tag.
+# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
+#
+# Set to yes if you want to notice opers when CGI clients connect
+# <cgiirc opernotice="no">
+#
+# The type field indicates where the module should get the real
+# client's IP address from, for further information, please see the
+# CGI:IRC documentation.
+#
+# Old style:
+# <cgihost type="pass" mask="www.mysite.com">       # Get IP from PASS
+# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
+# <cgihost type="passfirst" mask="www.mysite.com">  # See the docs
+# New style:
+# <cgihost type="webirc" pass="foobar"
+#   mask="somebox.mysite.com">                      # Get IP from WEBIRC
+#
+# IMPORTANT NOTE:
+# ---------------
+#
+# When you connect CGI:IRC clients, there are two connect classes which
+# apply to these clients. When the client initially connects, the connect
+# class which matches the cgi:irc site's host is checked. Therefore you
+# must raise the maximum local/global clients for this ip as high as you
+# want to allow cgi clients. After the client has connected and is
+# determined to be a cgi:irc client, the class which matches the client's
+# real IP is then checked. You may set this class to a lower value, so that
+# the real IP of the client can still be restricted to, for example, 3
+# sessions maximum.
+#
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel create module: Adds snomask +j, which will notify opers of
+# any new channels that are created
+#<module name="m_chancreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel filter module: Allows channel-op defined message
+# filtering using simple string matches (channel mode +g)
+#<module name="m_chanfilter.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Chanprotect module: gives +q and +a channel modes
+#<module name="m_chanprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Check module: gives /check
+# Check is useful for looking up information on channels,
+# users, IP addresses and hosts.
+#<module name="m_check.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGHOST module: Adds the /CHGHOST command
+#<module name="m_chghost.so">
+#
+#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST  CONFIGURATION #-#-#-#-#-#-#-#-#
+# Optional - If you want to use special chars for hostnames you can  #
+# specify your own custom list of chars with the <hostname> tag:     #
+#                                                                    #
+# charmap        - A list of chars accepted as valid by the /CHGHOST #
+#                  and /SETHOST commands. Also note that the list is # 
+#                  case-sensitive.                                   #
+#<hostname charmap="abcdefghijklmnopqrstuvwxyz.-_/0123456789">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGIDENT module: Adds the /CHGIDENT command
+#<module name="m_chgident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGNAME module: Adds the /CHGNAME command
+#<module name="m_chgname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Cloaking module: Adds usermode +x and cloaking support.
+# Relies on the module m_md5.so being loaded before m_cloaking.so in
+# the configuration file.
+#<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you specify the m_cloaking.so module as above, you    #
+# must define cloak keys, and optionally a cloak prefix as shown      #
+# below. When using cloaking, the cloak keys are MANDITORY and must   #
+# be included. However, if prefix is not included, it will default    #
+# to your networks name from the <server> tag. You can also include   #
+# the following optional values:                                      #
+#                                                                     #
+#   ipalways         - Always cloak the IP address, not the hostname, #
+#                      which doesn't reveal the user's ISP, but       #
+#                      results in hosts that are harder to read and   #
+#                      ban.                                           #
+#                                                                     #
+#   lowercase        - Display the cloaked hostnames in lowercase     #
+#                      characters instead of uppercase                #
+#                                                                     #
+# <cloak key1="0x2AF39F40"                                            #
+#        key2="0x78E10B32"                                            #
+#        key3="0x4F2D2E82"                                            #
+#        key4="0x043A4C81"                                            #
+#        prefix="mynet"                                               #
+#        ipalways="false"                                             #
+#        lowercase="false">                                           #
+#                                                                     #
+# Please note that the key values will accept any number, and should  #
+# be large numbers. Using small numbers such as "7" or "1924" will    #
+# seriously weaken the security of your cloak. It is recommended you  #
+# use hexdecimal numbers prefixed by "0x", as shown in this example,  #
+# with each key eight hex digits long.                                #
+
+#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Close module: Allows an oper to close all unregistered connections.
+#<module name="m_close.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Clones module: Adds an oper command /CLONES for detecting cloned
+# users. Warning: This module may be resource intensive when its
+# command is issued, use with care.
+#<module name="m_clones.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Common channels module: Adds user mode +c, which, when set, requires
+# that users must share a common channel with you to PRIVMSG or NOTICE
+# you.
+#<module name="m_commonchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Join: Allows you to force users to join one or more channels
+# automatically upon connecting to the server.
+#<module name="m_conn_join.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#
+# If you have m_conn_join.so loaded, you can configure it using the
+# follow values:
+#
+#<autojoin channel="#one,#two,#three">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Usermodes: Set modes on users when they connect
+# When this module is loaded <connect:allow> tags may have an optional
+# modes="" value, which contains modes to add or remove from users
+# when they connect to the server.
+#<module name="m_conn_umodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Wait-for-Pong: Don't let a user connect until they PONG
+#<module name="m_conn_waitpong.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-   WAITPONG CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# If you have the m_conn_waitpong.so module loaded, configure it with #
+# the <waitpong> tag:                                                 #
+#                                                                     #
+# sendsnotice    -   Whether to send a snotice on connect, like other #
+#                    older ircds                                      #
+#                                                                     #
+# killonbadreply -   Whether to kill the user if they send the wrong  #
+#                    PONG reply.                                      #
+#                                                                     #
+#<waitpong sendsnotice="yes" killonbadreply="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel cycle module. Server side /hop, with +ilk etc bypass.
+#<module name="m_cycle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connectban: Provides per-IP connection throttling. Any IP that disconnects
+# too many times (configurable) in an hour is zlined for a (configurable)
+# duration, and their count resets to 0.
+#
+# NOTE: This module may change name/behaviour later in 1.2. Please make sure
+# you read release announcements!
+#
+#<connectban threshold="10" duration="10m">
+# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
+#
+#<module name="m_connectban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection throttle module. Configuration:
+#<module name="m_connflood.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#  seconds, maxconns -  Amount of connections per <seconds>.
+#
+#  timeout           -  Time to wait after the throttle was activated
+#                       before deactivating it. Be aware that the time
+#                       is seconds + timeout.
+#
+#  quitmsg           -  The message that users get if they attempt to
+#                       connect while the throttle is active.
+#
+#  bootwait          -  Amount of time to wait before enforcing the
+#                       throttling when the server just booted.
+#
+#<connflood seconds="30" maxconns="3" timeout="30"
+#   quitmsg="Throttled" bootwait="10">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Custom title module: Adds the /TITLE command which allows for trusted
+#                      users to gain a custom whois line and a optional
+#                      vhost can be specified.
+#<module name="m_customtitle.so">
+#
+#-#-#-#-#-#-#-#-#-#-  CUSTOM TITLE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#
+#  name              - The username used to identify 
+#  password          - The password used to identify
+#  host              - Allowed hostmask [optional]
+#  title             - Title shown in whois
+#  vhost             - Displayed host [optional]
+#
+#<title name="foo" password="bar" title="Official Chat Helper">
+#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DCCALLOW module: Adds the /DCCALLOW command
+#<module name="m_dccallow.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  DCCALLOW CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
+#  blockchat         - Whether to block DCC CHAT as well as DCC SEND
+#  length            - Default duration of entries in DCCALLOW list
+#  action            - Default action to take if no action is specified
+#                      can be 'block' or 'allow'
+#
+# File configuration:
+#  pattern           - The glob pattern to match against
+#  action            - Action to take if a user attempts to send a file
+#                      that matches this pattern, can be 'block' or 'allow'
+#
+#<dccallow blockchat="yes" length="5m" action="block">
+#<banfile pattern="*.exe" action="block">
+#<banfile pattern="*.txt" action="allow">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deaf module: adds support for ircu style usermode +d - deaf to
+# channel messages and channel notices.
+#<module name="m_deaf.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay join module: Adds the channel mode +D which delays all JOIN
+# messages from users until they speak. If they quit or part before
+# speaking, their quit or part message will not be shown to the channel
+# which helps cut down noise on large channels in a more friendly way
+# than the auditorium mode. Only channel ops may set the +D mode.
+#<module name="m_delayjoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deny Channels: Deny Channels from being used by users
+#<module name="m_denychans.so"> 
+#
+#-#-#-#-#-#-#-#-#-#-#-   DENYCHAN DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# If you have the m_denychans.so module loaded, you need to specify   #
+# the channels to deny:                                               #
+#                                                                     #
+# name        -      The channel name to deny. (glob masks are ok)    #
+#                                                                     #
+# allowopers  -      If operators are allowed to override the deny.   #
+#                                                                     #
+# reason      -      Reason given for the deny.                       #
+#                                                                     #
+# redirect    -      Redirect the user to a different channel         #
+#                                                                     #
+#<badchan name="#gods*" allowopers="yes" reason="Tortoises!">         #
+#<badchan name="#heaven" redirect="#hell" reason="Nice try!">         #
+#                                                                     #
+# Redirects will not work if the target channel is set +L.            #
+#                                                                     #
+# Additionally, you may specify channels which are allowed, even if   #
+# a badchan tag specifies it would be denied:                         #
+#<goodchan name="#godsleeps">                                         #
+# Glob masks are accepted here also.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Devoice Module: Let users devoice themselves.
+#<module name="m_devoice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DNS Blacklist Module: Provides support for looking up IPs on one or #
+# more blacklists.                                                    #
+#<module name="m_dnsbl.so">                                           #
+#                                                                     #
+# For configuration options please see the wiki page for m_dnsbl at   #
+# http://inspircd.org/wiki/DNS_Blacklist_Module                       #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Filter module: Provides glob-based message filtering
+#<module name="m_filter.so">
+# OR
+# PCRE filter module: Filters messages using regular expressions
+#<module name="m_filter_pcre.so">
+#
+# You may only use one or the other with these modules, network-wide.
+#
+#-#-#-#-#-#-#-#-#-#-#-  FILTER  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you specify to use the m_filter or m_filter_pcre      #
+# modules, then specfiy below the path to the filter.conf file,       #
+# or define some <filter> tags.                                       #
+#                                                                     #
+#<include file="filter.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Foobar module: does nothing - historical relic
+#<module name="m_foobar.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GeoIP module: Allows the server admin to ban users by country code.
+#<module name="m_geoip.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#  GEOIP CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# <geoip banunknown="false">                                          #
+#                                                                     #
+# Set this value to true or yes to block unknown IP ranges which are  #
+# not in the database (usually LAN addresses, localhost, etc)         #
+#                                                                     #
+# <geoban country="TR" reason="This country not permitted">           #
+#                                                                     #
+# Use one or more of these tags to ban countries by country code.     #
+# The country code must be in capitals and should be an ISO country   #
+# code such as TR, GB, or US.                                         #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Globops module: gives /GLOBOPS and usermode +g
+#<module name="m_globops.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Global load module: Allows loading and unloading of modules network-
+# wide (USE WITH EXTREME CAUTION!)
+#<module name="m_globalload.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HELPOP module: Provides the /HELPOP command
+#<module name="m_helpop.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-  HELPOP  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you specify to use the m_helpop.so module, then       #
+# specify below the path to the helpop.conf file, or if you like to   #
+# make a mess, define your helpop tags in this conf.                  #
+#                                                                     #
+#<include file="helpop.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDECHANS module: Allows opers to hide their channels list from non-
+# opers by setting user mode +I on themselves.
+# <module name="m_hidechans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDEOPER module: Allows opers to hide their oper status from non-
+# opers by setting user mode +H on themselves.
+# <module name="m_hideoper.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hostchange module: Allows a different style of cloaking
+#<module name="m_hostchange.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  HOSTCHANGE  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you choose to use the m_hostchange.so module.         #
+# Config Help -  See http://www.inspircd.org/wiki/Host_Changer_Module #
+#                                                                     #
+#<host suffix="polarbears.org" separator="." prefix="">
+#<hostchange mask="*@fbi.gov" action="addnick">
+#<hostchange mask="*r00t@*" action="suffix">
+#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
+#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# httpd module: Provides http server support for InspIRCd
+#<module name="m_httpd.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-  HTTPD   CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you choose to use the m_httpd.so module,  then you must
+# specify the port number and other details of your http server:
+#
+#<http ip="192.168.1.10" host="brainwave" port="32006"
+#      index="/home/brain/inspircd/http/index.html">
+#
+# You may have as many of these tags as you wish, each with a different
+# IP, port, host or index file. Each one will act as an independent
+# HTTP server.
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http ACL module: Provides access control lists for m_httpd dependent
+# modules. Use this module to restrict pages by IP address and by
+# password.
+#
+#<module name="m_httpd_acl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Restrict access to the m_httpd_stats module to all but the local
+# network and when the correct password is specified:
+#
+# <httpdacl path="/stats*" types="password,whitelist"
+#    username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
+# 
+# Deny all connections to all but the main index page:
+#
+# <httpdacl path="/*" types="blacklist" blacklist="*">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http config module: Allows the server's configuration to be viewed
+# over HTTP. Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_config.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http stats module: Provides basic stats pages over HTTP
+# Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_stats.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+#
+#<httpstats stylesheet="http://remote.style/sheet.css">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ident: Provides RFC 1413 ident lookup support
+#<module name="m_ident.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-   IDENT CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you are using the m_ident.so module, then you can     #
+# specify the timeout for ident lookups here. If not defined, it will #
+# default to one second. This is a non-blocking timeout which holds   #
+# the user in a 'connecting' state until the lookup is complete.      #
+# The bind value indicates which IP to bind outbound requests to.     #
+#                                                                     #
+#<ident timeout="5" bind="">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invite except module: Adds support for channel invite exceptions (+I)
+#<module name="m_inviteexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invisible module - Adds support for usermode +Q (quiet) which lets an
+# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
+# opers are still able to see invisible users, and if an oper with +Q
+# deopers, they will become visible. 
+# 
+# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
+# must first add the value canquiet="yes" to that oper's type tag.
+#
+#<module name="m_invisible.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Join flood module: Adds support for join flood protection (+j)
+#<module name="m_joinflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Jump Server module: Adds support for the RPL_REDIR numeric
+#<module name="m_jumpserver.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
+#<module name="m_kicknorejoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Knock module: adds the /KNOCK command and +K channel mode
+#<module name="m_knock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP authentication module: Adds the ability to authenticate users  #
+# via LDAP. This is an extra module which must be enabled explicitly  #
+# by symlinking it from modules/extra, and requires the OpenLDAP libs #
+#                                                                     #
+#<module name="m_ldapauth.so">                                        #
+#                                                                     #
+# Configuration:                                                      #
+#                                                                     #
+# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc"                     #
+#           attribute="uid"                                           #
+#           server="ldap://brainwave.brainbox.cc"                     #
+#           allowpattern="Guest*"                                     #
+#           killreason="Access denied"                                #
+#           searchscope="subtree"                                     #
+#           binddn="cn=Manager,dc=brainbox,dc=cc"                     #
+#           bindauth="mysecretpass"                                   #
+#           verbose="yes">                                            #
+#                                                                     #
+# The baserdn indicates the base DN to search in for users. Usually   #
+# this is 'ou=People,dc=yourdomain,dc=yourtld'.                       #
+#                                                                     #
+# The attribute value indicates the attribute which is used to locate #
+# a user account by name. On POSIX systems this is usually 'uid'.     #
+#                                                                     #
+# The server parameter indicates the LDAP server to connect to. The   #
+# ldap:// style scheme before the hostname proper is MANDITORY.       #
+#                                                                     #
+# The allowpattern value allows you to specify a wildcard mask which  #
+# will always be allowed to connect regardless of if they have an     #
+# account, for example guest users.                                   #
+#                                                                     #
+# Killreason indicates the QUIT reason to give to users if they fail  #
+# to authenticate.                                                    #
+#                                                                     #
+# The searchscope value indicates the subtree to search under. On our #
+# test system this is 'subtree'. Your mileage may vary.               #
+#                                                                     #
+# Setting the verbose value causes an oper notice to be sent out for  #
+# every failed authentication to the server, with an error string.    #
+#                                                                     #
+# The binddn and bindauth indicate the DN to bind to for searching,   #
+# and the password for the distinguished name. Some LDAP servers will #
+# allow anonymous searching in which case these two values do not     #
+# need defining, otherwise they should be set similar to the examples #
+# above.                                                              #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
+# used to temporarily close/open for new connections to the server.   #
+# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
+# are specified in a <class> tag that the oper is part of. This is so #
+# you can control who has access to this possible dangerous command.  #
+# If your server is locked and you got disconnected, do a REHASH from #
+# shell to open up again.
+#<module name="m_lockserv.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Msg flood module: Adds message/notice flood protection (+f)
+#<module name="m_messageflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MsSQL module: Allows other SQL modules to access MS SQL Server 
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mssql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_mssql.so is more complex than described here, see wiki for more   #
+# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
+#
+#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MySQL module: Allows other SQL modules to access MySQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mysql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_mysql.so is more complex than described here, see the wiki for    #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module      #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# NAMESX module: Provides support for the NAMESX extension which allows
+# clients to see all the prefixes set on a user without getting confused.
+# This is supported by mIRC, x-chat, klient, and maybe more.
+#<module name="m_namesx.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickban: Implements extended ban n:, which stops anyone matching
+# a mask like +b n:nick!user@host from changing their nick on channel.
+#<module name="m_nickban.so">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
+# Provides channel mode +F.
+#<module name="m_nickflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nicklock module: Let opers change a user's nick and then stop that
+# user from changing their nick again.
+#<module name="m_nicklock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No ctcp module: Adds the channel mode +C to block CTCPs
+#<module name="m_noctcp.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Noinvite module: Gives channel mode +V
+#<module name="m_noinvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No kicks module: Adds the +Q channel mode
+#<module name="m_nokicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No nicks module: Adds the +N channel mode
+#<module name="m_nonicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T
+#<module name="m_nonotice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper channels mode: Adds the +O channel mode
+#<module name="m_operchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper flood module: Removes flood limits from users upon opering up
+#<module name="m_operflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper Join module: Auto-joins opers to a channel upon oper-up
+#<module name="m_operjoin.so">
+#
+#-#-#-#-#-#-#-#-#-#-#   OPERJOIN CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# If you are using the m_operjoin.so module, specify options here:    #
+#                                                                     #
+# channel     -      The channel name to join, can also be a comma    #
+#                    seperated list eg. "#channel1,#channel2".        #
+#                                                                     #
+# override    -      Lets the oper join walking thru any modes that   #
+#                    might be set, even bans. Use "yes" or "no".      #
+#                                                                     #
+#<operjoin channel="#channel" override="no">
+#
+# Alternatively you can use the autojoin="channellist" in a <type>    #
+# tag to set specific autojoins for a type of oper, for example:      #
+#
+#<type name="Helper" autojoin="#help" classes="...">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper log module: Logs all oper commands to the ircd log at default
+# loglevel.
+#<module name="m_operlog.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper MOTD module: Provides support for seperate message of the day
+# on oper-up
+#<module name="m_opermotd.so">
+#
+#-#-#-#-#-#-#-#-#-#-#   OPERMOTD CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# If you are using the m_opermotd.so module, specify the motd here    #
+#                                                                     #
+#<opermotd file="oper.motd">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Override module: Adds support for oper override
+#<module name="m_override.so">
+#
+#-#-#-#-#-#-#-#-#-#-#   OVERRIDE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_override.so is too complex it describe here, see the wiki:        #
+# http://www.inspircd.org/wiki/Oper_Override_Module                   #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper levels module: Gives each oper a level and prevents
+# actions being taken against higher level opers
+# Specify the level as the 'level' parameter of the <type> tag
+#<module name="m_operlevels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper modes module: Allows you to specify modes to add/remove on oper
+# Specify the modes as the 'modes' parameter of the <type> tag
+# and/or as the 'modes' parameter of the <oper> tag.
+#<module name="m_opermodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper password hash module: Allows hashed oper passwords
+# Relies on the module m_md5.so and/or m_sha256.so being loaded before
+# m_password_hash.so in the configuration file.
+#<module name="m_password_hash.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# To use this module, you must define a hash type for each oper's
+# password you want to hash. For example:
+#
+#     <oper name="Brain"
+#           host="ident@dialup15.isp.com"
+#           hash="sha256"
+#           password="a41d730937a53b79f788c0ab13e9e1d5"
+#           type="NetAdmin">
+# 
+# The types of hashing available vary depending on which hashing modules
+# you load, but usually if you load m_sha256.so and m_md5.so, both md5
+# and sha256 type hashing will be available (the most secure of which
+# is SHA256).
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Permanent Channels module: Channels with the permanent channels mode
+# will remain open even after everyone else has left the channel, and
+# therefore keep things like modes, ban lists and topic. Permanent
+# channels -may- need support from your Services package to function
+# properly with them. This adds channel mode +P.
+#<module name="m_permchannels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# PostgreSQL module: Allows other SQL modules to access PgSQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_pgsql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_pgsql.so is more complex than described here, see the wiki for    #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module      #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Proxy scan module: Scans locally connecting clients for proxies.
+#<module name="m_proxyscan.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Quietban: Implements extended ban q:, which stops anyone matching
+# a mask like +b q:nick!user@host from speaking on channel.
+#<module name="m_quietban.so">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Random Quote module: provides a random quote on connect.
+# NOTE: Some of these may mimic fatal errors and confuse users and 
+# opers alike! - BEWARE!
+#<module name="m_randquote.so">
+#
+#-#-#-#-#-#-#-#-#-#-  RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Optional - If you specify to use the m_randquote.so module, then    #
+# specify below the path to the randquotes.conf file.                 #
+#                                                                     #
+#<randquote file="randquotes.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Redirect module: Adds channel redirection (mode +L)
+#<module name="m_redirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Registered users only channel creation
+# Allows only registered users and opers to create new channels.
+#<module name="m_regonlycreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK
+#<module name="m_remove.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict banned users module:
+# Disallows banned users on a channel from messaging the channel,
+# changing nick, or changing the topic, if loaded.
+#<module name="m_restrictbanned.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restricted channels module: Allows only opers to create channels
+#<module name="m_restrictchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict message module: Allows users to only message opers
+#<module name="m_restrictmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban users through regular expression patterns
+#<module name="m_rline.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# If you wish to re-check a user when they change nickname (can be
+# useful under some situations, but *can* also use CPU with more users
+# on a server) then set the following configuration value:
+#<rline matchonnickchange="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# JSON-RPC module: Encode and decode JSON-RPC requests for modules
+#<module name="m_rpc_json.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RPC test module: A test of the RPC API
+#<module name="m_rpctest.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Provide /LIST throttling (to prevent flooding) and /LIST safety to
+# prevent excess flood when the list is large.
+#<module name="m_safelist.so">
+#
+#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# When using Safelist, you may set the following values;
+#
+# The first value, 'throttle', sets the amount of time in seconds a user
+# must wait between LIST commands. For example, if this is set to 60
+# (the default) then the user may not /LIST more than once a minute.
+# If not defined, the default value is 60 seconds.
+#
+# The second value, 'maxlisters', indicates the maximum number of users
+# which may be retrieving a LIST at once. It is not recommended you raise
+# this value, as increasing it too high can make your network vulnerable
+# to floodbots which waste your bandwidth and CPU time with LIST requests.
+#
+#<safelist throttle="60" maxlisters="50">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAJOIN module: Adds the /SAJOIN command
+#<module name="m_sajoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAMODE module: Adds the oper /SAMODE command
+#<module name="m_samode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SANICK module: Allows opers to change user's nicks
+#<module name="m_sanick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAPART module: Adds the oper /SAPART command
+#<module name="m_sapart.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
+#<module name="m_saquit.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SASL authentication module: Provides support for IRC Authentication 
+# Layer (aka: atheme SASL) via AUTHENTICATE.
+#<module name="m_sasl.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+#<module name="m_securelist.so">
+#
+#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# Securelist can be harmful to some irc search engines such as        #
+# netsplit.de and searchirc.com. To prevent securelist blocking these #
+# sites from listing, define exception tags as shown below:           #
+<securehost exception="*@*.searchirc.org">
+<securehost exception="*@*.netsplit.de">
+<securehost exception="*@echo940.server4you.de">
+#                                                                     #
+# Define the following variable to change how long a user must wait   #
+# before issuing a LIST. If not defined, defaults to 60 seconds.      #
+#                                                                     #
+#<securelist waittime="60">                                           #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Servprotect module: Provides support for Austhex style +k /
+# UnrealIRCD +S services mode
+#<module name="m_servprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# See nicks module: Allow for SNOMASK +N which shows nick changes.
+#<module name="m_seenicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Set Idle module: Adds a command for opers to change their
+# idle time (mainly a toy)
+#<module name="m_setidle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via user mode +r, which
+# is similar to the DALnet and dreamforge systems.
+#     
+# N O T E!!
+#  >>  This CAN NOT be used at the same time as m_services_account <<
+# N O T E!!
+#<module name="m_services.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via account names (AC)
+# and is similar in operation to the way asuka and ircu handle services.
+#                                                                       
+# N O T E!!
+#  >>  This CAN NOT be used at the same time as m_services <<
+# N O T E!!
+#<module name="m_services_account.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Sethost module: Adds the /SETHOST command
+# See m_chghost for how to customise valid chars for hostnames
+#<module name="m_sethost.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Setident module: Adds the /SETIDENT command
+#<module name="m_setident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SETNAME module: Adds the /SETNAME command
+#<module name="m_setname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show Whois module: Adds the +W usermode which allows opers
+# to see when they are whois'ed (can be annoying).
+#<module name="m_showwhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Shun module: Provides the /shun command, which stops a user executing 
+# all commands except PING and PONG.
+#<module name="m_shun.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spy module: Provides the ability to see the complete names list of 
+# channels an oper is not a member of
+#<module name="m_spy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL channel mode module: Adds support for SSL-only channels (+z).
+# does not do anything useful without a working SSL module (see below)
+#<module name="m_sslmodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Dummy ssl module: If you have other servers on your network which
+# have SSL, but your server does not have ssl enabled, you should load
+# this module, which will handle SSL metadata (e.g. the "Is using ssl"
+# field in the WHOIS information).
+#<module name="m_ssl_dummy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_gnutls.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_ssl_gnutls.so is too complex it describe here, see the wiki:      #
+# http://www.inspircd.org/wiki/GnuTLS_SSL_Module                      #
+#                                                                     #
+# NOTE: If you want to use this module to encrypt and sign your       #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file!                                            #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Info module: Allows users to retrieve information about other
+# user's peer SSL certificates and keys. This can be used by client
+# scripts to validate users. For this to work, one of m_ssl_gnutls.so
+# or m_ssl_openssl.so must be loaded. You must symlink the source for
+# this module from the directory src/modules/extra.
+#<module name="m_sslinfo.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_openssl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_ssl_openssl.so is too complex it describe here, see the wiki:     #
+# http://www.inspircd.org/wiki/OpenSSL_SSL_Module                     #
+#                                                                     #
+# NOTE: If you want to use this module to encrypt and sign your       #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file!                                            #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
+# stored within their SSL certificate and key pair.
+# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
+# be loaded. An extra value should be added to enabled opers, which
+# is in the following format: fingerprint="<hash>". For more information,
+# see the example in the oper blocks.
+#<module name="m_ssl_oper_cert.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Strip colour module: Adds the channel mode +S
+#<module name="m_stripcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SILENCE module: Adds support for /SILENCE
+#<module name="m_silence.so">
+#
+# Configuration tags:
+#
+#<silence maxentries="32">
+#
+# Sets the maximum number of entries on a users silence list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3          #
+# databases through a unified API. You must link the source for this  #
+# module from the directory src/modules/extra to src/modules, plus    #
+# the file m_sqlv2.h                                                  #
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_sqlite.so is more complex than described here, see the wiki for   #
+# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module  #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLutils module: Provides some utilities to SQL client modules, such
+# as mapping queries to users and channels. You must copy the source
+# for this module from the directory src/modules/extra/m_sqlutils.cpp
+# and src/modules/extra/m_sqlutils.h into /src/modules
+# Needed for, and loaded before: SQLauth and SQLoper
+#<module name="m_sqlutils.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL authentication module: Allows IRCd connections to be tied into
+# a database table (for example a forum). You must copy the source for
+# this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+#<module name="m_sqlauth.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# m_sqlauth.so is too complex it describe here, see the wiki:         #
+# http://www.inspircd.org/wiki/SQL_Authentication_Module              #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL logging module: Allows you to log network-wide data for your
+# network in a fully normalised set of SQL tables. You must copy the
+# source for this module from the directory src/modules/extra
+#<module name="m_sqllog.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-  SQLLOG CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# dbid       - Database ID to use (see m_sql)                         #
+#                                                                     #
+# See also: http://www.inspircd.org/wiki/SQL_Logging_Module           #
+#                                                                     #
+#<sqllog dbid="1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL oper module: Allows you to store oper credentials in an SQL table
+# You must copy the source for this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+#<module name="m_sqloper.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# dbid       - Database ID to use (see m_sql)                         #
+# hash       - Hashing provider to use for password hashing           #
+#                                                                     #
+# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module      #
+#                                                                     #
+#<sqloper dbid="1" hash="md5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be   #
+# added/removed by Services.                                          #
+#<module name="m_svshold.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
+#<module name="m_swhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Taxonomy module: Adds the /TAXONOMY command, used to view all
+#                  metadata attached to a user.
+#<module name="m_taxonomy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test command module: Does nothing significant. Read: pointless.
+#<module name="m_testcommand.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Timed bans module: Adds timed bans and the /TBAN command
+#<module name="m_timedbans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test line module: Adds the /TLINE command, used to test how many
+# users a /GLINE or /ZLINE etc would match.
+#<module name="m_tline.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# UHNAMES support module: Adds support for the IRCX style UHNAMES
+# extension, which displays ident and hostname in the names list for
+# each user, saving clients from doing a WHO on the channel. Note that
+# this module is not widely supported yet. If a client does not support
+# UHNAMES it will not enable it, this will not break incompatible
+# clients.
+#<module name="m_uhnames.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Uninvite module: Adds the /UNINVITE command which lets users remove
+# pending invites from channels without waiting for the user to join.
+#<module name="m_uninvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Userip module: Adds the /USERIP command
+#<module name="m_userip.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Vhost module: Adds the VHOST command which allows for adding virtual
+# hosts which are accessible using a username and password in the config.
+#<module name="m_vhost.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#-#
+#                                                                     #
+# user       - Username for the vhost.                                #
+#                                                                     #
+# pass       - Password for the vhost.                                #
+#                                                                     #
+# host       - Vhost to set.                                          #
+#
+#<vhost user="some_username" pass="some_password" host="some.host">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Watch module: Adds the WATCH command, which is used by clients to 
+# maintain notify lists.
+#<module name="m_watch.so">
+#
+# Configuration tags:
+#
+#<watch maxentries="32">
+#
+# Sets the maximum number of entries on a user's watch list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
+# in a file "xline.db" which can be re-loaded on restart. This is useful
+# for two reasons: it keeps bans so users may not evade them, and on
+# bigger networks, server connections will take less time as there will
+# be a lot less bans to apply - as most of them will already be there.
+#<module name="m_xline_db.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XMLSocket module: Adds support for connections using the shockwave
+# flash XMLSocket. Note that this does not work if the client you are
+# using has retarded ideas of the IRC protocol. Your client must still
+# send RFC-correct lines to the server, this module only changes the
+# line ending from newlines to null terminators.
+#
+#<module name="m_xmlsocket.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ZipLinks module: Adds support for zlib deflate on server to server
+# connections. Both ends of the connection must load this module.
+#
+#<module name="m_ziplink.so">
+#
+# To use this module, you must enable it as a transport type in your
+# <link> tags or <bind> tags using the transport name 'zip'.
+# See the documentation of <link> and <bind>, respectively.
+#