summaryrefslogtreecommitdiff
path: root/conf/modules.conf
diff options
context:
space:
mode:
authorw00t <w00t@e03df62e-2008-0410-955e-edbf42e46eb7>2008-07-12 10:24:19 +0000
committerw00t <w00t@e03df62e-2008-0410-955e-edbf42e46eb7>2008-07-12 10:24:19 +0000
commitc0cf560ec2b00f5829a7a40d9c3011cfc845bad6 (patch)
tree63a18ac8a061c052df1f87482b8c4730ea7cda6f /conf/modules.conf
parent5ba37c89f65c0d13548e3d842724bf0f4c9244e7 (diff)
Split example conf into example conf and modules conf, include modules conf from the main example. This should provide a slightly less heavy introduction to things.
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@9970 e03df62e-2008-0410-955e-edbf42e46eb7
Diffstat (limited to 'conf/modules.conf')
-rw-r--r--conf/modules.conf1437
1 files changed, 1437 insertions, 0 deletions
diff --git a/conf/modules.conf b/conf/modules.conf
new file mode 100644
index 000000000..db255cca3
--- /dev/null
+++ b/conf/modules.conf
@@ -0,0 +1,1437 @@
+#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# These tags define which modules will be loaded on startup by your #
+# server. Add modules without any paths. When you make your ircd #
+# using the 'make' command, all compiled modules will be moved into #
+# the folder you specified when you ran ./configure. The module tag #
+# automatically looks for modules in this location. #
+# If you attempt to load a module outside of this location, either #
+# in the config, or via /LOADMODULE, you will receive an error. #
+# #
+# By default, ALL modules are commented out. You must uncomment them #
+# or add lines to your config to load modules. Please refer to #
+# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
+# each modules link for any additional conf tags they require. #
+# #
+# You may use wildcards in a <module> tag to load all modules which #
+# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
+# m_sapart, m_saquit and m_sanick) #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# To link servers to InspIRCd, you MUST load the m_spanningtree #
+# module, as shown below. If you DO NOT do this, server links will #
+# NOT work at all. ie. The ports will NOT bind, and /connect will not #
+# work properly. This is by design, to allow for the implementation #
+# of other linking protocols in modules in the future. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spanning Tree module - allows linking of servers using the spanning
+# tree protocol (see the READ THIS BIT section above).
+#
+#<module name="m_spanningtree.so">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MD5 Module - Allows other modules to generate MD5 hashes, usually for
+# cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_cloaking.so and m_password_hash.so may rely on
+# this module being loaded to function.
+#
+#<module name="m_md5.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA256 Module - Allows other modules to generate SHA256 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_password_hash.so may rely on this module being
+# loaded to function. Certain modules such as m_spanningtree.so will
+# function without this module but when it is loaded their features will
+# be enhanced (for example the addition of HMAC authentication).
+#
+#<module name="m_sha256.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules may rely on this module being loaded to function.
+#<module name="m_ripemd160.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Abbreviation module: Provides the ability to abbreviate commands a-la
+# BBC BASIC keywords.
+#<module name="m_abbreviation.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alias module: Allows you to define server-side command aliases
+#<module name="m_alias.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_alias.so module loaded, you may also define #
+# aliases as shown below. They are commonly used to provide shortcut #
+# commands to services, however they are not limited to just this use.#
+# An alias tag requires the following values to be defined in it: #
+# #
+# text - The text to detect as the actual command line, #
+# Cant contain spaces, but case insensitive. #
+# You may have multiple aliases with the same #
+# command name (text="" value), however the first #
+# found will be executed if its format value is #
+# matched, or it has no format value. Aliases are #
+# read from the top of the file to the bottom. #
+# #
+# format - If this is defined, the parameters of the alias #
+# must match this glob pattern. For example if you #
+# want the first parameter to start with a # for #
+# the alias to be executed, set format="#*" in the #
+# alias definition. Note that the :'s which are #
+# part of IRC formatted lines will be preserved #
+# for matching of this text. This value is #
+# optional. #
+# #
+# replace - The text to replace 'text' with. Usually this #
+# will be "PRIVMSG ServiceName :$2-" or similar. #
+# You may use the variables $1 through $9 in the #
+# replace string, which refer to the first through #
+# ninth word in the original string typed by the #
+# user. You may also use $1- through $9- which #
+# refer to the first word onwards, through to the #
+# ninth word onwards, e.g. if the user types the #
+# command "foo bar baz qux quz" then $3- will hold #
+# "baz qux quz" and $2 will contain "bar". You may #
+# also use the special variables: $nick, $ident, #
+# $host and $vhost, and you may separate multiple #
+# commands with \n. If you wish to use the ACTUAL #
+# characters \ and n together in a line, you must #
+# use the sequence "\\n". #
+# #
+# requires - If you provide a value for 'requires' this means #
+# the given nickname MUST be online for the alias #
+# to successfully trigger. If they are not, then #
+# the user receives a 'no such nick' 401 numeric. #
+# #
+# uline - Defining this value with 'yes', 'true' or '1' #
+# will ensure that the user given in 'requires' #
+# must also be on a u-lined server, as well as #
+# actually being on the network. If the user is #
+# online, but not on a u-lined server, then an #
+# oper-alert is sent out as this is possibly signs #
+# of a user trying to impersonate a service. #
+# #
+# operonly - Defining this value, with a value of 'yes', '1' #
+# or true will make the alias oper only. If a non- #
+# oper attempts to use the alias, it will appear #
+# to not exist. #
+# #
+#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+# requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+# requires="NickServ" uline="yes">
+#
+# This alias fixes a glitch in xchat 2.6.x and above and the way it
+# assumes IDENTIFY must be prefixed by a colon (:) character. It should
+# be placed ABOVE the default NICKSERV alias (the first example) listed
+# above.
+#
+#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
+# requires="NickServ" uline="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alltime module: Shows time on all connected servers at once
+#<module name="m_alltime.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+#<module name="m_antibear.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibottler module: Labels bottler leech bots
+#<module name="m_antibottler.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Auditorium module: Adds channel mode +u which makes everyone else
+# except you in the channel invisible, used for large meetings etc.
+#<module name="m_auditorium.so">
+#
+# Auditorium settings:
+#
+#<auditorium showops="no" operoverride="no">
+#
+# showops:
+# Setting this value to yes makes m_auditorium behave like unrealircd
+# +u channel mode, e.g. ops see users joining, parting, etc, and users
+# joining the channel see the ops. Without this flag, the mode acts
+# like ircnet's +a (anonymous channels), showing only the user in the
+# names list, and not even showing the ops in the list, or showing the
+# ops that the user has joined.
+# operoverride:
+# Setting this value to yes makes m_auditorium affect the userlist for
+# regular users only. Opers will view all users in the channel normally.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban except module: Adds support for channel ban exceptions (+e)
+#<module name="m_banexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban redirection module: Allows bans which redirect to a specified
+# channel. e.g. +b nick!ident@host#channelbanneduserissentto
+#<module name="m_banredirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+#<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_blockamsg.so module loaded, you can configure it #
+# with the <blockamsg> tag: #
+# #
+# delay - How many seconds between two messages to force #
+# them to be recognised as unrelated. #
+# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
+# or 'killopers'. Define how to take action when #
+# a user uses /amsg or /ame. #
+#
+#<blockamsg delay="3" action="killopers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block CAPS module: Blocking all-CAPS messages with cmode +B
+#<module name="m_blockcaps.so">
+# #
+#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# percent - How many percent of text must be caps before text #
+# will be blocked. #
+# #
+# minlen - The minimum length a line must be for the block #
+# percent to have any effect. #
+# #
+# capsmap - A list of chars to be considered CAPS, this was #
+# you can add CAPS for your language. Also you can #
+# add things like ! and space to further lock down #
+# on caps usage. #
+#<blockcaps percent="50"
+# minlen="5"
+# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block colour module: Blocking colour-coded messages with cmode +c
+#<module name="m_blockcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Botmode module: Adds the user mode +B
+#<module name="m_botmode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CallerID module: Adds usermode +g which activates hybrid-style
+# callerid (== block all private messages unless you /accept first)
+#<module name="m_callerid.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# maxaccepts - Maximum number of entires a user can add to his #
+# /accept list. Default is 16 entries. #
+# operoverride - Can opers (note: ALL opers) ignore callerid mode? #
+# Default is no. #
+# tracknick - Preserve /accept entries when a user changes nick? #
+# If no (the default), the user is removed from #
+# everyone's accept list if he changes nickname. #
+# cooldown - Amount of time (in seconds) that must pass since #
+# the last notification sent to a user before he can #
+# be sent another. Default is 60 (1 minute). #
+#<callerid maxaccepts="16"
+# operoverride="no"
+# tracknick="no"
+# cooldown="60"
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CAP module: Provides the CAP negotiation mechanism seen in
+# ratbox-derived ircds
+#<module name="m_cap.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CBAN module: Lets you disallow channels from being used at runtime.
+#<module name="m_cban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Censor module: Adds the channel mode +G
+#<module name="m_censor.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_censor module, then you must #
+# specify some censor tags. See also: #
+# http://www.inspircd.org/wiki/Censor_Module #
+#
+#<include file="censor.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
+# (http://cgiirc.sourceforge.net).
+#<module name="m_cgiirc.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you specify to use m_cgiirc, then you must specify one
+# or more cgihost tags which indicate authorised CGI:IRC servers which
+# will be connecting to your network, and an optional cgiirc tag.
+# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
+#
+# Set to yes if you want to notice opers when CGI clients connect
+# <cgiirc opernotice="no">
+#
+# The type field indicates where the module should get the real
+# client's IP address from, for further information, please see the
+# CGI:IRC documentation.
+#
+# Old style:
+# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
+# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
+# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
+# New style:
+# <cgihost type="webirc" pass="foobar"
+# mask="somebox.mysite.com"> # Get IP from WEBIRC
+#
+# IMPORTANT NOTE:
+# ---------------
+#
+# When you connect CGI:IRC clients, there are two connect classes which
+# apply to these clients. When the client initially connects, the connect
+# class which matches the cgi:irc site's host is checked. Therefore you
+# must raise the maximum local/global clients for this ip as high as you
+# want to allow cgi clients. After the client has connected and is
+# determined to be a cgi:irc client, the class which matches the client's
+# real IP is then checked. You may set this class to a lower value, so that
+# the real IP of the client can still be restricted to, for example, 3
+# sessions maximum.
+#
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel create module: Adds snomask +j, which will notify opers of
+# any new channels that are created
+#<module name="m_chancreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel filter module: Allows channel-op defined message
+# filtering using simple string matches (channel mode +g)
+#<module name="m_chanfilter.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Chanprotect module: gives +q and +a channel modes
+#<module name="m_chanprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Check module: gives /check
+# Check is useful for looking up information on channels,
+# users, IP addresses and hosts.
+#<module name="m_check.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGHOST module: Adds the /CHGHOST command
+#<module name="m_chghost.so">
+#
+#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
+# Optional - If you want to use special chars for hostnames you can #
+# specify your own custom list of chars with the <hostname> tag: #
+# #
+# charmap - A list of chars accepted as valid by the /CHGHOST #
+# and /SETHOST commands. Also note that the list is #
+# case-sensitive. #
+#<hostname charmap="abcdefghijklmnopqrstuvwxyz.-_/0123456789">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGIDENT module: Adds the /CHGIDENT command
+#<module name="m_chgident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGNAME module: Adds the /CHGNAME command
+#<module name="m_chgname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Cloaking module: Adds usermode +x and cloaking support.
+# Relies on the module m_md5.so being loaded before m_cloaking.so in
+# the configuration file.
+#<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify the m_cloaking.so module as above, you #
+# must define cloak keys, and optionally a cloak prefix as shown #
+# below. When using cloaking, the cloak keys are MANDITORY and must #
+# be included. However, if prefix is not included, it will default #
+# to your networks name from the <server> tag. You can also include #
+# the following optional values: #
+# #
+# ipalways - Always cloak the IP address, not the hostname, #
+# which doesn't reveal the user's ISP, but #
+# results in hosts that are harder to read and #
+# ban. #
+# #
+# lowercase - Display the cloaked hostnames in lowercase #
+# characters instead of uppercase #
+# #
+# <cloak key1="0x2AF39F40" #
+# key2="0x78E10B32" #
+# key3="0x4F2D2E82" #
+# key4="0x043A4C81" #
+# prefix="mynet" #
+# ipalways="false" #
+# lowercase="false"> #
+# #
+# Please note that the key values will accept any number, and should #
+# be large numbers. Using small numbers such as "7" or "1924" will #
+# seriously weaken the security of your cloak. It is recommended you #
+# use hexdecimal numbers prefixed by "0x", as shown in this example, #
+# with each key eight hex digits long. #
+
+#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Close module: Allows an oper to close all unregistered connections.
+#<module name="m_close.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Clones module: Adds an oper command /CLONES for detecting cloned
+# users. Warning: This module may be resource intensive when its
+# command is issued, use with care.
+#<module name="m_clones.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Common channels module: Adds user mode +c, which, when set, requires
+# that users must share a common channel with you to PRIVMSG or NOTICE
+# you.
+#<module name="m_commonchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Join: Allows you to force users to join one or more channels
+# automatically upon connecting to the server.
+#<module name="m_conn_join.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# If you have m_conn_join.so loaded, you can configure it using the
+# follow values:
+#
+#<autojoin channel="#one,#two,#three">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Usermodes: Set modes on users when they connect
+# When this module is loaded <connect:allow> tags may have an optional
+# modes="" value, which contains modes to add or remove from users
+# when they connect to the server.
+#<module name="m_conn_umodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Wait-for-Pong: Don't let a user connect until they PONG
+#<module name="m_conn_waitpong.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_conn_waitpong.so module loaded, configure it with #
+# the <waitpong> tag: #
+# #
+# sendsnotice - Whether to send a snotice on connect, like other #
+# older ircds #
+# #
+# killonbadreply - Whether to kill the user if they send the wrong #
+# PONG reply. #
+# #
+#<waitpong sendsnotice="yes" killonbadreply="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel cycle module. Server side /hop, with +ilk etc bypass.
+#<module name="m_cycle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connectban: Provides per-IP connection throttling. Any IP that disconnects
+# too many times (configurable) in an hour is zlined for a (configurable)
+# duration, and their count resets to 0.
+#
+# NOTE: This module may change name/behaviour later in 1.2. Please make sure
+# you read release announcements!
+#
+#<connectban threshold="10" duration="10m">
+# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
+#
+#<module name="m_connectban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection throttle module. Configuration:
+#<module name="m_connflood.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# seconds, maxconns - Amount of connections per <seconds>.
+#
+# timeout - Time to wait after the throttle was activated
+# before deactivating it. Be aware that the time
+# is seconds + timeout.
+#
+# quitmsg - The message that users get if they attempt to
+# connect while the throttle is active.
+#
+# bootwait - Amount of time to wait before enforcing the
+# throttling when the server just booted.
+#
+#<connflood seconds="30" maxconns="3" timeout="30"
+# quitmsg="Throttled" bootwait="10">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Custom title module: Adds the /TITLE command which allows for trusted
+# users to gain a custom whois line and a optional
+# vhost can be specified.
+#<module name="m_customtitle.so">
+#
+#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# name - The username used to identify
+# password - The password used to identify
+# host - Allowed hostmask [optional]
+# title - Title shown in whois
+# vhost - Displayed host [optional]
+#
+#<title name="foo" password="bar" title="Official Chat Helper">
+#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DCCALLOW module: Adds the /DCCALLOW command
+#<module name="m_dccallow.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# blockchat - Whether to block DCC CHAT as well as DCC SEND
+# length - Default duration of entries in DCCALLOW list
+# action - Default action to take if no action is specified
+# can be 'block' or 'allow'
+#
+# File configuration:
+# pattern - The glob pattern to match against
+# action - Action to take if a user attempts to send a file
+# that matches this pattern, can be 'block' or 'allow'
+#
+#<dccallow blockchat="yes" length="5m" action="block">
+#<banfile pattern="*.exe" action="block">
+#<banfile pattern="*.txt" action="allow">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deaf module: adds support for ircu style usermode +d - deaf to
+# channel messages and channel notices.
+#<module name="m_deaf.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay join module: Adds the channel mode +D which delays all JOIN
+# messages from users until they speak. If they quit or part before
+# speaking, their quit or part message will not be shown to the channel
+# which helps cut down noise on large channels in a more friendly way
+# than the auditorium mode. Only channel ops may set the +D mode.
+#<module name="m_delayjoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deny Channels: Deny Channels from being used by users
+#<module name="m_denychans.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_denychans.so module loaded, you need to specify #
+# the channels to deny: #
+# #
+# name - The channel name to deny. (glob masks are ok) #
+# #
+# allowopers - If operators are allowed to override the deny. #
+# #
+# reason - Reason given for the deny. #
+# #
+# redirect - Redirect the user to a different channel #
+# #
+#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
+#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
+# #
+# Redirects will not work if the target channel is set +L. #
+# #
+# Additionally, you may specify channels which are allowed, even if #
+# a badchan tag specifies it would be denied: #
+#<goodchan name="#godsleeps"> #
+# Glob masks are accepted here also.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Devoice Module: Let users devoice themselves.
+#<module name="m_devoice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DNS Blacklist Module: Provides support for looking up IPs on one or #
+# more blacklists. #
+#<module name="m_dnsbl.so"> #
+# #
+# For configuration options please see the wiki page for m_dnsbl at #
+# http://inspircd.org/wiki/DNS_Blacklist_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Filter module: Provides glob-based message filtering
+#<module name="m_filter.so">
+# OR
+# PCRE filter module: Filters messages using regular expressions
+#<module name="m_filter_pcre.so">
+#
+# You may only use one or the other with these modules, network-wide.
+#
+#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_filter or m_filter_pcre #
+# modules, then specfiy below the path to the filter.conf file, #
+# or define some <filter> tags. #
+# #
+#<include file="filter.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Foobar module: does nothing - historical relic
+#<module name="m_foobar.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GeoIP module: Allows the server admin to ban users by country code.
+#<module name="m_geoip.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# <geoip banunknown="false"> #
+# #
+# Set this value to true or yes to block unknown IP ranges which are #
+# not in the database (usually LAN addresses, localhost, etc) #
+# #
+# <geoban country="TR" reason="This country not permitted"> #
+# #
+# Use one or more of these tags to ban countries by country code. #
+# The country code must be in capitals and should be an ISO country #
+# code such as TR, GB, or US. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Globops module: gives /GLOBOPS and usermode +g
+#<module name="m_globops.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Global load module: Allows loading and unloading of modules network-
+# wide (USE WITH EXTREME CAUTION!)
+#<module name="m_globalload.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HELPOP module: Provides the /HELPOP command
+#<module name="m_helpop.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_helpop.so module, then #
+# specify below the path to the helpop.conf file, or if you like to #
+# make a mess, define your helpop tags in this conf. #
+# #
+#<include file="helpop.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDECHANS module: Allows opers to hide their channels list from non-
+# opers by setting user mode +I on themselves.
+# <module name="m_hidechans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDEOPER module: Allows opers to hide their oper status from non-
+# opers by setting user mode +H on themselves.
+# <module name="m_hideoper.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hostchange module: Allows a different style of cloaking
+#<module name="m_hostchange.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you choose to use the m_hostchange.so module. #
+# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
+# #
+#<host suffix="polarbears.org" separator="." prefix="">
+#<hostchange mask="*@fbi.gov" action="addnick">
+#<hostchange mask="*r00t@*" action="suffix">
+#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
+#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# httpd module: Provides http server support for InspIRCd
+#<module name="m_httpd.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you choose to use the m_httpd.so module, then you must
+# specify the port number and other details of your http server:
+#
+#<http ip="192.168.1.10" host="brainwave" port="32006"
+# index="/home/brain/inspircd/http/index.html">
+#
+# You may have as many of these tags as you wish, each with a different
+# IP, port, host or index file. Each one will act as an independent
+# HTTP server.
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http ACL module: Provides access control lists for m_httpd dependent
+# modules. Use this module to restrict pages by IP address and by
+# password.
+#
+#<module name="m_httpd_acl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Restrict access to the m_httpd_stats module to all but the local
+# network and when the correct password is specified:
+#
+# <httpdacl path="/stats*" types="password,whitelist"
+# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
+#
+# Deny all connections to all but the main index page:
+#
+# <httpdacl path="/*" types="blacklist" blacklist="*">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http config module: Allows the server's configuration to be viewed
+# over HTTP. Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_config.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http stats module: Provides basic stats pages over HTTP
+# Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_stats.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+#
+#<httpstats stylesheet="http://remote.style/sheet.css">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ident: Provides RFC 1413 ident lookup support
+#<module name="m_ident.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you are using the m_ident.so module, then you can #
+# specify the timeout for ident lookups here. If not defined, it will #
+# default to one second. This is a non-blocking timeout which holds #
+# the user in a 'connecting' state until the lookup is complete. #
+# The bind value indicates which IP to bind outbound requests to. #
+# #
+#<ident timeout="5" bind="">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invite except module: Adds support for channel invite exceptions (+I)
+#<module name="m_inviteexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invisible module - Adds support for usermode +Q (quiet) which lets an
+# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
+# opers are still able to see invisible users, and if an oper with +Q
+# deopers, they will become visible.
+#
+# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
+# must first add the value canquiet="yes" to that oper's type tag.
+#
+#<module name="m_invisible.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Join flood module: Adds support for join flood protection (+j)
+#<module name="m_joinflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Jump Server module: Adds support for the RPL_REDIR numeric
+#<module name="m_jumpserver.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
+#<module name="m_kicknorejoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Knock module: adds the /KNOCK command and +K channel mode
+#<module name="m_knock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP authentication module: Adds the ability to authenticate users #
+# via LDAP. This is an extra module which must be enabled explicitly #
+# by symlinking it from modules/extra, and requires the OpenLDAP libs #
+# #
+#<module name="m_ldapauth.so"> #
+# #
+# Configuration: #
+# #
+# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
+# attribute="uid" #
+# server="ldap://brainwave.brainbox.cc" #
+# allowpattern="Guest*" #
+# killreason="Access denied" #
+# searchscope="subtree" #
+# binddn="cn=Manager,dc=brainbox,dc=cc" #
+# bindauth="mysecretpass" #
+# verbose="yes"> #
+# #
+# The baserdn indicates the base DN to search in for users. Usually #
+# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
+# #
+# The attribute value indicates the attribute which is used to locate #
+# a user account by name. On POSIX systems this is usually 'uid'. #
+# #
+# The server parameter indicates the LDAP server to connect to. The #
+# ldap:// style scheme before the hostname proper is MANDITORY. #
+# #
+# The allowpattern value allows you to specify a wildcard mask which #
+# will always be allowed to connect regardless of if they have an #
+# account, for example guest users. #
+# #
+# Killreason indicates the QUIT reason to give to users if they fail #
+# to authenticate. #
+# #
+# The searchscope value indicates the subtree to search under. On our #
+# test system this is 'subtree'. Your mileage may vary. #
+# #
+# Setting the verbose value causes an oper notice to be sent out for #
+# every failed authentication to the server, with an error string. #
+# #
+# The binddn and bindauth indicate the DN to bind to for searching, #
+# and the password for the distinguished name. Some LDAP servers will #
+# allow anonymous searching in which case these two values do not #
+# need defining, otherwise they should be set similar to the examples #
+# above. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
+# used to temporarily close/open for new connections to the server. #
+# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
+# are specified in a <class> tag that the oper is part of. This is so #
+# you can control who has access to this possible dangerous command. #
+# If your server is locked and you got disconnected, do a REHASH from #
+# shell to open up again.
+#<module name="m_lockserv.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Msg flood module: Adds message/notice flood protection (+f)
+#<module name="m_messageflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MsSQL module: Allows other SQL modules to access MS SQL Server
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mssql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mssql.so is more complex than described here, see wiki for more #
+# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
+#
+#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MySQL module: Allows other SQL modules to access MySQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mysql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mysql.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# NAMESX module: Provides support for the NAMESX extension which allows
+# clients to see all the prefixes set on a user without getting confused.
+# This is supported by mIRC, x-chat, klient, and maybe more.
+#<module name="m_namesx.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickban: Implements extended ban n:, which stops anyone matching
+# a mask like +b n:nick!user@host from changing their nick on channel.
+#<module name="m_nickban.so">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
+# Provides channel mode +F.
+#<module name="m_nickflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nicklock module: Let opers change a user's nick and then stop that
+# user from changing their nick again.
+#<module name="m_nicklock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No ctcp module: Adds the channel mode +C to block CTCPs
+#<module name="m_noctcp.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Noinvite module: Gives channel mode +V
+#<module name="m_noinvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No kicks module: Adds the +Q channel mode
+#<module name="m_nokicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No nicks module: Adds the +N channel mode
+#<module name="m_nonicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T
+#<module name="m_nonotice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper channels mode: Adds the +O channel mode
+#<module name="m_operchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper flood module: Removes flood limits from users upon opering up
+#<module name="m_operflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper Join module: Auto-joins opers to a channel upon oper-up
+#<module name="m_operjoin.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_operjoin.so module, specify options here: #
+# #
+# channel - The channel name to join, can also be a comma #
+# seperated list eg. "#channel1,#channel2". #
+# #
+# override - Lets the oper join walking thru any modes that #
+# might be set, even bans. Use "yes" or "no". #
+# #
+#<operjoin channel="#channel" override="no">
+#
+# Alternatively you can use the autojoin="channellist" in a <type> #
+# tag to set specific autojoins for a type of oper, for example: #
+#
+#<type name="Helper" autojoin="#help" classes="...">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper log module: Logs all oper commands to the ircd log at default
+# loglevel.
+#<module name="m_operlog.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper MOTD module: Provides support for seperate message of the day
+# on oper-up
+#<module name="m_opermotd.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_opermotd.so module, specify the motd here #
+# #
+#<opermotd file="oper.motd">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Override module: Adds support for oper override
+#<module name="m_override.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_override.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/Oper_Override_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper levels module: Gives each oper a level and prevents
+# actions being taken against higher level opers
+# Specify the level as the 'level' parameter of the <type> tag
+#<module name="m_operlevels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper modes module: Allows you to specify modes to add/remove on oper
+# Specify the modes as the 'modes' parameter of the <type> tag
+# and/or as the 'modes' parameter of the <oper> tag.
+#<module name="m_opermodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper password hash module: Allows hashed oper passwords
+# Relies on the module m_md5.so and/or m_sha256.so being loaded before
+# m_password_hash.so in the configuration file.
+#<module name="m_password_hash.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# To use this module, you must define a hash type for each oper's
+# password you want to hash. For example:
+#
+# <oper name="Brain"
+# host="ident@dialup15.isp.com"
+# hash="sha256"
+# password="a41d730937a53b79f788c0ab13e9e1d5"
+# type="NetAdmin">
+#
+# The types of hashing available vary depending on which hashing modules
+# you load, but usually if you load m_sha256.so and m_md5.so, both md5
+# and sha256 type hashing will be available (the most secure of which
+# is SHA256).
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Permanent Channels module: Channels with the permanent channels mode
+# will remain open even after everyone else has left the channel, and
+# therefore keep things like modes, ban lists and topic. Permanent
+# channels -may- need support from your Services package to function
+# properly with them. This adds channel mode +P.
+#<module name="m_permchannels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# PostgreSQL module: Allows other SQL modules to access PgSQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_pgsql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_pgsql.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Proxy scan module: Scans locally connecting clients for proxies.
+#<module name="m_proxyscan.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Quietban: Implements extended ban q:, which stops anyone matching
+# a mask like +b q:nick!user@host from speaking on channel.
+#<module name="m_quietban.so">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Random Quote module: provides a random quote on connect.
+# NOTE: Some of these may mimic fatal errors and confuse users and
+# opers alike! - BEWARE!
+#<module name="m_randquote.so">
+#
+#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_randquote.so module, then #
+# specify below the path to the randquotes.conf file. #
+# #
+#<randquote file="randquotes.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Redirect module: Adds channel redirection (mode +L)
+#<module name="m_redirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Registered users only channel creation
+# Allows only registered users and opers to create new channels.
+#<module name="m_regonlycreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK
+#<module name="m_remove.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict banned users module:
+# Disallows banned users on a channel from messaging the channel,
+# changing nick, or changing the topic, if loaded.
+#<module name="m_restrictbanned.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restricted channels module: Allows only opers to create channels
+#<module name="m_restrictchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict message module: Allows users to only message opers
+#<module name="m_restrictmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban users through regular expression patterns
+#<module name="m_rline.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# If you wish to re-check a user when they change nickname (can be
+# useful under some situations, but *can* also use CPU with more users
+# on a server) then set the following configuration value:
+#<rline matchonnickchange="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# JSON-RPC module: Encode and decode JSON-RPC requests for modules
+#<module name="m_rpc_json.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RPC test module: A test of the RPC API
+#<module name="m_rpctest.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Provide /LIST throttling (to prevent flooding) and /LIST safety to
+# prevent excess flood when the list is large.
+#<module name="m_safelist.so">
+#
+#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# When using Safelist, you may set the following values;
+#
+# The first value, 'throttle', sets the amount of time in seconds a user
+# must wait between LIST commands. For example, if this is set to 60
+# (the default) then the user may not /LIST more than once a minute.
+# If not defined, the default value is 60 seconds.
+#
+# The second value, 'maxlisters', indicates the maximum number of users
+# which may be retrieving a LIST at once. It is not recommended you raise
+# this value, as increasing it too high can make your network vulnerable
+# to floodbots which waste your bandwidth and CPU time with LIST requests.
+#
+#<safelist throttle="60" maxlisters="50">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAJOIN module: Adds the /SAJOIN command
+#<module name="m_sajoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAMODE module: Adds the oper /SAMODE command
+#<module name="m_samode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SANICK module: Allows opers to change user's nicks
+#<module name="m_sanick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAPART module: Adds the oper /SAPART command
+#<module name="m_sapart.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
+#<module name="m_saquit.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SASL authentication module: Provides support for IRC Authentication
+# Layer (aka: atheme SASL) via AUTHENTICATE.
+#<module name="m_sasl.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+#<module name="m_securelist.so">
+#
+#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Securelist can be harmful to some irc search engines such as #
+# netsplit.de and searchirc.com. To prevent securelist blocking these #
+# sites from listing, define exception tags as shown below: #
+<securehost exception="*@*.searchirc.org">
+<securehost exception="*@*.netsplit.de">
+<securehost exception="*@echo940.server4you.de">
+# #
+# Define the following variable to change how long a user must wait #
+# before issuing a LIST. If not defined, defaults to 60 seconds. #
+# #
+#<securelist waittime="60"> #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Servprotect module: Provides support for Austhex style +k /
+# UnrealIRCD +S services mode
+#<module name="m_servprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# See nicks module: Allow for SNOMASK +N which shows nick changes.
+#<module name="m_seenicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Set Idle module: Adds a command for opers to change their
+# idle time (mainly a toy)
+#<module name="m_setidle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via user mode +r, which
+# is similar to the DALnet and dreamforge systems.
+#
+# N O T E!!
+# >> This CAN NOT be used at the same time as m_services_account <<
+# N O T E!!
+#<module name="m_services.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via account names (AC)
+# and is similar in operation to the way asuka and ircu handle services.
+#
+# N O T E!!
+# >> This CAN NOT be used at the same time as m_services <<
+# N O T E!!
+#<module name="m_services_account.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Sethost module: Adds the /SETHOST command
+# See m_chghost for how to customise valid chars for hostnames
+#<module name="m_sethost.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Setident module: Adds the /SETIDENT command
+#<module name="m_setident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SETNAME module: Adds the /SETNAME command
+#<module name="m_setname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show Whois module: Adds the +W usermode which allows opers
+# to see when they are whois'ed (can be annoying).
+#<module name="m_showwhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Shun module: Provides the /shun command, which stops a user executing
+# all commands except PING and PONG.
+#<module name="m_shun.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spy module: Provides the ability to see the complete names list of
+# channels an oper is not a member of
+#<module name="m_spy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL channel mode module: Adds support for SSL-only channels (+z).
+# does not do anything useful without a working SSL module (see below)
+#<module name="m_sslmodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Dummy ssl module: If you have other servers on your network which
+# have SSL, but your server does not have ssl enabled, you should load
+# this module, which will handle SSL metadata (e.g. the "Is using ssl"
+# field in the WHOIS information).
+#<module name="m_ssl_dummy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_gnutls.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Info module: Allows users to retrieve information about other
+# user's peer SSL certificates and keys. This can be used by client
+# scripts to validate users. For this to work, one of m_ssl_gnutls.so
+# or m_ssl_openssl.so must be loaded. You must symlink the source for
+# this module from the directory src/modules/extra.
+#<module name="m_sslinfo.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_openssl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_openssl.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
+# stored within their SSL certificate and key pair.
+# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
+# be loaded. An extra value should be added to enabled opers, which
+# is in the following format: fingerprint="<hash>". For more information,
+# see the example in the oper blocks.
+#<module name="m_ssl_oper_cert.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Strip colour module: Adds the channel mode +S
+#<module name="m_stripcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SILENCE module: Adds support for /SILENCE
+#<module name="m_silence.so">
+#
+# Configuration tags:
+#
+#<silence maxentries="32">
+#
+# Sets the maximum number of entries on a users silence list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3 #
+# databases through a unified API. You must link the source for this #
+# module from the directory src/modules/extra to src/modules, plus #
+# the file m_sqlv2.h #
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlite.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLutils module: Provides some utilities to SQL client modules, such
+# as mapping queries to users and channels. You must copy the source
+# for this module from the directory src/modules/extra/m_sqlutils.cpp
+# and src/modules/extra/m_sqlutils.h into /src/modules
+# Needed for, and loaded before: SQLauth and SQLoper
+#<module name="m_sqlutils.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL authentication module: Allows IRCd connections to be tied into
+# a database table (for example a forum). You must copy the source for
+# this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+#<module name="m_sqlauth.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlauth.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/SQL_Authentication_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL logging module: Allows you to log network-wide data for your
+# network in a fully normalised set of SQL tables. You must copy the
+# source for this module from the directory src/modules/extra
+#<module name="m_sqllog.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# #
+# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
+# #
+#<sqllog dbid="1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL oper module: Allows you to store oper credentials in an SQL table
+# You must copy the source for this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+#<module name="m_sqloper.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# hash - Hashing provider to use for password hashing #
+# #
+# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
+# #
+#<sqloper dbid="1" hash="md5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
+# added/removed by Services. #
+#<module name="m_svshold.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
+#<module name="m_swhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Taxonomy module: Adds the /TAXONOMY command, used to view all
+# metadata attached to a user.
+#<module name="m_taxonomy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test command module: Does nothing significant. Read: pointless.
+#<module name="m_testcommand.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Timed bans module: Adds timed bans and the /TBAN command
+#<module name="m_timedbans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test line module: Adds the /TLINE command, used to test how many
+# users a /GLINE or /ZLINE etc would match.
+#<module name="m_tline.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# UHNAMES support module: Adds support for the IRCX style UHNAMES
+# extension, which displays ident and hostname in the names list for
+# each user, saving clients from doing a WHO on the channel. Note that
+# this module is not widely supported yet. If a client does not support
+# UHNAMES it will not enable it, this will not break incompatible
+# clients.
+#<module name="m_uhnames.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Uninvite module: Adds the /UNINVITE command which lets users remove
+# pending invites from channels without waiting for the user to join.
+#<module name="m_uninvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Userip module: Adds the /USERIP command
+#<module name="m_userip.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Vhost module: Adds the VHOST command which allows for adding virtual
+# hosts which are accessible using a username and password in the config.
+#<module name="m_vhost.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# user - Username for the vhost. #
+# #
+# pass - Password for the vhost. #
+# #
+# host - Vhost to set. #
+#
+#<vhost user="some_username" pass="some_password" host="some.host">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Watch module: Adds the WATCH command, which is used by clients to
+# maintain notify lists.
+#<module name="m_watch.so">
+#
+# Configuration tags:
+#
+#<watch maxentries="32">
+#
+# Sets the maximum number of entries on a user's watch list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
+# in a file "xline.db" which can be re-loaded on restart. This is useful
+# for two reasons: it keeps bans so users may not evade them, and on
+# bigger networks, server connections will take less time as there will
+# be a lot less bans to apply - as most of them will already be there.
+#<module name="m_xline_db.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XMLSocket module: Adds support for connections using the shockwave
+# flash XMLSocket. Note that this does not work if the client you are
+# using has retarded ideas of the IRC protocol. Your client must still
+# send RFC-correct lines to the server, this module only changes the
+# line ending from newlines to null terminators.
+#
+#<module name="m_xmlsocket.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ZipLinks module: Adds support for zlib deflate on server to server
+# connections. Both ends of the connection must load this module.
+#
+#<module name="m_ziplink.so">
+#
+# To use this module, you must enable it as a transport type in your
+# <link> tags or <bind> tags using the transport name 'zip'.
+# See the documentation of <link> and <bind>, respectively.
+#