summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorbrain <brain@e03df62e-2008-0410-955e-edbf42e46eb7>2006-01-02 15:06:22 +0000
committerbrain <brain@e03df62e-2008-0410-955e-edbf42e46eb7>2006-01-02 15:06:22 +0000
commitcd76decd9b8d35d0c215d21922c46457f6226799 (patch)
treec9377c9d685058895bab723456ed7448d02e43d8
parent2cfcca8007d5fe3af11f51614d7b6c56e3cb242e (diff)
Updated example configuration file
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@2726 e03df62e-2008-0410-955e-edbf42e46eb7
-rw-r--r--docs/inspircd.conf.example160
1 files changed, 135 insertions, 25 deletions
diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example
index 7da7a1596..6d1ac6a8b 100644
--- a/docs/inspircd.conf.example
+++ b/docs/inspircd.conf.example
@@ -1,8 +1,17 @@
########################################################################
# #
-# --------------------------- #
-# InspIRCd Configuration File #
-# --------------------------- #
+# ___ ___ ____ ____ _ #
+# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
+# | || '_ \/ __| '_ \| || |_) | | / _` | #
+# | || | | \__ \ |_) | || _ <| |__| (_| | #
+# |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
+# |_| #
+# ____ __ _ _ _ #
+# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
+# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
+# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
+# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
+# |___/ #
# #
##################################||####################################
#||#
@@ -11,9 +20,22 @@
# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
-# Last updated on : 06/06/2005 #
+# Last updated on : 02/01/2006 #
# Written by : CC (cc@backchat.co.za) #
# Updated by : katsklaw (katsklaw@gmail.com) #
+# Updated by : brain (brain@inspircd.org) #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
+# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
+# if you've configured InspIRCd before, these probably indicate #
+# something new or different to this version and you SHOULD READ IT. #
+# #
########################################################################
@@ -59,13 +81,17 @@
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
# format. #
-# default - if the port type is 'servers' then this can be #
-# specified. If set to 'yes', it indicates that this #
-# port is the default route for all /connect commands.#
-# if you do not bind your default route to an #
-# external ip, or all ip's, you may have connection #
-# problems. #
-# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# If you want to link servers to InspIRCd you must load the #
+# m_spanningtree module! Please see the modules list below for #
+# information on how to load this module! If you do not load this #
+# module, server ports will NOT be bound! #
+# #
# Leaving address empty binds to all available interfaces #
# #
# Syntax is as follows: #
@@ -76,7 +102,7 @@
# #
<bind address="" port="6660" type="clients">
-<bind address="" port="7000" type="servers" default="yes">
+<bind address="" port="7000" type="servers">
<bind address="" port="7001" type="servers">
@@ -177,6 +203,16 @@
# Syntax is as follow: #
# <class name="name" commands="oper commands"> #
# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# You are not forced to give these classes the names given below. #
+# You can create your own named classes, if you want, in fact that #
+# is the whole idea of this system! #
+# #
<class name="Shutdown" commands="DIE RESTART REHASH">
<class name="ServerLink" commands="CONNECT SQUIT">
@@ -201,6 +237,16 @@
# Syntax is as follows: #
# <type name="name" classes="class name" host="oper hostmask"> #
# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# You are not forced to give these types the names given below. #
+# You can create your own named types, if you want, in fact that #
+# is the whole idea of this system! #
+# #
<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
@@ -218,8 +264,8 @@
# encryption not supported by inspircd. However, there #
# are modules that allow for oper password encryption. #
# #
-# host - host of client allowed to oper-up, more hostmasks #
-# seperated by spaces, wildcards accepted #
+# host - host of client allowed to oper-up. #
+# wildcards accepted #
# type - specified above, defines the kind of operator #
# #
# Syntax is as follows: #
@@ -240,17 +286,27 @@
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
-# name - The name is the canocial name of the server, it does #
-# not have to resolve - but it is expected to be sent #
-# in the remote servers connection info. #
-# ipaddr - Valid host or ip address for remote server. * #
-# port - Valid listening UDP port for remote server. #
-# sendpass - Password to send to create an outbound connection to #
-# this server. #
-# recvpass - Password to receive to accept an inbound connection #
-# from this server. #
-# autoconnect - Sets the server to autoconnect. Where x is the number #
-# (optional) of seconds between attempts. 300 = 5 minutes #
+# name - The name is the canocial name of the server, does #
+# not have to resolve - but it is expected to be sent #
+# in the remote servers connection info. #
+# ipaddr - Valid host or ip address for remote server. * #
+# #
+# port - The TCP port for the remote server. #
+# #
+# sendpass - Password to send to create an outbound connection #
+# to this server. #
+# #
+# recvpass - Password to receive to accept an inbound connection #
+# from this server. #
+# #
+# autoconnect - Sets the server to autoconnect. Where x is the num. #
+# (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
+# #
+# encryptionkey - Encryption key to be used for AES encryption, where #
+# supported. Links using the spanning tree protocol #
+# support AES. The encryption key must be EXACTLY 8, #
+# 16 or 32 characters in length for a 64, 128 or 256 #
+# bit key, respectively. #
# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
@@ -266,6 +322,17 @@
# you MUST put a.b.com into your link block, and NOT the IP address #
# of a.b.com. The system uses reverse resolution. #
# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# If you want to link servers to InspIRCd you must load the #
+# m_spanningtree module! Please see the modules list below for #
+# information on how to load this module! If you do not load this #
+# module, server links will NOT work! #
+# #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
@@ -298,6 +365,21 @@
# and you must define this otherwise nobody's host will resolve. The #
# timeout value is in seconds. #
# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# When choosing a server, be sure to choose one which will do a #
+# RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these #
+# recursive lookups itself, to save time and resources. The dns #
+# server recommended by the InspIRCd team is bind, available from the #
+# ISC website. If your DNS server does not do a recursive lookup, you #
+# will be able to notice this by the fact that none of your users are #
+# resolving even though the DNS server appears to be up! Most ISP and #
+# hosting provider DNS servers support recursive lookups. #
+# #
<dns server="127.0.0.1" timeout="5">
@@ -351,22 +433,27 @@
# Settings to define which features are useable on your server. #
# #
# prefixquit - a prefix for a client's quit message #
+# #
# loglevel - specifies what detail of messages to log in the #
# log file. You may select from debug, verbose, #
# default, sparse and none. #
# allowhalfop - allows the +h channel mode #
+# #
# noservices - If noservices is true, yes, or 1, then the first #
# user into a channel gets founder status. This is #
# only useful on networks running the m_chanprotect #
# module without services. #
+# #
# netbuffersize - size of the buffer used to receive data from #
# clients. The ircd may only read() this amount #
# of text in one go at any time. (OPTIONAL) #
+# #
# maxwho - The maximum number of results returned by a /WHO #
# query. This is to prevent /WHO being used as a #
# spam vector or means of flooding an ircd. The #
# default is 128, it is not recommended to raise it #
# above 1024. Values up to 65535 are permitted. #
+# #
# somaxconn - The maximum number of sockets that may be waiting #
# in the accept queue. This usually allows the ircd #
# to soak up more connections in a shorter space of #
@@ -376,10 +463,12 @@
# descriptors. Some systems may only allow this to #
# be up to 5 (ugh) while others such as FreeBSD will #
# default to a much nicer 128. #
+# #
# moduledir - This optional value indicates a runtime change of #
# the location where modules are to be found. This #
# does not add a supplementary directory. There can #
# only be one module path. #
+# #
# softlimit - This optional feature allows a defined softlimit. #
# if defined sets a soft maxconnections value, has #
# to be less than the ./configure maxclients #
@@ -414,6 +503,23 @@
# WINDOWS USERS PLEASE NOTE: You can still load these modules! They #
# are incorporated into the executable and can be loaded and removed #
# similarly to if they were in a ramdisk. #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# To link servers to InspIRCd, you MUST load the m_spanningtree #
+# module, as shown below. If you DO NOT do this, server links will #
+# NOT work at all. ie. The ports will NOT bind, and /connect will not #
+# work properly. This is by design, to allow for the implementation #
+# of other linking protocols in modules in the future. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spanning Tree module - allows linking of servers using the spanning
+# tree protocol (see the READ THIS BIT section above).
+#
+#<module name="m_spanningtree.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Foobar module - does nothing
@@ -634,6 +740,10 @@
# Oper modes module: Allows you to specify modes to add/remove on oper
#<module name="m_opermodes.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
+#<module name="m_swhois.so">
+
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #