diff options
| author | w00t <w00t@e03df62e-2008-0410-955e-edbf42e46eb7> | 2006-02-15 03:30:48 +0000 |
|---|---|---|
| committer | w00t <w00t@e03df62e-2008-0410-955e-edbf42e46eb7> | 2006-02-15 03:30:48 +0000 |
| commit | 10e91ca314cfbb533935534129f3adaf1333aed7 (patch) | |
| tree | b5bef543f4c12f3f2f6bf34a8e930a357185e0a0 | |
| parent | d7419af204666ad6c66a140efd1652164c326568 (diff) | |
- Moved example configuration from docs/ to conf/.. Why did we have two example confs?
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@3213 e03df62e-2008-0410-955e-edbf42e46eb7
| -rw-r--r-- | conf/inspircd.censor.example (renamed from docs/inspircd.censor.example) | 0 | ||||
| -rw-r--r-- | conf/inspircd.filter.example (renamed from docs/inspircd.filter.example) | 0 | ||||
| -rw-r--r-- | conf/inspircd.helpop-full.example (renamed from docs/inspircd.helpop-full.example) | 0 | ||||
| -rw-r--r-- | conf/inspircd.helpop.example (renamed from docs/inspircd.helpop.example) | 0 | ||||
| -rw-r--r-- | docs/inspircd.conf.example | 1183 |
5 files changed, 0 insertions, 1183 deletions
diff --git a/docs/inspircd.censor.example b/conf/inspircd.censor.example index 89730669f..89730669f 100644 --- a/docs/inspircd.censor.example +++ b/conf/inspircd.censor.example diff --git a/docs/inspircd.filter.example b/conf/inspircd.filter.example index 99e133256..99e133256 100644 --- a/docs/inspircd.filter.example +++ b/conf/inspircd.filter.example diff --git a/docs/inspircd.helpop-full.example b/conf/inspircd.helpop-full.example index d0f621d63..d0f621d63 100644 --- a/docs/inspircd.helpop-full.example +++ b/conf/inspircd.helpop-full.example diff --git a/docs/inspircd.helpop.example b/conf/inspircd.helpop.example index 34f47e2db..34f47e2db 100644 --- a/docs/inspircd.helpop.example +++ b/conf/inspircd.helpop.example diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example deleted file mode 100644 index f20f0c255..000000000 --- a/docs/inspircd.conf.example +++ /dev/null @@ -1,1183 +0,0 @@ -######################################################################## -# # -# ___ ___ ____ ____ _ # -# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | # -# | || '_ \/ __| '_ \| || |_) | | / _` | # -# | || | | \__ \ |_) | || _ <| |__| (_| | # -# |___|_| |_|___/ .__/___|_| \_\\____\__,_| # -# |_| # -# ____ __ _ _ _ # -# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ # -# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ # -# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | # -# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| # -# |___/ # -# # -##################################||#################################### - #||# -##################################||#################################### -# # -# This is an example of the config file for InspIRCd. # -# Change the options to suit your network # -# # -# Last updated on : 09/01/2006 # -# Written by : CC (cc@backchat.co.za) # -# Updated by : katsklaw (katsklaw@gmail.com) # -# Updated by : brain (brain@inspircd.org) # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT # -# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even # -# if you've configured InspIRCd before, these probably indicate # -# something new or different to this version and you SHOULD READ IT. # -# # -######################################################################## -# # -# Unalphabeticalise the modules list at your own risk # -# # -######################################################################## - - -#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- -# # -# Here is where you enter the information about your server. # -# # -# Syntax is as follows: # -# # -# <server name="server.name" # -# description="Server Description" # -# network="MyNetwork"> # -# # - -<server name="penguin.omega.org.za" - description="Waddle World" - network="Omega"> - - -#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Describes the Server Administrator's real name, nick # -# and email address. # -# # -# Syntax is as follows: # -# <admin name="real name" # -# nick="nick name" # -# email="email@address.com"> # -# # - -<admin name="Johnny English" - nick="MI5" - email="MI5@the.best.secret.agent"> - - -#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- -# # -# Enter the port and address bindings here. # -# # -# bind address - specifies which the address which ports bind # -# port - opens an unused port # -# type - can be 'clients' or 'servers'. The clients type is # -# a standard tcp based socket, the servers type is a # -# also a TCP based connection but of a different # -# format. # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# If you want to link servers to InspIRCd you must load the # -# m_spanningtree module! Please see the modules list below for # -# information on how to load this module! If you do not load this # -# module, server ports will NOT be bound! # -# # -# Leaving address empty binds to all available interfaces # -# # -# Syntax is as follows: # -# # -# <bind address="ip number" port="port" type="clients"> # -# <bind address="ip number" port="port" type="servers"> # -# # - -<bind address="" port="6660" type="clients"> -<bind address="" port="7000" type="servers"> -<bind address="" port="7001" type="servers"> - - -#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- -# # -# You can configure the passwords here which you wish to use for # -# the die and restart commands. Only trusted ircops who will # -# need this ability should know the die and restart password. # -# # -# Syntax is as follows: # -# <power diepass="die password" restartpass="restart password" # -# pause="secs before dying"> # -# # - -<power diepass="diepass" restartpass="restartpass" pause="2"> - - -#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This optional tag allows you to include another config file # -# allowing you to keep your configuration tidy. The configuration # -# file you include will be treated as part of the configuration file # -# which includes it, in simple terms the inclusion is transparent. # -# # -# All paths to config files are relative to the directory of the main # -# config file inspircd.conf, unless the filename starts with a forward# -# slash (/) in which case it is treated as an absolute path. # -# # -# Syntax is as follows: # -# <include file="file.conf"> # -# # - -#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# This is where you can configure which connections are allowed # -# and denied access onto your server. # -# The password is optional. # -# You may have as many of these as you require. # -# To allow/deny all connections use a * # -# # -# Syntax is as follows: # -# # -# <connect allow="ip mask"> # -# <connect allow="ip mask" password="blahblah"> # -# <connect allow="ip mask" password="blah" timeout="10"> # -# <connect allow="ip mask" timeout="blah" flood="5"> # -# <connect allow="ip mask" threshold="8" pingfreq="120"> # -# <connect allow="ip mask" sendq="99999" revcq="696969"> # -# <connect allow="ip mask" maxlocal="3" maxglobal="3"> # -# <connect deny="ip mask"> # -# # -# You may optionally include timeout="x" on any allow line, which # -# specifies the amount of time given before an unknown connection # -# is closed if USER/NICK/PASS are not given. This value is in secs # -# # -# You should also include a flood="x" line which indicates # -# the number of lines a user may place into their buffer at once # -# before they are disconnected for excess flood. This feature can # -# not be disabled, however it can be set to exremely high values, # -# rendering it effectively disabled. A recommended value is 10. # -# A counter is maintained for each user which is reset every # -# 'threshold' seconds and specifying this threshold value with # -# threshold="X" indicates how often the counter is reset. For # -# example, with flood="5" and threshold="8", the user may not send # -# more than 5 lines in 8 secs. # -# # -# You may optionally specify the sendq size and ping frequency of # -# each connect:allow line using the pingfreq="X" and sendq="X" # -# settings as shown in the full example below. # -# The ping frequency is specified in seconds, and the sendq size # -# in bytes. It is recommended, although not enforced, that you # -# should never set your sendq size to less than 8k. Send Queues are # -# dynamically allocated and can grow as needed up to the maximum # -# size specified. # -# # -# The optional recvq value is the maximum size which users in this # -# group may grow their receive queue to. This is recommended to be # -# kept pretty low compared to the sendq, as users will always # -# recieve more than they send in normal circumstances. The default # -# if not specified is 4096. # -# # -# IMPORTANT NOTE, CALL THE CONFUSION POLICE! # -# The sendq is the data waiting to be sent TO THE USER. # -# The recvq is the data being received FROM THE USER. # -# The names sendq and recvq are from the SERVER'S PERSPECTIVE not # -# that of the user... Just to clear up any confusion or complaints # -# that these are backwards :p # -# # -# The localmax and globalmax values can be used to enforce local # -# and global session limits on connections. The session limits are # -# counted against all users, but applied only to users within the # -# class. For example, if you had a class 'A' which has a session # -# limit of 3, and a class 'B' which has a session limit of 5, and # -# somehow, two users managed to get into class B which also match # -# class A, there is only one connection left for this IP now in A, # -# but if they can connect again to B, there are three. You get the # -# idea (i hope). # -# # - -<connect allow="196.12.*" password="secret"> -<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" localmax="3" globalmax="3"> - -<connect deny="69.254.*"> - - -#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- -# # -# Classes are a group of commands which are grouped together # -# and given a unique name. They used to define which commands # -# are available to certain types of Operators. # -# # -# Syntax is as follows: # -# # -# <class name="name" commands="oper commands"> # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# You are not forced to give these classes the names given below. # -# You can create your own named classes, if you want, in fact that # -# is the whole idea of this system! # -# # - -<class name="Shutdown" commands="DIE RESTART REHASH"> -<class name="ServerLink" commands="CONNECT SQUIT"> -<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE"> -<class name="OperChat" commands="WALLOPS GLOBOPS"> -<class name="HostCloak" commands="SETHOST SETIDENT SETNAME"> - - -#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# -# # -# This is where you specify which types of operators you have on # -# your server, as well as the commands they are allowed to use. # -# This works alongside with the classes specified above. # -# # -# type name - a name for the combined class types # -# # -# classes - specified above, used for flexibility for the # -# server admin to decide on which operators get # -# what commands # -# # -# host - optional hostmask operators will recieve on oper-up. # -# # -# Syntax is as follows: # -# # -# <type name="name" classes="class name" host="oper hostmask"> # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# You are not forced to give these types the names given below. # -# You can create your own named types, if you want, in fact that # -# is the whole idea of this system! # -# # - -<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za"> -<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za"> -<type name="Helper" classes="HostCloak" host="helper.omega.org.za"> - - -#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Opers are defined here. This is a very important section. # -# Remember to only make operators out of truthworthy people. # -# # -# name - oper name, best to use lower-case # -# # -# password - password to oper-up, # -# encryption not supported by inspircd. However, there # -# are modules that allow for oper password encryption. # -# # -# host - host of client allowed to oper-up. # -# wildcards accepted, seperate multiple hosts with space # -# # -# type - specified above, defines the kind of operator # -# # -# Syntax is as follows: # -# <oper name="login" # -# password="pass" # -# host="hostmask@of.oper" # -# type="oper type"> # -# # - -<oper name="katsklaw" - password="s3cret" - host="ident@dialup15.isp.com *@localhost *@server.com" - type="NetAdmin"> - - -#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# Defines which servers can link to this one, and which servers this # -# server may create outbound links to. # -# # -# name - The name is the canocial name of the server, does # -# not have to resolve - but it is expected to be sent # -# in the remote servers connection info. # -# ipaddr - Valid host or ip address for remote server. * # -# # -# port - The TCP port for the remote server. # -# # -# sendpass - Password to send to create an outbound connection # -# to this server. # -# # -# recvpass - Password to receive to accept an inbound connection # -# from this server. # -# # -# autoconnect - Sets the server to autoconnect. Where x is the num. # -# (optional) of seconds between attempts. e.g. 300 = 5 minutes. # -# # -# encryptionkey - Encryption key to be used for AES encryption, where # -# supported. Links using the spanning tree protocol # -# support AES. The encryption key must be EXACTLY 8, # -# 16 or 32 characters in length for a 64, 128 or 256 # -# bit key, respectively. # -# # -# hidden - When using m_spanningtree.so for linking. you may # -# set this to 'yes', and if you do, the IP address/ # -# hostname of this connection will NEVER be shown to # -# any opers on the network. In /STATS c its address # -# will show as *@<hidden>, and during CONNECT and # -# inbound connections, its IP will show as <hidden> # -# UNLESS the connection fails (e.g. due to a bad # -# password or servername) # -# # -# to u:line a server (give it extra privilages required for running # -# services, Q, etc) you must include the <uline server> tag as shown # -# in the example below. You can have as many of these as you like. # -# # -# WARNING: Unlike other ircds, u:lining a server allows ALL users on # -# that server to operoverride modes. This should only be used for # -# services and protected oper servers! # -# # -# IMPORTANT NOTE: When specifying the ip address and/or host, the # -# server software will prioritize RESOLVED hostnames above ip # -# addresses, so for example if your target server resolves to a.b.com # -# you MUST put a.b.com into your link block, and NOT the IP address # -# of a.b.com. The system uses reverse resolution. # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# If you want to link servers to InspIRCd you must load the # -# m_spanningtree module! Please see the modules list below for # -# information on how to load this module! If you do not load this # -# module, server links will NOT work! # -# # - -<link name="hub.penguin.org" - ipaddr="penguin.box.com" - port="7000" - autoconnect="300" - sendpass="outgoing!password" - recvpass="incoming!password"> - -<link name="services.antarctic.com" - ipaddr="localhost" - port="7000" - sendpass="penguins" - recvpass="polarbears"> - -<uline server="services.antarctic.com"> - - -#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# These options let you define the path to your motd and rules # -# files. # -# # - -<files motd="/home/cc/inspircd/conf/inspircd.motd" - rules="/home/cc/inspircd/conf/inspircd.rules"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Define your DNS server address here. InspIRCd has its own resolver # -# and you must define this otherwise nobody's host will resolve. The # -# timeout value is in seconds. # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# When choosing a server, be sure to choose one which will do a # -# RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these # -# recursive lookups itself, to save time and resources. The dns # -# server recommended by the InspIRCd team is bind, available from the # -# ISC website. If your DNS server does not do a recursive lookup, you # -# will be able to notice this by the fact that none of your users are # -# resolving even though the DNS server appears to be up! Most ISP and # -# hosting provider DNS servers support recursive lookups. # -# # - -<dns server="127.0.0.1" timeout="5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Define the path to the PID file here. The PID file can be used to # -# rehash the ircd from the shell or to terminate the ircd from the # -# shell using shell scripts, perl scripts etc, and to monitor the # -# ircd's state via cron jobs. # -# # - -<pid file="/path/to/inspircd.pid"> - -#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Use these tags to customise the ban limits on a per channel basis. # -# the tags are read from top to bottom, and any tag found which # -# matches the channels name applies the banlimit to that channel. # -# It is advisable to put an entry with the channel as '*' at the # -# bottom of the list. If none are specified or no maxbans tag is # -# matched, the banlist size defaults to 64 entries. # -# # - -<banlist chan="#morons" limit="128"> -<banlist chan="*" limit="69"> - -#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This tag is optional, and specifies one or more commands which are # -# not available to non-operators. For example you may wish to disable # -# NICK and prevent non-opers from changing their nicknames. # -# Note that any disabled commands take effect only after the user has # -# 'registered' (e.g. after the initial USER/NICK/PASS on connection) # -# so for example disabling NICK will not cripple your network. # -# # -# <disabled commands="TOPIC MODE"> # -# # - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Just remove this... Its here to make you read ALL of the config # -# file options ;) # - -<die value="You should probably edit your config *PROPERLY* and try again."> - - - -#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Settings to define which features are useable on your server. # -# # -# prefixquit - a prefix for a client's quit message # -# # -# loglevel - specifies what detail of messages to log in the # -# log file. You may select from debug, verbose, # -# default, sparse and none. # -# allowhalfop - allows the +h channel mode # -# # -# noservices - If noservices is true, yes, or 1, then the first # -# user into a channel gets founder status. This is # -# only useful on networks running the m_chanprotect # -# module without services. # -# # -# netbuffersize - size of the buffer used to receive data from # -# clients. The ircd may only read() this amount # -# of text in one go at any time. (OPTIONAL) # -# # -# maxwho - The maximum number of results returned by a /WHO # -# query. This is to prevent /WHO being used as a # -# spam vector or means of flooding an ircd. The # -# default is 128, it is not recommended to raise it # -# above 1024. Values up to 65535 are permitted. # -# # -# somaxconn - The maximum number of sockets that may be waiting # -# in the accept queue. This usually allows the ircd # -# to soak up more connections in a shorter space of # -# time when increased but please be aware there is a # -# system defined maximum value to this, the same way # -# there is a system defined maximum number of file # -# descriptors. Some systems may only allow this to # -# be up to 5 (ugh) while others such as FreeBSD will # -# default to a much nicer 128. # -# # -# moduledir - This optional value indicates a runtime change of # -# the location where modules are to be found. This # -# does not add a supplementary directory. There can # -# only be one module path. # -# # -# softlimit - This optional feature allows a defined softlimit. # -# if defined sets a soft maxconnections value, has # -# to be less than the ./configure maxclients # -# # -# operonlystats - The operonlystats field is optional and specifies # -# which stats characters in /STATS may only be # -# requested by an IRC operator. Stats characters in # -# this field are case sensitive and enforced as # -# oper-only independent of if they are in a module # -# or the core. # -# # -# customversion - If you specify this configuration item, and it is # -# not set to an empty value, then when a user does # -# a /VERSION command on the ircd, this string will # -# be displayed as the second portion of the output, # -# replacing the system 'uname', compile flags and # -# socket engine/dns engine names. You may use this # -# to enhance security, or simply for vanity. # -# # -# maxtargets - The maxtargets field is optional, and if not # -# defined, defaults to 20. It indicates the maximum # -# number of targets which may be given to commands # -# such as PRIVMSG, KICK etc. # -# # -# hidesplits - When set to 'yes', will hide split server names # -# from non-opers. Non-opers will see '*.net *.split' # -# instead of the server names in the quit message, # -# identical to the way IRCu displays them. # -# # -# hidewhois - When defined with a non-empty value, the given # -# text will be used in place of the user's server # -# in WHOIS, when a user is WHOISed by a non-oper. # -# For example, most nets will want to set this to # -# something like '*.netname.net' to conceal the # -# actual server the user is on. # -# # -# flatlinks - When you are using m_spanningtree.so, and this # -# value is set to true, yes or 1, /MAP and /LINKS # -# will be flattened when shown to a non-oper. # -# # -# hideulines - When you are using m_spanningtree.so, and this # -# value is set to true, yes or 1, then U-lined # -# servers will be hidden in /LINKS and /MAP. For non # -# opers. Please be aware that this will also hide # -# any leaf servers of a U-lined server, e.g. jupes. # -# # -# tempdir - If defined, indicates a path where modules will be # -# temporarily copied before loading. If not defined, # -# defaults to /tmp. # -# # - -<options prefixquit="Quit: " - loglevel="default" - netbuffersize="10240" - maxwho="128" - noservices="0" - somaxconn="128" - softlimit="128" - operonlystats="oclgkz" - customversion="" - maxtargets="20" - hidesplits="no" - hidewhois="" - flatlinks="no" - hideulines="no" - allowhalfop="yes"> - - - -#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# These tags define which modules will be loaded on startup by your # -# server. Add modules without any paths. When you make your ircd # -# using the 'make' command, all compiled modules will be moved into # -# the folder you specified when you ran ./configure. The module tag # -# automatically looks for modules in this location. # -# If you attempt to load a module outside of this location, either # -# in the config, or via /LOADMODULE, you will receive an error. # -# # -# By default, ALL modules are commented out. You must uncomment them # -# or add lines to your config to load modules. Please refer to # -# http://www.inspircd.org/wiki/Modules_List for a list of modules and# -# each modules link for any additional conf tags they require. # -# # -# WINDOWS USERS PLEASE NOTE: You can still load these modules! They # -# are incorporated into the executable and can be loaded and removed # -# similarly to if they were in a ramdisk. # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# To link servers to InspIRCd, you MUST load the m_spanningtree # -# module, as shown below. If you DO NOT do this, server links will # -# NOT work at all. ie. The ports will NOT bind, and /connect will not # -# work properly. This is by design, to allow for the implementation # -# of other linking protocols in modules in the future. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Spanning Tree module - allows linking of servers using the spanning -# tree protocol (see the READ THIS BIT section above). -# -#<module name="m_spanningtree.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alias module: Allows you to define server-side command aliases -#<module name="m_alias.so"> -# -#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_alias.so module loaded, you may also define # -# aliases as shown below. They are commonly used to provide shortcut # -# commands to services, however they are not limited to jsut this use.# -# An alias tag requires the following values to be defined in it: # -# # -# text - The text to detect at the start of the line, # -# must be at the start of the line to trigger the # -# alias. May contain spaces, but case insensitive. # -# replace - The text to replace 'text' with. Usually this # -# will be "PRIVMSG ServiceName" or similar. # -# requires - If you provide a value for 'requires' this means # -# the given nickname MUST be online for the alias # -# to successfully trigger. If they are not, then # -# the user receives a 'no such nick' 401 numeric. # -# uline - Defining this value with 'yes', 'true' or '1' # -# will ensure that the user given in 'requires' # -# must also be on a u-lined server, as well as # -# actually being on the network. If the user is # -# online, but not on a u-lined server, then an # -# oper-alert is sent out as this is possibly signs # -# of a user trying to impersonate a service. # -# # -#<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes"> -#<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes"> -#<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes"> -#<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibottler module: Labels bottler leech bots -#<module name="m_antibottler.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban except module: Adds support for channel ban exceptions (+e) -#<module name="m_banexception.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block amsg module: Attempt to block all usage of /amsg and /ame -#<module name="m_blockamsg.so"> -# -#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_blockamsg.so module loaded, you can configure it # -# with the <blockamsg> tag: # -# # -# delay - How many seconds between two messages to force # -# them to be recognised as unrelated. # -# action - Any of 'notice', 'noticeopers', 'silent', 'kill' # -# or 'killopers'. Define how to take action when # -# a user uses /amsg or /ame. # -# -#<blockamsg delay="3" action="killopers"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block colour module: Blocking colour-coded messages with cmode +c -#<module name="m_blockcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Botmode module: Adds the user mode +B -#<module name="m_botmode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CBAN module: Lets you disallow channels from being used at runtime. -#<module name="m_cban.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Censor module: Adds the channel mode +G -#<module name="m_censor.so"> -# -#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_censor module, then specfiy # -# below the path to the censor.conf file. See also: # -# Censor file, see http://www.inspircd.org/wiki/Censor_Module # -# -#<censor file="/path/to/censor.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel filter module: Allows channel-op defined message -# filtering using simple string matches (channel mode +g) -#<module name="m_chanfilter.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Chanprotect module: gives +q and +a channel modes -#<module name="m_chanprotect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGHOST module: Adds the /CHGHOST command -#<module name="m_chghost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGIDENT module: Adds the /CHGIDENT command -#<module name="m_chgident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Cloaking module: Adds usermode +x and cloaking support -#<module name="m_cloaking.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Lusers: Shows the LUSERS output on connect -#<module name="m_conn_lusers.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Wait-for-Pong: Don't let a user connect until they PONG -#<module name="m_conn_waitpong.so"> -# -#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_conn_waitpong.so module loaded, configure it with # -# the <waitpong> tag: # -# # -# sendsnotice - Whether to send a snotice on connect, like Unreal# -# killonbadreply - Whether to kill the user if they send the wrong # -# PONG reply. # -# -#<waitpong sendsnotice="yes" killonbadreply="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deny Channels: Deny Channels from being used by users -#<module name="m_denychans.so"> -# -#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_denychans.so module loaded, you need to specify # -# the channels to deny: -# # -# name - The channel name to deny. # -# allowopers - If operators are allowed to override the deny. # -# reason - Reason given for the deny. # -# -#<badchan name="#gods" allowopers="yes" reason="Tortoises!"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Devoice Module: Let users devoice themselves. -#<module name="m_devoice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Filter module: Provides glob-based message filtering -#<module name="m_filter.so"> -#OR -# PCRE filter module: Filters messages using regular expressions -#<module name="m_filter_pcre.so"> -# -#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_filter or m_filter_pcre # -# modules, then specfiy below the path to the filter.conf file. # -# -#<filter file="/path/to/inspircd/filter.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Foobar module - does nothing - historical relic -#<module name="m_foobar.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Globops module: gives /GLOBOPS and usermode +g -#<module name="m_globops.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Global load module: Allows loading and unloading of modules network- -# wide (USE WITH EXTREME CAUTION!) -#<module name="m_globalload.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HELPOP module: Provides the /HELPOP command -#<module name="m_helpop.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_helpop.so module, then # -# specify below the path to the helpop.conf file. # -# -#<helpop file="/path/to/inspircd/helpop.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Hostchange module: Allows a different style of cloaking -#<module name="m_hostchange.so"> -# -#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you choose to use the m_hostchange.so module. # -# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # -# -#<host suffix="polarbears.org"> -#<hostchange mask="*@fbi.gov" action="addnick"> -#<hostchange mask="*r00t@*" action="suffix"> -#<hostchange mask="a@b.com" action="set" value="blah.blah.blah"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ident: Provides RFC 1413 ident lookup support -#<module name="m_ident.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you are using the m_ident.so module, then you can # -# specify the timeout for ident lookups here. If not defined, it will # -# default to one second. This is a non-blocking timeout which holds # -# the user in a 'connecting' state until the lookup is complete. # -# -#<ident timeout="5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Invite except module: Adds support for channel invite exceptions (+I) -#<module name="m_inviteexception.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Join flood module: Adds support for join flood protection (+j) -#<module name="m_joinflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) -#<module name="m_kicknorejoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Knock module: adds the /KNOCK command and +K channel mode -#<module name="m_knock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Msg flood module: Adds message/notice flood protection (+f) -#<module name="m_messageflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nicklock module: Let opers change a user's nick and then stop that -# user from changing their nick again. /NICKLOCK and /NICKUNLOCK -#<module name="m_nicklock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No ctcp module: Adds the channel mode +C to block CTCPs -#<module name="m_noctcp.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Noinvite module: Gives channel mode +V -#<module name="m_noinvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No kicks module: Adds the +Q channel mode -#<module name="m_nokicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No nicks module: Adds the +N channel mode -#<module name="m_nonicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No Notice module: adds the channel mode +T -#<module name="m_nonotice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper channels mode: Adds the +O channel mode -#<module name="m_operchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper Join module: Forces opers to join a channel on oper-up -#<module name="m_operjoin.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you are using the m_operjoin.so module, specify the channel here # -# -#<operjoin channel="#channel"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MOTD module: Provides support for seperate message of the day -# on oper-up -#<module name="m_opermotd.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you are using the m_opermotd.so module, specify the motd here # -# -#<opermotd file="/path/to/oper.motd"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Override module: Adds support for oper override -#<module name="m_override.so"> -# -#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# m_override.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/Oper_Override_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper levels module: Gives each oper a level and prevents -# actions being taken against higher level opers -# Specify the level as the 'level' parameter of the <type> tag -#<module name="m_operlevels.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MD5 module: Allows MD5 hashed oper passwords -#<module name="m_opermd5.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper SHA256 module: Allows SHA256 hashed oper passwords -# This module is in src/modules/extra -#<module name="m_opersha256.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper modes module: Allows you to specify modes to add/remove on oper -# Specify the modes as the 'modes' parameter of the <type> tag -#<module name="m_opermodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Parking module: Adds parking support and /PARK and /UNPARK -#<module name="m_park.so"> -# -#-#-#-#-#-#-#-#-#-#-#-# PARK CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_park.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/User_Parking_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Random Quote module: provides a random quote on connect -#<module name="m_randquote.so"> -# -#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_randquote.so module, then # -# specify below the path to the randquotes.conf file. # -# -#<randquote file="/path/to/inspircd/randquotes.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Redirect module: Adds channel redirection (mode +L) -#<module name="m_redirect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Remove module: Adds the /REMOVE command which is a peaceful -# alternative to /KICK -#<module name="m_remove.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels -#<module name="m_restrictchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict message module: Allows users to only message opers -#<module name="m_restrictmsg.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAJOIN module: Adds the /SAJOIN command -#<module name="m_sajoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAMODE module: Adds the oper /SAMODE command -#<module name="m_samode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SANICK module: Allows opers to change user's nicks -#<module name="m_sanick.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAPART module: Adds the oper /SAPART command -#<module name="m_sapart.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) -#<module name="m_saquit.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Set Idle module: Adds a command for opers to change their -# idle time (mainly a toy) -#<module name="m_setidle.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -#<module name="m_services.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Sethost module: Adds the /SETHOST command -#<module name="m_sethost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Setident module: Adds the /SETIDENT command -#<module name="m_setident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SETNAME module: Adds the /SETNAME command -#<module name="m_setname.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Show Whois module: Adds the +W usermode which allows opers -# to see when they are whois'ed -#<module name="m_showwhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Spy module: Adds the commands SPYLIST and SPYNAMES that let opers -# see who is in a +s channel, and list +s channels, show keys of keyed -# channels the oper is not a member of etc. (standard 'abusive' features -# of unrealircd, modulized here in InspIRCd). -#<module name="m_spy.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL channel mode module: Adds support for SSL-only channels (+z). -# does not do anything useful without a working SSL module (see below) -#<module name="m_sslmodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, -# if enabled. You must copy the source for this module from the directory -# src/modules/extra, or answer 'yes' in ./configure when asked if you -# want to enable this, or it will not load. -#<module name="m_ssl_gnutls.so"> -# -#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_ssl_gnutls.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/GnuTLS_SSL_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL, -# if enabled. You must copy the source for this module from the directory -# src/modules/extra, or answer 'yes' in ./configure when asked if you -# want to enable this, or it will not load. -#<module name="m_ssl_openssl.so"> -# -#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_ssl_openssl.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/OpenSSL_SSL_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Strip colour module: Adds the channel mode +S -#<module name="m_stripcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SILENCE module: Adds support for /SILENCE -#<module name="m_silence.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL module: Allows other SQL modules to access SQL databases -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra -#<module name="m_sql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_sql.so is more complex than described here, see the wiki for more:# -# http://www.inspircd.org/wiki/SQL_Service_Provider_Module # -# -#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL authentication module: Allows IRCd connections to be tied into -# a database table (for example a forum). You must copy the source for -# this module from the directory src/modules/extra -#<module name="m_sqlauth.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_sqlauth.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/SQL_Authentication_Module # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL logging module: Allows you to log network-wide data for your -# network in a fully normalized set of SQL tables. You must copy the -# source for this module from the directory src/modules/extra -#<module name="m_sqllog.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# dbid - Database ID to use (see m_sql) # -# # -# See also: http://www.inspircd.org/wiki/SQL_Logging_Module # -# # -#<sqllog dbid="1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL oper module: Allows you to store oper credentials in an SQL table -# You must copy the source for this module from the directory src/modules/extra -#<module name="m_sqloper.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# dbid - Database ID to use (see m_sql) # -# # -# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module # -# # -#<sqloper dbid="1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SWHOIS module: Allows you to add arbitary lines to user WHOIS. -#<module name="m_swhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test command module: Does nothing significant. Read: pointless. -#<module name="m_testcommand.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Timed bans module: Adds timed bans and the /TBAN command -#<module name="m_timedbans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Uninvite module: Adds the /UNINVITE command which lets users remove -# pending invites from channels without waiting for the user to join. -#<module name="m_uninvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Userip module: Adds the /USERIP command -#<module name="m_userip.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Vhost module: Adds the VHOST command which allows for adding virtual -# hosts which are accessible using a username and password in the config. -#<module name="m_vhost.so"> -# -#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# user - Username for the vhost. # -# # -# pass - Password for the vhost. # -# # -# host - Vhost to set. # -# -#<vhost user="some_username" pass="some_password" host="some.host"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Watch module: Adds the WATCH command, which is used by clients to -# maintain notify lists. -#<module name="m_watch.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# The ban tags define nick masks, host masks and ip ranges which are # -# banned from your server. All details in these tags are local to # -# Your server. # -# # -# # -# badip lines ban an ip range (same as a zline) # -# # -# ipmask - The ip range to ban (wildcards possible) # -# reason - Reason to display when disconnected # -# # -# badnick lines ban a nick mask (same as a qline) # -# # -# nick - Nick mask to ban (wildcards possible) # -# reason - Reason to display on /NICK # -# # -# badhost lines ban a user@host mask (same as a kline) # -# # -# host - ident@hostname (wildcards possible) # -# reason - Reason to display on disconnection # -# # -# exception lines define a hostmask that is excempt from [kzg]lines # -# # -# host - ident@hostname (wildcards possible) # -# reason - Reason, shown only in /stats e # -# # - -<badip ipmask="69.69.69.69" reason="No porn here thanks."> - -<badnick nick="ChanServ" reason="Reserved For Services"> -<badnick nick="NickServ" reason="Reserved For Services"> -<badnick nick="OperServ" reason="Reserved For Services"> -<badnick nick="MemoServ" reason="Reserved For Services"> - -<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots"> -<badhost host="*@localhost" reason="No irc from localhost!"> - -<exception host="*@ircop.host.com" reason="Opers hostname"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# You should already know what to do here :) # - -<die value="You should probably edit your config *PROPERLY* and try again."> - - -######################################################################### -# # -# - InspIRCd Development Team - # -# http://www.inspircd.org # -# # -######################################################################### |