Remove the preconfigured Charybdis and UnrealIRCd module files.

These are extremely outdated. If we want to ship these then they
should be redone from scratch.

4 files changed, 0 insertions, 708 deletions

diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf.example
index 61d1a8c12..035f82a12 100644
--- a/docs/conf/inspircd.conf.example
+++ b/docs/conf/inspircd.conf.example
@@ -969,21 +969,6 @@
 # The default does nothing -- we include it for simplicity for you.   #
 <include file="examples/modules.conf.example">
 
-# Here are some pre-built modules.conf files that closely match the
-# default configurations of some popular IRCd's. You still may want to
-# look over them and make sure if everything is correct for you and setup
-# the proper SSL information.
-#
-# *NOTE*: These files have no comments for what the modules do. If you
-# are interested in that, please read the modules.conf.example. It is also
-# recommended that you make your own modules file based on modules.conf.example.
-
-# Settings similar to UnrealIRCd defaults.
-#<include file="examples/modules/unrealircd.conf.example">
-
-# Settings similar to Charybdis IRCd defaults.
-#<include file="examples/modules/charybdis.conf.example">
-
 #-#-#-#-#-#-#-#-#-#-#-# SERVICES CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # If you use services you will probably want to include one of the    #
diff --git a/docs/conf/modules/charybdis.conf.example b/docs/conf/modules/charybdis.conf.example
deleted file mode 100644
index 97436c548..000000000
--- a/docs/conf/modules/charybdis.conf.example
+++ /dev/null
@@ -1,302 +0,0 @@
-<module name="md5">
-<module name="sha256">
-<module name="alias">
-<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2" requires="NickServ" uline="yes">
-
-<module name="banexception">
-<module name="banredirect">
-<module name="blockcolor">
-<module name="callerid">
-<callerid maxaccepts="16"
-          operoverride="no"
-          tracknick="no"
-          cooldown="60">
-
-<module name="cap">
-<module name="cban">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="cgiirc">
-#
-#-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: https://wiki.inspircd.org/Modules/3.0/cgiirc
-#
-# Set to yes if you want to notice opers when CGI clients connect
-# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.mysite.com">       # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.mysite.com">  # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-#   mask="somebox.mysite.com">                      # Get IP from WEBIRC
-#
-# IMPORTANT NOTE:
-# ---------------
-#
-# When you connect CGI:IRC clients, there are two connect classes which
-# apply to these clients. When the client initially connects, the connect
-# class which matches the cgi:irc site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
-# real IP is then checked. You may set this class to a lower value, so that
-# the real IP of the client can still be restricted to, for example, 3
-# sessions maximum.
-#
-
-<module name="chancreate">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel names module: Allows disabling channels which have certain
-# characters in the channel name such as bold, colorcodes, etc. which
-# can be quite annoying and allow users to on occasion have a channel
-# that looks like the name of another channel on the network.
-<module name="channames">
-
-<channames
-	# denyrange: characters or range of characters to deny in channel
-	# names.
-	denyrange="2"
-
-	# allowrange: characters or range of characters to specifically allow
-	# in channel names.
-	allowrange="">
-
-<module name="channelban">
-<module name="chghost">
-<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
-<module name="chgident">
-<module name="chgname">
-<module name="cloaking">
-#
-#-#-#-#-#-#-#-#-#-#-#- CLOAKING  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you specify the cloaking module as above, you must define        #
-# cloak keys, and optionally a cloak prefix as shown below. The cloak #
-# keys must be shared across the network for correct cloaking.        #
-#                                                                     #
-# There are four methods of cloaking:                                 #
-#                                                                     #
-#   half           Cloak only the "unique" portion of a host; show    #
-#                  the last 2 parts of the domain, /16 subnet of IPv4 #
-#                  or /48 subnet of the IPv6 address.                 #
-#                                                                     #
-#   full           Cloak the users completely, using three slices for #
-#                  common CIDR bans (IPv4: /16, /24; IPv6: /48, /64)  #
-#                                                                     #
-# These methods use a single key that can be any length of text.      #
-# An optional prefix may be specified to mark cloaked hosts.          #
-#                                                                     #
-# The following methods are maintained for backwards compatibility;   #
-# they are slightly less secure, and always hide unresolved IPs       #
-#                                                                     #
-#   compat-host    InspIRCd 1.2-compatible host-based cloaking        #
-#   compat-ip      InspIRCd 1.2-compatible ip-always cloaking         #
-#                                                                     #
-# You must specify key1, key2, key3, key4 for the compat cloaking     #
-# modes; the values must be less than 0x80000000 and should be picked #
-# at random. Prefix is mandatory, will default to network name if not #
-# specified, and will always have a "-" appended.                     #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-<cloak mode="half"
-       key="secret"
-       prefix="net-">
-
-<module name="close">
-<module name="conn_umodes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connectban: Provides IP connection throttling. Any IP range that connects
-# too many times (configurable) in an hour is zlined for a (configurable)
-# duration, and their count resets to 0.
-#
-# ipv4cidr and ipv6cidr allow you to turn the comparison from individual
-# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
-# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
-#
-#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
-# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
-#
-#<module name="connectban">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection throttle module.
-#<module name="connflood">
-#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#  seconds, maxconns -  Amount of connections per <seconds>.
-#
-#  timeout           -  Time to wait after the throttle was activated
-#                       before deactivating it. Be aware that the time
-#                       is seconds + timeout.
-#
-#  quitmsg           -  The message that users get if they attempt to
-#                       connect while the throttle is active.
-#
-#  bootwait          -  Amount of time to wait before enforcing the
-#                       throttling when the server just booted.
-#
-#<connflood seconds="30" maxconns="3" timeout="30"
-#   quitmsg="Throttled" bootwait="10">
-
-<module name="deaf">
-<module name="dnsbl">
-<module name="gecosban">
-<module name="globalload">
-<module name="ident">
-<ident timeout="1">
-<module name="inviteexception">
-<module name="joinflood">
-<module name="knock">
-<module name="namesx">
-<module name="operchans">
-<module name="operlog">
-<module name="opermodes">
-<module name="password_hash">
-<module name="permchannels">
-<module name="muteban">
-<module name="redirect">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for glob or wildcard (?/*) matching.
-# You must have at least 1 provider loaded to use the filter or the
-# rline modules. This module has no additional requirements, as it uses
-# the matching already present in InspIRCd core.
-#<module name="regex_glob">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for PCRE (Perl-Compatible Regular
-# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use the filter or
-# the rline module.
-#<module name="regex_pcre">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for POSIX regular expressions.
-# You shouldn't need any additional libraries on a POSIX-compatible
-# system (ie: any Linux, BSD, but not Windows). You must have at least
-# 1 provider loaded to use the filter or the rline module.
-# On POSIX-compliant systems, regex syntax can be found by using the
-# command: 'man 7 regex'.
-#<module name="regex_posix">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation
-# Allows only registered users and opers to create new channels.
-#
-# You probably *DO NOT* want to load this module on a public network.
-#
-#<module name="regonlycreate">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban users through regular expression patterns
-#<module name="rline">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# If you wish to re-check a user when they change nickname (can be
-# useful under some situations, but *can* also use CPU with more users
-# on a server) then set the following configuration value:
-# Also, this is where you set what Regular Expression engine is to be
-# used. If you ever change it while running, all of your R-Lines will be
-# wiped. This is the regex engine used by all R-Lines set, and
-# regex_<engine> must be loaded, or rline will be nonfunctional
-# until you load it or change the engine to one that is loaded.
-#
-#<rline matchonnickchange="yes" engine="pcre">
-#
-# Generally, you will NOT want to use 'glob' here, as this turns
-# rline into just another gline. The exceptions are that rline will
-# always use the full nick!user@host realname string, rather than only
-# user@host, but beware that only the ? and * wildcards are available,
-# and are the only way to specify where the space can occur if you do
-# use glob. For this reason, is recommended to use a real regex engine
-# so that at least \s or [[:space:]] is available.
-
-<module name="sasl">
-<module name="servprotect">
-<module name="services_account">
-<module name="sethost">
-<module name="serverban">
-<module name="showwhois">
-<showwhois opersonly="yes" showfromopers="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels via
-# channel mode +z and the 'z' extban which matches SSL client
-# certificate fingerprints.
-# Does not do anything useful without a working SSL module (see below).
-#<module name="sslmodes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
-# if enabled. You must answer 'yes' in ./configure when asked or
-# manually symlink the source for this module from the directory
-# src/modules/extra, if you want to enable this, or it will not load.
-#<module name="ssl_gnutls">
-#
-#-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# ssl_gnutls is too complex to describe here, see the wiki:           #
-# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls                    #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Info module: Allows users to retrieve information about other
-# user's peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of ssl_gnutls
-# or ssl_openssl must be loaded. This module also adds the
-# "* <user> is using a secure connection" whois line, the ability for
-# opers to use SSL cert fingerprints to verify their identity and the
-# ability to force opers to use SSL connections in order to oper up.
-# It is highly recommended to load this module especially if
-# you use SSL on your network.
-# For how to use the oper features, please see the first example <oper> tag
-# in opers.conf.example.
-#
-#<module name="sslinfo">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
-# if enabled. You must answer 'yes' in ./configure when asked or symlink
-# the source for this module from the directory src/modules/extra, if
-# you want to enable this, or it will not load.
-#<module name="ssl_openssl">
-#
-#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# ssl_openssl is too complex to describe here, see the wiki:          #
-# https://wiki.inspircd.org/Modules/3.0/ssl_openssl                   #
-
-<module name="stripcolor">
-<module name="svshold">
-<module name="tline">
-<module name="uhnames">
-<module name="watch">
-<watch maxentries="32">
-<module name="xline_db">
-
-<module name="spanningtree">
diff --git a/docs/conf/modules/unrealircd.conf.example b/docs/conf/modules/unrealircd.conf.example
deleted file mode 100644
index 8ebdd2c1f..000000000
--- a/docs/conf/modules/unrealircd.conf.example
+++ /dev/null
@@ -1,389 +0,0 @@
-<module name="md5">
-<module name="sha256">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Alias module: Allows you to define server-side command aliases.
-<module name="alias">
-<fantasy prefix="!" allowbots="no">
-# Aliases
-<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-#
-# An example of using the format value to create an alias with two
-# different behaviours depending on the format of the parameters.
-#
-#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
-#  requires="ChanServ" uline="yes">
-#
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
-#  requires="NickServ" uline="yes">
-#
-# This alias fixes a glitch in xchat 2.6.x and above and the way it
-# assumes IDENTIFY must be prefixed by a colon (:) character. It should
-# be placed ABOVE the default NICKSERV alias (the first example) listed
-# above.
-#
-#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
-#  requires="NickServ" uline="yes">
-
-<module name="allowinvite">
-<module name="alltime">
-<module name="auditorium">
-<auditorium showops="yes" operoverride="yes">
-<module name="banexception">
-<module name="blockcaps">
-<blockcaps percent="50"
-           minlen="5"
-           capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
-<module name="blockcolor">
-<module name="botmode">
-<module name="censor">
-<include file="inspircd.censor.example">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="cgiirc">
-#
-#-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: https://wiki.inspircd.org/Modules/3.0/cgiirc
-#
-# Set to yes if you want to notice opers when CGI clients connect
-# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.mysite.com">       # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.mysite.com">  # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-#   mask="somebox.mysite.com">                      # Get IP from WEBIRC
-#
-# IMPORTANT NOTE:
-# ---------------
-#
-# When you connect CGI:IRC clients, there are two connect classes which
-# apply to these clients. When the client initially connects, the connect
-# class which matches the cgi:irc site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
-# real IP is then checked. You may set this class to a lower value, so that
-# the real IP of the client can still be restricted to, for example, 3
-# sessions maximum.
-#
-
-<module name="chanfilter">
-<chanfilter hidemask="yes">
-
-<module name="check">
-<module name="chghost">
-<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
-
-<module name="chgident">
-<module name="chgname">
-<module name="cloaking">
-<cloak mode="half"
-       key="secret"
-       prefix="net-">
-
-<module name="close">
-<module name="clones">
-<module name="commonchans">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Auto join on connect module: Allows you to force users to join one
-# or more channels automatically upon connecting to the server.
-#<module name="conn_join">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
-#
-# If you have the conn_join module loaded, you can configure it below:
-#
-#<autojoin channel="#one,#two,#three">
-
-<module name="conn_umodes">
-<module name="cycle">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection throttle module.
-#<module name="connflood">
-#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#  seconds, maxconns -  Amount of connections per <seconds>.
-#
-#  timeout           -  Time to wait after the throttle was activated
-#                       before deactivating it. Be aware that the time
-#                       is seconds + timeout.
-#
-#  quitmsg           -  The message that users get if they attempt to
-#                       connect while the throttle is active.
-#
-#  bootwait          -  Amount of time to wait before enforcing the
-#                       throttling when the server just booted.
-#
-#<connflood seconds="30" maxconns="3" timeout="30"
-#   quitmsg="Throttled" bootwait="10">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DCCALLOW module: Adds the /DCCALLOW command.
-<module name="dccallow">
-#
-#-#-#-#-#-#-#-#-#-#-#-  DCCALLOW CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#  blockchat         - Whether to block DCC CHAT as well as DCC SEND
-#  length            - Default duration of entries in DCCALLOW list
-#  action            - Default action to take if no action is specified
-#                      can be 'block' or 'allow'
-#
-# File configuration:
-#  pattern           - The glob pattern to match against
-#  action            - Action to take if a user attempts to send a file
-#                      that matches this pattern, can be 'block' or 'allow'
-#
-#<dccallow blockchat="yes" length="5m" action="block">
-#<banfile pattern="*.exe" action="block">
-#<banfile pattern="*.txt" action="allow">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-
-<module name="deaf">
-<module name="denychans"> 
-#<badchan name="#gods*" allowopers="yes" reason="Tortoises!">         #
-#<badchan name="#heaven" redirect="#hell" reason="Nice try!">         #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Filter module: Provides message filtering, similar to SPAMFILTER.
-<module name="filter">
-#                                                                     #
-# This module depends upon a regex provider such as regex_pcre or     #
-# regex_glob to function. You must specify which of these you want    #
-# the filter module to use via the tag below.                         #
-#                                                                     #
-# Valid engines are:                                                  #
-#                                                                     #
-# glob   - Glob patterns, provided via regex_glob.                    #
-# pcre   - PCRE regexps, provided via regex_pcre, needs libpcre.      #
-# tre    - TRE regexps, provided via regex_tre, requires libtre.      #
-# posix  - POSIX regexps, provided via regex_posix, not available     #
-#          on Windows, no dependencies on other operating systems.    #
-# stdlib - stdlib regexps, provided via regex_stdlib, see comment     #
-#          at the <module> tag for info on availability.              #
-#                                                                     #
-<filteropts engine="glob">
-#                                                                     #
-# Your choice of regex engine must match on all servers network-wide.
-#
-# To learn more about the configuration of this module, read          #
-# examples/filter.conf.example, which covers the various types of     #
-# filters and shows how to add exemptions.                            #
-#
-#-#-#-#-#-#-#-#-#-#-#-  FILTER  CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# Optional - If you specify to use the filter module, then            #
-# specfiy below the path to the filter.conf file, or define some      #
-# <filter> tags.                                                      #
-#                                                                     #
-#<include file="filter.conf">
-
-<module name="gecosban">
-<module name="globops">
-<module name="globalload">
-<module name="halfop">
-<module name="helpop">
-<include file="inspircd.helpop-full.example">
-
-<module name="hidechans">
-<hidechans affectsopers="false">
-
-<module name="hideoper">
-<module name="ident">
-<ident timeout="1">
-<module name="inviteexception">
-<module name="joinflood">
-<module name="jumpserver">
-<module name="knock">
-<module name="messageflood">
-<module name="namesx">
-<module name="nickflood">
-<module name="noctcp">
-<module name="nokicks">
-<module name="nonicks">
-<module name="nopartmsg">
-<module name="nonotice">
-<module name="operchans">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper join module: Auto-joins opers to a channel upon oper-up.
-# This module is oper-only. For the user equivalent, see the conn_join
-# module.
-<module name="operjoin">
-#
-#-#-#-#-#-#-#-#-#-#-#   OPERJOIN CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you are using the operjoin module, specify options here:         #
-#                                                                     #
-# channel     -      The channel name to join, can also be a comma    #
-#                    separated list eg. "#channel1,#channel2".        #
-#                                                                     #
-# override    -      Lets the oper join walking thru any modes that   #
-#                    might be set, even bans. Use "yes" or "no".      #
-#                                                                     #
-#<operjoin channel="#channel" override="no">
-#
-# Alternatively you can use the autojoin="channellist" in a <type>    #
-# tag to set specific autojoins for a type of oper, for example:      #
-#
-#<type name="Helper" autojoin="#help" classes="...">
-
-<module name="operlog">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for separate message of the day
-# on oper-up.
-# This module is oper-only.
-#<module name="opermotd">
-#
-#-#-#-#-#-#-#-#-#-#-#   OPERMOTD CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you are using the opermotd module, specify the motd here         #
-#                                                                     #
-# onoper        - If on, the message is sent on /OPER, otherwise it's #
-#                 only sent when /OPERMOTD is used.                   #
-#                                                                     #
-#<opermotd file="oper.motd" onoper="yes">
-
-<module name="override">
-#-#-#-#-#-#-#-#-#-#-#   OVERRIDE CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# The override module is too complex to describe here, see the wiki:  #
-# https://wiki.inspircd.org/Modules/3.0/override                      #
-
-<module name="operlevels">
-<module name="opermodes">
-<module name="password_hash">
-<module name="muteban">
-
-<module name="redirect">
-<module name="regex_glob">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for PCRE (Perl-Compatible Regular
-# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use the filter
-# or the rline module.
-#<module name="regex_pcre">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for POSIX Regular Expressions.
-# You shouldn't need any additional libraries on a POSIX-compatible
-# system (ie: any Linux, BSD, but not Windows). You must have at least
-# 1 provider loaded to use the filter or rline module.
-# On POSIX-compliant systems, regex syntax can be found by using the
-# command: 'man 7 regex'.
-#<module name="regex_posix">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for TRE Regular Expressions.
-# This is the same regular expression engine used by UnrealIRCd, so
-# if you are most familiar with the syntax of /spamfilter from there,
-# this is the provider you want. You need libtre installed in order
-# to compile and load this module.
-#<module name="regex_tre">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation module. If enabled, only
-# registered users and opers can create new channels.
-#
-# You probably *DO NOT* want to load this module on a public network.
-#
-#<module name="regonlycreate">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels.
-#
-# You probably *DO NOT* want to load this module on a public network.
-#
-#<module name="restrictchans">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers.
-#
-# You probably *DO NOT* want to load this module on a public network.
-#
-#<module name="restrictmsg">
-
-<module name="sajoin">
-<module name="sakick">
-<module name="samode">
-<module name="sanick">
-<module name="sapart">
-<module name="saquit">
-<module name="satopic">
-<module name="servprotect">
-<module name="seenicks">
-<module name="setidle">
-<module name="services_account">
-<module name="sethost">
-<module name="setident">
-<module name="setname">
-<module name="showwhois">
-<showwhois opersonly="yes" showfromopers="yes">
-
-<module name="shun">
-<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="no" affectopers="no">
-
-<module name="sslmodes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
-# if enabled. You must answer 'yes' in ./configure when asked or symlink
-# the source for this module from the directory src/modules/extra, if
-# you want to enable this, or it will not load.
-#<module name="ssl_gnutls">
-#
-#-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# ssl_gnutls is too complex to describe here, see the wiki:           #
-# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls                    #
-
-<module name="sslinfo">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
-# if enabled. You must answer 'yes' in ./configure when asked or symlink
-# the source for this module from the directory src/modules/extra, if
-# you want to enable this, or it will not load.
-#<module name="ssl_openssl">
-#
-#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# ssl_openssl is too complex to describe here, see the wiki:          #
-# https://wiki.inspircd.org/Modules/3.0/ssl_openssl                   #
-
-<module name="stripcolor">
-<module name="svshold">
-<module name="swhois">
-<module name="tline">
-<module name="uhnames">
-<module name="userip">
-<module name="watch">
-<watch maxentries="32">
-
-<module name="spanningtree">
diff --git a/make/template/main.mk b/make/template/main.mk
index ff464a228..4845d0dde 100644
--- a/make/template/main.mk
+++ b/make/template/main.mk
@@ -221,7 +221,6 @@ install: target
 	@-$(INSTALL) -d -o $(INSTUID) -m $(INSTMODE_DIR) $(DATPATH)
 	@-$(INSTALL) -d -o $(INSTUID) -m $(INSTMODE_DIR) $(LOGPATH)
 	@-$(INSTALL) -d -m $(INSTMODE_DIR) $(BINPATH)
-	@-$(INSTALL) -d -m $(INSTMODE_DIR) $(CONPATH)/examples/modules
 	@-$(INSTALL) -d -m $(INSTMODE_DIR) $(CONPATH)/examples/services
 	@-$(INSTALL) -d -m $(INSTMODE_DIR) $(MANPATH)
 	@-$(INSTALL) -d -m $(INSTMODE_DIR) $(MODPATH)
@@ -242,7 +241,6 @@ endif
 	-$(INSTALL) -m $(INSTMODE_LIB) @CONFIGURE_DIRECTORY@/inspircd-genssl.1 $(MANPATH) 2>/dev/null
 	-$(INSTALL) -m $(INSTMODE_BIN) tools/genssl $(BINPATH)/inspircd-genssl 2>/dev/null
 	-$(INSTALL) -m $(INSTMODE_LIB) docs/conf/*.example $(CONPATH)/examples
-	-$(INSTALL) -m $(INSTMODE_LIB) docs/conf/modules/*.example $(CONPATH)/examples/modules
 	-$(INSTALL) -m $(INSTMODE_LIB) docs/conf/services/*.example $(CONPATH)/examples/services
 	-$(INSTALL) -m $(INSTMODE_LIB) *.pem $(CONPATH) 2>/dev/null
 	@echo ""