summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/ABOUT33
-rw-r--r--doc/doc-docbook/ABOUT16
-rw-r--r--doc/doc-docbook/AdMarkup.txt434
-rw-r--r--doc/doc-docbook/HowItWorks.txt541
-rw-r--r--doc/doc-docbook/Makefile177
-rw-r--r--doc/doc-docbook/MyAsciidoc.conf205
-rw-r--r--doc/doc-docbook/MyStyle-chunk-html.xsl20
-rw-r--r--doc/doc-docbook/MyStyle-filter-fo.xsl55
-rw-r--r--doc/doc-docbook/MyStyle-fo.xsl241
-rw-r--r--doc/doc-docbook/MyStyle-html.xsl171
-rw-r--r--doc/doc-docbook/MyStyle-nochunk-html.xsl11
-rw-r--r--doc/doc-docbook/MyStyle-spec-fo.xsl17
-rw-r--r--doc/doc-docbook/MyStyle-txt-html.xsl23
-rw-r--r--doc/doc-docbook/MyStyle.xsl202
-rw-r--r--doc/doc-docbook/MyTitlepage.templates.xml101
-rw-r--r--doc/doc-docbook/Myhtml.css31
-rwxr-xr-xdoc/doc-docbook/Pre-xml173
-rwxr-xr-xdoc/doc-docbook/TidyHTML-filter79
-rwxr-xr-xdoc/doc-docbook/TidyHTML-spec139
-rwxr-xr-xdoc/doc-docbook/Tidytxt21
-rw-r--r--doc/doc-docbook/filter.ascd1759
-rw-r--r--doc/doc-docbook/spec.ascd33111
-rwxr-xr-xdoc/doc-docbook/x2man212
-rw-r--r--doc/doc-scripts/ABOUT9
-rw-r--r--doc/doc-src/ABOUT13
25 files changed, 37786 insertions, 8 deletions
diff --git a/doc/ABOUT b/doc/ABOUT
new file mode 100644
index 000000000..4bbaeafe0
--- /dev/null
+++ b/doc/ABOUT
@@ -0,0 +1,33 @@
+$Cambridge: exim/doc/ABOUT,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+CVS directory exim/exim-doc
+---------------------------
+
+This directory contains all the files related to Exim documentation. They are
+held in a number of subdirectories.
+
+doc-docbook This directory contains the AsciiDoc and DocBook sources for
+ the Exim specification and the filter description. It also
+ contains a Makefile and all the scripts, stylesheets, etc.
+ that are used to create the distributed renditions of the
+ documents. This way of creating the documentation was
+ introduced for release 4.60.
+
+doc-misc This directory contains a number of miscellaneous documents
+ that are relevant to Exim, but not part of its distribution
+ tarball.
+
+doc-scripts This directory contains scripts for building exported
+ documentation from the original SGCAL input source. These were
+ used up to and including release 4.50.
+
+doc-src This directory contains the SGCAL source documents that were
+ used up to and including release 4.50.
+
+doc-txt This directory contains documentation that is maintained only
+ as text files.
+
+Each of these directories contains an ABOUT file that describes its contents in
+more detail.
+
+End
diff --git a/doc/doc-docbook/ABOUT b/doc/doc-docbook/ABOUT
new file mode 100644
index 000000000..72048b569
--- /dev/null
+++ b/doc/doc-docbook/ABOUT
@@ -0,0 +1,16 @@
+$Cambridge: exim/doc/doc-docbook/ABOUT,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+CVS directory exim/exim-doc/doc-docbook
+---------------------------------------
+
+This directory contains the AsciiDoc and DocBook sources for the Exim
+specification and the filter description. It also contains a Makefile and all
+the scripts, stylesheets, etc. that are used to create the distributed
+renditions of the documents. This way of creating the documentation was
+introduced for release 4.60.
+
+The file HowItWorks.txt explains the processes by which the distributed
+renditions are created. It also contains a list of the files in this directory
+and what they all contain.
+
+End
diff --git a/doc/doc-docbook/AdMarkup.txt b/doc/doc-docbook/AdMarkup.txt
new file mode 100644
index 000000000..40942a629
--- /dev/null
+++ b/doc/doc-docbook/AdMarkup.txt
@@ -0,0 +1,434 @@
+$Cambridge: exim/doc/doc-docbook/AdMarkup.txt,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+Asciidoc markup used in the Exim documentation
+----------------------------------------------
+
+This file contains a summary of the AsciiDoc markup that is used in the source
+files of the Exim documentation. The source files are in plain text that can be
+edited by any text editor. They are converted by the AsciiDoc application into
+DocBook XML for subsequent processing into the various output formats.
+
+This markup requires AsciiDoc release 6.0.3 or later.
+
+The advantage of using AsciiDoc format as a "back end" is that is uses
+relatively simple markup in the majority of the text, making it easier to read
+and edit. The disadvantage is that it is tricky to deal with complicated
+formatting - though that is probably true of any markup language - and there
+are a few gotchas.
+
+The Exim documentation uses the default AsciiDoc markup with some additions. I
+have created a special AsciiDoc configuration file for use with the Exim
+documentation. You must use this configuration if you want to get sensible
+results,
+
+
+SPECIAL CHARACTERS
+
+When typing paragraphs of text, the following character sequences are
+recognized as markup if they occur surrounding a "word phrase" within a
+paragraph. In the list below, ... represents the text that is enclosed.
+
+ '...' single quotes italic:
+ used for email addresses, domains, local
+ parts, header names, user names
+
+ *...* asterisks bold
+ used for things like "*Note:*"
+
+ `...` backticks monospaced text
+ used for literal quoting
+
+ $...$ dollar Exim variable
+ maps to XML <varname> with leading $
+
+ %...% percent Exim option, command line option
+ maps to XML <option>
+
+ ^...^ circumflex Exim driver name, Unix command, filter command
+ maps to XML <command>
+
+ ^^...^^ double circumflex C function: maps to XML <function>
+
+ ^%...%^ circumflex percent parameter: maps to XML <parameter>
+ Not currently used
+
+ _..._ underscore file name: maps to XML <filename>
+
+ ``...'' backticks & quotes put word in quotation marks
+
+For example,
+
+ This is an 'italic phrase'. This is a _filename_ and a $variable$.
+ This ``word'' is in quote marks.
+
+These quoting characters are recognized only if they are not flanked by
+alphanumeric characters. Thus, for instance, an apostrophe within a word can be
+represented as a single quote without any problem. Quoting can be nested, but
+not overlapped. However, the resulting XML from nested quotes is not always
+valid, so nesting is best avoided. (For example, `xxx'yyy'xxx` generates an
+<emphasis> item within a <literal> item, and the DocBook DTD doesn't allow
+that.) However, one combination that does work is <literal> within an
+<emphasis>, so that is what you have to use if you want a boldface monospaced
+font. That is, use *`bold mono`* and not `*bold mono*`. Sigh.
+
+There are also some character sequences that are translated into non-Ascii
+characters:
+
+ -- en-dash (&#x2013;)
+ --- em-dash (&#x8212;)
+ ~ hard space (&#x00a0;)
+ !! dagger (&#x2020;}
+
+The two-character sequence ## is turned into nothing. It is useful for
+disambiguating markup. For example, something like
+
+ ``quoted ending in 'emphasized'''
+
+is ambiguous, and as AsciiDoc looks for the longest markup first, it doesn't do
+what you want. You have to code this as
+
+ ``quoted ending in 'emphasized'##''
+
+The dashes are recognized only when surrounded by white space. The special Exim
+AsciiDoc configuration also translates most apostrophes to a typographic
+apostrophe (&#x2019;). There are some cases where this doesn't work, for
+example, an apostrophe after a word in another font (because the quote
+character gets in the way). For this purpose, there is a named "attribute" that
+can be used. Named attributes are substituted inside curly braces.
+
+For example, in the filter document there is a reference to an imaginary user
+called lg303. User names are italicized, so this is always typed as 'lg303' but
+if an apostrophe-s is needed after it, you have to type
+
+ 'lg303'{ap}s
+
+Another named attribute is {tl}, which turns into a tilde character, because a
+literal tilde becomes a hard space.
+
+A third named attribute is {hh}, which turns into two hyphens, because a
+literal "--" is converted into an en dash.
+
+A fourth named attributs is {pc}, which turns into a percent sign.
+
+
+ESCAPING SPECIAL CHARACTERS
+
+Use backslash if you need to escape a special character.
+
+***** GOTCHA *****
+Backslash is not special when it precedes any other character. Thus, you need
+to know which characters are special, which is a pain.
+
+
+COMMENTS
+
+You can include comments that will not be copied to the XML document by
+creating a comment block that is delimited by at least three slashes. For
+example:
+
+ ///
+ This is an AsciiDoc comment block.
+ ///
+
+
+URL REFERENCES
+
+To refer to a URL, just put it in the text, followed by some text in square
+brackets to define the displayed text. If that is empty, the URL itself is
+displayed. For example, here's a reference to http://www.exim.org/[exim home
+page]. In HTML output, all you see is the display text; in printed output you
+see something like "exim home page [http://www.exim.org/]". The URL is printed
+in whatever is the current font, so it can be made bold by putting it in
+asterisks (for example).
+
+
+FORMAL PARAGRAPHS
+
+A formal paragraph has a title. This is normally typeset in bold at the start
+of the paragraph, and is useful as an alternative to a vertical labelled list
+(see below). To create such a paragraph, you just put its title first, like
+this:
+
+ [title="the title"]
+ Now give the text of the paragraph as usual.
+
+
+CHAPTERS AND SECTIONS
+
+AsciiDoc recognizes chapter and sections by looking for underlined lines, with
+the underlining character used to determine the type of section.
+
+ This is a chapter title
+ -----------------------
+
+ This is a section title
+ ~~~~~~~~~~~~~~~~~~~~~~~
+
+Chapter titles are used for running feet in the PDF form of the manual.
+Sometimes they are too long, causing them to be split in an ugly way. The
+solution to this is to define a short title for the chapter, like this:
+
+ [titleabbrev="short title"]
+ This is a rather long chapter title
+ -----------------------------------
+
+
+DISPLAYS
+
+Displayed blocks in a monospaced font can just be indented:
+
+ # Exim filter
+ deliver baggins@rivendell.middle-earth.example
+
+However, it seems that if the first line in such a block starts with an
+asterisk or if any lines in the block end in a backslash (as is quite often the
+case in Exim configuration examples), you have to use a "listing block" or a
+"literal block" instead of a "literal paragraph". Otherwise an initial asterisk
+makes AsciiDoc think this is a list item, and a terminating backslash causes
+lines to be concatenated.
+
+Another time when you have to use an explicit block is when a display forms
+part of a list item. This is because you have to indent such displays more than
+usual, because the processors don't appear to do this automatically.
+
+Listing blocks are delimited by lines of at least three hyphens; literal blocks
+are delimited by lines of at least four dots. For example:
+
+....
+/usr/sbin/sendmail -bf myfilter \
+ -f islington@never.where <test-message
+....
+
+Such blocks are indented by an amount that is specified in the style sheet, but
+this amount is always the same, regardless of whether the block is inside a
+list item (which is itself indented) or not. So if the block is within a list
+item, it must be explicitly indented as well.
+
+Blocks that are between lines of ampersands (at least 3 in each line) are
+displayed (by default) in the normal font, but with the lines unchanged. Quotes
+can be used in the block to specify different fonts. For example:
+
+&&&&
+`\n` is replaced by a newline
+`\r` is replaced by a carriage return
+`\t` is replaced by a tab
+&&&&
+
+When this kind of output is required within a list of any kind (see below), you
+must precede it with a line consisting of just a plus sign, because by default
+any kind of block terminates the list item.
+
+
+CROSS-REFERENCES
+
+To set a cross-reference point, enclose the name in double square brackets:
+
+ [[SECTexample]]
+
+To refer to a cross-reference point, enclose the name in double angle brackets:
+
+ <<SECTexample>>
+
+
+INDEX ENTRIES
+
+To create an index entry, include a line like one of these:
+
+ cindex:[primary text,secondary text]
+ oindex:[primary text,secondary text]
+
+at the appropriate point in the text. The first is for the "concept index" and
+the second is for the "options index". Not all forms of output distinguish
+between these - sometimes there is just one index.
+
+The index for the Exim reference manual has a number of "see also" entries.
+Rather than invent some fancy AsciiDoc way of doing this, I have just coded
+them in XML, using the AsciiDoc escape hatch that is described below under
+FUDGES.
+
+
+LISTS
+
+For a bulleted list, start each item in the list with a hyphen or an asterisk
+followed by a space:
+
+ - First item.
+ - Second item.
+
+For a numbered list, start each item with a dot followed by a space:
+
+ . First item.
+ . Second item.
+
+
+VERTICAL LABELLED LISTS
+
+These are used for Exim command line options and similar things. They map into
+XML <variablelist> items. Start the list with the item name, followed by two
+colons, on a line by itself. This is followed by the text for the list item.
+
+
+LISTS CONTAINING MORE THAN ONE PARAGRAPH
+
+If there is more than one paragraph in a list item, the second and subsequent
+ones must be preceded by a line containing just a single "+" character, as
+otherwise the list is terminated. Literal paragraphs can be included without
+any special markup. For example:
+
+ first item::
+ This is the pararaph that describes the item.
+
+ We can even have an indented display
+ within the item
+ +
+ but any more paragraphs must be preceded by a plus character
+ (otherwise they aren't included in the list, and won't be
+ properly indented).
+
+The "+" notation can also be used to include other kinds of block within a list
+item. It's needed for all block types except nested lists and literal
+paragraphs.
+
+An alternative approach to lists that contain multiple paragraphs or blocks
+within each item is to put a line containing just two hyphens immediately
+before and immediately after the list. For example:
+
+ --
+ . First item
+
+ Second paragraph of first item
+
+ . Second item
+
+ And so on
+ --
+
+This is particularly helpful for nested lists (see below).
+
+
+NESTED LISTS
+
+You can nest lists of different types. However, if you want to revert to an
+outer list item at the end of a nested list, you must use the "--" feature
+described above for the inner list, so that its end can be explicitly marked.
+For example:
+
+ . Outer list
+ +
+ Second paragraph in outer list
+ +
+ --
+ - Inner list item
+ - Inner list second item
+ --
+ +
+ Another paragraph in the outer list first item
+
+ . Next item in the outer list
+
+
+TABLES
+
+A fixed-width table is started by a line of hyphens that determines the width
+of the table, interspersed with the following column stop characters:
+
+ ` backtick align left
+ ' quote align right
+ . dot align centre
+
+The data is then aligned with the stop characters. For example:
+
+ `---`---
+ 1 2
+ 3 4
+ --------
+
+Alternatively, if tildes are used instead of hyphens, the data fields are
+comma-separated. Columns can also be specified numerically instead of by
+pattern. This is usually used with CSV data. For example:
+
+ `10`20`30~
+ one, two, three
+ ~~~~~
+
+This format is useful when the data is full of markup so that its final length
+bears little relationship to the input (for example, when there are cross
+references).
+
+By default, tables will be rendered with a frame at the top and bottom, and no
+separators between rows and columns. You can use AsciiDoc "attributes" to
+change this. Attributes are set by a sequence of name=value items in square
+brackets, before the thing to which they apply. For example:
+
+ [frame="none"]
+ `-----`-----
+ 11 22
+ 33 44
+ ------------
+
+The values for "frame" are "topbot", "sides", "all", or "none". There is also a
+"grid" attribute, whose possible values are "none", "cols", "rows", or "all".
+For example:
+
+ [frame="sides", grid="cols"]
+
+The commas between the attribute settings are important; if they are omitted,
+AsciiDoc ignores the attribute settings.
+
+
+EXIM CONFIGURATION OPTION HEADINGS
+
+Each Exim configuration option is formatted with its name, usage, type, and
+default value on a single line, spread over the line so as to fill it
+completely. The only way I know of aligning text using DocBook is to use a
+table. A special table format has been created to handle this special case. For
+example:
+
+ `..'=
+ %keep_malformed%, Use: 'main', Type: 'boolean', Default: 'false'
+ ===
+
+The first line defines four colums using stop characters, followed by an equals
+character that defines the table's "ruler" character. There is no need to
+define column widths, because the style forces the columns to fill the page
+width. The data is comma-separated.
+
+
+CHANGE BARS
+
+I haven't yet found a way of doing changebars in the printed versions. However,
+it is possible to put a green background behind changed text in the HTML
+version, so the appropriate markup should be used. Before a changed paragraph,
+insert
+
+ [revisionflag="changed"]
+
+This should precede any index settings at the start of the paragraph. If you
+want to do this for a display, you must use the "&&&" block described above,
+because that's the only type that I have set up to support it.
+
+
+FUDGES
+
+The current release of "fop", a program for producing PostScript from
+"formatting objects" (fo) data, which is an intermediate output that can be
+generated from DocBook XML, is not very good at page layout. For example, it
+can place a section heading as the last line on a page. I have set up a style
+that provides a means of forcing a page break in order to get round this. (But
+in practice, it happens so often that I have given up trying to use it.)
+
+At the AsciiDoc level, the markup uses a "backend block", which provides a way
+of specifying DocBook output directly. Backend blocks are surrounded by lines
+of plusses, and this particular fudge looks like this:
+
+ ++++++++++++
+ <?hard-pagebreak?>
+ ++++++++++++
+
+Backend blocks are used to insert XML comments into the output, to mark the
+start and end of Exim's command line options. These are used by the x2man
+script that creates the man page.
+
+
+Philip Hazel
+Last updated: 10 June 2005
diff --git a/doc/doc-docbook/HowItWorks.txt b/doc/doc-docbook/HowItWorks.txt
new file mode 100644
index 000000000..9be1466e2
--- /dev/null
+++ b/doc/doc-docbook/HowItWorks.txt
@@ -0,0 +1,541 @@
+$Cambridge: exim/doc/doc-docbook/HowItWorks.txt,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+CREATING THE EXIM DOCUMENTATION
+
+"You are lost in a maze of twisty little scripts."
+
+
+This document describes how the various versions of the Exim documentation, in
+different output formats, are created from DocBook XML, and also how the
+DocBook XML is itself created.
+
+
+BACKGROUND: THE OLD WAY
+
+From the start of Exim, in 1995, the specification was written in a local text
+formatting system known as SGCAL. This is capable of producing PostScript and
+plain text output from the same source file. Later, when the "ps2pdf" command
+became available with GhostScript, that was used to create a PDF version from
+the PostScript. (A few earlier versions were created by a helpful user who had
+bought the Adobe distiller software.)
+
+A demand for a version in "info" format led me to write a Perl script that
+converted the SGCAL input into a Texinfo file. Because of the somewhat
+restrictive requirements of Texinfo, this script has always needed a lot of
+maintenance, and has never been 100% satisfactory.
+
+The HTML version of the documentation was originally produced from the Texinfo
+version, but later I wrote another Perl script that produced it directly from
+the SGCAL input, which made it possible to produce better HTML.
+
+There were a small number of diagrams in the documentation. For the PostScript
+and PDF versions, these were created using Aspic, a local text-driven drawing
+program that interfaces directly to SGCAL. For the text and texinfo versions,
+alternative ascii-art diagrams were used. For the HTML version, screen shots of
+the PostScript output were turned into gifs.
+
+
+A MORE STANDARD APPROACH
+
+Although in principle SGCAL and Aspic could be generally released, they would
+be unlikely to receive much (if any) maintenance, especially after I retire.
+Furthermore, the old production method was only semi-automatic; I still did a
+certain amount of hand tweaking of spec.txt, for example. As the maintenance of
+Exim itself was being opened up to a larger group of people, it seemed sensible
+to move to a more standard way of producing the documentation, preferable fully
+automated. However, we wanted to use only non-commercial software to do this.
+
+At the time I was thinking about converting (early 2005), the "obvious"
+standard format in which to keep the documentation was DocBook XML. The use of
+XML in general, in many different applications, was increasing rapidly, and it
+seemed likely to remain a standard for some time to come. DocBook offered a
+particular form of XML suited to documents that were effectively "books".
+
+Maintaining an XML document by hand editing is a tedious, verbose, and
+error-prone process. A number of specialized XML text editors were available,
+but all the free ones were at a very primitive stage. I therefore decided to
+keep the master source in AsciiDoc format (described below), from which a
+secondary XML master could be automatically generated.
+
+All the output formats are generated from the XML file. If, in the future, a
+better way of maintaining the XML source becomes available, this can be adopted
+without changing any of the processing that produces the output documents.
+Equally, if better ways of processing the XML become available, they can be
+adopted without affecting the source maintenance.
+
+A number of issues arose while setting this all up, which are best summed up by
+the statement that a lot of the technology is (in 2005) still very immature. It
+is probable that trying to do this conversion any earlier would not have been
+anywhere near as successful. The main problems that still bother me are
+described in the penultimate section of this document.
+
+The following sections describe the processes by which the AsciiDoc files are
+transformed into the final output documents. In practice, the details are coded
+into a makefile that specifies the chain of commands for each output format.
+
+
+REQUIRED SOFTWARE
+
+Installing software to process XML puts lots and lots of stuff on your box. I
+run Gentoo Linux, and a lot of things have been installed as dependencies that
+I am not fully aware of. This is what I know about (version numbers are current
+at the time of writing):
+
+. AsciiDoc 6.0.3
+
+ This converts the master source file into a DocBook XML file, using a
+ customized AsciiDoc configuration file.
+
+. xmlto 0.0.18
+
+ This is a shell script that drives various XML processors. It is used to
+ produce "formatted objects" for PostScript and PDF output, and to produce
+ HTML output. It uses xsltproc, libxml, libxslt, libexslt, and possibly other
+ things that I have not figured out, to apply the DocBook XSLT stylesheets.
+
+. libxml 1.8.17
+ libxml2 2.6.17
+ libxslt 1.1.12
+
+ These are all installed on my box; I do not know which of libxml or libxml2
+ the various scripts are actually using.
+
+. xsl-stylesheets-1.66.1
+
+ These are the standard DocBook XSL stylesheets.
+
+. fop 0.20.5
+
+ FOP is a processor for "formatted objects". It is written in Java. The fop
+ command is a shell script that drives it.
+
+. w3m 0.5.1
+
+ This is a text-oriented web brower. It is used to produce the Ascii form of
+ the Exim documentation from a specially-created HTML format. It seems to do a
+ better job than lynx.
+
+. docbook2texi (part of docbook2X 0.8.5)
+
+ This is a wrapper script for a two-stage conversion process from DocBook to a
+ Texinfo file. It uses db2x_xsltproc and db2x_texixml. Unfortunately, there
+ are two versions of this command; the old one is based on an earlier fork of
+ docbook2X and does not work.
+
+. db2x_xsltproc and db2x_texixml (part of docbook2X 0.8.5)
+
+ More wrapping scripts (see previous item).
+
+. makeinfo 4.8
+
+ This is used to make a set of "info" files from a Texinfo file.
+
+In addition, there are some locally written Perl scripts. These are described
+below.
+
+
+ASCIIDOC
+
+AsciiDoc (http://www.methods.co.nz/asciidoc/) is a Python script that converts
+an input document in a more-or-less human-readable format into DocBook XML.
+For a document as complex as the Exim specification, the markup is quite
+complex - probably no simpler than the original SGCAL markup - but it is
+definitely easier to work with than XML itself.
+
+AsciiDoc is highly configurable. It comes with a default configuration, but I
+have extended this with an additional configuration file that must be used when
+processing the Exim documents. There is a separate document called AdMarkup.txt
+that describes the markup that is used in these documents. This includes the
+default AsciiDoc markup and the local additions.
+
+The author of AsciiDoc uses the extension .txt for input documents. I find
+this confusing, especially as some of the output files have .txt extensions.
+Therefore, I have used the extension .ascd for the sources.
+
+
+THE MAKEFILE
+
+The makefile supports a number of targets of the form x.y, where x is one of
+"filter", "spec", or "test", and y is one of "xml", "fo", "ps", "pdf", "html",
+"txt", or "info". The intermediate targets "x.xml" and "x.fo" are provided for
+testing purposes. The other five targets are production targets. For example:
+
+ make spec.pdf
+
+This runs the necessary tools in order to create the file spec.pdf from the
+original source spec.ascd. A number of intermediate files are created during
+this process, including the master DocBook source, called spec.xml. Of course,
+the usual features of "make" ensure that if this already exists and is
+up-to-date, it is not needlessly rebuilt.
+
+The "test" series of targets were created so that small tests could easily be
+run fairly quickly, because processing even the shortish filter document takes
+a bit of time, and processing the main specification takes ages.
+
+Another target is "exim.8". This runs a locally written Perl script called
+x2man, which extracts the list of command line options from the spec.xml file,
+and creates a man page. There are some XML comments in the spec.xml file to
+enable the script to find the start and end of the options list.
+
+There is also a "clean" target that deletes all the generated files.
+
+
+CREATING DOCBOOK XML FROM ASCIIDOC
+
+There is a single local AsciiDoc configuration file called MyAsciidoc.conf.
+Using this, one run of the asciidoc command creates a .xml file from a .ascd
+file. When this succeeds, there is no output.
+
+
+DOCBOOK PROCESSING
+
+Processing a .xml file into the five different output formats is not entirely
+straightforward. For a start, the same XML is not suitable for all the
+different output styles. When the final output is in a text format (.txt,
+.texinfo) for instance, all non-Ascii characters in the input must be converted
+to Ascii transliterations because the current processing tools do not do this
+correctly automatically.
+
+In order to cope with these issues in a flexible way, a Perl script called
+Pre-xml was written. This is used to preprocess the .xml files before they are
+handed to the main processors. Adding one more tool onto the front of the
+processing chain does at least seem to be in the spirit of XML processing.
+
+The XML processors themselves make use of style files, which can be overridden
+by local versions. There is one that applies to all styles, called MyStyle.xsl,
+and others for the different output formats. I have included comments in these
+style files to explain what changes I have made. Some of the changes are quite
+significant.
+
+
+THE PRE-XML SCRIPT
+
+The Pre-xml script copies a .xml file, making certain changes according to the
+options it is given. The currently available options are as follows:
+
+-abstract
+
+ This option causes the <abstract> element to be removed from the XML. The
+ source abuses the <abstract> element by using it to contain the author's
+ address so that it appears on the title page verso in the printed renditions.
+ This just gets in the way for the non-PostScript/PDF renditions.
+
+-ascii
+
+ This option is used for Ascii output formats. It makes the following
+ character replacements:
+
+ &8230; => ... (sic, no #x)
+ &#x2019; => ' apostrophe
+ &#x201C; => " opening double quote
+ &#x201D; => " closing double quote
+ &#x2013; => - en dash
+ &#x2020; => * dagger
+ &#x2021; => ** double dagger
+ &#x00a0; => a space hard space
+ &#x00a9; => (c) copyright
+
+ In addition, this option causes quotes to be put round <literal> text items,
+ and <quote> and </quote> to be replaced by Ascii quote marks. You would think
+ the stylesheet would cope with the latter, but it seems to generate non-Ascii
+ characters that w3m then turns into question marks.
+
+-bookinfo
+
+ This option causes the <bookinfo> element to be removed from the XML. It is
+ used for the PostScript/PDF forms of the filter document, in order to avoid
+ the generation of a full title page.
+
+-fi
+
+ Replace any occurrence of "fi" by the ligature &#xFB01; except when it is
+ inside an XML element, or inside a <literal> part of the text.
+
+ The use of ligatures would be nice for the PostScript and PDF formats. Sadly,
+ it turns out that fop cannot at present handle the FB01 character correctly.
+ The only format that does so is the HTML format, but when I used this in the
+ test version, people complained that it made searching for words difficult.
+ So at the moment, this option is not used. :-(
+
+-noindex
+
+ Remove the XML to generate a Concept Index and an Options index.
+
+-oneindex
+
+ Remove the XML to generate a Concept and an Options Index, and add XML to
+ generate a single index.
+
+The source document has two types of index entry, for a concept and an options
+index. However, no index is required for the .txt and .texinfo outputs.
+Furthermore, the only output processor that supports multiple indexes is the
+processor that produces "formatted objects" for PostScript and PDF output. The
+HTML processor ignores the XML settings for multiple indexes and just makes one
+unified index. Specifying two indexes gets you two copies of the same index, so
+this has to be changed.
+
+
+CREATING POSTSCRIPT AND PDF
+
+These two output formats are created in three stages. First, the XML is
+pre-processed. For the filter document, the <bookinfo> element is removed so
+that no title page is generated, but for the main specification, no changes are
+currently made.
+
+Second, the xmlto command is used to produce a "formatted objects" (.fo) file.
+This process uses the following stylesheets:
+
+ (1) Either MyStyle-filter-fo.xsl or MyStyle-spec-fo.xsl
+ (2) MyStyle-fo.xsl
+ (3) MyStyle.xsl
+ (4) MyTitleStyle.xsl
+
+The last of these is not used for the filter document, which does not have a
+title page. The first three stylesheets were created manually, either by typing
+directly, or by coping from the standard style sheet and editing.
+
+The final stylesheet has to be created from a template document, which is
+called MyTitlepage.templates.xml. This was copied from the standard styles and
+modified. The template is processed with xsltproc to produce the stylesheet.
+All this apparatus is appallingly heavyweight. The processing is also very slow
+in the case of the specification document. However, there should be no errors.
+
+In the third and final part of the processing, the .fo file that is produced by
+the xmlto command is processed by the fop command to generate either PostScript
+or PDF. This is also very slow, and you get a whole slew of errors, of which
+these are a sample:
+
+ [ERROR] property - "background-position-horizontal" is not implemented yet.
+
+ [ERROR] property - "background-position-vertical" is not implemented yet.
+
+ [INFO] JAI support was not installed (read: not present at build time).
+ Trying to use Jimi instead
+ Error creating background image: Error creating FopImage object (Error
+ creating FopImage object
+ (http://docbook.sourceforge.net/release/images/draft.png) :
+ org.apache.fop.image.JimiImage
+
+ [WARNING] table-layout=auto is not supported, using fixed!
+
+ [ERROR] Unknown enumerated value for property 'span': inherit
+
+ [ERROR] Error in span property value 'inherit':
+ org.apache.fop.fo.expr.PropertyException: No conversion defined
+
+ [ERROR] Areas pending, text probably lost in lineinclude parts matched in the
+ response by response_pattern by means of numeric variables such as
+
+The last one is particularly meaningless gobbledegook. Some of the errors and
+warnings are repeated many times. Nevertheless, it does eventually produce
+usable output, though I have a number of issues with it (see a later section of
+this document). Maybe one day there will be a new release of fop that does
+better. Maybe there will be some other means of producing PostScript and PDF
+from DocBook XML. Maybe porcine aeronautics will really happen.
+
+
+CREATING HTML
+
+Only two stages are needed to produce HTML, but the main specification is
+subsequently postprocessed. The Pre-xml script is called with the -abstract and
+-oneindex options to preprocess the XML. Then the xmlto command creates the
+HTML output directly. For the specification document, a directory of files is
+created, whereas the filter document is output as a single HTML page. The
+following stylesheets are used:
+
+ (1) Either MyStyle-chunk-html.xsl or MyStyle-nochunk-html.xsl
+ (2) MyStyle-html.xsl
+ (3) MyStyle.xsl
+
+The first stylesheet references the chunking or non-chunking standard
+stylesheet, as appropriate.
+
+The original HTML that I produced from the SGCAL input had hyperlinks back from
+chapter and section titles to the table of contents. These links are not
+generated by xmlto. One of the testers pointed out that the lack of these
+links, or simple self-referencing links for titles, makes it harder to copy a
+link name into, for example, a mailing list response.
+
+I could not find where to fiddle with the stylesheets to make such a change, if
+indeed the stylesheets are capable of it. Instead, I wrote a Perl script called
+TidyHTML-spec to do the job for the specification document. It updates the
+index.html file (which contains the the table of contents) setting up anchors,
+and then updates all the chapter files to insert appropriate links.
+
+The index.html file as built by xmlto contains the whole table of contents in a
+single line, which makes is hard to debug by hand. Since I was postprocessing
+it anyway, I arranged to insert newlines after every '>' character.
+
+The TidyHTML-spec script also takes the opportunity to postprocess the
+spec.html/ix01.html file, which contains the document index. Again, the index
+is generated as one single line, so it splits it up. Then it creates a list of
+letters at the top of the index and hyperlinks them both ways from the
+different letter portions of the index.
+
+People wanted similar postprocessing for the filter.html file, so that is now
+done using a similar script called TidyHTML-filter. It was easier to use a
+separate script because filter.html is a single file rather than a directory,
+so the logic is somewhat different.
+
+
+CREATING TEXT FILES
+
+This happens in four stages. The Pre-xml script is called with the -abstract,
+-ascii and -noindex options to remove the <abstract> element, convert the input
+to Ascii characters, and to disable the production of an index. Then the xmlto
+command converts the XML to a single HTML document, using these stylesheets:
+
+ (1) MyStyle-txt-html.xsl
+ (2) MyStyle-html.xsl
+ (3) MyStyle.xsl
+
+The MyStyle-txt-html.xsl stylesheet is the same as MyStyle-nochunk-html.xsl,
+except that it contains an addition item to ensure that a generated "copyright"
+symbol is output as "(c)" rather than the Unicode character. This is necessary
+because the stylesheet itself generates a copyright symbol as part of the
+document title; the character is not in the original input.
+
+The w3m command is used with the -dump option to turn the HTML file into Ascii
+text, but this contains multiple sequences of blank lines that make it look
+awkward, so, finally, a local Perl script called Tidytxt is used to convert
+sequences of blank lines into a single blank line.
+
+
+CREATING INFO FILES
+
+This process starts with the same Pre-xml call as for text files. The
+<abstract> element is deleted, non-ascii characters in the source are
+transliterated, and the <index> elements are removed. The docbook2texi script
+is then called to convert the XML file into a Texinfo file. However, this is
+not quite enough. The converted file ends up with "conceptindex" and
+"optionindex" items, which are not recognized by the makeinfo command. An
+in-line call to Perl in the Makefile changes these to "cindex" and "findex"
+respectively in the final .texinfo file. Finally, a call of makeinfo creates a
+set of .info files.
+
+There is one apparently unconfigurable feature of docbook2texi: it does not
+seem possible to give it a file name for its output. It chooses a name based on
+the title of the document. Thus, the main specification ends up in a file
+called the_exim_mta.texi and the filter document in exim_filtering.texi. These
+files are removed after their contents have been copied and modified by the
+inline Perl call, which makes a .texinfo file.
+
+
+CREATING THE MAN PAGE
+
+I wrote a Perl script called x2man to create the exim.8 man page from the
+DocBook XML source. I deliberately did NOT start from the AsciiDoc source,
+because it is the DocBook source that is the "standard". This comment line in
+the DocBook source marks the start of the command line options:
+
+ <!-- === Start of command line options === -->
+
+A similar line marks the end. If at some time in the future another way other
+than AsciiDoc is used to maintain the DocBook source, it needs to be capable of
+maintaining these comments.
+
+
+UNRESOLVED PROBLEMS
+
+There are a number of unresolved problems with producing the Exim documentation
+in the manner described above. I will describe them here in the hope that in
+future some way round them can be found.
+
+(1) Errors in the toolchain
+
+ When a whole chain of tools is processing a file, an error somewhere in
+ the middle is often very hard to debug. For instance, an error in the
+ AsciiDoc might not show up until an XML processor throws a wobbly because
+ the generated XML is bad. You have to be able to read XML and figure out
+ what generated what. One of the reasons for creating the "test" series of
+ targets was to help in checking out these kinds of problem.
+
+(2) There is a mechanism in XML for marking parts of the document as
+ "revised", and I have arranged for AsciiDoc markup to use it. However, at
+ the moment, the only output format that pays attention to this is the HTML
+ output, which sets a green background. There are therefore no revision
+ marks (change bars) in the PostScript, PDF, or text output formats as
+ there used to be. (There never were for Texinfo.)
+
+(3) The index entries in the HTML format take you to the top of the section
+ that is referenced, instead of to the point in the section where the index
+ marker was set.
+
+(4) The HTML output supports only a single index, so the concept and options
+ index entries have to be merged.
+
+(5) The index for the PostScript/PDF output does not merge identical page
+ numbers, which makes some entries look ugly.
+
+(6) None of the indexes (PostScript/PDF and HTML) make use of textual
+ markup; the text is all roman, without any italic or boldface.
+
+(7) I turned off hyphenation in the PostScript/PDF output, because it was
+ being done so badly.
+
+ (a) It seems to force hyphenation if it is at all possible, without
+ regard to the "tightness" or "looseness" of the line. Decent
+ formatting software should attempt hyphenation only if the line is
+ over some "looseness" threshold; otherwise you get far too many
+ hyphenations, often for several lines in succession.
+
+ (b) It uses an algorithmic form of hyphenation that doesn't always produce
+ acceptable word breaks. (I prefer to use a hyphenation dictionary.)
+
+(8) The PostScript/PDF output is badly paginated:
+
+ (a) There seems to be no attempt to avoid "widow" and "orphan" lines on
+ pages. A "widow" is the last line of a paragraph at the top of a page,
+ and an "orphan" is the first line of a paragraph at the bottom of a
+ page.
+
+ (b) There seems to be no attempt to prevent section headings being placed
+ last on a page, with no following text on the page.
+
+(9) The fop processor does not support "fi" ligatures, not even if you put the
+ appropriate Unicode character into the source by hand.
+
+(10) There are no diagrams in the new documentation. This is something I could
+ work on. The previously-used Aspic command for creating line art from a
+ textual description can output Encapsulated PostScript or Scalar Vector
+ Graphics, which are two standard diagram representations. Aspic could be
+ formally released and used to generate output that could be included in at
+ least some of the output formats.
+
+The consequence of (7), (8), and (9) is that the PostScript/PDF output looks as
+if it comes from some of the very early attempts at text formatting of around
+20 years ago. We can only hope that 20 years' progress is not going to get
+lost, and that things will improve in this area.
+
+
+LIST OF FILES
+
+AdMarkup.txt Describes the AsciiDoc markup that is used
+HowItWorks.txt This document
+Makefile The makefile
+MyAsciidoc.conf Localized AsciiDoc configuration
+MyStyle-chunk-html.xsl Stylesheet for chunked HTML output
+MyStyle-filter-fo.xsl Stylesheet for filter fo output
+MyStyle-fo.xsl Stylesheet for any fo output
+MyStyle-html.xsl Stylesheet for any HTML output
+MyStyle-nochunk-html.xsl Stylesheet for non-chunked HTML output
+MyStyle-spec-fo.xsl Stylesheet for spec fo output
+MyStyle-txt-html.xsl Stylesheet for HTML=>text output
+MyStyle.xsl Stylesheet for all output
+MyTitleStyle.xsl Stylesheet for spec title page
+MyTitlepage.templates.xml Template for creating MyTitleStyle.xsl
+Myhtml.css Experimental css stylesheet for HTML output
+Pre-xml Script to preprocess XML
+TidyHTML-filter Script to tidy up the filter HTML output
+TidyHTML-spec Script to tidy up the spec HTML output
+Tidytxt Script to compact multiple blank lines
+filter.ascd AsciiDoc source of the filter document
+spec.ascd AsciiDoc source of the specification document
+x2man Script to make the Exim man page from the XML
+
+The file Myhtml.css was an experiment that was not followed through. It is
+mentioned in a comment in MyStyle-html.xsl, but is not at present in use.
+
+
+Philip Hazel
+Last updated: 10 June 2005
diff --git a/doc/doc-docbook/Makefile b/doc/doc-docbook/Makefile
new file mode 100644
index 000000000..802f74085
--- /dev/null
+++ b/doc/doc-docbook/Makefile
@@ -0,0 +1,177 @@
+# $Cambridge: exim/doc/doc-docbook/Makefile,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Make file for Exim documentation from Asciidoc source.
+
+notarget:; @echo "** You must specify a target, in the form x.y, where x is 'filter', 'spec',"
+ @echo "** or 'test', and y is 'xml', 'fo', 'ps', 'pdf', 'html', 'txt', or 'info'."
+ @echo "** One other possible target is 'exim.8'".
+ exit 1
+
+
+############################## MAN PAGE ################################
+
+exim.8: spec.xml
+ ./x2man
+
+########################################################################
+
+
+############################### FILTER #################################
+
+filter.xml: filter.ascd MyAsciidoc.conf
+ asciidoc -d book -b docbook -f MyAsciidoc.conf filter.ascd
+
+filter-fo.xml: filter.xml Pre-xml
+ Pre-xml -bookinfo <filter.xml >filter-fo.xml
+
+filter-html.xml: filter.xml Pre-xml
+ Pre-xml <filter.xml >filter-html.xml
+
+filter-txt.xml: filter.xml Pre-xml
+ Pre-xml -ascii <filter.xml >filter-txt.xml
+
+filter.fo: filter-fo.xml MyStyle-filter-fo.xsl MyStyle-fo.xsl MyStyle.xsl
+ /bin/rm -rf filter.fo filter-fo.fo
+ xmlto -x MyStyle-filter-fo.xsl fo filter-fo.xml
+ /bin/mv -f filter-fo.fo filter.fo
+
+filter.ps: filter.fo
+ fop filter.fo -ps filter.ps
+
+filter.pdf: filter.fo
+ fop filter.fo -pdf filter.pdf
+
+filter.html: filter-html.xml TidyHTML-filter MyStyle-nochunk-html.xsl MyStyle-html.xsl MyStyle.xsl
+ /bin/rm -rf filter.html filter-html.html
+ xmlto -x MyStyle-nochunk-html.xsl html-nochunks filter-html.xml
+ /bin/mv -f filter-html.html filter.html
+ ./TidyHTML-filter
+
+filter.txt: filter-txt.xml Tidytxt MyStyle-txt-html.xsl MyStyle-html.xsl MyStyle.xsl
+ /bin/rm -rf filter-txt.html
+ xmlto -x MyStyle-txt-html.xsl html-nochunks filter-txt.xml
+ w3m -dump filter-txt.html >filter.txt
+
+# I have not found a way of making docbook2texi write its output anywhere
+# other than the file name that it makes up. The --to-stdout option does not
+# work.
+
+filter.info: filter-txt.xml
+ docbook2texi filter-txt.xml
+ perl -ne 's/conceptindex/cindex/;s/optionindex/findex/;print;' \
+ <exim_filtering.texi | Tidytxt >filter.texinfo
+ /bin/rm -rf exim_filtering.texi
+ makeinfo -o filter.info filter.texinfo
+
+########################################################################
+
+
+################################ SPEC ##################################
+
+spec.xml: spec.ascd MyAsciidoc.conf
+ asciidoc -d book -b docbook -f MyAsciidoc.conf spec.ascd
+
+spec-fo.xml: spec.xml Pre-xml
+ Pre-xml <spec.xml >spec-fo.xml
+
+spec-html.xml: spec.xml Pre-xml
+ Pre-xml -abstract -oneindex <spec.xml >spec-html.xml
+
+spec-txt.xml: spec.xml Pre-xml
+ Pre-xml -abstract -ascii -noindex <spec.xml >spec-txt.xml
+
+spec.fo: spec-fo.xml MyStyle-spec-fo.xsl MyStyle-fo.xsl MyStyle.xsl MyTitleStyle.xsl
+ /bin/rm -rf spec.fo spec-fo.fo
+ xmlto -x MyStyle-spec-fo.xsl fo spec-fo.xml
+ /bin/mv -f spec-fo.fo spec.fo
+
+spec.ps: spec.fo
+ FOP_OPTS=-Xmx512m fop spec.fo -ps spec.ps
+
+spec.pdf: spec.fo
+ FOP_OPTS=-Xmx512m fop spec.fo -pdf spec.pdf
+
+spec.html: spec-html.xml TidyHTML-spec MyStyle-chunk-html.xsl MyStyle-html.xsl MyStyle.xsl
+ /bin/rm -rf spec.html
+ xmlto -x MyStyle-chunk-html.xsl -o spec.html html spec-html.xml
+ ./TidyHTML-spec
+
+spec.txt: spec-txt.xml Tidytxt MyStyle-txt-html.xsl MyStyle-html.xsl MyStyle.xsl
+ /bin/rm -rf spec-txt.html
+ xmlto -x MyStyle-txt-html.xsl html-nochunks spec-txt.xml
+ w3m -dump spec-txt.html | Tidytxt >spec.txt
+
+# I have not found a way of making docbook2texi write its output anywhere
+# other than the file name that it makes up. The --to-stdout option does not
+# work.
+
+spec.info: spec-txt.xml
+ docbook2texi spec-txt.xml
+ perl -ne 's/conceptindex/cindex/;s/optionindex/findex/;print;' \
+ <the_exim_mta.texi >spec.texinfo
+ /bin/rm -rf the_exim_mta.texi
+ makeinfo -o spec.info spec.texinfo
+
+########################################################################
+
+
+################################ TEST ##################################
+
+# These targets (similar to the above) are for running little tests.
+
+test.xml: test.ascd MyAsciidoc.conf
+ asciidoc -d book -b docbook -f MyAsciidoc.conf test.ascd
+
+test-fo.xml: test.xml Pre-xml
+ ./Pre-xml <test.xml >test-fo.xml
+
+test-html.xml: test.xml Pre-xml
+ ./Pre-xml -abstract -oneindex <test.xml >test-html.xml
+
+test-txt.xml: test.xml Pre-xml
+ ./Pre-xml -abstract -ascii -noindex <test.xml >test-txt.xml
+
+test.fo: test-fo.xml MyStyle-spec-fo.xsl MyStyle-fo.xsl MyStyle.xsl MyTitleStyle.xsl
+ /bin/rm -rf test.fo test-fo.fo
+ xmlto -x MyStyle-spec-fo.xsl fo test-fo.xml
+ /bin/mv -f test-fo.fo test.fo
+
+test.ps: test.fo
+ fop test.fo -ps test.ps
+
+test.pdf: test.fo
+ fop test.fo -pdf test.pdf
+
+test.html: test-html.xml MyStyle-nochunk-html.xsl MyStyle-html.xsl MyStyle.xsl
+ /bin/rm -rf test.html test-html.html
+ xmlto -x MyStyle-nochunk-html.xsl html-nochunks test-html.xml
+ /bin/mv -f test-html.html test.html
+
+test.txt: test-txt.xml Tidytxt MyStyle-txt-html.xsl MyStyle-html.xsl MyStyle.xsl
+ /bin/rm -rf test-txt.html
+ xmlto -x MyStyle-txt-html.xsl html-nochunks test-txt.xml
+ w3m -dump test-txt.html | Tidytxt >test.txt
+
+# I have not found a way of making docbook2texi write its output anywhere
+# other than the file name that it makes up. The --to-stdout option does not
+# work.
+
+test.info: test-txt.xml
+ docbook2texi test-txt.xml
+ perl -ne 's/conceptindex/cindex/;s/optionindex/findex/;print;' \
+ <short_title.texi >test.texinfo
+ /bin/rm -rf short_title.texi
+ makeinfo -o test.info test.texinfo
+
+########################################################################
+
+
+################################ CLEAN #################################
+
+clean:; /bin/rm -rf exim.8 \
+ filter*.xml spec*.xml test*.xml \
+ *.fo *.html *.pdf *.ps \
+ filter*.txt spec*.txt test*.txt \
+ *.info* *.texinfo *.texi
+
+########################################################################
diff --git a/doc/doc-docbook/MyAsciidoc.conf b/doc/doc-docbook/MyAsciidoc.conf
new file mode 100644
index 000000000..4b09e5a6a
--- /dev/null
+++ b/doc/doc-docbook/MyAsciidoc.conf
@@ -0,0 +1,205 @@
+# $Cambridge: exim/doc/doc-docbook/MyAsciidoc.conf,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Asciidoc configuration customization for creating the DocBook XML sources
+# of the Exim specification and the filter document.
+
+[miscellaneous]
+newline=\n
+
+[quotes]
+_=filename
+$=varname
+%=option
+^=command
+^^=function
+^%|%^=parameter
+``|''=quoted
+
+[tags]
+strong=<emphasis role="bold">|</emphasis>
+
+filename=<filename>|</filename>
+varname=<varname>$|</varname>
+option=<option>|</option>
+command=<command>|</command>
+function=<function>|</function>
+parameter=<parameter>|</parameter>
+quoted=<quote>|</quote>
+
+
+[replacements]
+# Nothing - this is for disambiguating markup
+"##"=
+
+# -- En dash
+(^|[^-])--($|[^-])=\1&#x2013;\2
+
+# --- Em dash
+(^|\s+)---($|\s+)=\1&#x8212;\2
+
+# -- Hard space
+~=&#x00a0;
+
+# ' automatic apostrophe
+([A-Za-z0-9])'([A-Za-z\s])=\1&#x2019;\2
+
+# daggers
+!!=&#x2020;
+!\?=&#x2021;
+
+# The default markup recognizes subscripts and superscripts using tilde and
+# circumflex. We don't want this. These settings manage to turn off the
+# effect, while still allowing tilde to be recognized as a hard space.
+\^(.+?)\^=^\1^
+~(.+?)~=~\1~
+
+
+[attributes]
+# Manual apostrophe: needed for an apostrophe after something quoted, because
+# I can't get the automatic one to work in that situation
+ap=&#x2019;
+
+# Manual tilde: tilde is defined as a hard space, and it doesn't seem possible
+# to quote is using a backslash.
+tl=&#x007e;
+
+# Two hyphens, to stop them being treated as an en dash
+hh=&#x002d;&#x002d;
+
+# Percent: causes confusion with the quote otherwise
+pc=&#x0025;
+
+# Colon: there's a case where this causes trouble
+co=&#x003A;
+
+# The sequence "[]" for use in index terms
+bk=&#x005B;&#x005D;
+
+
+# We need to add extra stuff to the <bookinfo> element
+
+[header]
+<?xml {xmldecl}?>
+<!DOCTYPE book {dtddecl}>
+
+<book lang="en">
+{doctitle#}<bookinfo>
+ <title>{doctitle}</title>
+ <titleabbrev>{doctitleabbrev}</titleabbrev>
+ <date>{date}</date>
+ {authored#}<author>
+ <firstname>{firstname}</firstname>
+ <othername>{middlename}</othername>
+ <surname>{lastname}</surname>
+ {authored#}</author>
+ <authorinitials>{authorinitials}</authorinitials>
+ {revisionhistory%}<revhistory><revision><revnumber>{revision}</revnumber><date>{date}</date>{authorinitials?<authorinitials>{authorinitials}</authorinitials>}{revremark?<revremark>{revremark}</revremark>}</revision></revhistory>
+ <corpname>{companyname}</corpname>
+ <othercredit><contrib>{othercredit},</contrib></othercredit>
+ {copyright#}<copyright><year>{cpyear}</year><holder>{copyright}</holder></copyright>
+ <abstract><para>{abstract}</para></abstract>
+{doctitle#}</bookinfo>
+
+
+# Define a new kind of block that maps to <literallayout> so as not to
+# insist on a monospaced font. Delimiter is &&&.
+
+[blockdef-literallayout]
+delimiter=^&{3,}(\[(?P<args>.*)\])?=*$
+template=literallayoutblock
+presubs=specialcharacters,quotes,replacements,macros,callouts
+
+# The template for my non-monospaced literal layout block
+
+[literallayoutblock]
+<literallayout{revisionflag? revisionflag="{revisionflag}"}>
+|
+</literallayout>
+
+
+# Paragraph substitution - use <para> rather than <simplepara>
+
+[paragraph]
+{title#}<formalpara{id? id="{id}"{revisionflag? revisionflag="{revisionflag}"}}><title>{title}</title><para>
+{title%}<para{id? id="{id}"}{revisionflag? revisionflag="{revisionflag}"}>
+|
+{title%}</para>
+{title#}</para></formalpara>
+{empty}
+
+
+# Define a special table for left-centre-right lines, filling the whole page
+# width, with a border but no separators, for Exim configuration options. It
+# would be nice if this could call the default [table] template, forcing the
+# appropriate attributes, but I have not found a way of doing this.
+
+[tabledef-conf]
+fillchar==
+format=csv
+template=conf-table
+colspec=<colspec align="{colalign}"/>
+bodyrow=<row>|</row>
+bodydata=<entry>|</entry>
+
+[conf-table]
+<{title?table}{title!informaltable}{id? id="{id}"} pgwide="1" frame="all" colsep="0" rowsep="0">
+<title>{title}</title>
+<tgroup cols="{cols}">
+<colspec align="left" colwidth="8*"/>
+<colspec align="center" colwidth = "5*"/>
+<colspec align="center" colwidth = "5*"/>
+<colspec align="right" colwidth = "6*"/>
+{headrows#}<thead>
+{headrows}
+{headrows#}</thead>
+{footrows#}<tfoot>
+{footrows}
+{footrows#}</tfoot>
+<tbody>
+{bodyrows}
+</tbody>
+</tgroup>
+</{title?table}{title!informaltable}>
+
+# The default indexterm macro generates primary index entries for the
+# secondary and tertiary terms as well, which does not make sense
+# in the context of the way I write indexes. As well as a replacement
+# that does the simple, straightforward thing, we actually want to have
+# two different macros: one for concepts and one for options.
+
+[cindex-inlinemacro]
+# Inline index term for concepts.
+<indexterm role="concept">
+ <primary>{1}</primary>
+ <secondary>{2}</secondary>
+ <tertiary>{3}</tertiary>
+</indexterm>
+
+[oindex-inlinemacro]
+# Inline index term for options.
+<indexterm role="option">
+ <primary>{1}</primary>
+ <secondary>{2}</secondary>
+ <tertiary>{3}</tertiary>
+</indexterm>
+
+# Allow for the "role" attribute for an index.
+
+[sect-index]
+<index{id? id="{id}"}{role? role="{role}"}>
+<title>{title}</title>
+|
+</index>
+
+
+# Allow for the "titleabbrev" attribute for chapters.
+
+[sect1]
+<chapter{id? id="{id}"}>
+<title>{title}</title>
+<titleabbrev>{titleabbrev}</titleabbrev>
+|
+</chapter>
+
+
+#### End ####
diff --git a/doc/doc-docbook/MyStyle-chunk-html.xsl b/doc/doc-docbook/MyStyle-chunk-html.xsl
new file mode 100644
index 000000000..3a1cb91b2
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-chunk-html.xsl
@@ -0,0 +1,20 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-chunk-html.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<!-- This stylesheet driver imports the DocBook XML stylesheet for chunked
+HTML output, and then imports my common stylesheet for HTML output. Finally, it
+fiddles with the chunking parameters to arrange for chapter chunking only (no
+section chunking). -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<xsl:import href="/usr/share/sgml/docbook/xsl-stylesheets-1.66.1/xhtml/chunk.xsl"/>
+<xsl:import href="MyStyle-html.xsl"/>
+
+
+<!-- No section chunking; don't output the list of chunks -->
+
+<xsl:param name="chunk.section.depth" select="0"></xsl:param>
+<xsl:param name="chunk.quietly" select="1"/>
+
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle-filter-fo.xsl b/doc/doc-docbook/MyStyle-filter-fo.xsl
new file mode 100644
index 000000000..33a67336b
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-filter-fo.xsl
@@ -0,0 +1,55 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-filter-fo.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<!-- This stylesheet driver imports the DocBook XML stylesheet for FO output,
+and then imports my common stylesheet that makes changes that are wanted for
+all forms of output. Then it imports my FO stylesheet that contains changes for
+all printed output. Finally, there are some changes that apply only when
+printing the filter document. -->
+
+<xsl:import href="/usr/share/sgml/docbook/xsl-stylesheets-1.66.1/fo/docbook.xsl"/>
+<xsl:import href="MyStyle.xsl"/>
+<xsl:import href="MyStyle-fo.xsl"/>
+
+<!-- For the filter document, we do not want a title page and verso, as it
+isn't really a "book", though we use the book XML style. It turns out that this
+can be fiddled simply by changing the text "Table of Contents" to the title of
+the document.
+
+However, it seems that we have to repeat here the language-specific changes
+that are also present in MyStyle.xsl, because this overrides rather than adds
+to the settings. -->
+
+<xsl:param name="local.l10n.xml" select="document('')"/>
+<l:i18n xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0">
+ <l:l10n language="en">
+
+ <l:gentext key="TableofContents" text="Exim&#x2019;s interfaces to mail filtering"/>
+
+ <!-- The default (as modified above) gives us "Chapter xxx" or "Section
+ xxx", with a capital letter at the start. So we have to make an more
+ complicated explicit change to give just the number. -->
+
+ <l:context name="xref-number">
+ <l:template name="chapter" text="%n"/>
+ <l:template name="sect1" text="%n"/>
+ <l:template name="sect2" text="%n"/>
+ <l:template name="section" text="%n"/>
+ </l:context>
+
+ <!-- I think that having a trailing dot after section numbers looks fussy,
+ whereas you need it after just the digits of a chapter number. In both
+ cases we want to get rid of the word "chapter" or "section". -->
+
+ <l:context name="title-numbered">
+ <l:template name="chapter" text="%n.&#160;%t"/>
+ <l:template name="sect1" text="%n&#160;%t"/>
+ <l:template name="sect2" text="%n&#160;%t"/>
+ <l:template name="section" text="%n&#160;%t"/>
+ </l:context>
+
+ </l:l10n>
+</l:i18n>
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle-fo.xsl b/doc/doc-docbook/MyStyle-fo.xsl
new file mode 100644
index 000000000..bd0dd314c
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-fo.xsl
@@ -0,0 +1,241 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-fo.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ xmlns:fo="http://www.w3.org/1999/XSL/Format"
+ version="1.0">
+
+<!-- This stylesheet driver contains changes that I want to apply to the
+printed output form of both the filter document and the main Exim
+specification. It is imported by MyStyle-filter-fo.xsl and MyStyle-spec-fo.xsl.
+-->
+
+<xsl:import href="MyTitleStyle.xsl"/>
+
+
+
+<!-- Set A4 paper, double sided -->
+
+<xsl:param name="paper.type" select="'A4'"></xsl:param>
+
+<!-- This currently causes errors
+<xsl:param name="double.sided" select="1"></xsl:param>
+-->
+
+<!-- Allow for typed index entries. The "role" setting works with DocBook
+version 4.2 or earlier. Later versions (which we are not currently using)
+need "type". -->
+
+<xsl:param name="index.on.type" select="1"></xsl:param>
+<xsl:param name="index.on.role" select="1"></xsl:param>
+
+
+<!-- The default uses short chapter titles in the TOC! I want them only for
+use in footer lines. So we have to modify this template. I changed
+"titleabbrev.markup" to "title.markup". While I'm here, I also made chapter
+entries print in bold. -->
+
+<xsl:template name="toc.line">
+ <xsl:variable name="id">
+ <xsl:call-template name="object.id"/>
+ </xsl:variable>
+
+ <xsl:variable name="label">
+ <xsl:apply-templates select="." mode="label.markup"/>
+ </xsl:variable>
+
+ <fo:block text-align-last="justify"
+ end-indent="{$toc.indent.width}pt"
+ last-line-end-indent="-{$toc.indent.width}pt">
+ <fo:inline keep-with-next.within-line="always">
+ <!-- Added lines for bold -->
+ <xsl:choose>
+ <xsl:when test="self::chapter">
+ <xsl:attribute name="font-weight">bold</xsl:attribute>
+ </xsl:when>
+ <xsl:when test="self::index">
+ <xsl:attribute name="font-weight">bold</xsl:attribute>
+ </xsl:when>
+ </xsl:choose>
+ <!-- .................. -->
+ <fo:basic-link internal-destination="{$id}">
+ <xsl:if test="$label != ''">
+ <xsl:copy-of select="$label"/>
+ <xsl:value-of select="$autotoc.label.separator"/>
+ </xsl:if>
+ <xsl:apply-templates select="." mode="title.markup"/>
+ </fo:basic-link>
+ </fo:inline>
+ <fo:inline keep-together.within-line="always">
+ <xsl:text> </xsl:text>
+ <fo:leader leader-pattern="dots"
+ leader-pattern-width="3pt"
+ leader-alignment="reference-area"
+ keep-with-next.within-line="always"/>
+ <xsl:text> </xsl:text>
+ <fo:basic-link internal-destination="{$id}">
+ <fo:page-number-citation ref-id="{$id}"/>
+ </fo:basic-link>
+ </fo:inline>
+ </fo:block>
+</xsl:template>
+
+
+
+
+
+
+
+<!--
+Adjust the sizes of the fonts for titles; the defaults are too gross.
+-->
+
+<!-- Level 1 is sect1 level -->
+
+<xsl:attribute-set name="section.title.level1.properties">
+ <xsl:attribute name="font-size">
+ <xsl:value-of select="$body.font.master * 1.2"></xsl:value-of>
+ <xsl:text>pt</xsl:text>
+ </xsl:attribute>
+</xsl:attribute-set>
+
+
+<!-- Fiddling with chapter titles is more messy -->
+
+<xsl:template match="title" mode="chapter.titlepage.recto.auto.mode">
+ <fo:block xmlns:fo="http://www.w3.org/1999/XSL/Format"
+ xsl:use-attribute-sets="chapter.titlepage.recto.style"
+ margin-left="{$title.margin.left}"
+ font-size="17pt"
+ font-weight="bold"
+ font-family="{$title.font.family}">
+ <xsl:call-template name="component.title">
+ <xsl:with-param name="node" select="ancestor-or-self::chapter[1]"/>
+ </xsl:call-template>
+ </fo:block>
+</xsl:template>
+
+<xsl:template match="title" mode="chapter.titlepage.verso.auto.mode">
+ <fo:block xmlns:fo="http://www.w3.org/1999/XSL/Format"
+ xsl:use-attribute-sets="chapter.titlepage.recto.style"
+ margin-left="{$title.margin.left}"
+ font-size="17pt"
+ font-weight="bold"
+ font-family="{$title.font.family}">
+ <xsl:call-template name="component.title">
+ <xsl:with-param name="node" select="ancestor-or-self::chapter[1]"/>
+ </xsl:call-template>
+ </fo:block>
+</xsl:template>
+
+
+<!-- This provides a hard pagebreak mechanism as a get-out -->
+
+<xsl:template match="processing-instruction('hard-pagebreak')">
+ <fo:block xmlns:fo="http://www.w3.org/1999/XSL/Format" break-before='page'>
+ </fo:block>
+</xsl:template>
+
+
+<!-- Sort out the footer. Useful information is available at
+http://www.sagehill.net/docbookxsl/PrintHeaders.html
+-->
+
+
+<xsl:attribute-set name="footer.content.properties">
+ <!-- <xsl:attribute name="font-family">serif</xsl:attribute> -->
+ <!-- <xsl:attribute name="font-size">9pt</xsl:attribute> -->
+ <xsl:attribute name="font-style">italic</xsl:attribute>
+</xsl:attribute-set>
+
+
+
+
+<!-- Things that can be inserted into the footer are:
+
+<fo:page-number/>
+Inserts the current page number.
+
+<xsl:apply-templates select="." mode="title.markup"/>
+Inserts the title of the current chapter, appendix, or other component.
+
+<xsl:apply-templates select="." mode="titleabbrev.markup"/>
+Inserts the titleabbrev of the current chapter, appendix, or other component,
+if it is available. Otherwise it inserts the regular title.
+
+<xsl:apply-templates select="." mode="object.title.markup"/>
+Inserts the chapter title with chapter number label. Likewise for appendices.
+
+<fo:retrieve-marker ... /> Used to retrieve the current section name.
+
+<xsl:apply-templates select="//corpauthor[1]"/>
+Inserts the value of the first corpauthor element found anywhere in the
+document.
+
+<xsl:call-template name="datetime.format">
+ <xsl:with-param ...
+Inserts a date timestamp.
+
+<xsl:call-template name="draft.text"/>
+Inserts the Draft message if draft.mode is currently on.
+
+<fo:external-graphic ... />
+Inserts a graphical image.
+See the section Graphic in header or footer for details.
+-->
+
+
+<xsl:template name="footer.content">
+ <xsl:param name="pageclass" select="''"/>
+ <xsl:param name="sequence" select="''"/>
+ <xsl:param name="position" select="''"/>
+ <xsl:param name="gentext-key" select="''"/>
+
+ <fo:block>
+ <!-- pageclass can be front, body, back -->
+ <!-- sequence can be odd, even, first, blank -->
+ <!-- position can be left, center, right -->
+ <xsl:choose>
+ <xsl:when test="$pageclass = 'titlepage'">
+ <!-- nop; no footer on title pages -->
+ </xsl:when>
+
+ <xsl:when test="$double.sided != 0 and $sequence = 'even'
+ and $position='left'">
+ <fo:page-number/>
+ </xsl:when>
+
+ <xsl:when test="$double.sided != 0 and ($sequence = 'odd' or $sequence = 'first')
+ and $position='right'">
+ <fo:page-number/>
+ </xsl:when>
+
+ <xsl:when test="$double.sided = 0 and $position='center'">
+ <fo:page-number/>
+ </xsl:when>
+
+ <xsl:when test="$double.sided = 0 and $position='right'">
+ <xsl:apply-templates select="." mode="titleabbrev.markup"/>
+ </xsl:when>
+
+ <xsl:when test="$sequence='blank'">
+ <xsl:choose>
+ <xsl:when test="$double.sided != 0 and $position = 'left'">
+ <fo:page-number/>
+ </xsl:when>
+ <xsl:when test="$double.sided = 0 and $position = 'center'">
+ <fo:page-number/>
+ </xsl:when>
+ <xsl:otherwise>
+ <!-- nop -->
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:when>
+
+ <xsl:otherwise>
+ <!-- nop -->
+ </xsl:otherwise>
+ </xsl:choose>
+ </fo:block>
+</xsl:template>
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle-html.xsl b/doc/doc-docbook/MyStyle-html.xsl
new file mode 100644
index 000000000..e0b7537f3
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-html.xsl
@@ -0,0 +1,171 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-html.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<!-- This stylesheet driver imports my common stylesheet that makes some
+changes that are wanted for all forms of output. Then it makes changes that are
+specific to HTML output. -->
+
+<xsl:import href="MyStyle.xsl"/>
+
+<xsl:param name="shade.verbatim" select="1"></xsl:param>
+
+<xsl:attribute-set name="shade.verbatim.style">
+ <xsl:attribute name="bgcolor">#F0F0E0</xsl:attribute>
+ <xsl:attribute name="width">100%</xsl:attribute>
+ <xsl:attribute name="cellpadding">2</xsl:attribute>
+ <xsl:attribute name="border">0</xsl:attribute>
+</xsl:attribute-set>
+
+<!-- This is how you can make use of a CSS stylesheet, but at present I'm
+not doing so. -->
+
+<!--
+<xsl:param name="html.stylesheet" select="'Myhtml.css'"/>
+-->
+
+
+<!-- This removes the title of the current page from the top of the page -
+redundant because each page is a chapter, whose title shows just below. It also
+removes the titles of the next/prev at the bottom of the page, but I don't
+think that matters too much. -->
+
+<xsl:param name="navig.showtitles" select="'0'"/>
+
+
+<!-- This allows for the setting of RevisionFlag on elements. -->
+
+<xsl:param name="show.revisionflag" select="'1'"/>
+
+<xsl:template name="system.head.content">
+<style type="text/css">
+<xsl:text>
+div.added { background-color: #ffff99; }
+div.deleted { text-decoration: line-through;
+ background-color: #FF7F7F; }
+div.changed { background-color: #99ff99; }
+div.off { }
+
+span.added { background-color: #ffff99; }
+span.deleted { text-decoration: line-through;
+ background-color: #FF7F7F; }
+span.changed { background-color: #99ff99; }
+span.off { }
+</xsl:text>
+</style>
+</xsl:template>
+
+<xsl:template match="*[@revisionflag]">
+ <xsl:choose>
+ <xsl:when test="local-name(.) = 'para' or local-name(.) = 'simpara' or local-name(.) = 'formalpara' or local-name(.) = 'section' or local-name(.) = 'sect1' or local-name(.) = 'sect2' or local-name(.) = 'sect3' or local-name(.) = 'sect4' or local-name(.) = 'sect5' or local-name(.) = 'chapter' or local-name(.) = 'preface' or local-name(.) = 'itemizedlist' or local-name(.) = 'varlistentry' or local-name(.) = 'glossary' or local-name(.) = 'bibliography' or local-name(.) = 'index' or local-name(.) = 'appendix'">
+ <div class="{@revisionflag}">
+ <xsl:apply-imports/>
+ </div>
+ </xsl:when>
+ <xsl:when test="local-name(.) = 'phrase' or local-name(.) = 'ulink' or local-name(.) = 'link' or local-name(.) = 'filename' or local-name(.) = 'literal' or local-name(.) = 'member' or local-name(.) = 'glossterm' or local-name(.) = 'sgmltag' or local-name(.) = 'quote' or local-name(.) = 'emphasis' or local-name(.) = 'command' or local-name(.) = 'xref'">
+ <span class="{@revisionflag}">
+ <xsl:apply-imports/>
+ </span>
+ </xsl:when>
+ <xsl:when test="local-name(.) = 'listitem' or local-name(.) = 'entry' or local-name(.) = 'title'">
+ <!-- nop; these are handled directly in the stylesheet -->
+ <xsl:apply-imports/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:message>
+ <xsl:text>Revisionflag on unexpected element: </xsl:text>
+ <xsl:value-of select="local-name(.)"/>
+ <xsl:text> (Assuming block)</xsl:text>
+ </xsl:message>
+ <div class="{@revisionflag}">
+ <xsl:apply-imports/>
+ </div>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+
+<!-- The default uses short chapter titles in the TOC! I want them only for
+use in footer lines in printed output. So we have to modify this template. I
+changed "titleabbrev.markup" to "title.markup". -->
+
+<xsl:template name="toc.line">
+ <xsl:param name="toc-context" select="."/>
+ <xsl:param name="depth" select="1"/>
+ <xsl:param name="depth.from.context" select="8"/>
+
+ <span>
+ <xsl:attribute name="class"><xsl:value-of select="local-name(.)"/></xsl:attribute>
+ <a>
+ <xsl:attribute name="href">
+ <xsl:call-template name="href.target">
+ <xsl:with-param name="context" select="$toc-context"/>
+ </xsl:call-template>
+ </xsl:attribute>
+
+ <xsl:variable name="label">
+ <xsl:apply-templates select="." mode="label.markup"/>
+ </xsl:variable>
+ <xsl:copy-of select="$label"/>
+ <xsl:if test="$label != ''">
+ <xsl:value-of select="$autotoc.label.separator"/>
+ </xsl:if>
+
+ <xsl:apply-templates select="." mode="title.markup"/>
+ </a>
+ </span>
+</xsl:template>
+
+
+<!-- The default stylesheets generate both chapters and sections with <h2>
+headings in the HTML. The argument is that the HTML headings don't go deep
+enough to match the DocBook levels. But surely it would be better to stop them
+at the bottom end? Anyway, the Exim documents have only one level of section
+within chapters, and even if they went to two, it wouldn't exhaust HTML's
+capabilities. So I have copied the style stuff here, making a 1-character
+change from "+ 1" to "+ 2" in roughly the middle. -->
+
+<xsl:template name="section.heading">
+ <xsl:param name="section" select="."/>
+ <xsl:param name="level" select="1"/>
+ <xsl:param name="allow-anchors" select="1"/>
+ <xsl:param name="title"/>
+ <xsl:param name="class" select="'title'"/>
+
+ <xsl:variable name="id">
+ <xsl:choose>
+ <!-- if title is in an *info wrapper, get the grandparent -->
+ <xsl:when test="contains(local-name(..), 'info')">
+ <xsl:call-template name="object.id">
+ <xsl:with-param name="object" select="../.."/>
+ </xsl:call-template>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:call-template name="object.id">
+ <xsl:with-param name="object" select=".."/>
+ </xsl:call-template>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:variable>
+
+ <!-- HTML H level is two higher than section level -->
+ <xsl:variable name="hlevel" select="$level + 2"/>
+ <xsl:element name="h{$hlevel}">
+ <xsl:attribute name="class"><xsl:value-of select="$class"/></xsl:attribute>
+ <xsl:if test="$css.decoration != '0'">
+ <xsl:if test="$hlevel&lt;3">
+ <xsl:attribute name="style">clear: both</xsl:attribute>
+ </xsl:if>
+ </xsl:if>
+ <xsl:if test="$allow-anchors != 0">
+ <xsl:call-template name="anchor">
+ <xsl:with-param name="node" select="$section"/>
+ <xsl:with-param name="conditional" select="0"/>
+ </xsl:call-template>
+ </xsl:if>
+ <xsl:copy-of select="$title"/>
+ </xsl:element>
+</xsl:template>
+
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle-nochunk-html.xsl b/doc/doc-docbook/MyStyle-nochunk-html.xsl
new file mode 100644
index 000000000..d067173a3
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-nochunk-html.xsl
@@ -0,0 +1,11 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-nochunk-html.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<!-- This stylesheet driver imports the DocBook XML stylesheet for unchunked
+HTML output, and then imports my common stylesheet for HTML output. -->
+
+<xsl:import href="/usr/share/sgml/docbook/xsl-stylesheets-1.66.1/xhtml/docbook.xsl"/>
+<xsl:import href="MyStyle-html.xsl"/>
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle-spec-fo.xsl b/doc/doc-docbook/MyStyle-spec-fo.xsl
new file mode 100644
index 000000000..ead674c7c
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-spec-fo.xsl
@@ -0,0 +1,17 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-spec-fo.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<!-- This stylesheet driver imports the DocBook XML stylesheet for FO output,
+and then imports my common stylesheet that makes changes that are wanted for
+all forms of output. Then it imports my FO stylesheet that contains changes for
+all printed output. Finally, there are some changes that apply only when
+printing the Exim specification document. -->
+
+<xsl:import href="/usr/share/sgml/docbook/xsl-stylesheets-1.66.1/fo/docbook.xsl"/>
+<xsl:import href="MyStyle.xsl"/>
+<xsl:import href="MyStyle-fo.xsl"/>
+
+<!-- Nothing special for the full spec document yet -->
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle-txt-html.xsl b/doc/doc-docbook/MyStyle-txt-html.xsl
new file mode 100644
index 000000000..7ec02ec5c
--- /dev/null
+++ b/doc/doc-docbook/MyStyle-txt-html.xsl
@@ -0,0 +1,23 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle-txt-html.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<!-- This stylesheet driver imports the DocBook XML stylesheet for unchunked
+HTML output, and then imports my common stylesheet for HTML output. Then it
+adds an instruction to use "(c)" for copyright rather than the Unicode
+character. -->
+
+<xsl:import href="/usr/share/sgml/docbook/xsl-stylesheets-1.66.1/xhtml/docbook.xsl"/>
+<xsl:import href="MyStyle-html.xsl"/>
+
+<xsl:template name="dingbat.characters">
+ <xsl:param name="dingbat">bullet</xsl:param>
+ <xsl:choose>
+ <xsl:when test="$dingbat='copyright'">(c)</xsl:when>
+ <xsl:otherwise>
+ <xsl:text>?</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyStyle.xsl b/doc/doc-docbook/MyStyle.xsl
new file mode 100644
index 000000000..a3e05cccb
--- /dev/null
+++ b/doc/doc-docbook/MyStyle.xsl
@@ -0,0 +1,202 @@
+<!-- $Cambridge: exim/doc/doc-docbook/MyStyle.xsl,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
+
+<!-- This file contains changes to the Docbook XML stylesheets that I want to
+have happen in all forms of output. It is imported by all the drivers. -->
+
+
+<!-- Set body font size -->
+
+<xsl:param name="body.font.master">11</xsl:param>
+
+<!-- Set no relative indent for titles and body -->
+
+<xsl:param name="title.margin.left">0pt</xsl:param>
+
+
+<!-- This removes the dot at the end of run-in titles, which we use
+for formal paragraphs for command line options. -->
+
+<xsl:param name="runinhead.default.title.end.punct" select="' '"></xsl:param>
+
+
+<!-- Without this setting, variable lists get misformatted in the FO case,
+causing overprinting. Maybe with a later release of fop the need to do this
+might go away. -->
+
+<xsl:param name="variablelist.as.blocks" select="1"></xsl:param>
+
+
+<!--
+Cause sections to be numbered, and to include the outer component number.
+-->
+
+<xsl:param name="section.autolabel">1</xsl:param>
+<xsl:param name="section.label.includes.component.label">1</xsl:param>
+
+
+<!--
+Specify TOCs only for top-level things. No TOCs for components (e.g. chapters)
+-->
+
+<xsl:param name="generate.toc">
+article toc,title
+book toc,title
+</xsl:param>
+
+
+<!-- Turn off the poor hyphenation -->
+
+<xsl:param name="hyphenate">false</xsl:param>
+
+
+<!--
+Generate only numbers, no titles, in cross references.
+-->
+
+<xsl:param name="xref.with.number.and.title">0</xsl:param>
+
+
+<!-- Hopefully this might do something useful? It doesn't seem to. -->
+
+<xsl:param name="fop.extensions" select="1"></xsl:param>
+
+
+<!-- Output variable names in italic rather than the default monospace. -->
+
+<xsl:template match="varname">
+ <xsl:call-template name="inline.italicseq"/>
+</xsl:template>
+
+
+<!-- Output file names in italic rather than the default monospace. -->
+
+<xsl:template match="filename">
+ <xsl:call-template name="inline.italicseq"/>
+</xsl:template>
+
+
+<!-- Output options in bold rather than the default monospace. -->
+
+<xsl:template match="option">
+ <xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+
+<!--
+Make a number of more detailed changes to the style that involve more than just
+fiddling with a parameter.
+-->
+
+<xsl:param name="local.l10n.xml" select="document('')"/>
+<l:i18n xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0">
+ <l:l10n language="en">
+
+ <!-- The default (as modified above) gives us "Chapter xxx" or "Section
+ xxx", with a capital letter at the start. So we have to make an more
+ complicated explicit change to give just the number. -->
+
+ <l:context name="xref-number">
+ <l:template name="chapter" text="%n"/>
+ <l:template name="sect1" text="%n"/>
+ <l:template name="sect2" text="%n"/>
+ <l:template name="section" text="%n"/>
+ </l:context>
+
+ <!-- I think that having a trailing dot after section numbers looks fussy,
+ whereas you need it after just the digits of a chapter number. In both
+ cases we want to get rid of the word "chapter" or "section". -->
+
+ <l:context name="title-numbered">
+ <l:template name="chapter" text="%n.&#160;%t"/>
+ <l:template name="sect1" text="%n&#160;%t"/>
+ <l:template name="sect2" text="%n&#160;%t"/>
+ <l:template name="section" text="%n&#160;%t"/>
+ </l:context>
+
+ </l:l10n>
+</l:i18n>
+
+
+<!-- The default has far too much space on either side of displays and lists -->
+
+<xsl:attribute-set name="verbatim.properties">
+ <xsl:attribute name="space-before.minimum">0em</xsl:attribute>
+ <xsl:attribute name="space-before.optimum">0em</xsl:attribute>
+ <xsl:attribute name="space-before.maximum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.minimum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.optimum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.maximum">0em</xsl:attribute>
+ <xsl:attribute name="start-indent">0.3in</xsl:attribute>
+</xsl:attribute-set>
+
+<xsl:attribute-set name="list.block.spacing">
+ <xsl:attribute name="space-before.optimum">0em</xsl:attribute>
+ <xsl:attribute name="space-before.minimum">0em</xsl:attribute>
+ <xsl:attribute name="space-before.maximum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.optimum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.minimum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.maximum">0em</xsl:attribute>
+</xsl:attribute-set>
+
+<!-- List item spacing -->
+
+<xsl:attribute-set name="list.item.spacing">
+ <xsl:attribute name="space-before.optimum">0.8em</xsl:attribute>
+ <xsl:attribute name="space-before.minimum">0.8em</xsl:attribute>
+ <xsl:attribute name="space-before.maximum">1em</xsl:attribute>
+</xsl:attribute-set>
+
+<!-- Reduce the space after informal tables -->
+
+<xsl:attribute-set name="informal.object.properties">
+ <xsl:attribute name="space-before.minimum">1em</xsl:attribute>
+ <xsl:attribute name="space-before.optimum">1em</xsl:attribute>
+ <xsl:attribute name="space-before.maximum">2em</xsl:attribute>
+ <xsl:attribute name="space-after.minimum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.optimum">0em</xsl:attribute>
+ <xsl:attribute name="space-after.maximum">0em</xsl:attribute>
+</xsl:attribute-set>
+
+<!-- Reduce the space after section titles. 0 is not small enough. -->
+
+<xsl:attribute-set name="section.title.level1.properties">
+ <xsl:attribute name="space-after.minimum">-6pt</xsl:attribute>
+ <xsl:attribute name="space-after.optimum">-4pt</xsl:attribute>
+ <xsl:attribute name="space-after.maximum">0pt</xsl:attribute>
+</xsl:attribute-set>
+
+<!-- Slightly reduce the space before paragraphs -->
+
+<xsl:attribute-set name="normal.para.spacing">
+ <xsl:attribute name="space-before.optimum">0.8em</xsl:attribute>
+ <xsl:attribute name="space-before.minimum">0.8em</xsl:attribute>
+ <xsl:attribute name="space-before.maximum">1.0em</xsl:attribute>
+</xsl:attribute-set>
+
+
+<xsl:attribute-set name="table.cell.padding">
+ <xsl:attribute name="padding-left">2pt</xsl:attribute>
+ <xsl:attribute name="padding-right">2pt</xsl:attribute>
+ <xsl:attribute name="padding-top">0pt</xsl:attribute>
+ <xsl:attribute name="padding-bottom">0pt</xsl:attribute>
+</xsl:attribute-set>
+
+
+
+<!-- Turn off page header rule -->
+<xsl:param name="header.rule" select="0"></xsl:param>
+
+<!-- Remove page header content -->
+<xsl:template name="header.content"/>
+
+<!-- Remove space for page header -->
+<xsl:param name="body.margin.top" select="'0in'"></xsl:param>
+<xsl:param name="region.before.extent" select="'0in'"></xsl:param>
+
+<!-- Turn off page footer rule -->
+<xsl:param name="footer.rule" select="0"></xsl:param>
+
+
+</xsl:stylesheet>
diff --git a/doc/doc-docbook/MyTitlepage.templates.xml b/doc/doc-docbook/MyTitlepage.templates.xml
new file mode 100644
index 000000000..27c4c8a63
--- /dev/null
+++ b/doc/doc-docbook/MyTitlepage.templates.xml
@@ -0,0 +1,101 @@
+<!DOCTYPE t:templates [
+<!ENTITY hsize0 "10pt">
+<!ENTITY hsize1 "12pt">
+<!ENTITY hsize2 "14.4pt">
+<!ENTITY hsize3 "17.28pt">
+<!ENTITY hsize4 "20.736pt">
+<!ENTITY hsize5 "24.8832pt">
+<!ENTITY hsize0space "7.5pt"> <!-- 0.75 * hsize0 -->
+<!ENTITY hsize1space "9pt"> <!-- 0.75 * hsize1 -->
+<!ENTITY hsize2space "10.8pt"> <!-- 0.75 * hsize2 -->
+<!ENTITY hsize3space "12.96pt"> <!-- 0.75 * hsize3 -->
+<!ENTITY hsize4space "15.552pt"> <!-- 0.75 * hsize4 -->
+<!ENTITY hsize5space "18.6624pt"> <!-- 0.75 * hsize5 -->
+]>
+
+<!-- $Cambridge: exim/doc/doc-docbook/MyTitlepage.templates.xml,v 1.1 2005/06/16 10:32:31 ph10 Exp $ -->
+
+<!-- This document is copied from the DocBook XSL stylesheets, and modified to
+do what I want it to do for the Exim reference manual. Process this document
+with:
+
+xsltproc -output MyTitleStyle.xsl \
+ /usr/share/sgml/docbook/xsl-stylesheets-1.66.1/template/titlepage.xsl \
+ MyTitlepage.templates.xml
+
+in order to generate a style sheet called MyTitleStyle.xsl. That is then
+included in my customization stylesheet. What a lot of heavyweight apparatus we
+need to set up! -->
+
+
+<t:templates xmlns:t="http://nwalsh.com/docbook/xsl/template/1.0"
+ xmlns:param="http://nwalsh.com/docbook/xsl/template/1.0/param"
+ xmlns:fo="http://www.w3.org/1999/XSL/Format"
+ xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
+
+<!-- ********************************************************************
+ $Id: titlepage.templates.xml,v 1.23 2003/12/16 00:30:49 bobstayton Exp $
+ ********************************************************************
+
+ This file is part of the DocBook XSL Stylesheet distribution.
+ See ../README or http://docbook.sf.net/ for copyright
+ and other information.
+
+ ******************************************************************** -->
+
+<!-- ==================================================================== -->
+
+ <t:titlepage t:element="book" t:wrapper="fo:block">
+ <t:titlepage-content t:side="recto">
+ <title
+ t:named-template="division.title"
+ param:node="ancestor-or-self::book[1]"
+ text-align="center"
+ font-size="&hsize5;"
+ space-before="&hsize5space;"
+ font-weight="bold"
+ font-family="{$title.fontset}"/>
+ <subtitle
+ text-align="center"
+ font-size="&hsize4;"
+ space-before="&hsize4space;"
+ font-family="{$title.fontset}"/>
+ <corpauthor font-size="&hsize3;"
+ keep-with-next="always"
+ space-before="2in"/>
+ <authorgroup space-before="2in"/>
+ <author font-size="&hsize3;"
+ space-before="&hsize2space;"
+ keep-with-next="always"/>
+ </t:titlepage-content>
+
+ <t:titlepage-content t:side="verso">
+ <title
+ t:named-template="book.verso.title"
+ font-size="&hsize2;"
+ font-weight="bold"
+ font-family="{$title.fontset}"/>
+ <corpauthor/>
+ <authorgroup t:named-template="verso.authorgroup"/>
+ <author/>
+ <othercredit/>
+ <pubdate space-before="1em"/>
+ <abstract/>
+ <copyright/>
+ <legalnotice font-size="8pt"/>
+ </t:titlepage-content>
+
+<!-- This change stops it putting a blank page after the verso -->
+ <t:titlepage-separator>
+<!-- <fo:block break-after="page"/> -->
+ </t:titlepage-separator>
+
+ <t:titlepage-before t:side="recto">
+ </t:titlepage-before>
+
+ <t:titlepage-before t:side="verso">
+ <fo:block break-after="page"/>
+ </t:titlepage-before>
+</t:titlepage>
+
+</t:templates>
diff --git a/doc/doc-docbook/Myhtml.css b/doc/doc-docbook/Myhtml.css
new file mode 100644
index 000000000..8a6981774
--- /dev/null
+++ b/doc/doc-docbook/Myhtml.css
@@ -0,0 +1,31 @@
+# $Cambridge: exim/doc/doc-docbook/Myhtml.css,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+.screen {
+ font-family: monospace;
+ font-size: 1em;
+ display: block;
+ padding: 10px;
+ border: 1px solid #bbb;
+ background-color: #eee;
+ color: #000;
+ overflow: auto;
+ border-radius: 2.5px;
+ -moz-border-radius: 2.5px;
+ margin: 0.5em 2em;
+
+}
+
+.programlisting {
+ font-family: monospace;
+ font-size: 1em;
+ display: block;
+ padding: 10px;
+ border: 1px solid #bbb;
+ background-color: #ddd;
+ color: #000;
+ overflow: auto;
+ border-radius: 2.5px;
+ -moz-border-radius: 2.5px;
+ margin: 0.5em 2em;
+}
+
diff --git a/doc/doc-docbook/Pre-xml b/doc/doc-docbook/Pre-xml
new file mode 100755
index 000000000..113e6f9d0
--- /dev/null
+++ b/doc/doc-docbook/Pre-xml
@@ -0,0 +1,173 @@
+#! /usr/bin/perl
+
+# $Cambridge: exim/doc/doc-docbook/Pre-xml,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Script to pre-process XML input before processing it for various purposes.
+# Options specify which transformations are to be done. Monospaced literal
+# layout blocks are never touched.
+
+# Changes:
+
+# -abstract: Remove the <abstract> element
+
+# -ascii: Replace &8230; (sic, no x) with ...
+# Replace &#x2019; by '
+# Replace &#x201C; by "
+# Replace &#x201D; by "
+# Replace &#x2013; by -
+# Replace &#x2020; by *
+# Replace &#x2021; by **
+# Replace &#x00a0; by a space
+# Replace &#169; by (c)
+# Put quotes round <literal> text
+# Put quotes round <quote> text
+
+# -bookinfo: Remove the <bookinfo> element from the file
+
+# -fi: Replace "fi" by &#xFB01; except when it is in an XML element, or
+# inside a <literal>.
+
+# -noindex Remove the XML to generate a Concept and an Options index.
+# -oneindex Ditto, but add XML to generate a single index.
+
+
+
+# The function that processes non-literal monospaced text
+
+sub process()
+{
+my($s) = $_[0];
+
+$s =~ s/fi(?![^<>]*>)/&#xFB01;/g if $ligatures;
+
+if ($ascii)
+ {
+ $s =~ s/&#8230;/.../g;
+ $s =~ s/&#x2019;/'/g;
+ $s =~ s/&#x201C;/"/g;
+ $s =~ s/&#x201D;/"/g;
+ $s =~ s/&#x2013;/-/g;
+ $s =~ s/&#x2020;/*/g;
+ $s =~ s/&#x2021;/**/g;
+ $s =~ s/&#x00a0;/ /g;
+ $s =~ s/&#x00a9;/(c)/g;
+ $s =~ s/<quote>/"/g;
+ $s =~ s/<\/quote>/"/g;
+ }
+
+$s;
+}
+
+
+# The main program
+
+$abstract = 0;
+$ascii = 0;
+$bookinfo = 0;
+$inliteral = 0;
+$ligatures = 0;
+$madeindex = 0;
+$noindex = 0;
+$oneindex = 0;
+
+foreach $arg (@ARGV)
+ {
+ if ($arg eq "-fi") { $ligatures = 1; }
+ elsif ($arg eq "-abstract") { $abstract = 1; }
+ elsif ($arg eq "-ascii") { $ascii = 1; }
+ elsif ($arg eq "-bookinfo") { $bookinfo = 1; }
+ elsif ($arg eq "-noindex") { $noindex = 1; }
+ elsif ($arg eq "-oneindex") { $oneindex = 1; }
+ else { die "** Pre-xml: Unknown option \"$arg\"\n"; }
+ }
+
+while (<STDIN>)
+ {
+ # Remove <abstract> if required
+
+ next if ($abstract && /^\s*<abstract>/);
+
+ # Remove <bookinfo> if required
+
+ if ($bookinfo && /^<bookinfo/)
+ {
+ while (<STDIN>) { last if /^<\/bookinfo/; }
+ next;
+ }
+
+ # Copy monospaced literallayout blocks
+
+ if (/^<literallayout class="monospaced">/)
+ {
+ print;
+ while (<STDIN>)
+ {
+ print;
+ last if /^<\/literallayout>/;
+ }
+ next;
+ }
+
+ # Adjust index-generation code if required
+
+ if (($noindex || $oneindex) && /^<index[\s>]/)
+ {
+ while (<STDIN>)
+ {
+ last if /^<\/index>/;
+ }
+
+ if ($oneindex && !$madeindex)
+ {
+ $madeindex = 1;
+ print "<index><title>Index</title></index>\n";
+ }
+
+ next;
+ }
+
+ # A line that is not in a monospaced literal block; keep track of which
+ # parts are in <literal> and which not. The latter get processed by the
+ # function above.
+
+ for (;;)
+ {
+ if ($inliteral)
+ {
+ if (/^(.*?)<\/literal>(.*)$/)
+ {
+ print $1;
+ print "\"" if $ascii;
+ print "</literal>";
+ $inliteral = 0;
+ $_ = "$2\n";
+ }
+ else
+ {
+ print;
+ last;
+ }
+ }
+
+ # Not in literal state
+
+ else
+ {
+ if (/^(.*?)<literal>(.*)$/)
+ {
+ print &process($1);
+ print "<literal>";
+ print "\"" if $ascii;
+ $inliteral = 1;
+ $_ = "$2\n";
+ }
+ else
+ {
+ print &process($_);
+ last;
+ }
+ }
+ } # Loop for different parts of one line
+ } # Loop for multiple lines
+
+# End
diff --git a/doc/doc-docbook/TidyHTML-filter b/doc/doc-docbook/TidyHTML-filter
new file mode 100755
index 000000000..f23a9a728
--- /dev/null
+++ b/doc/doc-docbook/TidyHTML-filter
@@ -0,0 +1,79 @@
+#! /usr/bin/perl
+
+# $Cambridge: exim/doc/doc-docbook/TidyHTML-filter,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Script to tidy up the filter HTML file that is generated by xmlto. The
+# following changes are made:
+#
+# 1. Split very long lines.
+# 2. Create reverse links from chapter and section titles back to the TOC.
+
+
+$tocref = 1;
+
+# Read in the filter.html file.
+
+open(IN, "filter.html") || die "Failed to open filter.html for reading: $!\n";
+@text = <IN>;
+close(IN);
+
+# Insert a newline after every > because the whole toc is generated as one
+# humungous line that is hard to check. Then split the lines so that each one
+# is a separate element in the vector.
+
+foreach $line (@text) { $line =~ s/>\s*/>\n/g; }
+for ($i = 0; $i < scalar(@text); $i++)
+ { splice @text, $i, 1, (split /(?<=\n)/, $text[$i]); }
+
+# We want to create reverse links from each chapter and section title back to
+# the relevant place in the TOC. Scan the TOC for the relevant entries. Add
+# an id to each entry, and create tables that remember the new link ids. We
+# detect the start of the TOC by <div class="toc" and the end of the TOC by
+# <div class="chapter".
+
+# Skip to start of TOC
+
+for ($i = 0; $i < scalar(@text); $i++)
+ {
+ last if $text[$i] =~ /^<div class="toc"/;
+ }
+
+# Scan the TOC
+
+for (; $i < scalar(@text); $i++)
+ {
+ last if $text[$i] =~ /^<div class="chapter"/;
+ if ($text[$i] =~ /^<a href="(#[^"]+)">/)
+ {
+ my($ss) = $1;
+ my($id) = sprintf "%04d", $tocref++;
+ $text[$i] =~ s/<a/<a id="toc$id"/;
+ $backref{"$ss"} = "toc$id";
+ }
+ }
+
+# Scan remainder of the document
+
+for (; $i < scalar(@text); $i++)
+ {
+ if ($text[$i] =~ /^<h[23] /)
+ {
+ $i++;
+ if ($text[$i] =~ /^<a( xmlns="[^"]+")? id="([^"]+)">$/)
+ {
+ my($ref) = $backref{"#$2"};
+ $text[$i++] = "<a$1 href=\"#$ref\" id=\"$2\">\n";
+ my($temp) = $text[$i];
+ $text[$i] = $text[$i+1];
+ $text[++$i] = $temp;
+ }
+ }
+ }
+
+# Write out the revised file
+
+open(OUT, ">filter.html") || die "Failed to open filter.html for writing: $!\n";
+print OUT @text;
+close(OUT);
+
+# End
diff --git a/doc/doc-docbook/TidyHTML-spec b/doc/doc-docbook/TidyHTML-spec
new file mode 100755
index 000000000..8459bcf17
--- /dev/null
+++ b/doc/doc-docbook/TidyHTML-spec
@@ -0,0 +1,139 @@
+#! /usr/bin/perl
+
+# $Cambridge: exim/doc/doc-docbook/TidyHTML-spec,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Script to tidy up the spec HTML files that are generated by xmlto. The
+# following changes are made:
+#
+# 1. Tidy the index.html file by splitting the very long lines.
+# 2. Create reverse links from chapter and section titles back to the TOC.
+# 3. Tidy the ix01.html file - the actual index - by splitting long lines.
+# 4. Insert links from the letter divisions to the top of the Index.
+
+chdir "spec.html";
+
+$tocref = 1;
+
+# Read in the index.html file. It's really the TOC.
+
+open(IN, "index.html") || die "Failed to open index.html for reading: $!\n";
+@toc = <IN>;
+close(IN);
+
+# Insert a newline after every > because the whole toc is generated as one
+# humungous line that is hard to check. Then split the lines so that each one
+# is a separate element in the vector.
+
+foreach $line (@toc) { $line =~ s/>\s*/>\n/g; }
+for ($i = 0; $i < scalar(@toc); $i++)
+ { splice @toc, $i, 1, (split /(?<=\n)/, $toc[$i]); }
+
+# We want to create reverse links from each chapter and section title back to
+# the relevant place in the TOC. Scan the TOC for the relevant entries. Add
+# an id to each entry, and create tables that remember the file names and the
+# new link ids.
+
+foreach $line (@toc)
+ {
+ if ($line =~ /^<a href="((?:ch|ix)\d+\.html)(#[^"]+)?">/)
+ {
+ my($chix) = $1;
+ my($ss) = $2;
+ my($id) = sprintf "%04d", $tocref++;
+ $line =~ s/<a/<a id="toc$id"/;
+ $backref{"$chix$ss"} = "toc$id";
+ push @chlist, $chix;
+ }
+ }
+
+# Write out the modified index.html file.
+
+open (OUT, ">index.html") || die "Failed to open index.html for writing: $!\n";
+print OUT @toc;
+close(OUT);
+
+# Now scan each of the other page files and insert the reverse links.
+
+foreach $file (@chlist)
+ {
+ open(IN, "$file") || die "Failed to open $file for reading: $!\n";
+ @text = <IN>;
+ close(IN);
+
+ foreach $line (@text)
+ {
+ if ($line =~ /^(.*?)<a( xmlns="[^"]+")? id="([^"]+)"><\/a>(.+?)<\/h(.*)$/)
+ {
+ my($pre, $opt, $id, $title, $post) = ($1, $2, $3, $4, $5);
+
+ # Section reference
+ my($ref) = $backref{"$file#$id"};
+
+ # If not found, try for a chapter reference
+ $ref = $backref{"$file"} if !defined $ref;
+
+ # Adjust the line
+ $line = "$pre<a$opt href=\"index.html#$ref\" id=\"$id\">$title</a></h$post";
+ }
+ }
+
+ open(OUT, ">$file") || die "Failed to open $file for writing: $!\n";
+ print OUT @text;
+ close(OUT);
+ }
+
+# Now process the ix01.html file
+
+open(IN, "ix01.html") || die "Failed to open ix01.html for reading: $!\n";
+@index = <IN>;
+close(IN);
+
+# Insert a newline after every > because the whole index is generated as one
+# humungous line that is hard to check. Then split the lines so that each one
+# is a separate element in the vector.
+
+foreach $line (@index) { $line =~ s/>\s*/>\n/g; }
+for ($i = 0; $i < scalar(@index); $i++)
+ { splice @index, $i, 1, (split /(?<=\n)/, $index[$i]); }
+
+# We want to add a list of letters at the top of the index, and link back
+# to them from each letter heading. First find the index title and remember
+# where to insert the list of letters.
+
+for ($i = 0; $i < scalar(@index); $i++)
+ {
+ if ($index[$i] =~ /^<\/h2>$/)
+ {
+ $listindex = $i;
+ last;
+ }
+ }
+
+# Now scan through for the letter headings and build the cross references,
+# while also building up the list to insert.
+
+$list = "<h4>\n";
+for (; $i < scalar(@index); $i++)
+ {
+ if ($index[$i] =~ /^(.)<\/h3>$/)
+ {
+ $letter = $1;
+ $index[$i-1] =~ s/^/<a id="${letter}B" href="#${letter}T">/;
+ $index[$i] =~ s/$/<\/a>/;
+ $list .= "<a id=\"${letter}T\" href=\"#${letter}B\"> $letter</a>\n";
+ }
+ }
+
+# Now we know which letters we have, we can insert the list.
+
+$list .= "</h4>\n";
+splice @index, $listindex, 0, $list;
+
+# Write out the modified index.html file.
+
+open (OUT, ">ix01.html") || die "Failed to open ix01.html for writing: $!\n";
+print OUT @index;
+close(OUT);
+
+
+# End
diff --git a/doc/doc-docbook/Tidytxt b/doc/doc-docbook/Tidytxt
new file mode 100755
index 000000000..02bf9dbd4
--- /dev/null
+++ b/doc/doc-docbook/Tidytxt
@@ -0,0 +1,21 @@
+#! /usr/bin/perl
+
+# $Cambridge: exim/doc/doc-docbook/Tidytxt,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Script to tidy up the output of w3m when it makes a text file. We convert
+# sequences of blank lines into a single blank line.
+
+$blanks = 0;
+while (<>)
+ {
+ if (/^\s*$/)
+ {
+ $blanks++;
+ next;
+ }
+ print "\n" if $blanks > 0;
+ $blanks = 0;
+ print;
+ }
+
+# End
diff --git a/doc/doc-docbook/filter.ascd b/doc/doc-docbook/filter.ascd
new file mode 100644
index 000000000..8fd9c7e3c
--- /dev/null
+++ b/doc/doc-docbook/filter.ascd
@@ -0,0 +1,1759 @@
+///
+$Cambridge: exim/doc/doc-docbook/filter.ascd,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+This file contains the Asciidoc source for the document that describes Exim's
+filtering facilities from a user's point of view. See the file AdMarkup.txt for
+an explanation of the markup that is used. It is more or less standard
+Asciidoc, but with a few changes and additions.
+///
+
+
+///
+This preliminary stuff creates a <bookinfo> entry in the XML. This is removed
+when creating the PostScript/PDF output, because we do not want a full-blown
+title page created for those versions. The stylesheet fudges up a title line to
+replace the text "Table of contents". However, for the other forms of output,
+the <bookinfo> element is retained and used.
+///
+
+Exim's interfaces to mail filtering
+===================================
+:author: Philip Hazel
+:copyright: University of Cambridge
+:cpyear: 2005
+:date: 13 May 2005
+:doctitleabbrev: Exim filtering
+:revision: 4.50
+
+
+//////////////////////////////////////////////////////////////////////////////
+***WARNING*** Do not put anything, not even a titleabbrev setting, before
+the first chapter (luckily it does not need one) because if you do, AsciiDoc
+creates an empty <preface> element, which we do not want.
+//////////////////////////////////////////////////////////////////////////////
+
+
+Forwarding and filtering in Exim
+--------------------------------
+
+This document describes the user interfaces to Exim's in-built mail filtering
+facilities, and is copyright (C) University of Cambridge 2005. It corresponds
+to Exim version 4.50.
+
+
+
+Introduction
+~~~~~~~~~~~~
+Most Unix mail transfer agents (programs that deliver mail) permit individual
+users to specify automatic forwarding of their mail, usually by placing a list
+of forwarding addresses in a file called '.forward' in their home directories.
+Exim extends this facility by allowing the forwarding instructions to be a set
+of rules rather than just a list of addresses, in effect providing ``'.forward'
+with conditions''. Operating the set of rules is called 'filtering', and the
+file that contains them is called a 'filter file'.
+
+Exim supports two different kinds of filter file. An 'Exim filter' contains
+instructions in a format that is unique to Exim. A 'Sieve filter' contains
+instructions in the Sieve format that is defined by RFC 3028. As this is a
+standard format, Sieve filter files may already be familiar to some users.
+Sieve files should also be portable between different environments. However,
+the Exim filtering facility contains more features (such as variable
+expansion), and better integration with the host environment (such as the use
+of external processes and pipes).
+
+The choice of which kind of filter to use can be left to the end-user, provided
+that the system administrator has configured Exim appropriately for both kinds
+of filter. However, if interoperability is important, Sieve is the only
+choice.
+
+The ability to use filtering or traditional forwarding has to be enabled by the
+system administrator, and some of the individual facilities can be separately
+enabled or disabled. A local document should be provided to describe exactly
+what has been enabled. In the absence of this, consult your system
+administrator.
+
+This document describes how to use a filter file and the format of its
+contents. It is intended for use by end-users. Both Sieve filters and Exim
+filters are covered. However, for Sieve filters, only issues that relate to the
+Exim implementation are discussed, since Sieve itself is described elsewhere.
+
+The contents of traditional '.forward' files are not described here. They
+normally contain just a list of addresses, file names, or pipe commands,
+separated by commas or newlines, but other types of item are also available.
+The full details can be found in the chapter on the ^redirect^ router in the
+Exim specification, which also describes how the system administrator can set
+up and control the use of filtering.
+
+
+
+Filter operation
+~~~~~~~~~~~~~~~~
+It is important to realize that, in Exim, no deliveries are actually made while
+a filter or traditional '.forward' file is being processed. Running a filter
+or processing a traditional '.forward' file sets up future delivery
+operations, but does not carry them out.
+
+The result of filter or '.forward' file processing is a list of destinations
+to which a message should be delivered. The deliveries themselves take place
+later, along with all other deliveries for the message. This means that it is
+not possible to test for successful deliveries while filtering. It also means
+that any duplicate addresses that are generated are dropped, because Exim never
+delivers the same message to the same address more than once.
+
+
+
+
+[[SECTtesting]]
+Testing a new filter file
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Filter files, especially the more complicated ones, should always be tested, as
+it is easy to make mistakes. Exim provides a facility for preliminary testing
+of a filter file before installing it. This tests the syntax of the file and
+its basic operation, and can also be used with traditional '.forward' files.
+
+Because a filter can do tests on the content of messages, a test message is
+required. Suppose you have a new filter file called 'myfilter' and a test
+message called 'test-message'. Assuming that Exim is installed with the
+conventional path name '/usr/sbin/sendmail' (some operating systems use
+'/usr/lib/sendmail'), the following command can be used:
+
+ /usr/sbin/sendmail -bf myfilter <test-message
+
+The %-bf% option tells Exim that the following item on the command line is the
+name of a filter file that is to be tested. There is also a %-bF% option,
+which is similar, but which is used for testing system filter files, as opposed
+to user filter files, and which is therefore of use only to the system
+administrator.
+
+The test message is supplied on the standard input. If there are no
+message-dependent tests in the filter, an empty file ('/dev/null') can be
+used. A supplied message must start with header lines or the ``From'' message
+separator line which is found in many multi-message folder files. Note that
+blank lines at the start terminate the header lines. A warning is given if no
+header lines are read.
+
+The result of running this command, provided no errors are detected in the
+filter file, is a list of the actions that Exim would try to take if presented
+with the message for real.
+For example, for an Exim filter, the output
+
+ Deliver message to: gulliver@lilliput.fict.example
+ Save message to: /home/lemuel/mail/archive
+
+means that one copy of the message would be sent to
+'gulliver@lilliput.fict.example', and another would be added to the file
+_/home/lemuel/mail/archive_, if all went well.
+
+The actions themselves are not attempted while testing a filter file in this
+way; there is no check, for example, that any forwarding addresses are valid.
+For an Exim filter,
+if you want to know why a particular action is being taken, add the %-v%
+option to the command. This causes Exim to output the results of any
+conditional tests and to indent its output according to the depth of nesting of
+^if^ commands. Further additional output from a filter test can be generated
+by the ^testprint^ command, which is described below.
+
+When Exim is outputting a list of the actions it would take, if any text
+strings are included in the output, non-printing characters therein are
+converted to escape sequences. In particular, if any text string contains a
+newline character, this is shown as ``\n'' in the testing output.
+
+When testing a filter in this way, Exim makes up an ``envelope'' for the message.
+The recipient is by default the user running the command, and so is the sender,
+but the command can be run with the %-f% option to supply a different sender.
+For example,
+
+...
+/usr/sbin/sendmail -bf myfilter \
+ -f islington@never.where <test-message
+...
+
+Alternatively, if the %-f% option is not used, but the first line of the
+supplied message is a ``From'' separator from a message folder file (not the same
+thing as a 'From:' header line), the sender is taken from there. If %-f% is
+present, the contents of any ``From'' line are ignored.
+
+The ``return path'' is the same as the envelope sender, unless the message
+contains a 'Return-path:' header, in which case it is taken from there. You
+need not worry about any of this unless you want to test out features of a
+filter file that rely on the sender address or the return path.
+
+It is possible to change the envelope recipient by specifying further options.
+The %-bfd% option changes the domain of the recipient address, while the
+%-bfl% option changes the ``local part'', that is, the part before the @ sign.
+An adviser could make use of these to test someone else's filter file.
+
+The %-bfp% and %-bfs% options specify the prefix or suffix for the local part.
+These are relevant only when support for multiple personal mailboxes is
+implemented; see the description in section <<SECTmbox>> below.
+
+
+Installing a filter file
+~~~~~~~~~~~~~~~~~~~~~~~~
+A filter file is normally installed under the name '.forward' in your home
+directory -- it is distinguished from a conventional '.forward' file by its
+first line (described below). However, the file name is configurable, and some
+system administrators may choose to use some different name or location for
+filter files.
+
+
+Testing an installed filter file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Testing a filter file before installation cannot find every potential problem;
+for example, it does not actually run commands to which messages are piped.
+Some ``live'' tests should therefore also be done once a filter is installed.
+
+If at all possible, test your filter file by sending messages from some other
+account. If you send a message to yourself from the filtered account, and
+delivery fails, the error message will be sent back to the same account, which
+may cause another delivery failure. It won't cause an infinite sequence of such
+messages, because delivery failure messages do not themselves generate further
+messages. However, it does mean that the failure won't be returned to you, and
+also that the postmaster will have to investigate the stuck message.
+
+If you have to test an Exim filter from the same account, a sensible precaution
+is to include the line
+
+ if error_message then finish endif
+
+as the first filter command, at least while testing. This causes filtering to
+be abandoned for a delivery failure message, and since no destinations are
+generated, the message goes on to be delivered to the original address. Unless
+there is a good reason for not doing so, it is recommended that the above test
+be left in all Exim filter files.
+(This does not apply to Sieve files.)
+
+
+
+Details of filtering commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The filtering commands for Sieve and Exim filters are completely different in
+syntax and semantics. The Sieve mechanism is defined in RFC 3028; in the next
+chapter we describe how it is integrated into Exim. The subsequent chapter
+covers Exim filtering commands in detail.
+
+
+
+[[CHAPsievefilter]]
+Sieve filter files
+------------------
+The code for Sieve filtering in Exim was contributed by Michael Haardt, and
+most of the content of this chapter is taken from the notes he provided. Since
+Sieve is a extensible language, it is important to understand ``Sieve'' in this
+context as ``the specific implementation of Sieve for Exim''.
+
+This chapter does not contain a description of Sieve, since that can be found
+in RFC 3028, which should be read in conjunction with these notes.
+
+The Exim Sieve implementation offers the core as defined by RFC 3028,
+comparison tests, the *copy*, *envelope*, *fileinto*, and *vacation*
+extensions, but not the *reject* extension. Exim does not support message
+delivery notifications (MDNs), so adding it just to the Sieve filter (as
+required for *reject*) makes little sense.
+
+In order for Sieve to work properly in Exim, the system administrator needs to
+make some adjustments to the Exim configuration. These are described in the
+chapter on the ^redirect^ router in the full Exim specification.
+
+
+Recognition of Sieve filters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A filter file is interpreted as a Sieve filter if its first line is
+
+ # Sieve filter
+
+This is what distinguishes it from a conventional '.forward' file or an Exim
+filter file.
+
+
+
+Saving to specified folders
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+If the system administrator has set things up as suggested in the Exim
+specification, and you use *keep* or *fileinto* to save a mail into a
+folder, absolute files are stored where specified, relative files are stored
+relative to $home$, and *inbox* goes to the standard mailbox location.
+
+
+
+Strings containing header names
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+RFC 3028 does not specify what happens if a string denoting a header field does
+not contain a valid header name, for example, it contains a colon. This
+implementation generates an error instead of ignoring the header field in order
+to ease script debugging, which fits in the common picture of Sieve.
+
+
+
+Exists test with empty list of headers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The *exists* test succeeds only if all specified headers exist. RFC 3028
+does not explicitly specify what happens on an empty list of headers. This
+implementation evaluates that condition as true, interpreting the RFC in a
+strict sense.
+
+
+
+Header test with invalid MIME encoding in header
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Some MUAs process invalid base64 encoded data, generating junk.
+Others ignore junk after seeing an equal sign in base64 encoded data.
+RFC 2047 does not specify how to react in this case, other than stating
+that a client must not forbid to process a message for that reason.
+RFC 2045 specifies that invalid data should be ignored (apparently
+looking at end of line characters). It also specifies that invalid data
+may lead to rejecting messages containing them (and there it appears to
+talk about true encoding violations), which is a clear contradiction to
+ignoring them.
+
+RFC 3028 does not specify how to process incorrect MIME words.
+This implementation treats them literally, as it does if the word is
+correct but its character set cannot be converted to UTF-8.
+
+
+
+Address test for multiple addresses per header
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A header may contain multiple addresses. RFC 3028 does not explicitly
+specify how to deal with them, but since the address test checks if
+anything matches anything else, matching one address suffices to
+satisfy the condition. That makes it impossible to test if a header
+contains a certain set of addresses and no more, but it is more logical
+than letting the test fail if the header contains an additional address
+besides the one the test checks for.
+
+
+
+Semantics of keep
+~~~~~~~~~~~~~~~~~
+The *keep* command is equivalent to
+
+ fileinto "inbox";
+
+It saves the message and resets the implicit keep flag. It does not set the
+implicit keep flag; there is no command to set it once it has been reset.
+
+
+
+Semantics of fileinto
+~~~~~~~~~~~~~~~~~~~~~
+RFC 3028 does not specify whether %fileinto% should try to create a mail folder
+if it does not exist. This implementation allows the sysadmin to configure that
+aspect using the ^appendfile^ transport options %create_directory%,
+%create_file%, and %file_must_exist%. See the ^appendfile^ transport in
+the Exim specification for details.
+
+
+
+Semantics of redirect
+~~~~~~~~~~~~~~~~~~~~~
+Sieve scripts are supposed to be interoperable between servers, so this
+implementation does not allow mail to be redirected to unqualified addresses,
+because the domain would depend on the system being used. On systems with
+virtual mail domains, the default domain is probably not what the user expects
+it to be.
+
+
+
+String arguments
+~~~~~~~~~~~~~~~~
+There has been confusion if the string arguments to *require* are to be
+matched case-sensitively or not. This implementation matches them with
+the match type ^:is^ (default, see section 2.7.1) and the comparator
+^i;ascii-casemap^ (default, see section 2.7.3). The RFC defines the
+command defaults clearly, so any different implementations violate RFC
+3028. The same is valid for comparator names, also specified as strings.
+
+
+
+Number units
+~~~~~~~~~~~~
+There is a mistake in RFC 3028: the suffix G denotes gibi-, not tebibyte.
+The mistake is obvious, because RFC 3028 specifies G to denote 2^30
+(which is gibi, not tebi), and that is what this implementation uses as
+scaling factor for the suffix G.
+
+
+
+RFC compliance
+~~~~~~~~~~~~~~
+Exim requires the first line of a Sieve filter to be
+
+ # Sieve filter
+
+Of course the RFC does not specify that line. Do not expect examples to work
+without adding it, though.
+
+RFC 3028 requires the use of CRLF to terminate a line.
+The rationale was that CRLF is universally used in network protocols
+to mark the end of the line. This implementation does not embed Sieve
+in a network protocol, but uses Sieve scripts as part of the Exim MTA.
+Since all parts of Exim use LF as newline character, this implementation
+does, too, by default, though the system administrator may choose (at Exim
+compile time) to use CRLF instead.
+
+Exim violates RFC 2822, section 3.6.8, by accepting 8-bit header names, so
+this implementation repeats this violation to stay consistent with Exim.
+This is in preparation to UTF-8 data.
+
+Sieve scripts cannot contain NUL characters in strings, but mail
+headers could contain MIME encoded NUL characters, which could never
+be matched by Sieve scripts using exact comparisons. For that reason,
+this implementation extends the Sieve quoted string syntax with \0
+to describe a NUL character, violating \0 being the same as 0 in
+RFC 3028. Even without using \0, the following tests are all true in
+this implementation. Implementations that use C-style strings will only
+evaluate the first test as true.
+
+ Subject: =?iso-8859-1?q?abc=00def
+
+ header :contains "Subject" ["abc"]
+ header :contains "Subject" ["def"]
+ header :matches "Subject" ["abc?def"]
+
+Note that by considering Sieve to be a MUA, RFC 2047 can be interpreted
+in a way that NUL characters truncating strings is allowed for Sieve
+implementations, although not recommended. It is further allowed to use
+encoded NUL characters in headers, but that's not recommended either.
+The above example shows why.
+
+RFC 3028 states that if an implementation fails to convert a character
+set to UTF-8, two strings cannot be equal if one contains octets greater
+than 127. Assuming that all unknown character sets are one-byte character
+sets with the lower 128 octets being US-ASCII is not sound, so this
+implementation violates RFC 3028 and treats such MIME words literally.
+That way at least something could be matched.
+
+The folder specified by *fileinto* must not contain the character
+sequence ``..'' to avoid security problems. RFC 3028 does not specify the
+syntax of folders apart from *keep* being equivalent to
+
+ fileinto "INBOX";
+
+This implementation uses _inbox_ instead.
+
+Sieve script errors currently cause messages to be silently filed into
+_inbox_. RFC 3028 requires that the user is notified of that condition.
+This may be implemented in future by adding a header line to mails that
+are filed into _inbox_ due to an error in the filter.
+
+
+
+[[CHAPeximfilter]]
+Exim filter files
+-----------------
+This chapter contains a full description of the contents of Exim filter files.
+
+
+Format of Exim filter files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Apart from leading white space, the first text in an Exim filter file must be
+
+ # Exim filter
+
+This is what distinguishes it from a conventional '.forward' file or a Sieve
+filter file. If the file does not have this initial line (or the equivalent for
+a Sieve filter), it is treated as a conventional '.forward' file, both when
+delivering mail and when using the %-bf% testing mechanism. The white space in
+the line is optional, and any capitalization may be used. Further text on the
+same line is treated as a comment. For example, you could have
+
+ # Exim filter <<== do not edit or remove this line!
+
+The remainder of the file is a sequence of filtering commands, which consist of
+keywords and data values. For example, in the command
+
+ deliver gulliver@lilliput.fict.example
+
+the keyword is `deliver` and the data value is
+`gulliver@lilliput.fict.example`. White space or line breaks separate the
+components of a command, except in the case of conditions for the ^if^ command,
+where round brackets (parentheses) also act as separators. Complete commands
+are separated from each other by white space or line breaks; there are no
+special terminators. Thus, several commands may appear on one line, or one
+command may be spread over a number of lines.
+
+If the character # follows a separator anywhere in a command, everything from
+# up to the next newline is ignored. This provides a way of including comments
+in a filter file.
+
+
+Data values in filter commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+There are two ways in which a data value can be input:
+
+- If the text contains no white space then it can be typed verbatim. However, if
+it is part of a condition, it must also be free of round brackets
+(parentheses), as these are used for grouping in conditions.
+
+- Otherwise, it must be enclosed in double quotation marks. In this case, the
+character \ (backslash) is treated as an ``escape character'' within the string,
+causing the following character or characters to be treated specially:
+
+&&&&
+`\n` is replaced by a newline
+`\r` is replaced by a carriage return
+`\t` is replaced by a tab
+&&&&
+
+Backslash followed by up to three octal digits is replaced by the character
+specified by those digits, and \x followed by up to two hexadecimal digits is
+treated similarly. Backslash followed by any other character is replaced
+by the second character, so that in particular, \\" becomes " and \\ becomes
+\. A data item enclosed in double quotes can be continued onto the next line
+by ending the first line with a backslash. Any leading white space at the start
+of the continuation line is ignored.
+
+In addition to the escape character processing that occurs when strings are
+enclosed in quotes, most data values are also subject to 'string expansion'
+(as described in the next section), in which case the characters `\$` and `\`
+are also significant. This means that if a single backslash is actually
+required in such a string, and the string is also quoted, \\\\ has to be
+entered.
+
+The maximum permitted length of a data string, before expansion, is 1024
+characters.
+
+
+++++++++++++
+<?hard-pagebreak?>
+++++++++++++
+
+[[SECTfilterstringexpansion]]
+String expansion
+~~~~~~~~~~~~~~~~
+Most data values are expanded before use. Expansion consists of replacing
+substrings beginning with `\$` with other text. The full expansion facilities
+available in Exim are extensive. If you want to know everything that Exim can
+do with strings, you should consult the chapter on string expansion in the Exim
+documentation.
+
+In filter files, by far the most common use of string expansion is the
+substitution of the contents of a variable. For example, the substring
+
+ $reply_address
+
+is replaced by the address to which replies to the message should be sent. If
+such a variable name is followed by a letter or digit or underscore, it must be
+enclosed in curly brackets (braces), for example,
+
+ ${reply_address}
+
+If a `\$` character is actually required in an expanded string, it must be
+escaped with a backslash, and because backslash is also an escape character in
+quoted input strings, it must be doubled in that case. The following two
+examples illustrate two different ways of testing for a `\$` character in a
+message:
+
+ if $message_body contains \$ then ...
+ if $message_body contains "\\$" then ...
+
+You can prevent part of a string from being expanded by enclosing it between
+two occurrences of `\N`. For example,
+
+ if $message_body contains \N$$$$\N then ...
+
+tests for a run of four dollar characters.
+
+
+Some useful general variables
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A complete list of the available variables is given in the Exim documentation.
+This shortened list contains the ones that are most likely to be useful in
+personal filter files:
+
+$body_linecount$: The number of lines in the body of the message.
+
+$body_zerocount$: The number of binary zero characters in the body of the
+message.
+
+
+$home$: In conventional configurations, this variable normally contains the
+user's home directory. The system administrator can, however, change this.
+
+$local_part$: The part of the email address that precedes the @ sign --
+normally the user's login name. If support for multiple personal mailboxes is
+enabled (see section <<SECTmbox>> below) and a prefix or suffix for the local
+part was recognized, it is removed from the string in this variable.
+
+$local_part_prefix$: If support for multiple personal mailboxes is enabled
+(see section <<SECTmbox>> below), and a local part prefix was recognized,
+this variable contains the prefix. Otherwise it contains an empty string.
+
+$local_part_suffix$: If support for multiple personal mailboxes is enabled
+(see section <<SECTmbox>> below), and a local part suffix was recognized,
+this variable contains the suffix. Otherwise it contains an empty string.
+
+$message_body$: The initial portion of the body of the message. By default,
+up to 500 characters are read into this variable, but the system administrator
+can configure this to some other value. Newlines in the body are converted into
+single spaces.
+
+$message_body_end$: The final portion of the body of the message, formatted
+and limited in the same way as $message_body$.
+
+$message_body_size$: The size of the body of the message, in bytes.
+
+$message_headers$: The header lines of the message, concatenated into a
+single string, with newline characters between them.
+
+$message_id$: The message's local identification string, which is unique for
+each message handled by a single host.
+
+$message_size$: The size of the entire message, in bytes.
+
+$original_local_part$: When an address that arrived with the message is
+being processed, this contains the same value as the variable $local_part$.
+However, if an address generated by an alias, forward, or filter file is being
+processed, this variable contains the local part of the original address.
+
+$reply_address$: The contents of the 'Reply-to:' header, if the message
+has one; otherwise the contents of the 'From:' header. It is the address to
+which normal replies to the message should be sent.
+
+$return_path$: The return path -- that is, the sender field that will be
+transmitted as part of the message's envelope if the message is sent to another
+host. This is the address to which delivery errors are sent. In many cases,
+this variable has the same value as $sender_address$, but if, for example,
+an incoming message to a mailing list has been expanded, $return_path$ may
+have been changed to contain the address of the list maintainer.
+
+$sender_address$: The sender address that was received in the envelope of
+the message. This is not necessarily the same as the contents of the 'From:'
+or 'Sender:' header lines. For delivery error messages (``bounce messages'')
+there is no sender address, and this variable is empty.
+
+$tod_full$: A full version of the time and date, for example: Wed, 18 Oct
+1995 09:51:40 +0100. The timezone is always given as a numerical offset from
+GMT.
+
+$tod_log$: The time and date in the format used for writing Exim's log files,
+without the timezone, for example: 1995-10-12 15:32:29.
+
+$tod_zone$: The local timezone offset, for example: +0100.
+
+
+
+[[SECTheadervariables]]
+Header variables
+~~~~~~~~~~~~~~~~
+There is a special set of expansion variables containing the header lines of
+the message being processed. These variables have names beginning with
+$header_$ followed by the name of the header line, terminated by a colon.
+For example,
+
+ $header_from:
+ $header_subject:
+
+The whole item, including the terminating colon, is replaced by the contents of
+the message header line. If there is more than one header line with the same
+name, their contents are concatenated. For header lines whose data consists of
+a list of addresses (for example, 'From:' and 'To:'), a comma and newline is
+inserted between each set of data. For all other header lines, just a newline
+is used.
+
+Leading and trailing white space is removed from header line data, and if there
+are any MIME ``words'' that are encoded as defined by RFC 2047 (because they
+contain non-ASCII characters), they are decoded and translated, if possible, to
+a local character set. Translation is attempted only on operating systems that
+have the ^^iconv()^^ function. This makes the header line look the same as it
+would when displayed by an MUA. The default character set is ISO-8859-1, but
+this can be changed by means of the ^headers^ command (see below).
+
+If you want to see the actual characters that make up a header line, you can
+specify $rheader_$ instead of $header_$. This inserts the ``raw''
+header line, unmodified.
+
+There is also an intermediate form, requested by $bheader_$, which removes
+leading and trailing space and decodes MIME ``words'', but does not do any
+character translation. If an attempt to decode what looks superficially like a
+MIME ``word'' fails, the raw string is returned. If decoding produces a binary
+zero character, it is replaced by a question mark.
+
+The capitalization of the name following $header_$ is not significant.
+Because any printing character except colon may appear in the name of a
+message's header (this is a requirement of RFC 2822, the document that
+describes the format of a mail message) curly brackets must 'not' be used in
+this case, as they will be taken as part of the header name. Two shortcuts are
+allowed in naming header variables:
+
+- The initiating $header_$, $rheader_$, or $bheader_$ can be
+abbreviated to $h_$, $rh_$, or $bh_$, respectively.
+
+- The terminating colon can be omitted if the next character is white space. The
+white space character is retained in the expanded string. However, this is not
+recommended, because it makes it easy to forget the colon when it really is
+needed.
+
+If the message does not contain a header of the given name, an empty string is
+substituted. Thus it is important to spell the names of headers correctly. Do
+not use $header_Reply_to$ when you really mean $header_Reply-to$.
+
+
+User variables
+~~~~~~~~~~~~~~
+There are ten user variables with names $n0$ -- $n9$ that can be
+incremented by the ^add^ command (see section <<SECTadd>>). These can be used
+for ``scoring'' messages in various ways. If Exim is configured to run a
+``system filter'' on every message, the values left in these variables are
+copied into the variables $sn0$ -- $sn9$ at the end of the system filter, thus
+making them available to users' filter files. How these values are used is
+entirely up to the individual installation.
+
+
+Current directory
+~~~~~~~~~~~~~~~~~
+The contents of your filter file should not make any assumptions about the
+current directory. It is best to use absolute paths for file names; you
+can normally make use of the $home$ variable to refer to your home directory.
+The ^save^ command automatically inserts $home$ at the start of non-absolute
+paths.
+
+
+
+
+[[SECTsigdel]]
+Significant deliveries
+~~~~~~~~~~~~~~~~~~~~~~
+When in the course of delivery a message is processed by a filter file, what
+happens next, that is, after the filter file has been processed, depends on
+whether or not the filter sets up any 'significant deliveries'. If at least
+one significant delivery is set up, the filter is considered to have handled
+the entire delivery arrangements for the current address, and no further
+processing of the address takes place. If, however, no significant deliveries
+are set up, Exim continues processing the current address as if there were no
+filter file, and typically sets up a delivery of a copy of the message into a
+local mailbox. In particular, this happens in the special case of a filter file
+containing only comments.
+
+The delivery commands ^deliver^, ^save^, and ^pipe^ are by default
+significant. However, if such a command is preceded by the word ^unseen^, its
+delivery is not considered to be significant. In contrast, other commands such
+as ^mail^ and ^vacation^ do not set up significant deliveries unless
+preceded by the word ^seen^.
+
+The following example commands set up significant deliveries:
+
+ deliver jack@beanstalk.example
+ pipe $home/bin/mymailscript
+ seen mail subject "message discarded"
+ seen finish
+
+The following example commands do not set up significant deliveries:
+
+ unseen deliver jack@beanstalk.example
+ unseen pipe $home/bin/mymailscript
+ mail subject "message discarded"
+ finish
+
+
+
+
+Filter commands
+~~~~~~~~~~~~~~~
+The filter commands that are described in subsequent sections are listed
+below, with the section in which they are described in brackets:
+
+[frame="none"]
+`-------------`-----------------------------------------------
+^add^ ~~increment a user variable (section <<SECTadd>>)
+^deliver^ ~~deliver to an email address (section <<SECTdeliver>>)
+^fail^ ~~force delivery failure (sysadmin use) (section <<SECTfail>>)
+^finish^ ~~end processing (section <<SECTfinish>>)
+^freeze^ ~~freeze message (sysadmin use) (section <<SECTfreeze>>)
+^headers^ ~~set the header character set (section <<SECTheaders>>)
+^if^ ~~test condition(s) (section <<SECTif>>)
+^logfile^ ~~define log file (section <<SECTlog>>)
+^logwrite^ ~~write to log file (section <<SECTlog>>)
+^mail^ ~~send a reply message (section <<SECTmail>>)
+^pipe^ ~~pipe to a command (section <<SECTpipe>>)
+^save^ ~~save to a file (section <<SECTsave>>)
+^testprint^ ~~print while testing (section <<SECTtestprint>>)
+^vacation^ ~~tailored form of ^mail^ (section <<SECTmail>>)
+--------------------------------------------------------------
+
+The ^headers^ command has additional parameters that can be used only in a
+system filter. The ^fail^ and ^freeze^ commands are available only when
+Exim's filtering facilities are being used as a system filter, and are
+therefore usable only by the system administrator and not by ordinary users.
+They are mentioned only briefly in this document; for more information, see the
+main Exim specification.
+
+
+
+[[SECTadd]]
+The add command
+~~~~~~~~~~~~~~~
+&&&
+` add `<'number'>` to `<'user variable'>
+`e.g. add 2 to n3`
+&&&
+
+There are 10 user variables of this type, with names $n0$ -- $n9$. Their
+values can be obtained by the normal expansion syntax (for example $n3$) in
+other commands. At the start of filtering, these variables all contain zero.
+Both arguments of the ^add^ command are expanded before use, making it
+possible to add variables to each other. Subtraction can be obtained by adding
+negative numbers.
+
+
+
+[[SECTdeliver]]
+The deliver command
+~~~~~~~~~~~~~~~~~~~
+
+&&&
+` deliver` <'mail address'>
+`e.g. deliver "Dr Livingstone <David@somewhere.africa.example>"`
+&&&
+
+This command provides a forwarding operation. The delivery that it sets up is
+significant unless the command is preceded by ^unseen^ (see section
+<<SECTsigdel>>). The message is sent on to the given address, exactly as
+happens if the address had appeared in a traditional '.forward' file. If you
+want to deliver the message to a number of different addresses, you can use
+more than one ^deliver^ command (each one may have only one address). However,
+duplicate addresses are discarded.
+
+To deliver a copy of the message to your normal mailbox, your login name can be
+given as the address. Once an address has been processed by the filtering
+mechanism, an identical generated address will not be so processed again, so
+doing this does not cause a loop.
+
+However, if you have a mail alias, you should 'not' refer to it here. For
+example, if the mail address 'L.Gulliver' is aliased to 'lg303' then all
+references in Gulliver's '.forward' file should be to 'lg303'. A reference
+to the alias will not work for messages that are addressed to that alias,
+since, like '.forward' file processing, aliasing is performed only once on an
+address, in order to avoid looping.
+
+Following the new address, an optional second address, preceded by
+^errors_to^ may appear. This changes the address to which delivery errors on
+the forwarded message will be sent. Instead of going to the message's original
+sender, they go to this new address. For ordinary users, the only value that is
+permitted for this address is the user whose filter file is being processed.
+For example, the user 'lg303' whose mailbox is in the domain
+'lilliput.example' could have a filter file that contains
+
+ deliver jon@elsewhere.example errors_to lg303@lilliput.example
+
+Clearly, using this feature makes sense only in situations where not all
+messages are being forwarded. In particular, bounce messages must not be
+forwarded in this way, as this is likely to create a mail loop if something
+goes wrong.
+
+
+
+[[SECTsave]]
+The save command
+~~~~~~~~~~~~~~~~
+&&&
+` save `<'file name'>
+`e.g. save $home/mail/bookfolder`
+&&&
+
+This command specifies that a copy of the message is to be appended to the
+given file (that is, the file is to be used as a mail folder). The delivery
+that ^save^ sets up is significant unless the command is preceded by
+^unseen^ (see section <<SECTsigdel>>).
+
+More than one ^save^ command may be obeyed; each one causes a copy of the
+message to be written to its argument file, provided they are different
+(duplicate ^save^ commands are ignored).
+
+If the file name does not start with a / character, the contents of the
+$home$ variable are prepended, unless it is empty. In conventional
+configurations, this variable is normally set in a user filter to the user's
+home directory, but the system administrator may set it to some other path. In
+some configurations, $home$ may be unset, in which case a non-absolute path
+name may be generated. Such configurations convert this to an absolute path
+when the delivery takes place. In a system filter, $home$ is never set.
+
+The user must of course have permission to write to the file, and the writing
+of the file takes place in a process that is running as the user, under the
+user's primary group. Any secondary groups to which the user may belong are not
+normally taken into account, though the system administrator can configure Exim
+to set them up. In addition, the ability to use this command at all is
+controlled by the system administrator -- it may be forbidden on some systems.
+
+An optional mode value may be given after the file name. The value for the mode
+is interpreted as an octal number, even if it does not begin with a zero. For
+example:
+
+ save /some/folder 640
+
+This makes it possible for users to override the system-wide mode setting for
+file deliveries, which is normally 600. If an existing file does not have the
+correct mode, it is changed.
+
+An alternative form of delivery may be enabled on your system, in which each
+message is delivered into a new file in a given directory. If this is the case,
+this functionality can be requested by giving the directory name terminated by
+a slash after the ^save^ command, for example
+
+ save separated/messages/
+
+There are several different formats for such deliveries; check with your system
+administrator or local documentation to find out which (if any) are available
+on your system. If this functionality is not enabled, the use of a path name
+ending in a slash causes an error.
+
+
+
+[[SECTpipe]]
+The pipe command
+~~~~~~~~~~~~~~~~
+&&&
+` pipe `<'command'>
+`e.g. pipe "$home/bin/countmail $sender_address"`
+&&&
+
+This command specifies that the message is to be delivered to the specified
+command using a pipe. The delivery that it sets up is significant unless the
+command is preceded by ^unseen^ (see section <<SECTsigdel>>). Remember,
+however, that no deliveries are done while the filter is being processed. All
+deliveries happen later on. Therefore, the result of running the pipe is not
+available to the filter.
+
+When the deliveries are done, a separate process is run, and a copy of the
+message is passed on its standard input. The process runs as the user, under
+the user's primary group. Any secondary groups to which the user may belong are
+not normally taken into account, though the system administrator can configure
+Exim to set them up. More than one ^pipe^ command may appear; each one causes
+a copy of the message to be written to its argument pipe, provided they are
+different (duplicate ^pipe^ commands are ignored).
+
+When the time comes to transport the message,
+the command supplied to ^pipe^ is split up by Exim into a command name and a
+number of arguments. These are delimited by white space except for arguments
+enclosed in double quotes, in which case backslash is interpreted as an escape,
+or in single quotes, in which case no escaping is recognized. Note that as the
+whole command is normally supplied in double quotes, a second level of quoting
+is required for internal double quotes. For example:
+
+ pipe "$home/myscript \"size is $message_size\""
+
+String expansion is performed on the separate components after the line has
+been split up, and the command is then run directly by Exim; it is not run
+under a shell. Therefore, substitution cannot change the number of arguments,
+nor can quotes, backslashes or other shell metacharacters in variables cause
+confusion.
+
+Documentation for some programs that are normally run via this kind of pipe
+often suggest that the command should start with
+
+ IFS=" "
+
+This is a shell command, and should 'not' be present in Exim filter files,
+since it does not normally run the command under a shell.
+
+However, there is an option that the administrator can set to cause a shell to
+be used. In this case, the entire command is expanded as a single string and
+passed to the shell for interpretation. It is recommended that this be avoided
+if at all possible, since it can lead to problems when inserted variables
+contain shell metacharacters.
+
+The default PATH set up for the command is determined by the system
+administrator, usually containing at least _/usr/bin_ so that common commands
+are available without having to specify an absolute file name. However, it is
+possible for the system administrator to restrict the pipe facility so that the
+command name must not contain any / characters, and must be found in one of the
+directories in the configured PATH. It is also possible for the system
+administrator to lock out the use of the ^pipe^ command altogether.
+
+When the command is run, a number of environment variables are set up. The
+complete list for pipe deliveries may be found in the Exim reference manual.
+Those that may be useful for pipe deliveries from user filter files are:
+
+&&&
+`DOMAIN ` the domain of the address
+`HOME ` your home directory
+`LOCAL_PART ` see below
+`LOCAL_PART_PREFIX ` see below
+`LOCAL_PART_SUFFIX ` see below
+`LOGNAME ` your login name
+`MESSAGE_ID ` the unique id of the message
+`PATH ` the command search path
+`RECIPIENT ` the complete recipient address
+`SENDER ` the sender of the message
+`SHELL ` `/bin/sh`
+`USER ` see below
+&&&
+
+LOCAL_PART, LOGNAME, and USER are all set to the same value,
+namely, your login id. LOCAL_PART_PREFIX and LOCAL_PART_SUFFIX may
+be set if Exim is configured to recognize prefixes or suffixes in the local
+parts of addresses. For example, a message addressed to
+'pat-suf2@domain.example' may cause the filter for user 'pat' to be run. If
+this sets up a pipe delivery, LOCAL_PART_SUFFIX is `-suf2` when the
+pipe command runs. The system administrator has to configure Exim specially for
+this feature to be available.
+
+If you run a command that is a shell script, be very careful in your use of
+data from the incoming message in the commands in your script. RFC 2822 is very
+generous in the characters that are permitted to appear in mail addresses, and
+in particular, an address may begin with a vertical bar or a slash. For this
+reason you should always use quotes round any arguments that involve data from
+the message, like this:
+
+ /some/command '$SENDER'
+
+so that inserted shell meta-characters do not cause unwanted effects.
+
+Remember that, as was explained earlier, the pipe command is not run at the
+time the filter file is interpreted. The filter just defines what deliveries
+are required for one particular addressee of a message. The deliveries
+themselves happen later, once Exim has decided everything that needs to be done
+for the message.
+
+A consequence of this is that you cannot inspect the return code from the pipe
+command from within the filter. Nevertheless, the code returned by the command
+is important, because Exim uses it to decide whether the delivery has succeeded
+or failed.
+
+The command should return a zero completion code if all has gone well. Most
+non-zero codes are treated by Exim as indicating a failure of the pipe. This is
+treated as a delivery failure, causing the message to be returned to its
+sender. However, there are some completion codes that are treated as temporary
+errors. The message remains on Exim's spool disk, and the delivery is tried
+again later, though it will ultimately time out if the delivery failures go on
+too long. The completion codes to which this applies can be specified by the
+system administrator; the default values are 73 and 75.
+
+The pipe command should not normally write anything to its standard output or
+standard error file descriptors. If it does, whatever is written is normally
+returned to the sender of the message as a delivery error, though this action
+can be varied by the system administrator.
+
+
+
+[[SECTmail]]
+Mail commands
+~~~~~~~~~~~~~
+There are two commands that cause the creation of a new mail message, neither
+of which count as a significant delivery unless the command is preceded by the
+word ^seen^ (see section <<SECTsigdel>>). This is a powerful facility, but it
+should be used with care, because of the danger of creating infinite sequences
+of messages. The system administrator can forbid the use of these commands
+altogether.
+
+To help prevent runaway message sequences, these commands have no effect when
+the incoming message is a bounce (delivery error) message, and messages sent by
+this means are treated as if they were reporting delivery errors. Thus, they
+should never themselves cause a bounce message to be returned. The basic
+mail-sending command is
+
+&&&
+`mail [to `<'address-list'>`]`
+` [cc `<'address-list'>`]`
+` [bcc `<'address-list'>`]`
+` [from `<'address'>`]`
+` [reply_to `<'address'>`]`
+` [subject `<'text'>`]`
+` [extra_headers `<'text'>`]`
+` [text `<'text'>`]`
+` [[expand] file `<'filename'>`]`
+` [return message]`
+` [log `<'log file name'>`]`
+` [once `<'note file name'>`]`
+` [once_repeat `<'time interval'>`]`
+
+`e.g. mail text "Your message about $h_subject: has been received"`
+&&&
+
+Each <'address-list'> can contain a number of addresses, separated by commas,
+in the format of a 'To:' or 'Cc:' header line. In fact, the text you supply
+here is copied exactly into the appropriate header line. It may contain
+additional information as well as email addresses. For example:
+
+...
+mail to "Julius Caesar <jc@rome.example>, \
+ <ma@rome.example> (Mark A.)"
+...
+
+Similarly, the texts supplied for ^from^ and ^reply_to^ are copied into
+their respective header lines.
+
+As a convenience for use in one common case, there is also a command called
+^vacation^. It behaves in the same way as ^mail^, except that the defaults for
+the %subject%, %file%, %log%, %once%, and %once_repeat% options are
+
+ subject "On vacation"
+ expand file .vacation.msg
+ log .vacation.log
+ once .vacation
+ once_repeat 7d
+
+respectively. These are the same file names and repeat period used by the
+traditional Unix ^vacation^ command. The defaults can be overridden by
+explicit settings, but if a file name is given its contents are expanded only
+if explicitly requested.
+
+*Warning*: The ^vacation^ command should always be used conditionally,
+subject to at least the ^personal^ condition (see section <<SECTpersonal>>
+below) so as not to send automatic replies to non-personal messages from
+mailing lists or elsewhere. Sending an automatic response to a mailing list or
+a mailing list manager is an Internet Sin.
+
+For both commands, the key/value argument pairs can appear in any order. At
+least one of ^text^ or ^file^ must appear (except with ^vacation^, where
+there is a default for ^file^); if both are present, the text string appears
+first in the message. If ^expand^ precedes ^file^, each line of the file is
+subject to string expansion before it is included in the message.
+
+Several lines of text can be supplied to ^text^ by including the escape
+sequence ``\n'' in the string wherever a newline is required. If the command is
+output during filter file testing, newlines in the text are shown as ``\n''.
+
+Note that the keyword for creating a 'Reply-To:' header is ^reply_to^,
+because Exim keywords may contain underscores, but not hyphens. If the ^from^
+keyword is present and the given address does not match the user who owns the
+forward file, Exim normally adds a 'Sender:' header to the message,
+though it can be configured not to do this.
+
+The %extra_headers% keyword allows you to add custom header lines to the
+message. The text supplied must be one or more syntactically valid RFC 2882
+header lines. You can use ``\n'' within quoted text to specify newlines between
+headers, and also to define continued header lines. For example:
+
+ extra_headers "h1: first\nh2: second\n continued\nh3: third"
+
+No newline should appear at the end of the final header line.
+
+If no ^to^ argument appears, the message is sent to the address in the
+$reply_address$ variable (see section <<SECTfilterstringexpansion>> above).
+An 'In-Reply-To:' header is automatically included in the created message,
+giving a reference to the message identification of the incoming message.
+
+If ^return message^ is specified, the incoming message that caused the filter
+file to be run is added to the end of the message, subject to a maximum size
+limitation.
+
+If a log file is specified, a line is added to it for each message sent.
+
+If a ^once^ file is specified, it is used to hold a database for remembering
+who has received a message, and no more than one message is ever sent to any
+particular address, unless ^once_repeat^ is set. This specifies a time
+interval after which another copy of the message is sent. The interval is
+specified as a sequence of numbers, each followed by the initial letter of one
+of ``seconds'', ``minutes'', ``hours'', ``days'', or ``weeks''. For example,
+
+ once_repeat 5d4h
+
+causes a new message to be sent if 5 days and 4 hours have elapsed since the
+last one was sent. There must be no white space in a time interval.
+
+Commonly, the file name specified for ^once^ is used as the base name for
+direct-access (DBM) file operations. There are a number of different DBM
+libraries in existence. Some operating systems provide one as a default, but
+even in this case a different one may have been used when building Exim. With
+some DBM libraries, specifying ^once^ results in two files being created,
+with the suffixes _.dir_ and _.pag_ being added to the given name. With
+some others a single file with the suffix _.db_ is used, or the name is used
+unchanged.
+
+Using a DBM file for implementing the ^once^ feature means that the file
+grows as large as necessary. This is not usually a problem, but some system
+administrators want to put a limit on it. The facility can be configured not to
+use a DBM file, but instead, to use a regular file with a maximum size. The
+data in such a file is searched sequentially, and if the file fills up, the
+oldest entry is deleted to make way for a new one. This means that some
+correspondents may receive a second copy of the message after an unpredictable
+interval. Consult your local information to see if your system is configured
+this way.
+
+More than one ^mail^ or ^vacation^ command may be obeyed in a single filter
+run; they are all honoured, even when they are to the same recipient.
+
+
+
+[[SECTlog]]
+Logging commands
+~~~~~~~~~~~~~~~~
+A log can be kept of actions taken by a filter file. This facility is normally
+available in conventional configurations, but there are some situations where
+it might not be. Also, the system administrator may choose to disable it. Check
+your local information if in doubt.
+
+Logging takes place while the filter file is being interpreted. It does not
+queue up for later like the delivery commands. The reason for this is so that a
+log file need be opened only once for several write operations. There are two
+commands, neither of which constitutes a significant delivery. The first
+defines a file to which logging output is subsequently written:
+
+&&&
+` logfile `<'file name'>
+`e.g. logfile $home/filter.log`
+&&&
+
+The file name must be fully qualified. You can use $home$, as in this
+example, to refer to your home directory. The file name may optionally be
+followed by a mode for the file, which is used if the file has to be created.
+For example,
+
+ logfile $home/filter.log 0644
+
+The number is interpreted as octal, even if it does not begin with a zero.
+The default for the mode is 600. It is suggested that the ^logfile^ command
+normally appear as the first command in a filter file. Once ^logfile^ has
+been obeyed, the ^logwrite^ command can be used to write to the log file:
+
+&&&
+` logwrite "`<'some text string'>`"`
+`e.g. logwrite "$tod_log $message_id processed"`
+&&&
+
+It is possible to have more than one ^logfile^ command, to specify writing to
+different log files in different circumstances. Writing takes place at the end
+of the file, and a newline character is added to the end of each string if
+there isn't one already there. Newlines can be put in the middle of the string
+by using the ``\n'' escape sequence. Lines from simultaneous deliveries may get
+interleaved in the file, as there is no interlocking, so you should plan your
+logging with this in mind. However, data should not get lost.
+
+
+
+[[SECTfinish]]
+The finish command
+~~~~~~~~~~~~~~~~~~
+The command ^finish^, which has no arguments, causes Exim to stop
+interpreting the filter file. This is not a significant action unless preceded
+by ^seen^. A filter file containing only ^seen finish^ is a black hole.
+
+
+[[SECTtestprint]]
+The testprint command
+~~~~~~~~~~~~~~~~~~~~~
+It is sometimes helpful to be able to print out the values of variables when
+testing filter files. The command
+
+&&&
+` testprint `<'text'>
+`e.g. testprint "home=$home reply_address=$reply_address"`
+&&&
+
+does nothing when mail is being delivered. However, when the filtering code is
+being tested by means of the %-bf% option (see section <<SECTtesting>> above),
+the value of the string is written to the standard output.
+
+
+++++++++++++
+<?hard-pagebreak?>
+++++++++++++
+[[SECTfail]]
+The fail command
+~~~~~~~~~~~~~~~~
+When Exim's filtering facilities are being used as a system filter, the
+^fail^ command is available, to force delivery failure. Because this command
+is normally usable only by the system administrator, and not enabled for use by
+ordinary users, it is described in more detail in the main Exim specification
+rather than in this document.
+
+
+[[SECTfreeze]]
+The freeze command
+~~~~~~~~~~~~~~~~~~
+When Exim's filtering facilities are being used as a system filter, the
+^freeze^ command is available, to freeze a message on the queue. Because this
+command is normally usable only by the system administrator, and not enabled
+for use by ordinary users, it is described in more detail in the main Exim
+specification rather than in this document.
+
+
+
+[[SECTheaders]]
+The headers command
+~~~~~~~~~~~~~~~~~~~
+The ^headers^ command can be used to change the target character set that is
+used when translating the contents of encoded header lines for insertion by the
+$header_$ mechanism (see section <<SECTheadervariables>> above). The default
+can be set in the Exim configuration; if not specified, ISO-8859-1 is used. The
+only currently supported format for the ^headers^ command in user filters is as
+in this example:
+
+ headers charset "UTF-8"
+
+That is, ^headers^ is followed by the word ^charset^ and then the name of a
+character set. This particular example would be useful if you wanted to compare
+the contents of a header to a UTF-8 string.
+
+In system filter files, the ^headers^ command can be used to add or remove
+header lines from the message. These features are described in the main Exim
+specification.
+
+
+
+[[SECTif]]
+Obeying commands conditionally
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Most of the power of filtering comes from the ability to test conditions and
+obey different commands depending on the outcome. The ^if^ command is used to
+specify conditional execution, and its general form is
+
+&&&
+`if `<'condition'>
+`then `<'commands'>
+`elif `<'condition'>
+`then `<'commands'>
+`else `<'commands'>
+`endif`
+&&&
+
+There may be any number of ^elif^ and ^then^ sections (including none) and
+the ^else^ section is also optional. Any number of commands, including nested
+^if^ commands, may appear in any of the <'commands'> sections.
+
+Conditions can be combined by using the words ^and^ and ^or^, and round
+brackets (parentheses) can be used to specify how several conditions are to
+combine. Without brackets, ^and^ is more binding than ^or^.
+For example,
+
+ if
+ $h_subject: contains "Make money" or
+ $h_precedence: is "junk" or
+ ($h_sender: matches ^\\d{8}@ and not personal) or
+ $message_body contains "this is not spam"
+ then
+ seen finish
+ endif
+
+A condition can be preceded by ^not^ to negate it, and there are also some
+negative forms of condition that are more English-like.
+
+
+
+++++++++++++
+<?hard-pagebreak?>
+++++++++++++
+String testing conditions
+~~~~~~~~~~~~~~~~~~~~~~~~~
+There are a number of conditions that operate on text strings, using the words
+``begins'', ``ends'', ``is'', ``contains'' and ``matches''. If you want to apply the same
+test to more than one header line, you can easily concatenate them into a
+single string for testing, as in this example:
+
+ if "$h_to:, $h_cc:" contains me@domain.example then ...
+
+If a string-testing condition name is written in lower case, the testing
+of letters is done without regard to case; if it is written in upper case
+(for example, ``CONTAINS''), the case of letters is taken into account.
+
+&&&
+` `<'text1'>` begins `<'text2'>
+` `<'text1'>` does not begin `<'text2'>
+`e.g. $header_from: begins "Friend@"`
+&&&
+
+A ``begins'' test checks for the presence of the second string at the start of
+the first, both strings having been expanded.
+
+&&&
+` `<'text1'>` ends `<'text2'>
+` `<'text1'>` does not end `<'text2'>
+`e.g. $header_from: ends "public.com.example"`
+&&&
+
+An ``ends'' test checks for the presence of the second string at the end of
+the first, both strings having been expanded.
+
+&&&
+` `<'text1'>` is `<'text2'>
+` `<'text1'>` is not `<'text2'>
+`e.g. $local_part_suffix is "-foo"`
+&&&
+
+An ``is'' test does an exact match between the strings, having first expanded
+both strings.
+
+&&&
+` `<'text1'>` contains `<'text2'>
+` `<'text1'>` does not contain `<'text2'>
+`e.g. $header_subject: contains "evolution"`
+&&&
+
+A ``contains'' test does a partial string match, having expanded both strings.
+
+&&&
+` `<'text1'>` matches `<'text2'>
+` `<'text1'>` does not match `<'text2'>
+`e.g. $sender_address matches "(bill|john)@"`
+&&&
+
+For a ``matches'' test, after expansion of both strings, the second one is
+interpreted as a regular expression. Exim uses the PCRE regular expression
+library, which provides regular expressions that are compatible with Perl.
+
+The match succeeds if the regular expression matches any part of the first
+string. If you want a regular expression to match only at the start or end of
+the subject string, you must encode that requirement explicitly, using the `^`
+or `$` metacharacters. The above example, which is not so constrained, matches
+all these addresses:
+
+ bill@test.example
+ john@some.example
+ spoonbill@example.com
+ littlejohn@example.com
+
+To match only the first two, you could use this:
+
+ if $sender_address matches "^(bill|john)@" then ...
+
+Care must be taken if you need a backslash in a regular expression, because
+backslashes are interpreted as escape characters both by the string expansion
+code and by Exim's normal processing of strings in quotes. For example, if you
+want to test the sender address for a domain ending in '.com' the regular
+expression is
+
+ \.com$
+
+The backslash and dollar sign in that expression have to be escaped when used
+in a filter command, as otherwise they would be interpreted by the expansion
+code. Thus, what you actually write is
+
+ if $sender_address matches \\.com\$
+
+An alternative way of handling this is to make use of the `\N` expansion
+flag for suppressing expansion:
+
+ if $sender_address matches \N\.com$\N
+
+Everything between the two occurrences of `\N` is copied without change by
+the string expander (and in fact you do not need the final one, because it is
+at the end of the string). If the regular expression is given in quotes
+(mandatory only if it contains white space) you have to write either
+
+ if $sender_address matches "\\\\.com\\$"
+
+or
+
+ if $sender_address matches "\\N\\.com$\\N"
+
+
+If the regular expression contains bracketed sub-expressions, numeric
+variable substitutions such as $1$ can be used in the subsequent actions
+after a successful match. If the match fails, the values of the numeric
+variables remain unchanged. Previous values are not restored after ^endif^.
+In other words, only one set of values is ever available. If the condition
+contains several sub-conditions connected by ^and^ or ^or^, it is the
+strings extracted from the last successful match that are available in
+subsequent actions. Numeric variables from any one sub-condition are also
+available for use in subsequent sub-conditions, because string expansion of a
+condition occurs just before it is tested.
+
+
+Numeric testing conditions
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+The following conditions are available for performing numerical tests:
+
+&&&
+` `<'number1'>` is above `<'number2'>
+` `<'number1'>` is not above `<'number2'>
+` `<'number1'>` is below `<'number2'>
+` `<'number1'>` is not below `<'number2'>
+`e.g. $message_size is not above 10k`
+&&&
+
+The <'number'> arguments must expand to strings of digits, optionally followed
+by one of the letters K or M (upper case or lower case) which cause
+multiplication by 1024 and 1024x1024 respectively.
+
+
+Testing for significant deliveries
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+You can use the ^delivered^ condition to test whether or not any previously
+obeyed filter commands have set up a significant delivery. For example:
+
+ if not delivered then save mail/anomalous endif
+
+``Delivered'' is perhaps a poor choice of name for this condition, because the
+message has not actually been delivered; rather, a delivery has been set up for
+later processing.
+
+
+Testing for error messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+The condition ^error_message^ is true if the incoming message is a bounce
+(mail delivery error) message. Putting the command
+
+ if error_message then finish endif
+
+at the head of your filter file is a useful insurance against things going
+wrong in such a way that you cannot receive delivery error reports. *Note*:
+^error_message^ is a condition, not an expansion variable, and therefore is
+not preceded by `$`.
+
+
+Testing a list of addresses
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+There is a facility for looping through a list of addresses and applying a
+condition to each of them. It takes the form
+
+&&&
+`foranyaddress `<'string'>` (`<'condition'>`)`
+&&&
+
+where <'string'> is interpreted as a list of RFC 2822 addresses, as in a
+typical header line, and <'condition'> is any valid filter condition or
+combination of conditions. The ``group'' syntax that is defined for certain
+header lines that contain addresses is supported.
+
+The parentheses surrounding the condition are mandatory, to delimit it from
+possible further sub-conditions of the enclosing ^if^ command. Within the
+condition, the expansion variable $thisaddress$ is set to the non-comment
+portion of each of the addresses in the string in turn. For example, if the
+string is
+
+ B.Simpson <bart@sfld.example>, lisa@sfld.example (his sister)
+
+then $thisaddress$ would take on the values `bart@sfld.example` and
+`lisa@sfld.example` in turn.
+
+If there are no valid addresses in the list, the whole condition is false. If
+the internal condition is true for any one address, the overall condition is
+true and the loop ends. If the internal condition is false for all addresses in
+the list, the overall condition is false. This example tests for the presence
+of an eight-digit local part in any address in a 'To:' header:
+
+ if foranyaddress $h_to: ( $thisaddress matches ^\\d{8}@ ) then ...
+
+When the overall condition is true, the value of $thisaddress$ in the
+commands that follow ^then^ is the last value it took on inside the loop. At
+the end of the ^if^ command, the value of $thisaddress$ is reset to what it
+was before. It is best to avoid the use of multiple occurrences of
+^foranyaddress^, nested or otherwise, in a single ^if^ command, if the
+value of $thisaddress$ is to be used afterwards, because it isn't always
+clear what the value will be. Nested ^if^ commands should be used instead.
+
+Header lines can be joined together if a check is to be applied to more than
+one of them. For example:
+
+ if foranyaddress $h_to:,$h_cc: ....
+
+scans through the addresses in both the 'To:' and the 'Cc:' headers.
+
+
+[[SECTpersonal]]
+Testing for personal mail
+~~~~~~~~~~~~~~~~~~~~~~~~~
+A common requirement is to distinguish between incoming personal mail and mail
+from a mailing list, or from a robot or other automatic process (for example, a
+bounce message). In particular, this test is normally required for ``vacation
+messages''.
+
+The ^personal^ condition checks that the message is not a bounce message and
+that the current user's email address appears in the 'To:' header. It also
+checks that the sender is not the current user or one of a number of common
+daemons, and that there are no header lines starting 'List-' in the message.
+Finally, it checks the content of the 'Precedence:' header line, if there is
+one.
+
+You should always use the ^personal^ condition when generating automatic
+responses. This example shows the use of ^personal^ in a filter file that is
+sending out vacation messages:
+
+ if personal then
+ mail to $reply_address
+ subject "I am on holiday"
+ file $home/vacation/message
+ once $home/vacation/once
+ once_repeat 10d
+ endif
+
+It is tempting, when writing commands like the above, to quote the original
+subject in the reply. For example:
+
+ subject "Re: $h_subject:"
+
+There is a danger in doing this, however. It may allow a third party to
+subscribe you to an opt-in mailing list, provided that the list accepts bounce
+messages as subscription confirmations. (Messages sent from filters are always
+sent as bounce messages.) Well-managed lists require a non-bounce message to
+confirm a subscription, so the danger is relatively small.
+
+If prefixes or suffixes are in use for local parts -- something which depends
+on the configuration of Exim (see section <<SECTmbox>> below) -- the tests for
+the current user are done with the full address (including the prefix and
+suffix, if any) as well as with the prefix and suffix removed. If the system is
+configured to rewrite local parts of mail addresses, for example, to rewrite
+`dag46` as `Dirk.Gently`, the rewritten form of the address is also used in
+the tests.
+
+
+
+Alias addresses for the personal condition
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+It is quite common for people who have mail accounts on a number of different
+systems to forward all their mail to one system, and in this case a check for
+personal mail should test all their various mail addresses. To allow for this,
+the ^personal^ condition keyword can be followed by
+
+&&&
+`alias `<'address'>
+&&&
+
+any number of times, for example
+
+ if personal alias smith@else.where.example
+ alias jones@other.place.example
+ then ...
+
+The alias addresses are treated as alternatives to the current user's email
+address when testing the contents of header lines.
+
+
+Details of the personal condition
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The basic ^personal^ test is roughly equivalent to the following:
+
+ not error_message and
+ $message_headers does not contain "\nList-" and
+ $header_auto-submitted: does not contain "auto-" and
+ $header_precedence: does not contain "bulk" and
+ $header_precedence: does not contain "list" and
+ $header_precedence: does not contain "junk" and
+ foranyaddress $header_to:
+ ( $thisaddress contains "$local_part$domain" ) and
+ not foranyaddress $header_from:
+ (
+ $thisaddress contains "$local_partdomain" or
+ $thisaddress contains "server" or
+ $thisaddress contains "daemon" or
+ $thisaddress contains "root" or
+ $thisaddress contains "listserv" or
+ $thisaddress contains "majordomo" or
+ $thisaddress contains "-request" or
+ $thisaddress matches "^owner-[^]+"
+ )
+
+The variable $local_part$ contains the local part of the mail address of
+the user whose filter file is being run -- it is normally your login id. The
+$domain$ variable contains the mail domain. As explained above, if aliases
+or rewriting are defined, or if prefixes or suffixes are in use, the tests for
+the current user are also done with alternative addresses.
+
+
+
+
+Testing delivery status
+~~~~~~~~~~~~~~~~~~~~~~~
+There are two conditions that are intended mainly for use in system filter
+files, but which are available in users' filter files as well. The condition
+^first_delivery^ is true if this is the first process that is attempting to
+deliver the message, and false otherwise. This indicator is not reset until the
+first delivery process successfully terminates; if there is a crash or a power
+failure (for example), the next delivery attempt is also a ``first delivery''.
+
+In a user filter file ^first_delivery^ will be false if there was previously an
+error in the filter, or if a delivery for the user failed owing to, for
+example, a quota error, or if forwarding to a remote address was deferred for
+some reason.
+
+The condition ^manually_thawed^ is true if the message was ``frozen'' for some
+reason, and was subsequently released by the system administrator. It is
+unlikely to be of use in users' filter files.
+
+
+[[SECTmbox]]
+Multiple personal mailboxes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The system administrator can configure Exim so that users can set up variants
+on their email addresses and handle them separately. Consult your system
+administrator or local documentation to see if this facility is enabled on your
+system, and if so, what the details are.
+
+The facility involves the use of a prefix or a suffix on an email address. For
+example, all mail addressed to 'lg303-'<'something'> would be the property of
+user 'lg303', who could determine how it was to be handled, depending on the
+value of <'something'>.
+
+There are two possible ways in which this can be set up. The first possibility
+is the use of multiple '.forward' files. In this case, mail to 'lg303-foo',
+for example, is handled by looking for a file called _.forward-foo_ in
+'lg303'{ap}s home directory. If such a file does not exist, delivery fails and the
+message is returned to its sender.
+
+The alternative approach is to pass all messages through a single _.forward_
+file, which must be a filter file so that it can distinguish between the
+different cases by referencing the variables $local_part_prefix$ or
+$local_part_suffix$, as in the final example in section <<SECTex>> below.
+
+It is possible to configure Exim to support both schemes at once. In this case,
+a specific _.forward-foo_ file is first sought; if it is not found, the basic
+_.forward_ file is used.
+
+The ^personal^ test (see section <<SECTpersonal>>) includes prefixes and
+suffixes in its checking.
+
+
+
+Ignoring delivery errors
+~~~~~~~~~~~~~~~~~~~~~~~~
+As was explained above, filtering just sets up addresses for delivery -- no
+deliveries are actually done while a filter file is active. If any of the
+generated addresses subsequently suffers a delivery failure, an error message
+is generated in the normal way. However, if a filter command that sets up a
+delivery is preceded by the word ^noerror^, errors for that delivery,
+'and any deliveries consequent on it' (that is, from alias, forwarding, or
+filter files it invokes) are ignored.
+
+
+
+[[SECTex]]
+Examples of Exim filter commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Simple forwarding:
+
+ # Exim filter
+ deliver baggins@rivendell.middle-earth.example
+
+Vacation handling using traditional means, assuming that the _.vacation.msg_
+and other files have been set up in your home directory:
+
+ # Exim filter
+ unseen pipe "/usr/ucb/vacation \"$local_part\""
+
+Vacation handling inside Exim, having first created a file called
+_.vacation.msg_ in your home directory:
+
+ # Exim filter
+ if personal then vacation endif
+
+File some messages by subject:
+
+ # Exim filter
+ if $header_subject: contains "empire" or
+ $header_subject: contains "foundation"
+ then
+ save $home/mail/f+e
+ endif
+
+Save all non-urgent messages by weekday:
+
+ # Exim filter
+ if $header_subject: does not contain "urgent" and
+ $tod_full matches "^(...),"
+ then
+ save $home/mail/$1
+ endif
+
+Throw away all mail from one site, except from postmaster:
+
+ # Exim filter
+ if $reply_address contains "@spam.site.example" and
+ $reply_address does not contain "postmaster@"
+ then
+ seen finish
+ endif
+
+Handle multiple personal mailboxes
+
+ # Exim filter
+ if $local_part_suffix is "-foo"
+ then
+ save $home/mail/foo
+ elif $local_part_suffix is "-bar"
+ then
+ save $home/mail/bar
+ endif
+
+
diff --git a/doc/doc-docbook/spec.ascd b/doc/doc-docbook/spec.ascd
new file mode 100644
index 000000000..88b6440b5
--- /dev/null
+++ b/doc/doc-docbook/spec.ascd
@@ -0,0 +1,33111 @@
+////////////////////////////////////////////////////////////////////////////
+$Cambridge: exim/doc/doc-docbook/spec.ascd,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+This is the primary source of the Exim Manual. It is an AsciiDoc document
+that is converted into DocBook XML for subsequent conversion into printing
+and online formats. The markup used herein is traditional AsciiDoc markup,
+with some extras. The markup is summarized in a file called AdMarkup.txt. A
+private AsciiDoc configuration file specifies how the extra markup is to be
+translated into DocBook XML. You MUST use this private AsciiDoc markup if you
+want to get sensible results from processing this document.
+////////////////////////////////////////////////////////////////////////////
+
+
+
+////////////////////////////////////////////////////////////////////////////
+I am abusing the <abstract> DocBook element as the only trivial way of getting
+this information onto the title verso page in the printed renditions. A better
+title page would be a useful improvement. The <abstract> element is removed by
+preprocessing for the HTML renditions, and the whole <docbookinfo> element is
+removed for ascii output formats.
+////////////////////////////////////////////////////////////////////////////
+
+Specification of the Exim Mail Transfer Agent
+=============================================
+:abstract: University of Cambridge Computing Service, New Museums Site, Pembroke Street, Cambridge CB2 3QH, England
+:author: Philip Hazel
+:copyright: University of Cambridge
+:cpyear: 2005
+:date: 13 May 2005
+:doctitleabbrev: The Exim MTA
+:revision: 4.50
+
+
+//////////////////////////////////////////////////////////////////////////////
+***WARNING*** Do not put anything, not even a titleabbrev, setting before
+the first chapter (luckily it does not need one) because if you do, AsciiDoc
+creates an empty <preface> element, which we do not want.
+//////////////////////////////////////////////////////////////////////////////
+
+Introduction
+------------
+
+////////////////////////////////////////////////////////////////////////////
+These are definitions of AsciiDoc "attributes" that are in effect "variables"
+whose values can be substituted. The first makes index entries shorter. The
+second avoids problems with literal asterisks getting tangled up with bold
+emphasis quotes. The others are here for convenience of editing.
+
+***WARNING*** The positioning of these definitions, after the first Chapter
+title, seems to be important. If they are placed earlier, they give rise to
+incorrect XML.
+////////////////////////////////////////////////////////////////////////////
+
+:ACL: access control lists (ACLs)
+:star: *
+:previousversion: 4.40
+:version: 4.50
+
+
+////////////////////////////////////////////////////////////////////////////
+This chunk of literal XML implements index entries of the form "x, see y" and
+"x, see also y". It didn't seem worth inventing AsciiDoc markup for this,
+because is it not something that is likely to change often.
+////////////////////////////////////////////////////////////////////////////
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+<indexterm role="concept">
+ <primary>$1, $2, etc.</primary>
+ <see><emphasis>numerical variables</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>address</primary>
+ <secondary>rewriting</secondary>
+ <see><emphasis>rewriting</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>CR character</primary>
+ <see><emphasis>carriage return</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>CRL</primary>
+ <see><emphasis>certificate revocation list</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>delivery</primary>
+ <secondary>failure report</secondary>
+ <see><emphasis>bounce message</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>dialup</primary>
+ <see><emphasis>intermittently connected hosts</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>exiscan</primary>
+ <see><emphasis>content scanning</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>failover</primary>
+ <see><emphasis>fallback</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>fallover</primary>
+ <see><emphasis>fallback</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>filter</primary>
+ <secondary>Sieve</secondary>
+ <see><emphasis>Sieve filter</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>ident</primary>
+ <see><emphasis>RFC 1413</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>LF character</primary>
+ <see><emphasis>linefeed</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>maximum</primary>
+ <see><emphasis>limit</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>no_<emphasis>xxx</emphasis></primary>
+ <see>entry for xxx</see>
+</indexterm>
+<indexterm role="concept">
+ <primary>NUL</primary>
+ <see><emphasis>binary zero</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>passwd file</primary>
+ <see><emphasis>/etc/passwd</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>process id</primary>
+ <see><emphasis>pid</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>RBL</primary>
+ <see><emphasis>DNS list</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>redirection</primary>
+ <see><emphasis>address redirection</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>return path</primary>
+ <seealso><emphasis>envelope sender</emphasis></seealso>
+</indexterm>
+<indexterm role="concept">
+ <primary>scanning</primary>
+ <see><emphasis>content scanning</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>SSL</primary>
+ <see><emphasis>TLS</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>string</primary>
+ <secondary>expansion</secondary>
+ <see><emphasis>expansion</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>top bit</primary>
+ <see><emphasis>8-bit characters</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>variables</primary>
+ <see><emphasis>expansion, variables</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>zero, binary</primary>
+ <see><emphasis>binary zero</emphasis></see>
+</indexterm>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+
+////////////////////////////////////////////////////////////////////////////
+OK, now we start with the real data for this first chapter.
+////////////////////////////////////////////////////////////////////////////
+
+Exim is a mail transfer agent (MTA) for hosts that are running Unix or
+Unix-like operating systems. It was designed on the assumption that it would be
+run on hosts that are permanently connected to the Internet. However, it can be
+used on intermittently connected hosts with suitable configuration adjustments.
+
+Configuration files currently exist for the following operating systems: AIX,
+BSD/OS (aka BSDI), Darwin (Mac OS X), DGUX, FreeBSD, GNU/Hurd, GNU/Linux,
+HI-OSF (Hitachi), HP-UX, IRIX, MIPS RISCOS, NetBSD, OpenBSD, QNX, SCO, SCO
+SVR4.2 (aka UNIX-SV), Solaris (aka SunOS5), SunOS4, Tru64-Unix (formerly
+Digital UNIX, formerly DEC-OSF1), Ultrix, and Unixware. Some of these operating
+systems are no longer current and cannot easily be tested, so the configuration
+files may no longer work in practice.
+
+There are also configuration files for compiling Exim in the Cygwin environment
+that can be installed on systems running Windows. However, this document does
+not contain any information about running Exim in the Cygwin environment.
+
+The terms and conditions for the use and distribution of Exim are contained in
+the file _NOTICE_. Exim is distributed under the terms of the GNU General
+Public Licence, a copy of which may be found in the file _LICENCE_.
+
+The use, supply or promotion of Exim for the purpose of sending bulk,
+unsolicited electronic mail is incompatible with the basic aims of the program,
+which revolve around the free provision of a service that enhances the quality
+of personal communications. The author of Exim regards indiscriminate
+mass-mailing as an antisocial, irresponsible abuse of the Internet.
+
+Exim owes a great deal to Smail 3 and its author, Ron Karr. Without the
+experience of running and working on the Smail 3 code, I could never have
+contemplated starting to write a new MTA. Many of the ideas and user interfaces
+were originally taken from Smail 3, though the actual code of Exim is entirely
+new, and has developed far beyond the initial concept.
+
+Many people, both in Cambridge and around the world, have contributed to the
+development and the testing of Exim, and to porting it to various operating
+systems. I am grateful to them all. The distribution now contains a file called
+_ACKNOWLEDGMENTS_, in which I have started recording the names of
+contributors.
+
+
+
+Exim documentation
+~~~~~~~~~~~~~~~~~~
+[revisionflag="changed"]
+cindex:[documentation]
+This edition of the Exim specification applies to version {version} of Exim.
+Substantive changes from the {previousversion} edition are marked in some
+renditions of the document; this paragraph is so marked if the rendition is
+capable of showing a change indicator.
+
+This document is very much a reference manual; it is not a tutorial. The reader
+is expected to have some familiarity with the SMTP mail transfer protocol and
+with general Unix system administration. Although there are some discussions
+and examples in places, the information is mostly organized in a way that makes
+it easy to look up, rather than in a natural order for sequential reading.
+Furthermore, the manual aims to cover every aspect of Exim in detail, including
+a number of rarely-used, special-purpose features that are unlikely to be of
+very wide interest.
+
+cindex:[books about Exim]
+An ``easier'' discussion of Exim which provides more in-depth explanatory,
+introductory, and tutorial material can be found in a book entitled
+'The Exim SMTP Mail Server', published by UIT Cambridge
+(*http://www.uit.co.uk/exim-book/[]*).
+
+This book also contains a chapter that gives a general introduction to SMTP and
+Internet mail. Inevitably, however, the book is unlikely to be fully up-to-date
+with the latest release of Exim. (Note that the earlier book about Exim,
+published by O'Reilly, covers Exim 3, and many things have changed in Exim 4.)
+
+cindex:[_doc/NewStuff_]
+cindex:[_doc/ChangeLog_]
+cindex:[change log]
+As the program develops, there may be features in newer versions that have not
+yet made it into this document, which is updated only when the most significant
+digit of the fractional part of the version number changes. Specifications of
+new features that are not yet in this manual are placed in the file
+_doc/NewStuff_ in the Exim distribution.
+
+Some features may be classified as ``experimental''. These may change
+incompatibly while they are developing, or even be withdrawn. For this reason,
+they are not documented in this manual. Information about experimental features
+can be found in the file _doc/experimental.txt_.
+
+All changes to the program (whether new features, bug fixes, or other kinds of
+change) are noted briefly in the file called _doc/ChangeLog_.
+
+cindex:[_doc/spec.txt_]
+This specification itself is available as an ASCII file in _doc/spec.txt_ so
+that it can easily be searched with a text editor. Other files in the _doc_
+directory are:
+
+[frame="none"]
+`--------------------`------------------------------------------
+_OptionLists.txt_ list of all options in alphabetical order
+_dbm.discuss.txt_ discussion about DBM libraries
+_exim.8_ a man page of Exim's command line options
+_experimental.txt_ documentation of experimental features
+_filter.txt_ specification of the filter language
+_pcrepattern.txt_ specification of PCRE regular expressions
+_pcretest.txt_ specification of the PCRE testing program
+_Exim3.upgrade_ upgrade notes from release 2 to release 3
+_Exim4.upgrade_ upgrade notes from release 3 to release 4
+----------------------------------------------------------------
+
+The main specification and the specification of the filtering language are also
+available in other formats (HTML, PostScript, PDF, and Texinfo). Section
+<<SECTavail>> below tells you how to get hold of these.
+
+
+
+FTP and web sites
+~~~~~~~~~~~~~~~~~
+cindex:[web site]
+cindex:[FTP site]
+The primary distribution site for Exim is currently the University of
+Cambridge's FTP site, whose contents are described in 'Where to find the Exim
+distribution' below. In addition, there is a web site and an FTP site at
+%exim.org%. These are now also hosted at the University of Cambridge. The
+%exim.org% site was previously hosted for a number of years by Energis Squared,
+formerly Planet Online Ltd, whose support I gratefully acknowledge.
+
+As well as Exim distribution tar files, the Exim web site contains a number of
+differently formatted versions of the documentation, including the
+cindex:[FAQ] FAQ in both text and HTML formats. The HTML version comes with
+a keyword-in-context index. A recent addition to the online information is the
+cindex:[wiki]
+Exim wiki (*http://www.exim.org/eximwiki/[]*).
+We hope that this will make it easier for Exim users to contribute examples,
+tips, and know-how for the benefit of others.
+
+
+
+Mailing lists
+~~~~~~~~~~~~~
+cindex:[mailing lists,for Exim users]
+The following are the three main Exim mailing lists:
+
+[frame="none"]
+`-------------------------------`----------------------------------------
+'exim-users@exim.org' general discussion list
+'exim-dev@exim.org' discussion of bugs, enhancements, etc.
+'exim-announce@exim.org' moderated, low volume announcements list
+-------------------------------------------------------------------------
+
+You can subscribe to these lists, change your existing subscriptions, and view
+or search the archives via the mailing lists link on the Exim home page. The
+'exim-users' mailing list is also forwarded to
+*http://www.egroups.com/list/exim-users[]*, an archiving system with searching
+capabilities.
+
+
+Exim training
+~~~~~~~~~~~~~
+cindex:[training courses]
+From time to time (approximately annually at the time of writing),
+lecture-based training courses are run by the author of Exim in Cambridge, UK.
+Details can be found on the web site
+*http://www-tus.csx.cam.ac.uk/courses/exim/[]*.
+
+
+Bug reports
+~~~~~~~~~~~
+cindex:[bug reports]
+cindex:[reporting bugs]
+Reports of obvious bugs should be emailed to 'bugs@exim.org'. However, if
+you are unsure whether some behaviour is a bug or not, the best thing to do is
+to post a message to the 'exim-users' mailing list and have it discussed.
+
+
+
+[[SECTavail]]
+Where to find the Exim distribution
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[FTP site]
+cindex:[distribution,ftp site]
+The master ftp site for the Exim distribution is
+
+&&&
+*ftp://ftp.csx.cam.ac.uk/pub/software/email/exim[]*
+&&&
+
+This is mirrored by
+
+&&&
+*ftp://ftp.exim.org/pub/exim[]*
+&&&
+
+The file references that follow are relative to the _exim_ directories at these
+sites. There are now quite a number of independent mirror sites around the
+world. Those that I know about are listed in the file called _Mirrors_.
+
+Within the _exim_ directory there are subdirectories called _exim3_ (for
+previous Exim 3 distributions), _exim4_ (for the latest Exim 4
+distributions), and _Testing_ for testing versions. In the _exim4_
+subdirectory, the current release can always be found in files called
+
+&&&
+_exim-n.nn.tar.gz_
+_exim-n.nn.tar.bz2_
+&&&
+
+where 'n.nn' is the highest such version number in the directory. The two
+files contain identical data; the only difference is the type of compression.
+The _.bz2_ file is usually a lot smaller than the _.gz_ file.
+
+cindex:[distribution,signing details]
+cindex:[distribution,public key]
+cindex:[public key for signed distribution]
+The distributions are currently signed with Philip Hazel's GPG key. The
+corresponding public key is available from a number of keyservers, and there is
+also a copy in the file _Public-Key_. The signatures for the tar bundles are
+in:
+
+&&&
+_exim-n.nn.tar.gz.sig_
+_exim-n.nn.tar.bz2.sig_
+&&&
+
+For each released version, the log of changes is made separately available in a
+separate file in the directory _ChangeLogs_ so that it is possible to
+find out what has changed without having to download the entire distribution.
+
+cindex:[documentation,available formats]
+The main distribution contains ASCII versions of this specification and other
+documentation; other formats of the documents are available in separate files
+inside the _exim4_ directory of the FTP site:
+
+&&&
+_exim-html-n.nn.tar.gz_
+_exim-pdf-n.nn.tar.gz_
+_exim-postscript-n.nn.tar.gz_
+_exim-texinfo-n.nn.tar.gz_
+&&&
+
+These tar files contain only the _doc_ directory, not the complete
+distribution, and are also available in _.bz2_ as well as _.gz_ forms.
+cindex:[FAQ]
+The FAQ is available for downloading in two different formats in these files:
+
+&&&
+_exim4/FAQ.txt.gz_
+_exim4/FAQ.html.tar.gz_
+&&&
+
+The first of these is a single ASCII file that can be searched with a text
+editor. The second is a directory of HTML files, normally accessed by starting
+at _index.html_. The HTML version of the FAQ (which is also included in the
+HTML documentation tarbundle) includes a keyword-in-context index, which is
+often the most convenient way of finding your way around.
+
+
+Wish list
+~~~~~~~~~
+cindex:[wish list]
+A wish list is maintained, containing ideas for new features that have been
+submitted. From time to time the file is exported to the ftp site into the file
+_exim4/WishList_. Items are removed from the list if they get implemented.
+
+
+
+Contributed material
+~~~~~~~~~~~~~~~~~~~~
+cindex:[contributed material]
+At the ftp site, there is a directory called _Contrib_ that contains
+miscellaneous files contributed to the Exim community by Exim users. There is
+also a collection of contributed configuration examples in
+_exim4/config.samples.tar.gz_. These samples are referenced from the FAQ.
+
+
+
+Limitations
+~~~~~~~~~~~
+- cindex:[limitations of Exim]
+Exim is designed for use as an Internet MTA, and therefore handles addresses
+in RFC 2822 domain format only.
+cindex:[bang paths,not handled by Exim]
+It cannot handle UUCP ``bang paths'', though simple two-component bang paths can
+be converted by a straightforward rewriting configuration. This restriction
+does not prevent Exim from being interfaced to UUCP as a transport mechanism,
+provided that domain addresses are used.
+
+- cindex:[domainless addresses]
+cindex:[address,without domain]
+Exim insists that every address it handles has a domain attached. For incoming
+local messages, domainless addresses are automatically qualified with a
+configured domain value. Configuration options specify from which remote
+systems unqualified addresses are acceptable. These are then qualified on
+arrival.
+
+- cindex:[transport,external]
+cindex:[external transports]
+The only external transport currently implemented is an SMTP transport over a
+TCP/IP network (using sockets, including support for IPv6). However, a pipe
+transport is available, and there are facilities for writing messages to files
+and pipes, optionally in 'batched SMTP' format; these facilities can be used
+to send messages to some other transport mechanism such as UUCP, provided it
+can handle domain-style addresses. Batched SMTP input is also catered for.
+
+- Exim is not designed for storing mail for dial-in hosts. When the volumes of
+such mail are large, it is better to get the messages ``delivered'' into files
+(that is, off Exim's queue) and subsequently passed on to the dial-in hosts by
+other means.
+
+- Although Exim does have basic facilities for scanning incoming messages, these
+are not comprehensive enough to do full virus or spam scanning. Such operations
+are best carried out using additional specialized software packages. If you
+compile Exim with the content-scanning extension, straightforward interfaces to
+a number of common scanners are provided.
+
+
+
+
+
+Run time configuration
+~~~~~~~~~~~~~~~~~~~~~~
+Exim's run time configuration is held in a single text file that is divided
+into a number of sections. The entries in this file consist of keywords and
+values, in the style of Smail 3 configuration files. A default configuration
+file which is suitable for simple online installations is provided in the
+distribution, and is described in chapter <<CHAPdefconfil>> below.
+
+
+
+Calling interface
+~~~~~~~~~~~~~~~~~
+cindex:[Sendmail compatibility,command line interface]
+Like many MTAs, Exim has adopted the Sendmail command line interface so that it
+can be a straight replacement for _/usr/lib/sendmail_ or
+_/usr/sbin/sendmail_ when sending mail, but you do not need to know anything
+about Sendmail in order to run Exim. For actions other than sending messages,
+Sendmail-compatible options also exist, but those that produce output (for
+example, %-bp%, which lists the messages on the queue) do so in Exim's own
+format. There are also some additional options that are compatible with Smail
+3, and some further options that are new to Exim. Chapter <<CHAPcommandline>>
+documents all Exim's command line options. This information is automatically
+made into the man page that forms part of the Exim distribution.
+
+Control of messages on the queue can be done via certain privileged command
+line options. There is also an optional monitor program called 'eximon', which
+displays current information in an X window, and which contains a menu
+interface to Exim's command line administration options.
+
+
+
+Terminology
+~~~~~~~~~~~
+cindex:[terminology definitions]
+cindex:[body of message,definition of]
+The 'body' of a message is the actual data that the sender wants to transmit.
+It is the last part of a message, and is separated from the 'header' (see
+below) by a blank line.
+
+cindex:[bounce message,definition of]
+When a message cannot be delivered, it is normally returned to the sender in a
+delivery failure message or a ``non-delivery report'' (NDR). The term 'bounce'
+is commonly used for this action, and the error reports are often called
+'bounce messages'. This is a convenient shorthand for ``delivery failure error
+report''. Such messages have an empty sender address in the message's
+'envelope' (see below) to ensure that they cannot themselves give rise to
+further bounce messages.
+
+The term 'default' appears frequently in this manual. It is used to qualify a
+value which is used in the absence of any setting in the configuration. It may
+also qualify an action which is taken unless a configuration setting specifies
+otherwise.
+
+The term 'defer' is used when the delivery of a message to a specific
+destination cannot immediately take place for some reason (a remote host may be
+down, or a user's local mailbox may be full). Such deliveries are 'deferred'
+until a later time.
+
+The word 'domain' is sometimes used to mean all but the first component of a
+host's name. It is 'not' used in that sense here, where it normally
+refers to the part of an email address following the @ sign.
+
+cindex:[envelope, definition of]
+cindex:[sender,definition of]
+A message in transit has an associated 'envelope', as well as a header and a
+body. The envelope contains a sender address (to which bounce messages should
+be delivered), and any number of recipient addresses. References to the
+sender or the recipients of a message usually mean the addresses in the
+envelope. An MTA uses these addresses for delivery, and for returning bounce
+messages, not the addresses that appear in the header lines.
+
+cindex:[message header, definition of]
+cindex:[header section,definition of]
+The 'header' of a message is the first part of a message's text, consisting
+of a number of lines, each of which has a name such as 'From:', 'To:',
+'Subject:', etc. Long header lines can be split over several text lines by
+indenting the continuations. The header is separated from the body by a blank
+line.
+
+cindex:[local part,definition of]
+cindex:[domain,definition of]
+The term 'local part', which is taken from RFC 2822, is used to refer to that
+part of an email address that precedes the @ sign. The part that follows the
+@ sign is called the 'domain' or 'mail domain'.
+
+cindex:[local delivery,definition of]
+cindex:[remote delivery, definition of]
+The terms 'local delivery' and 'remote delivery' are used to distinguish
+delivery to a file or a pipe on the local host from delivery by SMTP over
+TCP/IP to a remote host.
+
+cindex:[return path,definition of]
+'Return path' is another name that is used for the sender address in a
+message's envelope.
+
+cindex:[queue,definition of]
+The term 'queue' is used to refer to the set of messages awaiting delivery,
+because this term is in widespread use in the context of MTAs. However, in
+Exim's case the reality is more like a pool than a queue, because there is
+normally no ordering of waiting messages.
+
+cindex:[queue runner,definition of]
+The term 'queue runner' is used to describe a process that scans the queue
+and attempts to deliver those messages whose retry times have come. This term
+is used by other MTAs, and also relates to the command %runq%, but in Exim
+the waiting messages are normally processed in an unpredictable order.
+
+cindex:[spool directory,definition of]
+The term 'spool directory' is used for a directory in which Exim keeps the
+messages on its queue -- that is, those that it is in the process of
+delivering. This should not be confused with the directory in which local
+mailboxes are stored, which is called a ``spool directory'' by some people. In
+the Exim documentation, ``spool'' is always used in the first sense.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+Incorporated code
+-----------------
+cindex:[incorporated code]
+cindex:[regular expressions,library]
+cindex:[PCRE]
+A number of pieces of external code are included in the Exim distribution.
+
+- Regular expressions are supported in the main Exim program and in the Exim
+monitor using the freely-distributable PCRE library, copyright (c) University
+of Cambridge. The source is distributed in the directory _src/pcre_. However,
+this is a cut-down version of PCRE. If you want to use the PCRE library in
+other programs, you should obtain and install the full version from
+*ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre[]*.
+
+- cindex:[cdb,acknowledgement]
+Support for the cdb (Constant DataBase) lookup method is provided by code
+contributed by Nigel Metheringham of (at the time he contributed it) Planet
+Online Ltd. which contains the following statements:
++
+Copyright (c) 1998 Nigel Metheringham, Planet Online Ltd
++
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
++
+This code implements Dan Bernstein's Constant DataBase (cdb) spec. Information,
+the spec and sample code for cdb can be obtained from
+*http://www.pobox.com/{tl}djb/cdb.html[]*. This implementation borrows some code
+from Dan Bernstein's implementation (which has no license restrictions applied
+to it).
++
+The implementation is completely contained within the code of Exim.
+It does not link against an external cdb library.
+
+- cindex:[SPA authentication]
+cindex:[Samba project]
+cindex:[Microsoft Secure Password Authentication]
+Client support for Microsoft's 'Secure Password Authentication' is provided
+by code contributed by Marc Prud'hommeaux. Server support was contributed by
+Tom Kistner. This includes code taken from the Samba project, which is released
+under the Gnu GPL.
+
+- cindex:[Cyrus]
+cindex:['pwcheck' daemon]
+cindex:['pwauthd' daemon]
+Support for calling the Cyrus 'pwcheck' and 'saslauthd' daemons is provided
+by code taken from the Cyrus-SASL library and adapted by Alexander S.
+Sabourenkov. The permission notice appears below, in accordance with the
+conditions expressed therein.
++
+Copyright (c) 2001 Carnegie Mellon University. All rights reserved.
++
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
++
+. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+
+. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in
+the documentation and/or other materials provided with the
+distribution.
+
+. The name ``Carnegie Mellon University'' must not be used to
+endorse or promote products derived from this software without
+prior written permission. For permission or any other legal
+details, please contact
++
+&&&
+Office of Technology Transfer
+Carnegie Mellon University
+5000 Forbes Avenue
+Pittsburgh, PA 15213-3890
+(412) 268-4387, fax: (412) 268-7395
+tech-transfer@andrew.cmu.edu
+&&&
+
+. Redistributions of any form whatsoever must retain the following
+acknowledgment:
++
+'This product includes software developed by Computing Services
+at Carnegie Mellon University (*http://www.cmu.edu/computing/[]*).'
++
+CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
+THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
+FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+. cindex:[monitor]
+cindex:[X-windows]
+cindex:[Athena]
+The Exim Monitor program, which is an X-Window application, includes
+modified versions of the Athena StripChart and TextPop widgets.
+This code is copyright by DEC and MIT, and their permission notice appears
+below, in accordance with the conditions expressed therein.
++
+Copyright 1987, 1988 by Digital Equipment Corporation, Maynard, Massachusetts,
+and the Massachusetts Institute of Technology, Cambridge, Massachusetts.
++
+All Rights Reserved
++
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the names of Digital or MIT not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
++
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+. Many people have contributed code fragments, some large, some small, that were
+not covered by any specific licence requirements. It is assumed that the
+contributors are happy to see their code incoporated into Exim under the GPL.
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[titleabbrev="Receiving and delivering mail"]
+How Exim receives and delivers mail
+-----------------------------------
+
+
+Overall philosophy
+~~~~~~~~~~~~~~~~~~
+cindex:[design philosophy]
+Exim is designed to work efficiently on systems that are permanently connected
+to the Internet and are handling a general mix of mail. In such circumstances,
+most messages can be delivered immediately. Consequently, Exim does not
+maintain independent queues of messages for specific domains or hosts, though
+it does try to send several messages in a single SMTP connection after a host
+has been down, and it also maintains per-host retry information.
+
+
+
+Policy control
+~~~~~~~~~~~~~~
+cindex:[policy control,overview]
+Policy controls are now an important feature of MTAs that are connected to the
+Internet. Perhaps their most important job is to stop MTAs being abused as
+``open relays'' by misguided individuals who send out vast amounts of unsolicited
+junk, and want to disguise its source. Exim provides flexible facilities for
+specifying policy controls on incoming mail:
+
+- cindex:[{ACL},introduction]
+Exim 4 (unlike previous versions of Exim) implements policy controls on
+incoming mail by means of 'Access Control Lists' (ACLs). Each list is a
+series of statements that may either grant or deny access. ACLs can be used at
+several places in the SMTP dialogue while receiving a message from a remote
+host. However, the most common places are after each RCPT command, and at
+the very end of the message. The sysadmin can specify conditions for accepting
+or rejecting individual recipients or the entire message, respectively, at
+these two points (see chapter <<CHAPACL>>). Denial of access results in an SMTP
+error code.
+
+- An ACL is also available for locally generated, non-SMTP messages. In this
+case, the only available actions are to accept or deny the entire message.
+
+- When Exim is compiled with the content-scanning extension, facilities are
+provided in the ACL mechanism for passing the message to external virus and/or
+spam scanning software. The result of such a scan is passed back to the ACL,
+which can then use it to decide what to do with the message.
+
+- When a message has been received, either from a remote host or from the local
+host, but before the final acknowledgement has been sent, a locally supplied C
+function called 'local_scan()' can be run to inspect the message and decide
+whether to accept it or not (see chapter <<CHAPlocalscan>>). If the message is
+accepted, the list of recipients can be modified by the function.
+
+- Using the 'local_scan()' mechanism is another way of calling external
+scanner software. The %SA-Exim% add-on package works this way. It does not
+require Exim to be compiled with the content-scanning extension.
+
+- After a message has been accepted, a further checking mechanism is available in
+the form of the 'system filter' (see chapter <<CHAPsystemfilter>>). This runs
+at the start of every delivery process.
+
+
+
+User filters
+~~~~~~~~~~~~
+cindex:[filter,introduction]
+cindex:[Sieve filter]
+In a conventional Exim configuration, users are able to run private filters by
+setting up appropriate _.forward_ files in their home directories. See
+chapter <<CHAPredirect>> (about the ^redirect^ router) for the configuration
+needed to support this, and the separate document entitled 'Exim's interfaces
+to mail filtering' for user details. Two different kinds of filtering are
+available:
+
+- Sieve filters are written in the standard filtering language that is defined
+by RFC 3028.
+
+- Exim filters are written in a syntax that is unique to Exim, but which is more
+powerful than Sieve, which it pre-dates.
+
+User filters are run as part of the routing process, described below.
+
+
+
+[[SECTmessiden]]
+Message identification
+~~~~~~~~~~~~~~~~~~~~~~
+cindex:[message ids, details of format]
+cindex:[format,of message id]
+cindex:[id of message]
+cindex:[base62]
+cindex:[base36]
+cindex:[Darwin]
+cindex:[Cygwin]
+Every message handled by Exim is given a 'message id' which is sixteen
+characters long. It is divided into three parts, separated by hyphens, for
+example `16VDhn-0001bo-D3`. Each part is a sequence of letters and digits,
+normally encoding numbers in base 62. However, in the Darwin operating
+system (Mac OS X) and when Exim is compiled to run under Cygwin, base 36
+(avoiding the use of lower case letters) is used instead, because the message
+id is used to construct file names, and the names of files in those systems are
+not case-sensitive.
+
+cindex:[pid (process id),re-use of]
+The detail of the contents of the message id have changed as Exim has evolved.
+Earlier versions relied on the operating system not re-using a process id (pid)
+within one second. On modern operating systems, this assumption can no longer
+be made, so the algorithm had to be changed. To retain backward compatibility,
+the format of the message id was retained, which is why the following rules are
+somewhat eccentric:
+
+- The first six characters of the message id are the time at which the message
+started to be received, to a granularity of one second. That is, this field
+contains the number of seconds since the start of the epoch (the normal Unix
+way of representing the date and time of day).
+
+- After the first hyphen, the next six characters are the id of the process that
+received the message.
+
+- There are two different possibilities for the final two characters:
+
+. cindex:[%localhost_number%]
+If %localhost_number% is not set, this value is the fractional part of the
+time of reception, normally in units of 1/2000 of a second, but for systems
+that must use base 36 instead of base 62 (because of case-insensitive file
+systems), the units are 1/1000 of a second.
+
+. If %localhost_number% is set, it is multiplied by 200 (100) and added to
+the fractional part of the time, which in this case is in units of 1/200
+(1/100) of a second.
+
+After a message has been received, Exim waits for the clock to tick at the
+appropriate resolution before proceeding, so that if another message is
+received by the same process, or by another process with the same (re-used)
+pid, it is guaranteed that the time will be different. In most cases, the clock
+will already have ticked while the message was being received.
+
+
+Receiving mail
+~~~~~~~~~~~~~~
+cindex:[receiving mail]
+cindex:[message,reception]
+The only way Exim can receive mail from a remote host is using SMTP over
+TCP/IP, in which case the sender and recipient addresses are tranferred using
+SMTP commands. However, from a locally running process (such as a user's MUA),
+there are several possibilities:
+
+- If the process runs Exim with the %-bm% option, the message is read
+non-interactively (usually via a pipe), with the recipients taken from the
+command line, or from the body of the message if %-t% is also used.
+
+- If the process runs Exim with the %-bS% option, the message is also read
+non-interactively, but in this case the recipients are listed at the start of
+the message in a series of SMTP RCPT commands, terminated by a DATA
+command. This is so-called ``batch SMTP'' format,
+but it isn't really SMTP. The SMTP commands are just another way of passing
+envelope addresses in a non-interactive submission.
+
+- If the process runs Exim with the %-bs% option, the message is read
+interactively, using the SMTP protocol. A two-way pipe is normally used for
+passing data between the local process and the Exim process.
+This is ``real'' SMTP and is handled in the same way as SMTP over TCP/IP. For
+example, the ACLs for SMTP commands are used for this form of submission.
+
+- A local process may also make a TCP/IP call to the host's loopback address
+(127.0.0.1) or any other of its IP addresses. When receiving messages, Exim
+does not treat the loopback address specially. It treats all such connections
+in the same way as connections from other hosts.
+
+
+cindex:[message sender, constructed by Exim]
+cindex:[sender,constructed by Exim]
+In the three cases that do not involve TCP/IP, the sender address is
+constructed from the login name of the user that called Exim and a default
+qualification domain (which can be set by the %qualify_domain% configuration
+option). For local or batch SMTP, a sender address that is passed using the
+SMTP MAIL command is ignored. However, the system administrator may allow
+certain users (``trusted users'') to specify a different sender address
+unconditionally, or all users to specify certain forms of different sender
+address. The %-f% option or the SMTP MAIL command is used to specify these
+different addresses. See section <<SECTtrustedadmin>> for details of trusted
+users, and the %untrusted_set_sender% option for a way of allowing untrusted
+users to change sender addresses.
+
+Messages received by either of the non-interactive mechanisms are subject to
+checking by the non-SMTP ACL, if one is defined. Messages received using SMTP
+(either over TCP/IP, or interacting with a local process) can be checked by a
+number of ACLs that operate at different times during the SMTP session. Either
+individual recipients, or the entire message, can be rejected if local policy
+requirements are not met. The 'local_scan()' function (see chapter
+<<CHAPlocalscan>>) is run for all incoming messages.
+
+Exim can be configured not to start a delivery process when a message is
+received; this can be unconditional, or depend on the number of incoming SMTP
+connections or the system load. In these situations, new messages wait on the
+queue until a queue runner process picks them up. However, in standard
+configurations under normal conditions, delivery is started as soon as a
+message is received.
+
+
+
+
+
+Handling an incoming message
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[spool directory,files that hold a message]
+cindex:[file,how a message is held]
+When Exim accepts a message, it writes two files in its spool directory. The
+first contains the envelope information, the current status of the message, and
+the header lines, and the second contains the body of the message. The names of
+the two spool files consist of the message id, followed by `-H` for the
+file containing the envelope and header, and `-D` for the data file.
+
+cindex:[spool directory,_input_ sub-directory]
+By default all these message files are held in a single directory called
+_input_ inside the general Exim spool directory. Some operating systems do
+not perform very well if the number of files in a directory gets very large; to
+improve performance in such cases, the %split_spool_directory% option can be
+used. This causes Exim to split up the input files into 62 sub-directories
+whose names are single letters or digits.
+
+The envelope information consists of the address of the message's sender and
+the addresses of the recipients. This information is entirely separate from
+any addresses contained in the header lines. The status of the message includes
+a list of recipients who have already received the message. The format of the
+first spool file is described in chapter <<CHAPspool>>.
+
+cindex:[rewriting,addresses]
+Address rewriting that is specified in the rewrite section of the configuration
+(see chapter <<CHAPrewrite>>) is done once and for all on incoming addresses,
+both in the header lines and the envelope, at the time the message is accepted.
+If during the course of delivery additional addresses are generated (for
+example, via aliasing), these new addresses are rewritten as soon as they are
+generated. At the time a message is actually delivered (transported) further
+rewriting can take place; because this is a transport option, it can be
+different for different forms of delivery. It is also possible to specify the
+addition or removal of certain header lines at the time the message is
+delivered (see chapters <<CHAProutergeneric>> and <<CHAPtransportgeneric>>).
+
+
+
+Life of a message
+~~~~~~~~~~~~~~~~~
+cindex:[message,life of]
+cindex:[message,frozen]
+A message remains in the spool directory until it is completely delivered to
+its recipients or to an error address, or until it is deleted by an
+administrator or by the user who originally created it. In cases when delivery
+cannot proceed -- for example, when a message can neither be delivered to its
+recipients nor returned to its sender, the message is marked ``frozen'' on the
+spool, and no more deliveries are attempted.
+
+cindex:[frozen messages,thawing]
+cindex:[message,thawing frozen]
+An administrator can ``thaw'' such messages when the problem has been corrected,
+and can also freeze individual messages by hand if necessary. In addition, an
+administrator can force a delivery error, causing a bounce message to be sent.
+
+cindex:[%auto_thaw%]
+There is an option called %auto_thaw%, which can be used to cause Exim to
+retry frozen messages after a certain time. When this is set, no message will
+remain on the queue for ever, because the delivery timeout will eventually be
+reached. Delivery failure reports (bounce messages) that reach this timeout are
+discarded.
+
+cindex:[%timeout_frozen_after%]
+There is also an option called %timeout_frozen_after%, which discards frozen
+messages after a certain time.
+
+cindex:[message,log file for]
+cindex:[log,file for each message]
+While Exim is working on a message, it writes information about each delivery
+attempt to the main log file. This includes successful, unsuccessful, and
+delayed deliveries for each recipient (see chapter <<CHAPlog>>). The log lines
+are also written to a separate 'message log' file for each message. These
+logs are solely for the benefit of the administrator, and are normally deleted
+along with the spool files when processing of a message is complete.
+The use of individual message logs can be disabled by setting
+%no_message_logs%; this might give an improvement in performance on very
+busy systems.
+
+cindex:[journal file]
+cindex:[file,journal]
+All the information Exim itself needs to set up a delivery is kept in the first
+spool file, along with the header lines. When a successful delivery occurs, the
+address is immediately written at the end of a journal file, whose name is the
+message id followed by `-J`. At the end of a delivery run, if there are some
+addresses left to be tried again later, the first spool file (the `-H` file)
+is updated to indicate which these are, and the journal file is then deleted.
+Updating the spool file is done by writing a new file and renaming it, to
+minimize the possibility of data loss.
+
+Should the system or the program crash after a successful delivery but before
+the spool file has been updated, the journal is left lying around. The next
+time Exim attempts to deliver the message, it reads the journal file and
+updates the spool file before proceeding. This minimizes the chances of double
+deliveries caused by crashes.
+
+
+
+[[SECTprocaddress]]
+Processing an address for delivery
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[drivers,definition of]
+cindex:[router,definition of]
+cindex:[transport,definition of]
+The main delivery processing elements of Exim are called 'routers' and
+'transports', and collectively these are known as 'drivers'. Code for a
+number of them is provided in the source distribution, and compile-time options
+specify which ones are included in the binary. Run time options specify which
+ones are actually used for delivering messages.
+
+cindex:[drivers,instance definition]
+Each driver that is specified in the run time configuration is an 'instance'
+of that particular driver type. Multiple instances are allowed; for example,
+you can set up several different ^smtp^ transports, each with different
+option values that might specify different ports or different timeouts. Each
+instance has its own identifying name. In what follows we will normally use the
+instance name when discussing one particular instance (that is, one specific
+configuration of the driver), and the generic driver name when discussing
+the driver's features in general.
+
+A 'router' is a driver that operates on an address, either determining how
+its delivery should happen, by routing it to a specific transport, or
+converting the address into one or more new addresses (for example, via an
+alias file). A router may also explicitly choose to fail an address, causing it
+to be bounced.
+
+A 'transport' is a driver that transmits a copy of the message from Exim's
+spool to some destination. There are two kinds of transport: for a 'local'
+transport, the destination is a file or a pipe on the local host, whereas for a
+'remote' transport the destination is some other host. A message is passed
+to a specific transport as a result of successful routing. If a message has
+several recipients, it may be passed to a number of different transports.
+
+cindex:[preconditions,definition of]
+An address is processed by passing it to each configured router instance in
+turn, subject to certain preconditions, until a router accepts the address or
+specifies that it should be bounced. We will describe this process in more
+detail shortly. As a simple example, the diagram below illustrates how each
+recipient address in a message is processed in a small configuration of three
+routers that are configured in various ways.
+
+To make this a more concrete example, we'll describe it in terms of some actual
+routers, but remember, this is only an example. You can configure Exim's
+routers in many different ways, and there may be any number of routers in a
+configuration.
+
+The first router that is specified in a configuration is often one that handles
+addresses in domains that are not recognized specially by the local host. These
+are typically addresses for arbitrary domains on the Internet. A precondition
+is set up which looks for the special domains known to the host (for example,
+its own domain name), and the router is run for addresses that do 'not'
+match. Typically, this is a router that looks up domains in the DNS in order to
+find the hosts to which this address routes. If it succeeds, the address is
+queued for a suitable SMTP transport; if it does not succeed, the router is
+configured to fail the address.
+
+///
+The example pictured could be a configuration of this type. The second and
+third routers can only be run for addresses for which the preconditions for
+the first router are not met. If one of these preconditions checks the
+domain, the second and third routers are run only for domains that are somehow
+special to the local host.
+///
+
+The second router does redirection -- also known as aliasing and forwarding.
+When it generates one or more new addresses from the original, each of them is
+routed independently from the start. Otherwise, the router may cause an address
+to fail, or it may simply decline to handle the address, in which case the
+address is passed to the next router.
+
+The final router in many configurations is one that checks to see if the
+address belongs to a local mailbox. The precondition may involve a check to
+see if the local part is the name of a login account, or it may look up the
+local part in a file or a database. If its preconditions are not met, or if
+the router declines, we have reached the end of the routers. When this happens,
+the address is bounced.
+
+
+
+Processing an address for verification
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[router,for verification]
+cindex:[verifying address, overview]
+As well as being used to decide how to deliver to an address, Exim's routers
+are also used for 'address verification'. Verification can be requested as
+one of the checks to be performed in an ACL for incoming messages, on both
+sender and recipient addresses, and it can be tested using the %-bv% and
+%-bvs% command line options.
+
+When an address is being verified, the routers are run in ``verify mode''. This
+does not affect the way the routers work, but it is a state that can be
+detected. By this means, a router can be skipped or made to behave differently
+when verifying. A common example is a configuration in which the first router
+sends all messages to a message-scanning program, unless they have been
+previously scanned. Thus, the first router accepts all addresses without any
+checking, making it useless for verifying. Normally, the %no_verify% option
+would be set for such a router, causing it to be skipped in verify mode.
+
+
+
+
+[[SECTrunindrou]]
+Running an individual router
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[router,running details]
+cindex:[preconditions,checking]
+cindex:[router,result of running]
+As explained in the example above, a number of preconditions are checked before
+running a router. If any are not met, the router is skipped, and the address is
+passed to the next router. When all the preconditions on a router 'are' met,
+the router is run. What happens next depends on the outcome, which is one of
+the following:
+
+- 'accept': The router accepts the address, and either queues it for a
+transport, or generates one or more ``child'' addresses. Processing the original
+address ceases,
+cindex:[%unseen% option]
+unless the %unseen% option is set on the router. This option
+can be used to set up multiple deliveries with different routing (for example,
+for keeping archive copies of messages). When %unseen% is set, the address is
+passed to the next router. Normally, however, an 'accept' return marks the
+end of routing.
++
+cindex:[case of local parts]
+cindex:[address duplicate, discarding]
+If child addresses are generated, Exim checks to see whether they are
+duplicates of any existing recipient addresses. During this check, local parts
+are treated as case-sensitive. Duplicate addresses are discarded. Each of the
+remaining child addresses is then processed independently, starting with the
+first router by default. It is possible to change this by setting the
+%redirect_router% option to specify which router to start at for child
+addresses. Unlike %pass_router% (see below) the router specified by
+%redirect_router% may be anywhere in the router configuration.
+
+- 'pass': The router recognizes the address, but cannot handle it itself. It
+requests that the address be passed to another router. By default the address
+is passed to the next router, but this can be changed by setting the
+%pass_router% option. However, (unlike %redirect_router%) the named router
+must be below the current router (to avoid loops).
+
+- 'decline': The router declines to accept the address because it does not
+recognize it at all. By default, the address is passed to the next router, but
+this can be prevented by setting the %no_more% option. When %no_more% is set,
+all the remaining routers are skipped.
+
+- 'fail': The router determines that the address should fail, and queues it for
+the generation of a bounce message. There is no further processing of the
+original address unless %unseen% is set on the router.
+
+- 'defer': The router cannot handle the address at the present time. (A database
+may be offline, or a DNS lookup may have timed out.) No further processing of
+the address happens in this delivery attempt. It is tried again next time the
+message is considered for delivery.
+
+- 'error': There is some error in the router (for example, a syntax error in
+its configuration). The action is as for defer.
+
+If an address reaches the end of the routers without having been accepted by
+any of them, it is bounced as unrouteable.
+The default error message in this situation is ``unrouteable address'', but you
+can set your own message by making use of the %cannot_route_message% option.
+This can be set for any router; the value from the last router that ``saw''
+the address is used.
+
+Sometimes while routing you want to fail a delivery when some conditions are
+met but others are not, instead of passing the address on for further routing.
+You can do this by having a second router that explicitly fails the delivery
+when the relevant conditions are met. The ^redirect^ router has a ``fail''
+facility for this purpose.
+
+
+
+
+[[SECTrouprecon]]
+Router preconditions
+~~~~~~~~~~~~~~~~~~~~
+cindex:[router preconditions, order of processing]
+cindex:[preconditions,order of processing]
+The preconditions that are tested for each router are listed below, in the
+order in which they are tested. The individual configuration options are
+described in more detail in chapter <<CHAProutergeneric>>.
+
+- The %local_part_prefix% and %local_part_suffix% options can specify that
+the local parts handled by the router may or must have certain prefixes and/or
+suffixes. If a mandatory affix (prefix or suffix) is not present, the router is
+skipped. These conditions are tested first. When an affix is present, it is
+removed from the local part before further processing, including the evaluation
+of any other conditions.
+
+- Routers can be designated for use only when not verifying an address, that is,
+only when routing it for delivery (or testing its delivery routing). If the
+%verify% option is set false, the router is skipped when Exim is verifying an
+address.
+Setting the %verify% option actually sets two options, %verify_sender% and
+%verify_recipient%, which independently control the use of the router for
+sender and recipient verification. You can set these options directly if
+you want a router to be used for only one type of verification.
+
+- If the %address_test% option is set false, the router is skipped when Exim is
+run with the %-bt% option to test an address routing. This can be helpful when
+the first router sends all new messages to a scanner of some sort; it makes it
+possible to use %-bt% to test subsequent delivery routing without having to
+simulate the effect of the scanner.
+
+- Routers can be designated for use only when verifying an address, as
+opposed to routing it for delivery. The %verify_only% option controls this.
+
+- Certain routers can be explicitly skipped when running the routers to check an
+address given in the SMTP EXPN command (see the %expn% option).
+
+- If the %domains% option is set, the domain of the address must be in the set of
+domains that it defines.
+
+- If the %local_parts% option is set, the local part of the address must be in
+the set of local parts that it defines. If %local_part_prefix% or
+%local_part_suffix% is in use, the prefix or suffix is removed from the local
+part before this check. If you want to do precondition tests on local parts
+that include affixes, you can do so by using a %condition% option (see below)
+that uses the variables $local_part$, $local_part_prefix$, and
+$local_part_suffix$ as necessary.
+
+- If the %check_local_user% option is set, the local part must be the name of
+an account on the local host.
+If this check succeeds, the uid and gid of the local user are placed in
+$local_user_uid$ and $local_user_gid$; these values can be used in the
+remaining preconditions.
+
+- If the %router_home_directory% option is set, it is expanded at this point,
+because it overrides the value of $home$. If this expansion were left till
+later, the value of $home$ as set by %check_local_user% would be used in
+subsequent tests. Having two different values of $home$ in the same router
+could lead to confusion.
+
+- If the %senders% option is set, the envelope sender address must be in the set
+of addresses that it defines.
+
+- If the %require_files% option is set, the existence or non-existence of
+specified files is tested.
+
+- cindex:[customizing,precondition]
+If the %condition% option is set, it is evaluated and tested. This option uses
+an expanded string to allow you to set up your own custom preconditions.
+Expanded strings are described in chapter <<CHAPexpand>>.
+
+
+Note that %require_files% comes near the end of the list, so you cannot use it
+to check for the existence of a file in which to lookup up a domain, local
+part, or sender. However, as these options are all expanded, you can use the
+%exists% expansion condition to make such tests within each condition. The
+%require_files% option is intended for checking files that the router may be
+going to use internally, or which are needed by a specific transport (for
+example, _.procmailrc_).
+
+
+
+Delivery in detail
+~~~~~~~~~~~~~~~~~~
+cindex:[delivery,in detail]
+When a message is to be delivered, the sequence of events is as follows:
+
+- If a system-wide filter file is specified, the message is passed to it. The
+filter may add recipients to the message, replace the recipients, discard the
+message, cause a new message to be generated, or cause the message delivery to
+fail. The format of the system filter file is the same as for Exim user filter
+files, described in the separate document entitled
+'Exim's interfaces to mail filtering'.
+cindex:[Sieve filter,not available for system filter]
+(*Note*: Sieve cannot be used for system filter files.)
++
+Some additional features are available in system filters -- see chapter
+<<CHAPsystemfilter>> for details. Note that a message is passed to the system
+filter only once per delivery attempt, however many recipients it has. However,
+if there are several delivery attempts because one or more addresses could not
+be immediately delivered, the system filter is run each time. The filter
+condition %first_delivery% can be used to detect the first run of the system
+filter.
+
+- Each recipient address is offered to each configured router in turn, subject
+to its preconditions, until one is able to handle it. If no router can handle
+the address, that is, if they all decline, the address is failed. Because
+routers can be targeted at particular domains, several locally handled domains
+can be processed entirely independently of each other.
+
+- cindex:[routing,loops in]
+cindex:[loop,while routing]
+A router that accepts an address may set up a local or a remote transport for
+it. However, the transport is not run at this time. Instead, the address is
+placed on a list for the particular transport, to be run later. Alternatively,
+the router may generate one or more new addresses (typically from alias,
+forward, or filter files). New addresses are fed back into this process from
+the top, but in order to avoid loops, a router ignores any address which has an
+identically-named ancestor that was processed by itself.
+
+- When all the routing has been done, addresses that have been successfully
+handled are passed to their assigned transports. When local transports are
+doing real local deliveries, they handle only one address at a time, but if a
+local transport is being used as a pseudo-remote transport (for example, to
+collect batched SMTP messages for transmission by some other means) multiple
+addresses can be handled. Remote transports can always handle more than one
+address at a time, but can be configured not to do so, or to restrict multiple
+addresses to the same domain.
+
+- Each local delivery to a file or a pipe runs in a separate process under a
+non-privileged uid, and these deliveries are run one at a time. Remote
+deliveries also run in separate processes, normally under a uid that is private
+to Exim (``the Exim user''), but in this case, several remote deliveries can be
+run in parallel. The maximum number of simultaneous remote deliveries for any
+one message is set by the %remote_max_parallel% option.
+The order in which deliveries are done is not defined, except that all local
+deliveries happen before any remote deliveries.
+
+- cindex:[queue runner]
+When it encounters a local delivery during a queue run, Exim checks its retry
+database to see if there has been a previous temporary delivery failure for the
+address before running the local transport. If there was a previous failure,
+Exim does not attempt a new delivery until the retry time for the address is
+reached. However, this happens only for delivery attempts that are part of a
+queue run. Local deliveries are always attempted when delivery immediately
+follows message reception, even if retry times are set for them. This makes for
+better behaviour if one particular message is causing problems (for example,
+causing quota overflow, or provoking an error in a filter file).
+
+- cindex:[delivery,retry in remote transports]
+Remote transports do their own retry handling, since an address may be
+deliverable to one of a number of hosts, each of which may have a different
+retry time. If there have been previous temporary failures and no host has
+reached its retry time, no delivery is attempted, whether in a queue run or
+not. See chapter <<CHAPretry>> for details of retry strategies.
+
+- If there were any permanent errors, a bounce message is returned to an
+appropriate address (the sender in the common case), with details of the error
+for each failing address. Exim can be configured to send copies of bounce
+messages to other addresses.
+
+- cindex:[delivery,deferral]
+If one or more addresses suffered a temporary failure, the message is left on
+the queue, to be tried again later. Delivery of these addresses is said to be
+'deferred'.
+
+- When all the recipient addresses have either been delivered or bounced,
+handling of the message is complete. The spool files and message log are
+deleted, though the message log can optionally be preserved if required.
+
+
+
+
+Retry mechanism
+~~~~~~~~~~~~~~~
+cindex:[delivery,retry mechanism]
+cindex:[retry,description of mechanism]
+cindex:[queue runner]
+Exim's mechanism for retrying messages that fail to get delivered at the first
+attempt is the queue runner process. You must either run an Exim daemon that
+uses the %-q% option with a time interval to start queue runners at regular
+intervals, or use some other means (such as 'cron') to start them. If you do
+not arrange for queue runners to be run, messages that fail temporarily at the
+first attempt will remain on your queue for ever. A queue runner process works
+it way through the queue, one message at a time, trying each delivery that has
+passed its retry time.
+You can run several queue runners at once.
+
+Exim uses a set of configured rules to determine when next to retry the failing
+address (see chapter <<CHAPretry>>). These rules also specify when Exim should
+give up trying to deliver to the address, at which point it generates a bounce
+message. If no retry rules are set for a particular host, address, and error
+combination, no retries are attempted, and temporary errors are treated as
+permanent.
+
+
+
+Temporary delivery failure
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[delivery,temporary failure]
+There are many reasons why a message may not be immediately deliverable to a
+particular address. Failure to connect to a remote machine (because it, or the
+connection to it, is down) is one of the most common. Temporary failures may be
+detected during routing as well as during the transport stage of delivery.
+Local deliveries may be delayed if NFS files are unavailable, or if a mailbox
+is on a file system where the user is over quota. Exim can be configured to
+impose its own quotas on local mailboxes; where system quotas are set they will
+also apply.
+
+If a host is unreachable for a period of time, a number of messages may be
+waiting for it by the time it recovers, and sending them in a single SMTP
+connection is clearly beneficial. Whenever a delivery to a remote host is
+deferred,
+
+cindex:[hints database]
+Exim makes a note in its hints database, and whenever a successful
+SMTP delivery has happened, it looks to see if any other messages are waiting
+for the same host. If any are found, they are sent over the same SMTP
+connection, subject to a configuration limit as to the maximum number in any
+one connection.
+
+
+
+
+Permanent delivery failure
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[delivery,permanent failure]
+cindex:[bounce message,when generated]
+When a message cannot be delivered to some or all of its intended recipients, a
+bounce message is generated. Temporary delivery failures turn into permanent
+errors when their timeout expires. All the addresses that fail in a given
+delivery attempt are listed in a single message. If the original message has
+many recipients, it is possible for some addresses to fail in one delivery
+attempt and others to fail subsequently, giving rise to more than one bounce
+message. The wording of bounce messages can be customized by the administrator.
+See chapter <<CHAPemsgcust>> for details.
+
+cindex:['X-Failed-Recipients:' header line]
+Bounce messages contain an 'X-Failed-Recipients:' header line that lists the
+failed addresses, for the benefit of programs that try to analyse such messages
+automatically.
+
+cindex:[bounce message,recipient of]
+A bounce message is normally sent to the sender of the original message, as
+obtained from the message's envelope. For incoming SMTP messages, this is the
+address given in the MAIL command. However, when an address is
+expanded via a forward or alias file, an alternative address can be specified
+for delivery failures of the generated addresses. For a mailing list expansion
+(see section <<SECTmailinglists>>) it is common to direct bounce messages to the
+manager of the list.
+
+
+
+
+Failures to deliver bounce messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[bounce message,failure to deliver]
+If a bounce message (either locally generated or received from a remote host)
+itself suffers a permanent delivery failure, the message is left on the queue,
+but it is frozen, awaiting the attention of an administrator. There are options
+which can be used to make Exim discard such failed messages, or to keep them
+for only a short time (see %timeout_frozen_after% and
+%ignore_bounce_errors_after%).
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+Building and installing Exim
+----------------------------
+
+cindex:[building Exim]
+
+Unpacking
+~~~~~~~~~
+Exim is distributed as a gzipped or bzipped tar file which, when upacked,
+creates a directory with the name of the current release (for example,
+_exim-{version}_) into which the following files are placed:
+
+[frame="none"]
+`--------------------`--------------------------------------------------------
+_ACKNOWLEDGMENTS_ contains some acknowledgments
+_CHANGES_ contains a reference to where changes are documented
+_LICENCE_ the GNU General Public Licence
+_Makefile_ top-level make file
+_NOTICE_ conditions for the use of Exim
+_README_ list of files, directories and simple build instructions
+------------------------------------------------------------------------------
+
+Other files whose names begin with _README_ may also be present. The
+following subdirectories are created:
+
+[frame="none"]
+`--------------------`------------------------------------------------
+_Local_ an empty directory for local configuration files
+_OS_ OS-specific files
+_doc_ documentation files
+_exim_monitor_ source files for the Exim monitor
+_scripts_ scripts used in the build process
+_src_ remaining source files
+_util_ independent utilities
+----------------------------------------------------------------------
+
+The main utility programs are contained in the _src_ directory, and are built
+with the Exim binary. The _util_ directory contains a few optional scripts
+that may be useful to some sites.
+
+
+Multiple machine architectures and operating systems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[building Exim,multiple OS/architectures]
+The building process for Exim is arranged to make it easy to build binaries for
+a number of different architectures and operating systems from the same set of
+source files. Compilation does not take place in the _src_ directory. Instead,
+a 'build directory' is created for each architecture and operating system.
+
+cindex:[symbolic link,to build directory]
+Symbolic links to the sources are installed in this directory, which is where
+the actual building takes place.
+
+In most cases, Exim can discover the machine architecture and operating system
+for itself, but the defaults can be overridden if necessary.
+
+
+[[SECTdb]]
+DBM libraries
+~~~~~~~~~~~~~
+cindex:[DBM libraries, discussion of]
+cindex:[hints database,DBM files used for]
+Even if you do not use any DBM files in your configuration, Exim still needs a
+DBM library in order to operate, because it uses indexed files for its hints
+databases. Unfortunately, there are a number of DBM libraries in existence, and
+different operating systems often have different ones installed.
+
+cindex:[Solaris,DBM library for]
+cindex:[IRIX, DBM library for]
+cindex:[BSD, DBM library for]
+cindex:[Linux, DBM library for]
+If you are using Solaris, IRIX, one of the modern BSD systems, or a modern
+Linux distribution, the DBM configuration should happen automatically, and you
+may be able to ignore this section. Otherwise, you may have to learn more than
+you would like about DBM libraries from what follows.
+
+cindex:['ndbm' DBM library]
+Licensed versions of Unix normally contain a library of DBM functions operating
+via the 'ndbm' interface, and this is what Exim expects by default. Free
+versions of Unix seem to vary in what they contain as standard. In particular,
+some early versions of Linux have no default DBM library, and different
+distributors have chosen to bundle different libraries with their packaged
+versions. However, the more recent releases seem to have standardised on the
+Berkeley DB library.
+
+Different DBM libraries have different conventions for naming the files they
+use. When a program opens a file called _dbmfile_, there are four
+possibilities:
+
+. A traditional 'ndbm' implementation, such as that supplied as part of
+Solaris, operates on two files called _dbmfile.dir_ and _dbmfile.pag_.
+
+. cindex:['gdbm' DBM library]
+The GNU library, 'gdbm', operates on a single file. If used via its 'ndbm'
+compatibility interface it makes two different hard links to it with names
+_dbmfile.dir_ and _dbmfile.pag_, but if used via its native interface, the
+file name is used unmodified.
+
+. cindex:[Berkeley DB library]
+The Berkeley DB package, if called via its 'ndbm' compatibility interface,
+operates on a single file called _dbmfile.db_, but otherwise looks to the
+programmer exactly the same as the traditional 'ndbm' implementation.
+
+. If the Berkeley package is used in its native mode, it operates on a single
+file called _dbmfile_; the programmer's interface is somewhat different to
+the traditional 'ndbm' interface.
+
+. To complicate things further, there are several very different versions of the
+Berkeley DB package. Version 1.85 was stable for a very long time, releases
+2.'x' and 3.'x' were current for a while, but the latest versions are now
+numbered 4.'x'. Maintenance of some of the earlier releases has ceased. All
+versions of Berkeley DB can be obtained from
++
+&&&
+*http://www.sleepycat.com/[]*
+&&&
+
+. cindex:['tdb' DBM library]
+Yet another DBM library, called 'tdb', has become available from
++
+&&&
+*http://download.sourceforge.net/tdb[]*
+&&&
++
+It has its own interface, and also operates on a single file.
+
+cindex:[USE_DB]
+cindex:[DBM libraries, configuration for building]
+Exim and its utilities can be compiled to use any of these interfaces. In order
+to use any version of the Berkeley DB package in native mode, you must set
+USE_DB in an appropriate configuration file (typically
+_Local/Makefile_). For example:
+
+ USE_DB=yes
+
+Similarly, for gdbm you set USE_GDBM, and for tdb you set USE_TDB. An
+error is diagnosed if you set more than one of these.
+
+At the lowest level, the build-time configuration sets none of these options,
+thereby assuming an interface of type (1). However, some operating system
+configuration files (for example, those for the BSD operating systems and
+Linux) assume type (4) by setting USE_DB as their default, and the
+configuration files for Cygwin set USE_GDBM. Anything you set in
+_Local/Makefile_, however, overrides these system defaults.
+
+As well as setting USE_DB, USE_GDBM, or USE_TDB, it may also be
+necessary to set DBMLIB, to cause inclusion of the appropriate library, as
+in one of these lines:
+
+ DBMLIB = -ldb
+ DBMLIB = -ltdb
+
+Settings like that will work if the DBM library is installed in the standard
+place. Sometimes it is not, and the library's header file may also not be in
+the default path. You may need to set INCLUDE to specify where the header
+file is, and to specify the path to the library more fully in DBMLIB, as in
+this example:
+
+ INCLUDE=-I/usr/local/include/db-4.1
+ DBMLIB=/usr/local/lib/db-4.1/libdb.a
+
+
+There is further detailed discussion about the various DBM libraries in the
+file _doc/dbm.discuss.txt_ in the Exim distribution.
+
+
+
+Pre-building configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[building Exim,pre-building configuration]
+cindex:[configuration for building Exim]
+cindex:[_Local/Makefile_]
+cindex:[_src/EDITME_]
+Before building Exim, a local configuration file that specifies options
+independent of any operating system has to be created with the name
+_Local/Makefile_. A template for this file is supplied as the file
+_src/EDITME_, and it contains full descriptions of all the option settings
+therein. These descriptions are therefore not repeated here. If you are
+building Exim for the first time, the simplest thing to do is to copy
+_src/EDITME_ to _Local/Makefile_, then read it and edit it appropriately.
+
+There are three settings that you must supply, because Exim will not build
+without them. They are the location of the run time configuration file
+(CONFIGURE_FILE), the directory in which Exim binaries will be installed
+(BIN_DIRECTORY), and the identity of the Exim user (EXIM_USER and
+maybe EXIM_GROUP as well). The value of CONFIGURE_FILE can in fact be
+a colon-separated list of file names; Exim uses the first of them that exists.
+
+There are a few other parameters that can be specified either at build time or
+at run time, to enable the same binary to be used on a number of different
+machines. However, if the locations of Exim's spool directory and log file
+directory (if not within the spool directory) are fixed, it is recommended that
+you specify them in _Local/Makefile_ instead of at run time, so that errors
+detected early in Exim's execution (such as a malformed configuration file) can
+be logged.
+
+cindex:[content scanning,specifying at build time]
+Exim's interfaces for calling virus and spam scanning sofware directly from
+access control lists are not compiled by default. If you want to include these
+facilities, you need to set
+
+ WITH_CONTENT_SCAN=yes
+
+in your _Local/Makefile_. For details of the facilities themselves, see
+chapter <<CHAPexiscan>>.
+
+
+cindex:[_Local/eximon.conf_]
+cindex:[_exim_monitor/EDITME_]
+If you are going to build the Exim monitor, a similar configuration process is
+required. The file _exim_monitor/EDITME_ must be edited appropriately for
+your installation and saved under the name _Local/eximon.conf_. If you are
+happy with the default settings described in _exim_monitor/EDITME_,
+_Local/eximon.conf_ can be empty, but it must exist.
+
+This is all the configuration that is needed in straightforward cases for known
+operating systems. However, the building process is set up so that it is easy
+to override options that are set by default or by operating-system-specific
+configuration files, for example to change the name of the C compiler, which
+defaults to %gcc%. See section <<SECToverride>> below for details of how to do
+this.
+
+
+
+Support for iconv()
+~~~~~~~~~~~~~~~~~~~
+cindex:['iconv()' support]
+The contents of header lines in messages may be encoded according to the rules
+described RFC 2047. This makes it possible to transmit characters that are not
+in the ASCII character set, and to label them as being in a particular
+character set. When Exim is inspecting header lines by means of the %\$h_%
+mechanism, it decodes them, and translates them into a specified character set
+(default ISO-8859-1). The translation is possible only if the operating system
+supports the 'iconv()' function.
+
+However, some of the operating systems that supply 'iconv()' do not support
+very many conversions. The GNU %libiconv% library (available from
+*http://www.gnu.org/software/libiconv/[]*) can be installed on such systems to
+remedy this deficiency, as well as on systems that do not supply 'iconv()' at
+all. After installing %libiconv%, you should add
+
+ HAVE_ICONV=yes
+
+to your _Local/Makefile_ and rebuild Exim.
+
+
+
+[[SECTinctlsssl]]
+Including TLS/SSL encryption support
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[TLS,including support for TLS]
+cindex:[encryption,including support for]
+cindex:[SUPPORT_TLS]
+cindex:[OpenSSL,building Exim with]
+cindex:[GnuTLS,building Exim with]
+Exim can be built to support encrypted SMTP connections, using the STARTTLS
+command as per RFC 2487. It can also support legacy clients that expect to
+start a TLS session immediately on connection to a non-standard port (see the
+%tls_on_connect_ports% runtime option and the %-tls-on-connect% command
+line option).
+
+If you want to build Exim with TLS support, you must first install either the
+OpenSSL or GnuTLS library. There is no cryptographic code in Exim itself for
+implementing SSL.
+
+If OpenSSL is installed, you should set
+
+ SUPPORT_TLS=yes
+ TLS_LIBS=-lssl -lcrypto
+
+in _Local/Makefile_. You may also need to specify the locations of the
+OpenSSL library and include files. For example:
+
+ SUPPORT_TLS=yes
+ TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+ TLS_INCLUDE=-I/usr/local/openssl/include/
+
+cindex:[USE_GNUTLS]
+If GnuTLS is installed, you should set
+
+ SUPPORT_TLS=yes
+ USE_GNUTLS=yes
+ TLS_LIBS=-lgnutls -ltasn1 -lgcrypt
+
+in _Local/Makefile_, and again you may need to specify the locations of the
+library and include files. For example:
+
+ SUPPORT_TLS=yes
+ USE_GNUTLS=yes
+ TLS_LIBS=-L/usr/gnu/lib -lgnutls -ltasn1 -lgcrypt
+ TLS_INCLUDE=-I/usr/gnu/include
+
+You do not need to set TLS_INCLUDE if the relevant directory is already
+specified in INCLUDE. Details of how to configure Exim to make use of TLS
+are given in chapter <<CHAPTLS>>.
+
+
+
+
+Use of tcpwrappers
+~~~~~~~~~~~~~~~~~~
+cindex:[tcpwrappers, building Exim to support]
+cindex:[USE_TCP_WRAPPERS]
+Exim can be linked with the 'tcpwrappers' library in order to check incoming
+SMTP calls using the 'tcpwrappers' control files. This may be a convenient
+alternative to Exim's own checking facilities for installations that are
+already making use of 'tcpwrappers' for other purposes. To do this, you should
+set USE_TCP_WRAPPERS in _Local/Makefile_, arrange for the file
+_tcpd.h_ to be available at compile time, and also ensure that the library
+_libwrap.a_ is available at link time, typically by including %-lwrap% in
+EXTRALIBS_EXIM. For example, if 'tcpwrappers' is installed in
+_/usr/local_, you might have
+
+ USE_TCP_WRAPPERS=yes
+ CFLAGS=-O -I/usr/local/include
+ EXTRALIBS_EXIM=-L/usr/local/lib -lwrap
+
+in _Local/Makefile_. The name to use in the 'tcpwrappers' control files is
+``exim''. For example, the line
+
+ exim : LOCAL 192.168.1. .friendly.domain.example
+
+in your _/etc/hosts.allow_ file allows connections from the local host, from
+the subnet 192.168.1.0/24, and from all hosts in 'friendly.domain.example'.
+All other connections are denied. Consult the 'tcpwrappers' documentation for
+further details.
+
+
+
+Including support for IPv6
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[IPv6,including support for]
+Exim contains code for use on systems that have IPv6 support. Setting
+`HAVE_IPV6=YES` in _Local/Makefile_ causes the IPv6 code to be included;
+it may also be necessary to set IPV6_INCLUDE and IPV6_LIBS on systems
+where the IPv6 support is not fully integrated into the normal include and
+library files.
+
+Two different types of DNS record for handling IPv6 addresses have been
+defined. AAAA records (analagous to A records for IPv4) are in use, and are
+currently seen as the mainstream. Another record type called A6 was proposed
+as better than AAAA because it had more flexibility. However, it was felt to be
+over-complex, and its status was reduced to ``experimental''. It is not known
+if anyone is actually using A6 records. Exim has support for A6 records, but
+this is included only if you set `SUPPORT_A6=YES` in _Local/Makefile_. The
+support has not been tested for some time.
+
+
+
+The building process
+~~~~~~~~~~~~~~~~~~~~
+cindex:[build directory]
+Once _Local/Makefile_ (and _Local/eximon.conf_, if required) have been
+created, run 'make' at the top level. It determines the architecture and
+operating system types, and creates a build directory if one does not exist.
+For example, on a Sun system running Solaris 8, the directory
+_build-SunOS5-5.8-sparc_ is created.
+cindex:[symbolic link,to source files]
+Symbolic links to relevant source files are installed in the build directory.
+
+*Warning*: The %-j% (parallel) flag must not be used with 'make'; the
+building process fails if it is set.
+
+If this is the first time 'make' has been run, it calls a script that builds
+a make file inside the build directory, using the configuration files from the
+_Local_ directory. The new make file is then passed to another instance of
+'make'. This does the real work, building a number of utility scripts, and
+then compiling and linking the binaries for the Exim monitor (if configured), a
+number of utility programs, and finally Exim itself. The command 'make
+makefile' can be used to force a rebuild of the make file in the build
+directory, should this ever be necessary.
+
+If you have problems building Exim, check for any comments there may be in the
+_README_ file concerning your operating system, and also take a look at the
+FAQ, where some common problems are covered.
+
+
+
+
+[[SECToverride]]
+Overriding build-time options for Exim
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[build-time options, overriding]
+The main make file that is created at the beginning of the building process
+consists of the concatenation of a number of files which set configuration
+values, followed by a fixed set of 'make' instructions. If a value is set
+more than once, the last setting overrides any previous ones. This provides a
+convenient way of overriding defaults. The files that are concatenated are, in
+order:
+
+&&&
+_OS/Makefile-Default_
+_OS/Makefile-_<'ostype'>
+_Local/Makefile_
+_Local/Makefile-_<'ostype'>
+_Local/Makefile-_<'archtype'>
+_Local/Makefile-_<'ostype'>-<'archtype'>
+_OS/Makefile-Base_
+&&&
+
+cindex:[_Local/Makefile_]
+cindex:[building Exim,operating system type]
+cindex:[building Exim,architecture type]
+where <'ostype'> is the operating system type and <'archtype'> is the
+architecture type. _Local/Makefile_ is required to exist, and the building
+process fails if it is absent. The other three _Local_ files are optional,
+and are often not needed.
+
+The values used for <'ostype'> and <'archtype'> are obtained from scripts
+called _scripts/os-type_ and _scripts/arch-type_ respectively. If either of
+the environment variables EXIM_OSTYPE or EXIM_ARCHTYPE is set, their
+values are used, thereby providing a means of forcing particular settings.
+Otherwise, the scripts try to get values from the %uname% command. If this
+fails, the shell variables OSTYPE and ARCHTYPE are inspected. A number
+of 'ad hoc' transformations are then applied, to produce the standard names
+that Exim expects. You can run these scripts directly from the shell in order
+to find out what values are being used on your system.
+
+
+_OS/Makefile-Default_ contains comments about the variables that are set
+therein. Some (but not all) are mentioned below. If there is something that
+needs changing, review the contents of this file and the contents of the make
+file for your operating system (_OS/Makefile-<ostype>_) to see what the
+default values are.
+
+
+cindex:[building Exim,overriding default settings]
+If you need to change any of the values that are set in _OS/Makefile-Default_
+or in _OS/Makefile-<ostype>_, or to add any new definitions, you do not
+need to change the original files. Instead, you should make the changes by
+putting the new values in an appropriate _Local_ file. For example,
+cindex:[Tru64-Unix build-time settings]
+when building Exim in many releases of the Tru64-Unix (formerly Digital UNIX,
+formerly DEC-OSF1) operating system, it is necessary to specify that the C
+compiler is called 'cc' rather than 'gcc'. Also, the compiler must be
+called with the option %-std1%, to make it recognize some of the features of
+Standard C that Exim uses. (Most other compilers recognize Standard C by
+default.) To do this, you should create a file called _Local/Makefile-OSF1_
+containing the lines
+
+ CC=cc
+ CFLAGS=-std1
+
+If you are compiling for just one operating system, it may be easier to put
+these lines directly into _Local/Makefile_.
+
+Keeping all your local configuration settings separate from the distributed
+files makes it easy to transfer them to new versions of Exim simply by copying
+the contents of the _Local_ directory.
+
+
+cindex:[NIS lookup type,including support for]
+cindex:[NIS+ lookup type,including support for]
+cindex:[LDAP,including support for]
+cindex:[lookup,inclusion in binary]
+Exim contains support for doing LDAP, NIS, NIS+, and other kinds of file
+lookup, but not all systems have these components installed, so the default is
+not to include the relevant code in the binary. All the different kinds of file
+and database lookup that Exim supports are implemented as separate code modules
+which are included only if the relevant compile-time options are set. In the
+case of LDAP, NIS, and NIS+, the settings for _Local/Makefile_ are:
+
+ LOOKUP_LDAP=yes
+ LOOKUP_NIS=yes
+ LOOKUP_NISPLUS=yes
+
+and similar settings apply to the other lookup types. They are all listed in
+_src/EDITME_. In most cases the relevant include files and interface
+libraries need to be installed before compiling Exim.
+cindex:[cdb,including support for]
+However, in the case of cdb, which is included in the binary only if
+
+ LOOKUP_CDB=yes
+
+is set, the code is entirely contained within Exim, and no external include
+files or libraries are required. When a lookup type is not included in the
+binary, attempts to configure Exim to use it cause run time configuration
+errors.
+
+cindex:[Perl,including support for]
+Exim can be linked with an embedded Perl interpreter, allowing Perl
+subroutines to be called during string expansion. To enable this facility,
+
+ EXIM_PERL=perl.o
+
+must be defined in _Local/Makefile_. Details of this facility are given in
+chapter <<CHAPperl>>.
+
+cindex:[X11 libraries, location of]
+The location of the X11 libraries is something that varies a lot between
+operating systems, and of course there are different versions of X11 to cope
+with. Exim itself makes no use of X11, but if you are compiling the Exim
+monitor, the X11 libraries must be available.
+The following three variables are set in _OS/Makefile-Default_:
+
+ X11=/usr/X11R6
+ XINCLUDE=-I$(X11)/include
+ XLFLAGS=-L$(X11)/lib
+
+These are overridden in some of the operating-system configuration files. For
+example, in _OS/Makefile-SunOS5_ there is
+
+ X11=/usr/openwin
+ XINCLUDE=-I$(X11)/include
+ XLFLAGS=-L$(X11)/lib -R$(X11)/lib
+
+If you need to override the default setting for your operating system, place a
+definition of all three of these variables into your
+_Local/Makefile-<ostype>_ file.
+
+cindex:[EXTRALIBS]
+If you need to add any extra libraries to the link steps, these can be put in a
+variable called EXTRALIBS, which appears in all the link commands, but by
+default is not defined. In contrast, EXTRALIBS_EXIM is used only on the
+command for linking the main Exim binary, and not for any associated utilities.
+
+cindex:[DBM libraries, configuration for building]
+There is also DBMLIB, which appears in the link commands for binaries that
+use DBM functions (see also section <<SECTdb>>). Finally, there is
+EXTRALIBS_EXIMON, which appears only in the link step for the Exim monitor
+binary, and which can be used, for example, to include additional X11
+libraries.
+
+cindex:[configuration file,editing]
+The make file copes with rebuilding Exim correctly if any of the configuration
+files are edited. However, if an optional configuration file is deleted, it is
+necessary to touch the associated non-optional file (that is, _Local/Makefile_
+or _Local/eximon.conf_) before rebuilding.
+
+
+OS-specific header files
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[_os.h_]
+cindex:[building Exim,OS-specific C header files]
+The _OS_ directory contains a number of files with names of the form
+_os.h-<ostype>_. These are system-specific C header files that should not
+normally need to be changed. There is a list of macro settings that are
+recognized in the file _OS/os.configuring_, which should be consulted if you
+are porting Exim to a new operating system.
+
+
+
+Overriding build-time options for the monitor
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[building Eximon,overriding default options]
+A similar process is used for overriding things when building the Exim monitor,
+where the files that are involved are
+
+&&&
+_OS/eximon.conf-Default_
+_OS/eximon.conf-_<'ostype'>
+_Local/eximon.conf_
+_Local/eximon.conf-_<'ostype'>
+_Local/eximon.conf-_<'archtype'>
+_Local/eximon.conf-_<'ostype'>-<'archtype'>
+&&&
+
+cindex:[_Local/eximon.conf_]
+As with Exim itself, the final three files need not exist, and in this case the
+_OS/eximon.conf-<ostype>_ file is also optional. The default values in
+_OS/eximon.conf-Default_ can be overridden dynamically by setting environment
+variables of the same name, preceded by EXIMON_. For example, setting
+EXIMON_LOG_DEPTH in the environment overrides the value of
+LOG_DEPTH at run time.
+
+
+
+
+Installing Exim binaries and scripts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[installing Exim]
+cindex:[BIN_DIRECTORY]
+The command 'make install' runs the 'exim_install' script with no
+arguments. The script copies binaries and utility scripts into the directory
+whose name is specified by the BIN_DIRECTORY setting in
+_Local/Makefile_.
+
+cindex:[CONFIGURE_FILE]
+Exim's run time configuration file is named by the CONFIGURE_FILE setting
+in _Local/Makefile_. If this names a single file, and the file does not
+exist, the default configuration file _src/configure.default_ is copied there
+by the installation script. If a run time configuration file already exists, it
+is left alone. If CONFIGURE_FILE is a colon-separated list, naming several
+alternative files, no default is installed.
+
+cindex:[system aliases file]
+cindex:[_/etc/aliases_]
+One change is made to the default configuration file when it is installed: the
+default configuration contains a router that references a system aliases file.
+The path to this file is set to the value specified by
+SYSTEM_ALIASES_FILE in _Local/Makefile_ (_/etc/aliases_ by default).
+If the system aliases file does not exist, the installation script creates it,
+and outputs a comment to the user.
+
+The created file contains no aliases, but it does contain comments about the
+aliases a site should normally have. Mail aliases have traditionally been
+kept in _/etc/aliases_. However, some operating systems are now using
+_/etc/mail/aliases_. You should check if yours is one of these, and change
+Exim's configuration if necessary.
+
+The default configuration uses the local host's name as the only local domain,
+and is set up to do local deliveries into the shared directory _/var/mail_,
+running as the local user. System aliases and _.forward_ files in users' home
+directories are supported, but no NIS or NIS+ support is configured. Domains
+other than the name of the local host are routed using the DNS, with delivery
+over SMTP.
+
+cindex:[setuid,installing Exim with]
+The install script copies files only if they are newer than the files they are
+going to replace. The Exim binary is required to be owned by root and have the
+'setuid' bit set, for normal configurations. Therefore, you must run 'make
+install' as root so that it can set up the Exim binary in this way. However, in
+some special situations (for example, if a host is doing no local deliveries)
+it may be possible to run Exim without making the binary setuid root (see
+chapter <<CHAPsecurity>> for details).
+
+It is possible to install Exim for special purposes (such as building a binary
+distribution) in a private part of the file system. You can do this by a
+command such as
+
+ make DESTDIR=/some/directory/ install
+
+This has the effect of pre-pending the specified directory to all the file
+paths, except the name of the system aliases file that appears in the default
+configuration. (If a default alias file is created, its name 'is' modified.)
+For backwards compatibility, ROOT is used if DESTDIR is not set,
+but this usage is deprecated.
+
+cindex:[installing Exim,what is not installed]
+Running 'make install' does not copy the Exim 4 conversion script
+'convert4r4', or the 'pcretest' test program. You will probably run the
+first of these only once (if you are upgrading from Exim 3), and the second
+isn't really part of Exim. None of the documentation files in the _doc_
+directory are copied, except for the info files when you have set
+INFO_DIRECTORY, as described in section <<SECTinsinfdoc>> below.
+
+For the utility programs, old versions are renamed by adding the suffix _.O_
+to their names. The Exim binary itself, however, is handled differently. It is
+installed under a name that includes the version number and the compile number,
+for example _exim-{version}-1_. The script then arranges for a symbolic link
+called _exim_ to point to the binary. If you are updating a previous version
+of Exim, the script takes care to ensure that the name _exim_ is never absent
+from the directory (as seen by other processes).
+
+cindex:[installing Exim,testing the script]
+If you want to see what the 'make install' will do before running it for
+real, you can pass the %-n% option to the installation script by this command:
+
+ make INSTALL_ARG=-n install
+
+The contents of the variable INSTALL_ARG are passed to the installation
+script. You do not need to be root to run this test. Alternatively, you can run
+the installation script directly, but this must be from within the build
+directory. For example, from the top-level Exim directory you could use this
+command:
+
+ (cd build-SunOS5-5.5.1-sparc; ../scripts/exim_install -n)
+
+cindex:[installing Exim,install script options]
+There are two other options that can be supplied to the installation script.
+
+- %-no_chown% bypasses the call to change the owner of the installed binary
+to root, and the call to make it a setuid binary.
+
+- %-no_symlink% bypasses the setting up of the symbolic link _exim_ to the
+installed binary.
+
+INSTALL_ARG can be used to pass these options to the script. For example:
+
+ make INSTALL_ARG=-no_symlink install
+
+
+The installation script can also be given arguments specifying which files are
+to be copied. For example, to install just the Exim binary, and nothing else,
+without creating the symbolic link, you could use:
+
+ make INSTALL_ARG='-no_symlink exim' install
+
+
+
+
+[[SECTinsinfdoc]]
+Installing info documentation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[installing Exim,'info' documentation]
+Not all systems use the GNU 'info' system for documentation, and for this
+reason, the Texinfo source of Exim's documentation is not included in the main
+distribution. Instead it is available separately from the ftp site (see section
+<<SECTavail>>).
+
+If you have defined INFO_DIRECTORY in _Local/Makefile_ and the Texinfo
+source of the documentation is found in the source tree, running 'make
+install' automatically builds the info files and installs them.
+
+
+
+Setting up the spool directory
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[spool directory,creating]
+When it starts up, Exim tries to create its spool directory if it does not
+exist. The Exim uid and gid are used for the owner and group of the spool
+directory. Sub-directories are automatically created in the spool directory as
+necessary.
+
+
+
+
+Testing
+~~~~~~~
+cindex:[testing,installation]
+Having installed Exim, you can check that the run time configuration file is
+syntactically valid by running the following command, which assumes that the
+Exim binary directory is within your PATH environment variable:
+
+ exim -bV
+
+If there are any errors in the configuration file, Exim outputs error messages.
+Otherwise it outputs the version number and build date,
+the DBM library that is being used, and information about which drivers and
+other optional code modules are included in the binary.
+Some simple routing tests can be done by using the address testing option. For
+example,
+
+ exim -bt <local username>
+
+should verify that it recognizes a local mailbox, and
+
+ exim -bt <remote address>
+
+a remote one. Then try getting it to deliver mail, both locally and remotely.
+This can be done by passing messages directly to Exim, without going through a
+user agent. For example:
+
+ exim -v postmaster@your.domain.example
+ From: user@your.domain.example
+ To: postmaster@your.domain.example
+ Subject: Testing Exim
+
+ This is a test message.
+ ^D
+
+The %-v% option causes Exim to output some verification of what it is doing.
+In this case you should see copies of three log lines, one for the message's
+arrival, one for its delivery, and one containing ``Completed''.
+
+cindex:[delivery,problems with]
+If you encounter problems, look at Exim's log files ('mainlog' and
+'paniclog') to see if there is any relevant information there. Another source
+of information is running Exim with debugging turned on, by specifying the
+%-d% option. If a message is stuck on Exim's spool, you can force a delivery
+with debugging turned on by a command of the form
+
+ exim -d -M <message-id>
+
+You must be root or an ``admin user'' in order to do this. The %-d% option
+produces rather a lot of output, but you can cut this down to specific areas.
+For example, if you use %-d-all+route% only the debugging information relevant
+to routing is included. (See the %-d% option in chapter <<CHAPcommandline>> for
+more details.)
+
+cindex:[``sticky'' bit]
+cindex:[lock files]
+One specific problem that has shown up on some sites is the inability to do
+local deliveries into a shared mailbox directory, because it does not have the
+``sticky bit'' set on it. By default, Exim tries to create a lock file before
+writing to a mailbox file, and if it cannot create the lock file, the delivery
+is deferred. You can get round this either by setting the ``sticky bit'' on the
+directory, or by setting a specific group for local deliveries and allowing
+that group to create files in the directory (see the comments above the
+^local_delivery^ transport in the default configuration file). Another
+approach is to configure Exim not to use lock files, but just to rely on
+'fcntl()' locking instead. However, you should do this only if all user
+agents also use 'fcntl()' locking. For further discussion of locking issues,
+see chapter <<CHAPappendfile>>.
+
+One thing that cannot be tested on a system that is already running an MTA is
+the receipt of incoming SMTP mail on the standard SMTP port. However, the
+%-oX% option can be used to run an Exim daemon that listens on some other
+port, or 'inetd' can be used to do this. The %-bh% option and the
+'exim_checkaccess' utility can be used to check out policy controls on
+incoming SMTP mail.
+
+Testing a new version on a system that is already running Exim can most easily
+be done by building a binary with a different CONFIGURE_FILE setting. From
+within the run time configuration, all other file and directory names
+that Exim uses can be altered, in order to keep it entirely clear of the
+production version.
+
+
+Replacing another MTA with Exim
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[replacing another MTA]
+Building and installing Exim for the first time does not of itself put it in
+general use. The name by which the system's MTA is called by mail user agents
+is either _/usr/sbin/sendmail_, or _/usr/lib/sendmail_ (depending on the
+operating system), and it is necessary to make this name point to the 'exim'
+binary in order to get the user agents to pass messages to Exim. This is
+normally done by renaming any existing file and making _/usr/sbin/sendmail_
+or _/usr/lib/sendmail_
+
+cindex:[symbolic link,to 'exim' binary]
+a symbolic link to the 'exim' binary. It is a good idea to remove any setuid
+privilege and executable status from the old MTA. It is then necessary to stop
+and restart the mailer daemon, if one is running.
+
+cindex:[FreeBSD, MTA indirection]
+cindex:[_/etc/mail/mailer.conf_]
+Some operating systems have introduced alternative ways of switching MTAs. For
+example, if you are running FreeBSD, you need to edit the file
+_/etc/mail/mailer.conf_ instead of setting up a symbolic link as just
+described. A typical example of the contents of this file for running Exim is
+as follows:
+
+ sendmail /usr/exim/bin/exim
+ send-mail /usr/exim/bin/exim
+ mailq /usr/exim/bin/exim -bp
+ newaliases /usr/bin/true
+
+
+Once you have set up the symbolic link, or edited _/etc/mail/mailer.conf_,
+your Exim installation is ``live''. Check it by sending a message from your
+favourite user agent.
+
+You should consider what to tell your users about the change of MTA. Exim may
+have different capabilities to what was previously running, and there are
+various operational differences such as the text of messages produced by
+command line options and in bounce messages. If you allow your users to make
+use of Exim's filtering capabilities, you should make the document entitled
+'Exim's interface to mail filtering'
+available to them.
+
+
+
+Upgrading Exim
+~~~~~~~~~~~~~~
+cindex:[upgrading Exim]
+If you are already running Exim on your host, building and installing a new
+version automatically makes it available to MUAs, or any other programs that
+call the MTA directly. However, if you are running an Exim daemon, you do need
+to send it a HUP signal, to make it re-exec itself, and thereby pick up the new
+binary. You do not need to stop processing mail in order to install a new
+version of Exim.
+
+
+
+Stopping the Exim daemon on Solaris
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[Solaris,stopping Exim on]
+The standard command for stopping the mailer daemon on Solaris is
+
+ /etc/init.d/sendmail stop
+
+If _/usr/lib/sendmail_ has been turned into a symbolic link, this script
+fails to stop Exim because it uses the command 'ps -e' and greps the output
+for the text ``sendmail''; this is not present because the actual program name
+(that is, ``exim'') is given by the 'ps' command with these options. A solution
+is to replace the line that finds the process id with something like
+
+ pid=`cat /var/spool/exim/exim-daemon.pid`
+
+to obtain the daemon's pid directly from the file that Exim saves it in.
+
+Note, however, that stopping the daemon does not ``stop Exim''. Messages can
+still be received from local processes, and if automatic delivery is configured
+(the normal case), deliveries will still occur.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPcommandline]]
+The Exim command line
+---------------------
+cindex:[command line,options]
+cindex:[options,command line]
+Exim's command line takes the standard Unix form of a sequence of options,
+each starting with a hyphen character, followed by a number of arguments. The
+options are compatible with the main options of Sendmail, and there are also
+some additional options, some of which are compatible with Smail 3. Certain
+combinations of options do not make sense, and provoke an error if used.
+The form of the arguments depends on which options are set.
+
+
+Setting options by program name
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['mailq']
+If Exim is called under the name 'mailq', it behaves as if the option %-bp%
+were present before any other options.
+The %-bp% option requests a listing of the contents of the mail queue on the
+standard output.
+This feature is for compatibility with some systems that contain a command of
+that name in one of the standard libraries, symbolically linked to
+_/usr/sbin/sendmail_ or _/usr/lib/sendmail_.
+
+cindex:['rsmtp']
+If Exim is called under the name 'rsmtp' it behaves as if the option %-bS%
+were present before any other options, for compatibility with Smail. The %-bS%
+option is used for reading in a number of messages in batched SMTP format.
+
+cindex:['rmail']
+If Exim is called under the name 'rmail' it behaves as if the %-i% and
+%-oee% options were present before any other options, for compatibility with
+Smail. The name 'rmail' is used as an interface by some UUCP systems.
+
+cindex:['runq']
+cindex:[queue runner]
+If Exim is called under the name 'runq' it behaves as if the option %-q% were
+present before any other options, for compatibility with Smail. The %-q%
+option causes a single queue runner process to be started.
+
+cindex:['newaliases']
+cindex:[alias file,building]
+cindex:[Sendmail compatibility,calling Exim as 'newaliases']
+If Exim is called under the name 'newaliases' it behaves as if the option
+%-bi% were present before any other options, for compatibility with Sendmail.
+This option is used for rebuilding Sendmail's alias file. Exim does not have
+the concept of a single alias file, but can be configured to run a given
+command if called with the %-bi% option.
+
+
+[[SECTtrustedadmin]]
+Trusted and admin users
+~~~~~~~~~~~~~~~~~~~~~~~
+Some Exim options are available only to 'trusted users' and others are
+available only to 'admin users'. In the description below, the phrases ``Exim
+user'' and ``Exim group'' mean the user and group defined by EXIM_USER and
+EXIM_GROUP in _Local/Makefile_ or set by the %exim_user% and
+%exim_group% options. These do not necessarily have to use the name ``exim''.
+
+- cindex:[trusted user,definition of]
+cindex:[user, trusted definition of]
+The trusted users are root, the Exim user, any user listed in the
+%trusted_users% configuration option, and any user whose current group or any
+supplementary group is one of those listed in the %trusted_groups%
+configuration option. Note that the Exim group is not automatically trusted.
++
+cindex:[``From'' line]
+cindex:[envelope sender]
+Trusted users are always permitted to use the %-f% option or a leading ``From ''
+line to specify the envelope sender of a message that is passed to Exim through
+the local interface (see the %-bm% and %-f% options below). See the
+%untrusted_set_sender% option for a way of permitting non-trusted users to
+set envelope senders.
++
+cindex:['From:' header line]
+cindex:['Sender:' header line]
+For a trusted user, there is never any check on the contents of the 'From:'
+header line, and a 'Sender:' line is never added. Furthermore, any existing
+'Sender:' line in incoming local (non-TCP/IP) messages is not removed.
++
+Trusted users may also specify a host name, host address, interface address,
+protocol name, ident value, and authentication data when submitting a message
+locally. Thus, they are able to insert messages into Exim's queue locally that
+have the characteristics of messages received from a remote host. Untrusted
+users may in some circumstances use %-f%, but can never set the other values
+that are available to trusted users.
+
+- cindex:[user, admin definition of]
+cindex:[admin user,definition of]
+The admin users are root, the Exim user, and any user that is a member of the
+Exim group or of any group listed in the %admin_groups% configuration option.
+The current group does not have to be one of these groups.
++
+Admin users are permitted to list the queue, and to carry out certain
+operations on messages, for example, to force delivery failures. It is also
+necessary to be an admin user in order to see the full information provided by
+the Exim monitor, and full debugging output.
++
+By default, the use of the %-M%, %-q%, %-R%, and %-S% options to cause Exim
+to attempt delivery of messages on its queue is restricted to admin users.
+However, this restriction can be relaxed by setting the %prod_requires_admin%
+option false (that is, specifying %no_prod_requires_admin%).
++
+Similarly, the use of the %-bp% option to list all the messages in the queue
+is restricted to admin users unless %queue_list_requires_admin% is set
+false.
+
+
+*Warning*: If you configure your system so that admin users are able to
+edit Exim's configuration file, you are giving those users an easy way of
+getting root. There is further discussion of this issue at the start of chapter
+<<CHAPconf>>.
+
+
+
+
+Command line options
+~~~~~~~~~~~~~~~~~~~~
+The command options are described in alphabetical order below.
+
+///
+We insert a stylized DocBook comment here, to identify the start of the command
+line options. This is for the benefit of the Perl script that automatically
+creates a man page for the options.
+///
+
+++++
+<!-- === Start of command line options === -->
+++++
+
+
+*{hh}*::
+oindex:[{hh}]
+cindex:[options, command line; terminating]
+This is a pseudo-option whose only purpose is to terminate the options and
+therefore to cause subsequent command line items to be treated as arguments
+rather than options, even if they begin with hyphens.
+
+*--help*::
+oindex:[%{hh}help%]
+This option causes Exim to output a few sentences stating what it is.
+The same output is generated if the Exim binary is called with no options and
+no arguments.
+
+*-B*<'type'>::
+oindex:[%-B%]
+cindex:[8-bit characters]
+cindex:[Sendmail compatibility,8-bit characters]
+This is a Sendmail option for selecting 7 or 8 bit processing. Exim is 8-bit
+clean; it ignores this option.
+
+*-bd*::
+oindex:[%-bd%]
+cindex:[daemon]
+cindex:[SMTP listener]
+cindex:[queue runner]
+This option runs Exim as a daemon, awaiting incoming SMTP connections. Usually
+the %-bd% option is combined with the %-q%<'time'> option, to specify that
+the daemon should also initiate periodic queue runs.
++
+The %-bd% option can be used only by an admin user. If either of the %-d%
+(debugging) or %-v% (verifying) options are set, the daemon does not
+disconnect from the controlling terminal. When running this way, it can be
+stopped by pressing ctrl-C.
++
+By default, Exim listens for incoming connections to the standard SMTP port on
+all the host's running interfaces. However, it is possible to listen on other
+ports, on multiple ports, and only on specific interfaces. Chapter
+<<CHAPinterfaces>> contains a description of the options that control this.
++
+When a listening daemon
+cindex:[daemon,process id (pid)]
+cindex:[pid (process id),of daemon]
+is started without the use of %-oX% (that is, without overriding the normal
+configuration), it writes its process id to a file called _exim-daemon.pid_ in
+Exim's spool directory. This location can be overridden by setting
+PID_FILE_PATH in _Local/Makefile_. The file is written while Exim is still
+running as root.
++
+When %-oX% is used on the command line to start a listening daemon, the
+process id is not written to the normal pid file path. However, %-oP% can be
+used to specify a path on the command line if a pid file is required.
++
+The SIGHUP signal
+cindex:[SIGHUP]
+can be used to cause the daemon to re-exec itself. This should be done whenever
+Exim's configuration file, or any file that is incorporated into it by means of
+the %.include% facility, is changed, and also whenever a new version of Exim is
+installed. It is not necessary to do this when other files that are referenced
+from the configuration (for example, alias files) are changed, because these
+are reread each time they are used.
+
+*-bdf*::
+oindex:[%-bdf%]
+This option has the same effect as %-bd% except that it never disconnects from
+the controlling terminal, even when no debugging is specified.
+
+*-be*::
+oindex:[%-be%]
+cindex:[testing,string expansion]
+cindex:[expansion,testing]
+Run Exim in expansion testing mode. Exim discards its root privilege, to
+prevent ordinary users from using this mode to read otherwise inaccessible
+files. If no arguments are given, Exim runs interactively, prompting for lines
+of data.
++
+If Exim was built with USE_READLINE=yes in _Local/Makefile_, it tries
+to load the %libreadline% library dynamically whenever the %-be% option is
+used without command line arguments. If successful, it uses the 'readline()'
+function, which provides extensive line-editing facilities, for reading the
+test data. A line history is supported.
++
+Long expansion expressions can be split over several lines by using backslash
+continuations. As in Exim's run time configuration, whitespace at the start of
+continuation lines is ignored. Each argument or data line is passed through the
+string expansion mechanism, and the result is output. Variable values from the
+configuration file (for example, $qualify_domain$) are available, but no
+message-specific values (such as $domain$) are set, because no message is
+being processed.
+
+*-bF*~<'filename'>::
+oindex:[%-bF%]
+cindex:[system filter,testing]
+cindex:[testing,system filter]
+This option is the same as %-bf% except that it assumes that the filter being
+tested is a system filter. The additional commands that are available only in
+system filters are recognized.
+
+*-bf*~<'filename'>::
+oindex:[%-bf%]
+cindex:[filter,testing]
+cindex:[testing,filter file]
+cindex:[forward file,testing]
+cindex:[testing,forward file]
+cindex:[Sieve filter,testing]
+This option runs Exim in user filter testing mode; the file is the filter file
+to be tested, and a test message must be supplied on the standard input. If
+there are no message-dependent tests in the filter, an empty file can be
+supplied.
++
+If you want to test a system filter file, use %-bF% instead of %-bf%. You can
+use both %-bF% and %-bf% on the same command, in order to
+test a system filter and a user filter in the same run. For example:
+
+ exim -bF /system/filter -bf /user/filter </test/message
++
+This is helpful when the system filter adds header lines or sets filter
+variables that are used by the user filter.
++
+If the test filter file does not begin with one of the special lines
+
+ # Exim filter
+ # Sieve filter
++
+it is taken to be a normal _.forward_ file, and is tested for validity under
+that interpretation. See sections <<SECTitenonfilred>> to <<SECTspecitredli>> for a
+description of the possible contents of non-filter redirection lists.
++
+The result of an Exim command that uses %-bf%, provided no errors are
+detected, is a list of the actions that Exim would try to take if presented
+with the message for real. More details of filter testing are given in the
+separate document entitled 'Exim's interfaces to mail filtering'.
++
+When testing a filter file,
+cindex:[``From'' line]
+cindex:[envelope sender]
+cindex:[%-f% option,for filter testing]
+the envelope sender can be set by the %-f% option,
+or by a ``From '' line at the start of the test message. Various parameters that
+would normally be taken from the envelope recipient address of the message can
+be set by means of additional command line options (see the next four options).
+
+*-bfd*~<'domain'>::
+oindex:[%-bfd%]
+This sets the domain of the recipient address when a filter file is being
+tested by means of the %-bf% option. The default is the value of
+$qualify_domain$.
+
+*-bfl*~<'local~part'>::
+oindex:[%-bfl%]
+This sets the local part of the recipient address when a filter file is being
+tested by means of the %-bf% option. The default is the username of the
+process that calls Exim. A local part should be specified with any prefix or
+suffix stripped, because that is how it appears to the filter when a message is
+actually being delivered.
+
+*-bfp*~<'prefix'>::
+oindex:[%-bfp%]
+This sets the prefix of the local part of the recipient address when a filter
+file is being tested by means of the %-bf% option. The default is an empty
+prefix.
+
+*-bfs*~<'suffix'>::
+oindex:[%-bfs%]
+This sets the suffix of the local part of the recipient address when a filter
+file is being tested by means of the %-bf% option. The default is an empty
+suffix.
+
+*-bh*~<'IP~address'>::
+oindex:[%-bh%]
+cindex:[testing,incoming SMTP]
+cindex:[SMTP,testing incoming]
+cindex:[testing,relay control]
+cindex:[relaying,testing configuration]
+cindex:[policy control,testing]
+cindex:[debugging,%-bh% option]
+This option runs a fake SMTP session as if from the given IP address, using the
+standard input and output. The IP address may include a port number at the end,
+after a full stop. For example:
+
+ exim -bh 10.9.8.7.1234
+ exim -bh fe80::a00:20ff:fe86:a061.5678
++
+When an IPv6 address is given, it is converted into canonical form. In the case
+of the second example above, the value of $sender_host_address$ after
+conversion to the canonical form is `fe80:0000:0000:0a00:20ff:fe86:a061.5678`.
++
+Comments as to what is going on are written to the standard error file. These
+include lines beginning with ``LOG'' for anything that would have been logged.
+This facility is provided for testing configuration options for incoming
+messages, to make sure they implement the required policy. For example, you can
+test your relay controls using %-bh%.
++
+*Warning 1*:
+cindex:[RFC 1413]
+You cannot test features of the configuration that rely on
+ident (RFC 1413) callouts. These cannot be done when testing using
+%-bh% because there is no incoming SMTP connection.
++
+*Warning 2*: Address verification callouts (see section <<SECTcallver>>) are
+also skipped when testing using %-bh%. If you want these callouts to occur,
+use %-bhc% instead.
++
+Messages supplied during the testing session are discarded, and nothing is
+written to any of the real log files. There may be pauses when DNS (and other)
+lookups are taking place, and of course these may time out. The %-oMi% option
+can be used to specify a specific IP interface and port if this is important.
++
+The 'exim_checkaccess' utility is a ``packaged'' version of %-bh% whose
+output just states whether a given recipient address from a given host is
+acceptable or not. See section <<SECTcheckaccess>>.
+
+*-bhc*~<'IP~address'>::
+oindex:[%-bhc%]
+This option operates in the same way as %-bh%, except that address
+verification callouts are performed if required. This includes consulting and
+updating the callout cache database.
+
+*-bi*::
+oindex:[%-bi%]
+cindex:[alias file,building]
+cindex:[building alias file]
+cindex:[Sendmail compatibility,%-bi% option]
+Sendmail interprets the %-bi% option as a request to rebuild its alias file.
+Exim does not have the concept of a single alias file, and so it cannot mimic
+this behaviour. However, calls to _/usr/lib/sendmail_ with the %-bi% option
+tend to appear in various scripts such as NIS make files, so the option must be
+recognized.
++
+If %-bi% is encountered, the command specified by the %bi_command%
+configuration option is run, under the uid and gid of the caller of Exim. If
+the %-oA% option is used, its value is passed to the command as an argument.
+The command set by %bi_command% may not contain arguments. The command can use
+the 'exim_dbmbuild' utility, or some other means, to rebuild alias files if
+this is required. If the %bi_command% option is not set, calling Exim with
+%-bi% is a no-op.
+
+*-bm*::
+oindex:[%-bm%]
+cindex:[local message reception]
+This option runs an Exim receiving process that accepts an incoming,
+locally-generated message on the current input. The recipients are given as the
+command arguments (except when %-t% is also present -- see below). Each
+argument can be a comma-separated list of RFC 2822 addresses. This is the
+default option for selecting the overall action of an Exim call; it is assumed
+if no other conflicting option is present.
++
+If any addresses in the message are unqualified (have no domain), they are
+qualified by the values of the %qualify_domain% or %qualify_recipient%
+options, as appropriate. The %-bnq% option (see below) provides a way of
+suppressing this for special cases.
++
+Policy checks on the contents of local messages can be enforced by means of
+the non-SMTP ACL. See chapter <<CHAPACL>> for details.
++
+The return code
+cindex:[return code,for %-bm%]
+is zero if the message is successfully accepted. Otherwise, the
+action is controlled by the %-oe'x'% option setting -- see below.
++
+The format
+cindex:[message,format]
+cindex:[format,message]
+cindex:[``From'' line]
+cindex:[UUCP,``From'' line]
+cindex:[Sendmail compatibility,``From'' line]
+of the message must be as defined in RFC 2822, except that, for
+compatibility with Sendmail and Smail, a line in one of the forms
+
+ From sender Fri Jan 5 12:55 GMT 1997
+ From sender Fri, 5 Jan 97 12:55:01
++
+(with the weekday optional, and possibly with additional text after the date)
+is permitted to appear at the start of the message. There appears to be no
+authoritative specification of the format of this line. Exim recognizes it by
+matching against the regular expression defined by the %uucp_from_pattern%
+option, which can be changed if necessary.
++
+The
+cindex:[%-f% option,overriding ``From'' line]
+specified sender is treated as if it were given as the argument to the
+%-f% option, but if a %-f% option is also present, its argument is used in
+preference to the address taken from the message. The caller of Exim must be a
+trusted user for the sender of a message to be set in this way.
+
+*-bnq*::
+oindex:[%-bnq%]
+cindex:[address qualification, suppressing]
+By default, Exim automatically qualifies unqualified addresses (those
+without domains) that appear in messages that are submitted locally (that
+is, not over TCP/IP). This qualification applies both to addresses in
+envelopes, and addresses in header lines. Sender addresses are qualified using
+%qualify_domain%, and recipient addresses using %qualify_recipient% (which
+defaults to the value of %qualify_domain%).
++
+Sometimes, qualification is not wanted. For example, if %-bS% (batch SMTP) is
+being used to re-submit messages that originally came from remote hosts after
+content scanning, you probably do not want to qualify unqualified addresses in
+header lines. (Such lines will be present only if you have not enabled a header
+syntax check in the appropriate ACL.)
++
+The %-bnq% option suppresses all qualification of unqualified addresses in
+messages that originate on the local host. When this is used, unqualified
+addresses in the envelope provoke errors (causing message rejection) and
+unqualified addresses in header lines are left alone.
+
+
+*-bP*::
+oindex:[%-bP%]
+cindex:[configuration options, extracting]
+cindex:[options,configuration -- extracting]
+If this option is given with no arguments, it causes the values of all Exim's
+main configuration options to be written to the standard output. The values
+of one or more specific options can be requested by giving their names as
+arguments, for example:
+
+ exim -bP qualify_domain hold_domains
++
+However, any option setting that is preceded by the word ``hide'' in the
+configuration file is not shown in full, except to an admin user. For other
+users, the output is as in this example:
+
+ mysql_servers = <value not displayable>
++
+If %configure_file% is given as an argument, the name of the run time
+configuration file is output.
+If a list of configuration files was supplied, the value that is output here
+is the name of the file that was actually used.
++
+cindex:[daemon,process id (pid)]
+cindex:[pid (process id),of daemon]
+If %log_file_path% or %pid_file_path% are given, the names of the directories
+where log files and daemon pid files are written are output, respectively. If
+these values are unset, log files are written in a sub-directory of the spool
+directory called %log%, and the pid file is written directly into the spool
+directory.
++
+If %-bP% is followed by a name preceded by `+`, for example,
+
+ exim -bP +local_domains
++
+it searches for a matching named list of any type (domain, host, address, or
+local part) and outputs what it finds.
++
+If
+cindex:[options,router -- extracting]
+cindex:[options,transport -- extracting]
+one of the words %router%, %transport%, or %authenticator% is given,
+followed by the name of an appropriate driver instance, the option settings for
+that driver are output. For example:
+
+ exim -bP transport local_delivery
++
+The generic driver options are output first, followed by the driver's private
+options. A list of the names of drivers of a particular type can be obtained by
+using one of the words %router_list%, %transport_list%, or
+%authenticator_list%, and a complete list of all drivers with their option
+settings can be obtained by using %routers%, %transports%, or %authenticators%.
+
+
+*-bp*::
+oindex:[%-bp%]
+cindex:[queue,listing messages on]
+cindex:[listing,messages on the queue]
+This option requests a listing of the contents of the mail queue on the
+standard output. If the %-bp% option is followed by a list of message ids,
+just those messages are listed. By default, this option can be used only by an
+admin user. However, the %queue_list_requires_admin% option can be set false
+to allow any user to see the queue.
++
+Each message on the queue is displayed as in the following example:
+
+ 25m 2.9K 0t5C6f-0000c8-00 <alice@wonderland.fict.example>
+ red.king@looking-glass.fict.example
+ <other addresses>
++
+The
+cindex:[message,size in queue listing]
+cindex:[size,of message]
+first line contains the length of time the message has been on the queue
+(in this case 25 minutes), the size of the message (2.9K), the unique local
+identifier for the message, and the message sender, as contained in the
+envelope. For bounce messages, the sender address is empty, and appears as
+``<>''. If the message was submitted locally by an untrusted user who overrode
+the default sender address, the user's login name is shown in parentheses
+before the sender address.
++
+If
+cindex:[frozen messages,in queue listing]
+the message is frozen (attempts to deliver it are suspended) then the text
+``\*\*\* frozen \*\*\*'' is displayed at the end of this line.
++
+The recipients of the message (taken from the envelope, not the headers) are
+displayed on subsequent lines. Those addresses to which the message has already
+been delivered are marked with the letter D. If an original address gets
+expanded into several addresses via an alias or forward file, the original is
+displayed with a D only when deliveries for all of its child addresses are
+complete.
+
+
+*-bpa*::
+oindex:[%-bpa%]
+This option operates like %-bp%, but in addition it shows delivered addresses
+that were generated from the original top level address(es) in each message by
+alias or forwarding operations. These addresses are flagged with ``+D'' instead
+of just ``D''.
+
+
+*-bpc*::
+oindex:[%-bpc%]
+cindex:[queue,count of messages on]
+This option counts the number of messages on the queue, and writes the total
+to the standard output. It is restricted to admin users, unless
+%queue_list_requires_admin% is set false.
+
+
+*-bpr*::
+oindex:[%-bpr%]
+This option operates like %-bp%, but the output is not sorted into
+chronological order of message arrival. This can speed it up when there are
+lots of messages on the queue, and is particularly useful if the output is
+going to be post-processed in a way that doesn't need the sorting.
+
+*-bpra*::
+oindex:[%-bpra%]
+This option is a combination of %-bpr% and %-bpa%.
+
+*-bpru*::
+oindex:[%-bpru%]
+This option is a combination of %-bpr% and %-bpu%.
+
+
+*-bpu*::
+oindex:[%-bpu%]
+This option operates like %-bp% but shows only undelivered top-level addresses
+for each message displayed. Addresses generated by aliasing or forwarding are
+not shown, unless the message was deferred after processing by a router with
+the %one_time% option set.
+
+
+*-brt*::
+oindex:[%-brt%]
+cindex:[testing,retry configuration]
+cindex:[retry,configuration testing]
+This option is for testing retry rules, and it must be followed by up to three
+arguments. It causes Exim to look for a retry rule that matches the values
+and to write it to the standard output. For example:
+
+ exim -brt bach.comp.mus.example
+ Retry rule: *.comp.mus.example F,2h,15m; F,4d,30m;
++
+See chapter <<CHAPretry>> for a description of Exim's retry rules. The first
+argument, which is required, can be a complete address in the form
+'local_part@domain', or it can be just a domain name. The second argument is
+an optional second domain name; if no retry rule is found for the first
+argument, the second is tried. This ties in with Exim's behaviour when looking
+for retry rules for remote hosts -- if no rule is found that matches the host,
+one that matches the mail domain is sought. The final argument is the name of a
+specific delivery error, as used in setting up retry rules, for example
+``quota_3d''.
+
+*-brw*::
+oindex:[%-brw%]
+cindex:[testing,rewriting]
+cindex:[rewriting,testing]
+This option is for testing address rewriting rules, and it must be followed by
+a single argument, consisting of either a local part without a domain, or a
+complete address with a fully qualified domain. Exim outputs how this address
+would be rewritten for each possible place it might appear. See chapter
+<<CHAPrewrite>> for further details.
+
+*-bS*::
+oindex:[%-bS%]
+cindex:[SMTP,batched incoming]
+cindex:[batched SMTP input]
+This option is used for batched SMTP input, which is an alternative interface
+for non-interactive local message submission. A number of messages can be
+submitted in a single run. However, despite its name, this is not really SMTP
+input. Exim reads each message's envelope from SMTP commands on the standard
+input, but generates no responses. If the caller is trusted, or
+%untrusted_set_sender% is set, the senders in the SMTP MAIL commands are
+believed; otherwise the sender is always the caller of Exim.
++
+The message itself is read from the standard input, in SMTP format (leading
+dots doubled), terminated by a line containing just a single dot. An error is
+provoked if the terminating dot is missing. A further message may then follow.
++
+As for other local message submissions, the contents of incoming batch SMTP
+messages can be checked using the non-SMTP ACL (see chapter <<CHAPACL>>).
+Unqualified addresses are automatically qualified using %qualify_domain% and
+%qualify_recipient%, as appropriate, unless the %-bnq% option is used.
++
+Some other SMTP commands are recognized in the input. HELO and EHLO act
+as RSET; VRFY, EXPN, ETRN, and HELP act as NOOP;
+QUIT quits, ignoring the rest of the standard input.
++
+cindex:[return code,for %-bS%]
+If any error is encountered, reports are written to the standard output and
+error streams, and Exim gives up immediately. The return code is 0 if no error
+was detected; it is 1 if one or more messages were accepted before the error
+was detected; otherwise it is 2.
++
+More details of input using batched SMTP are given in section
+<<SECTincomingbatchedSMTP>>.
+
+*-bs*::
+oindex:[%-bs%]
+cindex:[SMTP,local input]
+cindex:[local SMTP input]
+This option causes Exim to accept one or more messages by reading SMTP commands
+on the standard input, and producing SMTP replies on the standard output. SMTP
+policy controls, as defined in ACLs (see chapter <<CHAPACL>>) are applied.
+Some user agents use this interface as a way of passing locally-generated
+messages to the MTA.
++
+In
+cindex:[sender,source of]
+this usage, if the caller of Exim is trusted, or %untrusted_set_sender% is
+set, the senders of messages are taken from the SMTP MAIL commands.
+Otherwise the content of these commands is ignored and the sender is set up as
+the calling user. Unqualified addresses are automatically qualified using
+%qualify_domain% and %qualify_recipient%, as appropriate, unless the %-bnq%
+option is used.
++
+cindex:[inetd]
+The
+%-bs% option is also used to run Exim from 'inetd', as an alternative to using
+a listening daemon. Exim can distinguish the two cases by checking whether the
+standard input is a TCP/IP socket. When Exim is called from 'inetd', the source
+of the mail is assumed to be remote, and the comments above concerning senders
+and qualification do not apply. In this situation, Exim behaves in exactly the
+same way as it does when receiving a message via the listening daemon.
+
+*-bt*::
+oindex:[%-bt%]
+cindex:[testing,addresses]
+cindex:[address,testing]
+This option runs Exim in address testing mode, in which each argument is taken
+as an address to be tested for deliverability. The results are written to the
+standard output. If a test fails, and the caller is not an admin user, no
+details of the failure are output, because these might contain sensitive
+information such as usernames and passwords for database lookups.
++
+If no arguments are given, Exim runs in an interactive manner, prompting with a
+right angle bracket for addresses to be tested.
++
+Unlike the %-be% test option, you cannot arrange for Exim to use the
+'readline()' function, because it is running as 'root' and there are
+security issues.
++
+Each address is handled as if it were the recipient address of a message
+(compare the %-bv% option). It is passed to the routers and the result is
+written to the standard output. However, any router that has
+%no_address_test% set is bypassed. This can make %-bt% easier to use for
+genuine routing tests if your first router passes everything to a scanner
+program.
++
+The
+cindex:[return code,for %-bt%]
+return code is 2 if any address failed outright; it is 1 if no address
+failed outright but at least one could not be resolved for some reason. Return
+code 0 is given only when all addresses succeed.
++
+*Warning*: %-bt% can only do relatively simple testing. If any of the
+routers in the configuration makes any tests on the sender address of a
+message,
+cindex:[%-f% option,for address testing]
+you can use the %-f% option to set an appropriate sender when running
+%-bt% tests. Without it, the sender is assumed to be the calling user at the
+default qualifying domain. However, if you have set up (for example) routers
+whose behaviour depends on the contents of an incoming message, you cannot test
+those conditions using %-bt%. The %-N% option provides a possible way of
+doing such tests.
+
+*-bV*::
+oindex:[%-bV%]
+cindex:[version number of Exim, verifying]
+This option causes Exim to write the current version number, compilation
+number, and compilation date of the 'exim' binary to the standard output.
+It also lists the DBM library this is being used, the optional modules (such as
+specific lookup types), the drivers that are included in the binary, and the
+name of the run time configuration file that is in use.
++
+As part of its operation, %-bV% causes Exim to read and syntax check its
+configuration file. However, this is a static check only. It cannot check
+values that are to be expanded. For example, although a misspelt ACL verb is
+detected, an error in the verb's arguments is not. You cannot rely on %-bV%
+alone to discover (for example) all the typos in the configuration; some
+realistic testing is needed. The %-bh% and %-N% options provide more dynamic
+testing facilities.
+
+*-bv*::
+oindex:[%-bv%]
+cindex:[verifying address, using %-bv%]
+cindex:[address,verification]
+This option runs Exim in address verification mode, in which each argument is
+taken as an address to be verified. During normal operation, verification
+happens mostly as a consequence processing a %verify% condition in an ACL (see
+chapter <<CHAPACL>>). If you want to test an entire ACL, see the %-bh% option.
++
+If verification fails, and the caller is not an admin user, no details of the
+failure are output, because these might contain sensitive information such as
+usernames and passwords for database lookups.
++
+If no arguments are given, Exim runs in an interactive manner, prompting with a
+right angle bracket for addresses to be verified.
++
+Unlike the %-be% test option, you cannot arrange for Exim to use the
+'readline()' function, because it is running as 'exim' and there are
+security issues.
++
+Verification differs from address testing (the %-bt% option) in that routers
+that have %no_verify% set are skipped, and if the address is accepted by a
+router that has %fail_verify% set, verification fails. The address is verified
+as a recipient if %-bv% is used; to test verification for a sender address,
+%-bvs% should be used.
++
+If the %-v% option is not set, the output consists of a single line for each
+address, stating whether it was verified or not, and giving a reason in the
+latter case. Otherwise, more details are given of how the address has been
+handled, and in the case of address redirection, all the generated addresses
+are also considered. Without %-v%, generating more than one address by
+redirection causes verification to end sucessfully.
++
+The
+cindex:[return code,for %-bv%]
+return code is 2 if any address failed outright; it is 1 if no address
+failed outright but at least one could not be resolved for some reason. Return
+code 0 is given only when all addresses succeed.
++
+If any of the routers in the configuration makes any tests on the sender
+address of a message, you should use the %-f% option to set an appropriate
+sender when running %-bv% tests. Without it, the sender is assumed to be the
+calling user at the default qualifying domain.
+
+*-bvs*::
+oindex:[%-bvs%]
+This option acts like %-bv%, but verifies the address as a sender rather
+than a recipient address. This affects any rewriting and qualification that
+might happen.
+
+*-C*~<'filelist'>::
+oindex:[%-C%]
+cindex:[configuration file,alternate]
+cindex:[CONFIGURE_FILE]
+cindex:[alternate configuration file]
+This option causes Exim to find the run time configuration file from the given
+list instead of from the list specified by the CONFIGURE_FILE
+compile-time setting. Usually, the list will consist of just a single file
+name, but it can be a colon-separated list of names. In this case, the first
+file that exists is used. Failure to open an existing file stops Exim from
+proceeding any further along the list, and an error is generated.
++
+When this option is used by a caller other than root or the Exim user, and the
+list is different from the compiled-in list, Exim gives up its root privilege
+immediately, and runs with the real and effective uid and gid set to those of
+the caller. However, if ALT_CONFIG_ROOT_ONLY is defined in
+_Local/Makefile_, root privilege is retained for %-C% only if the caller of
+Exim is root.
++
+That is, the Exim user is no longer privileged in this regard. This build-time
+option is not set by default in the Exim source distribution tarbundle.
+However, if you are using a ``packaged'' version of Exim (source or binary), the
+packagers might have enabled it.
++
+Setting ALT_CONFIG_ROOT_ONLY locks out the possibility of testing a
+configuration using %-C% right through message reception and delivery, even if
+the caller is root. The reception works, but by that time, Exim is running as
+the Exim user, so when it re-execs to regain privilege for the delivery, the
+use of %-C% causes privilege to be lost. However, root can test reception and
+delivery using two separate commands (one to put a message on the queue, using
+%-odq%, and another to do the delivery, using %-M%).
++
+If ALT_CONFIG_PREFIX is defined _in Local/Makefile_, it specifies a
+prefix string with which any file named in a %-C% command line option
+must start. In addition, the file name must not contain the sequence `/../`.
+However, if the value of the %-C% option is identical to the value of
+CONFIGURE_FILE in _Local/Makefile_, Exim ignores %-C% and proceeds as
+usual. There is no default setting for ALT_CONFIG_PREFIX; when it is
+unset, any file name can be used with %-C%.
++
+ALT_CONFIG_PREFIX can be used to confine alternative configuration files
+to a directory to which only root has access. This prevents someone who has
+broken into the Exim account from running a privileged Exim with an arbitrary
+configuration file.
++
+The %-C% facility is useful for ensuring that configuration files are
+syntactically correct, but cannot be used for test deliveries, unless the
+caller is privileged, or unless it is an exotic configuration that does not
+require privilege. No check is made on the owner or group of the files
+specified by this option.
+
+*-D*<'macro'>=<'value'>::
+oindex:[%-D%]
+cindex:[macro,setting on command line]
+This option can be used to override macro definitions in the configuration file
+(see section <<SECTmacrodefs>>). However, like %-C%, if it is used by an
+unprivileged caller, it causes Exim to give up its root privilege.
+If DISABLE_D_OPTION is defined in _Local/Makefile_, the use of %-D% is
+completely disabled, and its use causes an immediate error exit.
++
+The entire option (including equals sign if present) must all be within one
+command line item. %-D% can be used to set the value of a macro to the empty
+string, in which case the equals sign is optional. These two commands are
+synonymous:
+
+ exim -DABC ...
+ exim -DABC= ...
++
+To include spaces in a macro definition item, quotes must be used. If you use
+quotes, spaces are permitted around the macro name and the equals sign. For
+example:
+
+ exim '-D ABC = something' ...
++
+%-D% may be repeated up to 10 times on a command line.
+
+*-d*<'debug~options'>::
+oindex:[%-d%]
+cindex:[debugging,list of selectors]
+cindex:[debugging,%-d% option]
+This option causes debugging information to be written to the standard
+error stream. It is restricted to admin users because debugging output may show
+database queries that contain password information. Also, the details of users'
+filter files should be protected. When %-d% is used, %-v% is assumed. If
+%-d% is given on its own, a lot of standard debugging data is output. This can
+be reduced, or increased to include some more rarely needed information, by
+following %-d% with a string made up of names preceded by plus or minus
+characters. These add or remove sets of debugging data, respectively. For
+example, %-d+filter% adds filter debugging, whereas %-d-all+filter% selects
+only filter debugging. The available debugging categories are:
++
+&&&
+`acl ` ACL interpretation
+`auth ` authenticators
+`deliver ` general delivery logic
+`dns ` DNS lookups (see also resolver)
+`dnsbl ` DNS black list (aka RBL) code
+`exec ` arguments for ^^execv()^^ calls
+`expand ` detailed debugging for string expansions
+`filter ` filter handling
+`hints_lookup ` hints data lookups
+`host_lookup ` all types of name-to-IP address handling
+`ident ` ident lookup
+`interface ` lists of local interfaces
+`lists ` matching things in lists
+`load ` system load checks
+`local_scan ` can be used by ^^local_scan()^^ (see chapter <<CHAPlocalscan>>)
+`lookup ` general lookup code and all lookups
+`memory ` memory handling
+`pid ` add pid to debug output lines
+`process_info ` setting info for the process log
+`queue_run ` queue runs
+`receive ` general message reception logic
+`resolver ` turn on the DNS resolver's debugging output
+`retry ` retry handling
+`rewrite ` address rewriting
+`route ` address routing
+`timestamp ` add timestamp to debug output lines
+`tls ` TLS logic
+`transport ` transports
+`uid ` changes of uid/gid and looking up uid/gid
+`verify ` address verification logic
+`all ` all of the above, and also %-v%
+&&&
++
+The
+cindex:[resolver, debugging output]
+cindex:[DNS resolver, debugging output]
+`resolver` option produces output only if the DNS resolver was compiled
+with DEBUG enabled. This is not the case in some operating systems. Also,
+unfortunately, debugging output from the DNS resolver is written to stdout
+rather than stderr.
++
+The default (%-d% with no argument) omits `expand`, `filter`,
+`interface`, `load`, `memory`, `pid`, `resolver`, and `timestamp`.
+However, the `pid` selector is forced when debugging is turned on for a
+daemon, which then passes it on to any re-executed Exims. Exim also
+automatically adds the pid to debug lines when several remote deliveries are
+run in parallel.
++
+The `timestamp` selector causes the current time to be inserted at the start
+of all debug output lines. This can be useful when trying to track down delays
+in processing.
++
+If the %debug_print% option is set in any driver, it produces output whenever
+any debugging is selected, or if %-v% is used.
+
+*-dd*<'debug~options'>::
+oindex:[%-dd%]
+This option behaves exactly like %-d% except when used on a command that
+starts a daemon process. In that case, debugging is turned off for the
+subprocesses that the daemon creates. Thus, it is useful for monitoring the
+behaviour of the daemon without creating as much output as full debugging does.
+
+*-dropcr*::
+oindex:[%-dropcr%]
+This is an obsolete option that is now a no-op. It used to affect the way Exim
+handled CR and LF characters in incoming messages. What happens now is
+described in section <<SECTlineendings>>.
+
+*-E*::
+oindex:[%-E%]
+cindex:[bounce message,generating]
+This option specifies that an incoming message is a locally-generated delivery
+failure report. It is used internally by Exim when handling delivery failures
+and is not intended for external use. Its only effect is to stop Exim
+generating certain messages to the postmaster, as otherwise message cascades
+could occur in some situations. As part of the same option, a message id may
+follow the characters %-E%. If it does, the log entry for the receipt of the
+new message contains the id, following ``R='', as a cross-reference.
+
+*-e*'x'::
+oindex:[%-e'x'%]
+There are a number of Sendmail options starting with %-oe% which seem to be
+called by various programs without the leading %o% in the option. For example,
+the %vacation% program uses %-eq%. Exim treats all options of the form
+%-e'x'% as synonymous with the corresponding %-oe'x'% options.
+
+*-F*~<'string'>::
+oindex:[%-F%]
+cindex:[sender,name]
+cindex:[name,of sender]
+This option sets the sender's full name for use when a locally-generated
+message is being accepted. In the absence of this option, the user's 'gecos'
+entry from the password data is used. As users are generally permitted to alter
+their 'gecos' entries, no security considerations are involved. White space
+between %-F% and the <'string'> is optional.
+
+*-f*~<'address'>::
+oindex:[%-f%]
+cindex:[sender,address]
+cindex:[address,sender]
+cindex:[trusted user]
+cindex:[envelope sender]
+cindex:[user,trusted]
+This option sets the address of the envelope sender of a locally-generated
+message (also known as the return path). The option can normally be used only
+by a trusted user, but %untrusted_set_sender% can be set to allow untrusted
+users to use it.
++
+Processes running as root or the Exim user are always trusted. Other
+trusted users are defined by the %trusted_users% or %trusted_groups% options.
+In the absence of %-f%, or if the caller is not trusted, the sender of a local
+message is set to the caller's login name at the default qualify domain.
++
+There is one exception to the restriction on the use of %-f%: an empty sender
+can be specified by any user, trusted or not, to create a message that can
+never provoke a bounce. An empty sender can be specified either as an empty
+string, or as a pair of angle brackets with nothing between them, as in these
+examples of shell commands:
+
+ exim -f '<>' user@domain
+ exim -f "" user@domain
++
+In addition, the use of %-f% is not restricted when testing a filter file with
+%-bf% or when testing or verifying addresses using the %-bt% or %-bv%
+options.
++
+Allowing untrusted users to change the sender address does not of itself make
+it possible to send anonymous mail. Exim still checks that the 'From:' header
+refers to the local user, and if it does not, it adds a 'Sender:' header,
+though this can be overridden by setting %no_local_from_check%.
++
+White
+cindex:[``From'' line]
+space between %-f% and the <'address'> is optional (that is, they can be given
+as two arguments or one combined argument). The sender of a locally-generated
+message can also be set (when permitted) by an initial ``From '' line in the
+message -- see the description of %-bm% above -- but if %-f% is also present,
+it overrides ``From''.
+
+*-G*::
+oindex:[%-G%]
+cindex:[Sendmail compatibility,%-G% option ignored]
+This is a Sendmail option which is ignored by Exim.
+
+*-h*~<'number'>::
+oindex:[%-h%]
+cindex:[Sendmail compatibility,%-h% option ignored]
+This option is accepted for compatibility with Sendmail, but has no effect. (In
+Sendmail it overrides the ``hop count'' obtained by counting 'Received:'
+headers.)
+
+*-i*::
+oindex:[%-i%]
+cindex:[Solaris,'mail' command]
+cindex:[dot in incoming, non-SMTP message]
+This option, which has the same effect as %-oi%, specifies that a dot on a line
+by itself should not terminate an incoming, non-SMTP message. I can find no
+documentation for this option in Solaris 2.4 Sendmail, but the 'mailx' command
+in Solaris 2.4 uses it. See also %-ti%.
+
+*-M*~<'message~id'>~<'message~id'>~...::
+oindex:[%-M%]
+cindex:[forcing delivery]
+cindex:[delivery,forcing attempt]
+cindex:[frozen messages,forcing delivery]
+This option requests Exim to run a delivery attempt on each message in turn. If
+any of the messages are frozen, they are automatically thawed before the
+delivery attempt. The settings of %queue_domains%, %queue_smtp_domains%, and
+%hold_domains% are ignored.
++
+Retry
+cindex:[hints database,overriding retry hints]
+hints for any of the addresses are overridden -- Exim tries to deliver even if
+the normal retry time has not yet been reached. This option requires the caller
+to be an admin user. However, there is an option called %prod_requires_admin%
+which can be set false to relax this restriction (and also the same requirement
+for the %-q%, %-R%, and %-S% options).
+
+*-Mar*~<'message~id'>~<'address'>~<'address'>~...::
+oindex:[%-Mar%]
+cindex:[message,adding recipients]
+cindex:[recipient,adding]
+This option requests Exim to add the addresses to the list of recipients of the
+message (``ar'' for ``add recipients''). The first argument must be a message id,
+and the remaining ones must be email addresses. However, if the message is
+active (in the middle of a delivery attempt), it is not altered. This option
+can be used only by an admin user.
+
+*-MC*~<'transport'>~<'hostname'>~<'sequence~number'>~<'message~id'>::
+oindex:[%-MC%]
+cindex:[SMTP,passed connection]
+cindex:[SMTP,multiple deliveries]
+cindex:[multiple SMTP deliveries]
+This option is not intended for use by external callers. It is used internally
+by Exim to invoke another instance of itself to deliver a waiting message using
+an existing SMTP connection, which is passed as the standard input. Details are
+given in chapter <<CHAPSMTP>>. This must be the final option, and the caller must
+be root or the Exim user in order to use it.
+
+*-MCA*::
+oindex:[%-MCA%]
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the %-MC% option. It signifies that the connection
+to the remote host has been authenticated.
+
+*-MCP*::
+oindex:[%-MCP%]
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the %-MC% option. It signifies that the server to
+which Exim is connected supports pipelining.
+
+*-MCQ*~<'process~id'>~<'pipe~fd'>::
+oindex:[%-MCQ%]
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the %-MC% option when the original delivery was
+started by a queue runner. It passes on the process id of the queue runner,
+together with the file descriptor number of an open pipe. Closure of the pipe
+signals the final completion of the sequence of processes that are passing
+messages through the same SMTP connection.
+
+*-MCS*::
+oindex:[%-MCS%]
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the %-MC% option, and passes on the fact that the
+SMTP SIZE option should be used on messages delivered down the existing
+connection.
+
+*-MCT*::
+oindex:[%-MCT%]
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the %-MC% option, and passes on the fact that the
+host to which Exim is connected supports TLS encryption.
+
+*-Mc*~<'message~id'>~<'message~id'>~...::
+oindex:[%-Mc%]
+cindex:[hints database,not overridden by %-Mc%]
+cindex:[delivery,manually started -- not forced]
+This option requests Exim to run a delivery attempt on each message in turn,
+but unlike the %-M% option, it does check for retry hints, and respects any
+that are found. This option is not very useful to external callers. It is
+provided mainly for internal use by Exim when it needs to re-invoke itself in
+order to regain root privilege for a delivery (see chapter <<CHAPsecurity>>).
+However, %-Mc% can be useful when testing, in order to run a delivery that
+respects retry times and other options such as %hold_domains% that are
+overridden when %-M% is used. Such a delivery does not count as a queue run.
+If you want to run a specific delivery as if in a queue run, you should use
+%-q% with a message id argument. A distinction between queue run deliveries
+and other deliveries is made in one or two places.
+
+*-Mes*~<'message~id'>~<'address'>::
+oindex:[%-Mes%]
+cindex:[message,changing sender]
+cindex:[sender,changing]
+This option requests Exim to change the sender address in the message to the
+given address, which must be a fully qualified address or ``<>'' (``es'' for ``edit
+sender''). There must be exactly two arguments. The first argument must be a
+message id, and the second one an email address. However, if the message is
+active (in the middle of a delivery attempt), its status is not altered. This
+option can be used only by an admin user.
+
+*-Mf*~<'message~id'>~<'message~id'>~...::
+oindex:[%-Mf%]
+cindex:[freezing messages]
+cindex:[message,manually freezing]
+This option requests Exim to mark each listed message as ``frozen''. This
+prevents any delivery attempts taking place until the message is ``thawed'',
+either manually or as a result of the %auto_thaw% configuration option.
+However, if any of the messages are active (in the middle of a delivery
+attempt), their status is not altered. This option can be used only by an admin
+user.
+
+*-Mg*~<'message~id'>~<'message~id'>~...::
+oindex:[%-Mg%]
+cindex:[giving up on messages]
+cindex:[message,abandoning delivery attempts]
+cindex:[delivery,abandoning further attempts]
+This option requests Exim to give up trying to deliver the listed messages,
+including any that are frozen. However, if any of the messages are active,
+their status is not altered. For non-bounce messages, a delivery error message
+is sent to the sender, containing the text ``cancelled by administrator''.
+Bounce messages are just discarded. This option can be used only by an admin
+user.
+
+*-Mmad*~<'message~id'>~<'message~id'>~...::
+oindex:[%-Mmad%]
+cindex:[delivery,cancelling all]
+This option requests Exim to mark all the recipient addresses in the messages
+as already delivered (``mad'' for ``mark all delivered''). However, if any
+message is active (in the middle of a delivery attempt), its status is not
+altered. This option can be used only by an admin user.
+
+*-Mmd*~<'message~id'>~<'address'>~<'address'>~...::
+oindex:[%-Mmd%]
+cindex:[delivery,cancelling by address]
+cindex:[recipient,removing]
+cindex:[removing recipients]
+This option requests Exim to mark the given addresses as already delivered
+(``md'' for ``mark delivered''). The first argument must be a message id, and
+the remaining ones must be email addresses. These are matched to recipient
+addresses in the message in a case-sensitive manner. If the message is active
+(in the middle of a delivery attempt), its status is not altered. This option
+can be used only by an admin user.
+
+*-Mrm*~<'message~id'>~<'message~id'>~...::
+oindex:[%-Mrm%]
+cindex:[removing messages]
+cindex:[abandoning mail]
+cindex:[message,manually discarding]
+This option requests Exim to remove the given messages from the queue. No
+bounce messages are sent; each message is simply forgotten. However, if any of
+the messages are active, their status is not altered. This option can be used
+only by an admin user or by the user who originally caused the message to be
+placed on the queue.
+
+*-Mt*~<'message~id'>~<'message~id'>~...::
+oindex:[%-Mt%]
+cindex:[thawing messages]
+cindex:[unfreezing messages]
+cindex:[frozen messages,thawing]
+cindex:[message,thawing frozen]
+This option requests Exim to ``thaw'' any of the listed messages that are
+``frozen'', so that delivery attempts can resume. However, if any of the messages
+are active, their status is not altered. This option can be used only by an
+admin user.
+
+*-Mvb*~<'message~id'>::
+oindex:[%-Mvb%]
+cindex:[listing,message body]
+cindex:[message,listing body of]
+This option causes the contents of the message body (-D) spool file to be
+written to the standard output. This option can be used only by an admin user.
+
+*-Mvh*~<'message~id'>::
+oindex:[%-Mvh%]
+cindex:[listing,message headers]
+cindex:[header lines,listing]
+cindex:[message,listing header lines]
+This option causes the contents of the message headers (-H) spool file to be
+written to the standard output. This option can be used only by an admin user.
+
+*-Mvl*~<'message~id'>::
+oindex:[%-Mvl%]
+cindex:[listing,message log]
+cindex:[message,listing message log]
+This option causes the contents of the message log spool file to be written to
+the standard output. This option can be used only by an admin user.
+
+*-m*::
+oindex:[%-m%]
+This is apparently a synonym for %-om% that is accepted by Sendmail, so Exim
+treats it that way too.
+
+*-N*::
+oindex:[%-N%]
+cindex:[debugging,%-N% option]
+cindex:[debugging,suppressing delivery]
+This is a debugging option that inhibits delivery of a message at the transport
+level. It implies %-v%. Exim goes through many of the motions of delivery --
+it just doesn't actually transport the message, but instead behaves as if it
+had successfully done so. However, it does not make any updates to the retry
+database, and the log entries for deliveries are flagged with ``\*>'' rather
+than ``=>''.
++
+Because %-N% discards any message to which it applies, only root or the Exim
+user are allowed to use it with %-bd%, %-q%, %-R% or %-M%. In other words,
+an ordinary user can use it only when supplying an incoming message to which it
+will apply. Although transportation never fails when %-N% is set, an address
+may be deferred because of a configuration problem on a transport, or a routing
+problem. Once %-N% has been used for a delivery attempt, it sticks to the
+message, and applies to any subsequent delivery attempts that may happen for
+that message.
+
+*-n*::
+oindex:[%-n%]
+cindex:[Sendmail compatibility,%-n% option ignored]
+This option is interpreted by Sendmail to mean ``no aliasing''. It is ignored by
+Exim.
+
+*-O*~<'data'>::
+oindex:[%-O%]
+This option is interpreted by Sendmail to mean `set option`. It is ignored by
+Exim.
+
+*-oA*~<'file~name'>::
+oindex:[%-oA%]
+cindex:[Sendmail compatibility,%-oA% option]
+This option is used by Sendmail in conjunction with %-bi% to specify an
+alternative alias file name. Exim handles %-bi% differently; see the
+description above.
+
+*-oB*~<'n'>::
+oindex:[%-oB%]
+cindex:[SMTP,passed connection]
+cindex:[SMTP,multiple deliveries]
+cindex:[multiple SMTP deliveries]
+This is a debugging option which limits the maximum number of messages that can
+be delivered down one SMTP connection, overriding the value set in any ^smtp^
+transport. If <'n'> is omitted, the limit is set to 1.
+
+*-odb*::
+oindex:[%-odb%]
+cindex:[background delivery]
+cindex:[delivery,in the background]
+This option applies to all modes in which Exim accepts incoming messages,
+including the listening daemon. It requests ``background'' delivery of such
+messages, which means that the accepting process automatically starts a
+delivery process for each message received, but does not wait for the delivery
+processes to finish.
++
+When all the messages have been received, the reception process exits,
+leaving the delivery processes to finish in their own time. The standard output
+and error streams are closed at the start of each delivery process.
+This is the default action if none of the %-od% options are present.
++
+If one of the queueing options in the configuration file
+(%queue_only% or %queue_only_file%, for example) is in effect, %-odb%
+overrides it if %queue_only_override% is set true, which is the default
+setting. If %queue_only_override% is set false, %-odb% has no effect.
+
+*-odf*::
+oindex:[%-odf%]
+cindex:[foreground delivery]
+cindex:[delivery,in the foreground]
+This option requests ``foreground'' (synchronous) delivery when Exim has accepted
+a locally-generated message. (For the daemon it is exactly the same as
+%-odb%.) A delivery process is automatically started to deliver the
+message, and Exim waits for it to complete before proceeding.
++
+The original Exim reception process does not finish until the delivery
+process for the final message has ended. The standard error stream is left open
+during deliveries.
++
+However, like %-odb%, this option has no effect if %queue_only_override% is
+false and one of the queueing options in the configuration file is in effect.
++
+If there is a temporary delivery error during foreground delivery, the
+message is left on the queue for later delivery, and the original reception
+process exists. See chapter <<CHAPnonqueueing>> for a way of setting up a
+restricted configuration that never queues messages.
+
+
+*-odi*::
+oindex:[%-odi%]
+This option is synonymous with %-odf%. It is provided for compatibility with
+Sendmail.
+
+*-odq*::
+oindex:[%-odq%]
+cindex:[non-immediate delivery]
+cindex:[delivery,suppressing immediate]
+cindex:[queueing incoming messages]
+This option applies to all modes in which Exim accepts incoming messages,
+including the listening daemon. It specifies that the accepting process should
+not automatically start a delivery process for each message received. Messages
+are placed on the queue, and remain there until a subsequent queue runner
+process encounters them. There are several configuration options (such as
+%queue_only%) that can be used to queue incoming messages under certain
+conditions. This option overrides all of them and also %-odqs%. It always
+forces queueing.
+
+*-odqs*::
+oindex:[%-odqs%]
+cindex:[SMTP,delaying delivery]
+This option is a hybrid between %-odb%/%-odi% and %-odq%.
+However, like %-odb% and %-odi%, this option has no effect if
+%queue_only_override% is false and one of the queueing options in the
+configuration file is in effect.
++
+When %-odqs% does operate, a delivery process is started for each incoming
+message, in the background by default, but in the foreground if %-odi% is also
+present. The recipient addresses are routed, and local deliveries are done in
+the normal way. However, if any SMTP deliveries are required, they are not done
+at this time, so the message remains on the queue until a subsequent queue
+runner process encounters it. Because routing was done, Exim knows which
+messages are waiting for which hosts, and so a number of messages for the same
+host can be sent in a single SMTP connection. The %queue_smtp_domains%
+configuration option has the same effect for specific domains. See also the
+%-qq% option.
+
+*-oee*::
+oindex:[%-oee%]
+cindex:[error,reporting]
+If an error is detected while a non-SMTP message is being received (for
+example, a malformed address), the error is reported to the sender in a mail
+message.
++
+Provided
+cindex:[return code,for %-oee%]
+this error message is successfully sent, the Exim receiving process
+exits with a return code of zero. If not, the return code is 2 if the problem
+is that the original message has no recipients, or 1 any other error. This is
+the default %-oe'x'% option if Exim is called as 'rmail'.
+
+*-oem*::
+oindex:[%-oem%]
+cindex:[error,reporting]
+cindex:[return code,for %-oem%]
+This is the same as %-oee%, except that Exim always exits with a non-zero
+return code, whether or not the error message was successfully sent.
+This is the default %-oe'x'% option, unless Exim is called as 'rmail'.
+
+*-oep*::
+oindex:[%-oep%]
+cindex:[error,reporting]
+If an error is detected while a non-SMTP message is being received, the
+error is reported by writing a message to the standard error file (stderr).
+cindex:[return code,for %-oep%]
+The return code is 1 for all errors.
+
+*-oeq*::
+oindex:[%-oeq%]
+cindex:[error,reporting]
+This option is supported for compatibility with Sendmail, but has the same
+effect as %-oep%.
+
+*-oew*::
+oindex:[%-oew%]
+cindex:[error,reporting]
+This option is supported for compatibility with Sendmail, but has the same
+effect as %-oem%.
+
+*-oi*::
+oindex:[%-oi%]
+cindex:[dot in incoming, non-SMTP message]
+This option, which has the same effect as %-i%, specifies that a dot on a line
+by itself should not terminate an incoming, non-SMTP message.
+Otherwise, a single dot does terminate, though Exim does no special processing
+for other lines that start with a dot.
+This option is set by default if Exim is called as 'rmail'. See also %-ti%.
+
+*-oitrue*::
+oindex:[%-oitrue%]
+This option is treated as synonymous with %-oi%.
+
+*-oMa*~<'host~address'>::
+oindex:[%-oMa%]
+cindex:[sender host address, specifying for local message]
+A number of options starting with %-oM% can be used to set values associated
+with remote hosts on locally-submitted messages (that is, messages not received
+over TCP/IP). These options can be used by any caller in conjunction with the
+%-bh%, %-be%, %-bf%, %-bF%, %-bt%, or %-bv% testing options. In other
+circumstances, they are ignored unless the caller is trusted.
++
+The %-oMa% option sets the sender host address. This may include a port number
+at the end, after a full stop (period). For example:
+
+ exim -bs -oMa 10.9.8.7.1234
++
+An alternative syntax is to enclose the IP address in square brackets,
+followed by a colon and the port number:
+
+ exim -bs -oMa [10.9.8.7]:1234
++
+The IP address is placed in the $sender_host_address$ variable, and the
+port, if present, in $sender_host_port$.
+
+*-oMaa*~<'name'>::
+oindex:[%-oMaa%]
+cindex:[authentication name, specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMaa%
+option sets the value of $sender_host_authenticated$ (the authenticator
+name). See chapter <<CHAPSMTPAUTH>> for a discussion of SMTP authentication.
+
+*-oMai*~<'string'>::
+oindex:[%-oMai%]
+cindex:[authentication id, specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMai%
+option sets the value of $authenticated_id$ (the id that was authenticated).
+This overrides the default value (the caller's login id) for messages from
+local sources. See chapter <<CHAPSMTPAUTH>> for a discussion of authenticated
+ids.
+
+*-oMas*~<'address'>::
+oindex:[%-oMas%]
+cindex:[authentication sender, specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMas%
+option sets the authenticated sender value in $authenticated_sender$. It
+overrides the sender address that is created from the caller's login id for
+messages from local sources. See chapter <<CHAPSMTPAUTH>> for a discussion of
+authenticated senders.
+
+*-oMi*~<'interface~address'>::
+oindex:[%-oMi%]
+cindex:[interface address, specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMi% option
+sets the IP interface address value. A port number may be included, using the
+same syntax as for %-oMa%. The interface address is placed in
+$interface_address$ and the port number, if present, in $interface_port$.
+
+*-oMr*~<'protocol~name'>::
+oindex:[%-oMr%]
+cindex:[protocol,incoming -- specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMr% option
+sets the received protocol value that is stored in $received_protocol$.
+However, this applies only when %-bs% is not used. For interactive SMTP input
+(%-bs%), the protocol is always ``local-'' followed by one of the standard SMTP
+protocol names (see the description of $received_protocol$ in section
+<<SECTexpvar>>). For %-bS% (batch SMTP) however, the protocol can be set by
+<<%-oMr%.
+
+*-oMs*~<'host~name'>::
+oindex:[%-oMs%]
+cindex:[sender host name, specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMs% option
+sets the sender host name in $sender_host_name$. When this option is present,
+Exim does not attempt to look up a host name from an IP address; it uses the
+name it is given.
+
+*-oMt*~<'ident~string'>::
+oindex:[%-oMt%]
+cindex:[sender ident string, specifying for local message]
+See %-oMa% above for general remarks about the %-oM% options. The %-oMt% option
+sets the sender ident value in $sender_ident$. The default setting for local
+callers is the login id of the calling process.
+
+*-om*::
+oindex:[%-om%]
+cindex:[Sendmail compatibility,%-om% option ignored]
+In Sendmail, this option means ``me too'', indicating that the sender of a
+message should receive a copy of the message if the sender appears in an alias
+expansion. Exim always does this, so the option does nothing.
+
+*-oo*::
+oindex:[%-oo%]
+cindex:[Sendmail compatibility,%-oo% option ignored]
+This option is ignored. In Sendmail it specifies ``old style headers'', whatever
+that means.
+
+*-oP*~<'path'>::
+oindex:[%-oP%]
+cindex:[pid (process id),of daemon]
+cindex:[daemon,process id (pid)]
+This option is useful only in conjunction with %-bd% or %-q% with a time
+value. The option specifies the file to which the process id of the daemon is
+written. When %-oX% is used with %-bd%, or when %-q% with a time is used
+without %-bd%, this is the only way of causing Exim to write a pid file,
+because in those cases, the normal pid file is not used.
+
+*-or*~<'time'>::
+oindex:[%-or%]
+cindex:[timeout,for non-SMTP input]
+This option sets a timeout value for incoming non-SMTP messages. If it is not
+set, Exim will wait forever for the standard input. The value can also be set
+by the %receive_timeout% option. The format used for specifying times is
+described in section <<SECTtimeformat>>.
+
+*-os*~<'time'>::
+oindex:[%-os%]
+cindex:[timeout,for SMTP input]
+cindex:[SMTP timeout, input]
+This option sets a timeout value for incoming SMTP messages. The timeout
+applies to each SMTP command and block of data. The value can also be set by
+the %smtp_receive_timeout% option; it defaults to 5 minutes. The format used
+for specifying times is described in section <<SECTtimeformat>>.
+
+*-ov*::
+oindex:[%-ov%]
+This option has exactly the same effect as %-v%.
+
+*-oX*~<'number~or~string'>::
+oindex:[%-oX%]
+cindex:[TCP/IP,setting listening ports]
+cindex:[TCP/IP,setting listening interfaces]
+cindex:[port,receiving TCP/IP]
+This option is relevant only when the %-bd% (start listening daemon) option is
+also given. It controls which ports and interfaces the daemon uses. Details of
+the syntax, and how it interacts with configuration file options, are given in
+chapter <<CHAPinterfaces>>. When %-oX% is used to start a daemon, no pid file is
+written unless %-oP% is also present to specify a pid file name.
+
+*-pd*::
+oindex:[%-pd%]
+cindex:[Perl,starting the interpreter]
+This option applies when an embedded Perl interpreter is linked with Exim (see
+chapter <<CHAPperl>>). It overrides the setting of the %perl_at_start% option,
+forcing the starting of the interpreter to be delayed until it is needed.
+
+*-ps*::
+oindex:[%-ps%]
+cindex:[Perl,starting the interpreter]
+This option applies when an embedded Perl interpreter is linked with Exim (see
+chapter <<CHAPperl>>). It overrides the setting of the %perl_at_start% option,
+forcing the starting of the interpreter to occur as soon as Exim is started.
+
+*-p*<'rval'>:<'sval'>::
+oindex:[%-p%]
+For compatibility with Sendmail, this option is equivalent to
+
+ -oMr <rval> -oMs <sval>
++
+It sets the incoming protocol and host name (for trusted callers). The
+host name and its colon can be omitted when only the protocol is to be set.
+Note the Exim already has two private options, %-pd% and %-ps%, that refer to
+embedded Perl. It is therefore impossible to set a protocol value of `p` or
+`s` using this option (but that does not seem a real limitation).
+
+*-q*::
+oindex:[%-q%]
+cindex:[queue runner,starting manually]
+This option is normally restricted to admin users. However, there is a
+configuration option called %prod_requires_admin% which can be set false to
+relax this restriction (and also the same requirement for the %-M%, %-R%, and
+%-S% options).
++
+The
+cindex:[queue runner,description of operation]
+%-q% option starts one queue runner process. This scans the queue of
+waiting messages, and runs a delivery process for each one in turn. It waits
+for each delivery process to finish before starting the next one. A delivery
+process may not actually do any deliveries if the retry times for the addresses
+have not been reached. Use %-qf% (see below) if you want to override this.
++
+If
+cindex:[SMTP,passed connection]
+cindex:[SMTP,multiple deliveries]
+cindex:[multiple SMTP deliveries]
+the delivery process spawns other processes to deliver other messages down
+passed SMTP connections, the queue runner waits for these to finish before
+proceeding.
++
+When all the queued messages have been considered, the original queue runner
+process terminates. In other words, a single pass is made over the waiting
+mail, one message at a time. Use %-q% with a time (see below) if you want this
+to be repeated periodically.
++
+Exim processes the waiting messages in an unpredictable order. It isn't very
+random, but it is likely to be different each time, which is all that matters.
+If one particular message screws up a remote MTA, other messages to the same
+MTA have a chance of getting through if they get tried first.
++
+It is possible to cause the messages to be processed in lexical message id
+order, which is essentially the order in which they arrived, by setting the
+%queue_run_in_order% option, but this is not recommended for normal use.
+
+*-q*<'qflags'>::
+The %-q% option may be followed by one or more flag letters that change its
+behaviour. They are all optional, but if more than one is present, they must
+appear in the correct order. Each flag is described in a separate item below.
+
+*-qq...*::
+oindex:[%-qq%]
+cindex:[queue,double scanning]
+cindex:[queue,routing]
+cindex:[routing,whole queue before delivery]
+An option starting with %-qq% requests a two-stage queue run. In the first
+stage, the queue is scanned as if the %queue_smtp_domains% option matched
+every domain. Addresses are routed, local deliveries happen, but no remote
+transports are run.
++
+The
+cindex:[hints database,remembering routing]
+hints database that remembers which messages are waiting for specific hosts is
+updated, as if delivery to those hosts had been deferred. After this is
+complete, a second, normal queue scan happens, with routing and delivery taking
+place as normal. Messages that are routed to the same host should mostly be
+delivered down a single SMTP
+cindex:[SMTP,passed connection]
+cindex:[SMTP,multiple deliveries]
+cindex:[multiple SMTP deliveries]
+connection because of the hints that were set up during the first queue scan.
+This option may be useful for hosts that are connected to the Internet
+intermittently.
+
+*-q[q]i...*::
+oindex:[%-qi%]
+cindex:[queue,initial delivery]
+If the 'i' flag is present, the queue runner runs delivery processes only for
+those messages that haven't previously been tried. ('i' stands for ``initial
+delivery''.) This can be helpful if you are putting messages on the queue using
+%-odq% and want a queue runner just to process the new messages.
+
+*-q[q][i]f...*::
+oindex:[%-qf%]
+cindex:[queue,forcing delivery]
+cindex:[delivery,forcing in queue run]
+If one 'f' flag is present, a delivery attempt is forced for each non-frozen
+message, whereas without %f% only those non-frozen addresses that have passed
+their retry times are tried.
+
+*-q[q][i]ff...*::
+oindex:[%-qff%]
+cindex:[frozen messages,forcing delivery]
+If 'ff' is present, a delivery attempt is forced for every message, whether
+frozen or not.
+
+*-q[q][i][f[f]]l*::
+oindex:[%-ql%]
+cindex:[queue,local deliveries only]
+The 'l' (the letter ``ell'') flag specifies that only local deliveries are to be
+done. If a message requires any remote deliveries, it remains on the queue for
+later delivery.
+
+*-q*<'qflags'>~<'start~id'>~<'end~id'>::
+cindex:[queue,delivering specific messages]
+When scanning the queue, Exim can be made to skip over messages whose ids are
+lexically less than a given value by following the %-q% option with a starting
+message id. For example:
+
+ exim -q 0t5C6f-0000c8-00
++
+Messages that arrived earlier than `0t5C6f-0000c8-00` are not inspected. If a
+second message id is given, messages whose ids are lexically greater than it
+are also skipped. If the same id is given twice, for example,
+
+ exim -q 0t5C6f-0000c8-00 0t5C6f-0000c8-00
++
+just one delivery process is started, for that message. This differs from %-M%
+in that retry data is respected, and it also differs from %-Mc% in that it
+counts as a delivery from a queue run. Note that the selection mechanism does
+not affect the order in which the messages are scanned. There are also other
+ways of selecting specific sets of messages for delivery in a queue run -- see
+%-R% and %-S%.
+
+*-q*<'qflags'><'time'>::
+cindex:[queue runner,starting periodically]
+cindex:[periodic queue running]
+When a time value is present, the %-q% option causes Exim to run as a daemon,
+starting a queue runner process at intervals specified by the given time value
+(whose format is described in section <<SECTtimeformat>>). This form of the %-q%
+option is commonly combined with the %-bd% option, in which case a single
+daemon process handles both functions. A common way of starting up a combined
+daemon at system boot time is to use a command such as
+
+ /usr/exim/bin/exim -bd -q30m
++
+Such a daemon listens for incoming SMTP calls, and also starts a queue runner
+process every 30 minutes.
++
+When a daemon is started by %-q% with a time value, but without %-bd%, no pid
+file is written unless one is explicitly requested by the %-oP% option.
+
+*-qR*<'rsflags'>~<'string'>::
+oindex:[%-qR%]
+This option is synonymous with %-R%. It is provided for Sendmail compatibility.
+
+*-qS*<'rsflags'>~<'string'>::
+oindex:[%-qS%]
+This option is synonymous with %-S%.
+
+*-R*<'rsflags'>~<'string'>::
+oindex:[%-R%]
+cindex:[queue runner,for specific recipients]
+cindex:[delivery,to given domain]
+cindex:[domain,delivery to]
+The <'rsflags'> may be empty, in which case the white space before the string
+is optional, unless the string is 'f', 'ff', 'r', 'rf', or 'rff', which are the
+possible values for <'rsflags'>. White space is required if <'rsflags'> is not
+empty.
++
+This option is similar to %-q% with no time value, that is, it causes Exim to
+perform a single queue run, except that, when scanning the messages on the
+queue, Exim processes only those that have at least one undelivered recipient
+address containing the given string, which is checked in a case-independent
+way. If the <'rsflags'> start with 'r', <'string'> is interpreted as a regular
+expression; otherwise it is a literal string.
++
+Once a message is selected, all its addresses are processed. For the first
+selected message, Exim overrides any retry information and forces a delivery
+attempt for each undelivered address. This means that if delivery of any
+address in the first message is successful, any existing retry information is
+deleted, and so delivery attempts for that address in subsequently selected
+messages (which are processed without forcing) will run. However, if delivery
+of any address does not succeed, the retry information is updated, and in
+subsequently selected messages, the failing address will be skipped.
++
+If the <'rsflags'> contain 'f' or 'ff', the delivery forcing applies to all
+selected messages, not just the first;
+cindex:[frozen messages,forcing delivery]
+frozen messages are included when 'ff' is present.
++
+The %-R% option makes it straightforward to initiate delivery of all messages
+to a given domain after a host has been down for some time. When the SMTP
+command ETRN is accepted by its ACL (see chapter <<CHAPACL>>), its default
+effect is to run Exim with the %-R% option, but it can be configured to run an
+arbitrary command instead.
+
+*-r*::
+oindex:[%-r%]
+This is a documented (for Sendmail) obsolete alternative name for %-f%.
+
+*-S*<'rsflags'>~<'string'>::
+oindex:[%-S%]
+cindex:[delivery,from given sender]
+cindex:[queue runner,for specific senders]
+This option acts like %-R% except that it checks the string against each
+message's sender instead of against the recipients. If %-R% is also set, both
+conditions must be met for a message to be selected. If either of the options
+has 'f' or 'ff' in its flags, the associated action is taken.
+
+*-Tqt*~<'times'>::
+oindex:[%-Tqt%]
+This an option that is exclusively for use by the Exim testing suite. It is not
+recognized when Exim is run normally. It allows for the setting up of explicit
+``queue times'' so that various warning/retry features can be tested.
+
+*-t*::
+oindex:[%-t%]
+cindex:[recipient,extracting from header lines]
+cindex:['Bcc:' header line]
+cindex:['Cc:' header line]
+cindex:['To:' header line]
+When Exim is receiving a locally-generated, non-SMTP message on its standard
+input, the %-t% option causes the recipients of the message to be obtained
+from the 'To:', 'Cc:', and 'Bcc:' header lines in the message instead of from
+the command arguments. The addresses are extracted before any rewriting takes
+place.
++
+If
+cindex:[Sendmail compatibility,%-t% option]
+the command has any arguments, they specify addresses to which the message
+is 'not' to be delivered. That is, the argument addresses are removed from
+the recipients list obtained from the headers. This is compatible with Smail 3
+and in accordance with the documented behaviour of several versions of
+Sendmail, as described in man pages on a number of operating systems (e.g.
+Solaris 8, IRIX 6.5, HP-UX 11). However, some versions of Sendmail 'add'
+argument addresses to those obtained from the headers, and the O'Reilly
+Sendmail book documents it that way. Exim can be made to add argument addresses
+instead of subtracting them by setting the option
+%extract_addresses_remove_arguments% false.
++
+If a 'Bcc:' header line is present, it is removed from the message unless
+there is no 'To:' or 'Cc:', in which case a 'Bcc:' line with no data is
+created. This is necessary for conformity with the original RFC 822 standard;
+the requirement has been removed in RFC 2822, but that is still very new.
++
+If
+cindex:[%Resent-% header lines,with %-t%]
+there are any %Resent-% header lines in the message, Exim extracts
+recipients from all 'Resent-To:', 'Resent-Cc:', and 'Resent-Bcc:' header
+lines instead of from 'To:', 'Cc:', and 'Bcc:'. This is for compatibility
+with Sendmail and other MTAs. (Prior to release 4.20, Exim gave an error if
+%-t% was used in conjunction with %Resent-% header lines.)
++
+RFC 2822 talks about different sets of %Resent-% header lines (for when a
+message is resent several times). The RFC also specifies that they should be
+added at the front of the message, and separated by 'Received:' lines. It is
+not at all clear how %-t% should operate in the present of multiple sets,
+nor indeed exactly what constitutes a ``set''.
+In practice, it seems that MUAs do not follow the RFC. The %Resent-% lines are
+often added at the end of the header, and if a message is resent more than
+once, it is common for the original set of %Resent-% headers to be renamed as
+%X-Resent-% when a new set is added. This removes any possible ambiguity.
+
+*-ti*::
+oindex:[%-ti%]
+This option is exactly equivalent to %-t% %-i%. It is provided for
+compatibility with Sendmail.
+
+*-tls-on-connect*::
+oindex:[%-tls-on-connect%]
+cindex:[TLS,use without STARTTLS]
+cindex:[TLS,automatic start]
+This option is available when Exim is compiled with TLS support. It forces all
+incoming SMTP connections to behave as if the incoming port is listed in the
+%tls_on_connect_ports% option. See section <<SECTsupobssmt>> and chapter
+<<CHAPTLS>> for further details.
+
+
+*-U*::
+oindex:[%-U%]
+cindex:[Sendmail compatibility,%-U% option ignored]
+Sendmail uses this option for ``initial message submission'', and its
+documentation states that in future releases, it may complain about
+syntactically invalid messages rather than fixing them when this flag is not
+set. Exim ignores this option.
+
+*-v*::
+oindex:[%-v%]
+This option causes Exim to write information to the standard error stream,
+describing what it is doing. In particular, it shows the log lines for
+receiving and delivering a message, and if an SMTP connection is made, the SMTP
+dialogue is shown. Some of the log lines shown may not actually be written to
+the log if the setting of %log_selector% discards them. Any relevant selectors
+are shown with each log line. If none are shown, the logging is unconditional.
+
+*-x*::
+oindex:[%-x%]
+AIX uses %-x% for a private purpose (``mail from a local mail program has
+National Language Support extended characters in the body of the mail item'').
+It sets %-x% when calling the MTA from its %mail% command. Exim ignores this
+option.
+
+///
+We insert a stylized DocBook comment here, to identify the end of the command
+line options. This is for the benefit of the Perl script that automatically
+creates a man page for the options.
+///
+
+++++
+<!-- === End of command line options === -->
+++++
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+
+[[CHAPconf]]
+[titleabbrev="The runtime configuration file"]
+The Exim run time configuration file
+------------------------------------
+
+cindex:[run time configuration]
+cindex:[configuration file,general description]
+cindex:[CONFIGURE_FILE]
+cindex:[configuration file,errors in]
+cindex:[error,in configuration file]
+cindex:[return code,for bad configuration]
+Exim uses a single run time configuration file that is read whenever an Exim
+binary is executed. Note that in normal operation, this happens frequently,
+because Exim is designed to operate in a distributed manner, without central
+control.
+
+If a syntax error is detected while reading the configuration file, Exim
+writes a message on the standard error, and exits with a non-zero return code.
+The message is also written to the panic log. *Note*: only simple syntax
+errors can be detected at this time. The values of any expanded options are
+not checked until the expansion happens, even when the expansion does not
+actually alter the string.
+
+
+
+The name of the configuration file is compiled into the binary for security
+reasons, and is specified by the CONFIGURE_FILE compilation option. In
+most configurations, this specifies a single file. However, it is permitted to
+give a colon-separated list of file names, in which case Exim uses the first
+existing file in the list.
+
+cindex:[EXIM_USER]
+cindex:[EXIM_GROUP]
+cindex:[CONFIGURE_OWNER]
+cindex:[CONFIGURE_GROUP]
+cindex:[configuration file,ownership]
+cindex:[ownership,configuration file]
+The run time configuration file must be owned by root or by the user that is
+specified at compile time by the EXIM_USER option, or by the user that is
+specified at compile time by the CONFIGURE_OWNER option (if set). The
+configuration file must not be world-writeable or group-writeable, unless its
+group is the one specified at compile time by the EXIM_GROUP option
+
+or by the CONFIGURE_GROUP option.
+
+
+*Warning*: In a conventional configuration, where the Exim binary is setuid
+to root, anybody who is able to edit the run time configuration file has an
+easy way to run commands as root. If you make your mail administrators members
+of the Exim group, but do not trust them with root, make sure that the run time
+configuration is not group writeable.
+
+A default configuration file, which will work correctly in simple situations,
+is provided in the file _src/configure.default_. If CONFIGURE_FILE
+defines just one file name, the installation process copies the default
+configuration to a new file of that name if it did not previously exist. If
+CONFIGURE_FILE is a list, no default is automatically installed. Chapter
+<<CHAPdefconfil>> is a ``walk-through'' discussion of the default configuration.
+
+
+
+Using a different configuration file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[configuration file,alternate]
+A one-off alternate configuration can be specified by the %-C% command line
+option, which may specify a single file or a list of files. However, when %-C%
+is used, Exim gives up its root privilege, unless called by root or the Exim
+user (or unless the argument for %-C% is identical to the built-in value from
+CONFIGURE_FILE). %-C% is useful mainly for checking the syntax of
+configuration files before installing them. No owner or group checks are done
+on a configuration file specified by %-C%.
+
+The privileged use of %-C% by the Exim user can be locked out by setting
+ALT_CONFIG_ROOT_ONLY in _Local/Makefile_ when building Exim. However,
+if you do this, you also lock out the possibility of testing a
+configuration using %-C% right through message reception and delivery, even if
+the caller is root. The reception works, but by that time, Exim is running as
+the Exim user, so when it re-execs to regain privilege for the delivery, the
+use of %-C% causes privilege to be lost. However, root can test reception and
+delivery using two separate commands (one to put a message on the queue, using
+%-odq%, and another to do the delivery, using %-M%).
+
+If ALT_CONFIG_PREFIX is defined _in Local/Makefile_, it specifies a
+prefix string with which any file named in a %-C% command line option must
+start. In addition, the file name must not contain the sequence `/../`. There
+is no default setting for ALT_CONFIG_PREFIX; when it is unset, any file
+name can be used with %-C%.
+
+One-off changes to a configuration can be specified by the %-D% command line
+option, which defines and overrides values for macros used inside the
+configuration file. However, like %-C%, the use of this option by a
+non-privileged user causes Exim to discard its root privilege.
+If DISABLE_D_OPTION is defined in _Local/Makefile_, the use of %-D% is
+completely disabled, and its use causes an immediate error exit.
+
+Some sites may wish to use the same Exim binary on different machines that
+share a file system, but to use different configuration files on each machine.
+If CONFIGURE_FILE_USE_NODE is defined in _Local/Makefile_, Exim first
+looks for a file whose name is the configuration file name followed by a dot
+and the machine's node name, as obtained from the 'uname()' function. If this
+file does not exist, the standard name is tried. This processing occurs for
+each file name in the list given by CONFIGURE_FILE or %-C%.
+
+In some esoteric situations different versions of Exim may be run under
+different effective uids and the CONFIGURE_FILE_USE_EUID is defined to
+help with this. See the comments in _src/EDITME_ for details.
+
+
+
+[[SECTconffilfor]]
+Configuration file format
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[configuration file,format of]
+cindex:[format,configuration file]
+Exim's configuration file is divided into a number of different parts. General
+option settings must always appear at the start of the file. The other parts
+are all optional, and may appear in any order. Each part other than the first
+is introduced by the word ``begin'' followed by the name of the part. The
+optional parts are:
+
+- 'ACL': Access control lists for controlling incoming SMTP mail.
+
+- cindex:[AUTH,configuration]
+'authenticators': Configuration settings for the authenticator drivers. These
+are concerned with the SMTP AUTH command (see chapter <<CHAPSMTPAUTH>>).
+
+- 'routers': Configuration settings for the router drivers. Routers process
+addresses and determine how the message is to be delivered.
+
+- 'transports': Configuration settings for the transport drivers. Transports
+define mechanisms for copying messages to destinations.
+
+- 'retry': Retry rules, for use when a message cannot be immediately delivered.
+
+- 'rewrite': Global address rewriting rules, for use when a message arrives and
+when new addresses are generated during delivery.
+
+- 'local_scan': Private options for the 'local_scan()' function. If you
+want to use this feature, you must set
+
+ LOCAL_SCAN_HAS_OPTIONS=yes
++
+in _Local/Makefile_ before building Exim. Full details of the
+'local_scan()' facility are given in chapter <<CHAPlocalscan>>.
+
+cindex:[configuration file,leading whitespace in]
+cindex:[configuration file,trailing whitespace in]
+cindex:[whitespace,in configuration file]
+Leading and trailing whitespace in configuration lines is always ignored.
+
+Blank lines in the file, and lines starting with a # character (ignoring
+leading white space) are treated as comments and are ignored. *Note*: a
+# character other than at the beginning of a line is not treated specially,
+and does not introduce a comment.
+
+Any non-comment line can be continued by ending it with a backslash. Note that
+the general rule for whitespace means that trailing white space after the
+backslash is ignored, and leading white space at the start of continuation
+lines is also ignored. Comment lines beginning with # (but not empty lines) may
+appear in the middle of a sequence of continuation lines.
+
+A convenient way to create a configuration file is to start from the
+default, which is supplied in _src/configure.default_, and add, delete, or
+change settings as required.
+
+The ACLs, retry rules, and rewriting rules have their own syntax which is
+described in chapters <<CHAPACL>>, <<CHAPretry>>, and <<CHAPrewrite>>,
+respectively. The other parts of the configuration file have some syntactic
+items in common, and these are described below, from section <<SECTcos>>
+onwards. Before that, the inclusion, macro, and conditional facilities are
+described.
+
+
+
+File inclusions in the configuration file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[inclusions in configuration file]
+cindex:[configuration file,including other files]
+cindex:[.include in configuration file]
+cindex:[.include_if_exists in configuration file]
+You can include other files inside Exim's run time configuration file by
+using this syntax:
+
+ .include <file name>
+
+or
+
+ .include_if_exists <file name>
+
+on a line by itself. Double quotes round the file name are optional. If you use
+the first form, a configuration error occurs if the file does not exist; the
+second form does nothing for non-existent files.
+
+Includes may be nested to any depth, but remember that Exim reads its
+configuration file often, so it is a good idea to keep them to a minimum.
+If you change the contents of an included file, you must HUP the daemon,
+because an included file is read only when the configuration itself is read.
+
+The processing of inclusions happens early, at a physical line level, so, like
+comment lines, an inclusion can be used in the middle of an option setting,
+for example:
+
+....
+hosts_lookup = a.b.c \
+ .include /some/file
+....
+
+Include processing happens after macro processing (see below). Its effect is to
+process the lines of the file as if they occurred inline where the inclusion
+appears.
+
+
+
+[[SECTmacrodefs]]
+Macros in the configuration file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[macro,description of]
+cindex:[configuration file,macros]
+If a line in the main part of the configuration (that is, before the first
+``begin'' line) begins with an upper case letter, it is taken as a macro
+definition, and must be of the form
+
+&&&
+<'name'> = <'rest of line'>
+&&&
+
+The name must consist of letters, digits, and underscores, and need not all be
+in upper case, though that is recommended. The rest of the line, including any
+continuations, is the replacement text, and has leading and trailing white
+space removed. Quotes are not removed. The replacement text can never end with
+a backslash character, but this doesn't seem to be a serious limitation.
+
+Once a macro is defined, all subsequent lines in the file (and any included
+files) are scanned for the macro name; if there are several macros, the line is
+scanned for each in turn, in the order in which they are defined. The
+replacement text is not re-scanned for the current macro, though it is scanned
+for subsequently defined macros. For this reason, a macro name may not contain
+the name of a previously defined macro as a substring. You could, for example,
+define
+
+&&&
+`ABCD_XYZ = `<'something'>
+`ABCD = `<'something else'>
+&&&
+
+but putting the definitions in the opposite order would provoke a configuration
+error.
+
+Macro expansion is applied to individual lines from the file, before checking
+for line continuation or file inclusion (see below). If a line consists solely
+of a macro name, and the expansion of the macro is empty, the line is ignored.
+A macro at the start of a line may turn the line into a comment line or a
+`.include` line.
+
+As an example of macro usage, consider a configuration where aliases are looked
+up in a MySQL database. It helps to keep the file less cluttered if long
+strings such as SQL statements are defined separately as macros, for example:
+
+....
+ALIAS_QUERY = select mailbox from user where \
+ login=${quote_mysql:$local_part};
+....
+
+This can then be used in a ^redirect^ router setting like this:
+
+ data = ${lookup mysql{ALIAS_QUERY}}
+
+In earlier versions of Exim macros were sometimes used for domain, host, or
+address lists. In Exim 4 these are handled better by named lists -- see section
+<<SECTnamedlists>>.
+
+Macros in the configuration file can be overridden by the %-D% command line
+option, but Exim gives up its root privilege when %-D% is used, unless called
+by root or the Exim user.
+
+
+
+Conditional skips in the configuration file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[configuration file,conditional skips]
+cindex:[.ifdef]
+You can use the directives `.ifdef`, `.ifndef`, `.elifdef`,
+`.elifndef`, `.else`, and `.endif` to dynamically include or exclude
+portions of the configuration file. The processing happens whenever the file is
+read (that is, when an Exim binary starts to run).
+
+The implementation is very simple. Instances of the first four directives must
+be followed by text that includes the names of one or macros. The condition
+that is tested is whether or not any macro substitution has taken place in the
+line. Thus:
+
+ .ifdef AAA
+ message_size_limit = 50M
+ .else
+ message_size_limit = 100M
+ .endif
+
+sets a message size limit of 50M if the macro `AAA` is defined, and 100M
+otherwise. If there is more than one macro named on the line, the condition
+is true if any of them are defined. That is, it is an ``or'' condition. To
+obtain an ``and'' condition, you need to use nested `.ifdef`##s.
+
+Although you can use a macro expansion to generate one of these directives,
+it is not very useful, because the condition ``there was a macro substitution
+in this line'' will always be true.
+
+Text following `.else` and `.endif` is ignored, and can be used as comment
+to clarify complicated nestings.
+
+
+
+[[SECTcos]]
+Common option syntax
+~~~~~~~~~~~~~~~~~~~~
+cindex:[common option syntax]
+cindex:[syntax of common options]
+cindex:[configuration file,common option syntax]
+For the main set of options, driver options, and 'local_scan()' options,
+each setting is on a line by itself, and starts with a name consisting of
+lower-case letters and underscores. Many options require a data value, and in
+these cases the name must be followed by an equals sign (with optional white
+space) and then the value. For example:
+
+ qualify_domain = mydomain.example.com
+
+Some option settings may contain sensitive data, for example, passwords for
+accessing databases. To stop non-admin users from using the %-bP% command line
+option to read these values, you can precede the option settings with the word
+``hide''. For example:
+
+ hide mysql_servers = localhost/users/admin/secret-password
+
+For non-admin users, such options are displayed like this:
+
+ mysql_servers = <value not displayable>
+
+If ``hide'' is used on a driver option, it hides the value of that option on all
+instances of the same driver.
+
+The following sections describe the syntax used for the different data types
+that are found in option settings.
+
+
+Boolean options
+~~~~~~~~~~~~~~~
+cindex:[format,boolean]
+cindex:[boolean configuration values]
+Options whose type is given as boolean are on/off switches. There are two
+different ways of specifying such options: with and without a data value. If
+the option name is specified on its own without data, the switch is turned on;
+if it is preceded by ``no_'' or ``not_'' the switch is turned off. However,
+boolean options may optionally be followed by an equals sign and one of the
+words ``true'', ``false'', ``yes'', or ``no'', as an alternative syntax. For example,
+the following two settings have exactly the same effect:
+
+ queue_only
+ queue_only = true
+
+The following two lines also have the same (opposite) effect:
+
+ no_queue_only
+ queue_only = false
+
+You can use whichever syntax you prefer.
+
+
+
+
+Integer values
+~~~~~~~~~~~~~~
+cindex:[integer configuration values]
+cindex:[format,integer]
+If an integer data item starts with the characters ``0x'', the remainder of it
+is interpreted as a hexadecimal number. Otherwise, it is treated as octal if it
+starts with the digit 0, and decimal if not. If an integer value is followed by
+the letter K, it is multiplied by 1024; if it is followed by the letter M, it
+is multiplied by 1024x1024.
+
+When the values of integer option settings are output, values which are an
+exact multiple of 1024 or 1024x1024 are
+sometimes, but not always,
+printed using the letters K and M. The printing style is independent of the
+actual input format that was used.
+
+
+Octal integer values
+~~~~~~~~~~~~~~~~~~~~
+cindex:[integer format]
+cindex:[format,octal integer]
+The value of an option specified as an octal integer is always interpreted in
+octal, whether or not it starts with the digit zero. Such options are always
+output in octal.
+
+
+
+Fixed point number values
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[fixed point configuration values]
+cindex:[format,fixed point]
+A fixed point number consists of a decimal integer, optionally followed by a
+decimal point and up to three further digits.
+
+
+
+[[SECTtimeformat]]
+Time interval values
+~~~~~~~~~~~~~~~~~~~~
+cindex:[time interval,specifying in configuration]
+cindex:[format,time interval]
+A time interval is specified as a sequence of numbers, each followed by one of
+the following letters, with no intervening white space:
+
+[frame="none"]
+`-`-----`--------
+ %s% seconds
+ %m% minutes
+ %h% hours
+ %d% days
+ %w% weeks
+-----------------
+
+For example, ``3h50m'' specifies 3 hours and 50 minutes. The values of time
+intervals are output in the same format. Exim does not restrict the values; it
+is perfectly acceptable, for example, to specify ``90m'' instead of ``1h30m''.
+
+
+
+[[SECTstrings]]
+String values
+~~~~~~~~~~~~~
+cindex:[string,format of configuration values]
+cindex:[format,string]
+If a string data item does not start with a double-quote character, it is taken
+as consisting of the remainder of the line plus any continuation lines,
+starting at the first character after any leading white space, with trailing
+white space characters removed, and with no interpretation of the characters in
+the string. Because Exim removes comment lines (those beginning with #) at an
+early stage, they can appear in the middle of a multi-line string. The
+following settings are therefore equivalent:
+
+....
+trusted_users = uucp:mail
+
+trusted_users = uucp:\
+ # This comment line is ignored
+ mail
+....
+
+cindex:[string,quoted]
+cindex:[escape characters in quoted strings]
+If a string does start with a double-quote, it must end with a closing
+double-quote, and any backslash characters other than those used for line
+continuation are interpreted as escape characters, as follows:
+
+[frame="none"]
+`-`----------------------`--------------------------------------------------
+ `\\` single backslash
+ `\n` newline
+ `\r` carriage return
+ `\t` tab
+ `\`<'octal digits'> up to 3 octal digits specify one character
+ `\x`<'hex digits'> up to 2 hexadecimal digits specify one character
+----------------------------------------------------------------------------
+
+If a backslash is followed by some other character, including a double-quote
+character, that character replaces the pair.
+
+Quoting is necessary only if you want to make use of the backslash escapes to
+insert special characters, or if you need to specify a value with leading or
+trailing spaces. These cases are rare, so quoting is almost never needed in
+current versions of Exim. In versions of Exim before 3.14, quoting was required
+in order to continue lines, so you may come across older configuration files
+and examples that apparently quote unnecessarily.
+
+
+Expanded strings
+~~~~~~~~~~~~~~~~
+cindex:[string expansion, definition of]
+cindex:[expansion,definition of]
+Some strings in the configuration file are subjected to 'string expansion',
+by which means various parts of the string may be changed according to the
+circumstances (see chapter <<CHAPexpand>>). The input syntax for such strings is
+as just described; in particular, the handling of backslashes in quoted strings
+is done as part of the input process, before expansion takes place. However,
+backslash is also an escape character for the expander, so any backslashes that
+are required for that reason must be doubled if they are within a quoted
+configuration string.
+
+
+User and group names
+~~~~~~~~~~~~~~~~~~~~
+cindex:[user name,format of]
+cindex:[format,user name]
+cindex:[group,name format]
+cindex:[format,group name]
+User and group names are specified as strings, using the syntax described
+above, but the strings are interpreted specially. A user or group name must
+either consist entirely of digits, or be a name that can be looked up using the
+'getpwnam()' or 'getgrnam()' function, as appropriate.
+
+
+[[SECTlistconstruct]]
+List construction
+~~~~~~~~~~~~~~~~~
+cindex:[list,syntax of in configuration]
+cindex:[format,list item in configuration]
+cindex:[string list, definition]
+The data for some configuration options is a list of items, with colon as the
+default separator. Many of these options are shown with type ``string list'' in
+the descriptions later in this document. Others are listed as ``domain list'',
+``host list'', ``address list'', or ``local part list''. Syntactically, they are all
+the same; however, those other than ``string list'' are subject to particular
+kinds of interpretation, as described in chapter <<CHAPdomhosaddlists>>.
+
+In all these cases, the entire list is treated as a single string as far as the
+input syntax is concerned. The %trusted_users% setting in section
+<<SECTstrings>> above is an example. If a colon is actually needed in an item in
+a list, it must be entered as two colons. Leading and trailing white space on
+each item in a list is ignored. This makes it possible to include items that
+start with a colon, and in particular, certain forms of IPv6 address. For
+example, the list
+
+ local_interfaces = 127.0.0.1 : ::::1
+
++contains two IP addresses, the IPv4 address 127.0.0.1 and the IPv6 address
+1.
+
+cindex:[list separator, changing]
+cindex:[IPv6,addresses in lists]
+Doubling colons in IPv6 addresses is an unwelcome chore, so a mechanism was
+introduced to allow the separator character to be changed. If a list begins
+with a left angle bracket, followed by any punctuation character, that
+character is used instead of colon as the list separator. For example, the list
+above can be rewritten to use a semicolon separator like this:
+
+ local_interfaces = <; 127.0.0.1 ; ::1
+
+This facility applies to all lists, with the exception of the list in
+%log_file_path%. It is recommended that the use of non-colon separators be
+confined to circumstances where they really are needed.
+
+
+
+[[SECTempitelis]]
+Empty items in lists
+~~~~~~~~~~~~~~~~~~~~
+cindex:[list,empty item in]
+An empty item at the end of a list is always ignored. In other words, trailing
+separator characters are ignored. Thus, the list in
+
+ senders = user@domain :
+
+contains only a single item. If you want to include an empty string as one item
+in a list, it must not be the last item. For example, this list contains three
+items, the second of which is empty:
+
+ senders = user1@domain : : user2@domain
+
+*Note*: there must be whitespace between the two colons, as otherwise they
+are interpreted as representing a single colon data character (and the list
+would then contain just one item). If you want to specify a list that contains
+just one, empty item, you can do it as in this example:
+
+ senders = :
+
+In this case, the first item is empty, and the second is discarded because it
+is at the end of the list.
+
+
+
+
+[[SECTfordricon]]
+Format of driver configurations
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[drivers,configuration format]
+There are separate parts in the configuration for defining routers, transports,
+and authenticators. In each part, you are defining a number of driver
+instances, each with its own set of options. Each driver instance is defined by
+a sequence of lines like this:
+
+&&&
+<'instance name'>:
+ <'option'>
+ ...
+ <'option'>
+&&&
+
+In the following example, the instance name is ^localuser^, and it is
+followed by three options settings:
+
+ localuser:
+ driver = accept
+ check_local_user
+ transport = local_delivery
+
+For each driver instance, you specify which Exim code module it uses -- by the
+setting of the %driver% option -- and (optionally) some configuration settings.
+For example, in the case of transports, if you want a transport to deliver with
+SMTP you would use the ^smtp^ driver; if you want to deliver to a local file
+you would use the ^appendfile^ driver. Each of the drivers is described in
+detail in its own separate chapter later in this manual.
+
+You can have several routers, transports, or authenticators that are based on
+the same underlying driver (each must have a different name).
+
+The order in which routers are defined is important, because addresses are
+passed to individual routers one by one, in order. The order in which
+transports are defined does not matter at all. The order in which
+authenticators are defined is used only when Exim, as a client, is searching
+them to find one that matches an authentication mechanism offered by the
+server.
+
+cindex:[generic options]
+cindex:[options, generic -- definition of]
+Within a driver instance definition, there are two kinds of option:
+'generic' and 'private'. The generic options are those that apply to all
+drivers of the same type (that is, all routers, all transports or all
+authenticators).
+The %driver% option is a generic option that must appear in every definition.
+
+cindex:[private options]
+The private options are special for each driver, and none need appear, because
+they all have default values.
+
+The options may appear in any order, except that the %driver% option must
+precede any private options, since these depend on the particular driver. For
+this reason, it is recommended that %driver% always be the first option.
+
+Driver instance names, which are used for reference in log entries and
+elsewhere, can be any sequence of letters, digits, and underscores (starting
+with a letter) and must be unique among drivers of the same type. A router and
+a transport (for example) can each have the same name, but no two router
+instances can have the same name. The name of a driver instance should not be
+confused with the name of the underlying driver module. For example, the
+configuration lines:
+
+ remote_smtp:
+ driver = smtp
+
+create an instance of the ^smtp^ transport driver whose name is
+^remote_smtp^. The same driver code can be used more than once, with
+different instance names and different option settings each time. A second
+instance of the ^smtp^ transport, with different options, might be defined
+thus:
+
+ special_smtp:
+ driver = smtp
+ port = 1234
+ command_timeout = 10s
+
+The names ^remote_smtp^ and ^special_smtp^ would be used to reference
+these transport instances from routers, and these names would appear in log
+lines.
+
+Comment lines may be present in the middle of driver specifications. The full
+list of option settings for any particular driver instance, including all the
+defaulted values, can be extracted by making use of the %-bP% command line
+option.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPdefconfil]]
+The default configuration file
+------------------------------
+cindex:[configuration file,default ``walk through'']
+cindex:[default,configuration file ``walk through'']
+The default configuration file supplied with Exim as _src/configure.default_
+is sufficient for a host with simple mail requirements. As an introduction to
+the way Exim is configured, this chapter ``walks through'' the default
+configuration, giving brief explanations of the settings. Detailed descriptions
+of the options are given in subsequent chapters. The default configuration file
+itself contains extensive comments about ways you might want to modify the
+initial settings. However, note that there are many options that are not
+mentioned at all in the default configuration.
+
+
+
+Main configuration settings
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The main (global) configuration option settings must always come first in the
+file. The first thing you'll see in the file, after some initial comments, is
+the line
+
+ # primary_hostname =
+
+This is a commented-out setting of the %primary_hostname% option. Exim needs
+to know the official, fully qualified name of your host, and this is where you
+can specify it. However, in most cases you do not need to set this option. When
+it is unset, Exim uses the 'uname()' system function to obtain the host name.
+
+The first three non-comment configuration lines are as follows:
+
+ domainlist local_domains = @
+ domainlist relay_to_domains =
+ hostlist relay_from_hosts = 127.0.0.1
+
+These are not, in fact, option settings. They are definitions of two named
+domain lists and one named host list. Exim allows you to give names to lists of
+domains, hosts, and email addresses, in order to make it easier to manage the
+configuration file (see section <<SECTnamedlists>>).
+
+The first line defines a domain list called 'local_domains'; this is used
+later in the configuration to identify domains that are to be delivered
+on the local host.
+
+cindex:[@ in a domain list]
+There is just one item in this list, the string ``@''. This is a special form of
+entry which means ``the name of the local host''. Thus, if the local host is
+called 'a.host.example', mail to 'any.user@a.host.example' is expected to
+be delivered locally. Because the local host's name is referenced indirectly,
+the same configuration file can be used on different hosts.
+
+The second line defines a domain list called 'relay_to_domains', but the
+list itself is empty. Later in the configuration we will come to the part that
+controls mail relaying through the local host; it allows relaying to any
+domains in this list. By default, therefore, no relaying on the basis of a mail
+domain is permitted.
+
+The third line defines a host list called 'relay_from_hosts'. This list is
+used later in the configuration to permit relaying from any host or IP address
+that matches the list. The default contains just the IP address of the IPv4
+loopback interface, which means that processes on the local host are able to
+submit mail for relaying by sending it over TCP/IP to that interface. No other
+hosts are permitted to submit messages for relaying.
+
+Just to be sure there's no misunderstanding: at this point in the configuration
+we aren't actually setting up any controls. We are just defining some domains
+and hosts that will be used in the controls that are specified later.
+
+The next configuration line is a genuine option setting:
+
+ acl_smtp_rcpt = acl_check_rcpt
+
+This option specifies an 'Access Control List' (ACL) which is to be used
+during an incoming SMTP session for every recipient of a message (every
+RCPT command). The name of the list is 'acl_check_rcpt', and we will
+come to its definition below, in the ACL section of the configuration. ACLs
+control which recipients are accepted for an incoming message -- if a
+configuration does not provide an ACL to check recipients, no SMTP mail can be
+accepted.
+
+Two commented-out options settings are next:
+
+ # qualify_domain =
+ # qualify_recipient =
+
+The first of these specifies a domain that Exim uses when it constructs a
+complete email address from a local login name. This is often needed when Exim
+receives a message from a local process. If you do not set %qualify_domain%,
+the value of %primary_hostname% is used. If you set both of these options, you
+can have different qualification domains for sender and recipient addresses. If
+you set only the first one, its value is used in both cases.
+
+cindex:[domain literal,recognizing format]
+The following line must be uncommented if you want Exim to recognize
+addresses of the form 'user@[10.11.12.13]' that is, with a ``domain literal''
+(an IP address) instead of a named domain.
+
+ # allow_domain_literals
+
+The RFCs still require this form, but many people think that in the modern
+Internet it makes little sense to permit mail to be sent to specific hosts by
+quoting their IP addresses. This ancient format has been used by people who
+try to abuse hosts by using them for unwanted relaying. However, some
+people believe there are circumstances (for example, messages addressed to
+'postmaster') where domain literals are still useful.
+
+The next configuration line is a kind of trigger guard:
+
+ never_users = root
+
+It specifies that no delivery must ever be run as the root user. The normal
+convention is to set up 'root' as an alias for the system administrator. This
+setting is a guard against slips in the configuration.
+The list of users specified by %never_users% is not, however, the complete
+list; the build-time configuration in _Local/Makefile_ has an option called
+FIXED_NEVER_USERS specifying a list that cannot be overridden. The
+contents of %never_users% are added to this list. By default
+FIXED_NEVER_USERS also specifies root.
+
+When a remote host connects to Exim in order to send mail, the only information
+Exim has about the host's identity is its IP address. The next configuration
+line,
+
+ host_lookup = *
+
+specifies that Exim should do a reverse DNS lookup on all incoming connections,
+in order to get a host name. This improves the quality of the logging
+information, but if you feel it is too expensive, you can remove it entirely,
+or restrict the lookup to hosts on ``nearby'' networks.
+Note that it is not always possible to find a host name from an IP address,
+because not all DNS reverse zones are maintained, and sometimes DNS servers are
+unreachable.
+
+The next two lines are concerned with 'ident' callbacks, as defined by RFC
+1413 (hence their names):
+
+ rfc1413_hosts = *
+ rfc1413_query_timeout = 30s
+
+These settings cause Exim to make ident callbacks for all incoming SMTP calls.
+You can limit the hosts to which these calls are made, or change the timeout
+that is used. If you set the timeout to zero, all ident calls are disabled.
+Although they are cheap and can provide useful information for tracing problem
+messages, some hosts and firewalls have problems with ident calls. This can
+result in a timeout instead of an immediate refused connection, leading to
+delays on starting up an incoming SMTP session.
+
+When Exim receives messages over SMTP connections, it expects all addresses to
+be fully qualified with a domain, as required by the SMTP definition. However,
+if you are running a server to which simple clients submit messages, you may
+find that they send unqualified addresses. The two commented-out options:
+
+ # sender_unqualified_hosts =
+ # recipient_unqualified_hosts =
+
+show how you can specify hosts that are permitted to send unqualified sender
+and recipient addresses, respectively.
+
+The %percent_hack_domains% option is also commented out:
+
+ # percent_hack_domains =
+
+It provides a list of domains for which the ``percent hack'' is to operate. This
+is an almost obsolete form of explicit email routing. If you do not know
+anything about it, you can safely ignore this topic.
+
+The last two settings in the main part of the default configuration are
+concerned with messages that have been ``frozen'' on Exim's queue. When a message
+is frozen, Exim no longer continues to try to deliver it. Freezing occurs when
+a bounce message encounters a permanent failure because the sender address of
+the original message that caused the bounce is invalid, so the bounce cannot be
+delivered. This is probably the most common case, but there are also other
+conditions that cause freezing, and frozen messages are not always bounce
+messages.
+
+ ignore_bounce_errors_after = 2d
+ timeout_frozen_after = 7d
+
+The first of these options specifies that failing bounce messages are to be
+discarded after 2 days on the queue. The second specifies that any frozen
+message (whether a bounce message or not) is to be timed out (and discarded)
+after a week. In this configuration, the first setting ensures that no failing
+bounce message ever lasts a week.
+
+
+
+ACL configuration
+~~~~~~~~~~~~~~~~~
+cindex:[default,ACLs]
+cindex:[{ACL},default configuration]
+In the default configuration, the ACL section follows the main configuration.
+It starts with the line
+
+ begin acl
+
+and it contains the definition of one ACL called 'acl_check_rcpt' that was
+referenced in the setting of %acl_smtp_rcpt% above.
+
+cindex:[RCPT,ACL for]
+This ACL is used for every RCPT command in an incoming SMTP message. Each
+RCPT command specifies one of the message's recipients. The ACL statements
+are considered in order, until the recipient address is either accepted or
+rejected. The RCPT command is then accepted or rejected, according to the
+result of the ACL processing.
+
+ acl_check_rcpt:
+
+This line, consisting of a name terminated by a colon, marks the start of the
+ACL, and names it.
+
+ accept hosts = :
+
+This ACL statement accepts the recipient if the sending host matches the list.
+But what does that strange list mean? It doesn't actually contain any host
+names or IP addresses. The presence of the colon puts an empty item in the
+list; Exim matches this only if the incoming message didn't come from a remote
+host. The colon is important. Without it, the list itself is empty, and can
+never match anything.
+
+What this statement is doing is to accept unconditionally all recipients in
+messages that are submitted by SMTP from local processes using the standard
+input and output (that is, not using TCP/IP). A number of MUAs operate in this
+manner.
+
+ deny domains = +local_domains
+ local_parts = ^[.] : ^.*[@%!/|]
+
+ deny domains = !+local_domains
+ local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
+
+These statements are concerned with local parts that contain any of the
+characters ``@'', ``%'', ``!'', ``/'', ``|'', or dots in unusual places. Although these
+characters are entirely legal in local parts (in the case of ``@'' and leading
+dots, only if correctly quoted), they do not commonly occur in Internet mail
+addresses.
+
+The first three have in the past been associated with explicitly routed
+addresses (percent is still sometimes used -- see the %percent_hack_domains%
+option). Addresses containing these characters are regularly tried by spammers
+in an attempt to bypass relaying restrictions, and also by open relay testing
+programs. Unless you really need them it is safest to reject these characters
+at this early stage. This configuration is heavy-handed in rejecting these
+characters for all messages it accepts from remote hosts. This is a deliberate
+policy of being as safe as possible.
+
+The first rule above is stricter, and is applied to messages that are addressed
+to one of the local domains handled by this host. This is implemented by the
+first condition, which restricts it to domains that are listed in the
+'local_domains' domain list. The ``+'' character is used to indicate a
+reference to a named list. In this configuration, there is just one domain in
+'local_domains', but in general there may be many.
+
+The second condition on the first statement uses two regular expressions to
+block local parts that begin with a dot or contain ``@'', ``%'', ``!'', ``/'', or ``|''.
+If you have local accounts that include these characters, you will have to
+modify this rule.
+
+Empty components (two dots in a row) are not valid in RFC 2822, but Exim
+allows them because they have been encountered in practice. (Consider local
+parts constructed as ``first-initial.second-initial.family-name'' when applied to
+someone like the author of Exim, who has no second initial.) However, a local
+part starting with a dot or containing ``/../'' can cause trouble if it is used
+as part of a file name (for example, for a mailing list). This is also true for
+local parts that contain slashes. A pipe symbol can also be troublesome if the
+local part is incorporated unthinkingly into a shell command line.
+
+The second rule above applies to all other domains, and is less strict. This
+allows your own users to send outgoing messages to sites that use slashes
+and vertical bars in their local parts. It blocks local parts that begin
+with a dot, slash, or vertical bar, but allows these characters within the
+local part. However, the sequence ``/../'' is barred. The use of ``@'', ``%'', and
+``!'' is blocked, as before. The motivation here is to prevent your users (or
+your users' viruses) from mounting certain kinds of attack on remote sites.
+
+ accept local_parts = postmaster
+ domains = +local_domains
+
+This statement, which has two conditions, accepts an incoming address if the
+local part is 'postmaster' and the domain is one of those listed in the
+'local_domains' domain list. The ``+'' character is used to indicate a
+reference to a named list. In this configuration, there is just one domain in
+'local_domains', but in general there may be many.
+
+The presence of this statement means that mail to postmaster is never blocked
+by any of the subsequent tests. This can be helpful while sorting out problems
+in cases where the subsequent tests are incorrectly denying access.
+
+ require verify = sender
+
+This statement requires the sender address to be verified before any subsequent
+ACL statement can be used. If verification fails, the incoming recipient
+address is refused. Verification consists of trying to route the address, to
+see if a
+bounce
+message could be delivered to it. In the case of remote addresses, basic
+verification checks only the domain, but 'callouts' can be used for more
+verification if required. Section <<SECTaddressverification>> discusses the
+details of address verification.
+
+....
+# deny message = rejected because $sender_host_address is \
+# in a black list at $dnslist_domain\n\
+# $dnslist_text
+# dnslists = black.list.example
+#
+# warn message = X-Warning: $sender_host_address is \
+# in a black list at $dnslist_domain
+# log_message = found in $dnslist_domain
+# dnslists = black.list.example
+....
+
+These commented-out lines are examples of how you could configure Exim to check
+sending hosts against a DNS black list. The first statement rejects messages
+from blacklisted hosts, whereas the second merely inserts a warning header
+line.
+
+ accept domains = +local_domains
+ endpass
+ message = unknown user
+ verify = recipient
+
+This statement accepts the incoming recipient address if its domain is one of
+the local domains, but only if the address can be verified. Verification of
+local addresses normally checks both the local part and the domain. The
+%endpass% line needs some explanation: if the condition above %endpass% fails,
+that is, if the address is not in a local domain, control is passed to the next
+ACL statement. However, if the condition below %endpass% fails, that is, if a
+recipient in a local domain cannot be verified, access is denied and the
+recipient is rejected.
+
+cindex:[customizing,ACL failure message]
+The %message% modifier provides a customized error message for the failure.
+
+ accept domains = +relay_to_domains
+ endpass
+ message = unrouteable address
+ verify = recipient
+
+This statement accepts the incoming recipient address if its domain is one of
+the domains for which this host is a relay, but again, only if the address can
+be verified.
+
+ accept hosts = +relay_from_hosts
+
+Control reaches this statement only if the recipient's domain is neither a
+local domain, nor a relay domain. The statement accepts the address if the
+message is coming from one of the hosts that are defined as being allowed to
+relay through this host. Recipient verification is omitted here, because in
+many cases the clients are dumb MUAs that do not cope well with SMTP error
+responses. If you are actually relaying out from MTAs, you should probably add
+recipient verification here.
+
+ accept authenticated = *
+
+Control reaches here for attempts to relay to arbitrary domains from arbitrary
+hosts. The statement accepts the address only if the client host has
+authenticated itself. The default configuration does not define any
+authenticators, which means that no client can in fact authenticate. You will
+need to add authenticator definitions if you want to make use of this ACL
+statement.
+
+ deny message = relay not permitted
+
+The final statement denies access, giving a specific error message. Reaching
+the end of the ACL also causes access to be denied, but with the generic
+message ``administrative prohibition''.
+
+
+
+Router configuration
+~~~~~~~~~~~~~~~~~~~~
+cindex:[default,routers]
+cindex:[routers,default]
+The router configuration comes next in the default configuration, introduced
+by the line
+
+ begin routers
+
+Routers are the modules in Exim that make decisions about where to send
+messages. An address is passed to each router in turn, until it is either
+accepted, or failed. This means that the order in which you define the routers
+matters. Each router is fully described in its own chapter later in this
+manual. Here we give only brief overviews.
+
+ # domain_literal:
+ # driver = ipliteral
+ # domains = !+local_domains
+ # transport = remote_smtp
+
+cindex:[domain literal,default router]
+This router is commented out because the majority of sites do not want to
+support domain literal addresses (those of the form 'user@[10.9.8.7]'). If
+you uncomment this router, you also need to uncomment the setting of
+%allow_domain_literals% in the main part of the configuration.
+
+ dnslookup:
+ driver = dnslookup
+ domains = ! +local_domains
+ transport = remote_smtp
+ ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
+ no_more
+
+The first uncommented router handles addresses that do not involve any local
+domains. This is specified by the line
+
+ domains = ! +local_domains
+
+The %domains% option lists the domains to which this router applies, but the
+exclamation mark is a negation sign, so the router is used only for domains
+that are not in the domain list called 'local_domains' (which was defined at
+the start of the configuration). The plus sign before 'local_domains'
+indicates that it is referring to a named list. Addresses in other domains are
+passed on to the following routers.
+
+The name of the router driver is ^dnslookup^,
+and is specified by the %driver% option. Do not be confused by the fact that
+the name of this router instance is the same as the name of the driver. The
+instance name is arbitrary, but the name set in the %driver% option must be one
+of the driver modules that is in the Exim binary.
+
+The ^dnslookup^ router routes addresses by looking up their domains in the
+DNS in order to obtain a list of hosts to which the address is routed. If the
+router succeeds, the address is queued for the ^remote_smtp^ transport, as
+specified by the %transport% option. If the router does not find the domain in
+the DNS, no further routers are tried because of the %no_more% setting, so the
+address fails and is bounced.
+
+The %ignore_target_hosts% option specifies a list of IP addresses that are to
+be entirely ignored. This option is present because a number of cases have been
+encountered where MX records in the DNS point to host names
+whose IP addresses are 0.0.0.0 or are in the 127 subnet (typically 127.0.0.1).
+Completely ignoring these IP addresses causes Exim to fail to route the
+email address, so it bounces. Otherwise, Exim would log a routing problem, and
+continue to try to deliver the message periodically until the address timed
+out.
+
+ system_aliases:
+ driver = redirect
+ allow_fail
+ allow_defer
+ data = ${lookup{$local_part}lsearch{/etc/aliases}}
+ # user = exim
+ file_transport = address_file
+ pipe_transport = address_pipe
+
+Control reaches this and subsequent routers only for addresses in the local
+domains. This router checks to see whether the local part is defined as an
+alias in the _/etc/aliases_ file, and if so, redirects it according to the
+data that it looks up from that file. If no data is found for the local part,
+the value of the %data% option is empty, causing the address to be passed to
+the next router.
+
+_/etc/aliases_ is a conventional name for the system aliases file that is
+often used. That is why it is referenced by from the default configuration
+file. However, you can change this by setting SYSTEM_ALIASES_FILE in
+_Local/Makefile_ before building Exim.
+
+ userforward:
+ driver = redirect
+ check_local_user
+ file = $home/.forward
+ no_verify
+ no_expn
+ check_ancestor
+ # allow_filter
+ file_transport = address_file
+ pipe_transport = address_pipe
+ reply_transport = address_reply
+
+This is the most complicated router in the default configuration. It is another
+redirection router, but this time it is looking for forwarding data set up by
+individual users. The %check_local_user% setting means that the first thing it
+does is to check that the local part of the address is the login name of a
+local user. If it is not, the router is skipped. When a local user is found,
+the file called _.forward_ in the user's home directory is consulted. If it
+does not exist, or is empty, the router declines. Otherwise, the contents of
+_.forward_ are interpreted as redirection data (see chapter <<CHAPredirect>>
+for more details).
+
+cindex:[Sieve filter,enabling in default router]
+Traditional _.forward_ files contain just a list of addresses, pipes, or
+files. Exim supports this by default. However, if %allow_filter% is set (it is
+commented out by default), the contents of the file are interpreted as a set of
+Exim or Sieve filtering instructions, provided the file begins with ``#Exim
+filter'' or ``#Sieve filter'', respectively. User filtering is discussed in the
+separate document entitled 'Exim's interfaces to mail filtering'.
+
+The %no_verify% and %no_expn% options mean that this router is skipped when
+verifying addresses, or when running as a consequence of an SMTP EXPN
+command.
+There are two reasons for doing this:
+
+. Whether or not a local user has a _.forward_ file is not really relevant when
+checking an address for validity; it makes sense not to waste resources doing
+unnecessary work.
+
+. More importantly, when Exim is verifying addresses or handling an EXPN
+command during an SMTP session, it is running as the Exim user, not as root.
+The group is the Exim group, and no additional groups are set up.
+It may therefore not be possible for Exim to read users' _.forward_ files at
+this time.
+
+
+The setting of %check_ancestor% prevents the router from generating a new
+address that is the same as any previous address that was redirected. (This
+works round a problem concerning a bad interaction between aliasing and
+forwarding -- see section <<SECTredlocmai>>).
+
+The final three option settings specify the transports that are to be used when
+forwarding generates a direct delivery to a file, or to a pipe, or sets up an
+auto-reply, respectively. For example, if a _.forward_ file contains
+
+ a.nother@elsewhere.example, /home/spqr/archive
+
+the delivery to _/home/spqr/archive_ is done by running the %address_file%
+transport.
+
+ localuser:
+ driver = accept
+ check_local_user
+ transport = local_delivery
+
+The final router sets up delivery into local mailboxes, provided that the local
+part is the name of a local login, by accepting the address and queuing it for
+the ^local_delivery^ transport. Otherwise, we have reached the end of the
+routers, so the address is bounced.
+
+
+
+Transport configuration
+~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[default,transports]
+cindex:[transports,default]
+Transports define mechanisms for actually delivering messages. They operate
+only when referenced from routers, so the order in which they are defined does
+not matter. The transports section of the configuration starts with
+
+ begin transports
+
+One remote transport and four local transports are defined.
+
+ remote_smtp:
+ driver = smtp
+
+This transport is used for delivering messages over SMTP connections. All its
+options are defaulted. The list of remote hosts comes from the router.
+
+ local_delivery:
+ driver = appendfile
+ file = /var/mail/$local_part
+ delivery_date_add
+ envelope_to_add
+ return_path_add
+ # group = mail
+ # mode = 0660
+
+This ^appendfile^ transport is used for local delivery to user mailboxes in
+traditional BSD mailbox format. By default it runs under the uid and gid of the
+local user, which requires the sticky bit to be set on the _/var/mail_
+directory. Some systems use the alternative approach of running mail deliveries
+under a particular group instead of using the sticky bit. The commented options
+show how this can be done.
+
+Exim adds three headers to the message as it delivers it: 'Delivery-date:',
+'Envelope-to:' and 'Return-path:'. This action is requested by the three
+similarly-named options above.
+
+ address_pipe:
+ driver = pipe
+ return_output
+
+This transport is used for handling deliveries to pipes that are generated by
+redirection (aliasing or users' _.forward_ files). The %return_output%
+option specifies that any output generated by the pipe is to be returned to the
+sender.
+
+ address_file:
+ driver = appendfile
+ delivery_date_add
+ envelope_to_add
+ return_path_add
+
+This transport is used for handling deliveries to files that are generated by
+redirection. The name of the file is not specified in this instance of
+^appendfile^, because it comes from the ^redirect^ router.
+
+ address_reply:
+ driver = autoreply
+
+This transport is used for handling automatic replies generated by users'
+filter files.
+
+
+
+Default retry rule
+~~~~~~~~~~~~~~~~~~
+cindex:[retry,default rule]
+cindex:[default,retry rule]
+The retry section of the configuration file contains rules which affect the way
+Exim retries deliveries that cannot be completed at the first attempt. It is
+introduced by the line
+
+ begin retry
+
+In the default configuration, there is just one rule, which applies to all
+errors:
+
+&&&
+`\* \* F,2h,15m; G,16h,1h,1.5; F,4d,6h`
+&&&
+
+This causes any temporarily failing address to be retried every 15 minutes for
+2 hours, then at intervals starting at one hour and increasing by a factor of
+1.5 until 16 hours have passed, then every 6 hours up to 4 days. If an address
+is not delivered after 4 days of failure, it is bounced.
+
+
+
+Rewriting configuration
+~~~~~~~~~~~~~~~~~~~~~~~
+The rewriting section of the configuration, introduced by
+
+ begin rewrite
+
+contains rules for rewriting addresses in messages as they arrive. There are no
+rewriting rules in the default configuration file.
+
+
+
+Authenticators configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[AUTH,configuration]
+The authenticators section of the configuration, introduced by
+
+ begin authenticators
+
+defines mechanisms for the use of the SMTP AUTH command. No authenticators
+are specified in the default configuration file.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPregexp]]
+Regular expressions
+-------------------
+
+cindex:[regular expressions,library]
+cindex:[PCRE]
+Exim supports the use of regular expressions in many of its options. It
+uses the PCRE regular expression library; this provides regular expression
+matching that is compatible with Perl 5. The syntax and semantics of
+regular expressions is discussed in many Perl reference books, and also in
+Jeffrey Friedl's 'Mastering Regular Expressions', which is published by
+O'Reilly (*http://www.oreilly.com/catalog/regex/[]*).
+
+The documentation for the syntax and semantics of the regular expressions that
+are supported by PCRE is included in plain text in the file
+_doc/pcrepattern.txt_ in the Exim distribution, and also in the HTML
+tarbundle of Exim documentation, and as an appendix to the Exim book
+(*http://www.uit.co.uk/exim-book/[]*).
+
+It describes in detail the features of the regular expressions that PCRE
+supports, so no further description is included here. The PCRE functions are
+called from Exim using the default option settings (that is, with no PCRE
+options set), except that the PCRE_CASELESS option is set when the
+matching is required to be case-insensitive.
+
+In most cases, when a regular expression is required in an Exim configuration,
+it has to start with a circumflex, in order to distinguish it from plain text
+or an ``ends with'' wildcard. In this example of a configuration setting, the
+second item in the colon-separated list is a regular expression.
+
+ domains = a.b.c : ^\\d{3} : *.y.z : ...
+
+The doubling of the backslash is required because of string expansion that
+precedes interpretation -- see section <<SECTlittext>> for more discussion of
+this issue, and a way of avoiding the need for doubling backslashes. The
+regular expression that is eventually used in this example contains just one
+backslash. The circumflex is included in the regular expression, and has the
+normal effect of ``anchoring'' it to the start of the string that is being
+matched.
+
+There are, however, two cases where a circumflex is not required for the
+recognition of a regular expression: these are the %match% condition in a
+string expansion, and the %matches% condition in an Exim filter file. In these
+cases, the relevant string is always treated as a regular expression; if it
+does not start with a circumflex, the expression is not anchored, and can match
+anywhere in the subject string.
+
+In all cases, if you want a regular expression to match at the end of a string,
+you must code the \$ metacharacter to indicate this. For example:
+
+ domains = ^\\d{3}\\.example
+
+matches the domain '123.example', but it also matches '123.example.com'.
+You need to use:
+
+ domains = ^\\d{3}\\.example\$
+
+if you want 'example' to be the top-level domain. (The backslash before the
+\$ is another artefact of string expansion.)
+
+
+
+Testing regular expressions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[testing,regular expressions]
+cindex:[regular expressions,testing]
+cindex:['pcretest']
+A program called 'pcretest' forms part of the PCRE distribution and is built
+with PCRE during the process of building Exim. It is primarily intended for
+testing PCRE itself, but it can also be used for experimenting with regular
+expressions. After building Exim, the binary can be found in the build
+directory (it is not installed anywhere automatically). There is documentation
+of various options in _doc/pcretest.txt_, but for simple testing, none are
+needed. This is the output of a sample run of 'pcretest':
+
+&&&
+` re> `*`/^([^@]+)@.+\.(ac|edu)\.(?!kr)[a-z]{2}$/`*
+`data> `*`x@y.ac.uk`*
+` 0: x@y.ac.uk`
+` 1: x`
+` 2: ac`
+`data> `*`x@y.ac.kr`*
+`No match`
+`data> `*`x@y.edu.com`*
+`No match`
+`data> `*`x@y.edu.co`*
+` 0: x@y.edu.co`
+` 1: x`
+` 2: edu`
+&&&
+
+Input typed by the user is shown in bold face. After the ``re>'' prompt, a
+regular expression enclosed in delimiters is expected. If this compiles without
+error, ``data>'' prompts are given for strings against which the expression is
+matched. An empty data line causes a new regular expression to be read. If the
+match is successful, the captured substring values (that is, what would be in
+the variables $0$, $1$, $2$, etc.) are shown. The above example tests for an
+email address whose domain ends with either ``ac'' or ``edu'' followed by a
+two-character top-level domain that is not ``kr''. The local part is captured
+in $1$ and the ``ac'' or ``edu'' in $2$.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPfdlookup]]
+File and database lookups
+-------------------------
+cindex:[file,lookup]
+cindex:[database lookups]
+cindex:[lookup,description of]
+Exim can be configured to look up data in files or databases as it processes
+messages. Two different kinds of syntax are used:
+
+. A string that is to be expanded may contain explicit lookup requests. These
+cause parts of the string to be replaced by data that is obtained from the
+lookup.
+
+. Lists of domains, hosts, and email addresses can contain lookup requests as a
+way of avoiding excessively long linear lists. In this case, the data that is
+returned by the lookup is often (but not always) discarded; whether the lookup
+succeeds or fails is what really counts. These kinds of list are described in
+chapter <<CHAPdomhosaddlists>>.
+
+It is easy to confuse the two different kinds of lookup, especially as the
+lists that may contain the second kind are always expanded before being
+processed as lists. Therefore, they may also contain lookups of the first kind.
+Be careful to distinguish between the following two examples:
+
+ domains = ${lookup{$sender_host_address}lsearch{/some/file}}
+ domains = lsearch;/some/file
+
+The first uses a string expansion, the result of which must be a domain list.
+String expansions are described in detail in chapter <<CHAPexpand>>. The
+expansion takes place first, and the file that is searched could contain lines
+like this:
+
+ 192.168.3.4: domain1 : domain2 : ...
+ 192.168.1.9: domain3 : domain4 : ...
+
+Thus, the result of the expansion is a list of domains (and possibly other
+types of item that are allowed in domain lists).
+
+In the second case, the lookup is a single item in a domain list. It causes
+Exim to use a lookup to see if the domain that is being processed can be found
+in the file. The file could contains lines like this:
+
+ domain1:
+ domain2:
+
+Any data that follows the keys is not relevant when checking that the domain
+matches the list item.
+
+It is possible to use both kinds of lookup at once. Consider a file containing
+lines like this:
+
+ 192.168.5.6: lsearch;/another/file
+
+If the value of $sender_host_address$ is 192.168.5.6, expansion of the
+first %domains% setting above generates the second setting, which therefore
+causes a second lookup to occur.
+
+The rest of this chapter describes the different lookup types that are
+available. Any of them can be used in either of the circumstances described
+above. The syntax requirements for the two cases are described in chapters
+<<CHAPexpand>> and <<CHAPdomhosaddlists>>, respectively.
+
+
+Lookup types
+~~~~~~~~~~~~
+cindex:[lookup,types of]
+cindex:[single-key lookup,definition of]
+Two different styles of data lookup are implemented:
+
+- The 'single-key' style requires the specification of a file in which to look,
+and a single key to search for. The key must be a non-empty string for the
+lookup to succeed. The lookup type determines how the file is searched.
+
+- cindex:[query-style lookup,definition of]
+The 'query' style accepts a generalized database query.
+No particular key value is assumed by Exim for query-style lookups. You can
+use whichever Exim variable(s) you need to construct the database query.
+
+The code for each lookup type is in a separate source file that is included in
+the binary of Exim only if the corresponding compile-time option is set. The
+default settings in _src/EDITME_ are:
+
+ LOOKUP_DBM=yes
+ LOOKUP_LSEARCH=yes
+
+which means that only linear searching and DBM lookups are included by default.
+For some types of lookup (e.g. SQL databases), you need to install appropriate
+libraries and header files before building Exim.
+
+
+
+
+[[SECTsinglekeylookups]]
+Single-key lookup types
+~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[lookup,single-key types]
+cindex:[single-key lookup,list of types]
+The following single-key lookup types are implemented:
+
+- cindex:[cdb,description of]
+cindex:[lookup,cdb]
+cindex:[binary zero,in lookup key]
+^cdb^: The given file is searched as a Constant DataBase file, using the key
+string without a terminating binary zero. The cdb format is designed for
+indexed files that are read frequently and never updated, except by total
+re-creation. As such, it is particulary suitable for large files containing
+aliases or other indexed data referenced by an MTA. Information about cdb can
+be found in several places:
++
+&&&
+*http://www.pobox.com/~djb/cdb.html[]*
+*ftp://ftp.corpit.ru/pub/tinycdb/[]*
+*http://packages.debian.org/stable/utils/freecdb.html[]*
+&&&
++
+A cdb distribution is not needed in order to build Exim with cdb support,
+because the code for reading cdb files is included directly in Exim itself.
+However, no means of building or testing cdb files is provided with Exim, so
+you need to obtain a cdb distribution in order to do this.
+
+- cindex:[DBM,lookup type]
+cindex:[lookup,dbm]
+cindex:[binary zero,in lookup key]
+^dbm^: Calls to DBM library functions are used to extract data from the given
+DBM file by looking up the record with the given key. A terminating binary
+zero is included in the key that is passed to the DBM library. See section
+<<SECTdb>> for a discussion of DBM libraries.
++
+cindex:[Berkeley DB library,file format]
+For all versions of Berkeley DB, Exim uses the DB_HASH style of database
+when building DBM files using the %exim_dbmbuild% utility. However, when using
+Berkeley DB versions 3 or 4, it opens existing databases for reading with the
+DB_UNKNOWN option. This enables it to handle any of the types of database
+that the library supports, and can be useful for accessing DBM files created by
+other applications. (For earlier DB versions, DB_HASH is always used.)
+
+- cindex:[lookup,dbmnz]
+cindex:[lookup,dbm -- terminating zero]
+cindex:[binary zero,in lookup key]
+cindex:[Courier]
+cindex:[_/etc/userdbshadow.dat_]
+cindex:[dmbnz lookup type]
+^dbmnz^: This is the same as ^dbm^, except that a terminating binary zero
+is not included in the key that is passed to the DBM library. You may need this
+if you want to look up data in files that are created by or shared with some
+other application that does not use terminating zeros. For example, you need to
+use ^dbmnz^ rather than ^dbm^ if you want to authenticate incoming SMTP
+calls using the passwords from Courier's _/etc/userdbshadow.dat_ file. Exim's
+utility program for creating DBM files ('exim_dbmbuild') includes the zeros
+by default, but has an option to omit them (see section <<SECTdbmbuild>>).
+
+- cindex:[lookup,dsearch]
+cindex:[dsearch lookup type]
+^dsearch^: The given file must be a directory; this is searched for a file
+whose name is the key. The key may not contain any forward slash characters.
+The result of a successful lookup is the name of the file. An example of how
+this lookup can be used to support virtual domains is given in section
+<<SECTvirtualdomains>>.
+
+- cindex:[lookup,iplsearch]
+cindex:[iplsearch lookup type]
+^iplsearch^: The given file is a text file containing keys and data. A key is
+terminated by a colon or white space or the end of the line. The keys in the
+file must be IP addresses, or IP addresses with CIDR masks. Keys that involve
+IPv6 addresses must be enclosed in quotes to prevent the first internal colon
+being interpreted as a key terminator. For example:
+
+ 1.2.3.4: data for 1.2.3.4
+ 192.168.0.0/16 data for 192.168.0.0/16
+ "abcd::cdab": data for abcd::cdab
+ "abcd:abcd::/32" data for abcd:abcd::/32
++
+The key for an ^iplsearch^ lookup must be an IP address (without a mask). The
+file is searched linearly, using the CIDR masks where present, until a matching
+key is found. The first key that matches is used; there is no attempt to find a
+``best'' match. Apart from the way the keys are matched, the processing for
+^iplsearch^ is the same as for ^lsearch^.
++
+*Warning 1*: Unlike most other single-key lookup types, a file of data for
+^iplsearch^ can 'not' be turned into a DBM or cdb file, because those
+lookup types support only literal keys.
++
+*Warning 2*: In a host list, you must always use ^net-iplsearch^ so that
+the implicit key is the host's IP address rather than its name (see section
+<<SECThoslispatsikey>>).
+
+- cindex:[linear search]
+cindex:[lookup,lsearch]
+cindex:[lsearch lookup type]
+^lsearch^: The given file is a text file that is searched linearly for a
+line beginning with the search key, terminated by a colon or white space or the
+end of the line. The first occurrence that is found in the file is used. White
+space between the key and the colon is permitted. The remainder of the line,
+with leading and trailing white space removed, is the data. This can be
+continued onto subsequent lines by starting them with any amount of white
+space, but only a single space character is included in the data at such a
+junction. If the data begins with a colon, the key must be terminated by a
+colon, for example:
+
+ baduser: :fail:
++
+Empty lines and lines beginning with # are ignored, even if they occur in the
+middle of an item. This is the traditional textual format of alias files. Note
+that the keys in an ^lsearch^ file are literal strings. There is no
+wildcarding of any kind.
++
+cindex:[lookup,lsearch -- colons in keys]
+cindex:[whitespace,in lsearch key]
+In most ^lsearch^ files, keys are not required to contain colons or #
+characters, or whitespace. However, if you need this feature, it is available.
+If a key begins with a doublequote character, it is terminated only by a
+matching quote (or end of line), and the normal escaping rules apply to its
+contents (see section <<SECTstrings>>). An optional colon is permitted after
+quoted keys (exactly as for unquoted keys). There is no special handling of
+quotes for the data part of an ^lsearch^ line.
+
+- cindex:[NIS lookup type]
+cindex:[lookup,NIS]
+cindex:[binary zero,in lookup key]
+^nis^: The given file is the name of a NIS map, and a NIS lookup is done with
+the given key, without a terminating binary zero. There is a variant called
+^nis0^ which does include the terminating binary zero in the key. This is
+reportedly needed for Sun-style alias files. Exim does not recognize NIS
+aliases; the full map names must be used.
+
+- cindex:[wildlsearch lookup type]
+cindex:[lookup,wildlsearch]
+cindex:[nwildlsearch lookup type]
+cindex:[lookup,nwildlsearch]
+^wildlsearch^ or ^nwildlsearch^: These search a file linearly, like
+^lsearch^, but instead of being interpreted as a literal string, each key may
+be wildcarded. The difference between these two lookup types is that for
+^wildlsearch^, each key in the file is string-expanded before being used,
+whereas for ^nwildlsearch^, no expansion takes place.
++
+Like ^lsearch^, the testing is done case-insensitively. The following forms
+of wildcard are recognized:
++
+--
+.. The string may begin with an asterisk to mean ``ends with''. For example:
+
+ *.a.b.c data for anything.a.b.c
+ *fish data for anythingfish
+
+.. The string may begin with a circumflex to indicate a regular expression. For
+example, for ^wildlsearch^:
+
+ ^\N\d+\.a\.b\N data for <digits>.a.b
+
+Note the use of `\N` to disable expansion of the contents of the regular
+expression. If you are using ^nwildlsearch^, where the keys are not
+string-expanded, the equivalent entry is:
+
+ ^\d+\.a\.b data for <digits>.a.b
+
+If the regular expression contains white space or colon characters, you must
+either quote it (see ^lsearch^ above), or represent these characters in other
+ways. For example, `\s` can be used for white space and `\x3A` for a
+colon. This may be easier than quoting, because if you quote, you have to
+escape all the backslashes inside the quotes.
+
+.. Although I cannot see it being of much use, the general matching function
+that is used to implement ^(n)wildlsearch^ means that the string may begin with
+a lookup name terminated by a semicolon, and followed by lookup data. For
+example:
+
+ cdb;/some/file data for keys that match the file
+
+The data that is obtained from the nested lookup is discarded.
+--
++
+Keys that do not match any of these patterns are interpreted literally. The
+continuation rules for the data are the same as for ^lsearch^, and keys may
+be followed by optional colons.
++
+*Warning*: Unlike most other single-key lookup types, a file of data for
+^(n)wildlsearch^ can 'not' be turned into a DBM or cdb file, because those
+lookup types support only literal keys.
+
+
+
+Query-style lookup types
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[lookup,query-style types]
+cindex:[query-style lookup,list of types]
+The supported query-style lookup types are listed below. Further details about
+many of them are given in later sections.
+
+- cindex:[DNS,as a lookup type]
+cindex:[lookup,DNS]
+^dnsdb^: This does a DNS search for one or more records whose domain names are
+given in the supplied query. The resulting data is the contents of the records.
+See section <<SECTdnsdb>>.
+
+- cindex:[Interbase lookup type]
+cindex:[lookup,Interbase]
+^ibase^: This does a lookup in an Interbase database.
+
+- cindex:[LDAP,lookup type]
+cindex:[lookup,LDAP]
+^ldap^: This does an LDAP lookup using a query in the form of a URL, and
+returns attributes from a single entry. There is a variant called ^ldapm^
+that permits values from multiple entries to be returned. A third variant
+called ^ldapdn^ returns the Distinguished Name of a single entry instead of
+any attribute values. See section <<SECTldap>>.
+
+- cindex:[MySQL,lookup type]
+cindex:[lookup,MySQL]
+^mysql^: The format of the query is an SQL statement that is passed to a MySQL
+database. See section <<SECTsql>>.
+
+- cindex:[NIS+ lookup type]
+cindex:[lookup,NIS+]
+^nisplus^: This does a NIS+ lookup using a query that can specify the name of
+the field to be returned. See section <<SECTnisplus>>.
+
+- cindex:[Oracle,lookup type]
+cindex:[lookup,Oracle]
+^oracle^: The format of the query is an SQL statement that is passed to an
+Oracle database. See section <<SECTsql>>.
+
+- cindex:[lookup,passwd]
+cindex:[passwd lookup type]
+cindex:[_/etc/passwd_]
+^passwd^ is a query-style lookup with queries that are just user names. The
+lookup calls 'getpwnam()' to interrogate the system password data, and on
+success, the result string is the same as you would get from an ^lsearch^
+lookup on a traditional _/etc/passwd file_, though with `*` for the
+password value. For example:
+
+ *:42:42:King Rat:/home/kr:/bin/bash
+
+- cindex:[PostgreSQL lookup type]
+cindex:[lookup,PostgreSQL]
+^pgsql^: The format of the query is an SQL statement that is passed to a
+PostgreSQL database. See section <<SECTsql>>.
+
+- ^testdb^: This is a lookup type that is used for testing Exim. It is
+not likely to be useful in normal operation.
+
+- cindex:[whoson lookup type]
+cindex:[lookup,whoson]
+^whoson^: 'Whoson' (*http://whoson.sourceforge.net[]*) is a proposed
+Internet protocol that allows Internet server programs to check whether a
+particular (dynamically allocated) IP address is currently allocated to a known
+(trusted) user and, optionally, to obtain the identity of the said user. In
+Exim, this can be used to implement ``POP before SMTP'' checking using ACL
+statements such as
++
+....
+require condition = \
+ ${lookup whoson {$sender_host_address}{yes}{no}}
+....
++
+The query consists of a single IP address. The value returned is the name of
+the authenticated user.
+
+
+
+Temporary errors in lookups
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[lookup,temporary error in]
+Lookup functions can return temporary error codes if the lookup cannot be
+completed. For example, a NIS or LDAP database might be unavailable. For this
+reason, it is not advisable to use a lookup that might do this for critical
+options such as a list of local domains.
+
+When a lookup cannot be completed in a router or transport, delivery
+of the message (to the relevant address) is deferred, as for any other
+temporary error. In other circumstances Exim may assume the lookup has failed,
+or may give up altogether.
+
+
+
+[[SECTdefaultvaluelookups]]
+Default values in single-key lookups
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[wildcard lookups]
+cindex:[lookup,default values]
+cindex:[lookup,wildcard]
+cindex:[lookup,\* added to type]
+cindex:[default,in single-key lookups]
+In this context, a ``default value'' is a value specified by the administrator
+that is to be used if a lookup fails.
+
+If ``\*'' is added to a single-key lookup type (for example, %lsearch\*%) and
+the initial lookup fails, the key ``\*'' is looked up in the file to provide
+a default value. See also the section on partial matching below.
+
+cindex:[\*@ with single-key lookup]
+cindex:[lookup,\*@ added to type]
+cindex:[alias file,per-domain default]
+Alternatively, if ``\*@'' is added to a single-key lookup type (for example
+\dbm\*\) then, if the initial lookup fails and the key contains an @
+character, a second lookup is done with everything before the last @ replaced
+by \*. This makes it possible to provide per-domain defaults in alias files
+that include the domains in the keys. If the second lookup fails (or doesn't
+take place because there is no @ in the key), ``\*'' is looked up.
+For example, a ^redirect^ router might contain:
+
+ data = ${lookup{$local_part@$domain}lsearch*@{/etc/mixed-aliases}}
+
+Suppose the address that is being processed is 'jane@eyre.example'. Exim
+looks up these keys, in this order:
+
+ jane@eyre.example
+ *@eyre.example
+ *
+
+The data is taken from whichever key it finds first. *Note*: in an
+^lsearch^ file, this does not mean the first of these keys in the file. A
+complete scan is done for each key, and only if it is not found at all does
+Exim move on to try the next key.
+
+
+
+[[SECTpartiallookup]]
+Partial matching in single-key lookups
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[partial matching]
+cindex:[wildcard lookups]
+cindex:[lookup,partial matching]
+cindex:[lookup,wildcard]
+cindex:[asterisk,in search type]
+The normal operation of a single-key lookup is to search the file for an exact
+match with the given key. However, in a number of situations where domains are
+being looked up, it is useful to be able to do partial matching. In this case,
+information in the file that has a key starting with ``\*.'' is matched by any
+domain that ends with the components that follow the full stop. For example, if
+a key in a DBM file is
+
+ *.dates.fict.example
+
+then when partial matching is enabled this is matched by (amongst others)
+'2001.dates.fict.example' and '1984.dates.fict.example'. It is also matched
+by 'dates.fict.example', if that does not appear as a separate key in the
+file.
+
+*Note*: Partial matching is not available for query-style lookups. It is
+also not available for any lookup items in address lists (see section
+<<SECTaddresslist>>).
+
+Partial matching is implemented by doing a series of separate lookups using
+keys constructed by modifying the original subject key. This means that it can
+be used with any of the single-key lookup types, provided that
+partial matching keys
+beginning with a special prefix (default ``\*.'') are included in the data file.
+Keys in the file that do not begin with the prefix are matched only by
+unmodified subject keys when partial matching is in use.
+
+Partial matching is requested by adding the string ``partial-'' to the front of
+the name of a single-key lookup type, for example, %partial-dbm%. When this is
+done, the subject key is first looked up unmodified; if that fails, ``\*.''
+is added at the start of the subject key, and it is looked up again. If that
+fails, further lookups are tried with dot-separated components removed
+from the start of the subject key, one-by-one, and ``\*.'' added on the front of
+what remains.
+
+A minimum number of two non-\* components are required. This can be adjusted
+by including a number before the hyphen in the search type. For example,
+%partial3-lsearch% specifies a minimum of three non-\* components in the
+modified keys. Omitting the number is equivalent to ``partial2-''. If the subject
+key is '2250.dates.fict.example' then the following keys are looked up when
+the minimum number of non-\* components is two:
+
+ 2250.dates.fict.example
+ *.2250.dates.fict.example
+ *.dates.fict.example
+ *.fict.example
+
+As soon as one key in the sequence is successfully looked up, the lookup
+finishes.
+
+cindex:[lookup,partial matching -- changing prefix]
+cindex:[prefix,for partial matching]
+The use of ``\*.'' as the partial matching prefix is a default that can be
+changed. The motivation for this feature is to allow Exim to operate with file
+formats that are used by other MTAs. A different prefix can be supplied in
+parentheses instead of the hyphen after ``partial''. For example:
+
+ domains = partial(.)lsearch;/some/file
+
+In this example, if the domain is 'a.b.c', the sequence of lookups is
+`a.b.c`, `.a.b.c`, and `.b.c` (the default minimum of 2 non-wild
+components is unchanged). The prefix may consist of any punctuation characters
+other than a closing parenthesis. It may be empty, for example:
+
+ domains = partial1()cdb;/some/file
+
+For this example, if the domain is 'a.b.c', the sequence of lookups is
+`a.b.c`, `b.c`, and `c`.
+
+If ``partial0'' is specified, what happens at the end (when the lookup with just
+one non-wild component has failed, and the original key is shortened right down
+to the null string) depends on the prefix:
+
+- If the prefix has zero length, the whole lookup fails.
+
+- If the prefix has length 1, a lookup for just the prefix is done. For
+example, the final lookup for ``partial0(.)'' is for `.` alone.
+
+- Otherwise, if the prefix ends in a dot, the dot is removed, and the
+remainder is looked up. With the default prefix, therefore, the final lookup is
+for ``\*'' on its own.
+
+- Otherwise, the whole prefix is looked up.
+
+
+If the search type ends in ``\*'' or ``\*@'' (see section
+<<SECTdefaultvaluelookups>> above), the search for an ultimate default that this
+implies happens after all partial lookups have failed. If ``partial0'' is
+specified, adding ``\*'' to the search type has no effect with the default
+prefix, because the ``\*'' key is already included in the sequence of partial
+lookups. However, there might be a use for lookup types such as
+``partial0(.)lsearch\*''.
+
+The use of ``\*'' in lookup partial matching differs from its use as a wildcard
+in domain lists and the like. Partial matching works only in terms of
+dot-separated components; a key such as `*fict.example`
+in a database file is useless, because the asterisk in a partial matching
+subject key is always followed by a dot.
+
+
+
+
+Lookup caching
+~~~~~~~~~~~~~~
+cindex:[lookup,caching]
+cindex:[caching,lookup data]
+Exim caches all lookup results in order to avoid needless repetition of
+lookups. However, because (apart from the daemon) Exim operates as a collection
+of independent, short-lived processes, this caching applies only within a
+single Exim process. There is no inter-process caching facility.
+
+For single-key lookups, Exim keeps the relevant files open in case there is
+another lookup that needs them. In some types of configuration this can lead to
+many files being kept open for messages with many recipients. To avoid hitting
+the operating system limit on the number of simultaneously open files, Exim
+closes the least recently used file when it needs to open more files than its
+own internal limit, which can be changed via the %lookup_open_max% option.
+
+The single-key lookup files are closed and the lookup caches are flushed at
+strategic points during delivery -- for example, after all routing is complete.
+
+
+
+
+Quoting lookup data
+~~~~~~~~~~~~~~~~~~~
+cindex:[lookup,quoting]
+cindex:[quoting,in lookups]
+When data from an incoming message is included in a query-style lookup, there
+is the possibility of special characters in the data messing up the syntax of
+the query. For example, a NIS+ query that contains
+
+ [name=$local_part]
+
+will be broken if the local part happens to contain a closing square bracket.
+For NIS+, data can be enclosed in double quotes like this:
+
+ [name="$local_part"]
+
+but this still leaves the problem of a double quote in the data. The rule for
+NIS+ is that double quotes must be doubled. Other lookup types have different
+rules, and to cope with the differing requirements, an expansion operator
+of the following form is provided:
+
+ \$\{quote_<lookup-type>:<string>\}
+
+For example, the safest way to write the NIS+ query is
+
+ [name="${quote_nisplus:$local_part}"]
+
+See chapter <<CHAPexpand>> for full coverage of string expansions. The quote
+operator can be used for all lookup types, but has no effect for single-key
+lookups, since no quoting is ever needed in their key strings.
+
+
+
+
+[[SECTdnsdb]]
+More about dnsdb
+~~~~~~~~~~~~~~~~
+cindex:[dnsdb lookup]
+cindex:[lookup,dnsdb]
+cindex:[DNS,as a lookup type]
+The ^dnsdb^ lookup type uses the DNS as its database. A simple query consists
+of a record type and a domain name, separated by an equals sign. For example,
+an expansion string could contain:
+
+ ${lookup dnsdb{mx=a.b.example}{$value}fail}
+
+The supported DNS record types are A, CNAME, MX, NS, PTR, SRV, and TXT, and,
+when Exim is compiled with IPv6 support, AAAA (and A6 if that is also
+configured). If no type is given, TXT is assumed. When the type is PTR,
+the data can be an IP address, written as normal; inversion and the addition of
+%in-addr.arpa% or %ip6.arpa% happens automatically. For example:
+
+ ${lookup dnsdb{ptr=192.168.4.5}{$value}fail}
+
+If the data for a PTR record is not a syntactically valid IP address, it is not
+altered and nothing is added.
+
+For any record type, if multiple records are found (or, for A6 lookups, if a
+single record leads to multiple addresses), the data is returned as a
+concatenation, with newline as the default separator. The order, of course,
+depends on the DNS resolver. You can specify a different separator character
+between multiple records by putting a right angle-bracket followed immediately
+by the new separator at the start of the query. For example:
+
+ ${lookup dnsdb{>: a=host1.example}}
+
+It is permitted to specify a space as the separator character. Further
+whitespace is ignored.
+
+cindex:[SRV record,in ^dnsdb^ lookup]
+For SRV records, the priority, weight, port, and host name are returned for
+each record, separated by spaces.
+
+cindex:[MX record,in ^dnsdb^ lookup]
+For MX records, both the preference value and the host name are returned for
+each record, separated by a space. However, if you want only host names, you
+can use the pseudo-type MXH:
+
+ ${lookup dnsdb{mxh=a.b.example}}
+
+In this case, the preference values are omitted.
+
+cindex:[name server,for enclosing domain]
+Another pseudo-type is ZNS (for ``zone NS''). It performs a lookup for NS
+records on the given domain, but if none are found, it removes the first
+component of the domain name, and tries again. This process continues until NS
+records are found or there are no more components left (or there is a DNS
+error). In other words, it may return the name servers for a top-level domain,
+but it never returns the root name servers. If there are no NS records for the
+top-level domain, the lookup fails. Consider these examples:
+
+ ${lookup dnsdb{zns=xxx.quercite.com}}
+ ${lookup dnsdb{zns=xxx.edu}}
+
+Assuming that in each case there are no NS records for the full domain name,
+the first returns the name servers for %quercite.com%, and the second returns
+the name servers for %edu%.
+
+You should be careful about how you use this lookup because, unless the
+top-level domain does not exist, the lookup always returns some host names. The
+sort of use to which this might be put is for seeing if the name servers for a
+given domain are on a blacklist. You can probably assume that the name servers
+for the high-level domains such as %com% or %co.uk% are not going to be on such
+a list.
+
+
+
+Multiple dnsdb lookups
+~~~~~~~~~~~~~~~~~~~~~~
+In the previous section, ^dnsdb^ lookups for a single domain are described.
+However, you can specify a list of domains or IP addresses in a single
+^dnsdb^ lookup. The list is specified in the normal Exim way, with colon as
+the default separator, but with the ability to change this. For example:
+
+ ${lookup dnsdb{one.domain.com:two.domain.com}}
+ ${lookup dnsdb{a=one.host.com:two.host.com}}
+ ${lookup dnsdb{ptr = <; 1.2.3.4 ; 4.5.6.8}}
+
+In order to retain backwards compatibility, there is one special case: if
+the lookup type is PTR and no change of separator is specified, Exim looks
+to see if the rest of the string is precisely one IPv6 address. In this
+case, it does not treat it as a list.
+
+The data from each lookup is concatenated, with newline separators by default,
+in the same way that multiple DNS records for a single item are handled. A
+different separator can be specified, as described above.
+
+The ^dnsdb^ lookup fails only if all the DNS lookups fail. If there is a
+temporary DNS error for any of them, the behaviour is controlled by
+an optional keyword followed by a comma that may appear before the record
+type. The possible keywords are ``defer_strict'', ``defer_never'', and
+``defer_lax''. With ``strict'' behaviour, any temporary DNS error causes the
+whole lookup to defer. With ``never'' behaviour, a temporary DNS error is
+ignored, and the behaviour is as if the DNS lookup failed to find anything.
+With ``lax'' behaviour, all the queries are attempted, but a temporary DNS
+error causes the whole lookup to defer only if none of the other lookups
+succeed. The default is ``lax'', so the following lookups are equivalent:
+
+ ${lookup dnsdb{defer_lax,a=one.host.com:two.host.com}}
+ ${lookup dnsdb{a=one.host.com:two.host.com}}
+
+Thus, in the default case, as long as at least one of the DNS lookups
+yields some data, the lookup succeeds.
+
+
+
+
+[[SECTldap]]
+More about LDAP
+~~~~~~~~~~~~~~~
+cindex:[LDAP lookup]
+cindex:[lookup,LDAP]
+cindex:[Solaris,LDAP]
+The original LDAP implementation came from the University of Michigan; this has
+become ``Open LDAP'', and there are now two different releases. Another
+implementation comes from Netscape, and Solaris 7 and subsequent releases
+contain inbuilt LDAP support. Unfortunately, though these are all compatible at
+the lookup function level, their error handling is different. For this reason
+it is necessary to set a compile-time variable when building Exim with LDAP, to
+indicate which LDAP library is in use. One of the following should appear in
+your _Local/Makefile_:
+
+ LDAP_LIB_TYPE=UMICHIGAN
+ LDAP_LIB_TYPE=OPENLDAP1
+ LDAP_LIB_TYPE=OPENLDAP2
+ LDAP_LIB_TYPE=NETSCAPE
+ LDAP_LIB_TYPE=SOLARIS
+
+If LDAP_LIB_TYPE is not set, Exim assumes `OPENLDAP1`, which has the
+same interface as the University of Michigan version.
+
+There are three LDAP lookup types in Exim. These behave slightly differently in
+the way they handle the results of a query:
+
+- ^ldap^ requires the result to contain just one entry; if there are more, it
+gives an error.
+
+- ^ldapdn^ also requires the result to contain just one entry, but it is the
+Distinguished Name that is returned rather than any attribute values.
+
+- ^ldapm^ permits the result to contain more than one entry; the attributes from
+all of them are returned.
+
+
+For ^ldap^ and ^ldapm^, if a query finds only entries with no attributes,
+Exim behaves as if the entry did not exist, and the lookup fails. The format of
+the data returned by a successful lookup is described in the next section.
+First we explain how LDAP queries are coded.
+
+
+[[SECTforldaque]]
+Format of LDAP queries
+~~~~~~~~~~~~~~~~~~~~~~
+cindex:[LDAP,query format]
+An LDAP query takes the form of a URL as defined in RFC 2255. For example, in
+the configuration of a ^redirect^ router one might have this setting:
+
+....
+data = ${lookup ldap \
+ {ldap:///cn=$local_part,o=University%20of%20Cambridge,\
+ c=UK?mailbox?base?}}
+....
+
+cindex:[LDAP,with TLS]
+The URL may begin with `ldap` or `ldaps` if your LDAP library supports
+secure (encrypted) LDAP connections. The second of these ensures that an
+encrypted TLS connection is used.
+
+
+LDAP quoting
+~~~~~~~~~~~~
+cindex:[LDAP,quoting]
+Two levels of quoting are required in LDAP queries, the first for LDAP itself
+and the second because the LDAP query is represented as a URL. Furthermore,
+within an LDAP query, two different kinds of quoting are required. For this
+reason, there are two different LDAP-specific quoting operators.
+
+The %quote_ldap% operator is designed for use on strings that are part of
+filter specifications. Conceptually, it first does the following conversions on
+the string:
+
+....
+* => \2A
+( => \28
+) => \29
+\ => \5C
+....
+
+in accordance with RFC 2254. The resulting string is then quoted according
+to the rules for URLs, that is, all characters except
+
+ ! $ ' - . _ ( ) * +
+
+are converted to their hex values, preceded by a percent sign. For example:
+
+ ${quote_ldap: a(bc)*, a<yz>; }
+
+yields
+
+ %20a%5C28bc%5C29%5C2A%2C%20a%3Cyz%3E%3B%20
+
+Removing the URL quoting, this is (with a leading and a trailing space):
+
+ a\28bc\29\2A, a<yz>;
+
+
+The %quote_ldap_dn% operator is designed for use on strings that are part of
+base DN specifications in queries. Conceptually, it first converts the string
+by inserting a backslash in front of any of the following characters:
+
+ , + " \ < > ;
+
+It also inserts a backslash before any leading spaces or # characters, and
+before any trailing spaces. (These rules are in RFC 2253.) The resulting string
+is then quoted according to the rules for URLs. For example:
+
+ ${quote_ldap_dn: a(bc)*, a<yz>; }
+
+yields
+
+ %5C%20a(bc)*%5C%2C%20a%5C%3Cyz%5C%3E%5C%3B%5C%20
+
+Removing the URL quoting, this is (with a trailing space):
+
+....
+\ a(bc)*\, a\<yz\>\;\
+....
+
+There are some further comments about quoting in the section on LDAP
+authentication below.
+
+
+LDAP connections
+~~~~~~~~~~~~~~~~
+cindex:[LDAP,connections]
+The connection to an LDAP server may either be over TCP/IP, or, when OpenLDAP
+is in use, via a Unix domain socket. The example given above does not specify
+an LDAP server. A server that is reached by TCP/IP can be specified in a query
+by starting it with
+
+ ldap://<hostname>:<port>/...
+
+If the port (and preceding colon) are omitted, the standard LDAP port (389) is
+used. When no server is specified in a query, a list of default servers is
+taken from the %ldap_default_servers% configuration option. This supplies a
+colon-separated list of servers which are tried in turn until one successfully
+handles a query, or there is a serious error. Successful handling either
+returns the requested data, or indicates that it does not exist. Serious errors
+are syntactical, or multiple values when only a single value is expected.
+Errors which cause the next server to be tried are connection failures, bind
+failures, and timeouts.
+
+For each server name in the list, a port number can be given. The standard way
+of specifing a host and port is to use a colon separator (RFC 1738). Because
+%ldap_default_servers% is a colon-separated list, such colons have to be
+doubled. For example
+
+ ldap_default_servers = ldap1.example.com::145:ldap2.example.com
+
+If %ldap_default_servers% is unset, a URL with no server name is passed
+to the LDAP library with no server name, and the library's default (normally
+the local host) is used.
+
+If you are using the OpenLDAP library, you can connect to an LDAP server using
+a Unix domain socket instead of a TCP/IP connection. This is specified by using
+`ldapi` instead of `ldap` in LDAP queries. What follows here applies only
+to OpenLDAP. If Exim is compiled with a different LDAP library, this feature is
+not available.
+
+For this type of connection, instead of a host name for the server, a pathname
+for the socket is required, and the port number is not relevant. The pathname
+can be specified either as an item in %ldap_default_servers%, or inline in
+the query. In the former case, you can have settings such as
+
+ ldap_default_servers = /tmp/ldap.sock : backup.ldap.your.domain
+
+When the pathname is given in the query, you have to escape the slashes as
+`%2F` to fit in with the LDAP URL syntax. For example:
+
+ ${lookup ldap {ldapi://%2Ftmp%2Fldap.sock/o=...
+
+When Exim processes an LDAP lookup and finds that the ``hostname'' is really
+a pathname, it uses the Unix domain socket code, even if the query actually
+specifies `ldap` or `ldaps`. In particular, no encryption is used for a
+socket connection. This behaviour means that you can use a setting of
+%ldap_default_servers% such as in the example above with traditional `ldap`
+or `ldaps` queries, and it will work. First, Exim tries a connection via
+the Unix domain socket; if that fails, it tries a TCP/IP connection to the
+backup host.
+
+If an explicit `ldapi` type is given in a query when a host name is
+specified, an error is diagnosed. However, if there are more items in
+%ldap_default_servers%, they are tried. In other words:
+
+- Using a pathname with `ldap` or `ldaps` forces the use of the Unix domain
+interface.
+
+- Using `ldapi` with a host name causes an error.
+
+
+Using `ldapi` with no host or path in the query, and no setting of
+%ldap_default_servers%, does whatever the library does by default.
+
+
+
+LDAP authentication and control information
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[LDAP,authentication]
+The LDAP URL syntax provides no way of passing authentication and other control
+information to the server. To make this possible, the URL in an LDAP query may
+be preceded by any number of ``<''name'>=<'value'>' settings, separated by
+spaces. If a value contains spaces it must be enclosed in double quotes, and
+when double quotes are used, backslash is interpreted in the usual way inside
+them. The following names are recognized:
+
+&&&
+`DEREFERENCE` set the dereferencing parameter
+`NETTIME ` set a timeout for a network operation
+`USER ` set the DN, for authenticating the LDAP bind
+`PASS ` set the password, likewise
+`SIZE ` set the limit for the number of entries returned
+`TIME ` set the maximum waiting time for a query
+&&&
+
+The value of the DEREFERENCE parameter must be one of the words ``never'',
+``searching'', ``finding'', or ``always''.
+
+The name CONNECT is an obsolete name for NETTIME, retained for
+backwards compatibility. This timeout (specified as a number of seconds) is
+enforced from the client end for operations that can be carried out over a
+network. Specifically, it applies to network connections and calls to the
+'ldap_result()' function. If the value is greater than zero, it is used if
+LDAP_OPT_NETWORK_TIMEOUT is defined in the LDAP headers (OpenLDAP), or
+if LDAP_X_OPT_CONNECT_TIMEOUT is defined in the LDAP headers (Netscape
+SDK 4.1). A value of zero forces an explicit setting of ``no timeout'' for
+Netscape SDK; for OpenLDAP no action is taken.
+
+The TIME parameter (also a number of seconds) is passed to the server to
+set a server-side limit on the time taken to complete a search.
+
+
+Here is an example of an LDAP query in an Exim lookup that uses some of these
+values. This is a single line, folded for ease of reading:
+
+ ${lookup ldap
+ {user="cn=manager,o=University of Cambridge,c=UK" pass=secret
+ ldap:///o=University%20of%20Cambridge,c=UK?sn?sub?(cn=foo)}
+ {$value}fail}
+
+The encoding of spaces as {pc}20 is a URL thing which should not be done for any
+of the auxiliary data. Exim configuration settings that include lookups which
+contain password information should be preceded by ``hide'' to prevent non-admin
+users from using the %-bP% option to see their values.
+
+The auxiliary data items may be given in any order. The default is no
+connection timeout (the system timeout is used), no user or password, no limit
+on the number of entries returned, and no time limit on queries.
+
+When a DN is quoted in the USER= setting for LDAP authentication, Exim
+removes any URL quoting that it may contain before passing it LDAP. Apparently
+some libraries do this for themselves, but some do not. Removing the URL
+quoting has two advantages:
+
+- It makes it possible to use the same %quote_ldap_dn% expansion for USER=
+DNs as with DNs inside actual queries.
+
+- It permits spaces inside USER= DNs.
+
+For example, a setting such as
+
+ USER=cn=${quote_ldap_dn:$1}
+
+should work even if $1$ contains spaces.
+
+Expanded data for the PASS= value should be quoted using the %quote%
+expansion operator, rather than the LDAP quote operators. The only reason this
+field needs quoting is to ensure that it conforms to the Exim syntax, which
+does not allow unquoted spaces. For example:
+
+ PASS=${quote:$3}
+
+
+The LDAP authentication mechanism can be used to check passwords as part of
+SMTP authentication. See the %ldapauth% expansion string condition in chapter
+<<CHAPexpand>>.
+
+
+
+Format of data returned by LDAP
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[LDAP,returned data formats]
+The ^ldapdn^ lookup type returns the Distinguished Name from a single entry as
+a sequence of values, for example
+
+ cn=manager, o=University of Cambridge, c=UK
+
+
+The ^ldap^ lookup type generates an error if more than one entry matches the
+search filter, whereas ^ldapm^ permits this case, and inserts a newline in
+the result between the data from different entries. It is possible for multiple
+values to be returned for both ^ldap^ and ^ldapm^, but in the former case
+you know that whatever values are returned all came from a single entry in the
+directory.
+
+In the common case where you specify a single attribute in your LDAP query, the
+result is not quoted, and does not contain the attribute name. If the attribute
+has multiple values, they are separated by commas.
+
+If you specify multiple attributes, the result contains space-separated, quoted
+strings, each preceded by the attribute name and an equals sign. Within the
+quotes, the quote character, backslash, and newline are escaped with
+backslashes, and commas are used to separate multiple values for the attribute.
+Apart from the escaping, the string within quotes takes the same form as the
+output when a single attribute is requested. Specifying no attributes is the
+same as specifying all of an entry's attributes.
+
+Here are some examples of the output format. The first line of each pair is an
+LDAP query, and the second is the data that is returned. The attribute called
+%attr1% has two values, whereas %attr2% has only one value:
+
+ ldap:///o=base?attr1?sub?(uid=fred)
+ value1.1, value1.2
+
+ ldap:///o=base?attr2?sub?(uid=fred)
+ value two
+
+ ldap:///o=base?attr1,attr2?sub?(uid=fred)
+ attr1="value1.1, value1.2" attr2="value two"
+
+ ldap:///o=base??sub?(uid=fred)
+ objectClass="top" attr1="value1.1, value1.2" attr2="value two"
+
+The %extract% operator in string expansions can be used to pick out individual
+fields from data that consists of 'key'='value' pairs. You can make use
+of Exim's %-be% option to run expansion tests and thereby check the results of
+LDAP lookups.
+
+
+
+
+[[SECTnisplus]]
+More about NIS+
+~~~~~~~~~~~~~~~
+cindex:[NIS+ lookup type]
+cindex:[lookup,NIS+]
+NIS+ queries consist of a NIS+ 'indexed name' followed by an optional colon
+and field name. If this is given, the result of a successful query is the
+contents of the named field; otherwise the result consists of a concatenation
+of 'field-name=field-value' pairs, separated by spaces. Empty values and
+values containing spaces are quoted. For example, the query
+
+ [name=mg1456],passwd.org_dir
+
+might return the string
+
+ name=mg1456 passwd="" uid=999 gid=999 gcos="Martin Guerre"
+ home=/home/mg1456 shell=/bin/bash shadow=""
+
+(split over two lines here to fit on the page), whereas
+
+ [name=mg1456],passwd.org_dir:gcos
+
+would just return
+
+ Martin Guerre
+
+with no quotes. A NIS+ lookup fails if NIS+ returns more than one table entry
+for the given indexed key. The effect of the %quote_nisplus% expansion
+operator is to double any quote characters within the text.
+
+
+
+[[SECTsql]]
+More about MySQL, PostgreSQL, Oracle, and Interbase
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[MySQL,lookup type]
+cindex:[PostgreSQL lookup type]
+cindex:[lookup,MySQL]
+cindex:[lookup,PostgreSQL]
+cindex:[Oracle,lookup type]
+cindex:[lookup,Oracle]
+cindex:[Interbase lookup type]
+cindex:[lookup,Interbase]
+If any MySQL, PostgreSQL, Oracle, or Interbase lookups are used, the
+%mysql_servers%, %pgsql_servers%, %oracle_servers%, or %ibase_servers%
+option (as appropriate) must be set to a colon-separated list of server
+information. Each item in the list is a slash-separated list of four items:
+host name, database name, user name, and password. In the case of Oracle, the
+host name field is used for the ``service name'', and the database name field is
+not used and should be empty. For example:
+
+ hide oracle_servers = oracle.plc.example//ph10/abcdwxyz
+
+Because password data is sensitive, you should always precede the setting with
+``hide'', to prevent non-admin users from obtaining the setting via the %-bP%
+option. Here is an example where two MySQL servers are listed:
+
+....
+hide mysql_servers = localhost/users/root/secret:\
+ otherhost/users/root/othersecret
+....
+
+For MySQL and PostgreSQL, a host may be specified as <'name'>:<'port'> but
+because this is a colon-separated list, the colon has to be doubled.
+
+For each query, these parameter groups are tried in order until a connection
+and a query succeeds. Queries for these databases are SQL statements, so an
+example might be
+
+....
+${lookup mysql{select mailbox from users where id='ph10'}\
+ {$value}fail}
+....
+
+If the result of the query contains more than one field, the data for
+each field in the row is returned, preceded by its name, so the result
+of
+
+....
+${lookup pgsql{select home,name from users where id='ph10'}\
+ {$value}}
+....
+
+might be
+
+ home=/home/ph10 name="Philip Hazel"
+
+Values containing spaces and empty values are double quoted, with embedded
+quotes escaped by a backslash.
+
+If the result of the query contains just one field, the value is passed back
+verbatim, without a field name, for example:
+
+ Philip Hazel
+
+If the result of the query yields more than one row, it is all concatenated,
+with a newline between the data for each row.
+
+The %quote_mysql%, %quote_pgsql%, and %quote_oracle% expansion operators
+convert newline, tab, carriage return, and backspace to \n, \t, \r, and \b
+respectively, and the characters single-quote, double-quote, and backslash
+itself are escaped with backslashes. The %quote_pgsql% expansion operator, in
+addition, escapes the percent and underscore characters. This cannot be done
+for MySQL because these escapes are not recognized in contexts where these
+characters are not special.
+
+
+
+Special MySQL features
+~~~~~~~~~~~~~~~~~~~~~~
+For MySQL, an empty host name or the use of ``localhost'' in %mysql_servers%
+causes a connection to the server on the local host by means of a Unix domain
+socket. An alternate socket can be specified in parentheses. The full syntax of
+each item in %mysql_servers% is:
+
+&&&
+<'hostname'>::<'port'>(<'socket name'>)/<'database'>/<'user'>/<'password'>
+&&&
+
+Any of the three sub-parts of the first field can be omitted. For normal use on
+the local host it can be left blank or set to just ``localhost''.
+
+No database need be supplied -- but if it is absent here, it must be given in
+the queries.
+
+If a MySQL query is issued that does not request any data (an insert, update,
+or delete command), the result of the lookup is the number of rows affected.
+
+*Warning*: this can be misleading. If an update does not actually change
+anything (for example, setting a field to the value it already has), the result
+is zero because no rows are affected.
+
+
+
+
+Special PostgreSQL features
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+PostgreSQL lookups can also use Unix domain socket connections to the database.
+This is usually faster and costs less CPU time than a TCP/IP connection.
+However it can be used only if the mail server runs on the same machine as the
+database server. A configuration line for PostgreSQL via Unix domain sockets
+looks like this:
+
+ hide pgsql_servers = (/tmp/.s.PGSQL.5432)/db/user/password : ...
+
+In other words, instead of supplying a host name, a path to the socket is
+given. The path name is enclosed in parentheses so that its slashes aren't
+visually confused with the delimiters for the other server parameters.
+
+If a PostgreSQL query is issued that does not request any data (an insert,
+update, or delete command), the result of the lookup is the number of rows
+affected.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPdomhosaddlists]]
+[titleabbrev="Domain, host, and address lists"]
+Domain, host, address, and local part lists
+-------------------------------------------
+cindex:[list of domains; hosts; etc.]
+A number of Exim configuration options contain lists of domains, hosts,
+email addresses, or local parts. For example, the %hold_domains% option
+contains a list of domains whose delivery is currently suspended. These lists
+are also used as data in ACL statements (see chapter <<CHAPACL>>).
+
+Each item in one of these lists is a pattern to be matched against a domain,
+host, email address, or local part, respectively. In the sections below, the
+different types of pattern for each case are described, but first we cover some
+general facilities that apply to all four kinds of list.
+
+
+
+Expansion of lists
+~~~~~~~~~~~~~~~~~~
+cindex:[expansion,of lists]
+Each list is expanded as a single string before it is used. The result of
+expansion must be a list, possibly containing empty items, which is split up
+into separate items for matching. By default, colon is the separator character,
+but this can be varied if necessary. See sections <<SECTlistconstruct>> and
+<<SECTempitelis>> for details of the list syntax; the second of these discusses
+the way you specify empty list items.
+
+
+If the string expansion is forced to fail, Exim behaves as if the item it is
+testing (domain, host, address, or local part) is not in the list. Other
+expansion failures cause temporary errors.
+
+If an item in a list is a regular expression, backslashes, dollars and possibly
+other special characters in the expression must be protected against
+misinterpretation by the string expander. The easiest way to do this is to use
+the `\N` expansion feature to indicate that the contents of the regular
+expression should not be expanded. For example, in an ACL you might have:
+
+....
+deny senders = \N^\d{8}\w@.*\.baddomain\.example$\N : \
+ ${lookup{$domain}lsearch{/badsenders/bydomain}}
+....
+
+The first item is a regular expression that is protected from expansion by
+`\N`, whereas the second uses the expansion to obtain a list of unwanted
+senders based on the receiving domain.
+
+
+
+
+Negated items in lists
+~~~~~~~~~~~~~~~~~~~~~~
+cindex:[list,negation]
+cindex:[negation in lists]
+Items in a list may be positive or negative. Negative items are indicated by a
+leading exclamation mark, which may be followed by optional white space. A list
+defines a set of items (domains, etc). When Exim processes one of these lists,
+it is trying to find out whether a domain, host, address, or local part
+(respectively) is in the set that is defined by the list. It works like this:
+
+The list is scanned from left to right. If a positive item is matched, the
+subject that is being checked is in the set; if a negative item is matched, the
+subject is not in the set. If the end of the list is reached without the
+subject having matched any of the patterns, it is in the set if the last item
+was a negative one, but not if it was a positive one. For example, the list in
+
+ domainlist relay_domains = !a.b.c : *.b.c
+
+matches any domain ending in '.b.c' except for 'a.b.c'. Domains that match
+neither 'a.b.c' nor '*.b.c' do not match, because the last item in the
+list is positive. However, if the setting were
+
+ domainlist relay_domains = !a.b.c
+
+then all domains other than 'a.b.c' would match because the last item in the
+list is negative. In other words, a list that ends with a negative item behaves
+as if it had an extra item `:*` on the end.
+
+Another way of thinking about positive and negative items in lists is to read
+the connector as ``or'' after a positive item and as ``and'' after a negative
+item.
+
+
+
+[[SECTfilnamlis]]
+File names in lists
+~~~~~~~~~~~~~~~~~~~
+cindex:[list,file name in]
+If an item in a domain, host, address, or local part list is an absolute file
+name (beginning with a slash character), each line of the file is read and
+processed as if it were an independent item in the list, except that further
+file names are not allowed,
+and no expansion of the data from the file takes place.
+Empty lines in the file are ignored, and the file may also contain comment
+lines:
+
+- For domain and host lists, if a # character appears anywhere in a line of the
+file, it and all following characters are ignored.
+
+- Because local parts may legitimately contain # characters, a comment in an
+address list or local part list file is recognized only if # is preceded by
+white space or the start of the line. For example:
+
+ not#comment@x.y.z # but this is a comment
+
+Putting a file name in a list has the same effect as inserting each line of the
+file as an item in the list (blank lines and comments excepted). However, there
+is one important difference: the file is read each time the list is processed,
+so if its contents vary over time, Exim's behaviour changes.
+
+If a file name is preceded by an exclamation mark, the sense of any match
+within the file is inverted. For example, if
+
+ hold_domains = !/etc/nohold-domains
+
+and the file contains the lines
+
+ !a.b.c
+ *.b.c
+
+then 'a.b.c' is in the set of domains defined by %hold_domains%, whereas any
+domain matching `*.b.c` is not.
+
+
+
+An lsearch file is not an out-of-line list
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+As will be described in the sections that follow, lookups can be used in lists
+to provide indexed methods of checking list membership. There has been some
+confusion about the way ^lsearch^ lookups work in lists. Because
+an ^lsearch^ file contains plain text and is scanned sequentially, it is
+sometimes thought that it is allowed to contain wild cards and other kinds of
+non-constant pattern. This is not the case. The keys in an ^lsearch^ file are
+always fixed strings, just as for any other single-key lookup type.
+
+If you want to use a file to contain wild-card patterns that form part of a
+list, just give the file name on its own, without a search type, as described
+in the previous section.
+
+
+
+
+[[SECTnamedlists]]
+Named lists
+~~~~~~~~~~~
+cindex:[named lists]
+cindex:[list,named]
+A list of domains, hosts, email addresses, or local parts can be given a name
+which is then used to refer to the list elsewhere in the configuration. This is
+particularly convenient if the same list is required in several different
+places. It also allows lists to be given meaningful names, which can improve
+the readability of the configuration. For example, it is conventional to define
+a domain list called 'local_domains' for all the domains that are handled
+locally on a host, using a configuration line such as
+
+ domainlist local_domains = localhost:my.dom.example
+
+Named lists are referenced by giving their name preceded by a plus sign, so,
+for example, a router that is intended to handle local domains would be
+configured with the line
+
+ domains = +local_domains
+
+The first router in a configuration is often one that handles all domains
+except the local ones, using a configuration with a negated item like this:
+
+ dnslookup:
+ driver = dnslookup
+ domains = ! +local_domains
+ transport = remote_smtp
+ no_more
+
+The four kinds of named list are created by configuration lines starting with
+the words %domainlist%, %hostlist%, %addresslist%, or %localpartlist%,
+respectively. Then there follows the name that you are defining, followed by an
+equals sign and the list itself. For example:
+
+ hostlist relay_hosts = 192.168.23.0/24 : my.friend.example
+ addresslist bad_senders = cdb;/etc/badsenders
+
+A named list may refer to other named lists:
+
+ domainlist dom1 = first.example : second.example
+ domainlist dom2 = +dom1 : third.example
+ domainlist dom3 = fourth.example : +dom2 : fifth.example
+
+
+*Warning*: If the last item in a referenced list is a negative one, the
+effect may not be what you intended, because the negation does not propagate
+out to the higher level. For example, consider:
+
+ domainlist dom1 = !a.b
+ domainlist dom2 = +dom1 : *.b
+
+The second list specifies ``either in the %dom1% list or '*.b'##''. The first
+list specifies just ``not 'a.b'##'', so the domain 'x.y' matches it. That means
+it matches the second list as well. The effect is not the same as
+
+ domainlist dom2 = !a.b : *.b
+
+where 'x.y' does not match. It's best to avoid negation altogether in
+referenced lists if you can.
+
+Named lists may have a performance advantage. When Exim is routing an
+address or checking an incoming message, it caches the result of tests on named
+lists. So, if you have a setting such as
+
+ domains = +local_domains
+
+on several of your routers
+or in several ACL statements,
+the actual test is done only for the first one. However, the caching works only
+if there are no expansions within the list itself or any sublists that it
+references. In other words, caching happens only for lists that are known to be
+the same each time they are referenced.
+
+By default, there may be up to 16 named lists of each type. This limit can be
+extended by changing a compile-time variable. The use of domain and host lists
+is recommended for concepts such as local domains, relay domains, and relay
+hosts. The default configuration is set up like this.
+
+
+
+Named lists compared with macros
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[list,named compared with macro]
+cindex:[macro,compared with named list]
+At first sight, named lists might seem to be no different from macros in the
+configuration file. However, macros are just textual substitutions. If you
+write
+
+ ALIST = host1 : host2
+ auth_advertise_hosts = !ALIST
+
+it probably won't do what you want, because that is exactly the same as
+
+ auth_advertise_hosts = !host1 : host2
+
+Notice that the second host name is not negated. However, if you use a host
+list, and write
+
+ hostlist alist = host1 : host2
+ auth_advertise_hosts = ! +alist
+
+the negation applies to the whole list, and so that is equivalent to
+
+ auth_advertise_hosts = !host1 : !host2
+
+
+
+
+Named list caching
+~~~~~~~~~~~~~~~~~~
+cindex:[list,caching of named]
+cindex:[caching,named lists]
+While processing a message, Exim caches the result of checking a named list if
+it is sure that the list is the same each time. In practice, this means that
+the cache operates only if the list contains no \$ characters, which guarantees
+that it will not change when it is expanded. Sometimes, however, you may have
+an expanded list that you know will be the same each time within a given
+message. For example:
+
+....
+domainlist special_domains = \
+ ${lookup{$sender_host_address}cdb{/some/file}}
+....
+
+This provides a list of domains that depends only on the sending host's IP
+address. If this domain list is referenced a number of times (for example,
+in several ACL lines, or in several routers) the result of the check is not
+cached by default, because Exim does not know that it is going to be the
+same list each time.
+
+By appending `_cache` to `domainlist` you can tell Exim to go ahead and
+cache the result anyway. For example:
+
+ domainlist_cache special_domains = ${lookup{...
+
+If you do this, you should be absolutely sure that caching is going to do
+the right thing in all cases. When in doubt, leave it out.
+
+
+
+[[SECTdomainlist]]
+Domain lists
+~~~~~~~~~~~~
+cindex:[domain list,patterns for]
+cindex:[list,domain list]
+Domain lists contain patterns that are to be matched against a mail domain.
+The following types of item may appear in domain lists:
+
+- cindex:[primary host name]
+cindex:[host name, matched in domain list]
+cindex:[%primary_hostname%]
+cindex:[domain list,matching primary host name]
+cindex:[@ in a domain list]
+If a pattern consists of a single @ character, it matches the local host name,
+as set by the %primary_hostname% option (or defaulted). This makes it possible
+to use the same configuration file on several different hosts that differ only
+in their names.
+
+- cindex:[@{bk} in a domain list]
+cindex:[domain list,matching local IP interfaces]
+cindex:[domain literal]
+If a pattern consists of the string `@[]` it matches any local IP interface
+address, enclosed in square brackets, as in an email address that contains a
+domain literal.
+In today's Internet, the use of domain literals is controversial.
+
+- cindex:[@mx_any]
+cindex:[@mx_primary]
+cindex:[@mx_secondary]
+cindex:[domain list,matching MX pointers to local host]
+If a pattern consists of the string `@mx_any` it matches any domain that
+has an MX record pointing to the local host or to any host that is listed in
+cindex:[%hosts_treat_as_local%]
+%hosts_treat_as_local%. The items `@mx_primary` and `@mx_secondary`
+are similar, except that the first matches only when a primary MX target is the
+local host, and the second only when no primary MX target is the local host,
+but a secondary MX target is. ``Primary'' means an MX record with the lowest
+preference value -- there may of course be more than one of them.
++
+The MX lookup that takes place when matching a pattern of this type is
+performed with the resolver options for widening names turned off. Thus, for
+example, a single-component domain will 'not' be expanded by adding the
+resolver's default domain. See the %qualify_single% and %search_parents%
+options of the ^dnslookup^ router for a discussion of domain widening.
++
+Sometimes you may want to ignore certain IP addresses when using one of these
+patterns. You can specify this by following the pattern with `/ignore=`<'ip
+list'>, where <'ip list'> is a list of IP addresses. These addresses are
+ignored when processing the pattern (compare the %ignore_target_hosts% option
+on a router). For example:
+
+ domains = @mx_any/ignore=127.0.0.1
++
+This example matches any domain that has an MX record pointing to one of
+the local host's IP addresses other than 127.0.0.1.
++
+The list of IP addresses is in fact processed by the same code that processes
+host lists, so it may contain CIDR-coded network specifications and it may also
+contain negative items.
++
+Because the list of IP addresses is a sublist within a domain list, you have to
+be careful about delimiters if there is more than one address. Like any other
+list, the default delimiter can be changed. Thus, you might have:
++
+....
+domains = @mx_any/ignore=<;127.0.0.1;0.0.0.0 : \
+ an.other.domain : ...
+....
++
+so that the sublist uses semicolons for delimiters. When IPv6 addresses are
+involved, it is easiest to change the delimiter for the main list as well:
++
+....
+domains = <? @mx_any/ignore=<;127.0.0.1;::1 ? \
+ an.other.domain ? ...
+....
+
+- cindex:[asterisk,in domain list]
+cindex:[domain list,asterisk in]
+cindex:[domain list,matching ``ends with'']
+If a pattern starts with an asterisk, the remaining characters of the pattern
+are compared with the terminating characters of the domain. The use of ``\*'' in
+domain lists differs from its use in partial matching lookups. In a domain
+list, the character following the asterisk need not be a dot, whereas partial
+matching works only in terms of dot-separated components. For example, a domain
+list item such as `*key.ex` matches 'donkey.ex' as well as
+'cipher.key.ex'.
+
+- cindex:[regular expressions,in domain list]
+cindex:[domain list,matching regular expression]
+If a pattern starts with a circumflex character, it is treated as a regular
+expression, and matched against the domain using a regular expression matching
+function. The circumflex is treated as part of the regular expression.
+References to descriptions of the syntax of regular expressions are given in
+chapter <<CHAPregexp>>.
++
+*Warning*: Because domain lists are expanded before being processed, you
+must escape any backslash and dollar characters in the regular expression, or
+use the special `\N` sequence (see chapter <<CHAPexpand>>) to specify that it
+is not to be expanded (unless you really do want to build a regular expression
+by expansion, of course).
+
+- cindex:[lookup,in domain list]
+cindex:[domain list,matching by lookup]
+If a pattern starts with the name of a single-key lookup type followed by a
+semicolon (for example, ``dbm;'' or ``lsearch;''), the remainder of the pattern
+must be a file name in a suitable format for the lookup type. For example, for
+``cdb;'' it must be an absolute path:
+
+ domains = cdb;/etc/mail/local_domains.cdb
++
+The appropriate type of lookup is done on the file using the domain name as the
+key. In most cases, the data that is looked up is not used; Exim is interested
+only in whether or not the key is present in the file. However, when a lookup
+is used for the %domains% option on a router
+or a %domains% condition in an ACL statement, the data is preserved in the
+$domain_data$ variable and can be referred to in other router options or
+other statements in the same ACL.
+
+- Any of the single-key lookup type names may be preceded by ``partial<''n'>-',
+where the <'n'> is optional, for example,
+
+ domains = partial-dbm;/partial/domains
++
+This causes partial matching logic to be invoked; a description of how this
+works is given in section <<SECTpartiallookup>>.
+
+- cindex:[asterisk,in lookup type]
+Any of the single-key lookup types may be followed by an asterisk. This causes
+a default lookup for a key consisting of a single asterisk to be done if the
+original lookup fails. This is not a useful feature when using a domain list to
+select particular domains (because any domain would match), but it might have
+value if the result of the lookup is being used via the $domain_data$
+expansion variable.
+
+- If the pattern starts with the name of a query-style lookup type followed by a
+semicolon (for example, ``nisplus;'' or ``ldap;''), the remainder of the pattern
+must be an appropriate query for the lookup type, as described in chapter
+<<CHAPfdlookup>>. For example:
++
+....
+hold_domains = mysql;select domain from holdlist \
+ where domain = '$domain';
+....
++
+In most cases, the data that is looked up is not used (so for an SQL query, for
+example, it doesn't matter what field you select). Exim is interested only in
+whether or not the query succeeds. However, when a lookup is used for the
+%domains% option on a router, the data is preserved in the $domain_data$
+variable and can be referred to in other options.
+
+- cindex:[domain list,matching literal domain name]
+If none of the above cases apply, a caseless textual comparison is made
+between the pattern and the domain.
+
+
+Here is an example that uses several different kinds of pattern:
+
+....
+domainlist funny_domains = \
+ @ : \
+ lib.unseen.edu : \
+ *.foundation.fict.example : \
+ \N^[1-2]\d{3}\.fict\.example$\N : \
+ partial-dbm;/opt/data/penguin/book : \
+ nis;domains.byname : \
+ nisplus;[name=$domain,status=local],domains.org_dir
+....
+
+There are obvious processing trade-offs among the various matching modes. Using
+an asterisk is faster than a regular expression, and listing a few names
+explicitly probably is too. The use of a file or database lookup is expensive,
+but may be the only option if hundreds of names are required. Because the
+patterns are tested in order, it makes sense to put the most commonly matched
+patterns earlier.
+
+
+
+[[SECThostlist]]
+Host lists
+~~~~~~~~~~
+cindex:[host list,patterns in]
+cindex:[list,host list]
+Host lists are used to control what remote hosts are allowed to do. For
+example, some hosts may be allowed to use the local host as a relay, and some
+may be permitted to use the SMTP ETRN command. Hosts can be identified in
+two different ways, by name or by IP address. In a host list, some types of
+pattern are matched to a host name, and some are matched to an IP address.
+You need to be particularly careful with this when single-key lookups are
+involved, to ensure that the right value is being used as the key.
+
+
+Special host list patterns
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[empty item in hosts list]
+cindex:[host list,empty string in]
+If a host list item is the empty string, it matches only when no remote host is
+involved. This is the case when a message is being received from a local
+process using SMTP on the standard input, that is, when a TCP/IP connection is
+not used.
+
+cindex:[asterisk,in host list]
+The special pattern ``\*'' in a host list matches any host or no host. Neither
+the IP address nor the name is actually inspected.
+
+
+
+[[SECThoslispatip]]
+Host list patterns that match by IP address
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host list,matching IP addresses]
+If an IPv4 host calls an IPv6 host and the call is accepted on an IPv6 socket,
+the incoming address actually appears in the IPv6 host as
+``::`ffff`:<''v4address'>'. When such an address is tested against a host
+list, it is converted into a traditional IPv4 address first. (Not all operating
+systems accept IPv4 calls on IPv6 sockets, as there have been some security
+concerns.)
+
+The following types of pattern in a host list check the remote host by
+inspecting its IP address:
+
+- If the pattern is a plain domain name (not a regular expression, not starting
+with \*, not a lookup of any kind), Exim calls the operating system function
+to find the associated IP address(es). Exim uses the newer
+'getipnodebyname()' function when available, otherwise 'gethostbyname()'.
+This typically causes a forward DNS lookup of the name. The result is compared
+with the IP address of the subject host.
++
+If there is a temporary problem (such as a DNS timeout) with the host name
+lookup, a temporary error occurs. For example, if the list is being used in an
+ACL condition, the ACL gives a ``defer'' response, usually leading to a temporary
+SMTP error code. If no IP address can be found for the host name, what happens
+is described in section <<SECTbehipnot>> below.
+
+- cindex:[@ in a host list]
+If the pattern is ``@'', the primary host name is substituted and used as a
+domain name, as just described.
+
+- If the pattern is an IP address, it is matched against the IP address of the
+subject host. IPv4 addresses are given in the normal ``dotted-quad'' notation.
+IPv6 addresses can be given in colon-separated format, but the colons have to
+be doubled so as not to be taken as item separators when the default list
+separator is used. IPv6 addresses are recognized even when Exim is compiled
+without IPv6 support. This means that if they appear in a host list on an
+IPv4-only host, Exim will not treat them as host names. They are just addresses
+that can never match a client host.
+
+- cindex:[@{bk} in a host list]
+If the pattern is ``@[]'', it matches the IP address of any IP interface on
+the local host. For example, if the local host is an IPv4 host with one
+interface address 10.45.23.56, these two ACL statements have the same effect:
+
+ accept hosts = 127.0.0.1 : 10.45.23.56
+ accept hosts = @[]
+
+- cindex:[CIDR notation]
+If the pattern is an IP address followed by a slash and a mask length (for
+example 10.11.42.0/24), it is matched against the IP address of the subject
+host under the given mask. This allows, an entire network of hosts to be
+included (or excluded) by a single item. The mask uses CIDR notation; it
+specifies the number of address bits that must match, starting from the most
+significant end of the address.
++
+*Note*: the mask is 'not' a count of addresses, nor is it the high number
+of a range of addresses. It is the number of bits in the network portion of the
+address. The above example specifies a 24-bit netmask, so it matches all 256
+addresses in the 10.11.42.0 network. An item such as
+
+ 192.168.23.236/31
++
+matches just two addresses, 192.168.23.236 and 192.168.23.237. A mask value of
+32 for an IPv4 address is the same as no mask at all; just a single address
+matches.
++
+Here is another example which shows an IPv4 and an IPv6 network:
++
+....
+recipient_unqualified_hosts = 192.168.0.0/16: \
+ 3ffe::ffff::836f::::/48
+....
++
+The doubling of list separator characters applies only when these items
+appear inline in a host list. It is not required when indirecting via a file.
+For example,
+
+ recipient_unqualified_hosts = /opt/exim/unqualnets
++
+could make use of a file containing
+
+ 172.16.0.0/12
+ 3ffe:ffff:836f::/48
++
+to have exactly the same effect as the previous example. When listing IPv6
+addresses inline, it is usually more convenient to use the facility for
+changing separator characters. This list contains the same two networks:
++
+....
+recipient_unqualified_hosts = <; 172.16.0.0/12; \
+ 3ffe:ffff:836f::/48
+....
++
+The separator is changed to semicolon by the leading ``<;'' at the start of the
+list.
+
+
+
+
+[[SECThoslispatsikey]]
+Host list patterns for single-key lookups by host address
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host list,lookup of IP address]
+When a host is to be identified by a single-key lookup of its complete IP
+address, the pattern takes this form:
+
+ net-<single-key-search-type>;<search-data>
+
+For example:
+
+ hosts_lookup = net-cdb;/hosts-by-ip.db
+
+The text form of the IP address of the subject host is used as the lookup key.
+IPv6 addresses are converted to an unabbreviated form, using lower case
+letters, with dots as separators because colon is the key terminator in
+^lsearch^ files. [Colons can in fact be used in keys in ^lsearch^ files by
+quoting the keys, but this is a facility that was added later.] The data
+returned by the lookup is not used.
+
+cindex:[IP address,masking]
+cindex:[host list,masked IP address]
+Single-key lookups can also be performed using masked IP addresses, using
+patterns of this form:
+
+ net<number>-<single-key-search-type>;<search-data>
+
+For example:
+
+ net24-dbm;/networks.db
+
+The IP address of the subject host is masked using <'number'> as the mask
+length. A textual string is constructed from the masked value, followed by the
+mask, and this is used as the lookup key. For example, if the host's IP address
+is 192.168.34.6, the key that is looked up for the above example is
+``192.168.34.0/24''. IPv6 addresses are converted to a text value using lower
+case letters and dots as separators instead of the more usual colon, because
+colon is the key terminator in ^lsearch^ files. Full, unabbreviated IPv6
+addresses are always used.
+
+*Warning*: Specifing %net32-% (for an IPv4 address) or %net128-% (for an
+IPv6 address) is not the same as specifing just %net-% without a number. In
+the former case the key strings include the mask value, whereas in the latter
+case the IP address is used on its own.
+
+
+
+[[SECThoslispatnam]]
+Host list patterns that match by host name
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host,lookup failures]
+cindex:[unknown host name]
+cindex:[host list,matching host name]
+There are several types of pattern that require Exim to know the name of the
+remote host. These are either wildcard patterns or lookups by name. (If a
+complete hostname is given without any wildcarding, it is used to find an IP
+address to match against, as described in the section <<SECThoslispatip>> above.)
+
+If the remote host name is not already known when Exim encounters one of these
+patterns, it has to be found from the IP address.
+Although many sites on the Internet are conscientious about maintaining reverse
+DNS data for their hosts, there are also many that do not do this.
+Consequently, a name cannot always be found, and this may lead to unwanted
+effects. Take care when configuring host lists with wildcarded name patterns.
+Consider what will happen if a name cannot be found.
+
+Because of the problems of determining host names from IP addresses, matching
+against host names is not as common as matching against IP addresses.
+
+By default, in order to find a host name, Exim first does a reverse DNS lookup;
+if no name is found in the DNS, the system function ('gethostbyaddr()' or
+'getipnodebyaddr()' if available) is tried. The order in which these lookups
+are done can be changed by setting the %host_lookup_order% option.
+
+There are some options that control what happens if a host name cannot be
+found. These are described in section <<SECTbehipnot>> below.
+
+cindex:[host,alias for]
+cindex:[alias for host]
+As a result of aliasing, hosts may have more than one name. When processing any
+of the following types of pattern, all the host's names are checked:
+
+- cindex:[asterisk,in host list]
+If a pattern starts with ``\*'' the remainder of the item must match the end of
+the host name. For example, `*.b.c` matches all hosts whose names end in
+'.b.c'. This special simple form is provided because this is a very common
+requirement. Other kinds of wildcarding require the use of a regular
+expression.
+
+- cindex:[regular expressions,in host list]
+cindex:[host list,regular expression in]
+If the item starts with ``^'' it is taken to be a regular expression which is
+matched against the host name. For example,
+
+ ^(a|b)\.c\.d$
++
+is a regular expression that matches either of the two hosts 'a.c.d' or
+'b.c.d'. When a regular expression is used in a host list, you must take care
+that backslash and dollar characters are not misinterpreted as part of the
+string expansion. The simplest way to do this is to use `\N` to mark that
+part of the string as non-expandable. For example:
+
+ sender_unqualified_hosts = \N^(a|b)\.c\.d$\N : ....
++
+*Warning*: If you want to match a complete host name, you must include the
+`\$` terminating metacharacter in the regular expression, as in the above
+example. Without it, a match at the start of the host name is all that is
+required.
+
+
+
+
+[[SECTbehipnot]]
+Behaviour when an IP address or name cannot be found
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host,lookup failures]
+While processing a host list, Exim may need to look up an IP address from a
+name (see section <<SECThoslispatip>>), or it may need to look up a host name
+from an IP address (see section <<SECThoslispatnam>>). In either case, the
+behaviour when it fails to find the information it is seeking is the same.
+
+cindex:[`+include_unknown`]
+cindex:[`+ignore_unknown`]
+By default, Exim behaves as if the host does not match the list. This may not
+always be what you want to happen. To change Exim's behaviour, the special
+items `+include_unknown` or `+ignore_unknown` may appear in the list (at
+top level -- they are not recognized in an indirected file).
+
+- If any item that follows `+include_unknown` requires information that
+cannot found, Exim behaves as if the host does match the list. For example,
+
+ host_reject_connection = +include_unknown:*.enemy.ex
++
+rejects connections from any host whose name matches `*.enemy.ex`, and also
+any hosts whose name it cannot find.
+
+- If any item that follows `+ignore_unknown` requires information that cannot
+be found, Exim ignores that item and proceeds to the rest of the list. For
+example:
++
+....
+accept hosts = +ignore_unknown : friend.example : \
+ 192.168.4.5
+....
++
+accepts from any host whose name is 'friend.example' and from 192.168.4.5,
+whether or not its host name can be found. Without `+ignore_unknown`, if no
+name can be found for 192.168.4.5, it is rejected.
+
+Both `+include_unknown` and `+ignore_unknown` may appear in the same
+list. The effect of each one lasts until the next, or until the end of the
+list.
+
+*Note*: This section applies to permanent lookup failures. It does 'not'
+apply to temporary DNS errors. They always cause a defer action.
+
+
+
+[[SECThoslispatnamsk]]
+Host list patterns for single-key lookups by host name
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host,lookup failures]
+cindex:[unknown host name]
+cindex:[host list,matching host name]
+If a pattern is of the form
+
+ <single-key-search-type>;<search-data>
+
+for example
+
+ dbm;/host/accept/list
+
+a single-key lookup is performend, using the host name as its key. If the
+lookup succeeds, the host matches the item. The actual data that is looked up
+is not used.
+
+*Reminder*: With this kind of pattern, you must have host 'names' as
+keys in the file, not IP addresses. If you want to do lookups based on IP
+addresses, you must precede the search type with ``net-'' (see section
+<<SECThoslispatsikey>>). There is, however, no reason why you could not use two
+items in the same list, one doing an address lookup and one doing a name
+lookup, both using the same file.
+
+
+
+Host list patterns for query-style lookups
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+If a pattern is of the form
+
+ <query-style-search-type>;<query>
+
+the query is obeyed, and if it succeeds, the host matches the item. The actual
+data that is looked up is not used. The variables $sender_host_address$ and
+$sender_host_name$ can be used in the query. For example:
+
+....
+hosts_lookup = pgsql;\
+ select ip from hostlist where ip='$sender_host_address'
+....
+
+The value of $sender_host_address$ for an IPv6 address contains colons. You
+can use the %sg% expansion item to change this if you need to. If you want to
+use masked IP addresses in database queries, you can use the %mask% expansion
+operator.
+
+If the query contains a reference to $sender_host_name$, Exim automatically
+looks up the host name if has not already done so. (See section
+<<SECThoslispatnam>> for comments on finding host names.)
+
+Historical note: prior to release 4.30, Exim would always attempt to find a
+host name before running the query, unless the search type was preceded by
+`net-`. This is no longer the case. For backwards compatibility, `net-` is
+still recognized for query-style lookups, but its presence or absence has no
+effect. (Of course, for single-key lookups, `net-` 'is' important.
+See section <<SECThoslispatsikey>>.)
+
+
+
+[[SECTmixwilhos]]
+Mixing wildcarded host names and addresses in host lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host list,mixing names and addresses in]
+If you have name lookups or wildcarded host names and IP addresses in the same
+host list, you should normally put the IP addresses first. For example, in an
+ACL you could have:
+
+ accept hosts = 10.9.8.7 : *.friend.example
+
+The reason for this lies in the left-to-right way that Exim processes lists.
+It can test IP addresses without doing any DNS lookups, but when it reaches an
+item that requires a host name, it fails if it cannot find a host name to
+compare with the pattern. If the above list is given in the opposite order, the
+%accept% statement fails for a host whose name cannot be found, even if its
+IP address is 10.9.8.7.
+
+If you really do want to do the name check first, and still recognize the IP
+address, you can rewrite the ACL like this:
+
+ accept hosts = *.friend.example
+ accept hosts = 10.9.8.7
+
+If the first %accept% fails, Exim goes on to try the second one. See chapter
+<<CHAPACL>> for details of ACLs.
+
+
+
+
+
+[[SECTaddresslist]]
+Address lists
+~~~~~~~~~~~~~
+cindex:[list,address list]
+cindex:[address list,empty item]
+cindex:[address list,patterns]
+Address lists contain patterns that are matched against mail addresses. There
+is one special case to be considered: the sender address of a bounce message is
+always empty. You can test for this by providing an empty item in an address
+list. For example, you can set up a router to process bounce messages by
+using this option setting:
+
+ senders = :
+
+The presence of the colon creates an empty item. If you do not provide any
+data, the list is empty and matches nothing. The empty sender can also be
+detected by a regular expression that matches an empty string,
+
+and by a query-style lookup that succeeds when $sender_address$ is empty.
+
+The following kinds of address list pattern can match any address, including
+the empty address that is characteristic of bounce message senders:
+
+- As explained above, if a pattern item is empty, it matches the empty address
+(and no others).
+
+- cindex:[regular expressions,in address list]
+cindex:[address list,regular expression in]
+If (after expansion) a pattern starts with ``^'', a regular expression match is
+done against the complete address, with the pattern as the regular expression.
+You must take care that backslash and dollar characters are not misinterpreted
+as part of the string expansion. The simplest way to do this is to use `\N`
+to mark that part of the string as non-expandable. For example:
+
+ deny senders = \N^\d{8}.+@spamhaus.example$\N : ...
++
+The `\N` sequences are removed by the expansion, so the item does start
+with ``^'' by the time it is being interpreted as an address pattern.
+
+- cindex:[address list,lookup for complete address]
+Complete addresses can be looked up by using a pattern that starts with a
+lookup type terminated by a semicolon, followed by the data for the lookup. For
+example:
++
+....
+deny senders = cdb;/etc/blocked.senders : \
+ mysql;select address from blocked where \
+ address='${quote_mysql:$sender_address}'
+....
++
+Both query-style and single-key lookup types can be used. For a single-key
+lookup type, Exim uses the complete address as the key. However, empty keys are
+not supported for single-key lookups, so a match against the empty address
+always fails. This restriction does not apply to query-style lookups.
++
+Partial matching for single-key lookups (section <<SECTpartiallookup>>) cannot
+be used, and is ignored if specified, with an entry being written to the panic
+log.
++
+cindex:[\*@ with single-key lookup]
+However, you can configure lookup defaults, as described in section
+<<SECTdefaultvaluelookups>>, but this is useful only for the ``\*@'' type of
+default. For example, with this lookup:
+
+ accept senders = lsearch*@;/some/file
++
+the file could contains lines like this:
+
+ user1@domain1.example
+ *@domain2.example
++
+and for the sender address 'nimrod@jaeger.example', the sequence of keys
+that are tried is:
+
+ nimrod@jaeger.example
+ *@jaeger.example
+ *
++
+*Warning 1*: Do not include a line keyed by ``\*'' in the file, because that
+would mean that every address matches, thus rendering the test useless.
++
+*Warning 2*: Do not confuse these two kinds of item:
+
+ deny recipients = dbm*@;/some/file
+ deny recipients = *@dbm;/some/file
++
+The first does a whole address lookup, with defaulting, as just described,
+because it starts with a lookup type. The second matches the local part and
+domain independently, as described in a bullet point below.
+
+
+
+The following kinds of address list pattern can match only non-empty addresses.
+If the subject address is empty, a match against any of these pattern types
+always fails.
+
+
+- cindex:[@@ with single-key lookup]
+cindex:[address list,@@ lookup type]
+cindex:[address list,split local part and domain]
+If a pattern starts with ``@@'' followed by a single-key lookup item
+(for example, `@@lsearch;/some/file`), the address that is being checked is
+split into a local part and a domain. The domain is looked up in the file. If
+it is not found, there is no match. If it is found, the data that is looked up
+from the file is treated as a colon-separated list of local part patterns, each
+of which is matched against the subject local part in turn.
++
+cindex:[asterisk,in address list]
+The lookup may be a partial one, and/or one involving a search for a default
+keyed by ``\*'' (see section <<SECTdefaultvaluelookups>>). The local part patterns
+that are looked up can be regular expressions or begin with ``\*'', or even be
+further lookups. They may also be independently negated. For example, with
+
+ deny senders = @@dbm;/etc/reject-by-domain
++
+the data from which the DBM file is built could contain lines like
+
+ baddomain.com: !postmaster : *
++
+to reject all senders except %postmaster% from that domain.
++
+cindex:[local part,starting with !]
+If a local part that actually begins with an exclamation mark is required, it
+has to be specified using a regular expression. In ^lsearch^ files, an entry
+may be split over several lines by indenting the second and subsequent lines,
+but the separating colon must still be included at line breaks. White space
+surrounding the colons is ignored. For example:
+
+ aol.com: spammer1 : spammer2 : ^[0-9]+$ :
+ spammer3 : spammer4
++
+As in all colon-separated lists in Exim, a colon can be included in an item by
+doubling.
++
+If the last item in the list starts with a right angle-bracket, the remainder
+of the item is taken as a new key to look up in order to obtain a continuation
+list of local parts. The new key can be any sequence of characters. Thus one
+might have entries like
+
+ aol.com: spammer1 : spammer 2 : >*
+ xyz.com: spammer3 : >*
+ *: ^\d{8}$
++
+in a file that was searched with %@@dbm\*%, to specify a match for 8-digit
+local parts for all domains, in addition to the specific local parts listed for
+each domain. Of course, using this feature costs another lookup each time a
+chain is followed, but the effort needed to maintain the data is reduced.
++
+cindex:[loop,in lookups]
+It is possible to construct loops using this facility, and in order to catch
+them, the chains may be no more than fifty items long.
+
+- The @@<'lookup'> style of item can also be used with a query-style
+lookup, but in this case, the chaining facility is not available. The lookup
+can only return a single list of local parts.
+
+- If a pattern contains an @ character, but is not a regular expression and does
+not begin with a lookup type as described above, the local part of the subject
+address is compared with the local part of the pattern, which may start with an
+asterisk. If the local parts match, the domain is checked in exactly the same
+way as for a pattern in a domain list. For example, the domain can be
+wildcarded, refer to a named list, or be a lookup:
++
+....
+deny senders = *@*.spamming.site:\
+ *@+hostile_domains:\
+ bozo@partial-lsearch;/list/of/dodgy/sites:\
+ *@dbm;/bad/domains.db
+....
++
+cindex:[local part,starting with !]
+cindex:[address list,local part starting with !]
+If a local part that begins with an exclamation mark is required, it has to be
+specified using a regular expression, because otherwise the exclamation mark is
+treated as a sign of negation.
+
+- If a pattern is not one of the above syntax forms, that is, if a
+non-empty pattern that is not a regular expression or a lookup does not contain
+an @ character, it is matched against the domain part of the subject address.
+The only two formats that are recognized this way are a literal domain, or a
+domain pattern that starts with \*. In both these cases, the effect is the same
+as if `*@` preceded the pattern.
+
+*Warning*: there is an important difference between the address list items
+in these two examples:
+
+ senders = +my_list
+ senders = *@+my_list
+
+In the first one, `my_list` is a named address list, whereas in the second
+example it is a named domain list.
+
+
+
+
+[[SECTcasletadd]]
+Case of letters in address lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[case of local parts]
+cindex:[address list,case forcing]
+cindex:[case forcing in address lists]
+Domains in email addresses are always handled caselessly, but for local parts
+case may be significant on some systems (see %caseful_local_part% for how
+Exim deals with this when routing addresses). However, RFC 2505 ('Anti-Spam
+Recommendations for SMTP MTAs') suggests that matching of addresses to blocking
+lists should be done in a case-independent manner. Since most address lists in
+Exim are used for this kind of control, Exim attempts to do this by default.
+
+The domain portion of an address is always lowercased before matching it to an
+address list. The local part is lowercased by default, and any string
+comparisons that take place are done caselessly. This means that the data in
+the address list itself, in files included as plain file names, and in any file
+that is looked up using the ``@@'' mechanism, can be in any case. However, the
+keys in files that are looked up by a search type other than ^lsearch^ (which
+works caselessly) must be in lower case, because these lookups are not
+case-independent.
+
+cindex:[`+caseful`]
+To allow for the possibility of caseful address list matching, if an item in
+an address list is the string ``+caseful'', the original case of the local
+part is restored for any comparisons that follow, and string comparisons are no
+longer case-independent. This does not affect the domain, which remains in
+lower case. However, although independent matches on the domain alone are still
+performed caselessly, regular expressions that match against an entire address
+become case-sensitive after ``+caseful'' has been seen.
+
+
+
+[[SECTlocparlis]]
+Local part lists
+~~~~~~~~~~~~~~~~
+cindex:[list,local part list]
+cindex:[local part,list]
+Case-sensitivity in local part lists is handled in the same way as for address
+lists, as just described. The ``+caseful'' item can be used if required. In a
+setting of the %local_parts% option in a router with %caseful_local_part%
+set false, the subject is lowercased and the matching is initially
+case-insensitive. In this case, ``+caseful'' will restore case-sensitive matching
+in the local part list, but not elsewhere in the router. If
+%caseful_local_part% is set true in a router, matching in the %local_parts%
+option is case-sensitive from the start.
+
+If a local part list is indirected to a file (see section <<SECTfilnamlis>>),
+comments are handled in the same way as address lists -- they are recognized
+only if the # is preceded by white space or the start of the line.
+Otherwise, local part lists are matched in the same way as domain lists, except
+that the special items that refer to the local host (`@`, `@[]`,
+`@mx_any`, `@mx_primary`, and `@mx_secondary`) are not recognized.
+Refer to section <<SECTdomainlist>> for details of the other available item
+types.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPexpand]]
+String expansions
+-----------------
+cindex:[expansion,of strings]
+Many strings in Exim's run time configuration are expanded before use. Some of
+them are expanded every time they are used; others are expanded only once.
+
+When a string is being expanded it is copied verbatim from left to right except
+when a dollar or backslash character is encountered. A dollar specifies the
+start of a portion of the string which is interpreted and replaced as described
+below in section <<SECTexpansionitems>> onwards. Backslash is used as an escape
+character, as described in the following section.
+
+
+
+[[SECTlittext]]
+Literal text in expanded strings
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,including literal text]
+An uninterpreted dollar can be included in an expanded string by putting a
+backslash in front of it. A backslash can be used to prevent any special
+character being treated specially in an expansion, including itself. If the
+string appears in quotes in the configuration file, two backslashes are
+required because the quotes themselves cause interpretation of backslashes when
+the string is read in (see section <<SECTstrings>>).
+
+cindex:[expansion,non-expandable substrings]
+A portion of the string can specified as non-expandable by placing it between
+two occurrences of `\N`. This is particularly useful for protecting regular
+expressions, which often contain backslashes and dollar signs. For example:
+
+ deny senders = \N^\d{8}[a-z]@some\.site\.example$\N
+
+On encountering the first `\N`, the expander copies subsequent characters
+without interpretation until it reaches the next `\N` or the end of the
+string.
+
+
+
+Character escape sequences in expanded strings
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,escape sequences]
+A backslash followed by one of the letters ``n'', ``r'', or ``t'' in an expanded
+string is recognized as an escape sequence for the character newline, carriage
+return, or tab, respectively. A backslash followed by up to three octal digits
+is recognized as an octal encoding for a single character, and a backslash
+followed by ``x'' and up to two hexadecimal digits is a hexadecimal encoding.
+
+These escape sequences are also recognized in quoted strings when they are read
+in. Their interpretation in expansions as well is useful for unquoted strings,
+and for other cases such as looked-up strings that are then expanded.
+
+
+Testing string expansions
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,testing]
+cindex:[testing,string expansion]
+cindex:[%-be% option]
+Many expansions can be tested by calling Exim with the %-be% option. This takes
+the command arguments, or lines from the standard input if there are no
+arguments, runs them through the string expansion code, and writes the results
+to the standard output. Variables based on configuration values are set up, but
+since no message is being processed, variables such as $local_part$ have no
+value. Nevertheless the %-be% option can be useful for checking out file and
+database lookups, and the use of expansion operators such as %sg%, %substr% and
+%nhash%.
+
+Exim gives up its root privilege when it is called with the %-be% option, and
+instead runs under the uid and gid it was called with, to prevent users from
+using %-be% for reading files to which they do not have access.
+
+
+
+[[SECTforexpfai]]
+Forced expansion failure
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,forced failure]
+A number of expansions that are described in the following section have
+alternative ``true'' and ``false'' substrings, enclosed in curly brackets. Which
+one is used depends on some condition that is evaluated as part of the
+expansion. If, instead of a ``false'' substring, the word ``fail'' is used (not in
+curly brackets), the entire string expansion fails in a way that can be
+detected by the code that requested the expansion. This is called ``forced
+expansion failure'', and its consequences depend on the circumstances. In some
+cases it is no different from any other expansion failure, but in others a
+different action may be taken. Such variations are mentioned in the
+documentation of the option that is being expanded.
+
+
+
+
+[[SECTexpansionitems]]
+Expansion items
+~~~~~~~~~~~~~~~
+The following items are recognized in expanded strings. White space may be used
+between sub-items that are keywords or substrings enclosed in braces inside an
+outer set of braces, to improve readability. *Warning*: Within braces,
+white space is significant.
+
+*\$*<'variable~name'>~or~*\$\{*<'variable~name'>*\}*::
+cindex:[expansion,variables]
+Substitute the contents of the named variable, for example
+
+ $local_part
+ ${domain}
++
+The second form can be used to separate the name from subsequent alphanumeric
+characters. This form (using curly brackets) is available only for variables;
+it does 'not' apply to message headers. The names of the variables are given
+in section <<SECTexpvar>> below. If the name of a non-existent variable is given,
+the expansion fails.
+
+*\$\{*<'op'>*:*<'string'>*\}*::
+cindex:[expansion,operators]
+The string is first itself expanded, and then the operation specified by <'op'>
+is applied to it. For example,
+
+ ${lc:$local_part}
++
+The string starts with the first character after the colon, which may be
+leading white space. A list of operators is given in section <<SECTexpop>>
+below. The operator notation is used for simple expansion items that have just
+one argument, because it reduces the number of braces and therefore makes the
+string easier to understand.
+
+*\$\{extract\{*<'key'>*\}\{*<'string1'>*\}\{*<'string2'>*\}\{*<'string3'>*\}\}*::
+cindex:[expansion,extracting substrings by key]
+The key and <'string1'> are first expanded separately. Leading and trailing
+whitespace is removed from the key (but not from any of the strings). The key
+must not consist entirely of digits. The expanded <'string1'> must be of the
+form:
+
+ <key1> = <value1> <key2> = <value2> ...
++
+where the equals signs and spaces (but not both) are optional. If any of the
+values contain white space, they must be enclosed in double quotes, and any
+values that are enclosed in double quotes are subject to escape processing as
+described in section <<SECTstrings>>. The expanded <'string1'> is searched for
+the value that corresponds to the key. The search is case-insensitive. If the
+key is found, <'string2'> is expanded, and replaces the whole item; otherwise
+<'string3'> is used. During the expansion of <'string2'> the variable $value$
+contains the value that has been extracted. Afterwards, it is restored to any
+previous value it might have had.
++
+If \{<'string3'>\} is omitted, the item is replaced by an empty string if the
+key is not found. If \{<'string2'>\} is also omitted, the value that was
+extracted is used. Thus, for example, these two expansions are identical, and
+yield ``2001'':
+
+ ${extract{gid}{uid=1984 gid=2001}}
+ ${extract{gid}{uid=1984 gid=2001}{$value}}
++
+Instead of \{<'string3'>\} the word ``fail'' (not in curly brackets) can
+appear, for example:
+
+ ${extract{Z}{A=... B=...}{$value} fail }
++
+This forces an expansion failure (see section <<SECTforexpfai>>);
+{<'string2'>\} must be present for ``fail'' to be recognized.
+
+
+*\$\{extract\{*<'number'>*\}\{*<'separators'>*\}\{*<'string1'>*\}\{*<'string2'>*\}\{*<'string3'>*\}\}*::
+cindex:[expansion,extracting substrings by number]
+The <'number'> argument must consist entirely of decimal digits,
+apart from leading and trailing whitespace, which is ignored.
+This is what distinguishes this form of %extract% from the previous kind. It
+behaves in the same way, except that, instead of extracting a named field, it
+extracts from <'string1'> the field whose number is given as the first
+argument. You can use $value$ in <'string2'> or `fail` instead of
+<'string3'> as before.
++
+The fields in the string are separated by any one of the characters in the
+separator string. These may include space or tab characters.
+The first field is numbered one. If the number is negative, the fields are
+counted from the end of the string, with the rightmost one numbered -1. If the
+number given is zero, the entire string is returned. If the modulus of the
+number is greater than the number of fields in the string, the result is the
+expansion of <'string3'>, or the empty string if <'string3'> is not provided.
+For example:
+
+ ${extract{2}{:}{x:42:99:& Mailer::/bin/bash}}
++
+yields ``42'', and
+
+ ${extract{-4}{:}{x:42:99:& Mailer::/bin/bash}}
++
+yields ``99''. Two successive separators mean that the field between them is
+empty (for example, the fifth field above).
+
+
+*\$\{hash\{*<'string1'>*\}\{*<'string2'>*\}\{*<'string3'>*\}\}*::
+cindex:[hash function,textual]
+cindex:[expansion,textual hash]
+This is a textual hashing function, and was the first to be implemented in
+early versions of Exim. In current releases, there are other hashing functions
+(numeric, MD5, and SHA-1), which are described below.
++
+The first two strings, after expansion, must be numbers. Call them <'m'> and
+<'n'>. If you are using fixed values for these numbers, that is, if <'string1'>
+and <'string2'> do not change when they are expanded, you can use the
+simpler operator notation that avoids some of the braces:
+
+ ${hash_<n>_<m>:<string>}
++
+The second number is optional (in both notations).
++
+If <'n'> is greater than or equal to the length of the string, the expansion
+item returns the string. Otherwise it computes a new string of length <'n'> by
+applying a hashing function to the string. The new string consists of
+characters taken from the first <'m'> characters of the string
+
+ abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQWRSTUVWXYZ0123456789
++
+If <'m'> is not present the value 26 is used, so that only lower case
+letters appear. For example:
++
+&&&
+`\${hash{3}{monty}} ` yields `jmg`
+`\${hash{5}{monty}} ` yields `monty`
+`\${hash{4}{62}{monty python}}` yields `fbWx`
+&&&
+
+
+*\$header_*<'header~name'>*:*~or~*\$h_*<'header~name'>*:*::
+See *\$rheader* below.
+
+*\$bheader_*<'header~name'>*:*~or~*\$bh_*<'header~name'>*:*::
+See *\$rheader* below.
+
+*\$rheader_*<'header~name'>*:*~or~*\$rh_*<'header~name'>*:*::
+cindex:[expansion,header insertion]
+cindex:[$header_$]
+cindex:[$bheader_$]
+cindex:[$rheader_$]
+cindex:[header lines,in expansion strings]
+cindex:[header lines,character sets]
+cindex:[header lines,decoding]
+Substitute the contents of the named message header line, for example
+
+ $header_reply-to:
++
+The newline that terminates a header line is not included in the expansion, but
+internal newlines (caused by splitting the header line over several physical
+lines) may be present.
++
+The difference between %rheader%, %bheader%, and %header% is in the way the
+data in the header line is interpreted.
++
+--
+- cindex:[whitespace,in header lines]
+%rheader% gives the original ``raw'' content of the header line, with no
+processing at all, and without the removal of leading and trailing whitespace.
+
+- cindex:[base64 encoding,in header lines]
+%bheader% removes leading and trailing whitespace, and then decodes base64 or
+quoted-printable MIME ``words'' within the header text, but does no character
+set translation. If decoding of what looks superficially like a MIME ``word''
+fails, the raw string is returned. If decoding
+cindex:[binary zero,in header line]
+produces a binary zero character, it is replaced by a question mark -- this is
+what Exim does for binary zeros that are actually received in header lines.
+
+- %header% tries to translate the string as decoded by %bheader% to a standard
+character set. This is an attempt to produce the same string as would be
+displayed on a user's MUA. If translation fails, the %bheader% string is
+returned. Translation is attempted only on operating systems that support the
+'iconv()' function. This is indicated by the compile-time macro
+HAVE_ICONV in a system Makefile or in _Local/Makefile_.
+--
++
+In a filter file, the target character set for %header% can be specified by a
+command of the following form:
+
+ headers charset "UTF-8"
++
+This command affects all references to $h_$ (or $header_$) expansions in
+subsequently obeyed filter commands. In the absence of this command, the target
+character set in a filter is taken from the setting of the %headers_charset%
+option in the runtime configuration. The value of this option defaults to the
+value of HEADERS_CHARSET in _Local/Makefile_. The ultimate default is
+ISO-8859-1.
++
+Header names follow the syntax of RFC 2822, which states that they may contain
+any printing characters except space and colon. Consequently, curly brackets
+'do not' terminate header names, and should not be used to enclose them as
+if they were variables. Attempting to do so causes a syntax error.
++
+Only header lines that are common to all copies of a message are visible to
+this mechanism. These are the original header lines that are received with the
+message, and any that are added by an ACL %warn% statement or by a system
+filter. Header lines that are added to a particular copy of a message by a
+router or transport are not accessible.
++
+For incoming SMTP messages, no header lines are visible in ACLs that are obeyed
+before the DATA ACL, because the header structure is not set up until the
+message is received. Header lines that are added by %warn% statements in a
+RCPT ACL (for example) are saved until the message's incoming header lines
+are available, at which point they are added. When a DATA ACL is running,
+however, header lines added by earlier ACLs are visible.
++
+Upper case and lower case letters are synonymous in header names. If the
+following character is white space, the terminating colon may be omitted, but
+this is not recommended, because you may then forget it when it is needed. When
+white space terminates the header name, it is included in the expanded string.
+If the message does not contain the given header, the expansion item is
+replaced by an empty string. (See the %def% condition in section <<SECTexpcond>>
+for a means of testing for the existence of a header.)
++
+If there is more than one header with the same name, they are all
+concatenated to form the substitution string, up to a maximum length of 64K. A
+newline character is inserted between each line. For the %header% expansion,
+for those headers that contain lists of addresses, a comma is also inserted at
+the junctions between lines. This does not happen for the %rheader% expansion.
+
+
+
+*\$\{hmac\{*<'hashname'>*\}\{*<'secret'>*\}\{*<'string'>*\}\}*::
+cindex:[expansion,hmac hashing]
+This function uses cryptographic hashing (either MD5 or SHA-1) to convert a
+shared secret and some text into a message authentication code, as specified in
+RFC 2104. This differs from `\$\{md5:secret_text...\}` or
+`\$\{sha1:secret_text...\}` in that the hmac step adds a signature to the
+cryptographic hash, allowing for authentication that is not possible with MD5
+or SHA-1 alone. The hash name must expand to either `md5` or `sha1` at present.
+For example:
+
+ ${hmac{md5}{somesecret}{$primary_hostname $tod_log}}
++
+For the hostname 'mail.example.com' and time 2002-10-17 11:30:59, this
+produces:
+
+ dd97e3ba5d1a61b5006108f8c8252953
++
+As an example of how this might be used, you might put in the main part of
+an Exim configuration:
+
+ SPAMSCAN_SECRET=cohgheeLei2thahw
++
+In a router or a transport you could then have:
++
+....
+headers_add = \
+ X-Spam-Scanned: ${primary_hostname} ${message_id} \
+ ${hmac{md5}{SPAMSCAN_SECRET}\
+ {${primary_hostname},${message_id},$h_message-id:}}
+....
++
+Then given a message, you can check where it was scanned by looking at the
+'X-Spam-Scanned:' header line. If you know the secret, you can check that this
+header line is authentic by recomputing the authentication code from the host
+name, message ID and the 'Message-id:' header line. This can be done using
+Exim's %-be% option, or by other means, for example by using the
+'hmac_md5_hex()' function in Perl.
+
+
+*\$\{if~*<'condition'>*~\{*<'string1'>*\}\{*<'string2'>*\}\}*::
+cindex:[expansion,conditional]
+If <'condition'> is true, <'string1'> is expanded and replaces the whole item;
+otherwise <'string2'> is used. The available conditions are described in
+section <<SECTexpcond>> below. For example:
+
+ ${if eq {$local_part}{postmaster} {yes}{no} }
++
+The second string need not be present; if it is not and the condition is not
+true, the item is replaced with nothing. Alternatively, the word ``fail'' may be
+present instead of the second string (without any curly brackets). In this
+case, the expansion is forced to fail if the condition is not true (see section
+<<SECTforexpfai>>).
++
+If both strings are omitted, the result is the string `true` if the condition
+is true, and the empty string if the condition is false. This makes it less
+cumbersome to write custom ACL and router conditions. For example, instead of
+
+ condition = ${if >{$acl_m4}{3}{true}{false}}
++
+you can use
+
+ condition = ${if >{$acl_m4}{3}}
+
+
+
+*\$\{length\{*<'string1'>*\}\{*<'string2'>*\}\}*::
+cindex:[expansion,string truncation]
+The %length% item is used to extract the initial portion of a string. Both
+strings are expanded, and the first one must yield a number, <'n'>, say. If you
+are using a fixed value for the number, that is, if <'string1'> does not change
+when expanded, you can use the simpler operator notation that avoids some of
+the braces:
+
+ ${length_<n>:<string>}
++
+The result of this item is either the first <'n'> characters or the whole
+of <'string2'>, whichever is the shorter. Do not confuse %length% with
+%strlen%, which gives the length of a string.
+
+
+*\$\{lookup\{*<'key'>*\}~*<'search~type'>*~\{*<'file'>*\}~\{*<'string1'>*\}~\{*<'string2'>*\}\}*::
+This is the first of one of two different types of lookup item, which are both
+described in the next item.
+
+*\$\{lookup~*<'search~type'>*~\{*<'query'>*\}~\{*<'string1'>*\}~\{*<'string2'>*\}\}*::
+cindex:[expansion,lookup in]
+cindex:[file,lookup]
+cindex:[lookup,in expanded string]
+The two forms of lookup item specify data lookups in files and databases, as
+discussed in chapter <<CHAPfdlookup>>. The first form is used for single-key
+lookups, and the second is used for query-style lookups. The <'key'>, <'file'>,
+and <'query'> strings are expanded before use.
++
+If there is any white space in a lookup item which is part of a filter command,
+a retry or rewrite rule, a routing rule for the ^manualroute^ router, or any
+other place where white space is significant, the lookup item must be enclosed
+in double quotes. The use of data lookups in users' filter files may be locked
+out by the system administrator.
++
+cindex:[$value$]
+If the lookup succeeds, <'string1'> is expanded and replaces the entire item.
+During its expansion, the variable $value$ contains the data returned by the
+lookup. Afterwards it reverts to the value it had previously (at the outer
+level it is empty). If the lookup fails, <'string2'> is expanded and replaces
+the entire item. If \{<'string2'>\} is omitted, the replacement is the empty
+string on failure. If <'string2'> is provided, it can itself be a nested
+lookup, thus providing a mechanism for looking up a default value when the
+original lookup fails.
++
+If a nested lookup is used as part of <'string1'>, $value$ contains the data
+for the outer lookup while the parameters of the second lookup are expanded,
+and also while <'string2'> of the second lookup is expanded, should the second
+lookup fail. + Instead of \{<'string2'>\} the word ``fail'' can appear, and in
+this case, if the lookup fails, the entire expansion is forced to fail (see
+section <<SECTforexpfai>>). If both \{<'string1'>\} and \{<'string2'>\} are
+omitted, the result is the looked up value in the case of a successful lookup,
+and nothing in the case of failure.
++
+For single-key lookups, the string ``partial'' is permitted to precede the
+search type in order to do partial matching, and \* or \*@ may follow a search
+type to request default lookups if the key does not match (see sections
+<<SECTdefaultvaluelookups>> and <<SECTpartiallookup>> for details).
++
+cindex:[numerical variables ($1$ $2$ etc),in lookup expansion]
+If a partial search is used, the variables $1$ and $2$ contain the wild
+and non-wild parts of the key during the expansion of the replacement text.
+They return to their previous values at the end of the lookup item.
++
+This example looks up the postmaster alias in the conventional alias file:
+
+ ${lookup {postmaster} lsearch {/etc/aliases} {$value}}
++
+This example uses NIS+ to look up the full name of the user corresponding to
+the local part of an address, forcing the expansion to fail if it is not found:
++
+....
+${lookup nisplus {[name=$local_part],passwd.org_dir:gcos} \
+ {$value}fail}
+....
+
+
+*\$\{nhash\{*<'string1'>*\}\{*<'string2'>*\}\{*<'string3'>*\}\}*::
+cindex:[expansion,numeric hash]
+cindex:[hash function,numeric]
+The three strings are expanded; the first two must yield numbers. Call them
+<'n'> and <'m'>. If you are using fixed values for these numbers, that is, if
+<'string1'> and <'string2'> do not change when they are expanded, you can use
+the simpler operator notation that avoids some of the braces:
+
+ ${nhash_<n>_<m>:<string>}
++
+The second number is optional (in both notations). If there is only one number,
+the result is a number in the range 0--<'n'>-1. Otherwise, the string is
+processed by a div/mod hash function that returns two numbers, separated by a
+slash, in the ranges 0 to <'n'>-1 and 0 to <'m'>-1, respectively. For example,
+
+ ${nhash{8}{64}{supercalifragilisticexpialidocious}}
++
+returns the string ``6/33''.
+
+
+
+*\$\{perl\{*<'subroutine'>*\}\{*<'arg'>*\}\{*<'arg'>*\}...\}*::
+cindex:[Perl,use in expanded string]
+cindex:[expansion,calling Perl from]
+This item is available only if Exim has been built to include an embedded Perl
+interpreter. The subroutine name and the arguments are first separately
+expanded, and then the Perl subroutine is called with those arguments. No
+additional arguments need be given; the maximum number permitted, including the
+name of the subroutine, is nine.
++
+The return value of the subroutine is inserted into the expanded string, unless
+the return value is %undef%. In that case, the expansion fails in the same way
+as an explicit ``fail'' on a lookup item.
+The return value is a scalar. Whatever you return is evaluated in a scalar
+context. For example, if you return the name of a Perl vector, the
+return value is the size of the vector, not its contents.
++
+If the subroutine exits by calling Perl's %die% function, the expansion fails
+with the error message that was passed to %die%. More details of the embedded
+Perl facility are given in chapter <<CHAPperl>>.
++
+The ^redirect^ router has an option called %forbid_filter_perl% which locks
+out the use of this expansion item in filter files.
+
+
+*\$\{readfile\{*<'file~name'>*\}\{*<'eol~string'>*\}\}*::
+cindex:[expansion,inserting an entire file]
+cindex:[file,inserting into expansion]
+The file name and end-of-line string are first expanded separately. The file is
+then read, and its contents replace the entire item. All newline characters in
+the file are replaced by the end-of-line string if it is present. Otherwise,
+newlines are left in the string.
+String expansion is not applied to the contents of the file. If you want this,
+you must wrap the item in an %expand% operator. If the file cannot be read, the
+string expansion fails.
++
+The ^redirect^ router has an option called %forbid_filter_readfile% which
+locks out the use of this expansion item in filter files.
+
+
+
+*\$\{readsocket\{*<'name'>*\}\{*<'request'>*\}\{*<'timeout'>*\}\{*<'eol~string'>*\}\{*<'fail~string'>*\}\}*::
+cindex:[expansion,inserting from a socket]
+cindex:[socket, use of in expansion]
+This item inserts data that is read from a Unix domain socket into the expanded
+string. The minimal way of using it uses just two arguments:
+
+ ${readsocket{/socket/name}{request string}}
++
+Exim connects to the socket, writes the request string (unless it is an
+empty string) and reads from the socket until an end-of-file is read. A timeout
+of 5 seconds is applied. Additional, optional arguments extend what can be
+done. Firstly, you can vary the timeout. For example:
+
+ ${readsocket{/socket/name}{request-string}{3s}}
++
+A fourth argument allows you to change any newlines that are in the data
+that is read, in the same way as for %readfile% (see above). This example turns
+them into spaces:
+
+ ${readsocket{/socket/name}{request-string}{3s}{ }}
++
+As with all expansions, the substrings are expanded before the processing
+happens. Errors in these sub-expansions cause the expansion to fail. In
+addition, the following errors can occur:
++
+--
+- Failure to create a socket file descriptor;
+
+- Failure to connect the socket;
+
+- Failure to write the request-string;
+
+- Timeout on reading from the socket.
+--
++
+By default, any of these errors causes the expansion to fail. However, if
+you supply a fifth substring, it is expanded and used when any of the above
+errors occurs. For example:
++
+....
+ ${readsocket{/socket/name}{request-string}{3s}{\n}\
+ {socket failure}}
+....
++
+You can test for the existence of the socket by wrapping this expansion in
+`\$\{if exists`, but there is a race condition between that test and the
+actual opening of the socket, so it is safer to use the fifth argument if you
+want to be absolutely sure of avoiding an expansion error for a non-existent
+socket.
++
+The ^redirect^ router has an option called %forbid_filter_readsocket% which
+locks out the use of this expansion item in filter files.
+
+*\$rheader_*<'header~name'>*:~or~\$rh_*<'header~name'>*:*::
+This item inserts ``raw'' header lines. It is described with the %header%
+expansion item above.
+
+
+
+*\$\{run\{*<'command'>*~*<'args'>*\}\{*<'string1'>*\}\{*<'string2'>*\}\}*::
+cindex:[expansion,running a command]
+The command and its arguments are first expanded separately, and then the
+command is run in a separate process, but under the same uid and gid. As in
+other command executions from Exim, a shell is not used by default. If you want
+a shell, you must explicitly code it.
++
+cindex:[return code,from %run% expansion]
+If the command succeeds (gives a zero return code) <'string1'> is expanded and
+replaces the entire item; during this expansion, the standard output from the
+command is in the variable $value$. If the command fails, <'string2'>, if
+present, is expanded. If it is absent, the result is empty. Alternatively,
+<'string2'> can be the word ``fail'' (not in braces) to force expansion failure
+if the command does not succeed. If both strings are omitted, the result is the
+standard output on success, and nothing on failure.
++
+The return code from the command is put in the variable $runrc$, and this
+remains set afterwards, so in a filter file you can do things like this:
+
+ if "${run{x y z}{}}$runrc" is 1 then ...
+ elif $runrc is 2 then ...
+ ...
+ endif
++
+If execution of the command fails (for example, the command does not exist),
+the return code is 127 -- the same code that shells use for non-existent
+commands.
++
+*Warning*: In a router or transport, you cannot assume the order in which
+option values are expanded, except for those pre-conditions whose order of
+testing is documented. Therefore, you cannot reliably expect to set $runrc$
+by the expansion of one option, and use it in another.
++
+The ^redirect^ router has an option called %forbid_filter_run% which locks
+out the use of this expansion item in filter files.
+
+
+*\$\{sg\{*<'subject'>*\}\{*<'regex'>*\}\{*<'replacement'>*\}\}*::
+cindex:[expansion,string substitution]
+This item works like Perl's substitution operator (s) with the global (/g)
+option; hence its name. However, unlike the Perl equivalent, Exim does not
+modify the subject string; instead it returns the modified string for insertion
+into the overall expansion. The item takes three arguments: the subject string,
+a regular expression, and a substitution string. For example
+
+ ${sg{abcdefabcdef}{abc}{xyz}}
++
+yields ``xyzdefxyzdef''. Because all three arguments are expanded before use, if
+any \$ or \ characters are required in the regular expression or in the
+substitution string, they have to be escaped. For example
+
+ ${sg{abcdef}{^(...)(...)\$}{\$2\$1}}
++
+yields ``defabc'', and
+
+ ${sg{1=A 4=D 3=C}{\N(\d+)=\N}{K\$1=}}
++
+yields ``K1=A K4=D K3=C''. Note the use of `\N` to protect the contents of
+the regular expression from string expansion.
+
+
+
+*\$\{substr\{*<'string1'>*\}\{*<'string2'>*\}\{*<'string3'>*\}\}*::
+cindex:[%substr%]
+cindex:[substring extraction]
+cindex:[expansion,substring extraction]
+The three strings are expanded; the first two must yield numbers. Call them
+<'n'> and <'m'>. If you are using fixed values for these numbers, that is, if
+<'string1'> and <'string2'> do not change when they are expanded, you can use
+the simpler operator notation that avoids some of the braces:
+
+ ${substr_<n>_<m>:<string>}
++
+The second number is optional (in both notations).
+If it is absent in the simpler format, the preceding underscore must also be
+omitted.
++
+The %substr% item can be used to extract more general substrings than
+%length%. The first number, <'n'>, is a starting offset, and <'m'> is the
+length required. For example
+
+ ${substr{3}{2}{$local_part}}
++
+If the starting offset is greater than the string length the result is the
+null string; if the length plus starting offset is greater than the string
+length, the result is the right-hand part of the string, starting from the
+given offset. The first character in the string has offset zero.
++
+The %substr% expansion item can take negative offset values to count
+from the right-hand end of its operand. The last character is offset -1, the
+second-last is offset -2, and so on. Thus, for example,
+
+ ${substr{-5}{2}{1234567}}
++
+yields ``34''. If the absolute value of a negative offset is greater than the
+length of the string, the substring starts at the beginning of the string, and
+the length is reduced by the amount of overshoot. Thus, for example,
+
+ ${substr{-5}{2}{12}}
++
+yields an empty string, but
+
+ ${substr{-3}{2}{12}}
++
+yields ``1''.
++
+When the second number is omitted from %substr%, the remainder of the string
+is taken if the offset is positive. If it is negative, all characters in the
+string preceding the offset point are taken. For example, an offset of -1 and
+no length, as in these semantically identical examples:
+
+ ${substr_-1:abcde}
+ ${substr{-1}{abcde}}
++
+yields all but the last character of the string, that is, ``abcd''.
+
+
+
+*\$\{tr\{*<'subject'>*\}\{*<'characters'>*\}\{*<'replacements'>*\}\}*::
+cindex:[expansion,character translation]
+This item does single-character translation on its subject string. The second
+argument is a list of characters to be translated in the subject string. Each
+matching character is replaced by the corresponding character from the
+replacement list. For example
+
+ ${tr{abcdea}{ac}{13}}
++
+yields `1b3de1`. If there are duplicates in the second character string, the
+last occurrence is used. If the third string is shorter than the second, its
+last character is replicated. However, if it is empty, no translation takes
+place.
+
+
+
+[[SECTexpop]]
+Expansion operators
+~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,operators]
+For expansion items that perform transformations on a single argument string,
+the ``operator'' notation is used because it is simpler and uses fewer braces.
+The substring is first expanded before the operation is applied to it. The
+following operations can be performed:
+
+*\$\{address:*<'string'>*\}*::
+cindex:[expansion,RFC 2822 address handling]
+The string is interpreted as an RFC 2822 address, as it might appear in a
+header line, and the effective address is extracted from it. If the string does
+not parse successfully, the result is empty.
+
+
+*\$\{base62:*<'digits'>*\}*::
+cindex:[base62]
+cindex:[expansion,conversion to base 62]
+The string must consist entirely of decimal digits. The number is converted to
+base 62 (sic) and output as a string of six characters, including leading
+zeros. *Note*: Just to be absolutely clear: this is 'not' base64
+encoding.
+
+*\$\{base62d:*<'base-62~digits'>*\}*::
+cindex:[base62]
+cindex:[expansion,conversion to base 62]
+The string must consist entirely of base-62 digits. The number is converted to
+decimal and output as a string.
+
+
+*\$\{domain:*<'string'>*\}*::
+cindex:[domain,extraction]
+cindex:[expansion,domain extraction]
+The string is interpreted as an RFC 2822 address and the domain is extracted
+from it. If the string does not parse successfully, the result is empty.
+
+
+*\$\{escape:*<'string'>*\}*::
+cindex:[expansion,escaping non-printing characters]
+If the string contains any non-printing characters, they are converted to
+escape sequences starting with a backslash. Whether characters with the most
+significant bit set (so-called ``8-bit characters'') count as printing or not is
+controlled by the %print_topbitchars% option.
+
+
+*\$\{eval:*<'string'>*\}*::
+*\$\{eval10:*<'string'>*\}*::
+cindex:[expansion,expression evaluation]
+cindex:[expansion,arithmetic expression]
+These items supports simple arithmetic in expansion strings. The string (after
+expansion) must be a conventional arithmetic expression, but it is limited to
+the four basic operators (plus, minus, times, divide) and parentheses. All
+operations are carried out using integer arithmetic. Plus and minus have a
+lower priority than times and divide; operators with the same priority are
+evaluated from left to right.
++
+For %eval%, numbers may be decimal, octal (starting with ``0'') or hexadecimal
+(starting with ``0x''). For %eval10%, all numbers are taken as decimal, even if
+they start with a leading zero. This can be useful when processing numbers
+extracted from dates or times, which often do have leading zeros.
++
+A number may be followed by ``K'' or ``M'' to multiply it by 1024 or 1024\*1024,
+respectively. Negative numbers are supported. The result of the computation is
+a decimal representation of the answer (without ``K'' or ``M''). For example:
++
+&&&
+`\${eval:1+1} ` yields 2
+`\${eval:1+2*3} ` yields 7
+`\${eval:(1+2)*3} ` yields 9
+&&&
++
+As a more realistic example, in an ACL you might have
++
+....
+deny message = Too many bad recipients
+ condition = \
+ ${if and { \
+ {>{$rcpt_count}{10}} \
+ { \
+ < \
+ {$recipients_count} \
+ {${eval:$rcpt_count/2}} \
+ } \
+ }{yes}{no}}
+....
++
+The condition is true if there have been more than 10 RCPT commands and
+fewer than half of them have resulted in a valid recipient.
+
+
+*\$\{expand:*<'string'>*\}*::
+cindex:[expansion,re-expansion of substring]
+The %expand% operator causes a string to be expanded for a second time. For
+example,
+
+ ${expand:${lookup{$domain}dbm{/some/file}{$value}}}
++
+first looks up a string in a file while expanding the operand for %expand%, and
+then re-expands what it has found.
+
+
+*\$\{from_utf8:*<'string'>*\}*::
+cindex:[Unicode]
+cindex:[UTF-8,conversion from]
+cindex:[expansion,UTF-8 conversion]
+The world is slowly moving towards Unicode, although there are no standards for
+email yet. However, other applications (including some databases) are starting
+to store data in Unicode, using UTF-8 encoding. This operator converts from a
+UTF-8 string to an ISO-8859-1 string. UTF-8 code values greater than 255 are
+converted to underscores. The input must be a valid UTF-8 string. If it is not,
+the result is an undefined sequence of bytes.
++
+Unicode code points with values less than 256 are compatible with ASCII and
+ISO-8859-1 (also known as Latin-1).
+For example, character 169 is the copyright symbol in both cases, though the
+way it is encoded is different. In UTF-8, more than one byte is needed for
+characters with code values greater than 127, whereas ISO-8859-1 is a
+single-byte encoding (but thereby limited to 256 characters). This makes
+translation from UTF-8 to ISO-8859-1 straightforward.
+
+
+*\$\{hash_*<'n'>*_*<'m'>*:*<'string'>*\}*::
+cindex:[hash function,textual]
+cindex:[expansion,textual hash]
+The %hash% operator is a simpler interface to the hashing function that can be
+used when the two parameters are fixed numbers (as opposed to strings that
+change when expanded). The effect is the same as
+
+ ${hash{<n>}{<m>}{<string>}}
++
+See the description of the general %hash% item above for details. The
+abbreviation %h% can be used when %hash% is used as an operator.
+
+
+
+*\$\{hex2b64:*<'hexstring'>*\}*::
+cindex:[base64 encoding,conversion from hex]
+cindex:[expansion,hex to base64]
+This operator converts a hex string into one that is base64 encoded. This can
+be useful for processing the output of the MD5 and SHA-1 hashing functions.
+
+
+*\$\{lc:*<'string'>*\}*::
+cindex:[case forcing in strings]
+cindex:[string,case forcing]
+cindex:[lower casing]
+cindex:[expansion,case forcing]
+This forces the letters in the string into lower-case, for example:
+
+ ${lc:$local_part}
+
+
+
+*\$\{length_*<'number'>*:*<'string'>*\}*::
+cindex:[expansion,string truncation]
+The %length% operator is a simpler interface to the %length% function that can
+be used when the parameter is a fixed number (as opposed to a string that
+changes when expanded). The effect is the same as
+
+ ${length{<number>}{<string>}}
++
+See the description of the general %length% item above for details. Note that
+%length% is not the same as %strlen%. The abbreviation %l% can be used when
+%length% is used as an operator.
+
+
+*\$\{local_part:*<'string'>*\}*::
+cindex:[expansion,local part extraction]
+The string is interpreted as an RFC 2822 address and the local part is
+extracted from it. If the string does not parse successfully, the result is
+empty.
+
+
+*\$\{mask:*<'IP~address'>*/*<'bit~count'>*\}*::
+cindex:[masked IP address]
+cindex:[IP address,masking]
+cindex:[CIDR notation]
+cindex:[expansion,IP address masking]
+If the form of the string to be operated on is not an IP address followed by a
+slash and an integer (that is, a network address in CIDR notation), the
+expansion fails. Otherwise, this operator converts the IP address to binary,
+masks off the least significant bits according to the bit count, and converts
+the result back to text, with mask appended. For example,
+
+ ${mask:10.111.131.206/28}
++
+returns the string ``10.111.131.192/28''. Since this operation is expected to be
+mostly used for looking up masked addresses in files, the result for an IPv6
+address uses dots to separate components instead of colons, because colon
+terminates a key string in lsearch files. So, for example,
+
+ ${mask:3ffe:ffff:836f:0a00:000a:0800:200a:c031/99}
++
+returns the string
+
+ 3ffe.ffff.836f.0a00.000a.0800.2000.0000/99
++
+Letters in IPv6 addresses are always output in lower case.
+
+
+*\$\{md5:*<'string'>*\}*::
+cindex:[MD5 hash]
+cindex:[expansion,MD5 hash]
+The %md5% operator computes the MD5 hash value of the string, and returns it as
+a 32-digit hexadecimal number,
+in which any letters are in lower case.
+
+
+*\$\{nhash_*<'n'>*_*<'m'>*:*<'string'>*\}*::
+cindex:[expansion,numeric hash]
+cindex:[hash function,numeric]
+The %nhash% operator is a simpler interface to the numeric hashing function
+that can be used when the two parameters are fixed numbers (as opposed to
+strings that change when expanded). The effect is the same as
+
+ ${nhash{<n>}{<m>}{<string>}}
++
+See the description of the general %nhash% item above for details.
+
+
+*\$\{quote:*<'string'>*\}*::
+cindex:[quoting,in string expansions]
+cindex:[expansion,quoting]
+The %quote% operator puts its argument into double quotes if it
+is an empty string or
+contains anything other than letters, digits, underscores, dots, and hyphens.
+Any occurrences of double quotes and backslashes are escaped with a backslash.
+Newlines and carriage returns are converted to `\n` and `\r`,
+respectively For example,
+
+ ${quote:ab"*"cd}
++
+becomes
+
+ "ab\"*\"cd"
++
+The place where this is useful is when the argument is a substitution from a
+variable or a message header.
+
+*\$\{quote_local_part:*<'string'>*\}*::
+This operator is like %quote%, except that it quotes the string only if
+required to do so by the rules of RFC 2822 for quoting local parts. For
+example, a plus sign would not cause quoting (but it would for %quote%).
+If you are creating a new email address from the contents of $local_part$
+(or any other unknown data), you should always use this operator.
+
+
+*\$\{quote_*<'lookup-type'>*:*<'string'>*\}*::
+cindex:[quoting,lookup-specific]
+This operator applies lookup-specific quoting rules to the string. Each
+query-style lookup type has its own quoting rules which are described with
+the lookups in chapter <<CHAPfdlookup>>. For example,
+
+ ${quote_ldap:two * two}
++
+returns
+
+ two%20%5C2A%20two
++
+For single-key lookup types, no quoting is ever necessary and this operator
+yields an unchanged string.
+
+
+*\$\{rxquote:*<'string'>*\}*::
+cindex:[quoting,in regular expressions]
+cindex:[regular expressions,quoting]
+The %rxquote% operator inserts a backslash before any non-alphanumeric
+characters in its argument. This is useful when substituting the values of
+variables or headers inside regular expressions.
+
+
+*\$\{rfc2047:*<'string'>*\}*::
+cindex:[expansion,RFC 2047]
+This operator encodes text according to the rules of RFC 2047. This is an
+encoding that is used in header lines to encode non-ASCII characters. It is
+assumed that the input string is in the encoding specified by the
+%headers_charset% option, which defaults to ISO-8859-1. If the string contains
+only characters in the range 33--126, and no instances of the characters
+
+ ? = ( ) < > @ , ; : \ " . [ ] _
++
+it is not modified. Otherwise, the result is the RFC 2047 encoding of the
+string, using as many ``coded words'' as necessary to encode all the
+characters.
+
+
+
+*\$\{sha1:*<'string'>*\}*::
+cindex:[SHA-1 hash]
+cindex:[expansion,SHA-1 hashing]
+The %sha1% operator computes the SHA-1 hash value of the string, and returns it
+as a 40-digit hexadecimal number, in which any letters are in upper case.
+
+
+*\$\{stat:*<'string'>*\}*::
+cindex:[expansion,statting a file]
+cindex:[file,extracting characteristics]
+The string, after expansion, must be a file path. A call to the 'stat()'
+function is made for this path. If 'stat()' fails, an error occurs and the
+expansion fails. If it succeeds, the data from the stat replaces the item, as a
+series of <'name'>=<'value'> pairs, where the values are all numerical,
+except for the value of ``smode''. The names are: ``mode'' (giving the mode as a
+4-digit octal number), ``smode'' (giving the mode in symbolic format as a
+10-character string, as for the 'ls' command), ``inode'', ``device'', ``links'',
+``uid'', ``gid'', ``size'', ``atime'', ``mtime'', and ``ctime''. You can extract individual
+fields using the %extract% expansion item. *Warning*: The file size may be
+incorrect on 32-bit systems for files larger than 2GB.
+
+
+*\$\{str2b64:*<'string'>*\}*::
+cindex:[expansion,base64 encoding]
+cindex:[base64 encoding,in string expansion]
+This operator converts a string into one that is base64 encoded.
+
+
+
+*\$\{strlen:*<'string'>*\}*::
+cindex:[expansion,string length]
+cindex:[string,length in expansion]
+The item is replace by the length of the expanded string, expressed as a
+decimal number. *Note*: Do not confuse %strlen% with %length%.
+
+
+*\$\{substr_*<'start'>*_*<'length'>*:*<'string'>*\}*::
+cindex:[%substr%]
+cindex:[substring extraction]
+cindex:[expansion,substring expansion]
+The %substr% operator is a simpler interface to the %substr% function that can
+be used when the two parameters are fixed numbers (as opposed to strings that
+change when expanded). The effect is the same as
+
+ ${substr{<start>}{<length>}{<string>}}
++
+See the description of the general %substr% item above for details. The
+abbreviation %s% can be used when %substr% is used as an operator.
+
+*\$\{time_interval:*<'string'>*\}*::
+cindex:[%time_interval%]
+cindex:[time interval,formatting]
+The argument (after sub-expansion) must be a sequence of decimal digits that
+represents an interval of time as a number of seconds. It is converted into a
+number of larger units and output in Exim's normal time format, for example,
+`1w3d4h2m6s`.
+
+*\$\{uc:*<'string'>*\}*::
+cindex:[case forcing in strings]
+cindex:[string,case forcing]
+cindex:[upper casing]
+cindex:[expansion,case forcing]
+This forces the letters in the string into upper-case.
+
+
+
+
+
+
+[[SECTexpcond]]
+Expansion conditions
+~~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,conditions]
+The following conditions are available for testing by the %\$\{if% construct
+while expanding strings:
+
+*!*<'condition'>::
+cindex:[expansion,negating a condition]
+Preceding any condition with an exclamation mark negates the result of the
+condition.
+
+<'symbolic~operator'>~*\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[numeric comparison]
+cindex:[expansion,numeric comparison]
+There are a number of symbolic operators for doing numeric comparisons. They
+are:
++
+&&&
+`= ` equal
+`== ` equal
+`> ` greater
+`>= ` greater or equal
+`< ` less
+`<= ` less or equal
+&&&
++
+For example,
+
+ ${if >{$message_size}{10M} ...
++
+Note that the general negation operator provides for inequality testing. The
+two strings must take the form of optionally signed decimal integers,
+optionally followed by one of the letters ``K'' or ``M'' (in either upper or
+lower case), signifying multiplication by 1024 or 1024\*1024, respectively.
+
+*crypteq~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[expansion,encrypted comparison]
+cindex:[encrypted strings, comparing]
+This condition is included in the Exim binary if it is built to support any
+authentication mechanisms (see chapter <<CHAPSMTPAUTH>>). Otherwise, it is
+necessary to define SUPPORT_CRYPTEQ in _Local/Makefile_ to get %crypteq%
+included in the binary.
++
+The %crypteq% condition has two arguments. The first is encrypted and compared
+against the second, which is already encrypted. The second string may be in the
+LDAP form for storing encrypted strings, which starts with the encryption type
+in curly brackets, followed by the data. If the second string does not begin
+with ``\{'' it is assumed to be encrypted with 'crypt()' or 'crypt16()' (see
+below), since such strings cannot begin with ``\{''. Typically this will be a
+field from a password file.
++
+An example of an encrypted string in LDAP form is:
+
+ {md5}CY9rzUYh03PK3k6DJie09g==
++
+If such a string appears directly in an expansion, the curly brackets have to
+be quoted, because they are part of the expansion syntax. For example:
+
+ ${if crypteq {test}{\{md5\}CY9rzUYh03PK3k6DJie09g==}{yes}{no}}
++
+The following encryption types (whose names are matched case-independently) are
+supported:
++
+--
+- cindex:[MD5 hash]
+cindex:[base64 encoding,in encrypted password]
+%\{md5\}% computes the MD5 digest of the first string, and expresses this as
+printable characters to compare with the remainder of the second string. If the
+length of the comparison string is 24, Exim assumes that it is base64 encoded
+(as in the above example). If the length is 32, Exim assumes that it is a
+hexadecimal encoding of the MD5 digest. If the length not 24 or 32, the
+comparison fails.
+
+- cindex:[SHA-1 hash]
+%\{sha1\}% computes the SHA-1 digest of the first string, and expresses this as
+printable characters to compare with the remainder of the second string. If the
+length of the comparison string is 28, Exim assumes that it is base64 encoded.
+If the length is 40, Exim assumes that it is a hexadecimal encoding of the
+SHA-1 digest. If the length is not 28 or 40, the comparison fails.
+
+- cindex:['crypt()']
+%\{crypt\}% calls the 'crypt()' function, which traditionally used to use only
+the first eight characters of the password. However, in modern operating
+systems this is no longer true, and in many cases the entire password is used,
+whatever its length.
+
+- cindex:['crypt16()']
+%\{crypt16\}% calls the 'crypt16()' function (also known as 'bigcrypt()'),
+which was orginally created to use up to 16 characters of the password. Again,
+in modern operating systems, more characters may be used.
+--
++
+Exim has its own version of 'crypt16()' (which is just a double call to
+'crypt()'). For operating systems that have their own version, setting
+HAVE_CRYPT16 in _Local/Makefile_ when building Exim causes it to use the
+operating system version instead of its own. This option is set by default in
+the OS-dependent _Makefile_ for those operating systems that are known to
+support 'crypt16()'.
++
+If you do not put any curly bracket encryption type in a %crypteq% comparison,
+the default is either `\{crypt\}` or `\{crypt16\}`, as determined by the
+setting of DEFAULT_CRYPT in _Local/Makefile_. The default default is
+`\{crypt\}`. Whatever the default, you can always use either function by
+specifying it explicitly in curly brackets.
++
+Note that if a password is no longer than 8 characters, the results of
+encrypting it with 'crypt()' and 'crypt16()' are identical. That means that
+'crypt16()' is backwards compatible, as long as nobody feeds it a password
+longer than 8 characters.
+
+
+*def:*<'variable~name'>*::
+cindex:[expansion,checking for empty variable]
+The %def% condition must be followed by the name of one of the expansion
+variables defined in section <<SECTexpvar>>. The condition is true if the named
+expansion variable does not contain the empty string, for example
+
+ ${if def:sender_ident {from $sender_ident}}
++
+Note that the variable name is given without a leading %\$% character. If the
+variable does not exist, the expansion fails.
+
+*def:header_*<'header~name'>*:*~~or~~*def:h_*<'header~name'>*:*::
+cindex:[expansion,checking header line existence]
+This condition is true if a message is being processed and the named header
+exists in the message. For example,
+
+ ${if def:header_reply-to:{$h_reply-to:}{$h_from:}}
++
+Note that no %\$% appears before %header_% or %h_% in the condition,
+and that header names must be terminated by colons if white space does not
+follow.
+
+*eq~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[string,comparison]
+cindex:[expansion,string comparison]
+The two substrings are first expanded. The condition is true if the two
+resulting strings are identical, including the case of letters.
+
+*eqi~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[string,comparison]
+cindex:[expansion,string comparison]
+The two substrings are first expanded. The condition is true if the two
+resulting strings are identical when compared in a case-independent way.
+
+*exists~\{*<'file~name'>*\}*::
+cindex:[expansion,file existence test]
+cindex:[file,existence test]
+The substring is first expanded and then interpreted as an absolute path. The
+condition is true if the named file (or directory) exists. The existence test
+is done by calling the 'stat()' function. The use of the %exists% test in
+users' filter files may be locked out by the system administrator.
+
+*first_delivery*::
+cindex:[delivery,first]
+cindex:[first delivery]
+cindex:[expansion,first delivery test]
+This condition, which has no data, is true during a message's first delivery
+attempt. It is false during any subsequent delivery attempts.
+
+*ge~\{*<'string1'>*\}\{*<'string2'>*\}*::
+See *gei*.
+
+*gei~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[string,comparison]
+cindex:[expansion,string comparison]
+The two substrings are first expanded. The condition is true if the first
+string is lexically greater than or equal to the second string: for %ge% the
+comparison includes the case of letters, whereas for %gei% the comparison is
+case-independent.
+
+*gt~\{*<'string1'>*\}\{*<'string2'>*\}*::
+See *gti*.
+
+*gti~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[string,comparison]
+cindex:[expansion,string comparison]
+The two substrings are first expanded. The condition is true if the first
+string is lexically greater than the second string: for %gt% the comparison
+includes the case of letters, whereas for %gti% the comparison is
+case-independent.
+
+*isip~\{*<'string'>*\}*::
+See *isip6*.
+
+*isip4~\{*<'string'>*\}*::
+See *isip6*.
+
+*isip6~\{*<'string'>*\}*::
+cindex:[IP address,testing string format]
+cindex:[string,testing for IP address]
+The substring is first expanded, and then tested to see if it has the form of
+an IP address. Both IPv4 and IPv6 addresses are valid for %isip%, whereas
+%isip4% and %isip6% test just for IPv4 or IPv6 addresses, respectively. For
+example, you could use
+
+ ${if isip4{$sender_host_address}...
++
+to test which version of IP an incoming SMTP connection is using.
+
+
+*ldapauth~\{*<'ldap~query'>*\}*::
+cindex:[LDAP,use for authentication]
+cindex:[expansion,LDAP authentication test]
+This condition supports user authentication using LDAP. See section
+<<SECTldap>> for details of how to use LDAP in lookups and the syntax of
+queries. For this use, the query must contain a user name and password. The
+query itself is not used, and can be empty. The condition is true if the
+password is not empty, and the user name and password are accepted by the LDAP
+server. An empty password is rejected without calling LDAP because LDAP binds
+with an empty password are considered anonymous regardless of the username, and
+will succeed in most configurations. See chapter <<CHAPSMTPAUTH>> for details
+of SMTP authentication, and chapter <<CHAPplaintext>> for an example of how
+this can be used.
+
+
+*le~\{*<'string1'>*\}\{*<'string2'>*\}*::
+See *lei*.
+
+*lei~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[string,comparison]
+cindex:[expansion,string comparison]
+The two substrings are first expanded. The condition is true if the first
+string is lexically less than or equal to the second string: for %le% the
+comparison includes the case of letters, whereas for %lei% the comparison is
+case-independent.
+
+*lt~\{*<'string1'>*\}\{*<'string2'>*\}*::
+See *lti*.
+
+*lti~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[string,comparison]
+cindex:[expansion,string comparison]
+The two substrings are first expanded. The condition is true if the first
+string is lexically less than the second string: for %lt% the comparison
+includes the case of letters, whereas for %lti% the comparison is
+case-independent.
+
+
+*match~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[expansion,regular expression comparison]
+cindex:[regular expressions,match in expanded string]
+The two substrings are first expanded. The second is then treated as a regular
+expression and applied to the first. Because of the pre-expansion, if the
+regular expression contains dollar, or backslash characters, they must be
+escaped. Care must also be taken if the regular expression contains braces
+(curly brackets). A closing brace must be escaped so that it is not taken as a
+premature termination of <'string2'>. The easiest approach is to use the
+`\N` feature to disable expansion of the regular expression.
+For example,
+
+ ${if match {$local_part}{\N^\d{3}\N} ...
++
+If the whole expansion string is in double quotes, further escaping of
+backslashes is also required.
++
+The condition is true if the regular expression match succeeds.
+The regular expression is not required to begin with a circumflex
+metacharacter, but if there is no circumflex, the expression is not anchored,
+and it may match anywhere in the subject, not just at the start. If you want
+the pattern to match at the end of the subject, you must include the `\$`
+metacharacter at an appropriate point.
++
+cindex:[numerical variables ($1$ $2$ etc),in %if% expansion]
+At the start of an %if% expansion the values of the numeric variable
+substitutions $1$ etc. are remembered. Obeying a %match% condition that
+succeeds causes them to be reset to the substrings of that condition and they
+will have these values during the expansion of the success string. At the end
+of the %if% expansion, the previous values are restored. After testing a
+combination of conditions using %or%, the subsequent values of the numeric
+variables are those of the condition that succeeded.
+
+*match_domain~\{*<'string1'>*\}\{*<'string2'>*\}*::
+See *match_local_part*.
+
+*match_address~\{*<'string1'>*\}\{*<'string2'>*\}*::
+See *match_local_part*.
+
+*match_local_part~\{*<'string1'>*\}\{*<'string2'>*\}*::
+cindex:[domain list,in expansion condition]
+cindex:[address list,in expansion condition]
+cindex:[local part list,in expansion condition]
+These conditions make it possible to test domain, address, and local
+part lists within expansions. Each condition requires two arguments: an item
+and a list to match. A trivial example is:
+
+ ${if match_domain{a.b.c}{x.y.z:a.b.c:p.q.r}{yes}{no}}
++
+In each case, the second argument may contain any of the allowable items for a
+list of the appropriate type. Also, because the second argument (after
+expansion) is a standard form of list, it is possible to refer to a named list.
+Thus, you can use conditions like this:
+
+ ${if match_domain{$domain}{+local_domains}{...
++
+cindex:[`+caseful`]
+For address lists, the matching starts off caselessly, but the `+caseful`
+item can be used, as in all address lists, to cause subsequent items to
+have their local parts matched casefully. Domains are always matched
+caselessly.
++
+*Note*: Host lists are 'not' supported in this way. This is because
+hosts have two identities: a name and an IP address, and it is not clear
+how to specify cleanly how such a test would work. At least, I haven't come
+up with anything yet.
+
+*pam~\{*<'string1'>*:*<'string2'>*:...\}*::
+cindex:[PAM authentication]
+cindex:[AUTH,with PAM]
+cindex:[Solaris,PAM support]
+cindex:[expansion,PAM authentication test]
+'Pluggable Authentication Modules'
+(*http://www.kernel.org/pub/linux/libs/pam/[]*)
+are a facility that is available in the latest releases of Solaris and in some
+GNU/Linux distributions. The Exim support, which is intended for use in
+conjunction with the SMTP AUTH command, is available only if Exim is
+compiled with
+
+ SUPPORT_PAM=yes
++
+in _Local/Makefile_. You probably need to add %-lpam% to EXTRALIBS, and
+in some releases of GNU/Linux %-ldl% is also needed.
++
+The argument string is first expanded, and the result must be a
+colon-separated list of strings. Leading and trailing whitespace is ignored.
+The PAM module is initialized with the service name ``exim'' and the user name
+taken from the first item in the colon-separated data string (<'string1'>). The
+remaining items in the data string are passed over in response to requests from
+the authentication function. In the simple case there will only be one request,
+for a password, so the data consists of just two strings.
++
+There can be problems if any of the strings are permitted to contain colon
+characters. In the usual way, these have to be doubled to avoid being taken as
+separators. If the data is being inserted from a variable, the %sg% expansion
+item can be used to double any existing colons. For example, the configuration
+of a LOGIN authenticator might contain this setting:
+
+ server_condition = ${if pam{$1:${sg{$2}{:}{::}}}{yes}{no}}
++
+For a PLAIN authenticator you could use:
+
+ server_condition = ${if pam{$2:${sg{$3}{:}{::}}}{yes}{no}}
++
+In some operating systems, PAM authentication can be done only from a process
+running as root. Since Exim is running as the Exim user when receiving
+messages, this means that PAM cannot be used directly in those systems.
+A patched version of the 'pam_unix' module that comes with the
+Linux PAM package is available from *http://www.e-admin.de/pam_exim/[]*.
+The patched module allows one special uid/gid combination, in addition to root,
+to authenticate. If you build the patched module to allow the Exim user and
+group, PAM can then be used from an Exim authenticator.
+
+
+*pwcheck~\{*<'string1'>*:*<'string2'>*\}*::
+cindex:['pwcheck' daemon]
+cindex:[Cyrus]
+cindex:[expansion,'pwcheck' authentication test]
+This condition supports user authentication using the Cyrus 'pwcheck' daemon.
+This is one way of making it possible for passwords to be checked by a process
+that is not running as root. *Note:* The use of 'pwcheck' is now deprecated.
+Its replacement is 'saslauthd' (see below).
++
+The pwcheck support is not included in Exim by default. You need to specify
+the location of the pwcheck daemon's socket in _Local/Makefile_ before
+building Exim. For example:
+
+ CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck
++
+You do not need to install the full Cyrus software suite in order to use
+the pwcheck daemon. You can compile and install just the daemon alone
+from the Cyrus SASL library. Ensure that 'exim' is the only user that has
+access to the _/var/pwcheck_ directory.
++
+The %pwcheck% condition takes one argument, which must be the user name and
+password, separated by a colon. For example, in a LOGIN authenticator
+configuration, you might have this:
+
+ server_condition = ${if pwcheck{$1:$2}{1}{0}}
+
+
+*queue_running*::
+cindex:[queue runner,detecting when delivering from]
+cindex:[expansion,queue runner test]
+This condition, which has no data, is true during delivery attempts that are
+initiated by queue runner processes, and false otherwise.
+
+
+*radius~\{*<'authentication~string'>*\}*::
+cindex:[Radius]
+cindex:[expansion,Radius authentication]
+Radius authentication (RFC 2865) is supported in a similar way to PAM. You must
+set RADIUS_CONFIG_FILE in _Local/Makefile_ to specify the location of
+the Radius client configuration file in order to build Exim with Radius
+support.
++
+With just that one setting, Exim expects to be linked with the %radiusclient%
+library. You can also link Exim with the %libradius% library that comes with
+FreeBSD. To do this, set
+
+ RADIUS_LIB_TYPE=RADLIB
++
+in _Local/Makefile_, in addition to setting RADIUS_CONFIGURE_FILE.
+You may also have to supply a suitable setting in EXTRALIBS so that the
+Radius library can be found when Exim is linked.
++
+The string specified by RADIUS_CONFIG_FILE is expanded and passed to the
+Radius client library, which calls the Radius server. The condition is true if
+the authentication is successful. For example
+
+ server_condition = \$\{if radius\{<arguments>\}\{yes\}\{no\}\}
+
+
+
+
+*saslauthd~\{\{*<'user'>*\}\{*<'password'>*\}\{*<'service'>*\}\{*<'realm'>*\}\}*::
+cindex:['saslauthd' daemon]
+cindex:[Cyrus]
+cindex:[expansion,'saslauthd' authentication test]
+This condition supports user authentication using the Cyrus 'saslauthd'
+daemon. This replaces the older 'pwcheck' daemon, which is now deprecated.
+Using this daemon is one way of making it possible for passwords to be checked
+by a process that is not running as root.
++
+The saslauthd support is not included in Exim by default. You need to specify
+the location of the saslauthd daemon's socket in _Local/Makefile_ before
+building Exim. For example:
+
+ CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
++
+You do not need to install the full Cyrus software suite in order to use
+the saslauthd daemon. You can compile and install just the daemon alone
+from the Cyrus SASL library.
++
+Up to four arguments can be supplied to the %saslauthd% condition, but only two
+are mandatory. For example:
+
+ server_condition = ${if saslauthd{{$1}{$2}}{1}{0}}
++
+The service and the realm are optional (which is why the arguments are enclosed
+in their own set of braces). For details of the meaning of the service and
+realm, and how to run the daemon, consult the Cyrus documentation.
+
+
+
+Combining expansion conditions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[expansion,combining conditions]
+Several conditions can be tested at once by combining them using the %and% and
+%or% combination conditions. Note that %and% and %or% are complete conditions
+on their own, and precede their lists of sub-conditions. Each sub-condition
+must be enclosed in braces within the overall braces that contain the list. No
+repetition of %if% is used.
+
+
+*or~\{\{*<'cond1'>*\}\{*<'cond2'>*\}...\}*::
+cindex:[``or'' expansion condition]
+cindex:[expansion,``or'' of conditions]
+The sub-conditions are evaluated from left to right. The condition is true if
+any one of the sub-conditions is true.
+For example,
+
+ ${if or {{eq{$local_part}{spqr}}{eq{$domain}{testing.com}}}...
++
+When a true sub-condition is found, the following ones are parsed but not
+evaluated. If there are several ``match'' sub-conditions the values of the
+numeric variables afterwards are taken from the first one that succeeds.
+
+*and~\{\{*<'cond1'>*\}\{*<'cond2'>*\}...\}*::
+cindex:[``and'' expansion condition]
+cindex:[expansion,``and'' of conditions]
+The sub-conditions are evaluated from left to right. The condition is true if
+all of the sub-conditions are true. If there are several ``match''
+sub-conditions, the values of the numeric variables afterwards are taken from
+the last one. When a false sub-condition is found, the following ones are
+parsed but not evaluated.
+
+
+
+
+[[SECTexpvar]]
+Expansion variables
+~~~~~~~~~~~~~~~~~~~
+cindex:[expansion variables, list of]
+This section contains an alphabetical list of all the expansion variables. Some
+of them are available only when Exim is compiled with specific options such as
+support for TLS or the content scanning extension.
+
+$0$, $1$, etc::
+cindex:[numerical variables ($1$ $2$ etc)]
+When a %match% expansion condition succeeds, these variables contain the
+captured substrings identified by the regular expression during subsequent
+processing of the success string of the containing %if% expansion item. They
+may also be set externally by some other matching process which precedes the
+expansion of the string. For example, the commands available in Exim filter
+files include an %if% command with its own regular expression matching
+condition.
+
+$acl_c0$ -- $acl_c9$::
+Values can be placed in these variables by the %set% modifier in an ACL. The
+values persist throughout the lifetime of an SMTP connection. They can be used
+to pass information between ACLs and different invocations of the same ACL.
+When a message is received, the values of these variables are saved with the
+message, and can be accessed by filters, routers, and transports during
+subsequent delivery.
+
+$acl_m0$ -- $acl_m9$::
+Values can be placed in these variables by the %set% modifier in an ACL. They
+retain their values while a message is being received, but are reset
+afterwards. They are also reset by MAIL, RSET, EHLO, HELO, and after starting a
+TLS session. When a message is received, the values of these variables are
+saved with the message, and can be accessed by filters, routers, and transports
+during subsequent delivery.
+
+$acl_verify_message$::
+During the expansion of the %message% and %log_message% modifiers in an ACL
+statement after an address verification has failed, this variable contains the
+original failure message that will be overridden by the expanded string.
+
+$address_data$::
+This variable is set by means of the %address_data% option in routers. The
+value then remains with the address while it is processed by subsequent routers
+and eventually a transport. If the transport is handling multiple addresses,
+the value from the first address is used. See chapter <<CHAProutergeneric>> for
+more details. *Note*: the contents of $address_data$ are visible in user filter
+files.
++
+If $address_data$ is set when the routers are called from an ACL to verify
+a recipient address, the final value is still in the variable for subsequent
+conditions and modifiers of the ACL statement. If routing the address caused it
+to be redirected to just one address, the child address is also routed as part
+of the verification, and in this case the final value of $address_data$ is
+from the child's routing.
++
+If $address_data$ is set when the routers are called from an ACL to verify a
+sender address, the final value is also preserved, but this time in
+$sender_address_data$, to distinguish it from data from a recipient
+address.
++
+In both cases (recipient and sender verification), the value does not persist
+after the end of the current ACL statement. If you want to preserve
+these values for longer, you can save them in ACL variables.
+
+$address_file$::
+When, as a result of aliasing, forwarding, or filtering, a message is directed
+to a specific file, this variable holds the name of the file when the transport
+is running. At other times, the variable is empty. For example, using the
+default configuration, if user %r2d2% has a _.forward_ file containing
+
+ /home/r2d2/savemail
++
+then when the ^address_file^ transport is running, $address_file$
+contains ``/home/r2d2/savemail''.
++
+cindex:[Sieve filter,value of $address_file$]
+For Sieve filters, the value may be ``inbox'' or a relative folder name. It is
+then up to the transport configuration to generate an appropriate absolute path
+to the relevant file.
+
+$address_pipe$::
+When, as a result of aliasing or forwarding, a message is directed to a pipe,
+this variable holds the pipe command when the transport is running.
+
+$authenticated_id$::
+cindex:[authentication,id]
+When a server successfully authenticates a client it may be configured to
+preserve some of the authentication information in the variable
+$authenticated_id$ (see chapter <<CHAPSMTPAUTH>>). For example, a user/password
+authenticator configuration might preserve the user name for use in the
+routers. When a message is submitted locally (that is, not over a TCP
+connection), the value of $authenticated_id$ is the login name of the calling
+process.
+
+$authenticated_sender$::
+cindex:[sender,authenticated]
+cindex:[authentication,sender]
+cindex:[AUTH,on MAIL command]
+When acting as a server, Exim takes note of the AUTH= parameter on an incoming
+SMTP MAIL command if it believes the sender is sufficiently trusted, as
+described in section <<SECTauthparamail>>. Unless the data is the string
+``<>'', it is set as the authenticated sender of the message, and the value is
+available during delivery in the $authenticated_sender$ variable. If the sender
+is not trusted, Exim accepts the syntax of AUTH=, but ignores the data.
++
+When a message is submitted locally (that is, not over a TCP connection), the
+value of $authenticated_sender$ is an address constructed from the login
+name of the calling process and $qualify_domain$.
+
+
+$authentication_failed$::
+cindex:[authentication,failure]
+This variable is set to ``1'' in an Exim server if a client issues an AUTH
+command that does not succeed. Otherwise it is set to ``0''. This makes it
+possible to distinguish between ``did not try to authenticate''
+($sender_host_authenticated$ is empty and $authentication_failed$ is set to
+``0'') and ``tried to authenticate but failed'' ($sender_host_authenticated$ is
+empty and $authentication_failed$ is set to ``1''). Failure includes any
+negative response to an AUTH command, including (for example) an attempt to use
+an undefined mechanism.
+
+$body_linecount$::
+cindex:[message body, line count]
+cindex:[body of message,line count]
+When a message is being received or delivered, this variable contains the
+number of lines in the message's body.
+
+$body_zerocount$::
+cindex:[message body, binary zero count]
+cindex:[body of message,binary zero count]
+cindex:[binary zero,in message body]
+When a message is being received or delivered, this variable contains the
+number of binary zero bytes in the message's body.
+
+$bounce_recipient$::
+This is set to the recipient address of a bounce message while Exim is creating
+it. It is useful if a customized bounce message text file is in use (see
+chapter <<CHAPemsgcust>>).
+
+$bounce_return_size_limit$::
+This contains the value set in the %bounce_return_size_limit% option, rounded
+up to a multiple of 1000. It is useful when a customized error message text
+file is in use (see chapter <<CHAPemsgcust>>).
+
+$caller_gid$::
+cindex:[gid (group id),caller]
+The real group id under which the process that called Exim was running. This is
+not the same as the group id of the originator of a message (see
+$originator_gid$). If Exim re-execs itself, this variable in the new
+incarnation normally contains the Exim gid.
+
+$caller_uid$::
+cindex:[uid (user id),caller]
+The real user id under which the process that called Exim was running. This is
+not the same as the user id of the originator of a message (see
+$originator_uid$). If Exim re-execs itself, this variable in the new
+incarnation normally contains the Exim uid.
+
+$compile_date$::
+The date on which the Exim binary was compiled.
+
+$compile_number$::
+The building process for Exim keeps a count of the number
+of times it has been compiled. This serves to distinguish different
+compilations of the same version of the program.
+
+$demime_errorlevel$::
+This variable is available when Exim is compiled with
+the content-scanning extension and the obsolete %demime% condition. For
+details, see section <<SECTdemimecond>>.
+
+$demime_reason$::
+This variable is available when Exim is compiled with the
+content-scanning extension and the obsolete %demime% condition. For details,
+see section <<SECTdemimecond>>.
+
+
+$dnslist_domain$::
+cindex:[black list (DNS)]
+When a client host is found to be on a DNS (black) list,
+the list's domain name is put into this variable so that it can be included in
+the rejection message.
+
+$dnslist_text$::
+When a client host is found to be on a DNS (black) list, the
+contents of any associated TXT record are placed in this variable.
+
+$dnslist_value$::
+When a client host is found to be on a DNS (black) list,
+the IP address from the resource record is placed in this variable.
+If there are multiple records, all the addresses are included, comma-space
+separated.
+
+$domain$::
+When an address is being routed, or delivered on its own, this
+variable contains the domain. Global address rewriting happens when a message
+is received, so the value of $domain$ during routing and delivery is the
+value after rewriting. $domain$ is set during user filtering, but not during
+system filtering, because a message may have many recipients and the system
+filter is called just once.
++
+When more than one address is being delivered at once (for example, several
+RCPT commands in one SMTP delivery), $domain$ is set only if they all
+have the same domain. Transports can be restricted to handling only one domain
+at a time if the value of $domain$ is required at transport time -- this is
+the default for local transports. For further details of the environment in
+which local transports are run, see chapter <<CHAPenvironment>>.
++
+cindex:[%delay_warning_condition%]
+At the end of a delivery, if all deferred addresses have the same domain, it is
+set in $domain$ during the expansion of %delay_warning_condition%.
++
+The $domain$ variable is also used in some other circumstances:
+
+- When an ACL is running for a RCPT command, $domain$ contains the domain
+of the recipient address.
+*Note:* the domain of the sender address is in $sender_address_domain$
+at MAIL time and at RCPT time. $domain$ is not set for the MAIL
+ACL.
+
+- When a rewrite item is being processed (see chapter <<CHAPrewrite>>), $domain$
+contains the domain portion of the address that is being rewritten; it can be
+used in the expansion of the replacement address, for example, to rewrite
+domains by file lookup.
+
+- With one important exception, whenever a domain list is being scanned,
+$domain$ contains the subject domain. *Exception*: When a domain list in
+a %sender_domains% condition in an ACL is being processed, the subject domain
+is in $sender_address_domain$ and not in $domain$. It works this way so
+that, in a RCPT ACL, the sender domain list can be dependent on the
+recipient domain (which is what is in $domain$ at this time).
+
+- cindex:[ETRN,value of $domain$]
+cindex:[%smtp_etrn_command%]
+When the %smtp_etrn_command% option is being expanded, $domain$ contains
+the complete argument of the ETRN command (see section <<SECTETRN>>).
+
+
+$domain_data$::
+When the %domains% option on a router matches a domain by
+means of a lookup, the data read by the lookup is available during the running
+of the router as $domain_data$. In addition, if the driver routes the
+address to a transport, the value is available in that transport. If the
+transport is handling multiple addresses, the value from the first address is
+used.
++
+$domain_data$ is also set when the %domains% condition in an ACL matches a
+domain by means of a lookup. The data read by the lookup is available during
+the rest of the ACL statement. In all other situations, this variable expands
+to nothing.
+
+$exim_gid$::
+This variable contains the numerical value of the Exim group id.
+
+$exim_path$::
+This variable contains the path to the Exim binary.
+
+$exim_uid$::
+This variable contains the numerical value of the Exim user id.
+
+$found_extension$::
+This variable is available when Exim is compiled with the
+content-scanning extension and the obsolete %demime% condition. For details,
+see section <<SECTdemimecond>>.
+
+$header_$<'name'>::
+This is not strictly an expansion variable. It is
+expansion syntax for inserting the message header line with the given name.
+Note that the name must be terminated by colon or white space, because it may
+contain a wide variety of characters.
+Note also that braces must 'not' be used.
+
+$home$::
+When the %check_local_user% option is set for a router, the user's home
+directory is placed in $home$ when the check succeeds. In particular, this
+means it is set during the running of users' filter files. A router may also
+explicitly set a home directory for use by a transport; this can be overridden
+by a setting on the transport itself.
++
+When running a filter test via the %-bf% option, $home$ is set to the value
+of the environment variable HOME.
+
+$host$::
+When the ^smtp^ transport is expanding its options for encryption using TLS,
+$host$ contains the name of the host to which it is connected. Likewise, when
+used in the client part of an authenticator configuration (see chapter
+<<CHAPSMTPAUTH>>), $host$ contains the name of the server to which the client
+is connected.
++
+cindex:[transport,filter]
+cindex:[filter,transport filter]
+When used in a transport filter (see chapter <<CHAPtransportgeneric>>) $host$
+refers to the host involved in the current connection. When a local transport
+is run as a result of a router that sets up a host list, $host$ contains the
+name of the first host.
+
+$host_address$::
+This variable is set to the remote host's IP address whenever $host$ is set for
+a remote connection. It is also set to the IP address that is being checked
+when the %ignore_target_hosts% option is being processed.
+
+$host_data$::
+If a %hosts% condition in an ACL is satisfied by means of a lookup, the result
+of the lookup is made available in the $host_data$ variable. This
+allows you, for example, to do things like this:
+
+ deny hosts = net-lsearch;/some/file
+ message = $host_data
+
+
+$host_lookup_deferred$::
+cindex:[host name lookup, failure of]
+This variable normally contains ``0'', as does $host_lookup_failed$. When a
+message comes from a remote host and there is an attempt to look up the host's
+name from its IP address, and the attempt is not successful, one of these
+variables is set to ``1''.
++
+--
+- If the lookup receives a definite negative response (for example, a DNS lookup
+succeeded, but no records were found), $host_lookup_failed$ is set to ``1''.
+
+- If there is any kind of problem during the lookup, such that Exim cannot
+tell whether or not the host name is defined (for example, a timeout for a DNS
+lookup), $host_lookup_deferred$ is set to ``1''.
+--
++
+Looking up a host's name from its IP address consists of more than just a
+single reverse lookup. Exim checks that a forward lookup of at least one of the
+names it receives from a reverse lookup yields the original IP address. If this
+is not the case, Exim does not accept the looked up name(s), and
+$host_lookup_failed$ is set to ``1''. Thus, being able to find a name from an
+IP address (for example, the existence of a PTR record in the DNS) is not
+sufficient on its own for the success of a host name lookup. If the reverse
+lookup succeeds, but there is a lookup problem such as a timeout when checking
+the result, the name is not accepted, and $host_lookup_deferred$ is set to
+``1''. See also $sender_host_name$.
+
+$host_lookup_failed$::
+See $host_lookup_deferred$.
+
+
+$inode$::
+The only time this variable is set is while expanding the %directory_file%
+option in the ^appendfile^ transport. The variable contains the inode number
+of the temporary file which is about to be renamed. It can be used to construct
+a unique name for the file.
+
+$interface_address$::
+When a message is received over a TCP/IP connection, this variable contains the
+address of the local IP interface. See also the %-oMi% command line option.
+This variable can be used in ACLs and also, for example, to make the file name
+for a TLS certificate depend on which interface is being used.
+
+$interface_port$::
+When a message is received over a TCP/IP connection, this variable contains the
+local port number. See also the %-oMi% command line option.
+This variable can be used in ACLs and also, for example, to make the file name
+for a TLS certificate depend on which port is being used.
+
+$ldap_dn$::
+This variable, which is available only when Exim is compiled with LDAP support,
+contains the DN from the last entry in the most recently successful LDAP
+lookup.
+
+$load_average$::
+This variable contains the system load average, multiplied by 1000 to that it
+is an integer. For example, if the load average is 0.21, the value of the
+variable is 210. The value is recomputed every time the variable is referenced.
+
+$local_part$::
+When an address is being routed, or delivered on its own, this
+variable contains the local part. When a number of addresses are being
+delivered together (for example, multiple RCPT commands in an SMTP
+session), $local_part$ is not set.
++
+Global address rewriting happens when a message is received, so the value of
+$local_part$ during routing and delivery is the value after rewriting.
+$local_part$ is set during user filtering, but not during system filtering,
+because a message may have many recipients and the system filter is called just
+once.
++
+If a local part prefix or suffix has been recognized, it is not included in the
+value of $local_part$ during routing and subsequent delivery. The values of
+any prefix or suffix are in $local_part_prefix$ and
+$local_part_suffix$, respectively.
++
+When a message is being delivered to a file, pipe, or autoreply transport as a
+result of aliasing or forwarding, $local_part$ is set to the local part of
+the parent address, not to the file name or command (see $address_file$ and
+$address_pipe$).
++
+When an ACL is running for a RCPT command, $local_part$ contains the
+local part of the recipient address.
++
+When a rewrite item is being processed (see chapter <<CHAPrewrite>>),
+$local_part$ contains the local part of the address that is being rewritten;
+it can be used in the expansion of the replacement address, for example.
++
+In all cases, all quoting is removed from the local part. For example, for both
+the addresses
+
+ "abc:xyz"@test.example
+ abc\:xyz@test.example
++
+the value of $local_part$ is
+
+ abc:xyz
++
+If you use $local_part$ to create another address, you should always wrap it
+inside a quoting operator. For example, in a ^redirect^ router you could have:
+
+ data = ${quote_local_part:$local_part}@new.domain.example
++
+*Note*: The value of $local_part$ is normally lower cased. If you want
+to process local parts in a case-dependent manner in a router, you can set the
+%caseful_local_part% option (see chapter <<CHAProutergeneric>>).
+
+$local_part_data$::
+When the %local_parts% option on a router matches a local part by means of a
+lookup, the data read by the lookup is available during the running of the
+router as $local_part_data$. In addition, if the driver routes the address
+to a transport, the value is available in that transport. If the transport is
+handling multiple addresses, the value from the first address is used.
++
+$local_part_data$ is also set when the %local_parts% condition in an ACL
+matches a local part by means of a lookup. The data read by the lookup is
+available during the rest of the ACL statement. In all other situations, this
+variable expands to nothing.
+
+$local_part_prefix$::
+When an address is being routed or delivered, and a
+specific prefix for the local part was recognized, it is available in this
+variable, having been removed from $local_part$.
+
+$local_part_suffix$::
+When an address is being routed or delivered, and a
+specific suffix for the local part was recognized, it is available in this
+variable, having been removed from $local_part$.
+
+$local_scan_data$::
+This variable contains the text returned by the 'local_scan()' function when a
+message is received. See chapter <<CHAPlocalscan>> for more details.
+
+$local_user_gid$::
+See $local_user_uid$.
+
+$local_user_uid$::
+This variable and $local_user_gid$ are set to
+the uid and gid after the %check_local_user% router precondition succeeds.
+This means that their values are available for the remaining preconditions
+(%senders%, %require_files%, and %condition%), for the %address_data%
+expansion, and for any router-specific expansions. At all other times, the
+values in these variables are `(uid_t)(-1)` and `(gid_t)(-1)`,
+respectively.
+
+$localhost_number$::
+This contains the expanded value of the
+%localhost_number% option. The expansion happens after the main options have
+been read.
+
+$log_inodes$::
+The number of free inodes in the disk partition where Exim's
+log files are being written. The value is recalculated whenever the variable is
+referenced. If the relevant file system does not have the concept of inodes,
+the value of is -1. See also the %check_log_inodes% option.
+
+$log_space$::
+The amount of free space (as a number of kilobytes) in the disk
+partition where Exim's log files are being written. The value is recalculated
+whenever the variable is referenced. If the operating system does not have the
+ability to find the amount of free space (only true for experimental systems),
+the space value is -1. See also the %check_log_space% option.
+
+
+$mailstore_basename$::
+This variable is set only when doing deliveries in
+``mailstore'' format in the ^appendfile^ transport. During the expansion of the
+%mailstore_prefix%, %mailstore_suffix%, %message_prefix%, and
+%message_suffix% options, it contains the basename of the files that are being
+written, that is, the name without the ``.tmp'', ``.env'', or ``.msg'' suffix. At all
+other times, this variable is empty.
+
+$malware_name$::
+This variable is available when Exim is compiled with the
+content-scanning extension. It is set to the name of the virus that was found
+when the ACL %malware% condition is true (see section <<SECTscanvirus>>).
+
+
+$message_age$::
+cindex:[message,age of]
+This variable is set at the start of a delivery attempt to
+contain the number of seconds since the message was received. It does not
+change during a single delivery attempt.
+
+$message_body$::
+cindex:[body of message,expansion variable]
+cindex:[message body, in expansion]
+cindex:[binary zero,in message body]
+This variable contains the initial portion of a message's
+body while it is being delivered, and is intended mainly for use in filter
+files. The maximum number of characters of the body that are put into the
+variable is set by the %message_body_visible% configuration option; the
+default is 500. Newlines are converted into spaces to make it easier to search
+for phrases that might be split over a line break.
+Binary zeros are also converted into spaces.
+
+$message_body_end$::
+cindex:[body of message,expansion variable]
+cindex:[message body, in expansion]
+This variable contains the final portion of a message's
+body while it is being delivered. The format and maximum size are as for
+$message_body$.
+
+$message_body_size$::
+cindex:[body of message,size]
+cindex:[message body, size]
+When a message is being delivered, this variable
+contains the size of the body in bytes. The count starts from the character
+after the blank line that separates the body from the header. Newlines are
+included in the count. See also $message_size$, $body_linecount$, and
+$body_zerocount$.
+
+$message_headers$::
+This variable contains a concatenation of all the header lines when a message
+is being processed, except for lines added by routers or transports. The header
+lines are separated by newline characters.
+
+$message_id$::
+When a message is being received or delivered, this variable contains the
+unique message id that is used by Exim to identify the message.
+An id is not created for a message until after its header has been
+successfully received.
+*Note*: This is 'not' the contents of the 'Message-ID:' header line; it
+is the local id that Exim assigns to the message, for example:
+`1BXTIK-0001yO-VA`.
+
+$message_size$::
+cindex:[size,of message]
+cindex:[message,size]
+When a message is being processed, this variable contains its size in bytes. In
+most cases, the size includes those headers that were received with the
+message, but not those (such as 'Envelope-to:') that are added to individual
+deliveries as they are written. However, there is one special case: during the
+expansion of the %maildir_tag% option in the ^appendfile^ transport while
+doing a delivery in maildir format, the value of $message_size$ is the
+precise size of the file that has been written. See also
+$message_body_size$, $body_linecount$, and $body_zerocount$.
++
+cindex:[RCPT,value of $message_size$]
+While running an ACL at the time of an SMTP RCPT command, $message_size$
+contains the size supplied on the MAIL command, or -1 if no size was given. The
+value may not, of course, be truthful.
+
+$mime_$'xxx'::
+A number of variables whose names start with $mime$ are
+available when Exim is compiled with the content-scanning extension. For
+details, see section <<SECTscanmimepart>>.
+
+
+$n0$ -- $n9$::
+These variables are counters that can be incremented by means
+of the %add% command in filter files.
+
+$original_domain$::
+When a top-level address is being processed for delivery,
+this contains the same value as $domain$. However, if a ``child'' address (for
+example, generated by an alias, forward, or filter file) is being processed,
+this variable contains the domain of the original address. This differs from
+$parent_domain$ only when there is more than one level of aliasing or
+forwarding. When more than one address is being delivered in a single transport
+run, $original_domain$ is not set.
++
+If new an address is created by means of a %deliver% command in a system
+filter, it is set up with an artificial ``parent'' address. This has the local
+part 'system-filter' and the default qualify domain.
+
+$original_local_part$::
+When a top-level address is being processed for
+delivery, this contains the same value as $local_part$, unless a prefix or
+suffix was removed from the local part, because $original_local_part$
+always contains the full local part. When a ``child'' address (for example,
+generated by an alias, forward, or filter file) is being processed, this
+variable contains the full local part of the original address.
++
+If the router that did the redirection processed the local part
+case-insensitively, the value in $original_local_part$ is in lower case.
+This variable differs from $parent_local_part$ only when there is more than
+one level of aliasing or forwarding. When more than one address is being
+delivered in a single transport run, $original_local_part$ is not set.
++
+If new an address is created by means of a %deliver% command in a system
+filter, it is set up with an artificial ``parent'' address. This has the local
+part 'system-filter' and the default qualify domain.
+
+
+$originator_gid$::
+cindex:[gid (group id),of originating user]
+cindex:[sender,gid]
+The value of $caller_gid$ that was set when the message
+was received. For messages received via the command line, this is the gid of
+the sending user. For messages received by SMTP over TCP/IP, this is normally
+the gid of the Exim user.
+
+$originator_uid$::
+cindex:[uid (user id),of originating user]
+cindex:[sender,uid]
+The value of $caller_uid$ that was set when the message
+was received. For messages received via the command line, this is the uid of
+the sending user. For messages received by SMTP over TCP/IP, this is normally
+the uid of the Exim user.
+
+$parent_domain$::
+This variable is similar to $original_domain$ (see
+above), except that it refers to the immediately preceding parent address.
+
+$parent_local_part$::
+This variable is similar to $original_local_part$
+(see above), except that it refers to the immediately preceding parent address.
+
+$pid$::
+cindex:[pid (process id),of current process]
+This variable contains the current process id.
+
+$pipe_addresses$::
+cindex:[filter,transport filter]
+cindex:[transport,filter]
+This is not an expansion variable, but is mentioned here
+because the string ``\$pipe_addresses'' is handled specially in the command
+specification for the ^pipe^ transport (chapter <<CHAPpipetransport>>) and in
+transport filters (described under %transport_filter% in chapter
+<<CHAPtransportgeneric>>). It cannot be used in general expansion strings, and
+provokes an ``unknown variable'' error if encountered.
+
+$primary_hostname$::
+The value set in the configuration file, or read by the
+'uname()' function. If 'uname()' returns a single-component name, Exim
+calls 'gethostbyname()' (or 'getipnodebyname()' where available) in an
+attempt to acquire a fully qualified host name.
+See also $smtp_active_hostname$.
+
+$qualify_domain$::
+The value set for this option in the configuration file.
+
+$qualify_recipient$::
+The value set for this option in the configuration file,
+or if not set, the value of $qualify_domain$.
+
+$rcpt_count$::
+When a message is being received by SMTP, this variable
+contains the number of RCPT commands received for the current message. If
+this variable is used in a RCPT ACL, its value includes the current
+command.
+
+$rcpt_defer_count$::
+When a message is being received by SMTP, this variable
+contains the number of RCPT commands in the current message that have
+previously been rejected with a temporary (4##'xx') response.
+
+$rcpt_fail_count$::
+When a message is being received by SMTP, this variable
+contains the number of RCPT commands in the current message that have
+previously been rejected with a permanent (5##'xx') response.
+
+$received_count$::
+This variable contains the number of 'Received:' header
+lines in the message, including the one added by Exim (so its value is always
+greater than zero). It is available in the DATA ACL, the non-SMTP ACL, and
+while routing and delivering.
+
+$received_for$::
+If there is only a single recipient address in an incoming
+message, this variable contains that address when the 'Received:' header line
+is being built.
+The value is copied after recipient rewriting has happened, but before the
+'local_scan()' function is run.
+
+$received_protocol$::
+When a message is being processed, this variable
+contains the name of the protocol by which it was received.
+Most of the names used by Exim are defined by RFCs 821, 2821, and 3848. They
+start with ``smtp'' (the client used HELO) or ``esmtp'' (the client used
+EHLO). This can be followed by ``s'' for secure (encrypted) and/or ``a'' for
+authenticated. Thus, for example, if the protocol is set to ``esmtpsa'', the
+message was received over an encrypted SMTP connection and the client was
+successfully authenticated.
++
+Exim uses the protocol name ``smtps'' for the case when encryption is
+automatically set up on connection without the use of STARTTLS (see
+%tls_on_connect_ports%), and the client uses HELO to initiate the
+encrypted SMTP session. The name ``smtps'' is also used for the rare situation
+where the client initially uses EHLO, sets up an encrypted connection using
+STARTTLS, and then uses HELO afterwards.
++
+The %-oMr% option provides a way of specifying a custom protocol name for
+messages that are injected locally by trusted callers. This is commonly used to
+identify messages that are being re-injected after some kind of scanning.
+
+
+$recipient_data$::
+This variable is set after an indexing lookup success in
+an ACL %recipients% condition. It contains the data from the lookup, and the
+value remains set until the next %recipients% test. Thus, you can do things
+like this:
++
+&&&
+`require recipients = cdb*@;/some/file`
+`deny `'some further test involving' `\$recipient_data`
+&&&
++
+*Warning*: This variable is set only when a lookup is used as an indexing
+method in the address list, using the semicolon syntax as in the example above.
+The variable is not set for a lookup that is used as part of the string
+expansion that all such lists undergo before being interpreted.
+
+$recipient_verify_failure$::
+In an ACL, when a recipient verification fails,
+this variable contains information about the failure. It is set to one of the
+following words:
++
+--
+- ``qualify'': The address was unqualified (no domain), and the message
+was neither local nor came from an exempted host.
+
+- ``route'': Routing failed.
+
+- ``mail'': Routing succeeded, and a callout was attempted; rejection occurred at
+or before the MAIL command (that is, on initial connection, HELO, or
+MAIL).
+
+- ``recipient'': The RCPT command in a callout was rejected.
+
+- ``postmaster'': The postmaster check in a callout was rejected.
+--
++
+The main use of this variable is expected to be to distinguish between
+rejections of MAIL and rejections of RCPT.
+
+
+$recipients$::
+This variable contains a list of envelope recipients for a
+message. A comma and a space separate the addresses in the replacement text.
+However, the variable is not generally available, to prevent exposure of Bcc
+recipients in unprivileged users' filter files. You can use $recipients$ only
+in these two cases:
+
+. In a system filter file.
+
+. In the ACLs associated with the DATA command, that is, the ACLs defined by
+%acl_smtp_predata% and %acl_smtp_data%.
+
+
+$recipients_count$::
+When a message is being processed, this variable
+contains the number of envelope recipients that came with the message.
+Duplicates are not excluded from the count. While a message is being received
+over SMTP, the number increases for each accepted recipient. It can be
+referenced in an ACL.
+
+$reply_address$::
+When a message is being processed, this variable contains
+the contents of the 'Reply-To:' header line if one exists
+and it is not empty,
+or otherwise the contents of the 'From:' header line.
+
+$return_path$::
+When a message is being delivered, this variable contains the return path --
+the sender field that will be sent as part of the envelope. It is not enclosed
+in <> characters. At the start of routing an address, $return_path$ has the
+same value as $sender_address$, but if, for example, an incoming message to a
+mailing list has been expanded by a router which specifies a different address
+for bounce messages, $return_path$ subsequently contains the new bounce
+address, whereas $sender_address$ always contains the original sender address
+that was received with the message. In other words, $sender_address$ contains
+the incoming envelope sender, and $return_path$ contains the outgoing envelope
+sender.
+
+$return_size_limit$::
+This is an obsolete name for $bounce_return_size_limit$.
+
+$runrc$::
+cindex:[return code,from %run% expansion]
+This variable contains the return code from a command that is run by the
+%\$\{run...\}% expansion item. *Warning*: In a router or transport, you cannot
+assume the order in which option values are expanded, except for those
+pre-conditions whose order of testing is documented. Therefore, you cannot
+reliably expect to set $runrc$ by the expansion of one option, and use it in
+another.
+
+$self_hostname$::
+When an address is routed to a supposedly remote host that turns out to be the
+local host, what happens is controlled by the
+cindex:[%self% option,value of host name]
+%self% generic router option. One of its values causes the address to be passed
+to another router. When this happens, $self_hostname$ is set to the name of
+the local host that the original router encountered. In other circumstances its
+contents are null.
+
+$sender_address$::
+When a message is being processed, this variable contains
+the sender's address that was received in the message's envelope. For bounce
+messages, the value of this variable is the empty string.
+See also $return_path$.
+
+$sender_address_data$::
+If $address_data$ is set when the routers are called from an ACL to verify a
+sender address, the final value is preserved in $sender_address_data$, to
+distinguish it from data from a recipient address. The value does not persist
+after the end of the current ACL statement. If you want to preserve it for
+longer, you can save it in an ACL variable.
+
+
+$sender_address_domain$::
+The domain portion of $sender_address$.
+
+$sender_address_local_part$::
+The local part portion of $sender_address$.
+
+$sender_data$::
+This variable is set after a lookup success in an ACL %senders% condition or in
+a router %senders% option. It contains the data from the lookup, and the value
+remains set until the next %senders% test. Thus, you can do things like this:
++
+&&&
+`require senders = cdb*@;/some/file`
+`deny `'some further test involving' `\$sender_data`
+&&&
++
+*Warning*: This variable is set only when a lookup is used as an indexing
+method in the address list, using the semicolon syntax as in the example above.
+The variable is not set for a lookup that is used as part of the string
+expansion that all such lists undergo before being interpreted.
+
+$sender_fullhost$::
+When a message is received from a remote host, this variable contains the host
+name and IP address in a single string. It ends with the IP address in square
+brackets, followed by a colon and a port number if the logging of ports is
+enabled. The format of the rest of the string depends on whether the host
+issued a HELO or EHLO SMTP command, and whether the host name was verified by
+looking up its IP address. (Looking up the IP address can be forced by the
+%host_lookup% option, independent of verification.) A plain host name at the
+start of the string is a verified host name; if this is not present,
+verification either failed or was not requested. A host name in parentheses is
+the argument of a HELO or EHLO command. This is omitted if it is identical to
+the verified host name or to the host's IP address in square brackets.
+
+$sender_helo_name$::
+When a message is received from a remote host that has
+issued a HELO or EHLO command, the argument of that command is placed
+in this variable. It is also set if HELO or EHLO is used when a message
+is received using SMTP locally via the %-bs% or %-bS% options.
+
+$sender_host_address$::
+When a message is received from a remote host, this
+variable contains that host's IP address. For locally submitted messages, it is
+empty.
+
+$sender_host_authenticated$::
+This variable contains the name (not the public name) of the authenticator
+driver which successfully authenticated the client from which the message was
+received. It is empty if there was no successful authentication.
+
+$sender_host_name$::
+When a message is received from a remote host, this variable contains the
+host's name as obtained by looking up its IP address. For messages received by
+other means, this variable is empty.
++
+If the host name has not previously been looked up, a reference to
+$sender_host_name$ triggers a lookup (for messages from remote hosts).
+A looked up name is accepted only if it leads back to the original IP address
+via a forward lookup. If either the reverse or the forward lookup fails to find
+any data, or if the forward lookup does not yield the original IP address,
+$sender_host_name$ remains empty, and $host_lookup_failed$ is set to ``1''.
++
+However, if either of the lookups cannot be completed (for example, there is a
+DNS timeout), $host_lookup_deferred$ is set to ``1'', and
+$host_lookup_failed$ remains set to ``0''.
++
+Once $host_lookup_failed$ is set to ``1'', Exim does not try to look up the
+host name again if there is a subsequent reference to $sender_host_name$
+in the same Exim process, but it does try again if $sender_host_deferred$
+is set to ``1''.
++
+Exim does not automatically look up every calling host's name. If you want
+maximum efficiency, you should arrange your configuration so that it avoids
+these lookups altogether. The lookup happens only if one or more of the
+following are true:
+
+- A string containing $sender_host_name$ is expanded.
+
+- The calling host matches the list in %host_lookup%. In the default
+configuration, this option is set to \*, so it must be changed if lookups are
+to be avoided. (In the code, the default for %host_lookup% is unset.)
+
+- Exim needs the host name in order to test an item in a host list. The items
+that require this are described in sections <<SECThoslispatnam>> and
+<<SECThoslispatnamsk>>.
+
+- The calling host matches %helo_try_verify_hosts% or %helo_verify_hosts%.
+In this case, the host name is required to compare with the name quoted in any
+EHLO or HELO commands that the client issues.
+
+- The remote host issues a EHLO or HELO command that quotes one of the
+domains in %helo_lookup_domains%. The default value of this option is
++
+....
+helo_lookup_domains = @ : @[]
+....
++
+which causes a lookup if a remote host (incorrectly) gives the server's name or
+IP address in an EHLO or HELO command.
+
+
+$sender_host_port$::
+When a message is received from a remote host, this
+variable contains the port number that was used on the remote host.
+
+$sender_ident$::
+When a message is received from a remote host, this variable contains the
+identification received in response to an RFC 1413 request. When a message has
+been received locally, this variable contains the login name of the user that
+called Exim.
+
+$sender_rcvhost$::
+This is provided specifically for use in 'Received:' headers. It starts with
+either the verified host name (as obtained from a
+cindex:[DNS,reverse lookup]
+cindex:[reverse DNS lookup]
+reverse DNS lookup) or, if there is no verified host name, the IP address in
+square brackets. After that there may be text in parentheses. When the first
+item is a verified host name, the first thing in the parentheses is the IP
+address in square brackets, followed by a colon and a port number if port
+logging is enabled. When the first item is an IP address, the port is recorded
+as ``port='xxxx'##'' inside the parentheses.
++
+There may also be items of the form ``helo='xxxx'##'' if HELO or EHLO
+was used and its argument was not identical to the real host name or IP
+address, and ``ident='xxxx'##'' if an RFC 1413 ident string is available. If all
+three items are present in the parentheses, a newline and tab are inserted into
+the string, to improve the formatting of the 'Received:' header.
+
+$sender_verify_failure$::
+In an ACL, when a sender verification fails, this variable contains information
+about the failure. The details are the same as for $recipient_verify_failure$.
+
+$smtp_active_hostname$::
+During an SMTP session, this variable contains the value of the active host
+name, as specified by the %smtp_active_hostname% option. The value of
+$smtp_active_hostname$ is saved with any message that is received, so its value
+can be consulted during routing and delivery.
+
+
+$smtp_command_argument$::
+cindex:[AUTH,argument]
+cindex:[EXPN,argument]
+cindex:[ETRN,argument]
+cindex:[VRFY,argument]
+While an ACL is running to check an AUTH, EHLO, EXPN, ETRN, HELO, or VRFY
+command, this variable contains the argument for the SMTP command.
+
+$sn0$ -- $sn9$::
+These variables are copies of the values of the $n0$ -- $n9$ accumulators that
+were current at the end of the system filter file. This allows a system filter
+file to set values that can be tested in users' filter files. For example, a
+system filter could set a value indicating how likely it is that a message is
+junk mail.
+
+$spam_$'xxx'::
+A number of variables whose names start with $spam$ are available when Exim is
+compiled with the content-scanning extension. For details, see section
+<<SECTscanspamass>>.
+
+
+$spool_directory$::
+The name of Exim's spool directory.
+
+$spool_inodes$::
+The number of free inodes in the disk partition where Exim's spool files are
+being written. The value is recalculated whenever the variable is referenced.
+If the relevant file system does not have the concept of inodes, the value of
+is -1. See also the %check_spool_inodes% option.
+
+$spool_space$::
+The amount of free space (as a number of kilobytes) in the disk partition where
+Exim's spool files are being written. The value is recalculated whenever the
+variable is referenced. If the operating system does not have the ability to
+find the amount of free space (only true for experimental systems), the space
+value is -1. For example, to check in an ACL that there is at least 50
+megabytes free on the spool, you could write:
+
+ condition = ${if > {$spool_space}{50000}}
++
+See also the %check_spool_space% option.
+
+
+$thisaddress$::
+This variable is set only during the processing of the %foranyaddress% command
+in a filter file. Its use is explained in the description of that command.
+
+$tls_certificate_verified$::
+This variable is set to ``1'' if a TLS certificate was verified when the message
+was received, and ``0'' otherwise.
+
+$tls_cipher$::
+When a message is received from a remote host over an encrypted SMTP
+connection, this variable is set to the cipher suite that was negotiated, for
+example DES-CBC3-SHA. In other circumstances, in particular, for message
+received over unencrypted connections, the variable is empty. See chapter
+<<CHAPTLS>> for details of TLS support.
+
+$tls_peerdn$::
+ When a message is received from a remote host over an encrypted SMTP
+connection, and Exim is configured to request a certificate from the client,
+the value of the Distinguished Name of the certificate is made available in the
+$tls_peerdn$ during subsequent processing.
+
+$tod_bsdinbox$::
+The time of day and date, in the format required for BSD-style mailbox files,
+for example: Thu Oct 17 17:14:09 1995.
+
+$tod_epoch$::
+The time and date as a number of seconds since the start of the Unix epoch.
+
+$tod_full$::
+A full version of the time and date, for example: Wed, 16 Oct 1995 09:51:40
++0100. The timezone is always given as a numerical offset from UTC, with
+positive values used for timezones that are ahead (east) of UTC, and negative
+values for those that are behind (west).
+
+$tod_log$::
+The time and date in the format used for writing Exim's log files, for example:
+1995-10-12 15:32:29, but without a timezone.
+
+$tod_logfile$::
+This variable contains the date in the format yyyymmdd. This is the format that
+is used for datestamping log files when %log_file_path% contains the `%D`
+flag.
+
+$tod_zone$::
+This variable contains the numerical value of the local timezone, for example:
+-0500.
+
+$tod_zulu$::
+This variable contains the UTC date and time in ``Zulu'' format, as specified by
+ISO 8601, for example: 20030221154023Z.
+
+$value$::
+cindex:[$value$]
+This variable contains the result of an expansion lookup, extraction operation,
+or external command, as described above.
+
+$version_number$::
+The version number of Exim.
+
+$warn_message_delay$::
+This variable is set only during the creation of a message warning about a
+delivery delay. Details of its use are explained in section <<SECTcustwarn>>.
+
+$warn_message_recipients$::
+This variable is set only during the creation of a message warning about a
+delivery delay. Details of its use are explained in section <<SECTcustwarn>>.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPperl]]
+Embedded Perl
+-------------
+cindex:[Perl,calling from Exim]
+Exim can be built to include an embedded Perl interpreter. When this is done,
+Perl subroutines can be called as part of the string expansion process. To make
+use of the Perl support, you need version 5.004 or later of Perl installed on
+your system. To include the embedded interpreter in the Exim binary, include
+the line
+
+ EXIM_PERL = perl.o
+
+in your _Local/Makefile_ and then build Exim in the normal way.
+
+
+Setting up so Perl can be used
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[%perl_startup%]
+Access to Perl subroutines is via a global configuration option called
+%perl_startup% and an expansion string operator %\$\{perl ...\}%. If there is
+no %perl_startup% option in the Exim configuration file then no Perl
+interpreter is started and there is almost no overhead for Exim (since none of
+the Perl library will be paged in unless used). If there is a %perl_startup%
+option then the associated value is taken to be Perl code which is executed in
+a newly created Perl interpreter.
+
+The value of %perl_startup% is not expanded in the Exim sense, so you do not
+need backslashes before any characters to escape special meanings. The option
+should usually be something like
+
+ perl_startup = do '/etc/exim.pl'
+
+where _/etc/exim.pl_ is Perl code which defines any subroutines you want to
+use from Exim. Exim can be configured either to start up a Perl interpreter as
+soon as it is entered, or to wait until the first time it is needed. Starting
+the interpreter at the beginning ensures that it is done while Exim still has
+its setuid privilege, but can impose an unnecessary overhead if Perl is not in
+fact used in a particular run. Also, note that this does not mean that Exim is
+necessarily running as root when Perl is called at a later time. By default,
+the interpreter is started only when it is needed, but this can be changed in
+two ways:
+
+- cindex:[%perl_at_start%]
+Setting %perl_at_start% (a boolean option) in the configuration requests
+a startup when Exim is entered.
+
+- The command line option %-ps% also requests a startup when Exim is entered,
+overriding the setting of %perl_at_start%.
+
+There is also a command line option %-pd% (for delay) which suppresses the
+initial startup, even if %perl_at_start% is set.
+
+
+Calling Perl subroutines
+~~~~~~~~~~~~~~~~~~~~~~~~
+When the configuration file includes a %perl_startup% option you can make use
+of the string expansion item to call the Perl subroutines that are defined
+by the %perl_startup% code. The operator is used in any of the following
+forms:
+
+ ${perl{foo}}
+ ${perl{foo}{argument}}
+ ${perl{foo}{argument1}{argument2} ... }
+
+which calls the subroutine %foo% with the given arguments. A maximum of eight
+arguments may be passed. Passing more than this results in an expansion failure
+with an error message of the form
+
+ Too many arguments passed to Perl subroutine "foo" (max is 8)
+
+The return value of the Perl subroutine is evaluated in a scalar context before
+it is passed back to Exim to be inserted into the expanded string. If the
+return value is 'undef', the expansion is forced to fail in the same way as
+an explicit ``fail'' on an %\$\{if ...\}% or %\$\{lookup...\}% item. If the
+subroutine aborts by obeying Perl's %die% function, the expansion fails with
+the error message that was passed to %die%.
+
+
+Calling Exim functions from Perl
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Within any Perl code called from Exim, the function 'Exim::expand_string'
+is available to call back into Exim's string expansion function. For example,
+the Perl code
+
+ my $lp = Exim::expand_string('$local_part');
+
+makes the current Exim $local_part$ available in the Perl variable $lp$.
+Note those are single quotes and not double quotes to protect against
+$local_part$ being interpolated as a Perl variable.
+
+If the string expansion is forced to fail by a ``fail'' item, the result of
+'Exim::expand_string' is %undef%. If there is a syntax error in the
+expansion string, the Perl call from the original expansion string fails with
+an appropriate error message, in the same way as if %die% were used.
+
+cindex:[debugging,from embedded Perl]
+cindex:[log,writing from embedded Perl]
+Two other Exim functions are available for use from within Perl code.
+'Exim::debug_write(<'string'>)' writes the string to the standard error
+stream if Exim's debugging is enabled. If you want a newline at the end, you
+must supply it. 'Exim::log_write(<'string'>)' writes the string to Exim's
+main log, adding a leading timestamp. In this case, you should not supply a
+terminating newline.
+
+
+Use of standard output and error by Perl
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[Perl,standard output and error]
+You should not write to the standard error or output streams from within your
+Perl code, as it is not defined how these are set up. In versions of Exim
+before 4.50, it is possible for the standard output or error to refer to the
+SMTP connection during message reception via the daemon. Writing to this stream
+is certain to cause chaos. From Exim 4.50 onwards, the standard output and
+error streams are connected to _/dev/null_ in the daemon. The chaos is
+avoided, but the output is lost.
+
+cindex:[Perl,use of %warn%]
+The Perl %warn% statement writes to the standard error stream by default. Calls
+to %warn% may be embedded in Perl modules that you use, but over which you have
+no control. When Exim starts up the Perl interpreter, it arranges for output
+from the %warn% statement to be written to the Exim main log. You can change
+this by including appropriate Perl magic somewhere in your Perl code. For
+example, to discard %warn% output completely, you need this:
+
+ $SIG{__WARN__} = sub { };
+
+Whenever a %warn% is obeyed, the anonymous subroutine is called. In this
+example, the code for the subroutine is empty, so it does nothing, but you can
+include any Perl code that you like. The text of the %warn% message is passed
+as the first subroutine argument.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPinterfaces]]
+[titleabbrev="Starting the daemon"]
+Starting the daemon and the use of network interfaces
+-----------------------------------------------------
+cindex:[daemon,starting]
+cindex:[interface,listening]
+cindex:[network interface]
+cindex:[interface,network]
+cindex:[IP address,for listening]
+cindex:[daemon,listening IP addresses]
+cindex:[TCP/IP,setting listening interfaces]
+cindex:[TCP/IP,setting listening ports]
+A host that is connected to a TCP/IP network may have one or more physical
+hardware network interfaces. Each of these interfaces may be configured as one
+or more ``logical'' interfaces, which are the entities that a program actually
+works with. Each of these logical interfaces is associated with an IP address.
+In addition, TCP/IP software supports ``loopback'' interfaces (127.0.0.1 in IPv4
+and ::1 in IPv6), which do not use any physical hardware. Exim requires
+knowledge about the host's interfaces for use in three different circumstances:
+
+. When a listening daemon is started, Exim needs to know which interfaces
+and ports to listen on.
+
+. When Exim is routing an address, it needs to know which IP addresses
+are associated with local interfaces. This is required for the correct
+processing of MX lists by removing the local host and others with the
+same or higher priority values. Also, Exim needs to detect cases
+when an address is routed to an IP address that in fact belongs to the
+local host. Unless the %self% router option or the %allow_localhost%
+option of the smtp transport is set (as appropriate), this is treated
+as an error situation.
+
+. When Exim connects to a remote host, it may need to know which interface to use
+for the outgoing connection.
+
+
+Exim's default behaviour is likely to be appropriate in the vast majority
+of cases. If your host has only one interface, and you want all its IP
+addresses to be treated in the same way, and you are using only the
+standard SMTP port, you should not need to take any special action. The
+rest of this chapter does not apply to you.
+
+In a more complicated situation you may want to listen only on certain
+interfaces, or on different ports, and for this reason there are a number of
+options that can be used to influence Exim's behaviour. The rest of this
+chapter describes how they operate.
+
+When a message is received over TCP/IP, the interface and port that were
+actually used are set in $interface_address$ and $interface_port$.
+
+
+
+Starting a listening daemon
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+When a listening daemon is started (by means of the %-bd% command line
+option), the interfaces and ports on which it listens are controlled by the
+following options:
+
+- %daemon_smtp_ports% contains a list of default ports. (For backward
+compatibility, this option can also be specified in the singular.)
+
+- %local_interfaces% contains list of interface IP addresses on which to
+listen. Each item may optionally also specify a port.
+
+The default list separator in both cases is a colon, but this can be changed as
+described in section <<SECTlistconstruct>>. When IPv6 addresses are involved, it
+is usually best to change the separator to avoid having to double all the
+colons. For example:
+
+....
+local_interfaces = <; 127.0.0.1 ; \
+ 192.168.23.65 ; \
+ ::1 ; \
+ 3ffe:ffff:836f::fe86:a061
+....
+
+There are two different formats for specifying a port along with an IP address
+in %local_interfaces%:
+
+. The port is added onto the address with a dot separator. For example, to listen
+on port 1234 on two different IP addresses:
++
+....
+local_interfaces = <; 192.168.23.65.1234 ; \
+ 3ffe:ffff:836f::fe86:a061.1234
+....
+
+. The IP address is enclosed in square brackets, and the port is added
+with a colon separator, for example:
++
+....
+local_interfaces = <; [192.168.23.65]:1234 ; \
+ [3ffe:ffff:836f::fe86:a061]:1234
+....
+
+When a port is not specified, the value of %daemon_smtp_ports% is used. The
+default setting contains just one port:
+
+ daemon_smtp_ports = smtp
+
+If more than one port is listed, each interface that does not have its own port
+specified listens on all of them. Ports that are listed in
+%daemon_smtp_ports% can be identified either by name (defined in
+_/etc/services_) or by number. However, when ports are given with individual
+IP addresses in %local_interfaces%, only numbers (not names) can be used.
+
+
+
+Special IP listening addresses
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The addresses 0.0.0.0 and ::0 are treated specially. They are interpreted
+as ``all IPv4 interfaces'' and ``all IPv6 interfaces'', respectively. In each
+case, Exim tells the TCP/IP stack to ``listen on all IPv##'x' interfaces''
+instead of setting up separate listening sockets for each interface. The
+default value of %local_interfaces% is
+
+ local_interfaces = 0.0.0.0
+
+when Exim is built without IPv6 support; otherwise it is:
+
+ local_interfaces = <; ::0 ; 0.0.0.0
+
+Thus, by default, Exim listens on all available interfaces, on the SMTP port.
+
+
+
+Overriding local_interfaces and daemon_smtp_ports
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The %-oX% command line option can be used to override the values of
+%daemon_smtp_ports% and/or %local_interfaces% for a particular daemon
+instance. Another way of doing this would be to use macros and the %-D%
+option. However, %-oX% can be used by any admin user, whereas modification of
+the runtime configuration by %-D% is allowed only when the caller is root or
+exim.
+
+The value of %-oX% is a list of items. The default colon separator can be
+changed in the usual way if required. If there are any items that do not
+contain dots or colons (that is, are not IP addresses), the value of
+%daemon_smtp_ports% is replaced by the list of those items. If there are any
+items that do contain dots or colons, the value of %local_interfaces% is
+replaced by those items. Thus, for example,
+
+ -oX 1225
+
+overrides %daemon_smtp_ports%, but leaves %local_interfaces% unchanged,
+whereas
+
+ -oX 192.168.34.5.1125
+
+overrides %local_interfaces%, leaving %daemon_smtp_ports% unchanged.
+(However, since %local_interfaces% now contains no items without ports, the
+value of %daemon_smtp_ports% is no longer relevant in this example.)
+
+
+
+[[SECTsupobssmt]]
+Support for the obsolete SSMTP (or SMTPS) protocol
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[ssmtp protocol]
+cindex:[smtps protocol]
+cindex:[SMTP,ssmtp protocol]
+cindex:[SMTP,smtps protocol]
+Exim supports the obsolete SSMTP protocol (also known as SMTPS) that was used
+before the STARTTLS command was standardized for SMTP. Some legacy clients
+still use this protocol. If the %tls_on_connect_ports% option is set to a
+list of port numbers, connections to those ports must use SSMTP. The most
+common use of this option is expected to be
+
+ tls_on_connect_ports = 465
+
+because 465 is the usual port number used by the legacy clients. There is also
+a command line option %-tls-on-connect%, which forces all ports to behave in
+this way when a daemon is started.
+
+*Warning*: Setting %tls_on_connect_ports% does not of itself cause the
+daemon to listen on those ports. You must still specify them in
+%daemon_smtp_ports%, %local_interfaces%, or the %-oX% option. (This is
+because %tls_on_connect_ports% applies to %inetd% connections as well as to
+connections via the daemon.)
+
+
+
+
+IPv6 address scopes
+~~~~~~~~~~~~~~~~~~~
+IPv6 addresses have ``scopes'', and a host with multiple hardware interfaces
+can, in principle, have the same link-local IPv6 address on different
+interfaces. Thus, additional information is needed, over and above the IP
+address, to distinguish individual interfaces. A convention of using a
+percent sign followed by something (often the interface name) has been
+adopted in some cases, leading to addresses like this:
+
+ fe80::202:b3ff:fe03:45c1%eth0
+
+To accommodate this usage, a percent sign followed by an arbitrary string is
+allowed at the end of an IPv6 address. By default, Exim calls 'getaddrinfo()'
+to convert a textual IPv6 address for actual use. This function recognizes the
+percent convention in operating systems that support it, and it processes the
+address appropriately. Unfortunately, some older libraries have problems with
+'getaddrinfo()'. If
+
+ IPV6_USE_INET_PTON=yes
+
+is set in _Local/Makefile_ (or an OS-dependent Makefile) when Exim is built,
+Exim uses 'inet_pton()' to convert a textual IPv6 address for actual use,
+instead of 'getaddrinfo()'. (Before version 4.14, it always used this
+function.) Of course, this means that the additional functionality of
+'getaddrinfo()' -- recognizing scoped addresses -- is lost.
+
+
+
+Examples of starting a listening daemon
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The default case in an IPv6 environment is
+
+ daemon_smtp_ports = smtp
+ local_interfaces = <; ::0 ; 0.0.0.0
+
+This specifies listening on the smtp port on all IPv6 and IPv4 interfaces.
+Either one or two sockets may be used, depending on the characteristics of
+the TCP/IP stack. (This is complicated and messy; for more information,
+read the comments in the _daemon.c_ source file.)
+
+To specify listening on ports 25 and 26 on all interfaces:
+
+ daemon_smtp_ports = 25 : 26
+
+(leaving %local_interfaces% at the default setting) or, more explicitly:
+
+....
+local_interfaces = <; ::0.25 ; ::0.26 \
+ 0.0.0.0.25 ; 0.0.0.0.26
+....
+
+To listen on the default port on all IPv4 interfaces, and on port 26 on the
+IPv4 loopback address only:
+
+ local_interfaces = 0.0.0.0 : 127.0.0.1.26
+
+To specify listening on the default port on specific interfaces only:
+
+ local_interfaces = 192.168.34.67 : 192.168.34.67
+
+*Warning*: such a setting excludes listening on the loopback interfaces.
+
+
+
+[[SECTreclocipadd]]
+Recognising the local host
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+The %local_interfaces% option is also used when Exim needs to determine
+whether or not an IP address refers to the local host. That is, the IP
+addresses of all the interfaces on which a daemon is listening are always
+treated as local.
+
+For this usage, port numbers in %local_interfaces% are ignored. If either of
+the items 0.0.0.0 or ::0 are encountered, Exim gets a complete list of
+available interfaces from the operating system, and extracts the relevant
+(that is, IPv4 or IPv6) addresses to use for checking.
+
+Some systems set up large numbers of virtual interfaces in order to provide
+many virtual web servers. In this situation, you may want to listen for
+email on only a few of the available interfaces, but nevertheless treat all
+interfaces as local when routing. You can do this by setting
+%extra_local_interfaces% to a list of IP addresses, possibly including the
+``all'' wildcard values. These addresses are recognized as local, but are not
+used for listening. Consider this example:
+
+....
+local_interfaces = <; 127.0.0.1 ; ::1 ; \
+ 192.168.53.235 ; \
+ 3ffe:2101:12:1:a00:20ff:fe86:a061
+
+extra_local_interfaces = <; ::0 ; 0.0.0.0
+....
+
+The daemon listens on the loopback interfaces and just one IPv4 and one IPv6
+address, but all available interface addresses are treated as local when
+Exim is routing.
+
+In some environments the local host name may be in an MX list, but with an IP
+address that is not assigned to any local interface. In other cases it may be
+desirable to treat other host names as if they referred to the local host. Both
+these cases can be handled by setting the %hosts_treat_as_local% option.
+This contains host names rather than IP addresses. When a host is referenced
+during routing, either via an MX record or directly, it is treated as the local
+host if its name matches %hosts_treat_as_local%, or if any of its IP
+addresses match %local_interfaces% or %extra_local_interfaces%.
+
+
+
+Delivering to a remote host
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Delivery to a remote host is handled by the smtp transport. By default, it
+allows the system's TCP/IP functions to choose which interface to use (if
+there is more than one) when connecting to a remote host. However, the
+%interface% option can be set to specify which interface is used. See the
+description of the smtp transport in chapter <<CHAPsmtptrans>> for more details.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPmainconfig]]
+Main configuration
+------------------
+cindex:[configuration file,main section]
+cindex:[main configuration]
+The first part of the run time configuration file contains three types of item:
+
+- Macro definitions: These lines start with an upper case letter. See section
+<<SECTmacrodefs>> for details of macro processing.
+
+- Named list definitions: These lines start with one of the words ``domainlist'',
+``hostlist'', ``addresslist'', or ``localpartlist''. Their use is described in
+section <<SECTnamedlists>>.
+
+- Main configuration settings: Each setting occupies one line of the file
+(with possible continuations). If any setting is preceded by the word
+``hide'', the %-bP% command line option displays its value to admin users only.
+See section <<SECTcos>> for a description of the syntax of these option settings.
+
+This chapter specifies all the main configuration options, along with their
+types and default values. For ease of finding a particular option, they appear
+in alphabetical order in section <<SECTalomo>> below. However, because there are
+now so many options, they are first listed briefly in functional groups, as an
+aid to finding the name of the option you are looking for. Some options are
+listed in more than one group.
+
+Miscellaneous
+~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%bi_command% to run for %-bi% command line option
+%keep_malformed% for broken files -- should not happen
+%localhost_number% for unique message ids in clusters
+%message_body_visible% how much to show in $message_body$
+%mua_wrapper% run in ``MUA wrapper'' mode
+%print_topbitchars% top-bit characters are printing
+%timezone% force time zone
+--------------------------------------------------------------------------
+
+
+Exim parameters
+~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%exim_group% override compiled-in value
+%exim_path% override compiled-in value
+%exim_user% override compiled-in value
+%primary_hostname% default from 'uname()'
+%split_spool_directory% use multiple directories
+%spool_directory% override compiled-in value
+--------------------------------------------------------------------------
+
+
+
+Privilege controls
+~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%admin_groups% groups that are Exim admin users
+%deliver_drop_privilege% drop root for delivery processes
+%local_from_check% insert 'Sender:' if necessary
+%local_from_prefix% for testing 'From:' for local sender
+%local_from_suffix% for testing 'From:' for local sender
+%local_sender_retain% keep 'Sender:' from untrusted user
+%never_users% do not run deliveries as these
+%prod_requires_admin% forced delivery requires admin user
+%queue_list_requires_admin% queue listing requires admin user
+%trusted_groups% groups that are trusted
+%trusted_users% users that are trusted
+--------------------------------------------------------------------------
+
+
+
+Logging
+~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%hosts_connection_nolog% exemption from connect logging
+%log_file_path% override compiled-in value
+%log_selector% set/unset optional logging
+%log_timezone% add timezone to log lines
+%message_logs% create per-message logs
+%preserve_message_logs% after message completion
+%process_log_path% for SIGUSR1 and 'exiwhat'
+%syslog_duplication% controls duplicate log lines on syslog
+%syslog_facility% set syslog ``facility'' field
+%syslog_processname% set syslog ``ident'' field
+%syslog_timestamp% timestamp syslog lines
+%write_rejectlog% control use of message log
+--------------------------------------------------------------------------
+
+
+
+Frozen messages
+~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%auto_thaw% sets time for retrying frozen messages
+%freeze_tell% send message when freezing
+%move_frozen_messages% to another directory
+%timeout_frozen_after% keep frozen messages only so long
+--------------------------------------------------------------------------
+
+
+
+Data lookups
+~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%ldap_default_servers% used if no server in query
+%ldap_version% set protocol version
+%lookup_open_max% lookup files held open
+%mysql_servers% as it says
+%oracle_servers% as it says
+%pgsql_servers% as it says
+--------------------------------------------------------------------------
+
+
+
+Message ids
+~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%message_id_header_domain% used to build 'Message-ID:' header
+%message_id_header_text% ditto
+--------------------------------------------------------------------------
+
+
+
+Embedded Perl Startup
+~~~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%perl_at_start% always start the interpreter
+%perl_startup% code to obey when starting Perl
+--------------------------------------------------------------------------
+
+
+
+Daemon
+~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%daemon_smtp_ports% default ports
+%extra_local_interfaces% not necessarily listened on
+%local_interfaces% on which to listen, with optional ports
+%pid_file_path% override compiled-in value
+%queue_run_max% maximum simultaneous queue runners
+--------------------------------------------------------------------------
+
+
+
+Resource control
+~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%check_log_inodes% before accepting a message
+%check_log_space% before accepting a message
+%check_spool_inodes% before accepting a message
+%check_spool_space% before accepting a message
+%deliver_queue_load_max% no queue deliveries if load high
+%queue_only_load% queue incoming if load high
+%queue_run_max% maximum simultaneous queue runners
+%remote_max_parallel% parallel SMTP delivery per message
+%smtp_accept_max% simultaneous incoming connections
+%smtp_accept_max_nommail% non-mail commands
+%smtp_accept_max_nonmail_hosts% hosts to which the limit applies
+%smtp_accept_max_per_connection% messages per connection
+%smtp_accept_max_per_host% connections from one host
+%smtp_accept_queue% queue mail if more connections
+%smtp_accept_queue_per_connection% queue if more messages per connection
+%smtp_accept_reserve% only reserve hosts if more connections
+%smtp_check_spool_space% from SIZE on MAIL command
+%smtp_connect_backlog% passed to TCP/IP stack
+%smtp_load_reserve% SMTP from reserved hosts if load high
+%smtp_reserve_hosts% these are the reserve hosts
+--------------------------------------------------------------------------
+
+
+
+Policy controls
+~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%acl_not_smtp% set ACL for non-SMTP messages
+%acl_smtp_auth% set ACL for AUTH
+%acl_smtp_connect% set ACL for connection
+%acl_smtp_data% set ACL for DATA
+%acl_smtp_etrn% set ACL for ETRN
+%acl_smtp_expn% set ACL for EXPN
+%acl_smtp_helo% set ACL for EHLO or HELO
+%acl_smtp_mail% set ACL for MAIL
+%acl_smtp_mailauth% set ACL for AUTH on MAIL command
+%acl_smtp_mime% set ACL for MIME parts
+%acl_smtp_predata% set ACL for start of data
+%acl_smtp_quit% set ACL for QUIT
+%acl_smtp_rcpt% set ACL for RCPT
+%acl_smtp_starttls% set ACL for STARTTLS
+%acl_smtp_vrfy% set ACL for VRFY
+%av_scanner% specify virus scanner
+%header_maxsize% total size of message header
+%header_line_maxsize% individual header line limit
+%helo_accept_junk_hosts% allow syntactic junk from these hosts
+%helo_allow_chars% allow illegal chars in HELO names
+%helo_lookup_domains% lookup hostname for these HELO names
+%helo_try_verify_hosts% HELO soft-checked for these hosts
+%helo_verify_hosts% HELO hard-checked for these hosts
+%host_lookup% host name looked up for these hosts
+%host_lookup_order% order of DNS and local name lookups
+%host_reject_connection% reject connection from these hosts
+%hosts_treat_as_local% useful in some cluster configurations
+%local_scan_timeout% timeout for 'local_scan()'
+%message_size_limit% for all messages
+%percent_hack_domains% recognize %-hack for these domains
+%spamd_address% set interface to SpamAssassin
+--------------------------------------------------------------------------
+
+
+
+Callout cache
+~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%callout_domain_negative_expire% timeout for negative domain cache item
+%callout_domain_positive_expire% timeout for positive domain cache item
+%callout_negative_expire% timeout for negative address cache item
+%callout_positive_expire% timeout for positive address cache item
+%callout_random_local_part% string to use for ``random'' testing
+--------------------------------------------------------------------------
+
+
+
+TLS
+~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%tls_advertise_hosts% advertise TLS to these hosts
+%tls_certificate% location of server certificate
+%tls_crl% certificate revocation list
+%tls_dhparam% DH parameters for server
+%tls_on_connect_ports% specify SSMTP (SMTPS) ports
+%tls_privatekey% location of server private key
+%tls_remember_esmtp% don't reset after starting TLS
+%tls_require_ciphers% specify acceptable cipers
+%tls_try_verify_hosts% try to verify client certificate
+%tls_verify_certificates% expected client certificates
+%tls_verify_hosts% insist on client certificate verify
+--------------------------------------------------------------------------
+
+
+
+Local user handling
+~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%finduser_retries% useful in NIS environments
+%gecos_name% used when creating 'Sender:'
+%gecos_pattern% ditto
+%max_username_length% for systems that truncate
+%unknown_login% used when no login name found
+%unknown_username% ditto
+%uucp_from_pattern% for recognizing ``From '' lines
+%uucp_from_sender% ditto
+--------------------------------------------------------------------------
+
+
+
+All incoming messages (SMTP and non-SMTP)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%header_maxsize% total size of message header
+%header_line_maxsize% individual header line limit
+%message_size_limit% applies to all messages
+%percent_hack_domains% recognize %-hack for these domains
+%received_header_text% expanded to make 'Received:'
+%received_headers_max% for mail loop detection
+%recipients_max% limit per message
+%recipients_max_reject% permanently reject excess
+--------------------------------------------------------------------------
+
+
+
+
+Non-SMTP incoming messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%receive_timeout% for non-SMTP messages
+--------------------------------------------------------------------------
+
+
+
+
+
+Incoming SMTP messages
+~~~~~~~~~~~~~~~~~~~~~~
+See also the 'Policy controls' section above.
+
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%host_lookup% host name looked up for these hosts
+%host_lookup_order% order of DNS and local name lookups
+%recipient_unqualified_hosts% may send unqualified recipients
+%rfc1413_hosts% make ident calls to these hosts
+%rfc1413_query_timeout% zero disables ident calls
+%sender_unqualified_hosts% may send unqualified senders
+%smtp_accept_keepalive% some TCP/IP magic
+%smtp_accept_max% simultaneous incoming connections
+%smtp_accept_max_nommail% non-mail commands
+%smtp_accept_max_nonmail_hosts% hosts to which the limit applies
+%smtp_accept_max_per_connection% messages per connection
+%smtp_accept_max_per_host% connections from one host
+%smtp_accept_queue% queue mail if more connections
+%smtp_accept_queue_per_connection% queue if more messages per connection
+%smtp_accept_reserve% only reserve hosts if more connections
+%smtp_active_hostname% host name to use in messages
+%smtp_banner% text for welcome banner
+%smtp_check_spool_space% from SIZE on MAIL command
+%smtp_connect_backlog% passed to TCP/IP stack
+%smtp_enforce_sync% of SMTP command/responses
+%smtp_etrn_command% what to run for ETRN
+%smtp_etrn_serialize% only one at once
+%smtp_load_reserve% only reserve hosts if this load
+%smtp_max_unknown_commands% before dropping connection
+%smtp_ratelimit_hosts% apply ratelimiting to these hosts
+%smtp_ratelimit_mail% ratelimit for MAIL commands
+%smtp_ratelimit_rcpt% ratelimit for RCPT commands
+%smtp_receive_timeout% per command or data line
+%smtp_reserve_hosts% these are the reserve hosts
+%smtp_return_error_details% give detail on rejections
+--------------------------------------------------------------------------
+
+
+
+SMTP extensions
+~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%accept_8bitmime% advertise 8BITMIME
+%auth_advertise_hosts% advertise AUTH to these hosts
+%ignore_fromline_hosts% allow ``From '' from these hosts
+%ignore_fromline_local% allow ``From '' from local SMTP
+%pipelining_advertise_hosts% advertise pipelining to these hosts
+%tls_advertise_hosts% advertise TLS to these hosts
+--------------------------------------------------------------------------
+
+
+
+Processing messages
+~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%allow_domain_literals% recognize domain literal syntax
+%allow_mx_to_ip% allow MX to point to IP address
+%allow_utf8_domains% in addresses
+%delivery_date_remove% from incoming messages
+%envelope_to_remote% from incoming messages
+%extract_addresses_remove_arguments%affects %-t% processing
+%headers_charset% default for translations
+%qualify_domain% default for senders
+%qualify_recipient% default for recipients
+%return_path_remove% from incoming messages
+%strip_excess_angle_brackets% in addresses
+%strip_trailing_dot% at end of addresses
+%untrusted_set_sender% untrusted can set envelope sender
+--------------------------------------------------------------------------
+
+
+
+System filter
+~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%system_filter% locate system filter
+%system_filter_directory_transport% transport for delivery to a directory
+%system_filter_file_transport% transport for delivery to a file
+%system_filter_group% group for filter running
+%system_filter_pipe_transport% transport for delivery to a pipe
+%system_filter_reply_transport% transport for autoreply delivery
+%system_filter_user% user for filter running
+--------------------------------------------------------------------------
+
+
+
+Routing and delivery
+~~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%dns_again_means_nonexist% for broken domains
+%dns_check_names_pattern% pre-DNS syntax check
+%dns_ipv4_lookup% only v4 lookup for these domains
+%dns_retrans% parameter for resolver
+%dns_retry% parameter for resolver
+%hold_domains% hold delivery for these domains
+%local_interfaces% for routing checks
+%queue_domains% no immediate delivery for these
+%queue_only% no immediate delivery at all
+%queue_only_file% no immediate deliveryif file exists
+%queue_only_load% no immediate delivery if load is high
+%queue_only_override% allow command line to override
+%queue_run_in_order% order of arrival
+%queue_run_max% of simultaneous queue runners
+%queue_smtp_domains% no immediate SMTP delivery for these
+%remote_max_parallel% parallel SMTP delivery per message
+%remote_sort_domains% order of remote deliveries
+%retry_data_expire% timeout for retry data
+%retry_interval_max% safety net for retry rules
+--------------------------------------------------------------------------
+
+
+
+Bounce and warning messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[frame="none"]
+`-----------------------------------`-------------------------------------
+%bounce_message_file% content of bounce
+%bounce_message_text% content of bounce
+%bounce_return_body% include body if returning message
+%bounce_return_message% include original message in bounce
+%bounce_return_size_limit% limit on returned message
+%bounce_sender_authentication% send authenticated sender with bounce
+%errors_copy% copy bounce messages
+%errors_reply_to% 'Reply-to:' in bounces
+%delay_warning% time schedule
+%delay_warning_condition% condition for warning messages
+%ignore_bounce_errors_after% discard undeliverable bounces
+%warn_message_file% content of warning message
+--------------------------------------------------------------------------
+
+
+
+[[SECTalomo]]
+Alphabetical list of main options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Those options that undergo string expansion before use are marked with !!.
+
+oindex:[%accept_8bitmime%]
+`..'=
+%accept_8bitmime%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[8BITMIME]
+cindex:[8-bit characters]
+This option causes Exim to send 8BITMIME in its response to an SMTP
+EHLO command, and to accept the BODY= parameter on MAIL commands.
+However, though Exim is 8-bit clean, it is not a protocol converter, and it
+takes no steps to do anything special with messages received by this route.
+Consequently, this option is turned off by default.
+
+oindex:[%acl_not_smtp%]
+`..'=
+%acl_not_smtp%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[{ACL},for non-SMTP messages]
+cindex:[non-SMTP messages, ACL for]
+This option defines the ACL that is run when a non-SMTP message is on the point
+of being accepted. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_auth%]
+`..'=
+%acl_smtp_auth%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[{ACL},setting up for SMTP commands]
+cindex:[AUTH,ACL for]
+This option defines the ACL that is run when an SMTP AUTH command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_connect%]
+`..'=
+%acl_smtp_connect%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[{ACL},on SMTP connection]
+This option defines the ACL that is run when an SMTP connection is received.
+See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_data%]
+`..'=
+%acl_smtp_data%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[DATA, ACL for]
+This option defines the ACL that is run after an SMTP DATA command has been
+processed and the message itself has been received, but before the final
+acknowledgement is sent. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_etrn%]
+`..'=
+%acl_smtp_etrn%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[ETRN,ACL for]
+This option defines the ACL that is run when an SMTP ETRN command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_expn%]
+`..'=
+%acl_smtp_expn%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[EXPN,ACL for]
+This option defines the ACL that is run when an SMTP EXPN command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_helo%]
+`..'=
+%acl_smtp_helo%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[EHLO,ACL for]
+cindex:[HELO,ACL for]
+This option defines the ACL that is run when an SMTP EHLO or HELO
+command is received. See chapter <<CHAPACL>> for further details.
+
+
+oindex:[%acl_smtp_mail%]
+`..'=
+%acl_smtp_mail%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[MAIL,ACL for]
+This option defines the ACL that is run when an SMTP MAIL command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_mailauth%]
+`..'=
+%acl_smtp_mailauth%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[AUTH,on MAIL command]
+This option defines the ACL that is run when there is an AUTH parameter on
+a MAIL command. See chapter <<CHAPACL>> for details of ACLs, and chapter
+<<CHAPSMTPAUTH>> for details of authentication.
+
+oindex:[%acl_smtp_mime%]
+`..'=
+%acl_smtp_mime%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[MIME content scanning,ACL for]
+This option is available when Exim is built with the content-scanning
+extension. It defines the ACL that is run for each MIME part in a message. See
+section <<SECTscanmimepart>> for details.
+
+oindex:[%acl_smtp_predata%]
+`..'=
+%acl_smtp_predata%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+This option defines the ACL that is run when an SMTP DATA command is
+received, before the message itself is received. See chapter <<CHAPACL>> for
+further details.
+
+oindex:[%acl_smtp_quit%]
+`..'=
+%acl_smtp_quit%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[QUIT,ACL for]
+This option defines the ACL that is run when an SMTP QUIT command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_rcpt%]
+`..'=
+%acl_smtp_rcpt%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[RCPT,ACL for]
+This option defines the ACL that is run when an SMTP RCPT command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_starttls%]
+`..'=
+%acl_smtp_starttls%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[STARTTLS, ACL for]
+This option defines the ACL that is run when an SMTP STARTTLS command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%acl_smtp_vrfy%]
+`..'=
+%acl_smtp_vrfy%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[VRFY,ACL for]
+This option defines the ACL that is run when an SMTP VRFY command is
+received. See chapter <<CHAPACL>> for further details.
+
+oindex:[%admin_groups%]
+`..'=
+%admin_groups%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[admin user]
+If the current group or any of the supplementary groups of the caller is in
+this colon-separated list, the caller has admin privileges. If all your system
+programmers are in a specific group, for example, you can give them all Exim
+admin privileges by putting that group in %admin_groups%. However, this does
+not permit them to read Exim's spool files (whose group owner is the Exim gid).
+To permit this, you have to add individuals to the Exim group.
+
+
+oindex:[%allow_domain_literals%]
+`..'=
+%allow_domain_literals%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[domain literal]
+If this option is set, the RFC 2822 domain literal format is permitted in
+email addresses. The option is not set by default, because the domain literal
+format is not normally required these days, and few people know about it. It
+has, however, been exploited by mail abusers.
+
+Unfortunately, it seems that some DNS black list maintainers are using this
+format to report black listing to postmasters. If you want to accept messages
+addressed to your hosts by IP address, you need to set
+%allow_domain_literals% true, and also to add `@[]` to the list of local
+domains (defined in the named domain list %local_domains% in the default
+configuration). This ``magic string'' matches the domain literal form of all the
+local host's IP addresses.
+
+
+oindex:[%allow_mx_to_ip%]
+`..'=
+%allow_mx_to_ip%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[MX record,pointing to IP address]
+It appears that more and more DNS zone administrators are breaking the rules
+and putting domain names that look like IP addresses on the right hand side of
+MX records. Exim follows the rules and rejects this, giving an error message
+that explains the mis-configuration. However, some other MTAs support this
+practice, so to avoid ``Why can''t Exim do this?' complaints, %allow_mx_to_ip%
+exists, in order to enable this heinous activity. It is not recommended, except
+when you have no other choice.
+
+oindex:[%allow_utf8_domains%]
+`..'=
+%allow_utf8_domains%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[domain,UTF-8 characters in]
+cindex:[UTF-8,in domain name]
+Lots of discussion is going on about internationalized domain names. One
+camp is strongly in favour of just using UTF-8 characters, and it seems
+that at least two other MTAs permit this. This option allows Exim users to
+experiment if they wish.
+
+If it is set true, Exim's domain parsing function allows valid
+UTF-8 multicharacters to appear in domain name components, in addition to
+letters, digits, and hyphens. However, just setting this option is not
+enough; if you want to look up these domain names in the DNS, you must also
+adjust the value of %dns_check_names_pattern% to match the extended form. A
+suitable setting is:
+
+....
+dns_check_names_pattern = (?i)^(?>(?(1)\.|())[a-z0-9\xc0-\xff]\
+ (?>[-a-z0-9\x80-\xff]*[a-z0-9\x80-\xbf])?)+$
+....
+
+Alternatively, you can just disable this feature by setting
+
+ dns_check_names_pattern =
+
+That is, set the option to an empty string so that no check is done.
+
+
+oindex:[%auth_advertise_hosts%]
+`..'=
+%auth_advertise_hosts%, Use: 'main', Type: 'host list'!!, Default: '\*'
+===
+
+cindex:[authentication,advertising]
+cindex:[AUTH,advertising]
+If any server authentication mechanisms are configured, Exim advertises them in
+response to an EHLO command only if the calling host matches this list.
+Otherwise, Exim does not advertise AUTH.
+Exim does not accept AUTH commands from clients to which it has not
+advertised the availability of AUTH. The advertising of individual
+authentication mechanisms can be controlled by the use of the
+%server_advertise_condition% generic authenticator option on the individual
+authenticators. See chapter <<CHAPSMTPAUTH>> for further details.
+
+Certain mail clients (for example, Netscape) require the user to provide a name
+and password for authentication if AUTH is advertised, even though it may
+not be needed (the host may accept messages from hosts on its local LAN without
+authentication, for example). The %auth_advertise_hosts% option can be used
+to make these clients more friendly by excluding them from the set of hosts to
+which Exim advertises AUTH.
+
+cindex:[AUTH,advertising when encrypted]
+If you want to advertise the availability of AUTH only when the connection
+is encrypted using TLS, you can make use of the fact that the value of this
+option is expanded, with a setting like this:
+
+ auth_advertise_hosts = ${if eq{$tls_cipher}{}{}{*}}
+
+If $tls_cipher$ is empty, the session is not encrypted, and the result of
+the expansion is empty, thus matching no hosts. Otherwise, the result of the
+expansion is \*, which matches all hosts.
+
+
+oindex:[%auto_thaw%]
+`..'=
+%auto_thaw%, Use: 'main', Type: 'time', Default: '0s'
+===
+
+cindex:[thawing messages]
+cindex:[unfreezing messages]
+If this option is set to a time greater than zero, a queue runner will try a
+new delivery attempt on any frozen message if this much time has passed since
+it was frozen. This may result in the message being re-frozen if nothing has
+changed since the last attempt. It is a way of saying ``keep on trying, even
+though there are big problems''. See also %timeout_frozen_after% and
+%ignore_bounce_errors_after%.
+
+
+oindex:[%av_scanner%]
+`..'=
+%av_scanner%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+This option is available if Exim is built with the content-scanning extension.
+It specifies which anti-virus scanner to use. The default value is:
+
+ sophie:/var/run/sophie
+
+If the value of %av_scanner% starts with dollar character, it is expanded
+before use. See section <<SECTscanvirus>> for further details.
+
+
+
+oindex:[%bi_command%]
+`..'=
+%bi_command%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[%-bi% option]
+This option supplies the name of a command that is run when Exim is called with
+the %-bi% option (see chapter <<CHAPcommandline>>). The string value is just the
+command name, it is not a complete command line. If an argument is required, it
+must come from the %-oA% command line option.
+
+
+oindex:[%bounce_message_file%]
+`..'=
+%bounce_message_file%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[bounce message,customizing]
+cindex:[customizing,bounce message]
+This option defines a template file containing paragraphs of text to be used
+for constructing bounce messages. Details of the file's contents are given in
+chapter <<CHAPemsgcust>>. See also %warn_message_file%.
+
+
+oindex:[%bounce_message_text%]
+`..'=
+%bounce_message_text%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+When this option is set, its contents are included in the default bounce
+message immediately after ``This message was created automatically by mail
+delivery software.'' It is not used if %bounce_message_file% is set.
+
+oindex:[%bounce_return_body%]
+`..'=
+%bounce_return_body%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[bounce message,including body]
+This option controls whether the body of an incoming message is included in a
+bounce message when %bounce_return_message% is true. If it is not set, only
+the message header is included.
+cindex:[bounce message,including original]
+
+oindex:[%bounce_return_message%]
+`..'=
+%bounce_return_message%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+If this option is set false, the original message is not included in bounce
+messages generated by Exim. See also %bounce_return_size_limit%.
+
+
+oindex:[%bounce_return_size_limit%]
+`..'=
+%bounce_return_size_limit%, Use: 'main', Type: 'integer', Default: '100K'
+===
+
+cindex:[size limit, of bounce]
+cindex:[bounce message,size limit]
+cindex:[limit,bounce message size]
+This option sets a limit in bytes on the size of messages that are returned to
+senders as part of bounce messages when %bounce_return_message% is true. The
+limit should be less than the value of the global %message_size_limit% and of
+any %message_size_limit% settings on transports, to allow for the bounce text
+that Exim generates. If this option is set to zero there is no limit.
+
+When the body of any message that is to be included in a bounce message is
+greater than the limit, it is truncated, and a comment pointing this out is
+added at the top. The actual cutoff may be greater than the value given, owing
+to the use of buffering for transferring the message in chunks (typically 8K in
+size). The idea is to save bandwidth on those undeliverable 15-megabyte
+messages.
+
+oindex:[%bounce_sender_authentication%]
+`..'=
+%bounce_sender_authentication%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[bounce message,sender authentication]
+cindex:[authentication,bounce message]
+cindex:[AUTH,on bounce message]
+This option provides an authenticated sender address that is sent with any
+bounce messages generated by Exim that are sent over an authenticated SMTP
+connection. A typical setting might be:
+
+ bounce_sender_authentication = mailer-daemon@my.domain.example
+
+which would cause bounce messages to be sent using the SMTP command:
+
+ MAIL FROM:<> AUTH=mailer-daemon@my.domain.example
+
+The value of %bounce_sender_authentication% must always be a complete email
+address.
+
+oindex:[%callout_domain_negative_expire%]
+`..'=
+%callout_domain_negative_expire%, Use: 'main', Type: 'time', Default: '3h'
+===
+
+cindex:[caching,callout timeouts]
+cindex:[callout,caching timeouts]
+This option specifies the expiry time for negative callout cache data for a
+domain. See section <<SECTcallver>> for details of callout verification, and
+section <<SECTcallvercache>> for details of the caching.
+
+
+oindex:[%callout_domain_positive_expire%]
+`..'=
+%callout_domain_positive_expire%, Use: 'main', Type: 'time', Default: '7d'
+===
+
+This option specifies the expiry time for positive callout cache data for a
+domain. See section <<SECTcallver>> for details of callout verification, and
+section <<SECTcallvercache>> for details of the caching.
+
+
+oindex:[%callout_negative_expire%]
+`..'=
+%callout_negative_expire%, Use: 'main', Type: 'time', Default: '2h'
+===
+
+This option specifies the expiry time for negative callout cache data for an
+address. See section <<SECTcallver>> for details of callout verification, and
+section <<SECTcallvercache>> for details of the caching.
+
+
+oindex:[%callout_positive_expire%]
+`..'=
+%callout_positive_expire%, Use: 'main', Type: 'time', Default: '24h'
+===
+
+This option specifies the expiry time for positive callout cache data for an
+address. See section <<SECTcallver>> for details of callout verification, and
+section <<SECTcallvercache>> for details of the caching.
+
+
+oindex:[%callout_random_local_part%]
+`..'=
+%callout_random_local_part%, Use: 'main', Type: 'string'!!, Default: 'see below'
+===
+
+This option defines the ``random'' local part that can be used as part of callout
+verification. The default value is
+
+ $primary_host_name-$tod_epoch-testing
+
+See section <<CALLaddparcall>> for details of how this value is used.
+
+
+oindex:[%check_log_inodes%]
+`..'=
+%check_log_inodes%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+See %check_spool_space% below.
+
+
+oindex:[%check_log_space%]
+`..'=
+%check_log_space%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+See %check_spool_space% below.
+
+
+oindex:[%check_spool_inodes%]
+`..'=
+%check_spool_inodes%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+See %check_spool_space% below.
+
+
+oindex:[%check_spool_space%]
+`..'=
+%check_spool_space%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[checking disk space]
+cindex:[disk space, checking]
+cindex:[spool directory,checking space]
+The four %check_...% options allow for checking of disk resources before a
+message is accepted.
+
+When any of these options are set, they apply to all incoming messages. If you
+want to apply different checks to different kinds of message, you can do so
+by testing the the variables $log_inodes$, $log_space$,
+$spool_inodes$, and $spool_space$ in an ACL with appropriate additional
+conditions.
+
+
+%check_spool_space% and %check_spool_inodes% check the spool partition if
+either value is greater than zero, for example:
+
+ check_spool_space = 10M
+ check_spool_inodes = 100
+
+The spool partition is the one that contains the directory defined by
+SPOOL_DIRECTORY in _Local/Makefile_. It is used for holding messages in
+transit.
+
+%check_log_space% and %check_log_inodes% check the partition in which log
+files are written if either is greater than zero. These should be set only if
+%log_file_path% and %spool_directory% refer to different partitions.
+
+If there is less space or fewer inodes than requested, Exim refuses to accept
+incoming mail. In the case of SMTP input this is done by giving a 452 temporary
+error response to the MAIL command. If ESMTP is in use and there was a
+SIZE parameter on the MAIL command, its value is added to the
+%check_spool_space% value, and the check is performed even if
+%check_spool_space% is zero, unless %no_smtp_check_spool_space% is set.
+
+The values for %check_spool_space% and %check_log_space% are held as a
+number of kilobytes. If a non-multiple of 1024 is specified, it is rounded up.
+
+For non-SMTP input and for batched SMTP input, the test is done at start-up; on
+failure a message is written to stderr and Exim exits with a non-zero code, as
+it obviously cannot send an error message of any kind.
+
+oindex:[%daemon_smtp_ports%]
+`..'=
+%daemon_smtp_ports%, Use: 'main', Type: 'string', Default: `smtp`
+===
+
+cindex:[port,for daemon]
+cindex:[TCP/IP,setting listening ports]
+This option specifies one or more default SMTP ports on which the Exim daemon
+listens. See chapter <<CHAPinterfaces>> for details of how it is used. For
+backward compatibility, %daemon_smtp_port% (singular) is a synonym.
+
+
+oindex:[%delay_warning%]
+`..'=
+%delay_warning%, Use: 'main', Type: 'time list', Default: '24h'
+===
+
+cindex:[warning of delay]
+cindex:[delay warning, specifying]
+When a message is delayed, Exim sends a warning message to the sender at
+intervals specified by this option. The data is a colon-separated list of times
+after which to send warning messages.
+
+If the value of the option is an empty string or a zero time, no warnings are
+sent.
+
+Up to 10 times may be given. If a message has been on the queue for longer than
+the last time, the last interval between the times is used to compute
+subsequent warning times. For example, with
+
+ delay_warning = 4h:8h:24h
+
+the first message is sent after 4 hours, the second after 8 hours, and
+the third one after 24 hours. After that, messages are sent every 16 hours,
+because that is the interval between the last two times on the list. If you set
+just one time, it specifies the repeat interval. For example, with:
+
+ delay_warning = 6h
+
+messages are repeated every six hours. To stop warnings after a given time, set
+a very large time at the end of the list. For example:
+
+ delay_warning = 2h:12h:99d
+
+
+
+oindex:[%delay_warning_condition%]
+`..'=
+%delay_warning_condition%, Use: 'main', Type: 'string'!!, Default: 'see below'
+===
+
+The string is expanded at the time a warning message might be sent. If all the
+deferred addresses have the same domain, it is set in $domain$ during the
+expansion. Otherwise $domain$ is empty. If the result of the expansion is a
+forced failure, an empty string, or a string matching any of ``0'', ``no'' or
+``false'' (the comparison being done caselessly) then the warning message is not
+sent. The default is
+
+....
+delay_warning_condition = \
+ ${if match{$h_precedence:}{(?i)bulk|list|junk}{no}{yes}}
+....
+
+which suppresses the sending of warnings about messages that have ``bulk'',
+``list'' or ``junk'' in a 'Precedence:' header.
+
+oindex:[%deliver_drop_privilege%]
+`..'=
+%deliver_drop_privilege%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[unprivileged delivery]
+cindex:[delivery,unprivileged]
+If this option is set true, Exim drops its root privilege at the start of a
+delivery process, and runs as the Exim user throughout. This severely restricts
+the kinds of local delivery that are possible, but is viable in certain types
+of configuration. There is a discussion about the use of root privilege in
+chapter <<CHAPsecurity>>.
+
+oindex:[%deliver_queue_load_max%]
+`..'=
+%deliver_queue_load_max%, Use: 'main', Type: 'fixed-point', Default: 'unset'
+===
+
+cindex:[load average]
+cindex:[queue runner,abandoning]
+When this option is set, a queue run is abandoned if the system load average
+becomes greater than the value of the option. The option has no effect on
+ancient operating systems on which Exim cannot determine the load average.
+See also %queue_only_load% and %smtp_load_reserve%.
+
+
+oindex:[%delivery_date_remove%]
+`..'=
+%delivery_date_remove%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:['Delivery-date:' header line]
+Exim's transports have an option for adding a 'Delivery-date:' header to a
+message when it is delivered -- in exactly the same way as 'Return-path:' is
+handled. 'Delivery-date:' records the actual time of delivery. Such headers
+should not be present in incoming messages, and this option causes them to be
+removed at the time the message is received, to avoid any problems that might
+occur when a delivered message is subsequently sent on to some other recipient.
+
+oindex:[%dns_again_means_nonexist%]
+`..'=
+%dns_again_means_nonexist%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[DNS,``try again'' response; overriding]
+DNS lookups give a ``try again'' response for the DNS errors ``non-authoritative
+host not found'' and ``SERVERFAIL''. This can cause Exim to keep trying to
+deliver a message, or to give repeated temporary errors to incoming mail.
+Sometimes the effect is caused by a badly set up name server and may persist
+for a long time. If a domain which exhibits this problem matches anything in
+%dns_again_means_nonexist%, it is treated as if it did not exist. This
+option should be used with care.
+You can make it apply to reverse lookups by a setting such as this:
+
+ dns_again_means_nonexist = *.in-addr.arpa
+
+This option applies to all DNS lookups that Exim does. The ^dnslookup^ router
+has some options of its own for controlling what happens when lookups for MX or
+SRV records give temporary errors. These more specific options are applied
+after the global option.
+
+oindex:[%dns_check_names_pattern%]
+`..'=
+%dns_check_names_pattern%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+cindex:[DNS,pre-check of name syntax]
+When this option is set to a non-empty string, it causes Exim to check domain
+names for illegal characters before handing them to the DNS resolver, because
+some resolvers give temporary errors for malformed names. If a domain name
+contains any illegal characters, a ``not found'' result is forced, and the
+resolver is not called. The check is done by matching the domain name against a
+regular expression, which is the value of this option. The default pattern is
+
+....
+dns_check_names_pattern = \
+ (?i)^(?>(?(1)\.|())[^\W_](?>[a-z0-9-]*[^\W_])?)+$
+....
+
+which permits only letters, digits, and hyphens in components, but they may not
+start or end with a hyphen.
+If you set %allow_utf8_domains%, you must modify this pattern, or set the
+option to an empty string.
+
+
+oindex:[%dns_ipv4_lookup%]
+`..'=
+%dns_ipv4_lookup%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[IPv6,DNS lookup for AAAA records]
+cindex:[DNS,IPv6 lookup for AAAA records]
+When Exim is compiled with IPv6 support, it looks for IPv6 address records
+(AAAA and, if configured, A6) as well as IPv4 address records when trying to
+find IP addresses for hosts, unless the host's domain matches this list.
+
+This is a fudge to help with name servers that give big delays or otherwise do
+not work for the new IPv6 record types. If Exim is handed an IPv6 address
+record as a result of an MX lookup, it always recognizes it, and may as a
+result make an outgoing IPv6 connection. All this option does is to make Exim
+look only for IPv4-style A records when it needs to find an IP address for a
+host name. In due course, when the world's name servers have all been upgraded,
+there should be no need for this option.
+
+
+oindex:[%dns_retrans%]
+`..'=
+%dns_retrans%, Use: 'main', Type: 'time', Default: '0s'
+===
+
+cindex:[DNS,resolver options]
+The options %dns_retrans% and %dns_retry% can be used to set the
+retransmission and retry parameters for DNS lookups. Values of zero (the
+defaults) leave the system default settings unchanged. The first value is the
+time between retries, and the second is the number of retries. It isn't
+totally clear exactly how these settings affect the total time a DNS lookup may
+take. I haven't found any documentation about timeouts on DNS lookups; these
+parameter values are available in the external resolver interface structure,
+but nowhere does it seem to describe how they are used or what you might want
+to set in them.
+
+
+oindex:[%dns_retry%]
+`..'=
+%dns_retry%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+See %dns_retrans% above.
+
+
+oindex:[%drop_cr%]
+`..'=
+%drop_cr%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+This is an obsolete option that is now a no-op. It used to affect the way Exim
+handled CR and LF characters in incoming messages. What happens now is
+described in section <<SECTlineendings>>.
+
+
+oindex:[%envelope_to_remove%]
+`..'=
+%envelope_to_remove%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:['Envelope-to:' header line]
+Exim's transports have an option for adding an 'Envelope-to:' header to a
+message when it is delivered -- in exactly the same way as 'Return-path:' is
+handled. 'Envelope-to:' records the original recipient address from the
+messages's envelope that caused the delivery to happen. Such headers should not
+be present in incoming messages, and this option causes them to be removed at
+the time the message is received, to avoid any problems that might occur when a
+delivered message is subsequently sent on to some other recipient.
+
+
+oindex:[%errors_copy%]
+`..'=
+%errors_copy%, Use: 'main', Type: 'string list'!!, Default: 'unset'
+===
+
+cindex:[bounce message,copy to other address]
+cindex:[copy of bounce message]
+Setting this option causes Exim to send bcc copies of bounce messages that it
+generates to other addresses. *Note*: this does not apply to bounce messages
+coming from elsewhere. The value of the option is a colon-separated list of
+items. Each item consists of a pattern, terminated by white space, followed by
+a comma-separated list of email addresses. If a pattern contains spaces, it
+must be enclosed in double quotes.
+
+Each pattern is processed in the same way as a single item in an address list
+(see section <<SECTaddresslist>>). When a pattern matches the recipient of the
+bounce message, the message is copied to the addresses on the list. The items
+are scanned in order, and once a matching one is found, no further items are
+examined. For example:
+
+....
+errors_copy = spqr@mydomain postmaster@mydomain.example :\
+ rqps@mydomain hostmaster@mydomain.example,\
+ postmaster@mydomain.example
+....
+
+The address list is expanded before use. The expansion variables
+$local_part$ and $domain$ are set from the original recipient of the error
+message, and if there was any wildcard matching in the pattern, the expansion
+
+cindex:[numerical variables ($1$ $2$ etc),in %errors_copy%]
+variables $0$, $1$, etc. are set in the normal way.
+
+
+oindex:[%errors_reply_to%]
+`..'=
+%errors_reply_to%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[bounce message,'Reply-to:' in]
+Exim's bounce and delivery warning messages contain the header line
+
+ From: Mail Delivery System <Mailer-Daemon@<qualify-domain>>
+
+where <'qualify-domain'> is the value of the %qualify_domain% option.
+Experience shows that people reply to bounce messages. If the
+%errors_reply_to% option is set, a 'Reply-To:' header is added to bounce and
+warning messages. For example:
+
+ errors_reply_to = postmaster@my.domain.example
+
+The value of the option is not expanded. It must specify a valid RFC 2822
+address.
+
+
+oindex:[%exim_group%]
+`..'=
+%exim_group%, Use: 'main', Type: 'string', Default: 'compile-time configured'
+===
+
+cindex:[gid (group id),Exim's own]
+cindex:[Exim group]
+This option changes the gid under which Exim runs when it gives up root
+privilege. The default value is compiled into the binary. The value of this
+option is used only when %exim_user% is also set. Unless it consists entirely
+of digits, the string is looked up using 'getgrnam()', and failure causes a
+configuration error. See chapter <<CHAPsecurity>> for a discussion of security
+issues.
+
+
+oindex:[%exim_path%]
+`..'=
+%exim_path%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+cindex:[Exim binary, path name]
+This option specifies the path name of the Exim binary, which is used when Exim
+needs to re-exec itself. The default is set up to point to the file 'exim' in
+the directory configured at compile time by the BIN_DIRECTORY setting. It
+is necessary to change %exim_path% if, exceptionally, Exim is run from some
+other place.
+*Warning*: Do not use a macro to define the value of this option, because
+you will break those Exim utilities that scan the configuration file to find
+where the binary is. (They then use the %-bP% option to extract option
+settings such as the value of %spool_directory%.)
+
+
+oindex:[%exim_user%]
+`..'=
+%exim_user%, Use: 'main', Type: 'string', Default: 'compile-time configured'
+===
+
+cindex:[uid (user id),Exim's own]
+cindex:[Exim user]
+This option changes the uid under which Exim runs when it gives up root
+privilege. The default value is compiled into the binary. Ownership of the run
+time configuration file and the use of the %-C% and %-D% command line options
+is checked against the values in the binary, not what is set here.
+
+Unless it consists entirely of digits, the string is looked up using
+'getpwnam()', and failure causes a configuration error. If %exim_group% is
+not also supplied, the gid is taken from the result of 'getpwnam()' if it is
+used. See chapter <<CHAPsecurity>> for a discussion of security issues.
+
+
+oindex:[%extra_local_interfaces%]
+`..'=
+%extra_local_interfaces%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+This option defines network interfaces that are to be considered local when
+routing, but which are not used for listening by the daemon. See section
+<<SECTreclocipadd>> for details.
+
+
+oindex:[%extract_addresses_remove_arguments%]
+`..'=
+%extract_addresses_remove_ ~arguments%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[%-t% option]
+cindex:[command line,addresses with %-t%]
+cindex:[Sendmail compatibility,%-t% option]
+According to some Sendmail documentation (Sun, IRIX, HP-UX), if any addresses
+are present on the command line when the %-t% option is used to build an
+envelope from a message's 'To:', 'Cc:' and 'Bcc:' headers, the command line
+addresses are removed from the recipients list. This is also how Smail behaves.
+However, other Sendmail documentation (the O'Reilly book) states that command
+line addresses are added to those obtained from the header lines. When
+%extract_addresses_remove_arguments% is true (the default), Exim subtracts
+argument headers. If it is set false, Exim adds rather than removes argument
+addresses.
+
+
+oindex:[%finduser_retries%]
+`..'=
+%finduser_retries%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[NIS, looking up users; retrying]
+On systems running NIS or other schemes in which user and group information is
+distributed from a remote system, there can be times when 'getpwnam()' and
+related functions fail, even when given valid data, because things time out.
+Unfortunately these failures cannot be distinguished from genuine ``not found''
+errors. If %finduser_retries% is set greater than zero, Exim will try that
+many extra times to find a user or a group, waiting for one second between
+retries.
+
+cindex:[_/etc/passwd_, multiple reading of]
+You should not set this option greater than zero if your user information is in
+a traditional _/etc/passwd_ file, because it will cause Exim needlessly to
+search the file multiple times for non-existent users, and also cause delay.
+
+
+
+oindex:[%freeze_tell%]
+`..'=
+%freeze_tell%, Use: 'main', "Type: 'string list, comma separated'", Default: 'unset'
+===
+
+cindex:[freezing messages,sending a message when freezing]
+On encountering certain errors, or when configured to do so in a system filter,
+or in an ACL,
+Exim freezes a message. This means that no further delivery attempts take place
+until an administrator (or the %auto_thaw% feature) thaws the message. If
+%freeze_tell% is set, Exim generates a warning message whenever it freezes
+something, unless the message it is freezing is a
+locally-generated
+bounce message. (Without this exception there is the possibility of looping.)
+The warning message is sent to the addresses supplied as the comma-separated
+value of this option. If several of the message's addresses cause freezing,
+only a single message is sent.
+If the freezing was automatic, the reason(s) for freezing can be found in the
+message log. If you configure freezing in a filter or ACL, you must arrange for
+any logging that you require.
+
+
+oindex:[%gecos_name%]
+`..'=
+%gecos_name%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[HP-UX]
+cindex:[``gecos'' field, parsing]
+Some operating systems, notably HP-UX, use the ``gecos'' field in the system
+password file to hold other information in addition to users' real names. Exim
+looks up this field for use when it is creating 'Sender:' or 'From:' headers.
+If either %gecos_pattern% or %gecos_name% are unset, the contents of the
+field are used unchanged, except that, if an ampersand is encountered, it is
+replaced by the user's login name with the first character forced to
+upper case, since this is a convention that is observed on many systems.
+
+When these options are set, %gecos_pattern% is treated as a regular expression
+that is to be applied to the field (again with & replaced by the login name),
+and if it matches, %gecos_name% is expanded and used as the user's name.
+
+cindex:[numerical variables ($1$ $2$ etc),in %gecos_name%]
+Numeric variables such as $1$, $2$, etc. can be used in the expansion to
+pick up sub-fields that were matched by the pattern. In HP-UX, where the user's
+name terminates at the first comma, the following can be used:
+
+ gecos_pattern = ([^,]*)
+ gecos_name = $1
+
+
+
+oindex:[%gecos_pattern%]
+`..'=
+%gecos_pattern%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+See %gecos_name% above.
+
+
+oindex:[%headers_charset%]
+`..'=
+%headers_charset%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+This option sets a default character set for translating from encoded MIME
+``words'' in header lines, when referenced by an $h_xxx$ expansion item. The
+default is the value of HEADERS_CHARSET in _Local/Makefile_. The
+ultimate default is ISO-8859-1. For more details see the description of header
+insertions in section <<SECTexpansionitems>>.
+
+
+
+oindex:[%header_maxsize%]
+`..'=
+%header_maxsize%, Use: 'main', Type: 'integer', Default: 'see below'
+===
+
+cindex:[header section,maximum size of]
+cindex:[limit,size of message header section]
+This option controls the overall maximum size of a message's header
+section. The default is the value of HEADER_MAXSIZE in
+_Local/Makefile_; the default for that is 1M. Messages with larger header
+sections are rejected.
+
+
+oindex:[%header_line_maxsize%]
+`..'=
+%header_line_maxsize%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[header lines,maximum size of]
+cindex:[limit,size of one header line]
+This option limits the length of any individual header line in a message, after
+all the continuations have been joined together. Messages with individual
+header lines that are longer than the limit are rejected. The default value of
+zero means ``no limit''.
+
+
+
+
+oindex:[%helo_accept_junk_hosts%]
+`..'=
+%helo_accept_junk_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[HELO,accepting junk data]
+cindex:[EHLO,accepting junk data]
+Exim checks the syntax of HELO and EHLO commands for incoming SMTP
+mail, and gives an error response for invalid data. Unfortunately, there are
+some SMTP clients that send syntactic junk. They can be accommodated by setting
+this option. Note that this is a syntax check only. See %helo_verify_hosts%
+if you want to do semantic checking.
+See also %helo_allow_chars% for a way of extending the permitted character
+set.
+
+
+oindex:[%helo_allow_chars%]
+`..'=
+%helo_allow_chars%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[HELO,underscores in]
+cindex:[EHLO,underscores in]
+cindex:[underscore in EHLO/HELO]
+This option can be set to a string of rogue characters that are permitted in
+all EHLO and HELO names in addition to the standard letters, digits,
+hyphens, and dots. If you really must allow underscores, you can set
+
+ helo_allow_chars = _
+
+Note that the value is one string, not a list.
+
+
+oindex:[%helo_lookup_domains%]
+`..'=
+%helo_lookup_domains%, Use: 'main', Type: 'domain list'!!, Default: `@:@[]`
+===
+
+cindex:[HELO,forcing reverse lookup]
+cindex:[EHLO,forcing reverse lookup]
+If the domain given by a client in a HELO or EHLO command matches this
+list, a reverse lookup is done in order to establish the host's true name. The
+default forces a lookup if the client host gives the server's name or any of
+its IP addresses (in brackets), something that broken clients have been seen to
+do.
+
+
+oindex:[%helo_try_verify_hosts%]
+`..'=
+%helo_try_verify_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[HELO verifying, optional]
+cindex:[EHLO verifying, optional]
+The RFCs mandate that a server must not reject a message because it doesn't
+like the HELO or EHLO command. By default, Exim just checks the syntax
+of these commands (see %helo_accept_junk_hosts% and %helo_allow_chars%
+above). However, some sites like to be stricter. If the calling host matches
+%helo_try_verify_hosts%, Exim checks that the host name given in the HELO
+or EHLO command either:
+
+- is an IP literal matching the calling address of the host (the RFCs
+specifically allow this), or
+
+- cindex:[DNS,reverse lookup]
+cindex:[reverse DNS lookup]
+matches the host name that Exim obtains by doing a reverse lookup of the
+calling host address, or
+
+- when looked up using 'gethostbyname()' (or 'getipnodebyname()' when
+available) yields the calling host address.
+
+However, the EHLO or HELO command is not rejected if any of the checks
+fail. Processing continues, but the result of the check is remembered, and can
+be detected later in an ACL by the `verify = helo` condition. If you want
+verification failure to cause rejection of EHLO or HELO, use
+%helo_verify_hosts% instead.
+
+
+
+oindex:[%helo_verify_hosts%]
+`..'=
+%helo_verify_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[HELO verifying, mandatory]
+cindex:[EHLO verifying, mandatory]
+For hosts that match this option, Exim checks the host name given in the
+HELO or EHLO in the same way as for %helo_try_verify_hosts%. If the
+check fails, the HELO or EHLO command is rejected with a 550 error, and
+entries are written to the main and reject logs. If a MAIL command is
+received before EHLO or HELO, it is rejected with a
+503
+error.
+
+
+oindex:[%hold_domains%]
+`..'=
+%hold_domains%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[domain,delaying delivery]
+cindex:[delivery,delaying certain domains]
+This option allows mail for particular domains to be held on the queue
+manually. The option is overridden if a message delivery is forced with the
+%-M%, %-qf%, %-Rf% or %-Sf% options, and also while testing or verifying
+addresses using %-bt% or %-bv%. Otherwise, if a domain matches an item in
+%hold_domains%, no routing or delivery for that address is done, and it is
+deferred every time the message is looked at.
+
+This option is intended as a temporary operational measure for delaying the
+delivery of mail while some problem is being sorted out, or some new
+configuration tested. If you just want to delay the processing of some
+domains until a queue run occurs, you should use %queue_domains% or
+%queue_smtp_domains%, not %hold_domains%.
+
+A setting of %hold_domains% does not override Exim's code for removing
+messages from the queue if they have been there longer than the longest retry
+time in any retry rule. If you want to hold messages for longer than the normal
+retry times, insert a dummy retry rule with a long retry time.
+
+
+oindex:[%host_lookup%]
+`..'=
+%host_lookup%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[host name lookup, forcing]
+Exim does not look up the name of a calling host from its IP address unless it
+is required to compare against some host list, or the host matches
+%helo_try_verify_hosts% or %helo_verify_hosts%, or the host matches this
+option (which normally contains IP addresses rather than host names). The
+default configuration file contains
+
+ host_lookup = *
+
+which causes a lookup to happen for all hosts. If the expense of these lookups
+is felt to be too great, the setting can be changed or removed.
+
+After a successful reverse lookup, Exim does a forward lookup on the name it
+has obtained, to verify that it yields the IP address that it started with. If
+this check fails, Exim behaves as if the name lookup failed.
+
+After any kind of failure, the host name (in $sender_host_name$) remains
+unset, and $host_lookup_failed$ is set to the string ``1''. See also
+%dns_again_means_nonexist%, %helo_lookup_domains%, and `verify =
+reverse_host_lookup` in ACLs.
+
+
+oindex:[%host_lookup_order%]
+`..'=
+%host_lookup_order%, Use: 'main', Type: 'string list', Default: `bydns:byaddr`
+===
+
+This option specifies the order of different lookup methods when Exim is trying
+to find a host name from an IP address. The default is to do a DNS lookup
+first, and then to try a local lookup (using 'gethostbyaddr()' or equivalent)
+if that fails. You can change the order of these lookups, or omit one entirely,
+if you want.
+
+*Warning*: the ``byaddr'' method does not always yield aliases when there are
+multiple PTR records in the DNS and the IP address is not listed in
+_/etc/hosts_. Different operating systems give different results in this
+case. That is why the default tries a DNS lookup first.
+
+
+
+oindex:[%host_reject_connection%]
+`..'=
+%host_reject_connection%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[host,rejecting connections from]
+If this option is set, incoming SMTP calls from the hosts listed are rejected
+as soon as the connection is made.
+This option is obsolete, and retained only for backward compatibility, because
+nowadays the ACL specified by %acl_smtp_connect% can also reject incoming
+connections immediately.
+
+The ability to give an immediate rejection (either by this option or using an
+ACL) is provided for use in unusual cases. Many hosts will just try again,
+sometimes without much delay. Normally, it is better to use an ACL to reject
+incoming messages at a later stage, such as after RCPT commands. See
+chapter <<CHAPACL>>.
+
+
+oindex:[%hosts_connection_nolog%]
+`..'=
+%hosts_connection_nolog%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[host,not logging connections from]
+This option defines a list of hosts for which connection logging does not
+happen, even though the %smtp_connection% log selector is set. For example,
+you might want not to log SMTP connections from local processes, or from
+127.0.0.1, or from your local LAN. This option is consulted in the main loop of
+the daemon; you should therefore strive to restrict its value to a short inline
+list of IP addresses and networks. To disable logging SMTP connections from
+local processes, you must create a host list with an empty item. For example:
+
+ hosts_connection_nolog = :
+
+If the %smtp_connection% log selector is not set, this option has no effect.
+
+
+
+oindex:[%hosts_treat_as_local%]
+`..'=
+%hosts_treat_as_local%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[local host,domains treated as]
+cindex:[host,treated as local]
+If this option is set, any host names that match the domain list are treated as
+if they were the local host when Exim is scanning host lists obtained from MX
+records
+or other sources. Note that the value of this option is a domain list, not a
+host list, because it is always used to check host names, not IP addresses.
+
+This option also applies when Exim is matching the special items
+`@mx_any`, `@mx_primary`, and `@mx_secondary` in a domain list (see
+section <<SECTdomainlist>>), and when checking the %hosts% option in the ^smtp^
+transport for the local host (see the %allow_localhost% option in that
+transport).
+See also %local_interfaces%, %extra_local_interfaces%, and chapter
+<<CHAPinterfaces>>, which contains a discussion about local network interfaces
+and recognising the local host.
+
+
+oindex:[%ignore_bounce_errors_after%]
+`..'=
+%ignore_bounce_errors_after%, Use: 'main', Type: 'time', Default: '10w'
+===
+
+cindex:[bounce message,discarding]
+cindex:[discarding bounce message]
+This option affects the processing of bounce messages that cannot be delivered,
+that is, those that suffer a permanent delivery failure. (Bounce messages that
+suffer temporary delivery failures are of course retried in the usual way.)
+
+After a permanent delivery failure, bounce messages are frozen,
+because there is no sender to whom they can be returned. When a frozen bounce
+message has been on the queue for more than the given time, it is unfrozen at
+the next queue run, and a further delivery is attempted. If delivery fails
+again, the bounce message is discarded. This makes it possible to keep failed
+bounce messages around for a shorter time than the normal maximum retry time
+for frozen messages. For example,
+
+ ignore_bounce_errors_after = 12h
+
+retries failed bounce message deliveries after 12 hours, discarding any further
+failures. If the value of this option is set to a zero time period, bounce
+failures are discarded immediately. Setting a very long time (as in the default
+value) has the effect of disabling this option. For ways of automatically
+dealing with other kinds of frozen message, see %auto_thaw% and
+%timeout_frozen_after%.
+
+
+oindex:[%ignore_fromline_hosts%]
+`..'=
+%ignore_fromline_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[``From'' line]
+cindex:[UUCP,``From'' line]
+Some broken SMTP clients insist on sending a UUCP-like ``From'' line before the
+headers of a message. By default this is treated as the start of the message's
+body, which means that any following headers are not recognized as such. Exim
+can be made to ignore it by setting %ignore_fromline_hosts% to match those
+hosts that insist on sending it. If the sender is actually a local process
+rather than a remote host, and is using %-bs% to inject the messages,
+%ignore_fromline_local% must be set to achieve this effect.
+
+
+oindex:[%ignore_fromline_local%]
+`..'=
+%ignore_fromline_local%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+See %ignore_fromline_hosts% above.
+
+
+oindex:[%keep_malformed%]
+`..'=
+%keep_malformed%, Use: 'main', Type: 'time', Default: '4d'
+===
+
+This option specifies the length of time to keep messages whose spool files
+have been corrupted in some way. This should, of course, never happen. At the
+next attempt to deliver such a message, it gets removed. The incident is
+logged.
+
+
+oindex:[%ldap_default_servers%]
+`..'=
+%ldap_default_servers%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[LDAP,default servers]
+This option provides a list of LDAP servers which are tried in turn when an
+LDAP query does not contain a server. See section <<SECTforldaque>> for details
+of LDAP queries. This option is available only when Exim has been built with
+LDAP support.
+
+
+oindex:[%ldap_version%]
+`..'=
+%ldap_version%, Use: 'main', Type: 'integer', Default: 'unset'
+===
+
+cindex:[LDAP protocol version, forcing]
+This option can be used to force Exim to set a specific protocol version for
+LDAP. If it option is unset, it is shown by the %-bP% command line option as
+-1. When this is the case, the default is 3 if LDAP_VERSION3 is defined in
+the LDAP headers; otherwise it is 2. This option is available only when Exim
+has been built with LDAP support.
+
+
+
+oindex:[%local_from_check%]
+`..'=
+%local_from_check%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:['Sender:' header line,disabling addition of]
+cindex:['From:' header line,disabling checking of]
+When a message is submitted locally (that is, not over a TCP/IP connection) by
+an untrusted user, Exim removes any existing 'Sender:' header line, and checks
+that the 'From:' header line matches the login of the calling user and the
+domain specified by %qualify_domain%.
+
+*Note*: An unqualified address (no domain) in the 'From:' header in a
+locally submitted message is automatically qualified by Exim, unless the
+%-bnq% command line option is used.
+
+You can use %local_from_prefix% and %local_from_suffix% to permit affixes
+on the local part. If the 'From:' header line does not match, Exim adds a
+'Sender:' header with an address constructed from the calling user's login and
+the default qualify domain.
+
+If %local_from_check% is set false, the 'From:' header check is disabled,
+and no 'Sender:' header is ever added. If, in addition, you want to retain
+'Sender:' header lines supplied by untrusted users, you must also set
+%local_sender_retain% to be true.
+
+cindex:[envelope sender]
+These options affect only the header lines in the message. The envelope sender
+is still forced to be the login id at the qualify domain unless
+%untrusted_set_sender% permits the user to supply an envelope sender.
+
+For messages received over TCP/IP, an ACL can specify ``submission mode'' to
+request similar header line checking. See section <<SECTthesenhea>>, which has
+more details about 'Sender:' processing.
+
+
+
+
+oindex:[%local_from_prefix%]
+`..'=
+%local_from_prefix%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+When Exim checks the 'From:' header line of locally submitted messages for
+matching the login id (see %local_from_check% above), it can be configured to
+ignore certain prefixes and suffixes in the local part of the address. This is
+done by setting %local_from_prefix% and/or %local_from_suffix% to
+appropriate lists, in the same form as the %local_part_prefix% and
+%local_part_suffix% router options (see chapter <<CHAProutergeneric>>). For
+example, if
+
+ local_from_prefix = *-
+
+is set, a 'From:' line containing
+
+ From: anything-user@your.domain.example
+
+will not cause a 'Sender:' header to be added if 'user@your.domain.example'
+matches the actual sender address that is constructed from the login name and
+qualify domain.
+
+
+oindex:[%local_from_suffix%]
+`..'=
+%local_from_suffix%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+See %local_from_prefix% above.
+
+
+oindex:[%local_interfaces%]
+`..'=
+%local_interfaces%, Use: 'main', Type: 'string list', Default: 'see below'
+===
+
+This option controls which network interfaces are used by the daemon for
+listening; they are also used to identify the local host when routing. Chapter
+<<CHAPinterfaces>> contains a full description of this option and the related
+options
+
+%daemon_smtp_ports%, %extra_local_interfaces%, %hosts_treat_as_local%,
+and %tls_on_connect_ports%.
+
+The default value for %local_interfaces% is
+
+ local_interfaces = 0.0.0.0
+
+when Exim is built without IPv6 support; otherwise it is
+
+ local_interfaces = <; ::0 ; 0.0.0.0
+
+
+
+oindex:[%local_scan_timeout%]
+`..'=
+%local_scan_timeout%, Use: 'main', Type: 'time', Default: '5m'
+===
+
+cindex:[timeout,for 'local_scan()' function]
+cindex:['local_scan()' function,timeout]
+This timeout applies to the 'local_scan()' function (see chapter
+<<CHAPlocalscan>>). Zero means ``no timeout''. If the timeout is exceeded, the
+incoming message is rejected with a temporary error if it is an SMTP message.
+For a non-SMTP message, the message is dropped and Exim ends with a non-zero
+code. The incident is logged on the main and reject logs.
+
+
+
+oindex:[%local_sender_retain%]
+`..'=
+%local_sender_retain%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:['Sender:' header line,retaining from local submission]
+When a message is submitted locally (that is, not over a TCP/IP connection) by
+an untrusted user, Exim removes any existing 'Sender:' header line. If you
+do not want this to happen, you must set %local_sender_retain%, and you must
+also set %local_from_check% to be false (Exim will complain if you do not).
+Section <<SECTthesenhea>> has more details about 'Sender:' processing.
+
+
+
+
+oindex:[%localhost_number%]
+`..'=
+%localhost_number%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[host,locally unique number for]
+cindex:[message ids, with multiple hosts]
+Exim's message ids are normally unique only within the local host. If
+uniqueness among a set of hosts is required, each host must set a different
+value for the %localhost_number% option. The string is expanded immediately
+after reading the configuration file (so that a number can be computed from the
+host name, for example) and the result of the expansion must be a number in the
+range 0--16 (or 0--10 on operating systems with case-insensitive file systems).
+This is available in subsequent string expansions via the variable
+$localhost_number$. When %localhost_number is set%, the final two
+characters of the message id, instead of just being a fractional part of the
+time, are computed from the time and the local host number as described in
+section <<SECTmessiden>>.
+
+
+
+oindex:[%log_file_path%]
+`..'=
+%log_file_path%, Use: 'main', Type: 'string list'!!, Default: 'set at compile time'
+===
+
+cindex:[log,file path for]
+This option sets the path which is used to determine the names of Exim's log
+files, or indicates that logging is to be to syslog, or both. It is expanded
+when Exim is entered, so it can, for example, contain a reference to the host
+name. If no specific path is set for the log files at compile or run time, they
+are written in a sub-directory called _log_ in Exim's spool directory.
+Chapter <<CHAPlog>> contains further details about Exim's logging, and section
+<<SECTwhelogwri>> describes how the contents of %log_file_path% are used. If
+this string is fixed at your installation (contains no expansion variables) it
+is recommended that you do not set this option in the configuration file, but
+instead supply the path using LOG_FILE_PATH in _Local/Makefile_ so that
+it is available to Exim for logging errors detected early on -- in particular,
+failure to read the configuration file.
+
+
+oindex:[%log_selector%]
+`..'=
+%log_selector%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[log,selectors]
+This option can be used to reduce or increase the number of things that Exim
+writes to its log files. Its argument is made up of names preceded by plus or
+minus characters. For example:
+
+ log_selector = +arguments -retry_defer
+
+A list of possible names and what they control is given in the chapter on
+logging, in section <<SECTlogselector>>.
+
+
+oindex:[%log_timezone%]
+`..'=
+%log_timezone%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[log,timezone for entries]
+By default, the timestamps on log lines are in local time without the
+timezone. This means that if your timezone changes twice a year, the timestamps
+in log lines are ambiguous for an hour when the clocks go back. One way of
+avoiding this problem is to set the timezone to UTC. An alternative is to set
+%log_timezone% true. This turns on the addition of the timezone offset to
+timestamps in log lines. Turning on this option can add quite a lot to the size
+of log files because each line is extended by 6 characters. Note that the
+$tod_log$ variable contains the log timestamp without the zone, but there is
+another variable called $tod_zone$ that contains just the timezone offset.
+
+
+oindex:[%lookup_open_max%]
+`..'=
+%lookup_open_max%, Use: 'main', Type: 'integer', Default: '25'
+===
+
+cindex:[too many open files]
+cindex:[open files, too many]
+cindex:[file,too many open]
+cindex:[lookup,maximum open files]
+cindex:[limit,open files for lookups]
+This option limits the number of simultaneously open files for single-key
+lookups that use regular files (that is, ^lsearch^, ^dbm^, and ^cdb^). Exim
+normally keeps these files open during routing, because often the same file is
+required several times. If the limit is reached, Exim closes the least recently
+used file. Note that if you are using the 'ndbm' library, it actually opens
+two files for each logical DBM database, though it still counts as one for the
+purposes of %lookup_open_max%. If you are getting ``too many open files''
+errors with NDBM, you need to reduce the value of %lookup_open_max%.
+
+
+oindex:[%max_username_length%]
+`..'=
+%max_username_length%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[length of login name]
+cindex:[user name,maximum length]
+cindex:[limit,user name length]
+Some operating systems are broken in that they truncate long arguments to
+'getpwnam()' to eight characters, instead of returning ``no such user''. If
+this option is set greater than zero, any attempt to call 'getpwnam()' with
+an argument that is longer behaves as if 'getpwnam()' failed.
+
+
+
+oindex:[%message_body_visible%]
+`..'=
+%message_body_visible%, Use: 'main', Type: 'integer', Default: '500'
+===
+
+cindex:[body of message,visible size]
+cindex:[message body, visible size]
+This option specifies how much of a message's body is to be included in the
+$message_body$ and $message_body_end$ expansion variables.
+
+
+oindex:[%message_id_header_domain%]
+`..'=
+%message_id_header_domain%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:['Message-ID:' header line]
+If this option is set, the string is expanded and used as the right hand side
+(domain) of the 'Message-ID:' header that Exim creates if a
+locally-originated incoming message does not have one. ``Locally-originated''
+means ``not received over TCP/IP.''
+Otherwise, the primary host name is used.
+Only letters, digits, dot and hyphen are accepted; any other characters are
+replaced by hyphens. If the expansion is forced to fail, or if the result is an
+empty string, the option is ignored.
+
+
+oindex:[%message_id_header_text%]
+`..'=
+%message_id_header_text%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+If this variable is set, the string is expanded and used to augment the text of
+the 'Message-id:' header that Exim creates if a
+locally-originated
+incoming message does not have one. The text of this header is required by RFC
+2822 to take the form of an address. By default, Exim uses its internal message
+id as the local part, and the primary host name as the domain. If this option
+is set, it is expanded, and provided the expansion is not forced to fail, and
+does not yield an empty string, the result is inserted into the header
+immediately before the @, separated from the internal message id by a dot. Any
+characters that are illegal in an address are automatically converted into
+hyphens. This means that variables such as $tod_log$ can be used, because
+the spaces and colons will become hyphens.
+
+
+oindex:[%message_logs%]
+`..'=
+%message_logs%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[message log, disabling]
+cindex:[log,message log; disabling]
+If this option is turned off, per-message log files are not created in the
+_msglog_ spool sub-directory. This reduces the amount of disk I/O required by
+Exim, by reducing the number of files involved in handling a message from a
+minimum of four (header spool file, body spool file, delivery journal, and
+per-message log) to three. The other major I/O activity is Exim's main log,
+which is not affected by this option.
+
+
+oindex:[%message_size_limit%]
+`..'=
+%message_size_limit%, Use: 'main', Type: 'string'!!, Default: '50M'
+===
+
+cindex:[message,size limit]
+cindex:[limit,message size]
+cindex:[size of message, limit]
+This option limits the maximum size of message that Exim will process. The
+value is expanded for each incoming
+connection so, for example, it can be made to depend on the IP address of the
+remote host for messages arriving via TCP/IP. *Note*: This limit cannot be
+made to depend on a message's sender or any other properties of an individual
+message, because it has to be advertised in the server's response to EHLO.
+String expansion failure causes a temporary error. A value of zero means no
+limit, but its use is not recommended. See also %bounce_return_size_limit%.
+
+Incoming SMTP messages are failed with a 552 error if the limit is
+exceeded; locally-generated messages either get a stderr message or a delivery
+failure message to the sender, depending on the %-oe% setting. Rejection of an
+oversized message is logged in both the main and the reject logs. See also the
+generic transport option %message_size_limit%, which limits the size of
+message that an individual transport can process.
+
+
+oindex:[%move_frozen_messages%]
+`..'=
+%move_frozen_messages%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[frozen messages,moving]
+This option, which is available only if Exim has been built with the setting
+
+ SUPPORT_MOVE_FROZEN_MESSAGES=yes
+
+in _Local/Makefile_, causes frozen messages and their message logs to be
+moved from the _input_ and _msglog_ directories on the spool to _Finput_
+and _Fmsglog_, respectively. There is currently no support in Exim or the
+standard utilities for handling such moved messages, and they do not show up in
+lists generated by %-bp% or by the Exim monitor.
+
+
+oindex:[%mua_wrapper%]
+`..'=
+%mua_wrapper%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+Setting this option true causes Exim to run in a very restrictive mode in which
+it passes messages synchronously to a smart host. Chapter <<CHAPnonqueueing>>
+contains a full description of this facility.
+
+
+
+oindex:[%mysql_servers%]
+`..'=
+%mysql_servers%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[MySQL,server list]
+This option provides a list of MySQL servers and associated connection data, to
+be used in conjunction with ^mysql^ lookups (see section <<SECTsql>>). The
+option is available only if Exim has been built with MySQL support.
+
+
+oindex:[%never_users%]
+`..'=
+%never_users%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+Local message deliveries are normally run in processes that are setuid to the
+recipient, and remote deliveries are normally run under Exim's own uid and gid.
+It is usually desirable to prevent any deliveries from running as root, as a
+safety precaution.
+
+When Exim is built, an option called FIXED_NEVER_USERS can be set to a
+list of users that must not be used for local deliveries. This list is fixed in
+the binary and cannot be overridden by the configuration file. By default, it
+contains just the single user name ``root''. The %never_users% runtime option
+can be used to add more users to the fixed list.
+
+If a message is to be delivered as one of the users on the fixed list or the
+%never_users% list, an error occurs, and delivery is deferred. A common
+example is
+
+ never_users = root:daemon:bin
+
+Including root is redundant if it is also on the fixed list, but it does no
+harm. This option overrides the %pipe_as_creator% option of the ^pipe^
+transport driver.
+
+
+oindex:[%oracle_servers%]
+`..'=
+%oracle_servers%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[Oracle,server list]
+This option provides a list of Oracle servers and associated connection data,
+to be used in conjunction with ^oracle^ lookups (see section <<SECTsql>>). The
+option is available only if Exim has been built with Oracle support.
+
+
+oindex:[%percent_hack_domains%]
+`..'=
+%percent_hack_domains%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[``percent hack'']
+cindex:[source routing,in email address]
+cindex:[address,source-routed]
+The ``percent hack'' is the convention whereby a local part containing a percent
+sign is re-interpreted as a new email address, with the percent replaced by @.
+This is sometimes called ``source routing'', though that term is also applied to
+RFC 2822 addresses that begin with an @ character. If this option is set, Exim
+implements the percent facility for those domains listed, but no others. This
+happens before an incoming SMTP address is tested against an ACL.
+
+*Warning*: The ``percent hack'' has often been abused by people who are
+trying to get round relaying restrictions. For this reason, it is best avoided
+if at all possible. Unfortunately, a number of less security-conscious MTAs
+implement it unconditionally. If you are running Exim on a gateway host, and
+routing mail through to internal MTAs without processing the local parts, it is
+a good idea to reject recipient addresses with percent characters in their
+local parts. Exim's default configuration does this.
+
+
+oindex:[%perl_at_start%]
+`..'=
+%perl_at_start%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+This option is available only when Exim is built with an embedded Perl
+interpreter. See chapter <<CHAPperl>> for details of its use.
+
+
+oindex:[%perl_startup%]
+`..'=
+%perl_startup%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+This option is available only when Exim is built with an embedded Perl
+interpreter. See chapter <<CHAPperl>> for details of its use.
+
+
+oindex:[%pgsql_servers%]
+`..'=
+%pgsql_servers%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[PostgreSQL lookup type,server list]
+This option provides a list of PostgreSQL servers and associated connection
+data, to be used in conjunction with ^pgsql^ lookups (see section <<SECTsql>>).
+The option is available only if Exim has been built with PostgreSQL support.
+
+
+oindex:[%pid_file_path%]
+`..'=
+%pid_file_path%, Use: 'main', Type: 'string'!!, Default: 'set at compile time'
+===
+
+cindex:[daemon,pid file path]
+cindex:[pid file, path for]
+This option sets the name of the file to which the Exim daemon writes its
+process id. The string is expanded, so it can contain, for example, references
+to the host name:
+
+ pid_file_path = /var/log/$primary_hostname/exim.pid
+
+If no path is set, the pid is written to the file _exim-daemon.pid_ in Exim's
+spool directory.
+The value set by the option can be overridden by the %-oP% command line
+option. A pid file is not written if a ``non-standard'' daemon is run by means of
+the %-oX% option, unless a path is explicitly supplied by %-oP%.
+
+
+oindex:[%pipelining_advertise_hosts%]
+`..'=
+%pipelining_advertise_hosts%, Use: 'main', Type: 'host list'!!, Default: '\*'
+===
+
+cindex:[PIPELINING advertising, suppressing]
+This option can be used to suppress the advertisement of the SMTP
+PIPELINING extension to specific hosts. When PIPELINING is not
+advertised and %smtp_enforce_sync% is true, an Exim server enforces strict
+synchronization for each SMTP command and response.
+When PIPELINING is advertised, Exim assumes that clients will use it; ``out
+of order'' commands that are ``expected'' do not count as protocol errors (see
+%smtp_max_synprot_errors%).
+
+
+oindex:[%preserve_message_logs%]
+`..'=
+%preserve_message_logs%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[message logs, preserving]
+If this option is set, message log files are not deleted when messages are
+completed. Instead, they are moved to a sub-directory of the spool directory
+called _msglog.OLD_, where they remain available for statistical or debugging
+purposes. This is a dangerous option to set on systems with any appreciable
+volume of mail. Use with care!
+
+
+oindex:[%primary_hostname%]
+`..'=
+%primary_hostname%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+cindex:[name,of local host]
+cindex:[host,name of local]
+cindex:[local host,name of]
+This specifies the name of the current host. It is used in the default EHLO
+or HELO command for outgoing SMTP messages (changeable via the %helo_data%
+option in the ^smtp^ transport),
+and as the default for %qualify_domain%. If it is not set, Exim calls
+'uname()' to find it. If this fails, Exim panics and dies. If the name
+returned by 'uname()' contains only one component, Exim passes it to
+'gethostbyname()' (or 'getipnodebyname()' when available) in order to
+obtain the fully qualified version.
+
+The value of $primary_hostname$ is also used by default in some SMTP
+response messages from an Exim server. This can be changed dynamically by
+setting %smtp_active_hostname%.
+
+
+oindex:[%print_topbitchars%]
+`..'=
+%print_topbitchars%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[printing characters]
+cindex:[8-bit characters]
+By default, Exim considers only those characters whose codes lie in the range
+32--126 to be printing characters. In a number of circumstances (for example,
+when writing log entries) non-printing characters are converted into escape
+sequences, primarily to avoid messing up the layout. If %print_topbitchars% is
+set, code values of 128 and above are also considered to be printing
+characters.
+
+
+oindex:[%process_log_path%]
+`..'=
+%process_log_path%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[process log path]
+cindex:[log,process log]
+cindex:['exiwhat']
+This option sets the name of the file to which an Exim process writes its
+``process log'' when sent a USR1 signal. This is used by the 'exiwhat' utility
+script. If this option is unset, the file called _exim-process.info_ in
+Exim's spool directory is used. The ability to specify the name explicitly can
+be useful in environments where two different Exims are running, using
+different spool directories.
+
+
+oindex:[%prod_requires_admin%]
+`..'=
+%prod_requires_admin%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[%-M% option]
+cindex:[%-R% option]
+cindex:[%-q% option]
+The %-M%, %-R%, and %-q% command-line options require the caller to be an
+admin user unless %prod_requires_admin% is set false. See also
+%queue_list_requires_admin%.
+
+
+oindex:[%qualify_domain%]
+`..'=
+%qualify_domain%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+cindex:[domain,for qualifying addresses]
+cindex:[address,qualification]
+This option specifies the domain name that is added to any envelope sender
+addresses that do not have a domain qualification. It also applies to
+recipient addresses if %qualify_recipient% is not set.
+
+Unqualified addresses are accepted by default only for locally-generated
+messages.
+
+Qualification is also applied to addresses in header lines such as 'From:' and
+'To:' for locally-generated messages, unless the %-bnq% command line option
+is used.
+
+
+Messages from external sources must always contain fully qualified addresses,
+unless the sending host matches %sender_unqualified_hosts% or
+%recipient_unqualified_hosts% (as appropriate), in which case incoming
+addresses are qualified with %qualify_domain% or %qualify_recipient% as
+necessary. Internally, Exim always works with fully qualified envelope
+addresses. If %qualify_domain% is not set, it defaults to the
+%primary_hostname% value.
+
+
+oindex:[%qualify_recipient%]
+`..'=
+%qualify_recipient%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+This option allows you to specify a different domain for qualifying recipient
+addresses to the one that is used for senders. See %qualify_domain% above.
+
+
+
+oindex:[%queue_domains%]
+`..'=
+%queue_domains%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[domain,specifying non-immediate delivery]
+cindex:[queueing incoming messages]
+cindex:[message,queueing certain domains]
+This option lists domains for which immediate delivery is not required.
+A delivery process is started whenever a message is received, but only those
+domains that do not match are processed. All other deliveries wait until the
+next queue run. See also %hold_domains% and %queue_smtp_domains%.
+
+
+oindex:[%queue_list_requires_admin%]
+`..'=
+%queue_list_requires_admin%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[%-bp% option]
+The %-bp% command-line option, which lists the messages that are on the queue,
+requires the caller to be an admin user unless %queue_list_requires_admin%
+is set false. See also %prod_requires_admin%.
+
+
+oindex:[%queue_only%]
+`..'=
+%queue_only%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[queueing incoming messages]
+cindex:[message,queueing unconditionally]
+If %queue_only% is set, a delivery process is not automatically started
+whenever a message is received. Instead, the message waits on the queue for the
+next queue run. Even if %queue_only% is false, incoming messages may not get
+delivered immediately when certain conditions (such as heavy load) occur.
+
+The %-odq% command line has the same effect as %queue_only%. The %-odb% and
+%-odi% command line options override %queue_only% unless
+%queue_only_override% is set false. See also %queue_only_file%,
+%queue_only_load%, and %smtp_accept_queue%.
+
+
+oindex:[%queue_only_file%]
+`..'=
+%queue_only_file%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[queueing incoming messages]
+cindex:[message,queueing by file existence]
+This option can be set to a colon-separated list of absolute path names, each
+one optionally preceded by ``smtp''. When Exim is receiving a message,
+it tests for the existence of each listed path using a call to 'stat()'. For
+each path that exists, the corresponding queuing option is set.
+For paths with no prefix, %queue_only% is set; for paths prefixed by ``smtp'',
+%queue_smtp_domains% is set to match all domains. So, for example,
+
+ queue_only_file = smtp/some/file
+
+causes Exim to behave as if %queue_smtp_domains% were set to ``\*'' whenever
+_/some/file_ exists.
+
+
+oindex:[%queue_only_load%]
+`..'=
+%queue_only_load%, Use: 'main', Type: 'fixed-point', Default: 'unset'
+===
+
+cindex:[load average]
+cindex:[queueing incoming messages]
+cindex:[message,queueing by load]
+If the system load average is higher than this value, incoming messages from
+all sources are queued, and no automatic deliveries are started. If this
+happens during local or remote SMTP input, all subsequent messages on the same
+connection are queued. Deliveries will subsequently be performed by queue
+runner processes. This option has no effect on ancient operating systems on
+which Exim cannot determine the load average. See also
+%deliver_queue_load_max% and %smtp_load_reserve%.
+
+
+oindex:[%queue_only_override%]
+`..'=
+%queue_only_override%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[queueing incoming messages]
+When this option is true, the %-od'x'% command line options override the
+setting of %queue_only% or %queue_only_file% in the configuration file. If
+%queue_only_override% is set false, the %-od'x'% options cannot be used to
+override; they are accepted, but ignored.
+
+
+oindex:[%queue_run_in_order%]
+`..'=
+%queue_run_in_order%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[queue runner,processing messages in order]
+If this option is set, queue runs happen in order of message arrival instead of
+in an arbitrary order. For this to happen, a complete list of the entire queue
+must be set up before the deliveries start. When the queue is all held in a
+single directory (the default),
+
+a single list is created for both the ordered and the non-ordered cases.
+However, if %split_spool_directory% is set, a single list is not created when
+%queue_run_in_order% is false. In this case, the sub-directories are
+processed one at a time (in a random order), and this avoids setting up one
+huge list for the whole queue. Thus, setting %queue_run_in_order% with
+%split_spool_directory% may degrade performance when the queue is large,
+because of the extra work in setting up the single, large list. In most
+situations, %queue_run_in_order% should not be set.
+
+
+
+oindex:[%queue_run_max%]
+`..'=
+%queue_run_max%, Use: 'main', Type: 'integer', Default: '5'
+===
+
+cindex:[queue runner,maximum number of]
+This controls the maximum number of queue runner processes that an Exim daemon
+can run simultaneously. This does not mean that it starts them all at once,
+but rather that if the maximum number are still running when the time comes to
+start another one, it refrains from starting another one. This can happen with
+very large queues and/or very sluggish deliveries. This option does not,
+however, interlock with other processes, so additional queue runners can be
+started by other means, or by killing and restarting the daemon.
+
+
+oindex:[%queue_smtp_domains%]
+`..'=
+%queue_smtp_domains%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[queueing incoming messages]
+cindex:[message,queueing remote deliveries]
+When this option is set, a delivery process is started whenever a message is
+received, routing is performed, and local deliveries take place.
+However, if any SMTP deliveries are required for domains that match
+%queue_smtp_domains%, they are not immediately delivered, but instead the
+message waits on the queue for the next queue run. Since routing of the message
+has taken place, Exim knows to which remote hosts it must be delivered, and so
+when the queue run happens, multiple messages for the same host are delivered
+over a single SMTP connection. The %-odqs% command line option causes all SMTP
+deliveries to be queued in this way, and is equivalent to setting
+%queue_smtp_domains% to ``\*''. See also %hold_domains% and %queue_domains%.
+
+
+oindex:[%receive_timeout%]
+`..'=
+%receive_timeout%, Use: 'main', Type: 'time', Default: '0s'
+===
+
+cindex:[timeout,for non-SMTP input]
+This option sets the timeout for accepting a non-SMTP message, that is, the
+maximum time that Exim waits when reading a message on the standard input. If
+the value is zero, it will wait for ever. This setting is overridden by the
+%-or% command line option. The timeout for incoming SMTP messages is
+controlled by %smtp_receive_timeout%.
+
+oindex:[%received_header_text%]
+`..'=
+%received_header_text%, Use: 'main', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[customizing, 'Received:' header]
+cindex:['Received:' header line,customizing]
+This string defines the contents of the 'Received:' message header that is
+added to each message, except for the timestamp, which is automatically added
+on at the end (preceded by a semicolon). The string is expanded each time it is
+used. If the expansion yields an empty string, no 'Received:' header line is
+added to the message. Otherwise, the string should start with the text
+``Received:'' and conform to the RFC 2822 specification for 'Received:' header
+lines. The default setting is:
+
+....
+received_header_text = Received: \
+ ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
+ {${if def:sender_ident {from $sender_ident }}\
+ ${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
+ by $primary_hostname \
+ ${if def:received_protocol {with $received_protocol}} \
+ ${if def:tls_cipher {($tls_cipher)\n\t}}\
+ (Exim $version_number)\n\t\
+ id $message_id\
+ ${if def:received_for {\n\tfor $received_for}}
+....
+
+Note the use of quotes, to allow the sequences `\n` and `\t` to be used
+for newlines and tabs, respectively. The reference to the TLS cipher is omitted
+when Exim is built without TLS support. The use of conditional expansions
+ensures that this works for both locally generated messages and messages
+received from remote hosts, giving header lines such as the following:
+
+ Received: from scrooge.carol.example ([192.168.12.25] ident=root)
+ by marley.carol.example with esmtp (Exim 4.00)
+ id 16IOWa-00019l-00
+ for chas@dickens.example; Tue, 25 Dec 2001 14:43:44 +0000
+ Received: by scrooge.carol.example with local (Exim 4.00)
+ id 16IOWW-000083-00; Tue, 25 Dec 2001 14:43:41 +0000
+
+Until the body of the message has been received, the timestamp is the time when
+the message started to be received. Once the body has arrived, and all policy
+checks have taken place, the timestamp is updated to the time at which the
+message was accepted.
+
+
+oindex:[%received_headers_max%]
+`..'=
+%received_headers_max%, Use: 'main', Type: 'integer', Default: '30'
+===
+
+cindex:[loop,prevention]
+cindex:[mail loop prevention]
+cindex:['Received:' header line,counting]
+When a message is to be delivered, the number of 'Received:' headers is
+counted, and if it is greater than this parameter, a mail loop is assumed to
+have occurred, the delivery is abandoned, and an error message is generated.
+This applies to both local and remote deliveries.
+
+
+oindex:[%recipient_unqualified_hosts%]
+`..'=
+%recipient_unqualified_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[unqualified addresses]
+cindex:[host,unqualified addresses from]
+This option lists those hosts from which Exim is prepared to accept unqualified
+recipient addresses in message envelopes. The addresses are made fully
+qualified by the addition of the %qualify_recipient% value. This option also
+affects message header lines. Exim does not reject unqualified recipient
+addresses in headers, but it qualifies them only if the message came from a
+host that matches %recipient_unqualified_hosts%,
+or if the message was submitted locally (not using TCP/IP), and the %-bnq%
+option was not set.
+
+
+oindex:[%recipients_max%]
+`..'=
+%recipients_max%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[limit,number of recipients]
+cindex:[recipient,maximum number]
+If this option is set greater than zero, it specifies the maximum number of
+original recipients for any message. Additional recipients that are generated
+by aliasing or forwarding do not count. SMTP messages get a 452 response for
+all recipients over the limit; earlier recipients are delivered as normal.
+Non-SMTP messages with too many recipients are failed, and no deliveries are
+done.
+
+cindex:[RCPT,maximum number of incoming]
+Note that the RFCs specify that an SMTP server should accept at least 100
+RCPT commands in a single message.
+
+
+oindex:[%recipients_max_reject%]
+`..'=
+%recipients_max_reject%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+If this option is set true, Exim rejects SMTP messages containing too many
+recipients by giving 552 errors to the surplus RCPT commands, and a 554
+error to the eventual DATA command. Otherwise (the default) it gives a 452
+error to the surplus RCPT commands and accepts the message on behalf of the
+initial set of recipients. The remote server should then re-send the message
+for the remaining recipients at a later time.
+
+
+oindex:[%remote_max_parallel%]
+`..'=
+%remote_max_parallel%, Use: 'main', Type: 'integer', Default: '2'
+===
+
+cindex:[delivery,parallelism for remote]
+This option controls parallel delivery of one message to a number of remote
+hosts. If the value is less than 2, parallel delivery is disabled, and Exim
+does all the remote deliveries for a message one by one. Otherwise, if a single
+message has to be delivered to more than one remote host, or if several copies
+have to be sent to the same remote host, up to %remote_max_parallel%
+deliveries are done simultaneously. If more than %remote_max_parallel%
+deliveries are required, the maximum number of processes are started, and as
+each one finishes, another is begun. The order of starting processes is the
+same as if sequential delivery were being done, and can be controlled by the
+%remote_sort_domains% option. If parallel delivery takes place while running
+with debugging turned on, the debugging output from each delivery process is
+tagged with its process id.
+
+This option controls only the maximum number of parallel deliveries for one
+message in one Exim delivery process. Because Exim has no central queue
+manager, there is no way of controlling the total number of simultaneous
+deliveries if the configuration allows a delivery attempt as soon as a message
+is received.
+
+cindex:[number of deliveries]
+cindex:[delivery,maximum number of]
+If you want to control the total number of deliveries on the system, you
+need to set the %queue_only% option. This ensures that all incoming messages
+are added to the queue without starting a delivery process. Then set up an Exim
+daemon to start queue runner processes at appropriate intervals (probably
+fairly often, for example, every minute), and limit the total number of queue
+runners by setting the %queue_run_max% parameter. Because each queue runner
+delivers only one message at a time, the maximum number of deliveries that can
+then take place at once is %queue_run_max% multiplied by
+%remote_max_parallel%.
+
+If it is purely remote deliveries you want to control, use
+%queue_smtp_domains% instead of %queue_only%. This has the added benefit of
+doing the SMTP routing before queuing, so that several messages for the same
+host will eventually get delivered down the same connection.
+
+
+oindex:[%remote_sort_domains%]
+`..'=
+%remote_sort_domains%, Use: 'main', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[sorting remote deliveries]
+cindex:[delivery,sorting remote]
+When there are a number of remote deliveries for a message, they are sorted by
+domain into the order given by this list. For example,
+
+ remote_sort_domains = *.cam.ac.uk:*.uk
+
+would attempt to deliver to all addresses in the 'cam.ac.uk' domain first, then
+to those in the %uk% domain, then to any others.
+
+
+oindex:[%retry_data_expire%]
+`..'=
+%retry_data_expire%, Use: 'main', Type: 'time', Default: '7d'
+===
+
+cindex:[hints database,data expiry]
+This option sets a ``use before'' time on retry information in Exim's hints
+database. Any older retry data is ignored. This means that, for example, once a
+host has not been tried for 7 days, Exim behaves as if it has no knowledge of
+past failures.
+
+
+oindex:[%retry_interval_max%]
+`..'=
+%retry_interval_max%, Use: 'main', Type: 'time', Default: '24h'
+===
+
+cindex:[retry,limit on interval]
+cindex:[limit,on retry interval]
+Chapter <<CHAPretry>> describes Exim's mechanisms for controlling the intervals
+between delivery attempts for messages that cannot be delivered straight away.
+This option sets an overall limit to the length of time between retries.
+
+
+oindex:[%return_path_remove%]
+`..'=
+%return_path_remove%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:['Return-path:' header line,removing]
+RFC 2821, section 4.4, states that an SMTP server must insert a 'Return-path:'
+header line into a message when it makes a ``final delivery''. The 'Return-path:'
+header preserves the sender address as received in the MAIL command. This
+description implies that this header should not be present in an incoming
+message. If %return_path_remove% is true, any existing 'Return-path:'
+headers are removed from messages at the time they are received. Exim's
+transports have options for adding 'Return-path:' headers at the time of
+delivery. They are normally used only for final local deliveries.
+
+
+oindex:[%return_size_limit%]
+`..'=
+%return_size_limit%, Use: 'main', Type: 'integer', Default: '100K'
+===
+
+This option is an obsolete synonym for %bounce_return_size_limit%.
+
+
+oindex:[%rfc1413_hosts%]
+`..'=
+%rfc1413_hosts%, Use: 'main', Type: 'host list'!!, Default: '\*'
+===
+
+cindex:[RFC 1413]
+cindex:[host,for RFC 1413 calls]
+RFC 1413 identification calls are made to any client host which matches an item
+in the list.
+
+
+oindex:[%rfc1413_query_timeout%]
+`..'=
+%rfc1413_query_timeout%, Use: 'main', Type: 'time', Default: '30s'
+===
+
+cindex:[RFC 1413,query timeout]
+cindex:[timeout,for RFC 1413 call]
+This sets the timeout on RFC 1413 identification calls. If it is set to zero,
+no RFC 1413 calls are ever made.
+
+
+oindex:[%sender_unqualified_hosts%]
+`..'=
+%sender_unqualified_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[unqualified addresses]
+cindex:[host,unqualified addresses from]
+This option lists those hosts from which Exim is prepared to accept unqualified
+sender addresses. The addresses are made fully qualified by the addition of
+%qualify_domain%. This option also affects message header lines. Exim does not
+reject unqualified addresses in headers that contain sender addresses, but it
+qualifies them only if the message came from a host that matches
+%sender_unqualified_hosts%,
+or if the message was submitted locally (not using TCP/IP), and the %-bnq%
+option was not set.
+
+
+oindex:[%smtp_accept_keepalive%]
+`..'=
+%smtp_accept_keepalive%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[keepalive,on incoming connection]
+This option controls the setting of the SO_KEEPALIVE option on incoming
+TCP/IP socket connections. When set, it causes the kernel to probe idle
+connections periodically, by sending packets with ``old'' sequence numbers. The
+other end of the connection should send an acknowledgement if the connection is
+still okay or a reset if the connection has been aborted. The reason for doing
+this is that it has the beneficial effect of freeing up certain types of
+connection that can get stuck when the remote host is disconnected without
+tidying up the TCP/IP call properly. The keepalive mechanism takes several
+hours to detect unreachable hosts.
+
+
+
+oindex:[%smtp_accept_max%]
+`..'=
+%smtp_accept_max%, Use: 'main', Type: 'integer', Default: '20'
+===
+
+cindex:[limit,incoming SMTP connections]
+cindex:[SMTP,incoming connection count]
+cindex:[inetd]
+This option specifies the maximum number of simultaneous incoming SMTP calls
+that Exim will accept. It applies only to the listening daemon; there is no
+control (in Exim) when incoming SMTP is being handled by 'inetd'. If the value
+is set to zero, no limit is applied. However, it is required to be non-zero if
+either %smtp_accept_max_per_host% or %smtp_accept_queue% is set. See also
+%smtp_accept_reserve%.
+
+
+
+oindex:[%smtp_accept_max_nonmail%]
+`..'=
+%smtp_accept_max_nonmail%, Use: 'main', Type: 'integer', Default: '10'
+===
+
+cindex:[limit,non-mail SMTP commands]
+cindex:[SMTP,limiting non-mail commands]
+Exim counts the number of ``non-mail'' commands in an SMTP session, and drops the
+connection if there are too many. This option defines ``too many''. The check
+catches some denial-of-service attacks, repeated failing AUTHs, or a mad
+client looping sending EHLO, for example. The check is applied only if the
+client host matches %smtp_accept_max_nonmail_hosts%.
+
+When a new message is expected, one occurrence of RSET is not counted. This
+allows a client to send one RSET between messages (this is not necessary,
+but some clients do it). Exim also allows one uncounted occurence of HELO
+or EHLO, and one occurrence of STARTTLS between messages. After
+starting up a TLS session, another EHLO is expected, and so it too is not
+counted. The first occurrence of AUTH in a connection, or immediately
+following STARTTLS is not counted. Otherwise, all commands other than
+MAIL, RCPT, DATA, and QUIT are counted.
+
+
+oindex:[%smtp_accept_max_nonmail_hosts%]
+`..'=
+%smtp_accept_max_nonmail_hosts%, Use: 'main', Type: 'host list'!!, Default: '\*'
+===
+
+You can control which hosts are subject to the %smtp_accept_max_nonmail%
+check by setting this option. The default value makes it apply to all hosts. By
+changing the value, you can exclude any badly-behaved hosts that you have to
+live with.
+
+
+
+oindex:[%smtp_accept_max_per_connection%]
+`..'=
+%smtp_accept_max_per_connection%, Use: 'main', Type: 'integer', Default: '1000'
+===
+
+cindex:[SMTP incoming message count, limiting]
+cindex:[limit,messages per SMTP connection]
+The value of this option limits the number of MAIL commands that Exim is
+prepared to accept over a single SMTP connection, whether or not each command
+results in the transfer of a message. After the limit is reached, a 421
+response is given to subsequent MAIL commands. This limit is a safety
+precaution against a client that goes mad (incidents of this type have been
+seen).
+
+
+oindex:[%smtp_accept_max_per_host%]
+`..'=
+%smtp_accept_max_per_host%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[limit,SMTP connections from one host]
+cindex:[host,limiting SMTP connections from]
+This option restricts the number of simultaneous IP connections from a single
+host (strictly, from a single IP address) to the Exim daemon. The option is
+expanded, to enable different limits to be applied to different hosts by
+reference to $sender_host_address$. Once the limit is reached, additional
+connection attempts from the same host are rejected with error code 421. The
+default value of zero imposes no limit. If this option is set, it is required
+that %smtp_accept_max% be non-zero.
+
+*Warning*: When setting this option you should not use any expansion
+constructions that take an appreciable amount of time. The expansion and test
+happen in the main daemon loop, in order to reject additional connections
+without forking additional processes (otherwise a denial-of-service attack
+could cause a vast number or processes to be created). While the daemon is
+doing this processing, it cannot accept any other incoming connections.
+
+
+
+oindex:[%smtp_accept_queue%]
+`..'=
+%smtp_accept_queue%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[SMTP,incoming connection count]
+cindex:[queueing incoming messages]
+cindex:[message,queueing by SMTP connection count]
+If the number of simultaneous incoming SMTP calls handled via the listening
+daemon exceeds this value, messages received by SMTP are just placed on the
+queue; no delivery processes are started automatically. A value of zero implies
+no limit, and clearly any non-zero value is useful only if it is less than the
+%smtp_accept_max% value (unless that is zero). See also %queue_only%,
+%queue_only_load%, %queue_smtp_domains%, and the various %-od% command
+line options.
+
+
+oindex:[%smtp_accept_queue_per_connection%]
+`..'=
+%smtp_accept_queue_per_connection%, Use: 'main', Type: 'integer', Default: '10'
+===
+
+cindex:[queueing incoming messages]
+cindex:[message,queueing by message count]
+This option limits the number of delivery processes that Exim starts
+automatically when receiving messages via SMTP, whether via the daemon or by
+the use of %-bs% or %-bS%. If the value of the option is greater than zero,
+and the number of messages received in a single SMTP session exceeds this
+number, subsequent messages are placed on the queue, but no delivery processes
+are started. This helps to limit the number of Exim processes when a server
+restarts after downtime and there is a lot of mail waiting for it on other
+systems. On large systems, the default should probably be increased, and on
+dial-in client systems it should probably be set to zero (that is, disabled).
+
+
+oindex:[%smtp_accept_reserve%]
+`..'=
+%smtp_accept_reserve%, Use: 'main', Type: 'integer', Default: '0'
+===
+
+cindex:[SMTP,incoming call count]
+cindex:[host,reserved]
+When %smtp_accept_max% is set greater than zero, this option specifies a
+number of SMTP connections that are reserved for connections from the hosts
+that are specified in %smtp_reserve_hosts%. The value set in
+%smtp_accept_max% includes this reserve pool. The specified hosts are not
+restricted to this number of connections; the option specifies a minimum number
+of connection slots for them, not a maximum. It is a guarantee that that group
+of hosts can always get at least %smtp_accept_reserve% connections.
+
+For example, if %smtp_accept_max% is set to 50 and %smtp_accept_reserve% is
+set to 5, once there are 45 active connections (from any hosts), new
+connections are accepted only from hosts listed in %smtp_reserve_hosts%.
+See also %smtp_accept_max_per_host%.
+
+
+oindex:[%smtp_active_hostname%]
+`..'=
+%smtp_active_hostname%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[host,name in SMTP responses]
+cindex:[SMTP,host name in responses]
+This option is provided for multi-homed servers that want to masquerade as
+several different hosts. At the start of an SMTP connection, its value is
+expanded and used instead of the value of $primary_hostname$ in SMTP
+responses. For example, it is used as domain name in the response to an
+incoming HELO or EHLO command.
+
+It is also used in HELO commands for callout verification.
+The active hostname is placed in the $smtp_active_hostname$ variable, which
+is saved with any messages that are received. It is therefore available for use
+in routers and transports when the message is later delivered.
+
+
+If this option is unset, or if its expansion is forced to fail, or if the
+expansion results in an empty string, the value of $primary_hostname$ is
+used. Other expansion failures cause a message to be written to the main and
+panic logs, and the SMTP command receives a temporary error. Typically, the
+value of %smtp_active_hostname% depends on the incoming interface address.
+For example:
+
+....
+smtp_active_hostname = ${if eq{$interface_address}{10.0.0.1}\
+ {cox.mydomain}{box.mydomain}}
+....
+
+
+oindex:[%smtp_banner%]
+`..'=
+%smtp_banner%, Use: 'main', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[SMTP,welcome banner]
+cindex:[banner for SMTP]
+cindex:[welcome banner for SMTP]
+cindex:[customizing,SMTP banner]
+This string, which is expanded every time it is used, is output as the initial
+positive response to an SMTP connection. The default setting is:
+
+....
+smtp_banner = $smtp_active_hostname ESMTP Exim \
+ $version_number $tod_full
+....
+
+Failure to expand the string causes a panic error. If you want to create a
+multiline response to the initial SMTP connection, use ``\n'' in the string at
+appropriate points, but not at the end. Note that the 220 code is not included
+in this string. Exim adds it automatically (several times in the case of a
+multiline response).
+
+
+oindex:[%smtp_check_spool_space%]
+`..'=
+%smtp_check_spool_space%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[checking disk space]
+cindex:[disk space, checking]
+cindex:[spool directory,checking space]
+When this option is set, if an incoming SMTP session encounters the SIZE
+option on a MAIL command, it checks that there is enough space in the
+spool directory's partition to accept a message of that size, while still
+leaving free the amount specified by %check_spool_space% (even if that value
+is zero). If there isn't enough space, a temporary error code is returned.
+
+
+oindex:[%smtp_connect_backlog%]
+`..'=
+%smtp_connect_backlog%, Use: 'main', Type: 'integer', Default: '20'
+===
+
+cindex:[connection backlog]
+cindex:[SMTP,connection backlog]
+cindex:[backlog of connections]
+This option specifies a maximum number of waiting SMTP connections. Exim passes
+this value to the TCP/IP system when it sets up its listener. Once this number
+of connections are waiting for the daemon's attention, subsequent connection
+attempts are refused at the TCP/IP level. At least, that is what the manuals
+say; in some circumstances such connection attempts have been observed to time
+out instead. For large systems it is probably a good idea to increase the
+value (to 50, say). It also gives some protection against denial-of-service
+attacks by SYN flooding.
+
+
+oindex:[%smtp_enforce_sync%]
+`..'=
+%smtp_enforce_sync%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[SMTP,synchronization checking]
+cindex:[synchronization checking in SMTP]
+The SMTP protocol specification requires the client to wait for a response from
+the server at certain points in the dialogue. Without PIPELINING these
+synchronization points are after every command; with PIPELINING they are
+fewer, but they still exist.
+
+Some spamming sites send out a complete set of SMTP commands without waiting
+for any response. Exim protects against this by rejecting a message if the
+client has sent further input when it should not have. The error response ``554
+SMTP synchronization error'' is sent, and the connection is dropped. Testing for
+this error cannot be perfect because of transmission delays (unexpected input
+may be on its way but not yet received when Exim checks). However, it does
+detect many instances.
+
+The check can be globally disabled by setting %smtp_enforce_sync% false.
+If you want to disable the check selectively (for example, only for certain
+hosts), you can do so by an appropriate use of a %control% modifier in an ACL
+(see section <<SECTcontrols>>). See also %pipelining_advertise_hosts%.
+
+
+
+oindex:[%smtp_etrn_command%]
+`..'=
+%smtp_etrn_command%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[ETRN,command to be run]
+If this option is set, the given command is run whenever an SMTP ETRN
+command is received from a host that is permitted to issue such commands (see
+chapter <<CHAPACL>>). The string is split up into separate arguments which are
+independently expanded. The expansion variable $domain$ is set to the
+argument of the ETRN command, and no syntax checking is done on it. For
+example:
+
+ smtp_etrn_command = /etc/etrn_command $domain $sender_host_address
+
+A new process is created to run the command, but Exim does not wait for it to
+complete. Consequently, its status cannot be checked. If the command cannot be
+run, a line is written to the panic log, but the ETRN caller still receives
+a 250 success response. Exim is normally running under its own uid when
+receiving SMTP, so it is not possible for it to change the uid before running
+the command.
+
+
+oindex:[%smtp_etrn_serialize%]
+`..'=
+%smtp_etrn_serialize%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[ETRN,serializing]
+When this option is set, it prevents the simultaneous execution of more than
+one identical command as a result of ETRN in an SMTP connection. See
+section <<SECTETRN>> for details.
+
+
+oindex:[%smtp_load_reserve%]
+`..'=
+%smtp_load_reserve%, Use: 'main', Type: 'fixed-point', Default: 'unset'
+===
+
+cindex:[load average]
+If the system load average ever gets higher than this, incoming SMTP calls are
+accepted only from those hosts that match an entry in %smtp_reserve_hosts%.
+If %smtp_reserve_hosts% is not set, no incoming SMTP calls are accepted when
+the load is over the limit. The option has no effect on ancient operating
+systems on which Exim cannot determine the load average. See also
+%deliver_queue_load_max% and %queue_only_load%.
+
+
+
+oindex:[%smtp_max_synprot_errors%]
+`..'=
+%smtp_max_synprot_errors%, Use: 'main', Type: 'integer', Default: '3'
+===
+
+cindex:[SMTP,limiting syntax and protocol errors]
+cindex:[limit,SMTP syntax and protocol errors]
+Exim rejects SMTP commands that contain syntax or protocol errors. In
+particular, a syntactically invalid email address, as in this command:
+
+ RCPT TO:<abc xyz@a.b.c>
+
+causes immediate rejection of the command, before any other tests are done.
+(The ACL cannot be run if there is no valid address to set up for it.) An
+example of a protocol error is receiving RCPT before MAIL. If there are
+too many syntax or protocol errors in one SMTP session, the connection is
+dropped. The limit is set by this option.
+
+cindex:[PIPELINING,expected errors]
+When the PIPELINING extension to SMTP is in use, some protocol errors are
+``expected'', for instance, a RCPT command after a rejected MAIL command.
+Exim assumes that PIPELINING will be used if it advertises it (see
+%pipelining_advertise_hosts%), and in this situation, ``expected'' errors do
+not count towards the limit.
+
+
+
+oindex:[%smtp_max_unknown_commands%]
+`..'=
+%smtp_max_unknown_commands%, Use: 'main', Type: 'integer', Default: '3'
+===
+
+cindex:[SMTP,limiting unknown commands]
+cindex:[limit,unknown SMTP commands]
+If there are too many unrecognized commands in an incoming SMTP session, an
+Exim server drops the connection. This is a defence against some kinds of abuse
+that subvert web
+clients
+into making connections to SMTP ports; in these circumstances, a number of
+non-SMTP command lines are sent first.
+
+
+
+oindex:[%smtp_ratelimit_hosts%]
+`..'=
+%smtp_ratelimit_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[SMTP,rate limiting]
+cindex:[limit,rate of message arrival]
+cindex:[RCPT,rate limiting]
+Some sites find it helpful to be able to limit the rate at which certain hosts
+can send them messages, and the rate at which an individual message can specify
+recipients. When a host matches %smtp_ratelimit_hosts%, the values of
+%smtp_ratelimit_mail% and %smtp_ratelimit_rcpt% are used to control the
+rate of acceptance of MAIL and RCPT commands in a single SMTP session,
+respectively. Each option, if set, must contain a set of four comma-separated
+values:
+
+- A threshold, before which there is no rate limiting.
+
+- An initial time delay. Unlike other times in Exim, numbers with decimal
+fractional parts are allowed here.
+
+- A factor by which to increase the delay each time.
+
+- A maximum value for the delay. This should normally be less than 5 minutes,
+because after that time, the client is liable to timeout the SMTP command.
+
+For example, these settings have been used successfully at the site which
+first suggested this feature, for controlling mail from their customers:
+
+ smtp_ratelimit_mail = 2,0.5s,1.05,4m
+ smtp_ratelimit_rcpt = 4,0.25s,1.015,4m
+
+The first setting specifies delays that are applied to MAIL commands after
+two have been received over a single connection. The initial delay is 0.5
+seconds, increasing by a factor of 1.05 each time. The second setting applies
+delays to RCPT commands when more than four occur in a single message.
+
+It is also possible to configure delays explicitly in ACLs. See section
+<<SECTACLmodi>> for details.
+
+
+
+oindex:[%smtp_ratelimit_mail%]
+`..'=
+%smtp_ratelimit_mail%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+See %smtp_ratelimit_hosts% above.
+
+
+oindex:[%smtp_ratelimit_rcpt%]
+`..'=
+%smtp_ratelimit_rcpt%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+See %smtp_ratelimit_hosts% above.
+
+
+oindex:[%smtp_receive_timeout%]
+`..'=
+%smtp_receive_timeout%, Use: 'main', Type: 'time', Default: '5m'
+===
+
+cindex:[timeout,for SMTP input]
+cindex:[SMTP timeout, input]
+This sets a timeout value for SMTP reception. It applies to all forms of SMTP
+input, including batch SMTP. If a line of input (either an SMTP command or a
+data line) is not received within this time, the SMTP connection is dropped and
+the message is abandoned.
+A line is written to the log containing one of the following messages:
+
+ SMTP command timeout on connection from...
+ SMTP data timeout on connection from...
+
+The former means that Exim was expecting to read an SMTP command; the latter
+means that it was in the DATA phase, reading the contents of a message.
+
+
+cindex:[%-os% option]
+The value set by this option can be overridden by the
+%-os% command-line option. A setting of zero time disables the timeout, but
+this should never be used for SMTP over TCP/IP. (It can be useful in some cases
+of local input using %-bs% or %-bS%.) For non-SMTP input, the reception
+timeout is controlled by %receive_timeout% and %-or%.
+
+
+oindex:[%smtp_reserve_hosts%]
+`..'=
+%smtp_reserve_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+This option defines hosts for which SMTP connections are reserved; see
+%smtp_accept_reserve% and %smtp_load_reserve% above.
+
+
+oindex:[%smtp_return_error_details%]
+`..'=
+%smtp_return_error_details%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[SMTP,details policy failures]
+cindex:[policy control rejection, returning details]
+In the default state, Exim uses bland messages such as
+``Administrative prohibition'' when it rejects SMTP commands for policy
+reasons. Many sysadmins like this because it gives away little information
+to spammers. However, some other syadmins who are applying strict checking
+policies want to give out much fuller information about failures. Setting
+%smtp_return_error_details% true causes Exim to be more forthcoming. For
+example, instead of ``Administrative prohibition'', it might give:
+
+ 550-Rejected after DATA: '>' missing at end of address:
+ 550 failing address in "From" header is: <user@dom.ain
+
+
+
+oindex:[%spamd_address%]
+`..'=
+%spamd_address%, Use: 'main', Type: 'string', Default: `127.0.0.1 783`
+===
+
+This option is available when Exim is compiled with the content-scanning
+extension. It specifies how Exim connects to SpamAssassin's %spamd% daemon. See
+section <<SECTscanspamass>> for more details.
+
+
+
+oindex:[%split_spool_directory%]
+`..'=
+%split_spool_directory%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[multiple spool directories]
+cindex:[spool directory,split]
+cindex:[directories, multiple]
+If this option is set, it causes Exim to split its input directory into 62
+subdirectories, each with a single alphanumeric character as its name. The
+sixth character of the message id is used to allocate messages to
+subdirectories; this is the least significant base-62 digit of the time of
+arrival of the message.
+
+Splitting up the spool in this way may provide better performance on systems
+where there are long mail queues, by reducing the number of files in any one
+directory. The msglog directory is also split up in a similar way to the input
+directory; however, if %preserve_message_logs% is set, all old msglog files
+are still placed in the single directory _msglog.OLD_.
+
+It is not necessary to take any special action for existing messages when
+changing %split_spool_directory%. Exim notices messages that are in the
+``wrong'' place, and continues to process them. If the option is turned off after
+a period of being on, the subdirectories will eventually empty and be
+automatically deleted.
+
+When %split_spool_directory% is set, the behaviour of queue runner processes
+changes. Instead of creating a list of all messages in the queue, and then
+trying to deliver each one in turn, it constructs a list of those in one
+sub-directory and tries to deliver them, before moving on to the next
+sub-directory. The sub-directories are processed in a random order. This
+spreads out the scanning of the input directories, and uses less memory. It is
+particularly beneficial when there are lots of messages on the queue. However,
+if %queue_run_in_order% is set, none of this new processing happens. The
+entire queue has to be scanned and sorted before any deliveries can start.
+
+
+oindex:[%spool_directory%]
+`..'=
+%spool_directory%, Use: 'main', Type: 'string'!!, Default: 'set at compile time'
+===
+
+cindex:[spool directory,path to]
+This defines the directory in which Exim keeps its spool, that is, the messages
+it is waiting to deliver. The default value is taken from the compile-time
+configuration setting, if there is one. If not, this option must be set. The
+string is expanded, so it can contain, for example, a reference to
+$primary_hostname$.
+
+If the spool directory name is fixed on your installation, it is recommended
+that you set it at build time rather than from this option, particularly if the
+log files are being written to the spool directory (see %log_file_path%).
+Otherwise log files cannot be used for errors that are detected early on, such
+as failures in the configuration file.
+
+By using this option to override the compiled-in path, it is possible to run
+tests of Exim without using the standard spool.
+
+
+oindex:[%strip_excess_angle_brackets%]
+`..'=
+%strip_excess_angle_brackets%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[angle brackets, excess]
+If this option is set, redundant pairs of angle brackets round ``route-addr''
+items in addresses are stripped. For example, `\<\<xxx@a.b.c.d\>\>` is treated
+as `<xxx@a.b.c.d>`. If this is in the envelope and the message is passed on
+to another MTA, the excess angle brackets are not passed on. If this option is
+not set, multiple pairs of angle brackets cause a syntax error.
+
+
+oindex:[%strip_trailing_dot%]
+`..'=
+%strip_trailing_dot%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[trailing dot on domain]
+cindex:[dot,trailing on domain]
+If this option is set, a trailing dot at the end of a domain in an address is
+ignored. If this is in the envelope and the message is passed on to another
+MTA, the dot is not passed on. If this option is not set, a dot at the end of a
+domain causes a syntax error.
+However, addresses in header lines are checked only when an ACL requests header
+syntax checking.
+
+
+oindex:[%syslog_duplication%]
+`..'=
+%syslog_duplication%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[syslog,duplicate log lines; suppressing]
+When Exim is logging to syslog, it writes the log lines for its three
+separate logs at different syslog priorities so that they can in principle
+be separated on the logging hosts. Some installations do not require this
+separation, and in those cases, the duplication of certain log lines is a
+nuisance. If %syslog_duplication% is set false, only one copy of any
+particular log line is written to syslog. For lines that normally go to
+both the main log and the reject log, the reject log version (possibly
+containing message header lines) is written, at LOG_NOTICE priority.
+Lines that normally go to both the main and the panic log are written at
+the LOG_ALERT priority.
+
+
+oindex:[%syslog_facility%]
+`..'=
+%syslog_facility%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[syslog,facility; setting]
+This option sets the syslog ``facility'' name, used when Exim is logging to
+syslog. The value must be one of the strings ``mail'', ``user'', ``news'', ``uucp'',
+``daemon'', or ``local'x'##'' where 'x' is a digit between 0 and 7. If this
+option is unset, ``mail'' is used. See chapter <<CHAPlog>> for details of Exim's
+logging.
+
+
+
+oindex:[%syslog_processname%]
+`..'=
+%syslog_processname%, Use: 'main', Type: 'string', Default: `exim`
+===
+
+cindex:[syslog,process name; setting]
+This option sets the syslog ``ident'' name, used when Exim is logging to syslog.
+The value must be no longer than 32 characters. See chapter <<CHAPlog>> for
+details of Exim's logging.
+
+
+
+oindex:[%syslog_timestamp%]
+`..'=
+%syslog_timestamp%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[syslog,timestamps]
+If %syslog_timestamp% is set false, the timestamps on Exim's log lines are
+omitted when these lines are sent to syslog. See chapter <<CHAPlog>> for
+details of Exim's logging.
+
+
+oindex:[%system_filter%]
+`..'=
+%system_filter%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[filter,system filter]
+cindex:[system filter,specifying]
+cindex:[Sieve filter,not available for system filter]
+This option specifies an Exim filter file that is applied to all messages at
+the start of each delivery attempt, before any routing is done. System filters
+must be Exim filters; they cannot be Sieve filters. If the system filter
+generates any deliveries to files or pipes, or any new mail messages, the
+appropriate %system_filter_..._transport% option(s) must be set, to define
+which transports are to be used. Details of this facility are given in chapter
+<<CHAPsystemfilter>>.
+
+
+oindex:[%system_filter_directory_transport%]
+`..'=
+%system_filter_directory_transport%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+This sets the name of the transport driver that is to be used when the
+%save% command in a system message filter specifies a path ending in ``/'',
+implying delivery of each message into a separate file in some directory.
+During the delivery, the variable $address_file$ contains the path name.
+
+
+oindex:[%system_filter_file_transport%]
+`..'=
+%system_filter_file_transport%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[file,transport for system filter]
+This sets the name of the transport driver that is to be used when the %save%
+command in a system message filter specifies a path not ending in ``/''. During
+the delivery, the variable $address_file$ contains the path name.
+
+oindex:[%system_filter_group%]
+`..'=
+%system_filter_group%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[gid (group id),system filter]
+This option is used only when %system_filter_user% is also set. It sets the
+gid under which the system filter is run, overriding any gid that is associated
+with the user. The value may be numerical or symbolic.
+
+oindex:[%system_filter_pipe_transport%]
+`..'=
+%system_filter_pipe_transport%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[^pipe^ transport,for system filter]
+This specifies the transport driver that is to be used when a %pipe% command is
+used in a system filter. During the delivery, the variable $address_pipe$
+contains the pipe command.
+
+
+oindex:[%system_filter_reply_transport%]
+`..'=
+%system_filter_reply_transport%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[^autoreply^ transport,for system filter]
+This specifies the transport driver that is to be used when a %mail% command is
+used in a system filter.
+
+oindex:[%system_filter_user%]
+`..'=
+%system_filter_user%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[uid (user id),system filter]
+If this option is not set, the system filter is run in the main Exim delivery
+process, as root. When the option is set, the system filter runs in a separate
+process, as the given user. Unless the string consists entirely of digits, it
+is looked up in the password data. Failure to find the named user causes a
+configuration error. The gid is either taken from the password data, or
+specified by %system_filter_group%. When the uid is specified numerically,
+%system_filter_group% is required to be set.
+
+If the system filter generates any pipe, file, or reply deliveries, the uid
+under which the filter is run is used when transporting them, unless a
+transport option overrides. Normally you should set %system_filter_user% if
+your system filter generates these kinds of delivery.
+
+
+oindex:[%tcp_nodelay%]
+`..'=
+%tcp_nodelay%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[daemon,TCP_NODELAY on sockets]
+cindex:[Nagle algorithm]
+cindex:[TCP_NODELAY on listening sockets]
+If this option is set false, it stops the Exim daemon setting the
+TCP_NODELAY option on its listening sockets. Setting TCP_NODELAY
+turns off the ``Nagle algorithm'', which is a way of improving network
+performance in interactive (character-by-character) situations. Turning it off
+should improve Exim's performance a bit, so that is what happens by default.
+However, it appears that some broken clients cannot cope, and time out. Hence
+this option. It affects only those sockets that are set up for listening by the
+daemon. Sockets created by the smtp transport for delivering mail always set
+TCP_NODELAY.
+
+
+oindex:[%timeout_frozen_after%]
+`..'=
+%timeout_frozen_after%, Use: 'main', Type: 'time', Default: '0s'
+===
+
+cindex:[frozen messages,timing out]
+cindex:[timeout,frozen messages]
+If %timeout_frozen_after% is set to a time greater than zero, a frozen
+message of any kind that has been on the queue for longer than the given
+time is automatically cancelled at the next queue run. If it is a bounce
+message, it is just discarded; otherwise, a bounce is sent to the sender, in a
+similar manner to cancellation by the %-Mg% command line option. If you want
+to timeout frozen bounce messages earlier than other kinds of frozen message,
+see %ignore_bounce_errors_after%.
+
+
+oindex:[%timezone%]
+`..'=
+%timezone%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[timezone, setting]
+The value of %timezone% is used to set the environment variable TZ while
+running Exim (if it is different on entry). This ensures that all timestamps
+created by Exim are in the required timezone. If you want all your timestamps
+to be in UTC (aka GMT) you should set
+
+ timezone = UTC
+
+The default value is taken from TIMEZONE_DEFAULT in _Local/Makefile_,
+or, if that is not set, from the value of the TZ environment variable when Exim
+is built. If %timezone% is set to the empty string, either at build or run
+time, any existing TZ variable is removed from the environment when Exim
+runs. This is appropriate behaviour for obtaining wall-clock time on some, but
+unfortunately not all, operating systems.
+
+
+oindex:[%tls_advertise_hosts%]
+`..'=
+%tls_advertise_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[TLS,advertising]
+cindex:[encryption,on SMTP connection]
+cindex:[SMTP,encrypted connection]
+When Exim is built with support for TLS encrypted connections, the availability
+of the STARTTLS command to set up an encrypted session is advertised in
+response to EHLO only to those client hosts that match this option. See
+chapter <<CHAPTLS>> for details of Exim's support for TLS.
+
+
+oindex:[%tls_certificate%]
+`..'=
+%tls_certificate%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,server certificate; location of]
+cindex:[certificate for server, location of]
+The value of this option is expanded, and must then be the absolute path to a
+file which contains the server's certificates. The server's private key is also
+assumed to be in this file if %tls_privatekey% is unset. See chapter <<CHAPTLS>>
+for further details.
+
+*Note*: The certificates defined by this option are used only when Exim is
+receiving incoming messages as a server. If you want to supply certificates for
+use when sending messages as a client, you must set the %tls_certificate%
+option in the relevant ^smtp^ transport.
+
+
+oindex:[%tls_crl%]
+`..'=
+%tls_crl%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,server certificate revocation list]
+cindex:[certificate,revocation list for server]
+This option specifies a certificate revocation list. The expanded value must
+be the name of a file that contains a CRL in PEM format.
+
+
+oindex:[%tls_dhparam%]
+`..'=
+%tls_dhparam%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,D-H parameters for server]
+The value of this option is expanded, and must then be the absolute path to
+a file which contains the server's DH parameter values.
+This is used only for OpenSSL. When Exim is linked with GnuTLS, this option is
+ignored. See section <<SECTopenvsgnu>> for further details.
+
+
+oindex:[%tls_on_connect_ports%]
+`..'=
+%tls_on_connect_ports%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+This option specifies a list of incoming SSMTP (aka SMTPS) ports that should
+operate the obsolete SSMTP (SMTPS) protocol, where a TLS session is immediately
+set up without waiting for the client to issue a STARTTLS command. For
+further details, see section <<SECTsupobssmt>>.
+
+
+
+oindex:[%tls_privatekey%]
+`..'=
+%tls_privatekey%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,server private key; location of]
+The value of this option is expanded, and must then be the absolute path to a
+file which contains the server's private key. If this option is unset, the
+private key is assumed to be in the same file as the server's certificates. See
+chapter <<CHAPTLS>> for further details.
+
+
+oindex:[%tls_remember_esmtp%]
+`..'=
+%tls_remember_esmtp%, Use: 'main', Type: 'boolean', Default: 'false'
+===
+
+cindex:[TLS,esmtp state; remembering]
+cindex:[TLS,broken clients]
+If this option is set true, Exim violates the RFCs by remembering that it is in
+``esmtp'' state after successfully negotiating a TLS session. This provides
+support for broken clients that fail to send a new EHLO after starting a
+TLS session.
+
+
+oindex:[%tls_require_ciphers%]
+`..'=
+%tls_require_ciphers%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,requiring specific ciphers]
+cindex:[cipher,requiring specific]
+This option controls which ciphers can be used for incoming TLS connections.
+The ^smtp^ transport has an option of the same name for controlling outgoing
+connections. This option is expanded for each connection, so can be varied for
+different clients if required. The value of this option must be a list of
+permitted cipher suites. The OpenSSL and GnuTLS libraries handle cipher control
+in somewhat different ways.
+
+If GnuTLS is being used, the client controls the preference order of the
+available ciphers.
+
+Details are given in sections <<SECTreqciphssl>> and <<SECTreqciphgnu>>.
+
+
+oindex:[%tls_try_verify_hosts%]
+`..'=
+%tls_try_verify_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[TLS,client certificate verification]
+cindex:[certificate,verification of client]
+See %tls_verify_hosts% below.
+
+
+oindex:[%tls_verify_certificates%]
+`..'=
+%tls_verify_certificates%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,client certificate verification]
+cindex:[certificate,verification of client]
+The value of this option is expanded, and must then be the absolute path to
+a file containing permitted certificates for clients that
+match %tls_verify_hosts% or %tls_try_verify_hosts%. Alternatively, if you
+are using OpenSSL, you can set %tls_verify_certificates% to the name of a
+directory containing certificate files. This does not work with GnuTLS; the
+option must be set to the name of a single file if you are using GnuTLS.
+
+
+oindex:[%tls_verify_hosts%]
+`..'=
+%tls_verify_hosts%, Use: 'main', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[TLS,client certificate verification]
+cindex:[certificate,verification of client]
+This option, along with %tls_try_verify_hosts%, controls the checking of
+certificates from clients.
+The expected certificates are defined by %tls_verify_certificates%, which
+must be set. A configuration error occurs if either %tls_verify_hosts% or
+%tls_try_verify_hosts% is set and %tls_verify_certificates% is not set.
+
+Any client that matches %tls_verify_hosts% is constrained by
+%tls_verify_certificates%. The client must present one of the listed
+certificates. If it does not, the connection is aborted.
+
+A weaker form of checking is provided by %tls_try_verify_hosts%. If a client
+matches this option (but not %tls_verify_hosts%), Exim requests a
+certificate and checks it against %tls_verify_certificates%, but does not
+abort the connection if there is no certificate or if it does not match. This
+state can be detected in an ACL, which makes it possible to implement policies
+such as ``accept for relay only if a verified certificate has been received, but
+accept for local delivery if encrypted, even without a verified certificate''.
+
+Client hosts that match neither of these lists are not asked to present
+certificates.
+
+
+oindex:[%trusted_groups%]
+`..'=
+%trusted_groups%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[trusted group]
+cindex:[group,trusted]
+If this option is set, any process that is running in one of the listed groups,
+or which has one of them as a supplementary group, is trusted.
+The groups can be specified numerically or by name.
+See section <<SECTtrustedadmin>> for details of what trusted callers are
+permitted to do. If neither %trusted_groups% nor %trusted_users% is set, only
+root and the Exim user are trusted.
+
+
+oindex:[%trusted_users%]
+`..'=
+%trusted_users%, Use: 'main', Type: 'string list', Default: 'unset'
+===
+
+cindex:[trusted user]
+cindex:[user,trusted]
+If this option is set, any process that is running as one of the listed users
+is trusted.
+The users can be specified numerically or by name.
+See section <<SECTtrustedadmin>> for details of what trusted callers are
+permitted to do. If neither %trusted_groups% nor %trusted_users% is set, only
+root and the Exim user are trusted.
+
+oindex:[%unknown_login%]
+`..'=
+%unknown_login%, Use: 'main', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[uid (user id),unknown caller]
+This is a specialized feature for use in unusual configurations. By default, if
+the uid of the caller of Exim cannot be looked up using 'getpwuid()', Exim
+gives up. The %unknown_login% option can be used to set a login name to be
+used in this circumstance. It is expanded, so values like %user\$caller_uid%
+can be set. When %unknown_login% is used, the value of %unknown_username% is
+used for the user's real name (gecos field), unless this has been set by the
+%-F% option.
+
+
+oindex:[%unknown_username%]
+`..'=
+%unknown_username%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+See %unknown_login%.
+
+
+oindex:[%untrusted_set_sender%]
+`..'=
+%untrusted_set_sender%, Use: 'main', Type: 'address list'!!, Default: 'unset'
+===
+
+cindex:[trusted user]
+cindex:[sender,setting by untrusted user]
+cindex:[untrusted user, setting sender]
+cindex:[user,untrusted setting sender]
+cindex:[envelope sender]
+When an untrusted user submits a message to Exim using the standard input, Exim
+normally creates an envelope sender address from the user's login and the
+default qualification domain. Data from the %-f% option (for setting envelope
+senders on non-SMTP messages) or the SMTP MAIL command (if %-bs% or %-bS%
+is used) is ignored.
+
+However, untrusted users are permitted to set an empty envelope sender address,
+to declare that a message should never generate any bounces. For example:
+
+ exim -f '<>' user@domain.example
+
+The %untrusted_set_sender% option allows you to permit untrusted users to set
+other envelope sender addresses in a controlled way. When it is set, untrusted
+users are allowed to set envelope sender addresses that match any of the
+patterns in the list. Like all address lists, the string is expanded. The
+identity of the user is in $sender_ident$, so you can, for example, restrict
+users to setting senders that start with their login ids
+followed by a hyphen
+by a setting like this:
+
+ untrusted_set_sender = ^$sender_ident-
+
+If you want to allow untrusted users to set envelope sender addresses without
+restriction, you can use
+
+ untrusted_set_sender = *
+
+The %untrusted_set_sender% option applies to all forms of local input, but
+only to the setting of the envelope sender. It does not permit untrusted users
+to use the other options which trusted user can use to override message
+parameters. Furthermore, it does not stop Exim from removing an existing
+'Sender:' header in the message, or from adding a 'Sender:' header if
+necessary. See %local_sender_retain% and %local_from_check% for ways of
+overriding these actions. The handling of the 'Sender:' header is also
+described in section <<SECTthesenhea>>.
+
+The log line for a message's arrival shows the envelope sender following ``<=''.
+For local messages, the user's login always follows, after ``U=''. In %-bp%
+displays, and in the Exim monitor, if an untrusted user sets an envelope sender
+address, the user's login is shown in parentheses after the sender address.
+
+
+oindex:[%uucp_from_pattern%]
+`..'=
+%uucp_from_pattern%, Use: 'main', Type: 'string', Default: 'see below'
+===
+
+cindex:[``From'' line]
+cindex:[UUCP,``From'' line]
+Some applications that pass messages to an MTA via a command line interface use
+an initial line starting with ``From'' to pass the envelope sender. In
+particular, this is used by UUCP software. Exim recognizes such a line by means
+of a regular expression that is set in %uucp_from_pattern%. When the pattern
+matches, the sender address is constructed by expanding the contents of
+%uucp_from_sender%, provided that the caller of Exim is a trusted user. The
+default pattern recognizes lines in the following two forms:
+
+ From ph10 Fri Jan 5 12:35 GMT 1996
+ From ph10 Fri, 7 Jan 97 14:00:00 GMT
+
+The pattern can be seen by running
+
+ exim -bP uucp_from_pattern
+
+It checks only up to the hours and minutes, and allows for a 2-digit or 4-digit
+year in the second case. The first word after ``From'' is matched in the regular
+expression by a parenthesized subpattern. The default value for
+%uucp_from_sender% is ``$1'', which therefore just uses this first word (``ph10''
+in the example above) as the message's sender. See also
+%ignore_fromline_hosts%.
+
+
+oindex:[%uucp_from_sender%]
+`..'=
+%uucp_from_sender%, Use: 'main', Type: 'string'!!, Default: `\$1`
+===
+
+See %uucp_from_pattern% above.
+
+
+oindex:[%warn_message_file%]
+`..'=
+%warn_message_file%, Use: 'main', Type: 'string', Default: 'unset'
+===
+
+cindex:[warning of delay,customizing the message]
+cindex:[customizing,warning message]
+This option defines a template file containing paragraphs of text to be used
+for constructing the warning message which is sent by Exim when a message has
+been on the queue for a specified amount of time, as specified by
+%delay_warning%. Details of the file's contents are given in chapter
+<<CHAPemsgcust>>. See also %bounce_message_file%.
+
+
+oindex:[%write_rejectlog%]
+`..'=
+%write_rejectlog%, Use: 'main', Type: 'boolean', Default: 'true'
+===
+
+cindex:[reject log,disabling]
+If this option is set false, Exim no longer writes anything to the reject log.
+See chapter <<CHAPlog>> for details of what Exim writes to its logs.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAProutergeneric]]
+Generic options for routers
+---------------------------
+cindex:[options,generic; for routers]
+cindex:[generic options,router]
+This chapter describes the generic options that apply to all routers.
+Those that are preconditions are marked with !? in the ``use'' field.
+
+For a general description of how a router operates, see sections
+<<SECTrunindrou>> and <<SECTrouprecon>>. The latter specifies the order in
+which the preconditions are tested. The order of expansion of the options that
+provide data for a transport is: %errors_to%, %headers_add%, %headers_remove%,
+%transport%.
+
+
+
+oindex:[%address_data%]
+`..'=
+%address_data%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[router,data attached to address]
+The string is expanded just before the router is run, that is, after all the
+precondition tests have succeeded. If the expansion is forced to fail, the
+router declines. Other expansion failures cause delivery of the address to be
+deferred.
+
+When the expansion succeeds, the value is retained with the address, and can be
+accessed using the variable $address_data$ in the current router, subsequent
+routers, and the eventual transport.
+
+*Warning*: if the current or any subsequent router is a ^redirect^ router
+that runs a user's filter file, the contents of $address_data$ are
+accessible in the filter. This is not normally a problem, because such data is
+usually either not confidential or it ``belongs'' to the current user, but if you
+do put confidential data into $address_data$ you need to remember this
+point.
+
+Even if the router declines or passes, the value of $address_data$ remains
+with the address, though it can be changed by another %address_data% setting
+on a subsequent router. If a router generates child addresses, the value of
+$address_data$ propagates to them. This also applies to the special kind of
+``child'' that is generated by a router with the %unseen% option.
+
+The idea of %address_data% is that you can use it to look up a lot of data for
+the address once, and then pick out parts of the data later. For example, you
+could use a single LDAP lookup to return a string of the form
+
+ uid=1234 gid=5678 mailbox=/mail/xyz forward=/home/xyz/.forward
+
+In the transport you could pick out the mailbox by a setting such as
+
+ file = ${extract{mailbox}{$address_data}}
+
+This makes the configuration file less messy, and also reduces the number of
+lookups (though Exim does cache lookups).
+
+The %address_data% facility is also useful as a means of passing information
+from one router to another, and from a router to a transport. In addition, if
+
+$address_data$ is set by a router when verifying a recipient address from an
+ACL, it remains available for use in the rest of the ACL statement. After
+verifying a sender, the value is transferred to $sender_address_data$.
+
+
+
+
+oindex:[%address_test%]
+`..'=
+%address_test%, Use: 'routers'!?, Type: 'boolean', Default: 'true'
+===
+
+cindex:[%-bt% option]
+cindex:[router,skipping when address testing]
+If this option is set false, the router is skipped when routing is being tested
+by means of the %-bt% command line option. This can be a convenience when your
+first router sends messages to an external scanner, because it saves you
+having to set the ``already scanned'' indicator when testing real address
+routing.
+
+
+
+oindex:[%cannot_route_message%]
+`..'=
+%cannot_route_message%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[router,customizing ``cannot route'' message]
+cindex:[customizing,``cannot route'' message]
+This option specifies a text message that is used when an address cannot be
+routed because Exim has run out of routers. The default message is ``Unrouteable
+address''. This option is useful only on routers that have %more% set false, or
+on the very last router in a configuration, because the value that is used is
+taken from the last router that inspects an address. For example, using the
+default configuration, you could put:
+
+ cannot_route_message = Remote domain not found in DNS
+
+on the first (^dnslookup^) router, and
+
+ cannot_route_message = Unknown local user
+
+on the final router that checks for local users. If string expansion fails, the
+default message is used.
+Unless the expansion failure was explicitly forced, a message about the failure
+is written to the main and panic logs, in addition to the normal message about
+the routing failure.
+
+
+oindex:[%caseful_local_part%]
+`..'=
+%caseful_local_part%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+cindex:[case of local parts]
+cindex:[router,case of local parts]
+By default, routers handle the local parts of addresses in a case-insensitive
+manner, though the actual case is preserved for transmission with the message.
+If you want the case of letters to be significant in a router, you must set
+this option true. For individual router options that contain address or local
+part lists (for example, %local_parts%), case-sensitive matching can be turned
+on by ``+caseful'' as a list item. See section <<SECTcasletadd>> for more details.
+
+The value of the $local_part$ variable is forced to lower case while a
+router is running unless %caseful_local_part% is set. When a router assigns
+an address to a transport, the value of $local_part$ when the transport runs
+is the same as it was in the router. Similarly, when a router generates child
+addresses by aliasing or forwarding, the values of $original_local_part$
+and $parent_local_part$ are those that were used by the redirecting router.
+
+This option applies to the processing of an address by a router. When a
+recipient address is being processed in an ACL, there is a separate %control%
+modifier that can be used to specify case-sensitive processing within the ACL
+(see section <<SECTcontrols>>).
+
+
+
+oindex:[%check_local_user%]
+`..'=
+%check_local_user%, Use: 'routers'!?, Type: 'boolean', Default: 'false'
+===
+
+cindex:[local user, checking in router]
+cindex:[router,checking for local user]
+cindex:[_/etc/passwd_]
+When this option is true, Exim checks that the local part of the recipient
+address (with affixes removed if relevant) is the name of an account on the
+local system. The check is done by calling the 'getpwnam()' function rather
+than trying to read _/etc/passwd_ directly. This means that other methods of
+holding password data (such as NIS) are supported. If the local part is a local
+user, $home$ is set from the password data, and can be tested in other
+preconditions that are evaluated after this one (the order of evaluation is
+given in section <<SECTrouprecon>>). However, the value of $home$ can be
+overridden by %router_home_directory%. If the local part is not a local user,
+the router is skipped.
+
+If you want to check that the local part is either the name of a local user
+or matches something else, you cannot combine %check_local_user% with a
+setting of %local_parts%, because that specifies the logical 'and' of the
+two conditions. However, you can use a ^passwd^ lookup in a %local_parts%
+setting to achieve this. For example:
+
+ local_parts = passwd;$local_part : lsearch;/etc/other/users
+
+Note, however, that the side effects of %check_local_user% (such as setting
+up a home directory) do not occur when a ^passwd^ lookup is used in a
+%local_parts% (or any other) precondition.
+
+
+
+oindex:[%condition%]
+`..'=
+%condition%, Use: 'routers'!?, Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[router,customized precondition]
+This option specifies a general precondition test that has to succeed for the
+router to be called. The %condition% option is the last precondition to be
+evaluated (see section <<SECTrouprecon>>). The string is expanded, and if the
+result is a forced failure, or an empty string, or one of the strings ``0'' or
+``no'' or ``false'' (checked without regard to the case of the letters), the router
+is skipped, and the address is offered to the next one.
+
+If the result is any other value, the router is run (as this is the last
+precondition to be evaluated, all the other preconditions must be true).
+
+The %condition% option provides a means of applying custom conditions to the
+running of routers. Note that in the case of a simple conditional expansion,
+the default expansion values are exactly what is wanted. For example:
+
+ condition = ${if >{$message_age}{600}}
+
+Because of the default behaviour of the string expansion, this is equivalent to
+
+ condition = ${if >{$message_age}{600}{true}{}}
+
+
+If the expansion fails (other than forced failure) delivery is deferred. Some
+of the other precondition options are common special cases that could in fact
+be specified using %condition%.
+
+
+
+oindex:[%debug_print%]
+`..'=
+%debug_print%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[testing,variables in drivers]
+If this option is set and debugging is enabled (see the %-d% command line
+option), the string is expanded and included in the debugging output.
+If expansion of the string fails, the error message is written to the debugging
+output, and Exim carries on processing.
+This option is provided to help with checking out the values of variables and
+so on when debugging router configurations. For example, if a %condition%
+option appears not to be working, %debug_print% can be used to output the
+variables it references. The output happens after checks for %domains%,
+%local_parts%, and %check_local_user% but before any other preconditions are
+tested. A newline is added to the text if it does not end with one.
+
+
+
+oindex:[%disable_logging%]
+`..'=
+%disable_logging%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+If this option is set true, nothing is logged for any routing errors
+or for any deliveries caused by this router. You should not set this option
+unless you really, really know what you are doing. See also the generic
+transport option of the same name.
+
+
+oindex:[%domains%]
+`..'=
+%domains%, Use: 'routers'!?, Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[router,restricting to specific domains]
+If this option is set, the router is skipped unless the current domain matches
+the list. If the match is achieved by means of a file lookup, the data that the
+lookup returned for the domain is placed in $domain_data$ for use in string
+expansions of the driver's private options.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.
+
+
+
+oindex:[%driver%]
+`..'=
+%driver%, Use: 'routers', Type: 'string', Default: 'unset'
+===
+
+This option must always be set. It specifies which of the available routers is
+to be used.
+
+
+
+oindex:[%errors_to%]
+`..'=
+%errors_to%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[envelope sender]
+cindex:[router,changing address for errors]
+If a router successfully handles an address, it may queue the address for
+delivery or it may generate child addresses. In both cases, if there is a
+delivery problem during later processing, the resulting bounce message is sent
+to the address that results from expanding this string, provided that the
+address verifies successfully.
+%errors_to% is expanded before %headers_add%, %headers_remove%, and
+%transport%.
+
+If the option is unset, or the expansion is forced to fail, or the result of
+the expansion fails to verify, the errors address associated with the incoming
+address is used. At top level, this is the envelope sender. A non-forced
+expansion failure causes delivery to be deferred.
+
+If an address for which %errors_to% has been set ends up being delivered over
+SMTP, the envelope sender for that delivery is the %errors_to% value, so that
+any bounces that are generated by other MTAs on the delivery route are also
+sent there. The most common use of %errors_to% is probably to direct mailing
+list bounces to the manager of the list, as described in section
+<<SECTmailinglists>>.
+
+The %errors_to% setting associated with an address can be overridden if it
+subsequently passes through other routers that have their own %errors_to%
+settings,
+or if it is delivered by a transport with a %return_path% setting.
+
+You can set %errors_to% to the empty string by either of these settings:
+
+ errors_to =
+ errors_to = ""
+
+An expansion item that yields an empty string has the same effect. If you do
+this, a locally detected delivery error for addresses processed by this router
+no longer gives rise to a bounce message; the error is discarded. If the
+address is delivered to a remote host, the return path is set to `<>`, unless
+overridden by the %return_path% option on the transport.
+
+If for some reason you want to discard local errors, but use a non-empty
+MAIL command for remote delivery, you can preserve the original return
+path in $address_data$ in the router, and reinstate it in the transport by
+setting %return_path%.
+
+
+
+oindex:[%expn%]
+`..'=
+%expn%, Use: 'routers'!?, Type: 'boolean', Default: 'true'
+===
+
+cindex:[address,testing]
+cindex:[testing,addresses]
+cindex:[EXPN,router skipping]
+cindex:[router,skipping for EXPN]
+If this option is turned off, the router is skipped when testing an address
+as a result of processing an SMTP EXPN command. You might, for example,
+want to turn it off on a router for users' _.forward_ files, while leaving it
+on for the system alias file.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.
+
+The use of the SMTP EXPN command is controlled by an ACL (see chapter
+<<CHAPACL>>). When Exim is running an EXPN command, it is similar to testing
+an address with %-bt%. Compare VRFY, whose counterpart is %-bv%.
+
+
+
+oindex:[%fail_verify%]
+`..'=
+%fail_verify%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+cindex:[router,forcing verification failure]
+Setting this option has the effect of setting both %fail_verify_sender% and
+%fail_verify_recipient% to the same value.
+
+
+
+oindex:[%fail_verify_recipient%]
+`..'=
+%fail_verify_recipient%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+If this option is true and an address is accepted by this router when
+verifying a recipient, verification fails.
+
+
+
+oindex:[%fail_verify_sender%]
+`..'=
+%fail_verify_sender%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+If this option is true and an address is accepted by this router when
+verifying a sender, verification fails.
+
+
+
+oindex:[%fallback_hosts%]
+`..'=
+%fallback_hosts%, Use: 'routers', Type: 'string list', Default: 'unset'
+===
+
+cindex:[router,fallback hosts]
+cindex:[fallback,hosts specified on router]
+String expansion is not applied to this option. The argument must be a
+colon-separated list of host names or IP addresses. If a router queues an
+address for a remote transport, this host list is associated with the address,
+and used instead of the transport's fallback host list. If %hosts_randomize%
+is set on the transport, the order of the list is randomized for each use. See
+the %fallback_hosts% option of the ^smtp^ transport for further details.
+
+
+oindex:[%group%]
+`..'=
+%group%, Use: 'routers', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[gid (group id),local delivery]
+cindex:[local transports,uid and gid]
+cindex:[transport,local]
+cindex:[router,setting group]
+When a router queues an address for a transport, and the transport does not
+specify a group, the group given here is used when running the delivery
+process.
+The group may be specified numerically or by name. If expansion fails, the
+error is logged and delivery is deferred.
+The default is unset, unless %check_local_user% is set, when the default
+is taken from the password information. See also %initgroups% and %user% and
+the discussion in chapter <<CHAPenvironment>>.
+
+
+
+oindex:[%headers_add%]
+`..'=
+%headers_add%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[header lines,adding]
+cindex:[router,adding header lines]
+This option specifies a string of text that is expanded at routing time, and
+associated with any addresses that are accepted by the router. However, this
+option has no effect when an address is just being verified. The way in which
+the text is used to add header lines at transport time is described in section
+<<SECTheadersaddrem>>.
+
+The %headers_add% option is expanded after %errors_to%, but before
+%headers_remove% and %transport%. If the expanded string is empty, or if the
+expansion is forced to fail, the option has no effect. Other expansion failures
+are treated as configuration errors.
+
+*Warning*: The %headers_add% option cannot be used for a ^redirect^
+router that has the %one_time% option set.
+
+
+
+
+oindex:[%headers_remove%]
+`..'=
+%headers_remove%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[header lines,removing]
+cindex:[router,removing header lines]
+This option specifies a string of text that is expanded at routing time, and
+associated with any addresses that are accepted by the router. However, this
+option has no effect when an address is just being verified. The way in which
+the text is used to remove header lines at transport time is described in
+section <<SECTheadersaddrem>>.
+
+The %headers_remove% option is expanded after %errors_to% and %headers_add%,
+but before %transport%. If the expansion is forced to fail, the option has no
+effect. Other expansion failures are treated as configuration errors.
+
+*Warning*: The %headers_remove% option cannot be used for a ^redirect^
+router that has the %one_time% option set.
+
+
+
+
+oindex:[%ignore_target_hosts%]
+`..'=
+%ignore_target_hosts%, Use: 'routers', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[IP address,discarding]
+cindex:[router,discarding IP addresses]
+Although this option is a host list, it should normally contain IP address
+entries rather than names. If any host that is looked up by the router has an
+IP address that matches an item in this list, Exim behaves as if that IP
+address did not exist. This option allows you to cope with rogue DNS entries
+like
+
+ remote.domain.example. A 127.0.0.1
+
+by setting
+
+ ignore_target_hosts = 127.0.0.1
+
+on the relevant router. If all the hosts found by a ^dnslookup^ router are
+discarded in this way, the router declines. In a conventional configuration, an
+attempt to mail to such a domain would normally provoke the ``unrouteable
+domain'' error, and an attempt to verify an address in the domain would fail.
+
+Similarly, if %ignore_target_hosts% is set on an ^ipliteral^ router, the
+router declines if presented with one of the listed addresses.
+
+This option may also be useful for ignoring link-local and site-local IPv6
+addresses. Because, like all host lists, the value of %ignore_target_hosts%
+is expanded before use as a list, it is possible to make it dependent on the
+domain that is being routed.
+
+During its expansion, $host_address$ is set to the IP address that is being
+checked.
+
+oindex:[%initgroups%]
+`..'=
+%initgroups%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+cindex:[additional groups]
+cindex:[groups, additional]
+cindex:[local transports,uid and gid]
+cindex:[transport,local]
+If the router queues an address for a transport, and this option is true, and
+the uid supplied by the router is not overridden by the transport, the
+'initgroups()' function is called when running the transport to ensure that
+any additional groups associated with the uid are set up. See also %group% and
+%user% and the discussion in chapter <<CHAPenvironment>>.
+
+
+
+oindex:[%local_part_prefix%]
+`..'=
+%local_part_prefix%, Use: 'routers'!?, Type: 'string list', Default: 'unset'
+===
+
+cindex:[router,prefix for local part]
+cindex:[prefix,for local part; used in router]
+If this option is set, the router is skipped unless the local part
+starts with one of the given strings, or %local_part_prefix_optional% is
+true.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.
+
+The list is scanned from left to right, and the first prefix that matches is
+used. A limited form of wildcard is available; if the prefix begins with an
+asterisk, it matches the longest possible sequence of arbitrary characters at
+the start of the local part. An asterisk should therefore always be followed by
+some character that does not occur in normal local parts.
+
+cindex:[multiple mailboxes]
+cindex:[mailbox,multiple]
+Wildcarding can be used to set up multiple user mailboxes, as described in
+section <<SECTmulbox>>.
+
+During the testing of the %local_parts% option, and while the router is
+running, the prefix is removed from the local part, and is available in the
+expansion variable $local_part_prefix$. If the router accepts the address,
+this remains true during subsequent delivery.
+In particular, the local part that is transmitted in the RCPT command
+for LMTP, SMTP, and BSMTP deliveries has the prefix removed by default. This
+behaviour can be overridden by setting %rcpt_include_affixes% true on the
+relevant transport.
+
+The prefix facility is commonly used to handle local parts of the form
+%owner-something%. Another common use is to support local parts of the form
+%real-username% to bypass a user's _.forward_ file -- helpful when trying to
+tell a user their forwarding is broken -- by placing a router like this one
+immediately before the router that handles _.forward_ files:
+
+ real_localuser:
+ driver = accept
+ local_part_prefix = real-
+ check_local_user
+ transport = local_delivery
+
+If both %local_part_prefix% and %local_part_suffix% are set for a router,
+both conditions must be met if not optional. Care must be taken if wildcards
+are used in both a prefix and a suffix on the same router. Different
+separator characters must be used to avoid ambiguity.
+
+
+oindex:[%local_part_prefix_optional%]
+`..'=
+%local_part_prefix_optional%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+See %local_part_prefix% above.
+
+
+
+oindex:[%local_part_suffix%]
+`..'=
+%local_part_suffix%, Use: 'routers'!?, Type: 'string list', Default: 'unset'
+===
+
+cindex:[router,suffix for local part]
+cindex:[suffix for local part, used in router]
+This option operates in the same way as %local_part_prefix%, except that the
+local part must end (rather than start) with the given string, the
+%local_part_suffix_optional% option determines whether the suffix is
+mandatory, and the wildcard \* character, if present, must be the last
+character of the suffix. This option facility is commonly used to handle local
+parts of the form %something-request% and multiple user mailboxes of the form
+%username-foo%.
+
+
+oindex:[%local_part_suffix_optional%]
+`..'=
+%local_part_suffix_optional%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+See %local_part_suffix% above.
+
+
+
+oindex:[%local_parts%]
+`..'=
+%local_parts%, Use: 'routers'!?, Type: 'local part list'!!, Default: 'unset'
+===
+
+cindex:[router,restricting to specific local parts]
+cindex:[local part,checking in router]
+The router is run only if the local part of the address matches the list.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated, and
+section <<SECTlocparlis>> for a discussion of local part lists. Because the
+string is expanded, it is possible to make it depend on the domain, for
+example:
+
+ local_parts = dbm;/usr/local/specials/$domain
+
+If the match is achieved by a lookup, the data that the lookup returned
+for the local part is placed in the variable $local_part_data$ for use in
+expansions of the router's private options. You might use this option, for
+example, if you have a large number of local virtual domains, and you want to
+send all postmaster mail to the same place without having to set up an alias in
+each virtual domain:
+
+ postmaster:
+ driver = redirect
+ local_parts = postmaster
+ data = postmaster@real.domain.example
+
+
+
+
+oindex:[%log_as_local%]
+`..'=
+%log_as_local%, Use: 'routers', Type: 'boolean', Default: 'see below'
+===
+
+cindex:[log,delivery line]
+cindex:[delivery,log line format]
+Exim has two logging styles for delivery, the idea being to make local
+deliveries stand out more visibly from remote ones. In the ``local'' style, the
+recipient address is given just as the local part, without a domain. The use of
+this style is controlled by this option. It defaults to true for the ^accept^
+router, and false for all the others.
+
+
+
+oindex:[%more%]
+`..'=
+%more%, Use: 'routers', Type: 'boolean'!!, Default: 'true'
+===
+
+The result of string expansion for this option must be a valid boolean value,
+that is, one of the strings ``yes'', ``no'', ``true'', or ``false''. Any other
+result causes an error, and delivery is deferred. If the expansion is forced to
+fail, the default value for the option (true) is used. Other failures cause
+delivery to be deferred.
+
+If this option is set false, and the router is run, but declines to handle the
+address, no further routers are tried, routing fails, and the address is
+bounced.
+cindex:[%self% option]
+However, if the router explicitly passes an address to the following router by
+means of the setting
+
+ self = pass
+
+or otherwise, the setting of %more% is ignored. Also, the setting of %more%
+does not affect the behaviour if one of the precondition tests fails. In that
+case, the address is always passed to the next router.
+
+
+
+oindex:[%pass_on_timeout%]
+`..'=
+%pass_on_timeout%, Use: 'routers', Type: 'boolean', Default: 'false'
+===
+
+cindex:[timeout,of router]
+cindex:[router,timeout]
+If a router times out during a host lookup, it normally causes deferral of the
+address. If %pass_on_timeout% is set, the address is passed on to the next
+router, overriding %no_more%. This may be helpful for systems that are
+intermittently connected to the Internet, or those that want to pass to a smart
+host any messages that cannot immediately be delivered.
+
+There are occasional other temporary errors that can occur while doing DNS
+lookups. They are treated in the same way as a timeout, and this option
+applies to all of them.
+
+
+
+oindex:[%pass_router%]
+`..'=
+%pass_router%, Use: 'routers', Type: 'string', Default: 'unset'
+===
+
+cindex:[router,go to after ``pass'']
+When a router returns ``pass'', the address is normally handed on to the next
+router in sequence. This can be changed by setting %pass_router% to the name
+of another router. However (unlike %redirect_router%) the named router must be
+below the current router, to avoid loops. Note that this option applies only to
+the special case of ``pass''. It does not apply when a router returns ``decline''.
+
+
+
+oindex:[%redirect_router%]
+`..'=
+%redirect_router%, Use: 'routers', Type: 'string', Default: 'unset'
+===
+
+cindex:[router,start at after redirection]
+Sometimes an administrator knows that it is pointless to reprocess addresses
+generated from alias or forward files with the same router again. For
+example, if an alias file translates real names into login ids there is no
+point searching the alias file a second time, especially if it is a large file.
+
+The %redirect_router% option can be set to the name of any router instance. It
+causes the routing of any generated addresses to start at the named router
+instead of at the first router. This option has no effect if the router in
+which it is set does not generate new addresses.
+
+
+
+oindex:[%require_files%]
+`..'=
+%require_files%, Use: 'routers'!?, Type: 'string list'!!, Default: 'unset'
+===
+
+cindex:[file,requiring for router]
+cindex:[router,requiring file existence]
+This option provides a general mechanism for predicating the running of a
+router on the existence or non-existence of certain files or directories.
+Before running a router, as one of its precondition tests, Exim works its way
+through the %require_files% list, expanding each item separately.
+
+Because the list is split before expansion, any colons in expansion items must
+be doubled, or the facility for using a different list separator must be used.
+If any expansion is forced to fail, the item is ignored. Other expansion
+failures cause routing of the address to be deferred.
+
+If any expanded string is empty, it is ignored. Otherwise, except as described
+below, each string must be a fully qualified file path, optionally preceded by
+``!''. The paths are passed to the 'stat()' function to test for the existence
+of the files or directories. The router is skipped if any paths not preceded by
+``!'' do not exist, or if any paths preceded by ``!'' do exist.
+
+cindex:[NFS]
+If 'stat()' cannot determine whether a file exists or not, delivery of
+the message is deferred. This can happen when NFS-mounted filesystems are
+unavailable.
+
+This option is checked after the %domains%, %local_parts%, and %senders%
+options, so you cannot use it to check for the existence of a file in which to
+look up a domain, local part, or sender. (See section <<SECTrouprecon>> for a
+full list of the order in which preconditions are evaluated.) However, as
+these options are all expanded, you can use the %exists% expansion condition to
+make such tests. The %require_files% option is intended for checking files
+that the router may be going to use internally, or which are needed by a
+transport (for example _.procmailrc_).
+
+During delivery, the 'stat()' function is run as root, but there is a
+facility for some checking of the accessibility of a file by another user.
+This is not a proper permissions check, but just a ``rough'' check that
+operates as follows:
+
+If an item in a %require_files% list does not contain any forward slash
+characters, it is taken to be the user (and optional group, separated by a
+comma) to be checked for subsequent files in the list. If no group is specified
+but the user is specified symbolically, the gid associated with the uid is
+used. For example:
+
+ require_files = mail:/some/file
+ require_files = $local_part:$home/.procmailrc
+
+If a user or group name in a %require_files% list does not exist, the
+%require_files% condition fails.
+
+Exim performs the check by scanning along the components of the file path, and
+checking the access for the given uid and gid. It checks for ``x'' access on
+directories, and ``r'' access on the final file. Note that this means that file
+access control lists, if the operating system has them, are ignored.
+
+*Warning 1*: When the router is being run to verify addresses for an
+incoming SMTP message, Exim is not running as root, but under its own uid. This
+may affect the result of a %require_files% check. In particular, 'stat()'
+may yield the error EACCES (``Permission denied''). This means that the Exim
+user is not permitted to read one of the directories on the file's path.
+
+*Warning 2*: Even when Exim is running as root while delivering a message,
+'stat()' can yield EACCES for a file in an NFS directory that is mounted
+without root access.
+
+In this case, if a check for access by a particular user is requested, Exim
+creates a subprocess that runs as that user, and tries the check again in that
+process.
+
+The default action for handling an unresolved EACCES is to consider it to
+be caused by a configuration error,
+
+and routing is deferred because the existence or non-existence of the file
+cannot be determined. However, in some circumstances it may be desirable to
+treat this condition as if the file did not exist. If the file name (or the
+exclamation mark that precedes the file name for non-existence) is preceded by
+a plus sign, the EACCES error is treated as if the file did not exist. For
+example:
+
+ require_files = +/some/file
+
+If the router is not an essential part of verification (for example, it
+handles users' _.forward_ files), another solution is to set the %verify%
+option false so that the router is skipped when verifying.
+
+
+
+oindex:[%retry_use_local_part%]
+`..'=
+%retry_use_local_part%, Use: 'routers', Type: 'boolean', Default: 'see below'
+===
+
+cindex:[hints database,retry keys]
+cindex:[local part,in retry keys]
+When a delivery suffers a temporary routing failure, a retry record is created
+in Exim's hints database. For addresses whose routing depends only on the
+domain, the key for the retry record should not involve the local part, but for
+other addresses, both the domain and the local part should be included.
+Usually, remote routing is of the former kind, and local routing is of the
+latter kind.
+
+This option controls whether the local part is used to form the key for retry
+hints for addresses that suffer temporary errors while being handled by this
+router. The default value is true for any router that has %check_local_user%
+set, and false otherwise. Note that this option does not apply to hints keys
+for transport delays; they are controlled by a generic transport option of the
+same name.
+
+The setting of %retry_use_local_part% applies only to the router on which it
+appears. If the router generates child addresses, they are routed
+independently; this setting does not become attached to them.
+
+
+
+oindex:[%router_home_directory%]
+`..'=
+%router_home_directory%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[router,home directory for]
+cindex:[home directory,for router]
+This option sets a home directory for use while the router is running. (Compare
+%transport_home_directory%, which sets a home directory for later
+transporting.) In particular, if used on a ^redirect^ router, this option
+sets a value for $home$ while a filter is running. The value is expanded;
+forced expansion failure causes the option to be ignored -- other failures
+cause the router to defer.
+
+Expansion of %router_home_directory% happens immediately after the
+%check_local_user% test (if configured), before any further expansions take
+place.
+(See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.)
+While the router is running, %router_home_directory% overrides the value of
+$home$ that came from %check_local_user%.
+
+When a router accepts an address and routes it to a transport (including the
+cases when a redirect router generates a pipe, file, or autoreply delivery),
+the home directory setting for the transport is taken from the first of these
+values that is set:
+
+- The %home_directory% option on the transport;
+
+- The %transport_home_directory% option on the router;
+
+- The password data if %check_local_user% is set on the router;
+
+- The %router_home_directory% option on the router.
+
+In other words, %router_home_directory% overrides the password data for the
+router, but not for the transport.
+
+
+
+oindex:[%self%]
+`..'=
+%self%, Use: 'routers', Type: 'string', Default: 'freeze'
+===
+
+cindex:[MX record,pointing to local host]
+cindex:[local host,MX pointing to]
+This option applies to those routers that use a recipient address to find a
+list of remote hosts. Currently, these are the ^dnslookup^, ^ipliteral^,
+and ^manualroute^ routers.
+Certain configurations of the ^queryprogram^ router can also specify a list
+of remote hosts.
+Usually such routers are configured to send the message to a remote host via an
+^smtp^ transport. The %self% option specifies what happens when the first
+host on the list turns out to be the local host.
+The way in which Exim checks for the local host is described in section
+<<SECTreclocipadd>>.
+
+Normally this situation indicates either an error in Exim's configuration (for
+example, the router should be configured not to process this domain), or an
+error in the DNS (for example, the MX should not point to this host). For this
+reason, the default action is to log the incident, defer the address, and
+freeze the message. The following alternatives are provided for use in special
+cases:
+
+%defer%::
+Delivery of the message is tried again later, but the message is not frozen.
+
+%reroute%: <'domain'>::
+The domain is changed to the given domain, and the address is passed back to
+be reprocessed by the routers. No rewriting of headers takes place. This
+behaviour is essentially a redirection.
+
+%reroute: rewrite:% <'domain'>::
+The domain is changed to the given domain, and the address is passed back to be
+reprocessed by the routers. Any headers that contain the original domain are
+rewritten.
+
+%pass%::
+The router passes the address to the next router, or to the router named in the
+%pass_router% option if it is set.
+cindex:[%more% option]
+This overrides %no_more%.
++
+During subsequent routing and delivery, the variable $self_hostname$ contains
+the name of the local host that the router encountered. This can be used to
+distinguish between different cases for hosts with multiple names. The
+combination
+
+ self = pass
+ no_more
++
+ensures that only those addresses that routed to the local host are passed on.
+Without %no_more%, addresses that were declined for other reasons would also
+be passed to the next router.
+
+%fail%::
+Delivery fails and an error report is generated.
+
+%send%::
+cindex:[local host,sending to]
+The anomaly is ignored and the address is queued for the transport. This
+setting should be used with extreme caution. For an ^smtp^ transport, it makes
+sense only in cases where the program that is listening on the SMTP port is not
+this version of Exim. That is, it must be some other MTA, or Exim with a
+different configuration file that handles the domain in another way.
+
+
+
+oindex:[%senders%]
+`..'=
+%senders%, Use: 'routers'!?, Type: 'address list'!!, Default: 'unset'
+===
+
+cindex:[router,checking senders]
+If this option is set, the router is skipped unless the message's sender
+address matches something on the list.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.
+
+There are issues concerning verification when the running of routers is
+dependent on the sender. When Exim is verifying the address in an %errors_to%
+setting, it sets the sender to the null string. When using the %-bt% option to
+check a configuration file, it is necessary also to use the %-f% option to set
+an appropriate sender. For incoming mail, the sender is unset when verifying
+the sender, but is available when verifying any recipients. If the SMTP
+VRFY command is enabled, it must be used after MAIL if the sender
+address matters.
+
+
+oindex:[%translate_ip_address%]
+`..'=
+%translate_ip_address%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[IP address,translating]
+cindex:[packet radio]
+cindex:[router,IP address translation]
+There exist some rare networking situations (for example, packet radio) where
+it is helpful to be able to translate IP addresses generated by normal routing
+mechanisms into other IP addresses, thus performing a kind of manual IP
+routing. This should be done only if the normal IP routing of the TCP/IP stack
+is inadequate or broken. Because this is an extremely uncommon requirement, the
+code to support this option is not included in the Exim binary unless
+SUPPORT_TRANSLATE_IP_ADDRESS=yes is set in _Local/Makefile_.
+
+The %translate_ip_address% string is expanded for every IP address generated
+by the router, with the generated address set in $host_address$. If the
+expansion is forced to fail, no action is taken.
+For any other expansion error, delivery of the message is deferred.
+If the result of the expansion is an IP address, that replaces the original
+address; otherwise the result is assumed to be a host name -- this is looked up
+using 'gethostbyname()' (or 'getipnodebyname()' when available) to produce
+one or more replacement IP addresses. For example, to subvert all IP addresses
+in some specific networks, this could be added to a router:
+
+....
+translate_ip_address = \
+ ${lookup{${mask:$host_address/26}}lsearch{/some/file}{$value}fail}}
+....
+
+The file would contain lines like
+
+ 10.2.3.128/26 some.host
+ 10.8.4.34/26 10.44.8.15
+
+You should not make use of this facility unless you really understand what you
+are doing.
+
+
+
+oindex:[%transport%]
+`..'=
+%transport%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+This option specifies the transport to be used when a router accepts an address
+and sets it up for delivery. A transport is never needed if a router is used
+only for verification. The value of the option is expanded at routing time,
+after the expansion of %errors_to%, %headers_add%, and %headers_remove%, and
+result must be the name of one of the configured transports. If it is not,
+delivery is deferred.
+
+The %transport% option is not used by the ^redirect^ router, but it does have
+some private options that set up transports for pipe and file deliveries (see
+chapter <<CHAPredirect>>).
+
+
+
+oindex:[%transport_current_directory%]
+`..'=
+%transport_current_directory%, Use: 'routers', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[current directory for local transport]
+This option associates a current directory with any address that is routed
+to a local transport. This can happen either because a transport is
+explicitly configured for the router, or because it generates a delivery to a
+file or a pipe. During the delivery process (that is, at transport time), this
+option string is expanded and is set as the current directory, unless
+overridden by a setting on the transport.
+If the expansion fails for any reason, including forced failure, an error is
+logged, and delivery is deferred.
+See chapter <<CHAPenvironment>> for details of the local delivery environment.
+
+
+
+
+oindex:[%transport_home_directory%]
+`..'=
+%transport_home_directory%, Use: 'routers', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[home directory,for local transport]
+This option associates a home directory with any address that is routed to a
+local transport. This can happen either because a transport is explicitly
+configured for the router, or because it generates a delivery to a file or a
+pipe. During the delivery process (that is, at transport time), the option
+string is expanded and is set as the home directory, unless overridden by a
+setting of %home_directory% on the transport.
+If the expansion fails for any reason, including forced failure, an error is
+logged, and delivery is deferred.
+
+If the transport does not specify a home directory, and
+%transport_home_directory% is not set for the router, the home directory for
+the tranport is taken from the password data if %check_local_user% is set for
+the router. Otherwise it is taken from %router_home_directory% if that option
+is set; if not, no home directory is set for the transport.
+
+See chapter <<CHAPenvironment>> for further details of the local delivery
+environment.
+
+
+
+
+oindex:[%unseen%]
+`..'=
+%unseen%, Use: 'routers', Type: 'boolean'!!, Default: 'false'
+===
+
+cindex:[router,carrying on after success]
+The result of string expansion for this option must be a valid boolean value,
+that is, one of the strings ``yes'', ``no'', ``true'', or ``false''. Any other result
+causes an error, and delivery is deferred. If the expansion is forced to fail,
+the default value for the option (false) is used. Other failures cause delivery
+to be deferred.
+
+When this option is set true, routing does not cease if the router accepts the
+address. Instead, a copy of the incoming address is passed to the next router,
+overriding a false setting of %more%. There is little point in setting %more%
+false if %unseen% is always true, but it may be useful in cases when the value
+of %unseen% contains expansion items (and therefore, presumably, is sometimes
+true and sometimes false).
+
+cindex:[copy of message (%unseen% option)]
+The %unseen% option can be used to cause copies of messages to be delivered to
+some other destination, while also carrying out a normal delivery. In effect,
+the current address is made into a ``parent'' that has two children -- one that
+is delivered as specified by this router, and a clone that goes on to be routed
+further.
+
+Header lines added to the address (or specified for removal) by this router or
+by previous routers affect the ``unseen'' copy of the message only. The clone
+that continues to be processed by further routers starts with no added headers
+and none specified for removal.
+
+However, any data that was set by the %address_data% option in the current or
+previous routers is passed on. Setting this option has a similar effect to the
+%unseen% command qualifier in filter files.
+
+
+
+oindex:[%user%]
+`..'=
+%user%, Use: 'routers', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[uid (user id),local delivery]
+cindex:[local transports,uid and gid]
+cindex:[transport,local]
+cindex:[router,user for filter processing]
+cindex:[filter,user for processing]
+When a router queues an address for a transport, and the transport does not
+specify a user, the user given here is used when running the delivery process.
+The user may be specified numerically or by name. If expansion fails, the
+error is logged and delivery is deferred.
+This user is also used by the ^redirect^ router when running a filter file.
+The default is unset, except when %check_local_user% is set. In this case,
+the default is taken from the password information. If the user is specified as
+a name, and %group% is not set, the group associated with the user is used. See
+also %initgroups% and %group% and the discussion in chapter <<CHAPenvironment>>.
+
+
+
+oindex:[%verify%]
+`..'=
+%verify%, Use: 'routers'!?, Type: 'boolean', Default: 'true'
+===
+
+Setting this option has the effect of setting %verify_sender% and
+%verify_recipient% to the same value.
+
+
+oindex:[%verify_only%]
+`..'=
+%verify_only%, Use: 'routers'!?, Type: 'boolean', Default: 'false'
+===
+
+cindex:[EXPN,with %verify_only%]
+cindex:[%-bv% option]
+cindex:[router,used only when verifying]
+If this option is set, the router is used only when verifying an address or
+testing with the %-bv% option, not when actually doing a delivery, testing
+with the %-bt% option, or running the SMTP EXPN command. It can be further
+restricted to verifying only senders or recipients by means of %verify_sender%
+and %verify_recipient%.
+
+*Warning*: When the router is being run to verify addresses for an incoming
+SMTP message, Exim is not running as root, but under its own uid. If the router
+accesses any files, you need to make sure that they are accessible to the Exim
+user or group.
+
+
+oindex:[%verify_recipient%]
+`..'=
+%verify_recipient%, Use: 'routers'!?, Type: 'boolean', Default: 'true'
+===
+
+If this option is false, the router is skipped when verifying recipient
+addresses
+or testing recipient verification using %-bv%.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.
+
+
+oindex:[%verify_sender%]
+`..'=
+%verify_sender%, Use: 'routers'!?, Type: 'boolean', Default: 'true'
+===
+
+If this option is false, the router is skipped when verifying sender addresses
+or testing sender verification using %-bvs%.
+See section <<SECTrouprecon>> for a list of the order in which preconditions
+are evaluated.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The accept router
+-----------------
+cindex:[^accept^ router]
+cindex:[routers,^accept^]
+The ^accept^ router has no private options of its own. Unless it is being used
+purely for verification (see %verify_only%) a transport is required to be
+defined by the generic %transport% option. If the preconditions that are
+specified by generic options are met, the router accepts the address and queues
+it for the given transport. The most common use of this router is for setting
+up deliveries to local mailboxes. For example:
+
+ localusers:
+ driver = accept
+ domains = mydomain.example
+ check_local_user
+ transport = local_delivery
+
+The %domains% condition in this example checks the domain of the address, and
+%check_local_user% checks that the local part is the login of a local user.
+When both preconditions are met, the ^accept^ router runs, and queues the
+address for the ^local_delivery^ transport.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPdnslookup]]
+The dnslookup router
+--------------------
+cindex:[^dnslookup^ router]
+cindex:[routers,^dnslookup^]
+The ^dnslookup^ router looks up the hosts that handle mail for the
+recipient's domain in the DNS. A transport must always be set for this router,
+unless %verify_only% is set.
+
+If SRV support is configured (see %check_srv% below), Exim first searches for
+SRV records. If none are found, or if SRV support is not configured,
+MX records are looked up. If no MX records exist, address records are sought.
+However, %mx_domains% can be set to disable the direct use of address records.
+
+MX records of equal priority are sorted by Exim into a random order. Exim then
+looks for address records for the host names obtained from MX or SRV records.
+When a host has more than one IP address, they are sorted into a random order,
+except that IPv6 addresses are always sorted before IPv4 addresses. If all the
+IP addresses found are discarded by a setting of the %ignore_target_hosts%
+generic option, the router declines.
+
+Unless they have the highest priority (lowest MX value), MX records that point
+to the local host, or to any host name that matches %hosts_treat_as_local%,
+are discarded, together with any other MX records of equal or lower priority.
+
+cindex:[MX record,pointing to local host]
+cindex:[local host,MX pointing to]
+cindex:[%self% option,in ^dnslookup^ router]
+If the host pointed to by the highest priority MX record, or looked up as an
+address record, is the local host, or matches %hosts_treat_as_local%, what
+happens is controlled by the generic %self% option.
+
+
+[[SECTprowitdnsloo]]
+Problems with DNS lookups
+~~~~~~~~~~~~~~~~~~~~~~~~~
+There have been problems with DNS servers when SRV records are looked up.
+Some mis-behaving servers return a DNS error or timeout when a non-existent
+SRV record is sought. Similar problems have in the past been reported for
+MX records. The global %dns_again_means_nonexist% option can help with this
+problem, but it is heavy-handed because it is a global option.
+
+For this reason, there are two options, %srv_fail_domains% and
+%mx_fail_domains%, that control what happens when a DNS lookup in a
+^dnslookup^ router results in a DNS failure or a ``try again'' response. If an
+attempt to look up an SRV or MX record causes one of these results, and the
+domain matches the relevant list, Exim behaves as if the DNS had responded ``no
+such record''. In the case of an SRV lookup, this means that the router proceeds
+to look for MX records; in the case of an MX lookup, it proceeds to look for A
+or AAAA records, unless the domain matches %mx_domains%, in which case routing
+fails.
+
+
+
+
+Private options for dnslookup
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^dnslookup^ router]
+The private options for the ^dnslookup^ router are as follows:
+
+oindex:[%check_secondary_mx%]
+`..'=
+%check_secondary_mx%, Use: 'dnslookup', Type: 'boolean', Default: 'false'
+===
+
+cindex:[MX record,checking for secondary]
+If this option is set, the router declines unless the local host is found in
+(and removed from) the list of hosts obtained by MX lookup. This can be used to
+process domains for which the local host is a secondary mail exchanger
+differently to other domains. The way in which Exim decides whether a host is
+the local host is described in section <<SECTreclocipadd>>.
+
+
+oindex:[%check_srv%]
+`..'=
+%check_srv%, Use: 'dnslookup', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[SRV record,enabling use of]
+The ^dnslookup^ router supports the use of SRV records (see RFC 2782) in
+addition to MX and address records. The support is disabled by default. To
+enable SRV support, set the %check_srv% option to the name of the service
+required. For example,
+
+ check_srv = smtp
+
+looks for SRV records that refer to the normal smtp service. The option is
+expanded, so the service name can vary from message to message or address
+to address. This might be helpful if SRV records are being used for a
+submission service. If the expansion is forced to fail, the %check_srv%
+option is ignored, and the router proceeds to look for MX records in the
+normal way.
+
+When the expansion succeeds, the router searches first for SRV records for
+the given service (it assumes TCP protocol). A single SRV record with a
+host name that consists of just a single dot indicates ``no such service for
+this domain''; if this is encountered, the router declines. If other kinds of
+SRV record are found, they are used to construct a host list for delivery
+according to the rules of RFC 2782. MX records are not sought in this case.
+
+When no SRV records are found, MX records (and address records) are sought in
+the traditional way. In other words, SRV records take precedence over MX
+records, just as MX records take precedence over address records. Note that
+this behaviour is not sanctioned by RFC 2782, though a previous draft RFC
+defined it. It is apparently believed that MX records are sufficient for email
+and that SRV records should not be used for this purpose. However, SRV records
+have an additional ``weight'' feature which some people might find useful when
+trying to split an SMTP load between hosts of different power.
+
+See section <<SECTprowitdnsloo>> above for a discussion of Exim's behaviour when
+there is a DNS lookup error.
+
+
+
+oindex:[%mx_domains%]
+`..'=
+%mx_domains%, Use: 'dnslookup', Type: 'domain list'!!, Default: 'unset'
+===
+
+cindex:[MX record,required to exist]
+cindex:[SRV record,required to exist]
+A domain that matches %mx_domains% is required to have either an MX or an SRV
+record in order to be recognised. (The name of this option could be improved.)
+For example, if all the mail hosts in 'fict.example' are known to have MX
+records, except for those in 'discworld.fict.example', you could use this
+setting:
+
+ mx_domains = ! *.discworld.fict.example : *.fict.example
+
+This specifies that messages addressed to a domain that matches the list but
+has no MX record should be bounced immediately instead of being routed using
+the address record.
+
+
+oindex:[%mx_fail_domains%]
+`..'=
+%mx_fail_domains%, Use: 'dnslookup', Type: 'domain list'!!, Default: 'unset'
+===
+
+If the DNS lookup for MX records for one of the domains in this list causes a
+DNS lookup error, Exim behaves as if no MX records were found. See section
+<<SECTprowitdnsloo>> for more discussion.
+
+
+
+
+oindex:[%qualify_single%]
+`..'=
+%qualify_single%, Use: 'dnslookup', Type: 'boolean', Default: 'true'
+===
+
+cindex:[DNS,resolver options]
+cindex:[DNS,qualifying single-component names]
+When this option is true, the resolver option RES_DEFNAMES is set for DNS
+lookups. Typically, but not standardly, this causes the resolver to qualify
+single-component names with the default domain. For example, on a machine
+called 'dictionary.ref.example', the domain 'thesaurus' would be changed to
+'thesaurus.ref.example' inside the resolver. For details of what your resolver
+actually does, consult your man pages for 'resolver' and 'resolv.conf'.
+
+
+
+oindex:[%rewrite_headers%]
+`..'=
+%rewrite_headers%, Use: 'dnslookup', Type: 'boolean', Default: 'true'
+===
+
+cindex:[rewriting,header lines]
+cindex:[header lines,rewriting]
+If the domain name in the address that is being processed is not fully
+qualified, it may be expanded to its full form by a DNS lookup. For example, if
+an address is specified as 'dormouse@teaparty', the domain might be
+expanded to 'teaparty.wonderland.fict.example'. Domain expansion can also
+occur as a result of setting the %widen_domains% option. If %rewrite_headers%
+is true, all occurrences of the abbreviated domain name in any 'Bcc:', 'Cc:',
+'From:', 'Reply-to:', 'Sender:', and 'To:' header lines of the message are
+rewritten with the full domain name.
+
+This option should be turned off only when it is known that no message is
+ever going to be sent outside an environment where the abbreviation makes
+sense.
+
+When an MX record is looked up in the DNS and matches a wildcard record, name
+servers normally return a record containing the name that has been looked up,
+making it impossible to detect whether a wildcard was present or not. However,
+some name servers have recently been seen to return the wildcard entry. If the
+name returned by a DNS lookup begins with an asterisk, it is not used for
+header rewriting.
+
+
+oindex:[%same_domain_copy_routing%]
+`..'=
+%same_domain_copy_routing%, Use: 'dnslookup', Type: 'boolean', Default: 'false'
+===
+
+cindex:[address,copying routing]
+Addresses with the same domain are normally routed by the ^dnslookup^ router
+to the same list of hosts. However, this cannot be presumed, because the router
+options and preconditions may refer to the local part of the address. By
+default, therefore, Exim routes each address in a message independently. DNS
+servers run caches, so repeated DNS lookups are not normally expensive, and in
+any case, personal messages rarely have more than a few recipients.
+
+If you are running mailing lists with large numbers of subscribers at the same
+domain, and you are using a ^dnslookup^ router which is independent of the
+local part, you can set %same_domain_copy_routing% to bypass repeated DNS
+lookups for identical domains in one message. In this case, when ^dnslookup^
+routes an address to a remote transport, any other unrouted addresses in the
+message that have the same domain are automatically given the same routing
+without processing them independently,
+provided the following conditions are met:
+
+- No router that processed the address specified %headers_add% or
+%headers_remove%.
+
+- The router did not change the address in any way, for example, by ``widening''
+the domain.
+
+
+
+
+oindex:[%search_parents%]
+`..'=
+%search_parents%, Use: 'dnslookup', Type: 'boolean', Default: 'false'
+===
+
+cindex:[DNS,resolver options]
+When this option is true, the resolver option RES_DNSRCH is set for DNS
+lookups. This is different from the %qualify_single% option in that it applies
+to domains containing dots. Typically, but not standardly, it causes the
+resolver to search for the name in the current domain and in parent domains.
+For example, on a machine in the 'fict.example' domain, if looking up
+'teaparty.wonderland' failed, the resolver would try
+'teaparty.wonderland.fict.example'. For details of what your resolver
+actually does, consult your man pages for 'resolver' and 'resolv.conf'.
+
+Setting this option true can cause problems in domains that have a wildcard MX
+record, because any domain that does not have its own MX record matches the
+local wildcard.
+
+
+
+oindex:[%srv_fail_domains%]
+`..'=
+%srv_fail_domains%, Use: 'dnslookup', Type: 'domain list'!!, Default: 'unset'
+===
+
+If the DNS lookup for SRV records for one of the domains in this list causes a
+DNS lookup error, Exim behaves as if no SRV records were found. See section
+<<SECTprowitdnsloo>> for more discussion.
+
+
+
+
+oindex:[%widen_domains%]
+`..'=
+%widen_domains%, Use: 'dnslookup', Type: 'string list', Default: 'unset'
+===
+
+cindex:[domain,partial; widening]
+If a DNS lookup fails and this option is set, each of its strings in turn is
+added onto the end of the domain, and the lookup is tried again. For example,
+if
+
+ widen_domains = fict.example:ref.example
+
+is set and a lookup of 'klingon.dictionary' fails,
+'klingon.dictionary.fict.example' is looked up, and if this fails,
+'klingon.dictionary.ref.example' is tried. Note that the %qualify_single%
+and %search_parents% options can cause some widening to be undertaken inside
+the DNS resolver.
+
+
+
+Effect of qualify_single and search_parents
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+When a domain from an envelope recipient is changed by the resolver as a result
+of the %qualify_single% or %search_parents% options, Exim rewrites the
+corresponding address in the message's header lines unless %rewrite_headers%
+is set false. Exim then re-routes the address, using the full domain.
+
+These two options affect only the DNS lookup that takes place inside the router
+for the domain of the address that is being routed. They do not affect lookups
+such as that implied by
+
+ domains = @mx_any
+
+that may happen while processing a router precondition before the router is
+entered. No widening ever takes place for these lookups.
+
+
+
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The ipliteral router
+--------------------
+cindex:[^ipliteral^ router]
+cindex:[domain literal,routing]
+cindex:[routers,^ipliteral^]
+This router has no private options. Unless it is being used purely for
+verification (see %verify_only%) a transport is required to be defined by the
+generic %transport% option. The router accepts the address if its domain part
+takes the form of an RFC 2822 domain literal, that is, an IP address enclosed
+in square brackets. For example, this router handles the address
+
+ root@[192.168.1.1]
+
+by setting up delivery to the host with that IP address.
+
+cindex:[%self% option,in ^ipliteral^ router]
+If the IP address matches something in %ignore_target_hosts%, the router
+declines. If an IP literal turns out to refer to the local host, the generic
+%self% option determines what happens.
+
+The RFCs require support for domain literals; however, their use is
+controversial in today's Internet. If you want to use this router, you must
+also set the main configuration option %allow_domain_literals%. Otherwise,
+Exim will not recognize the domain literal syntax in addresses.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The iplookup router
+-------------------
+cindex:[^iplookup^ router]
+cindex:[routers,^iplookup^]
+The ^iplookup^ router was written to fulfil a specific requirement in
+Cambridge University (which in fact no longer exists). For this reason, it is
+not included in the binary of Exim by default. If you want to include it, you
+must set
+
+ ROUTER_IPLOOKUP=yes
+
+in your _Local/Makefile_ configuration file.
+
+The ^iplookup^ router routes an address by sending it over a TCP or UDP
+connection to one or more specific hosts. The host can then return the same or
+a different address -- in effect rewriting the recipient address in the
+message's envelope. The new address is then passed on to subsequent routers. If
+this process fails, the address can be passed on to other routers, or delivery
+can be deferred.
+
+Background, for those that are interested: We have an Oracle database of all
+Cambridge users, and one of the items of data it maintains for each user is
+where to send mail addressed to 'user@cam.ac.uk'. The MX records for
+'cam.ac.uk' point to a central machine that has a large alias list that is
+abstracted from the database. Mail from outside is switched by this system, and
+originally internal mail was also done this way. However, this resulted in a
+fair number of messages travelling from some of our larger systems to the
+switch and back again. The Oracle machine now runs a UDP service that can be
+called by the ^iplookup^ router in Exim to find out where 'user@cam.ac.uk'
+addresses really have to go; this saves passing through the central switch, and
+in many cases saves doing any remote delivery at all.
+
+Since ^iplookup^ is just a rewriting router, a transport must not be
+specified for it.
+cindex:[options,^iplookup^ router]
+
+
+oindex:[%hosts%]
+`..'=
+%hosts%, Use: 'iplookup', Type: 'string', Default: 'unset'
+===
+
+This option must be supplied. Its value is a colon-separated list of host
+names. The hosts are looked up using 'gethostbyname()'
+(or 'getipnodebyname()' when available)
+and are tried in order until one responds to the query. If none respond, what
+happens is controlled by %optional%.
+
+
+oindex:[%optional%]
+`..'=
+%optional%, Use: 'iplookup', Type: 'boolean', Default: 'false'
+===
+
+If %optional% is true, if no response is obtained from any host, the address is
+passed to the next router, overriding %no_more%. If %optional% is false,
+delivery to the address is deferred.
+
+
+oindex:[%port%]
+`..'=
+%port%, Use: 'iplookup', Type: 'integer', Default: '0'
+===
+
+cindex:[port,^iplookup^ router]
+This option must be supplied. It specifies the port number for the TCP or UDP
+call.
+
+
+oindex:[%protocol%]
+`..'=
+%protocol%, Use: 'iplookup', Type: 'string', Default: 'udp'
+===
+
+This option can be set to ``udp'' or ``tcp'' to specify which of the two protocols
+is to be used.
+
+
+oindex:[%query%]
+`..'=
+%query%, Use: 'iplookup', Type: 'string'!!, Default: `\$local_part@\$domain \$local_part@\$domain`
+===
+
+This defines the content of the query that is sent to the remote hosts. The
+repetition serves as a way of checking that a response is to the correct query
+in the default case (see %response_pattern% below).
+
+
+oindex:[%reroute%]
+`..'=
+%reroute%, Use: 'iplookup', Type: 'string'!!, Default: 'unset'
+===
+
+If this option is not set, the rerouted address is precisely the byte string
+returned by the remote host, up to the first white space, if any. If set, the
+string is expanded to form the rerouted address. It can include parts matched
+in the response by %response_pattern% by means of numeric variables such as
+$1$, $2$, etc. The variable $0$ refers to the entire input string,
+whether or not a pattern is in use. In all cases, the rerouted address must end
+up in the form 'local_part@domain'.
+
+
+oindex:[%response_pattern%]
+`..'=
+%response_pattern%, Use: 'iplookup', Type: 'string', Default: 'unset'
+===
+
+This option can be set to a regular expression that is applied to the string
+returned from the remote host. If the pattern does not match the response, the
+router declines. If %response_pattern% is not set, no checking of the response
+is done, unless the query was defaulted, in which case there is a check that
+the text returned after the first white space is the original address. This
+checks that the answer that has been received is in response to the correct
+question. For example, if the response is just a new domain, the following
+could be used:
+
+ response_pattern = ^([^@]+)$
+ reroute = $local_part@$1
+
+
+
+oindex:[%timeout%]
+`..'=
+%timeout%, Use: 'iplookup', Type: 'time', Default: '5s'
+===
+
+This specifies the amount of time to wait for a response from the remote
+machine. The same timeout is used for the 'connect()' function for a TCP
+call. It does not apply to UDP.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The manualroute router
+----------------------
+cindex:[^manualroute^ router]
+cindex:[routers,^manualroute^]
+cindex:[domain,manually routing]
+The ^manualroute^ router is so-called because it provides a way of manually
+routing an address according to its domain. It is mainly used when you want to
+route addresses to remote hosts according to your own rules, bypassing the
+normal DNS routing that looks up MX records. However, ^manualroute^ can also
+route to local transports, a facility that may be useful if you want to save
+messages for dial-in hosts in local files.
+
+The ^manualroute^ router compares a list of domain patterns with the domain it
+is trying to route. If there is no match, the router declines. Each pattern has
+associated with it a list of hosts and some other optional data, which may
+include a transport. The combination of a pattern and its data is called a
+``routing rule''. For patterns that do not have an associated transport, the
+generic %transport% option must specify a transport, unless the router is being
+used purely for verification (see %verify_only%).
+
+In the case of verification, matching the domain pattern is sufficient for the
+router to accept the address. When actually routing an address for delivery,
+an address that matches a domain pattern is queued for the associated
+transport. If the transport is not a local one, a host list must be associated
+with the pattern; IP addresses are looked up for the hosts, and these are
+passed to the transport along with the mail address. For local transports, a
+host list is optional. If it is present, it is passed in $host$ as a single
+text string.
+
+The list of routing rules can be provided as an inline string in %route_list%,
+or the data can be obtained by looking up the domain in a file or database by
+setting %route_data%. Only one of these settings may appear in any one
+instance of ^manualroute^. The format of routing rules is described below,
+following the list of private options.
+
+
+[[SECTprioptman]]
+Private options for manualroute
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+cindex:[options,^manualroute^ router]
+The private options for the ^manualroute^ router are as follows:
+
+
+oindex:[%host_find_failed%]
+`..'=
+%host_find_failed%, Use: 'manualroute', Type: 'string', Default: 'freeze'
+===
+
+This option controls what happens when ^manualroute^ tries to find an IP
+address for a host, and the host does not exist. The option can be set to one
+of
+
+ decline
+ defer
+ fail
+ freeze
+ pass
+
+The default assumes that this state is a serious configuration error. The
+difference between ``pass'' and ``decline'' is that the former forces the address
+to be passed to the next router (or the router defined by %pass_router%),
+cindex:[%more% option]
+overriding %no_more%, whereas the latter passes the address to the next router
+only if %more% is true.
+
+This option applies only to a definite ``does not exist'' state; if a host lookup
+gets a temporary error, delivery is deferred unless the generic
+%pass_on_timeout% option is set.
+
+
+oindex:[%hosts_randomize%]
+`..'=
+%hosts_randomize%, Use: 'manualroute', Type: 'boolean', Default: 'false'
+===
+
+cindex:[randomized host list]
+cindex:[host,list of; randomized]
+If this option is set, the order of the items in a host list in a routing rule
+is randomized each time the list is used, unless an option in the routing rule
+overrides (see below). Randomizing the order of a host list can be used to do
+crude load sharing. However, if more than one mail address is routed by the
+same router to the same host list, the host lists are considered to be the same
+(even though they may be randomized into different orders) for the purpose of
+deciding whether to batch the deliveries into a single SMTP transaction.
+
+When %hosts_randomize% is true, a host list may be split
+into groups whose order is separately randomized. This makes it possible to
+set up MX-like behaviour. The boundaries between groups are indicated by an
+item that is just `+` in the host list. For example:
+
+ route_list = * host1:host2:host3:+:host4:host5
+
+The order of the first three hosts and the order of the last two hosts is
+randomized for each use, but the first three always end up before the last two.
+If %hosts_randomize% is not set, a `+` item in the list is ignored. If a
+randomized host list is passed to an ^smtp^ transport that also has
+%hosts_randomize set%, the list is not re-randomized.
+
+
+oindex:[%route_data%]
+`..'=
+%route_data%, Use: 'manualroute', Type: 'string'!!, Default: 'unset'
+===
+
+If this option is set, it must expand to yield the data part of a routing rule.
+Typically, the expansion string includes a lookup based on the domain. For
+example:
+
+ route_data = ${lookup{$domain}dbm{/etc/routes}}
+
+If the expansion is forced to fail, or the result is an empty string, the
+router declines. Other kinds of expansion failure cause delivery to be
+deferred.
+
+
+oindex:[%route_list%]
+`..'=
+%route_list%, Use: 'manualroute', "Type: 'string list, semicolon-separated'", Default: 'unset'
+===
+
+This string is a list of routing rules, in the form defined below. Note that,
+unlike most string lists, the items are separated by semicolons. This is so
+that they may contain colon-separated host lists.
+
+
+oindex:[%same_domain_copy_routing%]
+`..'=
+%same_domain_copy_routing%, Use: 'manualroute', Type: 'boolean', Default: 'false'
+===
+
+cindex:[address,copying routing]
+Addresses with the same domain are normally routed by the ^manualroute^ router
+to the same list of hosts. However, this cannot be presumed, because the router
+options and preconditions may refer to the local part of the address. By
+default, therefore, Exim routes each address in a message independently. DNS
+servers run caches, so repeated DNS lookups are not normally expensive, and in
+any case, personal messages rarely have more than a few recipients.
+
+If you are running mailing lists with large numbers of subscribers at the same
+domain, and you are using a ^manualroute^ router which is independent of the
+local part, you can set %same_domain_copy_routing% to bypass repeated DNS
+lookups for identical domains in one message. In this case, when ^manualroute^
+routes an address to a remote transport, any other unrouted addresses in the
+message that have the same domain are automatically given the same routing
+without processing them independently. However, this is only done if
+%headers_add% and %headers_remove% are unset.
+
+
+
+
+Routing rules in route_list
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The value of %route_list% is a string consisting of a sequence of routing
+rules, separated by semicolons. If a semicolon is needed in a rule, it can be
+entered as two semicolons. Empty rules are ignored. The format of each rule is
+
+ <domain pattern> <list of hosts> <options>
+
+The following example contains two rules, each with a simple domain pattern and
+no options:
+
+....
+route_list = \
+ dict.ref.example mail-1.ref.example:mail-2.ref.example ; \
+ thes.ref.example mail-3.ref.example:mail-4.ref.example
+....
+
+The three parts of a rule are separated by white space. The pattern and the
+list of hosts can be enclosed in quotes if necessary, and if they are, the
+usual quoting rules apply. Each rule in a %route_list% must start with a
+single domain pattern, which is the only mandatory item in the rule. The
+pattern is in the same format as one item in a domain list (see section
+<<SECTdomainlist>>),
+except that it may not be the name of an interpolated file.
+That is, it may be wildcarded, or a regular expression, or a file or database
+lookup (with semicolons doubled, because of the use of semicolon as a separator
+in a %route_list%).
+
+The rules in %route_list% are searched in order until one of the patterns
+matches the domain that is being routed. The list of hosts and then options are
+then used as described below. If there is no match, the router declines. When
+%route_list% is set, %route_data% must not be set.
+
+
+
+Routing rules in route_data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The use of %route_list% is convenient when there are only a small number of
+routing rules. For larger numbers, it is easier to use a file or database to
+hold the routing information, and use the %route_data% option instead.
+The value of %route_data% is a list of hosts, followed by (optional) options.
+Most commonly, %route_data% is set as a string that contains an
+expansion lookup. For example, suppose we place two routing rules in a file
+like this:
+
+ dict.ref.example: mail-1.ref.example:mail-2.ref.example
+ thes.ref.example: mail-3.ref.example:mail-4.ref.example
+
+This data can be accessed by setting
+
+ route_data = ${lookup{$domain}lsearch{/the/file/name}}
+
+Failure of the lookup results in an empty string, causing the router to
+decline. However, you do not have to use a lookup in %route_data%. The only
+requirement is that the result of expanding the string is a list of hosts,
+possibly followed by options, separated by white space. The list of hosts must
+be enclosed in quotes if it contains white space.
+
+
+
+
+Format of the list of hosts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A list of hosts, whether obtained via %route_data% or %route_list%, is always
+separately expanded before use. If the expansion fails, the router declines.
+The result of the expansion must be a colon-separated list of names and/or
+IP addresses. IP addresses are not enclosed in brackets.
+
+If the list of hosts was obtained from a %route_list% item, the following
+variables are set during its expansion:
+
+- cindex:[numerical variables ($1$ $2$ etc),in ^manualroute^ router]
+If the domain was matched against a regular expression, the numeric variables
+$1$, $2$, etc. may be set.
+
+- $0$ is always set to the entire domain.
+
+- $1$ is also set when partial matching is done in a file lookup.
+
+- cindex:[$value$]
+If the pattern that matched the domain was a lookup item, the data that was
+looked up is available in the expansion variable $value$.
+
+
+
+
+How the list of hosts is used
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+When an address is routed to an ^smtp^ transport by ^manualroute^, each of
+the hosts is tried, in the order specified, when carrying out the SMTP
+delivery. However, the order can be changed by setting the %hosts_randomize%
+option, either on the router (see section <<SECTprioptman>> above), or on the
+transport.
+
+Hosts may be listed by name or by IP address. An unadorned name in the list of
+hosts is interpreted as a host name. A name that is followed by `/MX` is
+interpreted as an indirection to a sublist of hosts obtained by looking up MX
+records in the DNS. For example:
+
+ route_list = * x.y.z:p.q.r/MX:e.f.g
+
+If the %hosts_randomize% option is set, the order of the items in the list is
+randomized before any lookups are done. Exim then scans the list; for any name
+that is not followed by `/MX` it looks up an IP address. If this turns out to
+be an interface on the local host and the item is not the first in the list,
+Exim discards it and any subsequent items. If it is the first item, what
+happens is controlled by the
+cindex:[%self% option,in ^manualroute^ router]
+%self% option of the router.
+
+A name on the list that is followed by `/MX` is replaced with the list of
+hosts obtained by looking up MX records for the name. This is always a DNS
+lookup; the %bydns% and %byname% options (see section <<SECThowoptused>> below)
+are not relevant here. The order of these hosts is determined by the preference
+values in the MX records, according to the usual rules. Because randomizing
+happens before the MX lookup, it does not affect the order that is defined by
+MX preferences.
+
+If the local host is present in the sublist obtained from MX records, but is
+not the most preferred host in that list, it and any equally or less
+preferred hosts are removed before the sublist is inserted into the main list.
+
+If the local host is the most preferred host in the MX list, what happens
+depends on where in the original list of hosts the `/MX` item appears. If it
+is not the first item (that is, there are previous hosts in the main list),
+Exim discards this name and any subsequent items in the main list.
+
+If the MX item is first in the list of hosts, and the local host is the
+most preferred host, what happens is controlled by the %self% option of the
+router.
+
+DNS failures when lookup up the MX records are treated in the same way as DNS
+failures when looking up IP addresses: %pass_on_timeout% and
+%host_find_failed% are used when relevant.
+
+The generic %ignore_target_hosts% option applies to all hosts in the list,
+whether obtained from an MX lookup or not.
+
+
+
+[[SECThowoptused]]
+How the options are used
+~~~~~~~~~~~~~~~~~~~~~~~~
+The options are a sequence of words; in practice no more than three are ever
+present. One of the words can be the name of a transport; this overrides the
+%transport% option on the router for this particular routing rule only. The
+other words (if present) control randomization of the list of hosts on a
+per-rule basis, and how the IP addresses of the hosts are to be found when
+routing to a remote transport. These options are as follows:
+
+- %randomize%: randomize the order of the hosts in this list, overriding the
+setting of %hosts_randomize% for this routing rule only.
+
+- %no_randomize%: do not randomize the order of the hosts in this list,
+overriding the setting of %hosts_randomize% for this routing rule only.
+
+- %byname%: use 'getipnodebyname()' ('gethostbyname()' on older systems) to
+find IP addresses. This function may ultimately cause a DNS lookup, but it may
+also look in _/etc/hosts_ or other sources of information.
+
+- %bydns%: look up address records for the hosts directly in the DNS; fail if
+no address records are found. If there is a temporary DNS error (such as a
+timeout), delivery is deferred.
+
+For example:
+
+....
+route_list = domain1 host1:host2:host3 randomize bydns;\
+ domain2 host4:host5
+....
+
+If neither %byname% nor %bydns% is given, Exim behaves as follows: First, a DNS
+lookup is done. If this yields anything other than HOST_NOT_FOUND, that
+result is used. Otherwise, Exim goes on to try a call to 'getipnodebyname()'
+or 'gethostbyname()', and the result of the lookup is the result of that
+call.
+
+*Warning*: It has been discovered that on some systems, if a DNS lookup
+called via 'getipnodebyname()' times out, HOST_NOT_FOUND is returned
+instead of TRY_AGAIN. That is why the default action is to try a DNS
+lookup first. Only if that gives a definite ``no such host'' is the local
+function called.
+
+
+
+If no IP address for a host can be found, what happens is controlled by the
+%host_find_failed% option.
+
+When an address is routed to a local transport, IP addresses are not looked up.
+The host list is passed to the transport in the $host$ variable.
+
+
+
+Manualroute examples
+~~~~~~~~~~~~~~~~~~~~
+In some of the examples that follow, the presence of the %remote_smtp%
+transport, as defined in the default configuration file, is assumed:
+
+- cindex:[smart host,example router]
+The ^manualroute^ router can be used to forward all external mail to a
+'smart host'. If you have set up, in the main part of the configuration, a
+named domain list that contains your local domains, for example,
+
+ domainlist local_domains = my.domain.example
++
+you can arrange for all other domains to be routed to a smart host by making
+your first router something like this:
++
+ smart_route:
+ driver = manualroute
+ domains = !+local_domains
+ transport = remote_smtp
+ route_list = * smarthost.ref.example
++
+This causes all non-local addresses to be sent to the single host
+'smarthost.ref.example'. If a colon-separated list of smart hosts is given,
+they are tried in order
+(but you can use %hosts_randomize% to vary the order each time).
+Another way of configuring the same thing is this:
++
+ smart_route:
+ driver = manualroute
+ transport = remote_smtp
+ route_list = !+local_domains smarthost.ref.example
++
+There is no difference in behaviour between these two routers as they stand.
+However, they behave differently if %no_more% is added to them. In the first
+example, the router is skipped if the domain does not match the %domains%
+precondition; the following router is always tried. If the router runs, it
+always matches the domain and so can never decline. Therefore, %no_more% would
+have no effect. In the second case, the router is never skipped; it always
+runs. However, if it doesn't match the domain, it declines. In this case
+%no_more% would prevent subsequent routers from running.
+
+- cindex:[mail hub example]
+A 'mail hub' is a host which receives mail for a number of domains via MX
+records in the DNS and delivers it via its own private routing mechanism. Often
+the final destinations are behind a firewall, with the mail hub being the one
+machine that can connect to machines both inside and outside the firewall. The
+^manualroute^ router is usually used on a mail hub to route incoming messages
+to the correct hosts. For a small number of domains, the routing can be inline,
+using the %route_list% option, but for a larger number a file or database
+lookup is easier to manage.
++
+If the domain names are in fact the names of the machines to which the mail is
+to be sent by the mail hub, the configuration can be quite simple. For
+example,
+
+ hub_route:
+ driver = manualroute
+ transport = remote_smtp
+ route_list = *.rhodes.tvs.example $domain
++
+This configuration routes domains that match `*.rhodes.tvs.example` to hosts
+whose names are the same as the mail domains. A similar approach can be taken
+if the host name can be obtained from the domain name by a string manipulation
+that the expansion facilities can handle. Otherwise, a lookup based on the
+domain can be used to find the host:
+
+ through_firewall:
+ driver = manualroute
+ transport = remote_smtp
+ route_data = ${lookup {$domain} cdb {/internal/host/routes}}
++
+The result of the lookup must be the name or IP address of the host (or
+hosts) to which the address is to be routed. If the lookup fails, the route
+data is empty, causing the router to decline. The address then passes to the
+next router.
+
+- cindex:[batched SMTP output example]
+cindex:[SMTP,batched outgoing; example]
+You can use ^manualroute^ to deliver messages to pipes or files in batched
+SMTP format for onward transportation by some other means. This is one way of
+storing mail for a dial-up host when it is not connected. The route list entry
+can be as simple as a single domain name in a configuration like this:
+
+ save_in_file:
+ driver = manualroute
+ transport = batchsmtp_appendfile
+ route_list = saved.domain.example
++
+though often a pattern is used to pick up more than one domain. If there are
+several domains or groups of domains with different transport requirements,
+different transports can be listed in the routing information:
++
+....
+save_in_file:
+ driver = manualroute
+ route_list = \
+ *.saved.domain1.example $domain batch_appendfile; \
+ *.saved.domain2.example \
+ ${lookup{$domain}dbm{/domain2/hosts}{$value}fail} \
+ batch_pipe
+....
++
+The first of these just passes the domain in the $host$ variable, which
+doesn't achieve much (since it is also in $domain$), but the second does a
+file lookup to find a value to pass, causing the router to decline to handle
+the address if the lookup fails.
+
+- cindex:[UUCP,example of router for]
+Routing mail directly to UUCP software is a specific case of the use of
+^manualroute^ in a gateway to another mail environment. This is an example of
+one way it can be done:
++
+....
+# Transport
+uucp:
+ driver = pipe
+ user = nobody
+ command = /usr/local/bin/uux -r - \
+ ${substr_-5:$host}!rmail ${local_part}
+ return_fail_output = true
+
+# Router
+uucphost:
+ transport = uucp
+ driver = manualroute
+ route_data = \
+ ${lookup{$domain}lsearch{/usr/local/exim/uucphosts}}
+....
++
+The file _/usr/local/exim/uucphosts_ contains entries like
+
+ darksite.ethereal.example: darksite.UUCP
++
+It can be set up more simply without adding and removing ``.UUCP'' but this way
+makes clear the distinction between the domain name
+'darksite.ethereal.example' and the UUCP host name 'darksite'.
+
+
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPdriverlast]]
+The queryprogram router
+-----------------------
+cindex:[^queryprogram^ router]
+cindex:[routers,^queryprogram^]
+cindex:[routing,by external program]
+The ^queryprogram^ router routes an address by running an external command and
+acting on its output. This is an expensive way to route, and is intended mainly
+for use in lightly-loaded systems, or for performing experiments. However, if
+it is possible to use the precondition options (%domains%, %local_parts%,
+etc) to skip this router for most addresses, it could sensibly be used in
+special cases, even on a busy host. There are the following private options:
+cindex:[options,^queryprogram^ router]
+
+oindex:[%command%]
+`..'=
+%command%, Use: 'queryprogram', Type: 'string'!!, Default: 'unset'
+===
+
+This option must be set. It specifies the command that is to be run. The
+command is split up into a command name and arguments, and then each is
+expanded separately (exactly as for a ^pipe^ transport, described in chapter
+<<CHAPpipetransport>>).
+
+
+oindex:[%command_group%]
+`..'=
+%command_group%, Use: 'queryprogram', Type: 'string', Default: 'unset'
+===
+
+cindex:[gid (group id),in ^queryprogram^ router]
+This option specifies a gid to be set when running the command. It must be set
+if %command_user% specifies a numerical uid. If it begins with a digit, it is
+interpreted as the numerical value of the gid. Otherwise it is looked up using
+'getgrnam()'.
+
+
+oindex:[%command_user%]
+`..'=
+%command_user%, Use: 'queryprogram', Type: 'string', Default: 'unset'
+===
+
+cindex:[uid (user id),for ^queryprogram^]
+This option must be set. It specifies the uid which is set when running the
+command. If it begins with a digit it is interpreted as the numerical value of
+the uid. Otherwise, it is looked up using 'getpwnam()' to obtain a value for
+the uid and, if %command_group% is not set, a value for the gid also.
+
+
+oindex:[%current_directory%]
+`..'=
+%current_directory%, Use: 'queryprogram', Type: 'string', Default: '/'
+===
+
+This option specifies an absolute path which is made the current directory
+before running the command.
+
+
+oindex:[%timeout%]
+`..'=
+%timeout%, Use: 'queryprogram', Type: 'time', Default: '1h'
+===
+
+If the command does not complete within the timeout period, its process group
+is killed and the message is frozen. A value of zero time specifies no
+timeout.
+
+
+The standard output of the command is connected to a pipe, which is read when
+the command terminates. It should consist of a single line of output,
+containing up to five fields, separated by white space. The maximum length of
+the line is 1023 characters. Longer lines are silently truncated. The first
+field is one of the following words (case-insensitive):
+
+- 'Accept': routing succeeded; the remaining fields specify what to do (see
+below).
+
+- 'Decline': the router declines; pass the address to the next router, unless
+%no_more% is set.
+
+- 'Fail': routing failed; do not pass the address to any more routers. Any
+subsequent text on the line is an error message. If the router is run as part
+of address verification during an incoming SMTP message, the message is
+included in the SMTP response.
+
+- 'Defer': routing could not be completed at this time; try again later. Any
+subsequent text on the line is an error message which is logged. It is not
+included in any SMTP response.
+
+- 'Freeze': the same as 'defer', except that the message is frozen.
+
+- 'Pass': pass the address to the next router (or the router specified by
+%pass_router%), overriding %no_more%.
+
+- 'Redirect': the message is redirected. The remainder of the line is a list of
+new addresses, which are routed independently, starting with the first router,
+or the router specified by %redirect_router%, if set.
+
+When the first word is 'accept', the remainder of the line consists of a
+number of keyed data values, as follows (split into two lines here, to fit on
+the page):
+
+ ACCEPT TRANSPORT=<transport> HOSTS=<list of hosts>
+ LOOKUP=byname|bydns DATA=<text>
+
+The data items can be given in any order, and all are optional. If no transport
+is included, the transport specified by the generic %transport% option is used.
+The list of hosts and the lookup type are needed only if the transport is an
+^smtp^ transport that does not itself supply a list of hosts.
+
+The format of the list of hosts is the same as for the ^manualroute^ router.
+As well as host names and IP addresses, it may contain names followed by
+`/MX` to specify sublists of hosts that are obtained by looking up MX
+records.
+
+If the lookup type is not specified, Exim behaves as follows when trying to
+find an IP address for each host: First, a DNS lookup is done. If this yields
+anything other than HOST_NOT_FOUND, that result is used. Otherwise, Exim
+goes on to try a call to 'getipnodebyname()' or 'gethostbyname()', and the
+result of the lookup is the result of that call.
+
+If the DATA field is set, its value is placed in the $address_data$
+variable. For example, this return line
+
+ accept hosts=x1.y.example:x2.y.example data="rule1"
+
+routes the address to the default transport, passing a list of two hosts. When
+the transport runs, the string ``rule1'' is in $address_data$.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPredirect]]
+The redirect router
+-------------------
+cindex:[^redirect^ router]
+cindex:[routers,^redirect^]
+cindex:[alias file,in a ^redirect^ router]
+cindex:[address redirection,^redirect^ router]
+The ^redirect^ router handles several kinds of address redirection. Its most
+common uses are for resolving local part aliases from a central alias file
+(usually called _/etc/aliases_) and for handling users' personal _.forward_
+files, but it has many other potential uses. The incoming address can be
+redirected in several different ways:
+
+- It can be replaced by one or more new addresses which are themselves routed
+independently.
+
+- It can be routed to be delivered to a given file or directory.
+
+- It can be routed to be delivered to a specified pipe command.
+
+- It can cause an automatic reply to be generated.
+
+- It can be forced to fail, with a custom error message.
+
+- It can be temporarily deferred.
+
+- It can be discarded.
+
+The generic %transport% option must not be set for ^redirect^ routers.
+However, there are some private options which define transports for delivery to
+files and pipes, and for generating autoreplies. See the %file_transport%,
+%pipe_transport% and %reply_transport% descriptions below.
+
+
+
+Redirection data
+~~~~~~~~~~~~~~~~
+The router operates by interpreting a text string which it obtains either by
+expanding the contents of the %data% option, or by reading the entire contents
+of a file whose name is given in the %file% option. These two options are
+mutually exclusive. The first is commonly used for handling system aliases, in
+a configuration like this:
+
+ system_aliases:
+ driver = redirect
+ data = ${lookup{$local_part}lsearch{/etc/aliases}}
+
+If the lookup fails, the expanded string in this example is empty. When the
+expansion of %data% results in an empty string, the router declines. A forced
+expansion failure also causes the router to decline; other expansion failures
+cause delivery to be deferred.
+
+A configuration using %file% is commonly used for handling users' _.forward_
+files, like this:
+
+ userforward:
+ driver = redirect
+ check_local_user
+ file = $home/.forward
+ no_verify
+
+If the file does not exist, or causes no action to be taken (for example, it is
+empty or consists only of comments), the router declines. *Warning*: This
+is not the case when the file contains syntactically valid items that happen to
+yield empty addresses, for example, items containing only RFC 2822 address
+comments.
+
+
+
+Forward files and address verification
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[address redirection,while verifying]
+It is usual to set %no_verify% on ^redirect^ routers which handle users'
+_.forward_ files, as in the example above. There are two reasons for this:
+
+- When Exim is receiving an incoming SMTP message from a remote host, it is
+running under the Exim uid, not as root.
+No additional groups are set up, even if the Exim uid is a member of other
+groups (that is, the 'initgroups()' function is not run).
+Exim is unable to change uid to read the file as the user, and it may not be
+able to read it as the Exim user. So in practice the router may not be able to
+operate.
+
+- However, even when the router can operate, the existence of a _.forward_ file
+is unimportant when verifying an address. What should be checked is whether the
+local part is a valid user name or not. Cutting out the redirection processing
+saves some resources.
+
+
+
+
+
+
+Interpreting redirection data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[Sieve filter,specifying in redirection data]
+cindex:[filter,specifying in redirection data]
+The contents of the data string, whether obtained from %data% or %file%, can be
+interpreted in two different ways:
+
+- If the %allow_filter% option is set true, and the data begins with the text
+``#Exim filter'' or ``#Sieve filter'', it is interpreted as a list of
+'filtering' instructions in the form of an Exim or Sieve filter file,
+respectively. Details of the syntax and semantics of filter files are described
+in a separate document entitled 'Exim's interfaces to mail filtering'; this
+document is intended for use by end users.
+
+- Otherwise, the data must be a comma-separated list of redirection items, as
+described in the next section.
+
+When a message is redirected to a file (a ``mail folder''), the file name given
+in a non-filter redirection list must always be an absolute path. A filter may
+generate a relative path -- how this is handled depends on the transport's
+configuration. See section <<SECTfildiropt>> for a discussion of this issue for
+the ^appendfile^ transport.
+
+
+
+[[SECTitenonfilred]]
+Items in a non-filter redirection list
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[address redirection,non-filter list items]
+When the redirection data is not an Exim or Sieve filter, for example, if it
+comes from a conventional alias or forward file, it consists of a list of
+addresses, file names, pipe commands, or certain special items (see section
+<<SECTspecitredli>> below). The special items can be individually enabled or
+disabled by means of options whose names begin with %allow_% or %forbid_%,
+depending on their default values. The items in the list are separated by
+commas or newlines.
+If a comma is required in an item, the entire item must be enclosed in double
+quotes.
+
+Lines starting with a # character are comments, and are ignored, and # may
+also appear following a comma, in which case everything between the # and the
+next newline character is ignored.
+
+If an item is entirely enclosed in double quotes, these are removed. Otherwise
+double quotes are retained because some forms of mail address require their use
+(but never to enclose the entire address). In the following description, ``item''
+refers to what remains after any surrounding double quotes have been removed.
+
+*Warning*: If you use an Exim expansion to construct a redirection address,
+and the expansion contains a reference to $local_part$, you should make use
+of the %quote% expansion operator, in case the local part contains special
+characters. For example, to redirect all mail for the domain
+'obsolete.example', retaining the existing local part, you could use this
+setting:
+
+ data = ${quote:$local_part}@newdomain.example
+
+
+
+
+[[SECTredlocmai]]
+Redirecting to a local mailbox
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[routing,loops in]
+cindex:[loop while routing, avoidance of]
+cindex:[address redirection,to local mailbox]
+A redirection item may safely be the same as the address currently under
+consideration. This does not cause a routing loop, because a router is
+automatically skipped if any ancestor of the address that is being processed
+is the same as the current address and was processed by the current router.
+Such an address is therefore passed to the following routers, so it is handled
+as if there were no redirection. When making this loop-avoidance test, the
+complete local part, including any prefix or suffix, is used.
+
+cindex:[address redirection,local part without domain]
+Specifying the same local part without a domain is a common usage in personal
+filter files when the user wants to have messages delivered to the local
+mailbox and also forwarded elsewhere. For example, the user whose login is
+'cleo' might have a _.forward_ file containing this:
+
+ cleo, cleopatra@egypt.example
+
+cindex:[backslash in alias file]
+cindex:[alias file,backslash in]
+For compatibility with other MTAs, such unqualified local parts may be
+preceeded by ``\'', but this is not a requirement for loop prevention. However,
+it does make a difference if more than one domain is being handled
+synonymously.
+
+If an item begins with ``\'' and the rest of the item parses as a valid RFC 2822
+address that does not include a domain, the item is qualified using the domain
+of the incoming address. In the absence of a leading ``\'', unqualified
+addresses are qualified using the value in %qualify_recipient%, but you can
+force the incoming domain to be used by setting %qualify_preserve_domain%.
+
+Care must be taken if there are alias names for local users.
+Consider an MTA handling a single local domain where the system alias file
+contains:
+
+ Sam.Reman: spqr
+
+Now suppose that Sam (whose login id is 'spqr') wants to save copies of
+messages in the local mailbox, and also forward copies elsewhere. He creates
+this forward file:
+
+ Sam.Reman, spqr@reme.elsewhere.example
+
+With these settings, an incoming message addressed to 'Sam.Reman' fails. The
+^redirect^ router for system aliases does not process 'Sam.Reman' the
+second time round, because it has previously routed it,
+and the following routers presumably cannot handle the alias. The forward file
+should really contain
+
+ spqr, spqr@reme.elsewhere.example
+
+but because this is such a common error, the %check_ancestor% option (see
+below) exists to provide a way to get round it. This is normally set on a
+^redirect^ router that is handling users' _.forward_ files.
+
+
+
+[[SECTspecitredli]]
+Special items in redirection lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+In addition to addresses, the following types of item may appear in redirection
+lists (that is, in non-filter redirection data):
+
+- cindex:[pipe,in redirection list]
+cindex:[address redirection,to pipe]
+An item is treated as a pipe command if it begins with ``|'' and does not parse
+as a valid RFC 2822 address that includes a domain. A transport for running the
+command must be specified by the %pipe_transport% option.
+Normally, either the router or the transport specifies a user and a group under
+which to run the delivery. The default is to use the Exim user and group.
++
+Single or double quotes can be used for enclosing the individual arguments of
+the pipe command; no interpretation of escapes is done for single quotes. If
+the command contains a comma character, it is necessary to put the whole item
+in double quotes, for example:
+
+ "|/some/command ready,steady,go"
++
+since items in redirection lists are terminated by commas. Do not, however,
+quote just the command. An item such as
+
+ |"/some/command ready,steady,go"
++
+is interpreted as a pipe with a rather strange command name, and no arguments.
+
+- cindex:[file,in redirection list]
+cindex:[address redirection,to file]
+An item is interpreted as a path name if it begins with ``/'' and does not parse
+as a valid RFC 2822 address that includes a domain. For example,
+
+ /home/world/minbari
++
+is treated as a file name, but
+
+ /s=molari/o=babylon/@x400gate.way
++
+is treated as an address. For a file name, a transport must be specified using
+the %file_transport% option. However, if the generated path name ends with a
+forward slash character, it is interpreted as a directory name rather than a
+file name, and %directory_transport% is used instead.
++
+Normally, either the router or the transport specifies a user and a group under
+which to run the delivery. The default is to use the Exim user and group.
++
+cindex:[_/dev/null_]
+However, if a redirection item is the path _/dev/null_, delivery to it is
+bypassed at a high level, and the log entry shows ``\*\*bypassed\*\*''
+instead of a transport name. In this case the user and group are not used.
+
+- cindex:[included address list]
+cindex:[address redirection,included external list]
+If an item is of the form
+
+ :include:<path name>
++
+a list of further items is taken from the given file and included at that
+point. *Note*: such a file can not be a filter file; it is just an out-of-line
+addition to the list. The items in the included list are separated by commas or
+newlines and are not subject to expansion. If this is the first item in an
+alias list in an ^lsearch^ file, a colon must be used to terminate the alias
+name. This example is incorrect:
+
+ list1 :include:/opt/lists/list1
++
+It must be given as
+
+ list1: :include:/opt/lists/list1
++
+- cindex:[address redirection,to black hole]
+Sometimes you want to throw away mail to a particular local part. Making the
+%data% option expand to an empty string does not work, because that causes the
+router to decline. Instead, the alias item
+cindex:[black hole]
+cindex:[abandoning mail]
+
+ :blackhole:
++
+can be used. It does what its name implies. No delivery is done, and no error
+message is generated. This has the same effect as specifing _/dev/null_, but
+can be independently disabled.
++
+*Warning*: If `:blackhole:` appears anywhere in a redirection list, no
+delivery is done for the original local part, even if other redirection items
+are present. If you are generating a multi-item list (for example, by reading a
+database) and need the ability to provide a no-op item, you must use
+_/dev/null_.
+
+- cindex:[delivery,forcing failure]
+cindex:[delivery,forcing deferral]
+cindex:[failing delivery,forcing]
+cindex:[deferred delivery, forcing]
+cindex:[customizing,failure message]
+An attempt to deliver a particular address can be deferred or forced to fail by
+redirection items of the form
+
+ :defer:
+ :fail:
++
+respectively. When a redirection list contains such an item, it applies to the
+entire redirection; any other items in the list are ignored (':blackhole:' is
+different). Any text following ':fail:' or ':defer:' is placed in the error
+text associated with the failure. For example, an alias file might contain:
+
+ X.Employee: :fail: Gone away, no forwarding address
++
+In the case of an address that is being verified from an ACL or as the subject
+of a
+cindex:[VRFY error text, display of]
+VRFY command, the text is included in the SMTP error response by
+default.
+cindex:[EXPN error text, display of]
+The text is not included in the response to an EXPN command.
++
+In an ACL, an explicitly provided message overrides the default, but the
+default message is available in the variable $acl_verify_message$ and can
+therefore be included in a custom message if this is desired. Exim sends a 451
+SMTP code for a ':defer:', and 550 for ':fail:'. In non-SMTP cases the text
+is included in the error message that Exim generates.
++
+Normally the error text is the rest of the redirection list -- a comma does not
+terminate it -- but a newline does act as a terminator. Newlines are not
+normally present in alias expansions. In ^lsearch^ lookups they are removed as
+part of the continuation process, but they may exist in other kinds of lookup
+and in ':include:' files.
++
+During routing for message delivery (as opposed to verification), a redirection
+containing ':fail:' causes an immediate failure of the incoming address,
+whereas ':defer:' causes the message to remain on the queue so that a
+subsequent delivery attempt can happen at a later time. If an address is
+deferred for too long, it will ultimately fail, because the normal retry
+rules still apply.
+
+- cindex:[alias file,exception to default]
+Sometimes it is useful to use a single-key search type with a default (see
+chapter <<CHAPfdlookup>>) to look up aliases. However, there may be a need for
+exceptions to the default. These can be handled by aliasing them to
+
+ :unknown:
++
+This differs from ':fail:' in that it causes the ^redirect^ router to decline,
+whereas ':fail:' forces routing to fail. A lookup which results in an empty
+redirection list has the same effect.
+
+
+
+Duplicate addresses
+~~~~~~~~~~~~~~~~~~~
+cindex:[duplicate addresses]
+cindex:[address duplicate, discarding]
+cindex:[pipe,duplicated]
+Exim removes duplicate addresses from the list to which it is delivering, so as
+to deliver just one copy to each address. This does not apply to deliveries
+routed to pipes by different immediate parent addresses, but an indirect
+aliasing scheme of the type
+
+ pipe: |/some/command $local_part
+ localpart1: pipe
+ localpart2: pipe
+
+does not work with a message that is addressed to both local parts, because
+when the second is aliased to the intermediate local part ``pipe'' it gets
+discarded as being the same as a previously handled address. However, a scheme
+such as
+
+ localpart1: |/some/command $local_part
+ localpart2: |/some/command $local_part
+
+does result in two different pipe deliveries, because the immediate parents of
+the pipes are distinct.
+
+
+
+Repeated redirection expansion
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[repeated redirection expansion]
+cindex:[address redirection,repeated for each delivery attempt]
+When a message cannot be delivered to all of its recipients immediately,
+leading to two or more delivery attempts, redirection expansion is carried out
+afresh each time for those addresses whose children were not all previously
+delivered. If redirection is being used as a mailing list, this can lead to new
+members of the list receiving copies of old messages. The %one_time% option
+can be used to avoid this.
+
+
+Errors in redirection lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[address redirection,errors]
+If %skip_syntax_errors% is set, a malformed address that causes a parsing
+error is skipped, and an entry is written to the main log. This may be useful
+for mailing lists that are automatically managed. Otherwise, if an error is
+detected while generating the list of new addresses, the original address is
+deferred. See also %syntax_errors_to%.
+
+
+
+Private options for the redirect router
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+cindex:[options,^redirect^ router]
+The private options for the ^redirect^ router are as follows:
+
+
+oindex:[%allow_defer%]
+`..'=
+%allow_defer%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+Setting this option allows the use of ':defer:' in non-filter redirection
+data,
+or the %defer% command in an Exim filter file.
+
+
+oindex:[%allow_fail%]
+`..'=
+%allow_fail%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[failing delivery,from filter]
+If this option is true, the ':fail:' item can be used in a redirection list,
+and the %fail% command may be used in a filter file.
+
+
+oindex:[%allow_filter%]
+`..'=
+%allow_filter%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[filter,enabling use of]
+cindex:[Sieve filter,enabling use of]
+Setting this option allows Exim to interpret redirection data that starts with
+``#Exim filter'' or ``#Sieve filter'' as a set of filtering instructions. There
+are some features of Exim filter files that some administrators may wish to
+lock out; see the %forbid_filter_xxx% options below.
+
+It is also possible to lock out Exim filters or Sieve filters while allowing
+the other type; see %forbid_exim_filter% and %forbid_sieve_filter%.
+
+
+The filter is run using the uid and gid set by the generic %user% and %group%
+options. These take their defaults from the password data if
+%check_local_user% is set, so in the normal case of users' personal filter
+files, the filter is run as the relevant user. When %allow_filter% is set
+true, Exim insists that either %check_local_user% or %user% is set.
+
+
+
+oindex:[%allow_freeze%]
+`..'=
+%allow_freeze%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[freezing messages,allowing in filter]
+Setting this option allows the use of the %freeze% command in an Exim filter.
+This command is more normally encountered in system filters, and is disabled by
+default for redirection filters because it isn't something you usually want to
+let ordinary users do.
+
+
+
+oindex:[%check_ancestor%]
+`..'=
+%check_ancestor%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+This option is concerned with handling generated addresses that are the same
+as some address in the list of redirection ancestors of the current address.
+Although it is turned off by default in the code, it is set in the default
+configuration file for handling users' _.forward_ files. It is recommended
+for this use of the ^redirect^ router.
+
+When %check_ancestor% is set, if a generated address (including the domain) is
+the same as any ancestor of the current address, it is replaced by a copy of
+the current address. This helps in the case where local part A is aliased to B,
+and B has a _.forward_ file pointing back to A. For example, within a single
+domain, the local part ``Joe.Bloggs'' is aliased to ``jb'' and _~jb/.forward_
+contains:
+
+ \Joe.Bloggs, <other item(s)>
+
+Without the %check_ancestor% setting, either local part (``jb'' or ``joe.bloggs'')
+gets processed once by each router and so ends up as it was originally. If ``jb''
+is the real mailbox name, mail to ``jb'' gets delivered (having been turned into
+``joe.bloggs'' by the _.forward_ file and back to ``jb'' by the alias), but mail
+to ``joe.bloggs'' fails. Setting %check_ancestor% on the ^redirect^ router that
+handles the _.forward_ file prevents it from turning ``jb'' back into
+``joe.bloggs'' when that was the original address. See also the %repeat_use%
+option below.
+
+
+oindex:[%check_group%]
+`..'=
+%check_group%, Use: 'redirect', Type: 'boolean', Default: 'see below'
+===
+
+When the %file% option is used, the group owner of the file is checked only
+when this option is set. The permitted groups are those listed in the
+%owngroups% option, together with the user's default group if
+%check_local_user% is set. If the file has the wrong group, routing is
+deferred. The default setting for this option is true if %check_local_user%
+is set and the %modemask% option permits the group write bit, or if the
+%owngroups% option is set. Otherwise it is false, and no group check occurs.
+
+
+
+oindex:[%check_owner%]
+`..'=
+%check_owner%, Use: 'redirect', Type: 'boolean', Default: 'see below'
+===
+
+When the %file% option is used, the owner of the file is checked only when this
+option is set. If %check_local_user% is set, the local user is permitted;
+otherwise the owner must be one of those listed in the %owners% option. The
+default value for this option is true if %check_local_user% or %owners% is
+set. Otherwise the default is false, and no owner check occurs.
+
+
+oindex:[%data%]
+`..'=
+%data%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+This option is mutually exclusive with %file%. One or other of them must be
+set, but not both. The contents of %data% are expanded, and then used as the
+list of forwarding items, or as a set of filtering instructions. If the
+expansion is forced to fail, or the result is an empty string or a string that
+has no effect (consists entirely of comments), the router declines.
+
+When filtering instructions are used, the string must begin with ``#Exim
+filter'', and all comments in the string, including this initial one, must be
+terminated with newline characters. For example:
+
+....
+data = #Exim filter\n\
+ if $h_to: contains Exim then save $home/mail/exim endif
+....
+
+If you are reading the data from a database where newlines cannot be included,
+you can use the $\{sg\}$ expansion item to turn the escape string of your
+choice into a newline.
+
+
+oindex:[%directory_transport%]
+`..'=
+%directory_transport%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+A ^redirect^ router sets up a direct delivery to a directory when a path name
+ending with a slash is specified as a new ``address''. The transport used is
+specified by this option, which, after expansion, must be the name of a
+configured transport. This should normally be an ^appendfile^ transport.
+
+
+oindex:[%file%]
+`..'=
+%file%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+This option specifies the name of a file that contains the redirection data. It
+is mutually exclusive with the %data% option. The string is expanded before
+use; if the expansion is forced to fail, the router declines. Other expansion
+failures cause delivery to be deferred. The result of a successful expansion
+must be an absolute path. The entire file is read and used as the redirection
+data. If the data is an empty string or a string that has no effect (consists
+entirely of comments), the router declines.
+
+cindex:[NFS,checking for file existence]
+If the attempt to open the file fails with a ``does not exist'' error, Exim
+runs a check on the containing directory,
+unless %ignore_enotdir% is true (see below).
+If the directory does not appear to exist, delivery is deferred. This can
+happen when users' _.forward_ files are in NFS-mounted directories, and there
+is a mount problem. If the containing directory does exist, but the file does
+not, the router declines.
+
+
+oindex:[%file_transport%]
+`..'=
+%file_transport%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+A ^redirect^ router sets up a direct delivery to a file when a path name not
+ending in a slash is specified as a new ``address''. The transport used is
+specified by this option, which, after expansion, must be the name of a
+configured transport.
+This should normally be an ^appendfile^ transport.
+When it is running, the file name is in $address_file$.
+
+
+oindex:[%forbid_blackhole%]
+`..'=
+%forbid_blackhole%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, the ':blackhole:' item may not appear in a redirection
+list.
+
+
+oindex:[%forbid_exim_filter%]
+`..'=
+%forbid_exim_filter%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is set true, only Sieve filters are permitted when
+%allow_filter% is true.
+
+
+
+
+oindex:[%forbid_file%]
+`..'=
+%forbid_file%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[delivery,to file; forbidding]
+cindex:[Sieve filter,forbidding delivery to a file]
+cindex:[Sieve filter,``keep'' facility; disabling]
+If this option is true, this router may not generate a new address that
+specifies delivery to a local file or directory, either from a filter or from a
+conventional forward file. This option is forced to be true if %one_time% is
+set. It applies to Sieve filters as well as to Exim filters, but if true, it
+locks out the Sieve's ``keep'' facility.
+
+
+oindex:[%forbid_filter_existstest%]
+`..'=
+%forbid_filter_existstest%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[filter,locking out certain features]
+If this option is true, string expansions in Exim filters are not allowed to
+make use of the %exists% condition.
+
+
+oindex:[%forbid_filter_logwrite%]
+`..'=
+%forbid_filter_logwrite%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, use of the logging facility in Exim filters is not
+permitted. Logging is in any case available only if the filter is being run
+under some unprivileged uid (which is normally the case for ordinary users'
+_.forward_ files).
+
+
+oindex:[%forbid_filter_lookup%]
+`..'=
+%forbid_filter_lookup%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of %lookup% items.
+
+
+oindex:[%forbid_filter_perl%]
+`..'=
+%forbid_filter_perl%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+This option is available only if Exim is built with embedded Perl support. If
+it is true, string expansions in Exim filter files are not allowed to make use
+of the embedded Perl support.
+
+
+oindex:[%forbid_filter_readfile%]
+`..'=
+%forbid_filter_readfile%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of %readfile% items.
+
+
+oindex:[%forbid_filter_readsocket%]
+`..'=
+%forbid_filter_readsocket%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of %readsocket% items.
+
+
+oindex:[%forbid_filter_reply%]
+`..'=
+%forbid_filter_reply%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, this router may not generate an automatic reply
+message. Automatic replies can be generated only from Exim
+
+or Sieve filter files, not from traditional forward files.
+
+This option is forced to be true if %one_time% is set.
+
+
+oindex:[%forbid_filter_run%]
+`..'=
+%forbid_filter_run%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of %run% items.
+
+
+oindex:[%forbid_include%]
+`..'=
+%forbid_include%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, items of the form
+
+ :include:<path name>
+
+are not permitted in non-filter redirection lists.
+
+
+oindex:[%forbid_pipe%]
+`..'=
+%forbid_pipe%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[delivery,to pipe; forbidding]
+If this option is true, this router may not generate a new address which
+specifies delivery to a pipe, either from an Exim filter or from a conventional
+forward file. This option is forced to be true if %one_time% is set.
+
+
+oindex:[%forbid_sieve_filter%]
+`..'=
+%forbid_sieve_filter%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+If this option is set true, only Exim filters are permitted when
+%allow_filter% is true.
+
+
+
+
+oindex:[%hide_child_in_errmsg%]
+`..'=
+%hide_child_in_errmsg%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[bounce message,redirection details; suppressing]
+If this option is true, it prevents Exim from quoting a child address if it
+generates a bounce or delay message for it. Instead it says ``an address
+generated from <''the top level address'>'. Of course, this applies only to
+bounces generated locally. If a message is forwarded to another host, 'its'
+bounce may well quote the generated address.
+
+
+oindex:[%ignore_eacces%]
+`..'=
+%ignore_eacces%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[EACCES]
+If this option is set and an attempt to open a redirection file yields the
+EACCES error (permission denied), the ^redirect^ router behaves as if the
+file did not exist.
+
+
+oindex:[%ignore_enotdir%]
+`..'=
+%ignore_enotdir%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[ENOTDIR]
+If this option is set and an attempt to open a redirection file yields the
+ENOTDIR error (something on the path is not a directory), the ^redirect^
+router behaves as if the file did not exist.
+
+Setting %ignore_enotdir% has another effect as well: When a ^redirect^
+router that has the %file% option set discovers that the file does not exist
+(the ENOENT error), it tries to 'stat()' the parent directory, as a check
+against unmounted NFS directories. If the parent can not be statted, delivery
+is deferred. However, it seems wrong to do this check when %ignore_enotdir% is
+set, because that option tells Exim to ignore ``something on the path is not a
+directory'' (the ENOTDIR error). This is a confusing area, because it seems
+that some operating systems give ENOENT where others give ENOTDIR.
+
+
+
+oindex:[%include_directory%]
+`..'=
+%include_directory%, Use: 'redirect', Type: 'string', Default: 'unset'
+===
+
+If this option is set, the path names of any ':include:' items in a redirection
+list must start with this directory.
+
+
+oindex:[%modemask%]
+`..'=
+%modemask%, Use: 'redirect', Type: 'octal integer', Default: '022'
+===
+
+This specifies mode bits which must not be set for a file specified by the
+%file% option. If any of the forbidden bits are set, delivery is deferred.
+
+
+oindex:[%one_time%]
+`..'=
+%one_time%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[one-time aliasing/forwarding expansion]
+cindex:[alias file,one-time expansion]
+cindex:[forward file,one-time expansion]
+cindex:[mailing lists,one-time expansion]
+cindex:[address redirection,one-time expansion]
+Sometimes the fact that Exim re-evaluates aliases and reprocesses redirection
+files each time it tries to deliver a message causes a problem
+when one or more of the generated addresses fails be delivered at the first
+attempt. The problem is not one of duplicate delivery -- Exim is clever enough
+to handle that -- but of what happens when the redirection list changes during
+the time that the message is on Exim's queue. This is particularly true in the
+case of mailing lists, where new subscribers might receive copies of messages
+that were posted before they subscribed.
+
+If %one_time% is set and any addresses generated by the router fail to
+deliver at the first attempt, the failing addresses are added to the message as
+``top level'' addresses, and the parent address that generated them is marked
+``delivered''. Thus, redirection does not happen again at the next
+delivery attempt.
+
+*Warning 1*: This means that any header line addition or removal that is
+specified by this router would be lost if delivery did not succeed at the
+first attempt. For this reason, the %headers_add% and %headers_remove%
+generic options are not permitted when %one_time% is set.
+
+*Warning 2*: To ensure that the router generates only addresses (as opposed
+to pipe or file deliveries or auto-replies) %forbid_file%, %forbid_pipe%,
+and %forbid_filter_reply% are forced to be true when %one_time% is set.
+
+The original top-level address is remembered with each of the generated
+addresses, and is output in any log messages. However, any intermediate parent
+addresses are not recorded. This makes a difference to the log only if
+%all_parents% log selector is set. It is expected that %one_time% will
+typically be used for mailing lists, where there is normally just one level of
+expansion.
+
+
+oindex:[%owners%]
+`..'=
+%owners%, Use: 'redirect', Type: 'string list', Default: 'unset'
+===
+
+cindex:[ownership,alias file]
+cindex:[ownership,forward file]
+cindex:[alias file,ownership]
+cindex:[forward file,ownership]
+This specifies a list of permitted owners for the file specified by %file%.
+This list is in addition to the local user when %check_local_user% is set.
+See %check_owner% above.
+
+
+oindex:[%owngroups%]
+`..'=
+%owngroups%, Use: 'redirect', Type: 'string list', Default: 'unset'
+===
+
+This specifies a list of permitted groups for the file specified by %file%. The
+list is in addition to the local user's primary group when %check_local_user%
+is set. See %check_group% above.
+
+
+oindex:[%pipe_transport%]
+`..'=
+%pipe_transport%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+A ^redirect^ router sets up a direct delivery to a pipe when a string starting
+with a vertical bar character is specified as a new ``address''. The transport
+used is specified by this option, which, after expansion, must be the name of a
+configured transport.
+This should normally be a ^pipe^ transport.
+When the transport is run, the pipe command is in $address_pipe$.
+
+
+oindex:[%qualify_domain%]
+`..'=
+%qualify_domain%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+If this option is set and an unqualified address (one without a domain) is
+generated, it is qualified with the domain specified by expanding this string,
+instead of the global setting in %qualify_recipient%. If the expansion fails,
+the router declines. If you want to revert to the default, you can have the
+expansion generate $qualify_recipient$.
+
+
+oindex:[%qualify_preserve_domain%]
+`..'=
+%qualify_preserve_domain%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[domain,in redirection; preserving]
+cindex:[preserving domain in redirection]
+cindex:[address redirection,domain; preserving]
+If this is set and an unqualified address (one without a domain) is generated,
+it is qualified with the domain of the
+parent address (the immediately preceding ancestor) instead of the local
+%qualify_domain% or global %qualify_recipient% value.
+
+
+oindex:[%repeat_use%]
+`..'=
+%repeat_use%, Use: 'redirect', Type: 'boolean', Default: 'true'
+===
+
+If this option is set false, the router is skipped for a child address that has
+any ancestor that was routed by this router. This test happens before any of
+the other preconditions are tested. Exim's default anti-looping rules skip
+only when the ancestor is the same as the current address. See also
+%check_ancestor% above and the generic %redirect_router% option.
+
+
+oindex:[%reply_transport%]
+`..'=
+%reply_transport%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+A ^redirect^ router sets up an automatic reply when a %mail% or %vacation%
+command is used in a filter file. The transport used is specified by this
+option, which, after expansion, must be the name of a configured transport.
+This should normally be an ^autoreply^ transport. Other transports are
+unlikely to do anything sensible or useful.
+
+
+oindex:[%rewrite%]
+`..'=
+%rewrite%, Use: 'redirect', Type: 'boolean', Default: 'true'
+===
+
+cindex:[address redirection,disabling rewriting]
+If this option is set false, addresses generated by the router are not
+subject to address rewriting. Otherwise, they are treated like new addresses
+and are rewritten according to the global rewriting rules.
+
+
+
+oindex:[%sieve_vacation_directory%]
+`..'=
+%sieve_vacation_directory%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[Sieve filter,vacation directory]
+To enable the ``vacation'' extension for Sieve filters, you must set
+%sieve_vacation_directory% to the directory where vacation databases are held
+(do not put anything else in that directory), and ensure that the
+%reply_transport% option refers to an ^autoreply^ transport.
+
+
+
+
+oindex:[%skip_syntax_errors%]
+`..'=
+%skip_syntax_errors%, Use: 'redirect', Type: 'boolean', Default: 'false'
+===
+
+cindex:[forward file,broken]
+cindex:[address redirection,broken files]
+cindex:[alias file,broken]
+cindex:[broken alias or forward files]
+cindex:[ignoring faulty addresses]
+cindex:[skipping faulty addresses]
+cindex:[error,skipping bad syntax]
+If %skip_syntax_errors% is set, syntactically malformed addresses in
+non-filter redirection data are skipped, and each failing address is logged. If
+%syntax_errors_to% is set, a message is sent to the address it defines,
+giving details of the failures. If %syntax_errors_text% is set, its contents
+are expanded and placed at the head of the error message generated by
+%syntax_errors_to%. Usually it is appropriate to set %syntax_errors_to% to
+be the same address as the generic %errors_to% option. The
+%skip_syntax_errors% option is often used when handling mailing lists.
+
+If all the addresses in a redirection list are skipped because of syntax
+errors, the router declines to handle the original address, and it is passed to
+the following routers.
+
+If %skip_syntax_errors% is set when an Exim filter is interpreted, any syntax
+error in the filter causes filtering to be abandoned without any action being
+taken. The incident is logged, and the router declines to handle the address,
+so it is passed to the following routers.
+
+cindex:[Sieve filter,syntax errors in]
+Syntax errors in a Sieve filter file cause the ``keep'' action to occur. This
+action is specified by RFC 3028. The values of %skip_syntax_errors%,
+%syntax_errors_to%, and %syntax_errors_text% are not used.
+
+%skip_syntax_errors% can be used to specify that errors in users' forward
+lists or filter files should not prevent delivery. The %syntax_errors_to%
+option, used with an address that does not get redirected, can be used to
+notify users of these errors, by means of a router like this:
+
+....
+userforward:
+ driver = redirect
+ allow_filter
+ check_local_user
+ file = $home/.forward
+ file_transport = address_file
+ pipe_transport = address_pipe
+ reply_transport = address_reply
+ no_verify
+ skip_syntax_errors
+ syntax_errors_to = real-$local_part\$domain
+ syntax_errors_text = \
+ This is an automatically generated message. An error has\n\
+ been found in your .forward file. Details of the error are\n\
+ reported below. While this error persists, you will receive\n\
+ a copy of this message for every message that is addressed\n\
+ to you. If your .forward file is a filter file, or if it is\n\
+ a non-filter file containing no valid forwarding addresses,\n\
+ a copy of each incoming message will be put in your normal\n\
+ mailbox. If a non-filter file contains at least one valid\n\
+ forwarding address, forwarding to the valid addresses will\n\
+ happen, and those will be the only deliveries that occur.
+....
+
+You also need a router to ensure that local addresses that are prefixed by
+`real-` are recognized, but not forwarded or filtered. For example, you could
+put this immediately before the ^userforward^ router:
+
+ real_localuser:
+ driver = accept
+ check_local_user
+ local_part_prefix = real-
+ transport = local_delivery
+
+
+
+oindex:[%syntax_errors_text%]
+`..'=
+%syntax_errors_text%, Use: 'redirect', Type: 'string'!!, Default: 'unset'
+===
+
+See %skip_syntax_errors% above.
+
+
+oindex:[%syntax_errors_to%]
+`..'=
+%syntax_errors_to%, Use: 'redirect', Type: 'string', Default: 'unset'
+===
+
+See %skip_syntax_errors% above.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPenvironment]]
+[titleabbrev="Environment for local transports"]
+Environment for running local transports
+----------------------------------------
+cindex:[local transports,environment for]
+cindex:[environment for local transports]
+cindex:[transport,local; environment for]
+Local transports handle deliveries to files and pipes. (The ^autoreply^
+transport can be thought of as similar to a pipe.) Exim always runs transports
+in subprocesses, under specified uids and gids. Typical deliveries to local
+mailboxes run under the uid and gid of the local user.
+
+Exim also sets a specific current directory while running the transport; for
+some transports a home directory setting is also relevant. The ^pipe^
+transport is the only one that sets up environment variables; see section
+<<SECTpipeenv>> for details.
+
+The values used for the uid, gid, and the directories may come from several
+different places. In many cases, the router that handles the address associates
+settings with that address as a result of its %check_local_user%, %group%, or
+%user% options. However, values may also be given in the transport's own
+configuration, and these override anything that comes from the router.
+
+
+
+Concurrent deliveries
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[concurrent deliveries]
+cindex:[simultaneous deliveries]
+If two different messages for the same local recpient arrive more or less
+simultaneously, the two delivery processes are likely to run concurrently. When
+the ^appendfile^ transport is used to write to a file, Exim applies locking
+rules to stop concurrent processes from writing to the same file at the same
+time.
+
+However, when you use a ^pipe^ transport, it is up to you to arrange any
+locking that is needed. Here is a silly example:
+
+ my_transport:
+ driver = pipe
+ command = /bin/sh -c 'cat >>/some/file'
+
+This is supposed to write the message at the end of the file. However, if two
+messages arrive at the same time, the file will be scrambled. You can use the
+%exim_lock% utility program (see section <<SECTmailboxmaint>>) to lock a file
+using the same algorithm that Exim itself uses.
+
+
+
+
+[[SECTenvuidgid]]
+Uids and gids
+~~~~~~~~~~~~~
+cindex:[local transports,uid and gid]
+cindex:[transport,local; uid and gid]
+All transports have the options %group% and %user%. If %group% is set, it
+overrides any group that the router set in the address, even if %user% is not
+set for the transport. This makes it possible, for example, to run local mail
+delivery under the uid of the recipient (set by the router), but in a special
+group (set by the transport). For example:
+
+ # Routers ...
+ # User/group are set by check_local_user in this router
+ local_users:
+ driver = accept
+ check_local_user
+ transport = group_delivery
+
+ # Transports ...
+ # This transport overrides the group
+ group_delivery:
+ driver = appendfile
+ file = /var/spool/mail/$local_part
+ group = mail
+
+If %user% is set for a transport, its value overrides what is set in the
+address. If %user% is non-numeric and %group% is not set, the gid associated
+with the user is used. If %user% is numeric, %group% must be set.
+
+cindex:[%initgroups% option]
+When the uid is taken from the transport's configuration, the 'initgroups()'
+function is called for the groups associated with that uid if the %initgroups%
+option is set for the transport. When the uid is not specified by the
+transport, but is associated with the address by a router, the option for
+calling 'initgroups()' is taken from the router configuration.
+
+cindex:[^pipe^ transport,uid for]
+The ^pipe^ transport contains the special option %pipe_as_creator%. If this
+is set and %user% is not set, the uid of the process that called Exim to
+receive the message is used, and if %group% is not set, the corresponding
+original gid is also used.
+
+
+
+Current and home directories
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[current directory for local transport]
+cindex:[home directory,for local transport]
+cindex:[transport,local; home directory for]
+cindex:[transport,local; current directory for]
+Routers may set current and home directories for local transports by means of
+the %transport_current_directory% and %transport_home_directory% options.
+However, if the transport's %current_directory% or %home_directory% options
+are set, they override the router's values. In detail, the home directory
+for a local transport is taken from the first of these values that is set:
+
+- The %home_directory% option on the transport;
+
+- The %transport_home_directory% option on the router;
+
+- The password data if %check_local_user% is set on the router;
+
+- The %router_home_directory% option on the router.
+
+The current directory is taken from the first of these values that is set:
+
+- The %current_directory% option on the transport;
+
+- The %transport_current_directory% option on the router.
+
+
+If neither the router nor the transport sets a current directory, Exim uses the
+value of the home directory, if it is set. Otherwise it sets the current
+directory to _/_ before running a local transport.
+
+
+
+Expansion variables derived from the address
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Normally a local delivery is handling a single address, and in that case the
+variables such as $domain$ and $local_part$ are set during local
+deliveries. However, in some circumstances more than one address may be handled
+at once (for example, while writing batch SMTP for onward transmission by some
+other means). In this case, the variables associated with the local part are
+never set, $domain$ is set only if all the addresses have the same
+domain, and $original_domain$ is never set.
+
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPtransportgeneric]]
+Generic options for transports
+------------------------------
+
+cindex:[generic options,transport]
+cindex:[options,generic; for transports]
+cindex:[transport,generic options for]
+The following generic options apply to all transports:
+
+
+oindex:[%body_only%]
+`..'=
+%body_only%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:[transport,body only]
+cindex:[message,transporting body only]
+cindex:[body of message,transporting]
+If this option is set, the message's headers are not transported. It is
+mutually exclusive with %headers_only%. If it is used with the ^appendfile^ or
+^pipe^ transports, the settings of %message_prefix% and %message_suffix%
+should be checked, because this option does not automatically suppress them.
+
+
+oindex:[%current_directory%]
+`..'=
+%current_directory%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[transport,current directory for]
+This specifies the current directory that is to be set while running the
+transport, overriding any value that may have been set by the router.
+If the expansion fails for any reason, including forced failure, an error is
+logged, and delivery is deferred.
+
+
+oindex:[%disable_logging%]
+`..'=
+%disable_logging%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+If this option is set true, nothing is logged for any
+deliveries by the transport or for any
+transport errors. You should not set this option unless you really, really know
+what you are doing.
+
+
+oindex:[%debug_print%]
+`..'=
+%debug_print%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[testing,variables in drivers]
+If this option is set and debugging is enabled (see the %-d% command line
+option), the string is expanded and included in the debugging output when the
+transport is run.
+If expansion of the string fails, the error message is written to the debugging
+output, and Exim carries on processing.
+This facility is provided to help with checking out the values of variables and
+so on when debugging driver configurations. For example, if a %headers_add%
+option is not working properly, %debug_print% could be used to output the
+variables it references. A newline is added to the text if it does not end with
+one.
+
+
+oindex:[%delivery_date_add%]
+`..'=
+%delivery_date_add%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:['Delivery-date:' header line]
+If this option is true, a 'Delivery-date:' header is added to the message. This
+gives the actual time the delivery was made. As this is not a standard header,
+Exim has a configuration option (%delivery_date_remove%) which requests its
+removal from incoming messages, so that delivered messages can safely be resent
+to other recipients.
+
+
+oindex:[%driver%]
+`..'=
+%driver%, Use: 'transports', Type: 'string', Default: 'unset'
+===
+
+This specifies which of the available transport drivers is to be used.
+There is no default, and this option must be set for every transport.
+
+
+oindex:[%envelope_to_add%]
+`..'=
+%envelope_to_add%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:['Envelope-to:' header line]
+If this option is true, an 'Envelope-to:' header is added to the message. This
+gives the original address(es) in the incoming envelope that caused this
+delivery to happen. More than one address may be present if the transport is
+configured to handle several addresses at once, or if more than one original
+address was redirected to the same final address. As this is not a standard
+header, Exim has a configuration option (%envelope_to_remove%) which requests
+its removal from incoming messages, so that delivered messages can safely be
+resent to other recipients.
+
+
+oindex:[%group%]
+`..'=
+%group%, Use: 'transports', Type: 'string'!!, Default: 'Exim group'
+===
+
+cindex:[transport,group; specifying]
+This option specifies a gid for running the transport process, overriding any
+value that the router supplies, and also overriding any value associated with
+%user% (see below).
+
+
+oindex:[%headers_add%]
+`..'=
+%headers_add%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[header lines,adding in transport]
+cindex:[transport,header lines; adding]
+This option specifies a string of text that is expanded and added to the header
+portion of a message as it is transported, as described in section
+<<SECTheadersaddrem>>. Additional header lines can also be specified by routers.
+If the result of the expansion is an empty string, or if the expansion is
+forced to fail, no action is taken. Other expansion failures are treated as
+errors and cause the delivery to be deferred.
+
+
+
+oindex:[%headers_only%]
+`..'=
+%headers_only%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:[transport,header lines only]
+cindex:[message,transporting headers only]
+cindex:[header lines,transporting]
+If this option is set, the message's body is not transported. It is mutually
+exclusive with %body_only%. If it is used with the ^appendfile^ or ^pipe^
+transports, the settings of %message_prefix% and %message_suffix% should be
+checked, since this option does not automatically suppress them.
+
+
+oindex:[%headers_remove%]
+`..'=
+%headers_remove%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[header lines,removing]
+cindex:[transport,header lines; removing]
+This option specifies a string that is expanded into a list of header names;
+these headers are omitted from the message as it is transported, as described
+in section <<SECTheadersaddrem>>. Header removal can also be specified by
+routers. If the result of the expansion is an empty string, or if the expansion
+is forced to fail, no action is taken. Other expansion failures are treated as
+errors and cause the delivery to be deferred.
+
+
+
+oindex:[%headers_rewrite%]
+`..'=
+%headers_rewrite%, Use: 'transports', Type: 'string', Default: 'unset'
+===
+
+cindex:[transport,header lines; rewriting]
+cindex:[rewriting,at transport time]
+This option allows addresses in header lines to be rewritten at transport time,
+that is, as the message is being copied to its destination. The contents of the
+option are a colon-separated list of rewriting rules. Each rule is in exactly
+the same form as one of the general rewriting rules that are applied when a
+message is received. These are described in chapter <<CHAPrewrite>>. For example,
+
+....
+headers_rewrite = a@b c@d f : \
+ x@y w@z
+....
+
+changes %a@b% into %c@d% in 'From:' header lines, and %x@y% into %w@z% in
+all address-bearing header lines. The rules are applied to the header lines
+just before they are written out at transport time, so they affect only those
+copies of the message that pass through the transport. However, only the
+message's original header lines, and any that were added by a system filter,
+are rewritten. If a router or transport adds header lines, they are
+not affected by this option. These rewriting rules are 'not' applied to the
+envelope. You can change the return path using %return_path%, but you cannot
+change envelope recipients at this time.
+
+
+oindex:[%home_directory%]
+`..'=
+%home_directory%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[transport,home directory for]
+This option specifies a home directory setting for the transport, overriding
+any value that may be set by the router. The home directory is placed in
+$home$ while expanding the transport's private options. It is also used as
+the current directory if no current directory is set by the
+%current_directory% option on the transport or the
+%transport_current_directory% option on the router.
+If the expansion fails for any reason, including forced failure, an error is
+logged, and delivery is deferred.
+
+
+oindex:[%initgroups%]
+`..'=
+%initgroups%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:[additional groups]
+cindex:[groups, additional]
+cindex:[transport,group; additional]
+If this option is true and the uid for the delivery process is provided by the
+transport, the 'initgroups()' function is called when running the transport
+to ensure that any additional groups associated with the uid are set up.
+
+
+oindex:[%message_size_limit%]
+`..'=
+%message_size_limit%, Use: 'transports', Type: 'string'!!, Default: '0'
+===
+
+cindex:[limit,message size per transport]
+cindex:[size of message, limit]
+cindex:[transport,message size; limiting]
+This option controls the size of messages passed through the transport. It is
+expanded before use; the result of the expansion must be a sequence of digits,
+optionally followed by K or M.
+If the expansion fails for any reason, including forced failure, or if the
+result is not of the required form, delivery is deferred.
+If the value is greater than zero and the size of a message exceeds this
+limit, the address is failed. If there is any chance that the resulting bounce
+message could be routed to the same transport, you should ensure that
+%return_size_limit% is less than the transport's %message_size_limit%, as
+otherwise the bounce message will fail to get delivered.
+
+
+
+oindex:[%rcpt_include_affixes%]
+`..'=
+%rcpt_include_affixes%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:[prefix,for local part; including in envelope]
+cindex:[suffix,for local part; including in envelope]
+cindex:[local part,prefix]
+cindex:[local part,suffix]
+When this option is false (the default), and an address that has had any
+affixes (prefixes or suffixes) removed from the local part is delivered by any
+form of SMTP or LMTP, the affixes are not included. For example, if a router
+that contains
+
+ local_part_prefix = *-
+
+routes the address 'abc-xyz@some.domain' to an SMTP transport, the envelope
+is delivered with
+
+ RCPT TO:<xyz@some.domain>
+
+If %rcpt_include_affixes% is set true, the whole local part is included in
+the RCPT command. This option applies to BSMTP deliveries by the
+^appendfile^ and ^pipe^ transports as well as to the ^lmtp^ and ^smtp^
+transports.
+
+
+oindex:[%retry_use_local_part%]
+`..'=
+%retry_use_local_part%, Use: 'transports', Type: 'boolean', Default: 'see below'
+===
+
+cindex:[hints database,retry keys]
+When a delivery suffers a temporary failure, a retry record is created
+in Exim's hints database. For remote deliveries, the key for the retry record
+is based on the name and/or IP address of the failing remote host. For local
+deliveries, the key is normally the entire address, including both the local
+part and the domain. This is suitable for most common cases of local delivery
+temporary failure -- for example, exceeding a mailbox quota should delay only
+deliveries to that mailbox, not to the whole domain.
+
+However, in some special cases you may want to treat a temporary local delivery
+as a failure associated with the domain, and not with a particular local part.
+(For example, if you are storing all mail for some domain in files.) You can do
+this by setting %retry_use_local_part% false.
+
+For all the local transports, its default value is true. For remote transports,
+the default value is false for tidiness, but changing the value has no effect
+on a remote transport in the current implementation.
+
+
+oindex:[%return_path%]
+`..'=
+%return_path%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[envelope sender]
+cindex:[transport,return path; changing]
+cindex:[return path,changing in transport]
+If this option is set, the string is expanded at transport time and replaces
+the existing return path (envelope sender) value in the copy of the message
+that is being delivered. An empty return path is permitted. This feature is
+designed for remote deliveries, where the value of this option is used in the
+SMTP MAIL command. If you set %return_path% for a local transport, the
+only effect is to change the address that is placed in the 'Return-path:'
+header line, if one is added to the message (see the next option).
+
+The expansion can refer to the existing value via $return_path$. This is
+either the message's envelope sender, or an address set by the
+%errors_to% option on a router. If the expansion is forced to fail, no
+replacement occurs; if it fails for another reason, delivery is deferred. This
+option can be used to support VERP (Variable Envelope Return Paths) -- see
+chapter <<CHAPSMTP>>.
+
+*Note*: If a delivery error is detected locally,
+including the case when a remote server rejects a message at SMTP time,
+the bounce message is not sent to the value of this option, but to the
+previously set errors address (which defaults to the incoming sender address).
+
+
+
+oindex:[%return_path_add%]
+`..'=
+%return_path_add%, Use: 'transports', Type: 'boolean', Default: 'false'
+===
+
+cindex:['Return-path:' header line]
+If this option is true, a 'Return-path:' header is added to the message.
+Although the return path is normally available in the prefix line of BSD
+mailboxes, this is commonly not displayed by MUAs, and so the user does not
+have easy access to it.
+
+RFC 2821 states that the 'Return-path:' header is added to a message ``when the
+delivery SMTP server makes the final delivery''. This implies that this header
+should not be present in incoming messages. Exim has a configuration option,
+%return_path_remove%, which requests removal of this header from incoming
+messages, so that delivered messages can safely be resent to other recipients.
+
+
+oindex:[%shadow_condition%]
+`..'=
+%shadow_condition%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+See %shadow_transport% below.
+
+
+oindex:[%shadow_transport%]
+`..'=
+%shadow_transport%, Use: 'transports', Type: 'string', Default: 'unset'
+===
+
+cindex:[shadow transport]
+cindex:[transport,shadow]
+A local transport may set the %shadow_transport% option to the name of another
+local transport. Shadow remote transports are not supported.
+
+Whenever a delivery to the main transport succeeds, and either
+%shadow_condition% is unset, or its expansion does not result in the empty
+string or one of the strings ``0'' or ``no'' or ``false'', the message is also passed
+to the shadow transport, with the same delivery address or addresses.
+If expansion fails, no action is taken except that non-forced expansion
+failures cause a log line to be written.
+
+The result of the shadow transport is discarded and does not affect the
+subsequent processing of the message. Only a single level of shadowing is
+provided; the %shadow_transport% option is ignored on any transport when it is
+running as a shadow. Options concerned with output from pipes are also ignored.
+
+The log line for the successful delivery has an item added on the end, of the
+form
+
+ ST=<shadow transport name>
+
+If the shadow transport did not succeed, the error message is put in
+parentheses afterwards.
+
+Shadow transports can be used for a number of different purposes, including
+keeping more detailed log information than Exim normally provides, and
+implementing automatic acknowledgement policies based on message headers that
+some sites insist on.
+
+
+oindex:[%transport_filter%]
+`..'=
+%transport_filter%, Use: 'transports', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[transport,filter]
+cindex:[filter,transport filter]
+This option sets up a filtering (in the Unix shell sense) process for messages
+at transport time. It should not be confused with mail filtering as set up by
+individual users or via a system filter.
+
+When the message is about to be written out, the command specified by
+%transport_filter% is started up in a separate process, and the entire
+message, including the header lines, is passed to it on its standard input
+(this in fact is done from a third process, to avoid deadlock).
+The command must be specified as an absolute path.
+
+The lines of the message that are written to the transport filter are
+terminated by newline (``\n'').
+
+The message is passed to the filter before any SMTP-specific processing, such
+as turning ``\n'' into ``\r\n'' and escaping lines beginning with a dot, and
+also before any processing implied by the settings of %check_string% and
+%escape_string% in the ^appendfile^ or ^pipe^ transports.
+
+The standard error for the filter process is set to the same destination as its
+standard output; this is read and written to the message's ultimate
+destination.
+
+The filter can perform any transformations it likes, but of course should take
+care not to break RFC 2822 syntax. A demonstration Perl script is provided in
+_util/transport-filter.pl_; this makes a few arbitrary modifications just to
+show the possibilities. Exim does not check the result, except to test for a
+final newline when SMTP is in use. All messages transmitted over SMTP must end
+with a newline, so Exim supplies one if it is missing.
+
+cindex:[SMTP,SIZE]
+A problem might arise if the filter increases the size of a message that is
+being sent down an SMTP connection. If the receiving SMTP server has indicated
+support for the SIZE parameter, Exim will have sent the size of the message
+at the start of the SMTP session. If what is actually sent is substantially
+more, the server might reject the message. This can be worked round by setting
+the %size_addition% option on the ^smtp^ transport, either to allow for
+additions to the message, or to disable the use of SIZE altogether.
+
+The value of the %transport_filter% option is the command string for starting
+the filter, which is run directly from Exim, not under a shell. The string is
+parsed by Exim in the same way as a command string for the ^pipe^ transport:
+Exim breaks it up into arguments and then expands each argument separately. The
+special argument $pipe_addresses$ is replaced by a number of arguments, one
+for each address that applies to this delivery. (This isn't an ideal name for
+this feature here, but as it was already implemented for the ^pipe^
+transport, it seemed sensible not to change it.)
+
+cindex:[$host$]
+cindex:[$host_address$]
+The expansion variables $host$ and $host_address$ are available when the
+transport is a remote one. They contain the name and IP address of the host to
+which the message is being sent. For example:
+
+....
+transport_filter = /some/directory/transport-filter.pl \
+ $host $host_address $sender_address $pipe_addresses
+....
+
+The filter process is run under the same uid and gid as the normal delivery.
+For remote deliveries this is the Exim uid/gid by default.
+
+The command should normally yield a zero return code. A non-zero code is taken
+to mean that the transport filter failed in some way. Delivery of the message
+is deferred. It is not possible to cause a message to be bounced from a
+transport filter.
+
+
+If a transport filter is set on an autoreply transport, the original message is
+passed through the filter as it is being copied into the newly generated
+message, which happens if the %return_message% option is set.
+
+
+oindex:[%transport_filter_timeout%]
+`..'=
+%transport_filter_timeout%, Use: 'transports', Type: 'time', Default: '5m'
+===
+
+cindex:[transport filter, timeout]
+When Exim is reading the output of a transport filter, it a applies a timeout
+that can be set by this option. Exceeding the timeout is treated as a
+temporary delivery failure.
+
+
+
+oindex:[%user%]
+`..'=
+%user%, Use: 'transports', Type: 'string'!!, Default: 'Exim user'
+===
+
+cindex:[uid (user id),local delivery]
+cindex:[transport user, specifying]
+This option specifies the user under whose uid the delivery process is to be
+run, overriding any uid that may have been set by the router. If the user is
+given as a name, the uid is looked up from the password data, and the
+associated group is taken as the value of the gid to be used if the %group%
+option is not set.
+
+For deliveries that use local transports, a user and group are normally
+specified explicitly or implicitly (for example, as a result of
+%check_local_user%) by the router or transport.
+
+cindex:[hints database,access by remote transport]
+For remote transports, you should leave this option unset unless you really are
+sure you know what you are doing. When a remote transport is running, it needs
+to be able to access Exim's hints databases, because each host may have its own
+retry data.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPbatching]]
+[titleabbrev="Address batching"]
+Address batching in local transports
+------------------------------------
+cindex:[transport,local; address batching in]
+The only remote transport (^smtp^) is normally configured to handle more than
+one address at a time, so that when several addresses are routed to the same
+remote host, just one copy of the message is sent. Local transports, however,
+normally handle one address at a time. That is, a separate instance of the
+transport is run for each address that is routed to the transport. A separate
+copy of the message is delivered each time.
+
+cindex:[batched local delivery]
+cindex:[%batch_max%]
+cindex:[%batch_id%]
+In special cases, it may be desirable to handle several addresses at once in a
+local transport, for example:
+
+- In an ^appendfile^ transport, when storing messages in files for later
+delivery by some other means, a single copy of the message with multiple
+recipients saves space.
+
+- In an ^lmtp^ transport, when delivering over ``local SMTP'' to some process,
+a single copy saves time, and is the normal way LMTP is expected to work.
+
+- In a ^pipe^ transport, when passing the message
+to a scanner program or
+to some other delivery mechanism such as UUCP, multiple recipients may be
+acceptable.
+
+The three local transports (^appendfile^, ^lmtp^, and ^pipe^) all have
+the same options for controlling multiple (``batched'') deliveries, namely
+%batch_max% and %batch_id%. To save repeating the information for each
+transport, these options are described here.
+
+The %batch_max% option specifies the maximum number of addresses that can be
+delivered together in a single run of the transport. Its default value is one.
+When more than one address is routed to a transport that has a %batch_max%
+value greater than one, the addresses are delivered in a batch (that is, in a
+single run of the transport), subject to certain conditions:
+
+- If any of the transport's options contain a reference to $local_part$, no
+batching is possible.
+
+- If any of the transport's options contain a reference to $domain$, only
+addresses with the same domain are batched.
+
+- cindex:[customizing,batching condition]
+If %batch_id% is set, it is expanded for each address, and only those
+addresses with the same expanded value are batched. This allows you to specify
+customized batching conditions.
+Failure of the expansion for any reason, including forced failure, disables
+batching, but it does not stop the delivery from taking place.
+
+- Batched addresses must also have the same errors address (where to send
+delivery errors), the same header additions and removals, the same user and
+group for the transport, and if a host list is present, the first host must
+be the same.
+
+cindex:['Envelope-to:' header line]
+If the generic %envelope_to_add% option is set for the transport, the
+'Envelope-to:' header that is added to the message contains all the addresses
+that are batched together.
+
+The ^appendfile^ and ^pipe^ transports have an option called %use_bsmtp%,
+which causes them to deliver the message in ``batched SMTP'' format, with the
+envelope represented as SMTP commands. The %check_string% and %escape_string%
+options are forced to the values
+
+ check_string = "."
+ escape_string = ".."
+
+when batched SMTP is in use. A full description of the batch SMTP mechanism is
+given in section <<SECTbatchSMTP>>. The ^lmtp^ transport does not have a
+%use_bsmtp% option, because it always delivers using the SMTP protocol.
+
+cindex:[^pipe^ transport,with multiple addresses]
+If you are not using BSMTP, but are using a ^pipe^ transport, you can include
+$pipe_addresses$ as part of the command. This is not a true variable; it is
+a bit of magic that causes each of the recipient addresses to be inserted into
+the command as a separate argument. This provides a way of accessing all the
+addresses that are being delivered in the batch.
+
+If you are using a batching ^appendfile^ transport without %use_bsmtp%, the
+only way to preserve the recipient addresses is to set the %envelope_to_add%
+option. This causes an 'Envelope-to:' header line to be added to the message,
+containing all the recipients.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPappendfile]]
+The appendfile transport
+------------------------
+cindex:[^appendfile^ transport]
+cindex:[transports,^appendfile^]
+cindex:[directory creation]
+cindex:[creating directories]
+The ^appendfile^ transport delivers a message by appending it to an existing
+file, or by creating an entirely new file in a specified directory. Single
+files to which messages are appended can be in the traditional Unix mailbox
+format, or optionally in the MBX format supported by the Pine MUA and
+University of Washington IMAP daemon, 'inter alia'. When each message is
+being delivered as a separate file, ``maildir'' format can optionally be used to
+give added protection against failures that happen part-way through the
+delivery. A third form of separate-file delivery known as ``mailstore'' is also
+supported. For all file formats, Exim attempts to create as many levels of
+directory as necessary, provided that %create_directory% is set.
+
+The code for the optional formats is not included in the Exim binary by
+default. It is necessary to set SUPPORT_MBX, SUPPORT_MAILDIR and/or
+SUPPORT_MAILSTORE in _Local/Makefile_ to have the appropriate code
+included.
+
+cindex:[quota,system]
+Exim recognises system quota errors, and generates an appropriate message. Exim
+also supports its own quota control within the transport, for use when the
+system facility is unavailable or cannot be used for some reason.
+
+If there is an error while appending to a file (for example, quota exceeded or
+partition filled), Exim attempts to reset the file's length and last
+modification time back to what they were before. If there is an error while
+creating an entirely new file, the new file is removed.
+
+Before appending to a file, a number of security checks are made, and the
+file is locked. A detailed description is given below, after the list of
+private options.
+
+^appendfile^ is most commonly used for local deliveries to users' mailboxes.
+However, it can also be used as a pseudo-remote transport for putting messages
+into files for remote delivery by some means other than Exim. ``Batch SMTP''
+format is often used in this case (see the %use_bsmtp% option).
+
+
+
+[[SECTfildiropt]]
+The file and directory options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The %file% option specifies a single file, to which the message is appended;
+the %directory% option specifies a directory, in which a new file containing
+the message is created. Only one of these two options can be set, and for
+normal deliveries to mailboxes, one of them 'must' be set.
+
+However, ^appendfile^ is also used for delivering messages to files or
+directories whose names (or parts of names) are obtained from alias,
+forwarding, or filtering operations (for example, a %save% command in a user's
+Exim filter). When such a transport is running, $local_part$ contains the
+local part that was aliased or forwarded, and $address_file$ contains the
+name (or partial name) of the file or directory generated by the redirection
+operation. There are two cases:
+
+- If neither %file% nor %directory% is set, the redirection operation
+must specify an absolute path (one that begins with `/`). This is the most
+common case when users with local accounts use filtering to sort mail into
+different folders. See for example, the ^address_file^ transport in the
+default configuration. If the path ends with a slash, it is assumed to be the
+name of a directory. A delivery to a directory can also be forced by setting
+%maildir_format% or %mailstore_format%.
+
+- If %file% or %directory% is set for a delivery from a redirection, it is used
+to determine the file or directory name for the delivery. Normally, the
+contents of $address_file$ are used in some way in the string expansion.
+
+
+cindex:[Sieve filter,configuring ^appendfile^]
+cindex:[Sieve filter,relative mailbox path handling]
+As an example of the second case, consider an environment where users do not
+have home directories. They may be permitted to use Exim filter commands of the
+form:
+
+ save folder23
+
+or Sieve filter commands of the form:
+
+ require "fileinto";
+ fileinto "folder23";
+
+In this situation, the expansion of %file% or %directory% in the transport must
+transform the relative path into an appropriate absolute file name. In the case
+of Sieve filters, the name 'inbox' must be handled. It is the name that is
+used as a result of a ``keep'' action in the filter. This example shows one way
+of handling this requirement:
+
+....
+file = ${if eq{$address_file}{inbox} \
+ {/var/mail/$local_part} \
+ {${if eq{${substr_0_1:$address_file}}{/} \
+ {$address_file} \
+ {$home/mail/$address_file} \
+ }} \
+ }
+....
+
+With this setting of %file%, 'inbox' refers to the standard mailbox location,
+absolute paths are used without change, and other folders are in the _mail_
+directory within the home directory.
+
+*Note 1*: While processing an Exim filter, a relative path such as
+_folder23_ is turned into an absolute path if a home directory is known to
+the router. In particular, this is the case if %check_local_user% is set. If
+you want to prevent this happening at routing time, you can set
+%router_home_directory% empty. This forces the router to pass the relative
+path to the transport.
+
+*Note 2*: An absolute path in $address_file$ is not treated specially;
+the %file% or %directory% option is still used if it is set.
+
+
+
+
+Private options for appendfile
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^appendfile^ transport]
+
+
+
+oindex:[%allow_fifo%]
+`..'=
+%allow_fifo%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[fifo (named pipe)]
+cindex:[named pipe (fifo)]
+cindex:[pipe,named (fifo)]
+Setting this option permits delivery to named pipes (FIFOs) as well as to
+regular files. If no process is reading the named pipe at delivery time, the
+delivery is deferred.
+
+
+oindex:[%allow_symlink%]
+`..'=
+%allow_symlink%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[symbolic link,to mailbox]
+cindex:[mailbox,symbolic link]
+By default, ^appendfile^ will not deliver if the path name for the file is
+that of a symbolic link. Setting this option relaxes that constraint, but there
+are security issues involved in the use of symbolic links. Be sure you know
+what you are doing if you set this. Details of exactly what this option affects
+are included in the discussion which follows this list of options.
+
+
+oindex:[%batch_id%]
+`..'=
+%batch_id%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+See the description of local delivery batching in chapter <<CHAPbatching>>.
+However, batching is automatically disabled for ^appendfile^ deliveries that
+happen as a result of forwarding or aliasing or other redirection directly to a
+file.
+
+
+oindex:[%batch_max%]
+`..'=
+%batch_max%, Use: 'appendfile', Type: 'integer', Default: '1'
+===
+
+See the description of local delivery batching in chapter <<CHAPbatching>>.
+
+
+oindex:[%check_group%]
+`..'=
+%check_group%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+When this option is set, the group owner of the file defined by the %file%
+option is checked to see that it is the same as the group under which the
+delivery process is running. The default setting is false because the default
+file mode is 0600, which means that the group is irrelevant.
+
+
+oindex:[%check_owner%]
+`..'=
+%check_owner%, Use: 'appendfile', Type: 'boolean', Default: 'true'
+===
+
+When this option is set, the owner of the file defined by the %file% option is
+checked to ensure that it is the same as the user under which the delivery
+process is running.
+
+
+oindex:[%check_string%]
+`..'=
+%check_string%, Use: 'appendfile', Type: 'string', Default: 'see below'
+===
+
+cindex:[``From'' line]
+As ^appendfile^ writes the message, the start of each line is tested for
+matching %check_string%, and if it does, the initial matching characters are
+replaced by the contents of %escape_string%. The value of %check_string% is a
+literal string, not a regular expression, and the case of any letters it
+contains is significant.
+
+If %use_bsmtp% is set the values of %check_string% and %escape_string% are
+forced to ``.'' and ``..'' respectively, and any settings in the configuration are
+ignored. Otherwise, they default to ``From '' and ``>From '' when the %file% option
+is set, and unset when
+any of the %directory%, %maildir%, or %mailstore% options are set.
+
+The default settings, along with %message_prefix% and %message_suffix%, are
+suitable for traditional ``BSD'' mailboxes, where a line beginning with ``From
+'' indicates the start of a new message. All four options need changing if
+another format is used. For example, to deliver to mailboxes in MMDF format:
+cindex:[MMDF format mailbox]
+cindex:[mailbox,MMDF format]
+
+ check_string = "\1\1\1\1\n"
+ escape_string = "\1\1\1\1 \n"
+ message_prefix = "\1\1\1\1\n"
+ message_suffix = "\1\1\1\1\n"
+
+oindex:[%create_directory%]
+`..'=
+%create_directory%, Use: 'appendfile', Type: 'boolean', Default: 'true'
+===
+
+cindex:[directory creation]
+When this option is true, Exim attempts to create any missing superior
+directories for the file that it is about to write. A created directory's mode
+is given by the %directory_mode% option.
+
+The group ownership of a newly created directory is highly dependent on the
+operating system (and possibly the file system) that is being used. For
+example, in Solaris, if the parent directory has the setgid bit set, its group
+is propagated to the child; if not, the currently set group is used. However,
+in FreeBSD, the parent's group is always used.
+
+
+
+oindex:[%create_file%]
+`..'=
+%create_file%, Use: 'appendfile', Type: 'string', Default: 'anywhere'
+===
+
+This option constrains the location of files and directories that are created
+by this transport. It applies to files defined by the %file% option and
+directories defined by the %directory% option. In the case of maildir delivery,
+it applies to the top level directory, not the maildir directories beneath.
+
+The option must be set to one of the words ``anywhere'', ``inhome'', or
+``belowhome''. In the second and third cases, a home directory must have been set
+for the transport. This option is not useful when an explicit file name is
+given for normal mailbox deliveries. It is intended for the case when file
+names are generated from users' _.forward_ files. These are usually handled
+by an ^appendfile^ transport called %address_file%. See also
+%file_must_exist%.
+
+
+oindex:[%directory%]
+`..'=
+%directory%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+This option is mutually exclusive with the %file% option, but one of %file% or
+%directory% must be set, unless the delivery is the direct result of a
+redirection (see section <<SECTfildiropt>>).
+
+When %directory% is set, the string is expanded, and the message is delivered
+into a new file or files in or below the given directory, instead of being
+appended to a single mailbox file. A number of different formats are provided
+(see %maildir_format% and %mailstore_format%), and see section <<SECTopdir>>
+for further details of this form of delivery.
+
+
+oindex:[%directory_file%]
+`..'=
+%directory_file%, Use: 'appendfile', Type: 'string'!!, Default: `q\$\{base62{co}\$tod_epoch\}-\$inode`
+===
+
+cindex:[base62]
+When %directory% is set, but neither %maildir_format% nor %mailstore_format%
+is set, ^appendfile^ delivers each message into a file whose name is obtained
+by expanding this string. The default value generates a unique name from the
+current time, in base 62 form, and the inode of the file. The variable
+$inode$ is available only when expanding this option.
+
+
+oindex:[%directory_mode%]
+`..'=
+%directory_mode%, Use: 'appendfile', Type: 'octal integer', Default: '0700'
+===
+
+If ^appendfile^ creates any directories as a result of the %create_directory%
+option, their mode is specified by this option.
+
+
+oindex:[%escape_string%]
+`..'=
+%escape_string%, Use: 'appendfile', Type: 'string', Default: 'see description'
+===
+
+See %check_string% above.
+
+
+oindex:[%file%]
+`..'=
+%file%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+This option is mutually exclusive with the %directory% option, but one of
+%file% or %directory% must be set, unless the delivery is the direct result of
+a redirection (see section <<SECTfildiropt>>). The %file% option specifies a
+single file, to which the message is appended. One or more of
+%use_fcntl_lock%, %use_flock_lock%, or %use_lockfile% must be set with
+%file%.
+
+cindex:[NFS,lock file]
+cindex:[locking files]
+cindex:[lock files]
+If you are using more than one host to deliver over NFS into the same
+mailboxes, you should always use lock files.
+
+The string value is expanded for each delivery, and must yield an absolute
+path. The most common settings of this option are variations on one of these
+examples:
+
+ file = /var/spool/mail/$local_part
+ file = /home/$local_part/inbox
+ file = $home/inbox
+
+cindex:[``sticky'' bit]
+In the first example, all deliveries are done into the same directory. If Exim
+is configured to use lock files (see %use_lockfile% below) it must be able to
+create a file in the directory, so the ``sticky'' bit must be turned on for
+deliveries to be possible, or alternatively the %group% option can be used to
+run the delivery under a group id which has write access to the directory.
+
+
+
+oindex:[%file_format%]
+`..'=
+%file_format%, Use: 'appendfile', Type: 'string', Default: 'unset'
+===
+
+cindex:[file,mailbox; checking existing format]
+This option requests the transport to check the format of an existing file
+before adding to it. The check consists of matching a specific string at the
+start of the file. The value of the option consists of an even number of
+colon-separated strings. The first of each pair is the test string, and the
+second is the name of a transport. If the transport associated with a matched
+string is not the current transport, control is passed over to the other
+transport. For example, suppose the standard ^local_delivery^ transport has
+this added to it:
+
+....
+file_format = "From : local_delivery :\
+ \1\1\1\1\n : local_mmdf_delivery"
+....
+
+Mailboxes that begin with ``From'' are still handled by this transport, but if a
+mailbox begins with four binary ones followed by a newline, control is passed
+to a transport called %local_mmdf_delivery%, which presumably is configured
+to do the delivery in MMDF format. If a mailbox does not exist or is empty, it
+is assumed to match the current transport. If the start of a mailbox doesn't
+match any string, or if the transport named for a given string is not defined,
+delivery is deferred.
+
+
+oindex:[%file_must_exist%]
+`..'=
+%file_must_exist%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, the file specified by the %file% option must exist, and
+an error occurs if it does not. Otherwise, it is created if it does not exist.
+
+
+oindex:[%lock_fcntl_timeout%]
+`..'=
+%lock_fcntl_timeout%, Use: 'appendfile', Type: 'time', Default: '0s'
+===
+
+cindex:[timeout,mailbox locking]
+cindex:[mailbox locking,blocking and non-blocking]
+cindex:[locking files]
+By default, the ^appendfile^ transport uses non-blocking calls to 'fcntl()'
+when locking an open mailbox file. If the call fails, the delivery process
+sleeps for %lock_interval% and tries again, up to %lock_retries% times.
+Non-blocking calls are used so that the file is not kept open during the wait
+for the lock; the reason for this is to make it as safe as possible for
+deliveries over NFS in the case when processes might be accessing an NFS
+mailbox without using a lock file. This should not be done, but
+misunderstandings and hence misconfigurations are not unknown.
+
+On a busy system, however, the performance of a non-blocking lock approach is
+not as good as using a blocking lock with a timeout. In this case, the waiting
+is done inside the system call, and Exim's delivery process acquires the lock
+and can proceed as soon as the previous lock holder releases it.
+
+If %lock_fcntl_timeout% is set to a non-zero time, blocking locks, with that
+timeout, are used. There may still be some retrying: the maximum number of
+retries is
+
+ (lock_retries * lock_interval) / lock_fcntl_timeout
+
+rounded up to the next whole number. In other words, the total time during
+which ^appendfile^ is trying to get a lock is roughly the same, unless
+%lock_fcntl_timeout% is set very large.
+
+You should consider setting this option if you are getting a lot of delayed
+local deliveries because of errors of the form
+
+ failed to lock mailbox /some/file (fcntl)
+
+
+
+oindex:[%lock_flock_timeout%]
+`..'=
+%lock_flock_timeout%, Use: 'appendfile', Type: 'time', Default: '0s'
+===
+
+This timeout applies to file locking when using 'flock()' (see %use_flock%);
+the timeout operates in a similar manner to %lock_fcntl_timeout%.
+
+
+oindex:[%lock_interval%]
+`..'=
+%lock_interval%, Use: 'appendfile', Type: 'time', Default: '3s'
+===
+
+This specifies the time to wait between attempts to lock the file. See below
+for details of locking.
+
+
+oindex:[%lock_retries%]
+`..'=
+%lock_retries%, Use: 'appendfile', Type: 'integer', Default: '10'
+===
+
+This specifies the maximum number of attempts to lock the file. A value of zero
+is treated as 1. See below for details of locking.
+
+
+oindex:[%lockfile_mode%]
+`..'=
+%lockfile_mode%, Use: 'appendfile', Type: 'octal integer', Default: '0600'
+===
+
+This specifies the mode of the created lock file, when a lock file is being
+used (see %use_lockfile%).
+
+
+oindex:[%lockfile_timeout%]
+`..'=
+%lockfile_timeout%, Use: 'appendfile', Type: 'time', Default: '30m'
+===
+
+cindex:[timeout,mailbox locking]
+When a lock file is being used (see %use_lockfile%), if a lock file already
+exists and is older than this value, it is assumed to have been left behind by
+accident, and Exim attempts to remove it.
+
+
+oindex:[%mailbox_filecount%]
+`..'=
+%mailbox_filecount%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[mailbox,specifying size of]
+cindex:[size,of mailbox]
+If this option is set, it is expanded, and the result is taken as the current
+number of files in the mailbox. It must be a decimal number, optionally
+followed by K or M. This provides a way of obtaining this information from an
+external source that maintains the data.
+
+
+oindex:[%mailbox_size%]
+`..'=
+%mailbox_size%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[mailbox,specifying size of]
+cindex:[size,of mailbox]
+If this option is set, it is expanded, and the result is taken as the current
+size the mailbox. It must be a decimal number, optionally followed by K or M.
+This provides a way of obtaining this information from an external source that
+maintains the data. This is likely to be helpful for maildir deliveries where
+it is computationally expensive to compute the size of a mailbox.
+
+
+
+oindex:[%maildir_format%]
+`..'=
+%maildir_format%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[maildir format,specifying]
+If this option is set with the %directory% option, the delivery is into a new
+file, in the ``maildir'' format that is used by other mail software. When the
+transport is activated directly from a ^redirect^ router (for example, the
+^address_file^ transport in the default configuration), setting
+%maildir_format% causes the path received from the router to be treated as a
+directory, whether or not it ends with `/`. This option is available only if
+SUPPORT_MAILDIR is present in _Local/Makefile_. See section
+<<SECTmaildirdelivery>> below for further details.
+
+
+oindex:[%maildir_quota_directory_regex%]
+`..'=
+%maildir_quota_directory_regex%, Use: 'appendfile', Type: 'string', Default: 'See below'
+===
+
+cindex:[maildir format,quota; directories included in]
+cindex:[quota,maildir; directories included in]
+This option is relevant only when %maildir_use_size_file% is set. It defines
+a regular expression for specifying directories that should be included in the
+quota calculation. The default value is
+
+ maildir_quota_directory_regex = ^(?:cur|new|\..*)$
+
+which includes the _cur_ and _new_ directories, and any maildir++ folders
+(directories whose names begin with a dot). If you want to exclude the
+_Trash_
+folder from the count (as some sites do), you need to change this setting to
+
+ maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash).*)$
+
+This uses a negative lookahead in the regular expression to exclude the
+directory whose name is _.Trash_.
+
+
+oindex:[%maildir_retries%]
+`..'=
+%maildir_retries%, Use: 'appendfile', Type: 'integer', Default: '10'
+===
+
+This option specifies the number of times to retry when writing a file in
+``maildir'' format. See section <<SECTmaildirdelivery>> below.
+
+
+oindex:[%maildir_tag%]
+`..'=
+%maildir_tag%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+This option applies only to deliveries in maildir format, and is described in
+section <<SECTmaildirdelivery>> below.
+
+
+oindex:[%maildir_use_size_file%]
+`..'=
+%maildir_use_size_file%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[maildir format,_maildirsize_ file]
+Setting this option true enables support for _maildirsize_ files. Exim
+creates a _maildirsize_ file in a maildir if one does not exist, taking the
+quota from the %quota% option of the transport. If %quota% is unset, the value
+is zero. See section <<SECTmaildirdelivery>> below for further details.
+
+
+oindex:[%mailstore_format%]
+`..'=
+%mailstore_format%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[mailstore format,specifying]
+If this option is set with the %directory% option, the delivery is into two new
+files in ``mailstore'' format. The option is available only if
+SUPPORT_MAILSTORE is present in _Local/Makefile_. See section
+<<SECTopdir>> below for further details.
+
+
+oindex:[%mailstore_prefix%]
+`..'=
+%mailstore_prefix%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+This option applies only to deliveries in mailstore format, and is described in
+section <<SECTopdir>> below.
+
+
+oindex:[%mailstore_suffix%]
+`..'=
+%mailstore_suffix%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+This option applies only to deliveries in mailstore format, and is described in
+section <<SECTopdir>> below.
+
+
+oindex:[%mbx_format%]
+`..'=
+%mbx_format%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[locking files]
+cindex:[file,locking]
+cindex:[file,MBX format]
+cindex:[MBX format, specifying]
+This option is available only if Exim has been compiled with SUPPORT_MBX
+set in _Local/Makefile_. If %mbx_format% is set with the %file% option,
+the message is appended to the mailbox file in MBX format instead of
+traditional Unix format. This format is supported by Pine4 and its associated
+IMAP and POP daemons, by means of the 'c-client' library that they all use.
+
+*Note*: The %message_prefix% and %message_suffix% options are not
+automatically changed by the use of %mbx_format%. They should normally be set
+empty when using MBX format, so this option almost always appears in this
+combination:
+
+ mbx_format = true
+ message_prefix =
+ message_suffix =
+
+
+If none of the locking options are mentioned in the configuration,
+%use_mbx_lock% is assumed and the other locking options default to false. It
+is possible to specify the other kinds of locking with %mbx_format%, but
+%use_fcntl_lock% and %use_mbx_lock% are mutually exclusive. MBX locking
+interworks with 'c-client', providing for shared access to the mailbox. It
+should not be used if any program that does not use this form of locking is
+going to access the mailbox, nor should it be used if the mailbox file is NFS
+mounted, because it works only when the mailbox is accessed from a single host.
+
+If you set %use_fcntl_lock% with an MBX-format mailbox, you cannot use
+the standard version of 'c-client', because as long as it has a mailbox open
+(this means for the whole of a Pine or IMAP session), Exim will not be able to
+append messages to it.
+
+
+oindex:[%message_prefix%]
+`..'=
+%message_prefix%, Use: 'appendfile', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[``From'' line]
+The string specified here is expanded and output at the start of every message.
+The default is unset unless %file% is specified and %use_bsmtp% is not set, in
+which case it is:
+
+....
+message_prefix = "From ${if def:return_path{$return_path}\
+ {MAILER-DAEMON}} $tod_bsdinbox\n"
+....
+
+
+
+oindex:[%message_suffix%]
+`..'=
+%message_suffix%, Use: 'appendfile', Type: 'string'!!, Default: 'see below'
+===
+
+The string specified here is expanded and output at the end of every message.
+The default is unset unless %file% is specified and %use_bsmtp% is not set, in
+which case it is a single newline character. The suffix can be suppressed by
+setting
+
+ message_suffix =
+
+
+
+oindex:[%mode%]
+`..'=
+%mode%, Use: 'appendfile', Type: 'octal integer', Default: '0600'
+===
+
+If the output file is created, it is given this mode. If it already exists and
+has wider permissions, they are reduced to this mode. If it has narrower
+permissions, an error occurs unless %mode_fail_narrower% is false. However,
+if the delivery is the result of a %save% command in a filter file specifing a
+particular mode, the mode of the output file is always forced to take that
+value, and this option is ignored.
+
+
+oindex:[%mode_fail_narrower%]
+`..'=
+%mode_fail_narrower%, Use: 'appendfile', Type: 'boolean', Default: 'true'
+===
+
+This option applies in the case when an existing mailbox file has a narrower
+mode than that specified by the %mode% option. If %mode_fail_narrower% is
+true, the delivery is deferred (``mailbox has the wrong mode''); otherwise Exim
+continues with the delivery attempt, using the existing mode of the file.
+
+
+oindex:[%notify_comsat%]
+`..'=
+%notify_comsat%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, the 'comsat' daemon is notified after every successful
+delivery to a user mailbox. This is the daemon that notifies logged on users
+about incoming mail.
+
+
+oindex:[%quota%]
+`..'=
+%quota%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[quota,imposed by Exim]
+This option imposes a limit on the size of the file to which Exim is appending,
+or to the total space used in the directory tree when the %directory% option is
+set. In the latter case, computation of the space used is expensive, because
+all the files in the directory (and any sub-directories) have to be
+individually inspected and their sizes summed.
+(See %quota_size_regex% and %maildir_use_size_file% for ways to avoid this
+in environments where users have no shell access to their mailboxes).
+
+As there is no interlock against two simultaneous deliveries into a
+multi-file mailbox, it is possible for the quota to be overrun in this case.
+For single-file mailboxes, of course, an interlock is a necessity.
+
+A file's size is taken as its 'used' value. Because of blocking effects, this
+may be a lot less than the actual amount of disk space allocated to the file.
+If the sizes of a number of files are being added up, the rounding effect can
+become quite noticeable, especially on systems that have large block sizes.
+Nevertheless, it seems best to stick to the 'used' figure, because this is
+the obvious value which users understand most easily.
+
+The value of the option is expanded, and must then be a numerical value
+(decimal point allowed), optionally followed by one of the letters K or M. The
+expansion happens while Exim is running as root, before it changes uid for the
+delivery. This means that files which are inaccessible to the end user can be
+used to hold quota values that are looked up in the expansion. When delivery
+fails because this quota is exceeded, the handling of the error is as for
+system quota failures.
+
+*Note*: A value of zero is interpreted as ``no quota''.
+
+By default, Exim's quota checking mimics system quotas, and restricts the
+mailbox to the specified maximum size, though the value is not accurate to the
+last byte, owing to separator lines and additional headers that may get added
+during message delivery. When a mailbox is nearly full, large messages may get
+refused even though small ones are accepted, because the size of the current
+message is added to the quota when the check is made. This behaviour can be
+changed by setting %quota_is_inclusive% false. When this is done, the check
+for exceeding the quota does not include the current message. Thus, deliveries
+continue until the quota has been exceeded; thereafter, no further messages are
+delivered. See also %quota_warn_threshold%.
+
+
+oindex:[%quota_directory%]
+`..'=
+%quota_directory%, Use: 'appendfile', Type: 'string'!!, Default: 'unset'
+===
+
+This option defines the directory to check for quota purposes when delivering
+into individual files. The default is the delivery directory, or, if a file
+called _maildirfolder_ exists in a maildir directory, the parent of the
+delivery directory.
+
+
+oindex:[%quota_filecount%]
+`..'=
+%quota_filecount%, Use: 'appendfile', Type: 'string'!!, Default: '0'
+===
+
+This option applies when the %directory% option is set. It limits the total
+number of files in the directory (compare the inode limit in system quotas). It
+can only be used if %quota% is also set. The value is expanded; an expansion
+failure causes delivery to be deferred.
+
+
+oindex:[%quota_is_inclusive%]
+`..'=
+%quota_is_inclusive%, Use: 'appendfile', Type: 'boolean', Default: 'true'
+===
+
+See %quota% above.
+
+
+oindex:[%quota_size_regex%]
+`..'=
+%quota_size_regex%, Use: 'appendfile', Type: 'string', Default: 'unset'
+===
+
+This option applies when one of the delivery modes that writes a separate file
+for each message is being used. When Exim wants to find the size of one of
+these files in order to test the quota, it first checks %quota_size_regex%.
+If this is set to a regular expression that matches the file name, and it
+captures one string, that string is interpreted as a representation of the
+file's size. The value of %quota_size_regex% is not expanded.
+
+This feature is useful only when users have no shell access to their mailboxes
+-- otherwise they could defeat the quota simply by renaming the files. This
+facility can be used with maildir deliveries, by setting %maildir_tag% to add
+the file length to the file name. For example:
+
+ maildir_tag = ,S=$message_size
+ quota_size_regex = ,S=(\d+)
+
+The regular expression should not assume that the length is at the end of the
+file name (even though %maildir_tag% puts it there) because maildir MUAs
+sometimes add other information onto the ends of message file names.
+
+
+oindex:[%quota_warn_message%]
+`..'=
+%quota_warn_message%, Use: 'appendfile', Type: 'string'!!, Default: 'see below'
+===
+
+See below for the use of this option. If it is not set when
+%quota_warn_threshold% is set, it defaults to
+
+....
+quota_warn_message = "\
+ To: $local_part@$domain\n\
+ Subject: Your mailbox\n\n\
+ This message is automatically created \
+ by mail delivery software.\n\n\
+ The size of your mailbox has exceeded \
+ a warning threshold that is\n\
+ set by the system administrator.\n"
+....
+
+
+
+oindex:[%quota_warn_threshold%]
+`..'=
+%quota_warn_threshold%, Use: 'appendfile', Type: 'string'!!, Default: '0'
+===
+
+cindex:[quota,warning threshold]
+cindex:[mailbox,size warning]
+cindex:[size,of mailbox]
+This option is expanded in the same way as %quota% (see above). If the
+resulting value is greater than zero, and delivery of the message causes the
+size of the file or total space in the directory tree to cross the given
+threshold, a warning message is sent. If %quota% is also set, the threshold may
+be specified as a percentage of it by following the value with a percent sign.
+For example:
+
+ quota = 10M
+ quota_warn_threshold = 75%
+
+If %quota% is not set, a setting of %quota_warn_threshold% that ends with a
+percent sign is ignored.
+
+The warning message itself is specified by the %quota_warn_message% option,
+and it must start with a 'To:' header line containing the recipient(s). A
+'Subject:' line should also normally be supplied. The %quota% option does not
+have to be set in order to use this option; they are independent of one
+another except when the threshold is specified as a percentage.
+
+
+oindex:[%use_bsmtp%]
+`..'=
+%use_bsmtp%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[envelope sender]
+If this option is set true, ^appendfile^ writes messages in ``batch SMTP''
+format, with the envelope sender and recipient(s) included as SMTP commands. If
+you want to include a leading HELO command with such messages, you can do
+so by setting the %message_prefix% option. See section <<SECTbatchSMTP>> for
+details of batch SMTP.
+
+
+oindex:[%use_crlf%]
+`..'=
+%use_crlf%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+cindex:[carriage return]
+cindex:[linefeed]
+This option causes lines to be terminated with the two-character CRLF sequence
+(carriage return, linefeed) instead of just a linefeed character. In the case
+of batched SMTP, the byte sequence written to the file is then an exact image
+of what would be sent down a real SMTP connection.
+
+The contents of the %message_prefix% and %message_suffix% options are written
+verbatim, so must contain their own carriage return characters if these are
+needed. In cases where these options have non-empty defaults, the values end
+with a single linefeed, so they
+must
+be changed to end with `\r\n` if %use_crlf% is set.
+
+
+oindex:[%use_fcntl_lock%]
+`..'=
+%use_fcntl_lock%, Use: 'appendfile', Type: 'boolean', Default: 'see below'
+===
+
+This option controls the use of the 'fcntl()' function to lock a file for
+exclusive use when a message is being appended. It is set by default unless
+%use_flock_lock% is set. Otherwise, it should be turned off only if you know
+that all your MUAs use lock file locking. When both %use_fcntl_lock% and
+%use_flock_lock% are unset, %use_lockfile% must be set.
+
+
+oindex:[%use_flock_lock%]
+`..'=
+%use_flock_lock%, Use: 'appendfile', Type: 'boolean', Default: 'false'
+===
+
+This option is provided to support the use of 'flock()' for file locking, for
+the few situations where it is needed. Most modern operating systems support
+'fcntl()' and 'lockf()' locking, and these two functions interwork with
+each other. Exim uses 'fcntl()' locking by default.
+
+This option is required only if you are using an operating system where
+'flock()' is used by programs that access mailboxes (typically MUAs), and
+where 'flock()' does not correctly interwork with 'fcntl()'. You can use
+both 'fcntl()' and 'flock()' locking simultaneously if you want.
+
+cindex:[Solaris,'flock()' support]
+Not all operating systems provide 'flock()'. Some versions of Solaris do not
+have it (and some, I think, provide a not quite right version built on top of
+'lockf()'). If the OS does not have 'flock()', Exim will be built without
+the ability to use it, and any attempt to do so will cause a configuration
+error.
+
+*Warning*: 'flock()' locks do not work on NFS files (unless 'flock()'
+is just being mapped onto 'fcntl()' by the OS).
+
+
+oindex:[%use_lockfile%]
+`..'=
+%use_lockfile%, Use: 'appendfile', Type: 'boolean', Default: 'see below'
+===
+
+If this option is turned off, Exim does not attempt to create a lock file when
+appending to a mailbox file. In this situation, the only locking is by
+'fcntl()'. You should only turn %use_lockfile% off if you are absolutely
+sure that every MUA that is ever going to look at your users' mailboxes uses
+'fcntl()' rather than a lock file, and even then only when you are not
+delivering over NFS from more than one host.
+
+cindex:[NFS,lock file]
+In order to append to an NFS file safely from more than one host, it is
+necessary to take out a lock 'before' opening the file, and the lock file
+achieves this. Otherwise, even with 'fcntl()' locking, there is a risk of
+file corruption.
+
+The %use_lockfile% option is set by default unless %use_mbx_lock% is set. It
+is not possible to turn both %use_lockfile% and %use_fcntl_lock% off, except
+when %mbx_format% is set.
+
+
+oindex:[%use_mbx_lock%]
+`..'=
+%use_mbx_lock%, Use: 'appendfile', Type: 'boolean', Default: 'see below'
+===
+
+This option is available only if Exim has been compiled with SUPPORT_MBX
+set in _Local/Makefile_. Setting the option specifies that special MBX
+locking rules be used. It is set by default if %mbx_format% is set and none of
+the locking options are mentioned in the configuration. The locking rules are
+the same as are used by the 'c-client' library that underlies Pine and the
+IMAP4 and POP daemons that come with it (see the discussion below). The rules
+allow for shared access to the mailbox. However, this kind of locking does not
+work when the mailbox is NFS mounted.
+
+You can set %use_mbx_lock% with either (or both) of %use_fcntl_lock% and
+%use_flock_lock% to control what kind of locking is used in implementing the
+MBX locking rules. The default is to use 'fcntl()' if %use_mbx_lock% is set
+without %use_fcntl_lock% or %use_flock_lock%.
+
+
+
+
+[[SECTopappend]]
+Operational details for appending
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[appending to a file]
+cindex:[file,appending]
+Before appending to a file, the following preparations are made:
+
+- If the name of the file is _/dev/null_, no action is taken, and a success
+return is given.
+
+- cindex:[directory creation]
+If any directories on the file's path are missing, Exim creates them if the
+%create_directory% option is set. A created directory's mode is given by the
+%directory_mode% option.
+
+- If %file_format% is set, the format of an existing file is checked. If this
+indicates that a different transport should be used, control is passed to that
+transport.
+
+- cindex:[file,locking]
+cindex:[locking files]
+cindex:[NFS,lock file]
+If %use_lockfile% is set, a lock file is built in a way that will work
+reliably over NFS, as follows:
++
+--
+. Create a ``hitching post'' file whose name is that of the lock file with the
+current time, primary host name, and process id added, by opening for writing
+as a new file. If this fails with an access error, delivery is deferred.
+
+. Close the hitching post file, and hard link it to the lock file name.
+
+. If the call to 'link()' succeeds, creation of the lock file has succeeded.
+Unlink the hitching post name.
+
+. Otherwise, use 'stat()' to get information about the hitching post file, and
+then unlink hitching post name. If the number of links is exactly two, creation
+of the lock file succeeded but something (for example, an NFS server crash and
+restart) caused this fact not to be communicated to the 'link()' call.
+
+. If creation of the lock file failed, wait for %lock_interval% and try again,
+up to %lock_retries% times. However, since any program that writes to a
+mailbox should complete its task very quickly, it is reasonable to time out old
+lock files that are normally the result of user agent and system crashes. If an
+existing lock file is older than %lockfile_timeout% Exim attempts to unlink it
+before trying again.
+--
++
+- A call is made to 'lstat()' to discover whether the main file exists, and if
+so, what its characteristics are. If 'lstat()' fails for any reason other
+than non-existence, delivery is deferred.
+
+- cindex:[symbolic link,to mailbox]
+cindex:[mailbox,symbolic link]
+If the file does exist and is a symbolic link, delivery is deferred, unless the
+%allow_symlink% option is set, in which case the ownership of the link is
+checked, and then 'stat()' is called to find out about the real file, which
+is then subjected to the checks below. The check on the top-level link
+ownership prevents one user creating a link for another's mailbox in a sticky
+directory, though allowing symbolic links in this case is definitely not a good
+idea. If there is a chain of symbolic links, the intermediate ones are not
+checked.
+
+- If the file already exists but is not a regular file, or if the file's owner
+and group (if the group is being checked -- see %check_group% above) are
+different from the user and group under which the delivery is running,
+delivery is deferred.
+
+- If the file's permissions are more generous than specified, they are reduced.
+If they are insufficient, delivery is deferred, unless %mode_fail_narrower%
+is set false, in which case the delivery is tried using the existing
+permissions.
+
+- The file's inode number is saved, and the file is then opened for appending.
+If this fails because the file has vanished, ^appendfile^ behaves as if it
+hadn't existed (see below). For any other failures, delivery is deferred.
+
+- If the file is opened successfully, check that the inode number hasn't
+changed, that it is still a regular file, and that the owner and permissions
+have not changed. If anything is wrong, defer delivery and freeze the message.
+
+- If the file did not exist originally, defer delivery if the %file_must_exist%
+option is set. Otherwise, check that the file is being created in a permitted
+directory if the %create_file% option is set (deferring on failure), and then
+open for writing as a new file, with the O_EXCL and O_CREAT options,
+except when dealing with a symbolic link (the %allow_symlink% option must be
+set). In this case, which can happen if the link points to a non-existent file,
+the file is opened for writing using O_CREAT but not O_EXCL, because
+that prevents link following.
+
+- cindex:[loop,while file testing]
+If opening fails because the file exists, obey the tests given above for
+existing files. However, to avoid looping in a situation where the file is
+being continuously created and destroyed, the exists/not-exists loop is broken
+after 10 repetitions, and the message is then frozen.
+
+- If opening fails with any other error, defer delivery.
+
+- cindex:[file,locking]
+cindex:[locking files]
+Once the file is open, unless both %use_fcntl_lock% and %use_flock_lock%
+are false, it is locked using 'fcntl()' or 'flock()' or both. If
+%use_mbx_lock% is false, an exclusive lock is requested in each case.
+However, if %use_mbx_lock% is true,
+Exim takes out a shared lock on the open file,
+and an exclusive lock on the file whose name is
+
+ /tmp/.<device-number>.<inode-number>
++
+using the device and inode numbers of the open mailbox file, in accordance with
+the MBX locking rules.
++
+If Exim fails to lock the file, there are two possible courses of action,
+depending on the value of the locking timeout. This is obtained from
+%lock_fcntl_timeout% or %lock_flock_timeout%, as appropriate.
++
+If the timeout value is zero, the file is closed, Exim waits for
+%lock_interval%, and then goes back and re-opens the file as above and tries
+to lock it again. This happens up to %lock_retries% times, after which the
+delivery is deferred.
++
+If the timeout has a value greater than zero, blocking calls to 'fcntl()' or
+'flock()' are used (with the given timeout), so there has already been some
+waiting involved by the time locking fails. Nevertheless, Exim does not give up
+immediately. It retries up to
+
+ (lock_retries * lock_interval) / <timeout>
++
+times (rounded up).
+
+
+At the end of delivery, Exim closes the file (which releases the 'fcntl()'
+and/or 'flock()' locks) and then deletes the lock file if one was created.
+
+
+[[SECTopdir]]
+Operational details for delivery to a new file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[delivery,to single file]
+cindex:[``From'' line]
+When the %directory% option is set instead of %file%, each message is delivered
+into a newly-created file or set of files. When ^appendfile^ is activated
+directly from a ^redirect^ router, neither %file% nor %directory% is normally
+set, because the path for delivery is supplied by the router. (See for example,
+the ^address_file^ transport in the default configuration.) In this case,
+delivery is to a new file if either the path name ends in `/`, or the
+%maildir_format% or %mailstore_format% option is set.
+
+No locking is required while writing the message to a new file, so the various
+locking options of the transport are ignored. The ``From'' line that by default
+separates messages in a single file is not normally needed, nor is the escaping
+of message lines that start with ``From'', and there is no need to ensure a
+newline at the end of each message. Consequently, the default values for
+%check_string%, %message_prefix%, and %message_suffix% are all unset when
+any of %directory%, %maildir_format%, or %mailstore_format% is set.
+
+If Exim is required to check a %quota% setting, it adds up the sizes of all the
+files in the delivery directory by default. However, you can specify a
+different directory by setting %quota_directory%. Also, for maildir deliveries
+(see below) the _maildirfolder_ convention is honoured.
+
+
+cindex:[maildir format]
+cindex:[mailstore format]
+There are three different ways in which delivery to individual files can be
+done, controlled by the settings of the %maildir_format% and
+%mailstore_format% options. Note that code to support maildir or mailstore
+formats is not included in the binary unless SUPPORT_MAILDIR or
+SUPPORT_MAILSTORE, respectively, is set in _Local/Makefile_.
+
+cindex:[directory creation]
+In all three cases an attempt is made to create the directory and any necessary
+sub-directories if they do not exist, provided that the %create_directory%
+option is set (the default). The location of a created directory can be
+constrained by setting %create_file%. A created directory's mode is given by
+the %directory_mode% option. If creation fails, or if the %create_directory%
+option is not set when creation is required, delivery is deferred.
+
+
+
+[[SECTmaildirdelivery]]
+Maildir delivery
+~~~~~~~~~~~~~~~~
+cindex:[maildir format,description of]
+If the %maildir_format% option is true, Exim delivers each message by writing
+it to a file whose name is _tmp/<stime>.H<mtime>P<pid>.<host>_ in the
+given directory. If the delivery is successful, the file is renamed into the
+_new_ subdirectory.
+
+In the file name, <'stime'> is the current time of day in seconds, and
+<'mtime'> is the microsecond fraction of the time. After a maildir delivery,
+Exim checks that the time-of-day clock has moved on by at least one microsecond
+before terminating the delivery process. This guarantees uniqueness for the
+file name. However, as a precaution, Exim calls 'stat()' for the file before
+opening it. If any response other than ENOENT (does not exist) is given,
+Exim waits 2 seconds and tries again, up to %maildir_retries% times.
+
+cindex:[quota,in maildir delivery]
+cindex:[maildir++]
+If Exim is required to check a %quota% setting before a maildir delivery, and
+%quota_directory% is not set, it looks for a file called _maildirfolder_ in
+the maildir directory (alongside _new_, _cur_, _tmp_). If this exists,
+Exim assumes the directory is a maildir++ folder directory, which is one level
+down from the user's top level mailbox directory. This causes it to start at
+the parent directory instead of the current directory when calculating the
+amount of space used.
+
+One problem with delivering into a multi-file mailbox is that it is
+computationally expensive to compute the size of the mailbox for quota
+checking. Various approaches have been taken to reduce the amount of work
+needed. The next two sections describe two of them. A third alternative is to
+use some external process for maintaining the size data, and use the expansion
+of the %mailbox_size% option as a way of importing it into Exim.
+
+
+
+
+Using tags to record message sizes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+If %maildir_tag% is set, the string is expanded for each delivery.
+When the maildir file is renamed into the _new_ sub-directory, the
+tag is added to its name. However, if adding the tag takes the length of the
+name to the point where the test 'stat()' call fails with ENAMETOOLONG,
+the tag is dropped and the maildir file is created with no tag.
+
+Tags can be used to encode the size of files in their names; see
+%quota_size_regex% above for an example. The expansion of %maildir_tag%
+happens after the message has been written. The value of the $message_size$
+variable is set to the number of bytes actually written. If the expansion is
+forced to fail, the tag is ignored, but a non-forced failure causes delivery to
+be deferred. The expanded tag may contain any printing characters except ``/''.
+Non-printing characters in the string are ignored; if the resulting string is
+empty, it is ignored. If it starts with an alphanumeric character, a leading
+colon is inserted.
+
+
+
+Using a maildirsize file
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[quota,in maildir delivery]
+cindex:[maildir format,_maildirsize_ file]
+If %maildir_use_size_file% is true, Exim implements the maildir++ rules for
+storing quota and message size information in a file called _maildirsize_
+within the maildir directory. If this file does not exist, Exim creates it,
+setting the quota from the %quota% option of the transport. If the maildir
+directory itself does not exist, it is created before any attempt to write a
+_maildirsize_ file.
+
+The _maildirsize_ file is used to hold information about the sizes of
+messages in the maildir, thus speeding up quota calculations. The quota value
+in the file is just a cache; if the quota is changed in the transport, the new
+value overrides the cached value when the next message is delivered. The cache
+is maintained for the benefit of other programs that access the maildir and
+need to know the quota.
+
+If the %quota% option in the transport is unset or zero, the _maildirsize_
+file is maintained (with a zero quota setting), but no quota is imposed.
+
+A regular expression is available for controlling which directories in the
+maildir participate in quota calculations. See the description of the
+%maildir_quota_directory_regex% option above for details.
+
+
+
+Mailstore delivery
+~~~~~~~~~~~~~~~~~~
+cindex:[mailstore format,description of]
+If the %mailstore_format% option is true, each message is written as two files
+in the given directory. A unique base name is constructed from the message id
+and the current delivery process, and the files that are written use this base
+name plus the suffixes _.env_ and _.msg_. The _.env_ file contains the
+message's envelope, and the _.msg_ file contains the message itself.
+
+During delivery, the envelope is first written to a file with the suffix
+_.tmp_. The _.msg_ file is then written, and when it is complete, the
+_.tmp_ file is renamed as the _.env_ file. Programs that access messages in
+mailstore format should wait for the presence of both a _.msg_ and a _.env_
+file before accessing either of them. An alternative approach is to wait for
+the absence of a _.tmp_ file.
+
+The envelope file starts with any text defined by the %mailstore_prefix%
+option, expanded and terminated by a newline if there isn't one. Then follows
+the sender address on one line, then all the recipient addresses, one per line.
+There can be more than one recipient only if the %batch_max% option is set
+greater than one. Finally, %mailstore_suffix% is expanded and the result
+appended to the file, followed by a newline if it does not end with one.
+
+If expansion of %mailstore_prefix% or %mailstore_suffix% ends with a forced
+failure, it is ignored. Other expansion errors are treated as serious
+configuration errors, and delivery is deferred.
+
+
+
+Non-special new file delivery
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+If neither %maildir_format% nor %mailstore_format% is set, a single new file
+is created directly in the named directory. For example, when delivering
+messages into files in batched SMTP format for later delivery to some host (see
+section <<SECTbatchSMTP>>), a setting such as
+
+ directory = /var/bsmtp/$host
+
+might be used. A message is written to a file with a temporary name, which is
+then renamed when the delivery is complete. The final name is obtained by
+expanding the contents of the %directory_file% option.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The autoreply transport
+-----------------------
+cindex:[transports,^autoreply^]
+cindex:[^autoreply^ transport]
+The ^autoreply^ transport is not a true transport in that it does not cause
+the message to be transmitted. Instead, it generates a new mail message.
+
+If the router that passes the message to this transport does not have the
+%unseen% option set, the original message (for the current recipient) is not
+delivered anywhere. However, when the %unseen% option is set on the router that
+passes the message to this transport, routing of the address continues, so
+another router can set up a normal message delivery.
+
+
+The ^autoreply^ transport is usually run as the result of mail filtering, a
+``vacation'' message being the standard example. However, it can also be run
+directly from a router like any other transport. To reduce the possibility of
+message cascades, messages created by the ^autoreply^ transport always have
+empty envelope sender addresses, like bounce messages.
+
+The parameters of the message to be sent can be specified in the configuration
+by options described below. However, these are used only when the address
+passed to the transport does not contain its own reply information. When the
+transport is run as a consequence of a
+%mail%
+or %vacation% command in a filter file, the parameters of the message are
+supplied by the filter, and passed with the address. The transport's options
+that define the message are then ignored (so they are not usually set in this
+case). The message is specified entirely by the filter or by the transport; it
+is never built from a mixture of options. However, the %file_optional%,
+%mode%, and %return_message% options apply in all cases.
+
+^Autoreply^ is implemented as a local transport. When used as a result of a
+command in a user's filter file, ^autoreply^ normally runs under the uid and
+gid of the user, and with appropriate current and home directories (see chapter
+<<CHAPenvironment>>).
+
+There is a subtle difference between routing a message to a ^pipe^ transport
+that generates some text to be returned to the sender, and routing it to an
+^autoreply^ transport. This difference is noticeable only if more than one
+address from the same message is so handled. In the case of a pipe, the
+separate outputs from the different addresses are gathered up and returned to
+the sender in a single message, whereas if ^autoreply^ is used, a separate
+message is generated for each address that is passed to it.
+
+Non-printing characters are not permitted in the header lines generated for the
+message that ^autoreply^ creates, with the exception of newlines that are
+immediately followed by whitespace. If any non-printing characters are found,
+the transport defers.
+Whether characters with the top bit set count as printing characters or not is
+controlled by the %print_topbitchars% global option.
+
+If any of the generic options for manipulating headers (for example,
+%headers_add%) are set on an ^autoreply^ transport, they apply to the copy of
+the original message that is included in the generated message when
+%return_message% is set. They do not apply to the generated message itself.
+
+If the ^autoreply^ transport receives return code 2 from Exim when it submits
+the message, indicating that there were no recipients, it does not treat this
+as an error. This means that autoreplies sent to $sender_address$ when this
+is empty (because the incoming message is a bounce message) do not cause
+problems. They are just discarded.
+
+
+
+Private options for autoreply
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^autoreply^ transport]
+
+oindex:[%bcc%]
+`..'=
+%bcc%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies the addresses that are to receive ``blind carbon copies'' of the
+message when the message is specified by the transport.
+
+
+oindex:[%cc%]
+`..'=
+%cc%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies recipients of the message and the contents of the 'Cc:' header
+when the message is specified by the transport.
+
+
+oindex:[%file%]
+`..'=
+%file%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+The contents of the file are sent as the body of the message when the message
+is specified by the transport. If both %file% and %text% are set, the text
+string comes first.
+
+
+oindex:[%file_expand%]
+`..'=
+%file_expand%, Use: 'autoreply', Type: 'boolean', Default: 'false'
+===
+
+If this is set, the contents of the file named by the %file% option are
+subjected to string expansion as they are added to the message.
+
+
+oindex:[%file_optional%]
+`..'=
+%file_optional%, Use: 'autoreply', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, no error is generated if the file named by the %file%
+option or passed with the address does not exist or cannot be read.
+
+
+oindex:[%from%]
+`..'=
+%from%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies the contents of the 'From:' header when the message is specified
+by the transport.
+
+
+oindex:[%headers%]
+`..'=
+%headers%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies additional RFC 2822 headers that are to be added to the message when
+the message is specified by the transport. Several can be given by using ``\n''
+to separate them. There is no check on the format.
+
+
+oindex:[%log%]
+`..'=
+%log%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This option names a file in which a record of every message sent is logged when
+the message is specified by the transport.
+
+
+oindex:[%mode%]
+`..'=
+%mode%, Use: 'autoreply', Type: 'octal integer', Default: '0600'
+===
+
+If either the log file or the ``once'' file has to be created, this mode is used.
+
+
+oindex:[%never_mail%]
+`..'=
+%never_mail%, Use: 'autoreply', Type: 'address list'!!, Default: 'unset'
+===
+
+If any run of the transport creates a message with a recipient that matches any
+item in the list, that recipient is quietly discarded. If all recipients are
+discarded, no message is created.
+
+
+
+oindex:[%once%]
+`..'=
+%once%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This option names a file or DBM database in which a record of each
+'To:' recipient is kept when the message is specified by the transport.
+*Note*: This does not apply to 'Cc:' or 'Bcc:' recipients.
+If %once_file_size% is not set, a DBM database is used, and it is allowed to
+grow as large as necessary. If a potential recipient is already in the
+database, no message is sent by default. However, if %once_repeat% specifies a
+time greater than zero, the message is sent if that much time has elapsed since
+a message was last sent to this recipient. If %once% is unset, the message is
+always sent.
+
+If %once_file_size% is set greater than zero, it changes the way Exim
+implements the %once% option. Instead of using a DBM file to record every
+recipient it sends to, it uses a regular file, whose size will never get larger
+than the given value. In the file, it keeps a linear list of recipient
+addresses and times at which they were sent messages. If the file is full when
+a new address needs to be added, the oldest address is dropped. If
+%once_repeat% is not set, this means that a given recipient may receive
+multiple messages, but at unpredictable intervals that depend on the rate of
+turnover of addresses in the file. If %once_repeat% is set, it specifies a
+maximum time between repeats.
+
+
+oindex:[%once_file_size%]
+`..'=
+%once_file_size%, Use: 'autoreply', Type: 'integer', Default: '0'
+===
+
+See %once% above.
+
+
+oindex:[%once_repeat%]
+`..'=
+%once_repeat%, Use: 'autoreply', Type: 'time'!!, Default: '0s'
+===
+
+See %once% above.
+After expansion, the value of this option must be a valid time value.
+
+
+oindex:[%reply_to%]
+`..'=
+%reply_to%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies the contents of the 'Reply-To:' header when the message is
+specified by the transport.
+
+
+oindex:[%return_message%]
+`..'=
+%return_message%, Use: 'autoreply', Type: 'boolean', Default: 'false'
+===
+
+If this is set, a copy of the original message is returned with the new
+message, subject to the maximum size set in the %return_size_limit% global
+configuration option.
+
+
+oindex:[%subject%]
+`..'=
+%subject%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies the contents of the 'Subject:' header when the message is
+specified by the transport.
+
+It is tempting to quote the original subject in automatic responses. For
+example:
+
+ subject = Re: $h_subject:
+
+There is a danger in doing this, however. It may allow a third party to
+subscribe your users to an opt-in mailing list, provided that the list accepts
+bounce messages as subscription confirmations. Well-managed lists require a
+non-bounce message to confirm a subscription, so the danger is relatively
+small.
+
+
+
+oindex:[%text%]
+`..'=
+%text%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies a single string to be used as the body of the message when the
+message is specified by the transport. If both %text% and %file% are set, the
+text comes first.
+
+
+oindex:[%to%]
+`..'=
+%to%, Use: 'autoreply', Type: 'string'!!, Default: 'unset'
+===
+
+This specifies recipients of the message and the contents of the 'To:' header
+when the message is specified by the transport.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPLMTP]]
+The lmtp transport
+------------------
+cindex:[transports,^lmtp^]
+cindex:[^lmtp^ transport]
+cindex:[LMTP,over a pipe]
+cindex:[LMTP,over a socket]
+The ^lmtp^ transport runs the LMTP protocol (RFC 2033) over a pipe to a
+specified command
+or by interacting with a Unix domain socket.
+This transport is something of a cross between the ^pipe^ and ^smtp^
+transports. Exim also has support for using LMTP over TCP/IP; this is
+implemented as an option for the ^smtp^ transport. Because LMTP is expected
+to be of minority interest, the default build-time configure in _src/EDITME_
+has it commented out. You need to ensure that
+
+ TRANSPORT_LMTP=yes
+
+is present in your _Local/Makefile_ in order to have the ^lmtp^ transport
+included in the Exim binary.
+
+cindex:[options,^lmtp^ transport]
+The private options of the ^lmtp^ transport are as follows:
+
+oindex:[%batch_id%]
+`..'=
+%batch_id%, Use: 'lmtp', Type: 'string'!!, Default: 'unset'
+===
+
+See the description of local delivery batching in chapter <<CHAPbatching>>.
+
+
+oindex:[%batch_max%]
+`..'=
+%batch_max%, Use: 'lmtp', Type: 'integer', Default: '1'
+===
+
+This limits the number of addresses that can be handled in a single delivery.
+Most LMTP servers can handle several addresses at once, so it is normally a
+good idea to increase this value. See the description of local delivery
+batching in chapter <<CHAPbatching>>.
+
+
+oindex:[%command%]
+`..'=
+%command%, Use: 'lmtp', Type: 'string'!!, Default: 'unset'
+===
+
+This option must be set if %socket% is not set.
+The string is a command which is run in a separate process. It is split up into
+a command name and list of arguments, each of which is separately expanded (so
+expansion cannot change the number of arguments). The command is run directly,
+not via a shell. The message is passed to the new process using the standard
+input and output to operate the LMTP protocol.
+
+
+oindex:[%socket%]
+`..'=
+%socket%, Use: 'lmtp', Type: 'string'!!, Default: 'unset'
+===
+
+This option must be set if %command% is not set. The result of expansion must
+be the name of a Unix domain socket. The transport connects to the socket and
+delivers the message to it using the LMTP protocol.
+
+
+oindex:[%timeout%]
+`..'=
+%timeout%, Use: 'lmtp', Type: 'time', Default: '5m'
+===
+
+The transport is aborted if the created process
+or Unix domain socket
+does not respond to LMTP commands or message input within this timeout.
+
+
+Here is an example of a typical LMTP transport:
+
+ lmtp:
+ driver = lmtp
+ command = /some/local/lmtp/delivery/program
+ batch_max = 20
+ user = exim
+
+This delivers up to 20 addresses at a time, in a mixture of domains if
+necessary, running as the user 'exim'.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPpipetransport]]
+The pipe transport
+------------------
+cindex:[transports,^pipe^]
+cindex:[^pipe^ transport]
+The ^pipe^ transport is used to deliver messages via a pipe to a command
+running in another process.
+
+One example is the
+use of ^pipe^ as a pseudo-remote transport for passing messages to some other
+delivery mechanism (such as UUCP). Another is the use by individual users to
+automatically process their incoming messages. The ^pipe^ transport can be
+used in one of the following ways:
+
+- A router routes one address to a transport in the normal way, and the transport
+is configured as a ^pipe^ transport. In this case, $local_part$ contains
+the local part of the address (as usual), and the command that is run is
+specified by the %command% option on the transport.
+
+- If the %batch_max% option is set greater than 1 (the default), the transport
+can be called upon to handle more than one address in a single run. In this
+case, $local_part$ is not set (because it is not unique). However, the
+pseudo-variable $pipe_addresses$ (described in section <<SECThowcommandrun>>
+below) contains all the addresses that are being handled.
+
+- A router redirects an address directly to a pipe command (for example, from an
+alias or forward file). In this case, $local_part$ contains the local part
+that was redirected, and $address_pipe$ contains the text of the pipe
+command itself. The %command% option on the transport is ignored.
+
+
+The ^pipe^ transport is a non-interactive delivery method. Exim can also
+deliver messages over pipes using the LMTP interactive protocol. This is
+implemented by the ^lmtp^ transport.
+
+In the case when ^pipe^ is run as a consequence of an entry in a local user's
+_.forward_ file, the command runs under the uid and gid of that user. In
+other cases, the uid and gid have to be specified explicitly, either on the
+transport or on the router that handles the address. Current and ``home''
+directories are also controllable. See chapter <<CHAPenvironment>> for details of
+the local delivery environment.
+
+
+
+Concurrent delivery
+~~~~~~~~~~~~~~~~~~~
+If two messages arrive at almost the same time, and both are routed to a pipe
+delivery, the two pipe transports may be run concurrently. You must ensure that
+any pipe commands you set up are robust against this happening. If the commands
+write to a file, the %exim_lock% utility might be of use.
+
+
+
+
+Returned status and data
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[^pipe^ transport,returned data]
+If the command exits with a non-zero return code, the delivery is deemed to
+have failed, unless either the %ignore_status% option is set (in which case
+the return code is treated as zero), or the return code is one of those listed
+in the %temp_errors% option, which are interpreted as meaning ``try again
+later''. In this case, delivery is deferred. Details of a permanent failure are
+logged, but are not included in the bounce message, which merely contains
+``local delivery failed''.
+
+If the return code is greater than 128 and the command being run is a shell
+script, it normally means that the script was terminated by a signal whose
+value is the return code minus 128.
+
+If Exim is unable to run the command (that is, if 'execve()' fails), the
+return code is set to 127. This is the value that a shell returns if it is
+asked to run a non-existent command. The wording for the log line suggests that
+a non-existent command may be the problem.
+
+The %return_output% option can affect the result of a pipe delivery. If it is
+set and the command produces any output on its standard output or standard
+error streams, the command is considered to have failed, even if it gave a zero
+return code or if %ignore_status% is set. The output from the command is
+included as part of the bounce message. The %return_fail_output% option is
+similar, except that output is returned only when the command exits with a
+failure return code, that is, a value other than zero or a code that matches
+%temp_errors%.
+
+
+
+[[SECThowcommandrun]]
+How the command is run
+~~~~~~~~~~~~~~~~~~~~~~
+cindex:[^pipe^ transport,path for command]
+The command line is (by default) broken down into a command name and arguments
+by the ^pipe^ transport itself. The %allow_commands% and %restrict_to_path%
+options can be used to restrict the commands that may be run.
+
+cindex:[quoting,in pipe command]
+Unquoted arguments are delimited by white space. If an argument appears in
+double quotes, backslash is interpreted as an escape character in the usual
+way. If an argument appears in single quotes, no escaping is done.
+
+String expansion is applied to the command line except when it comes from a
+traditional _.forward_ file (commands from a filter file are expanded). The
+expansion is applied to each argument in turn rather than to the whole line.
+For this reason, any string expansion item that contains white space must be
+quoted so as to be contained within a single argument. A setting such as
+
+ command = /some/path ${if eq{$local_part}{postmaster}{xxx}{yyy}}
+
+will not work, because the expansion item gets split between several
+arguments. You have to write
+
+ command = /some/path "${if eq{$local_part}{postmaster}{xxx}{yyy}}"
+
+to ensure that it is all in one argument. The expansion is done in this way,
+argument by argument, so that the number of arguments cannot be changed as a
+result of expansion, and quotes or backslashes in inserted variables do not
+interact with external quoting.
+
+cindex:[transport,filter]
+cindex:[filter,transport filter]
+Special handling takes place when an argument consists of precisely the text
+`\$pipe_addresses\}`. This is not a general expansion variable; the only
+place this string is recognized is when it appears as an argument for a pipe or
+transport filter command. It causes each address that is being handled to be
+inserted in the argument list at that point 'as a separate argument'. This
+avoids any problems with spaces or shell metacharacters, and is of use when a
+^pipe^ transport is handling groups of addresses in a batch.
+
+After splitting up into arguments and expansion, the resulting command is run
+in a subprocess directly from the transport, 'not' under a shell. The
+message that is being delivered is supplied on the standard input, and the
+standard output and standard error are both connected to a single pipe that is
+read by Exim. The %max_output% option controls how much output the command may
+produce, and the %return_output% and %return_fail_output% options control
+what is done with it.
+
+Not running the command under a shell (by default) lessens the security risks
+in cases when a command from a user's filter file is built out of data that was
+taken from an incoming message. If a shell is required, it can of course be
+explicitly specified as the command to be run. However, there are circumstances
+where existing commands (for example, in _.forward_ files) expect to be run
+under a shell and cannot easily be modified. To allow for these cases, there is
+an option called %use_shell%, which changes the way the ^pipe^ transport
+works. Instead of breaking up the command line as just described, it expands it
+as a single string and passes the result to _/bin/sh_. The
+%restrict_to_path% option and the $pipe_addresses$ facility cannot be used
+with %use_shell%, and the whole mechanism is inherently less secure.
+
+
+
+[[SECTpipeenv]]
+Environment variables
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[^pipe^ transport,environment for command]
+cindex:[environment for pipe transport]
+The environment variables listed below are set up when the command is invoked.
+This list is a compromise for maximum compatibility with other MTAs. Note that
+the %environment% option can be used to add additional variables to this
+environment.
+
+&&&
+`DOMAIN ` the domain of the address
+`HOME ` the home directory, if set
+`HOST ` the host name when called from a router (see below)
+`LOCAL_PART ` see below
+`LOCAL_PART_PREFIX ` see below
+`LOCAL_PART_SUFFIX ` see below
+`LOGNAME ` see below
+`MESSAGE_ID ` the message's id
+`PATH ` as specified by the %path% option below
+`QUALIFY_DOMAIN ` the sender qualification domain
+`RECIPIENT ` the complete recipient address
+`SENDER ` the sender of the message (empty if a bounce)
+`SHELL ` `/bin/sh`
+`TZ ` the value of the %timezone% option, if set
+`USER ` see below
+&&&
+
+When a ^pipe^ transport is called directly from (for example) an ^accept^
+router, LOCAL_PART is set to the local part of the address. When it is
+called as a result of a forward or alias expansion, LOCAL_PART is set to
+the local part of the address that was expanded. In both cases, any affixes are
+removed from the local part, and made available in LOCAL_PART_PREFIX and
+LOCAL_PART_SUFFIX, respectively. LOGNAME and USER are set to the
+same value as LOCAL_PART for compatibility with other MTAs.
+
+cindex:[HOST]
+HOST is set only when a ^pipe^ transport is called from a router that
+associates hosts with an address, typically when using ^pipe^ as a
+pseudo-remote transport. HOST is set to the first host name specified by
+the router.
+
+cindex:[HOME]
+If the transport's generic %home_directory% option is set, its value is used
+for the HOME environment variable. Otherwise, a home directory may be set
+by the router's %transport_home_directory% option, which defaults to the
+user's home directory if %check_local_user% is set.
+
+
+Private options for pipe
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^pipe^ transport]
+
+
+
+oindex:[%allow_commands%]
+`..'=
+%allow_commands%, Use: 'pipe', Type: 'string list'!!, Default: 'unset'
+===
+
+cindex:[^pipe^ transport,permitted commands]
+The string is expanded, and is then interpreted as a colon-separated list of
+permitted commands. If %restrict_to_path% is not set, the only commands
+permitted are those in the %allow_commands% list. They need not be absolute
+paths; the %path% option is still used for relative paths. If
+%restrict_to_path% is set with %allow_commands%, the command must either be
+in the %allow_commands% list, or a name without any slashes that is found on
+the path. In other words, if neither %allow_commands% nor %restrict_to_path%
+is set, there is no restriction on the command, but otherwise only commands
+that are permitted by one or the other are allowed. For example, if
+
+ allow_commands = /usr/bin/vacation
+
+and %restrict_to_path% is not set, the only permitted command is
+_/usr/bin/vacation_. The %allow_commands% option may not be set if
+%use_shell% is set.
+
+
+oindex:[%batch_id%]
+`..'=
+%batch_id%, Use: 'pipe', Type: 'string'!!, Default: 'unset'
+===
+
+See the description of local delivery batching in chapter <<CHAPbatching>>.
+
+
+oindex:[%batch_max%]
+`..'=
+%batch_max%, Use: 'pipe', Type: 'integer', Default: '1'
+===
+
+This limits the number of addresses that can be handled in a single delivery.
+See the description of local delivery batching in chapter <<CHAPbatching>>.
+
+
+oindex:[%check_string%]
+`..'=
+%check_string%, Use: 'pipe', Type: 'string', Default: 'unset'
+===
+
+As ^pipe^ writes the message, the start of each line is tested for matching
+%check_string%, and if it does, the initial matching characters are replaced
+by the contents of %escape_string%, provided both are set. The value of
+%check_string% is a literal string, not a regular expression, and the case of
+any letters it contains is significant. When %use_bsmtp% is set, the contents
+of %check_string% and %escape_string% are forced to values that implement the
+SMTP escaping protocol. Any settings made in the configuration file are
+ignored.
+
+
+oindex:[%command%]
+`..'=
+%command%, Use: 'pipe', Type: 'string'!!, Default: 'unset'
+===
+
+This option need not be set when ^pipe^ is being used to deliver to pipes
+obtained directly from address redirections. In other cases, the option must be
+set, to provide a command to be run. It need not yield an absolute path (see
+the %path% option below). The command is split up into separate arguments by
+Exim, and each argument is separately expanded, as described in section
+<<SECThowcommandrun>> above.
+
+
+oindex:[%environment%]
+`..'=
+%environment%, Use: 'pipe', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[^pipe^ transport,environment for command]
+cindex:[environment for ^pipe^ transport]
+This option is used to add additional variables to the environment in which the
+command runs (see section <<SECTpipeenv>> for the default list). Its value is a
+string which is expanded, and then interpreted as a colon-separated list of
+environment settings of the form ``<''name'>=<'value'>'.
+
+
+oindex:[%escape_string%]
+`..'=
+%escape_string%, Use: 'pipe', Type: 'string', Default: 'unset'
+===
+
+See %check_string% above.
+
+
+oindex:[%freeze_exec_fail%]
+`..'=
+%freeze_exec_fail%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+cindex:[exec failure]
+cindex:[failure of exec]
+cindex:[^pipe^ transport,failure of exec]
+Failure to exec the command in a pipe transport is by default treated like
+any other failure while running the command. However, if %freeze_exec_fail%
+is set, failure to exec is treated specially, and causes the message to be
+frozen, whatever the setting of %ignore_status%.
+
+
+oindex:[%ignore_status%]
+`..'=
+%ignore_status%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, the status returned by the subprocess that is set up to
+run the command is ignored, and Exim behaves as if zero had been returned.
+Otherwise, a non-zero status
+or termination by signal
+causes an error return from the transport unless the status value is one of
+those listed in %temp_errors%; these cause the delivery to be deferred and
+tried again later.
+
+
+oindex:[%log_defer_output%]
+`..'=
+%log_defer_output%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+cindex:[^pipe^ transport,logging output]
+If this option is set, and the status returned by the command is
+one of the codes listed in %temp_errors% (that is, delivery was deferred),
+and any output was produced, the first line of it is written to the main log.
+
+
+oindex:[%log_fail_output%]
+`..'=
+%log_fail_output%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+If this option is set, and the command returns any output, and also ends with a
+return code that is neither zero nor one of the return codes listed in
+%temp_errors% (that is, the delivery failed), the first line of output is
+written to the main log.
+
+This option and %log_output% are mutually exclusive. Only one of them may be
+set.
+
+
+
+oindex:[%log_output%]
+`..'=
+%log_output%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+If this option is set and the command returns any output, the first line of
+output is written to the main log, whatever the return code.
+
+This option and %log_fail_output% are mutually exclusive. Only one of them
+may be set.
+
+
+
+oindex:[%max_output%]
+`..'=
+%max_output%, Use: 'pipe', Type: 'integer', Default: '20K'
+===
+
+This specifies the maximum amount of output that the command may produce on its
+standard output and standard error file combined. If the limit is exceeded, the
+process running the command is killed. This is intended as a safety measure to
+catch runaway processes. The limit is applied independently of the settings of
+the options that control what is done with such output (for example,
+%return_output%). Because of buffering effects, the amount of output may
+exceed the limit by a small amount before Exim notices.
+
+
+oindex:[%message_prefix%]
+`..'=
+%message_prefix%, Use: 'pipe', Type: 'string'!!, Default: 'see below'
+===
+
+The string specified here is expanded and output at the start of every message.
+The default is unset if %use_bsmtp% is set. Otherwise it is
+
+....
+message_prefix = \
+ From ${if def:return_path{$return_path}{MAILER-DAEMON}}\
+ ${tod_bsdinbox}\n
+....
+
+cindex:[Cyrus]
+cindex:[%tmail%]
+cindex:[``From'' line]
+This is required by the commonly used _/usr/bin/vacation_ program.
+However, it must 'not' be present if delivery is to the Cyrus IMAP server,
+or to the %tmail% local delivery agent. The prefix can be suppressed by setting
+
+ message_prefix =
+
+
+
+oindex:[%message_suffix%]
+`..'=
+%message_suffix%, Use: 'pipe', Type: 'string'!!, Default: 'see below'
+===
+
+The string specified here is expanded and output at the end of every message.
+The default is unset if %use_bsmtp% is set. Otherwise it is a single newline.
+The suffix can be suppressed by setting
+
+ message_suffix =
+
+
+
+oindex:[%path%]
+`..'=
+%path%, Use: 'pipe', Type: 'string', Default: `/usr/bin`
+===
+
+This option specifies the string that is set up in the PATH environment
+variable of the subprocess. If the %command% option does not yield an absolute
+path name, the command is sought in the PATH directories, in the usual way.
+*Warning*: This does not apply to a command specified as a transport
+filter.
+
+
+oindex:[%pipe_as_creator%]
+`..'=
+%pipe_as_creator%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+cindex:[uid (user id),local delivery]
+If the generic %user% option is not set and this option is true, the delivery
+process is run under the uid that was in force when Exim was originally called
+to accept the message. If the group id is not otherwise set (via the generic
+%group% option), the gid that was in force when Exim was originally called to
+accept the message is used.
+
+
+oindex:[%restrict_to_path%]
+`..'=
+%restrict_to_path%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+When this option is set, any command name not listed in %allow_commands% must
+contain no slashes. The command is searched for only in the directories listed
+in the %path% option. This option is intended for use in the case when a pipe
+command has been generated from a user's _.forward_ file. This is usually
+handled by a ^pipe^ transport called %address_pipe%.
+
+
+oindex:[%return_fail_output%]
+`..'=
+%return_fail_output%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, and the command produced any output and ended with a
+return code other than zero or one of the codes listed in %temp_errors% (that
+is, the delivery failed), the output is returned in the bounce message.
+However, if the message has a null sender (that is, it is itself a bounce
+message), output from the command is discarded.
+
+This option and %return_output% are mutually exclusive. Only one of them may
+be set.
+
+
+
+oindex:[%return_output%]
+`..'=
+%return_output%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+If this option is true, and the command produced any output, the delivery is
+deemed to have failed whatever the return code from the command, and the output
+is returned in the bounce message. Otherwise, the output is just discarded.
+However, if the message has a null sender (that is, it is a bounce message),
+output from the command is always discarded, whatever the setting of this
+option.
+
+This option and %return_fail_output% are mutually exclusive. Only one of them
+may be set.
+
+
+
+oindex:[%temp_errors%]
+`..'=
+%temp_errors%, Use: 'pipe', Type: 'string list', Default: 'see below'
+===
+
+cindex:[^pipe^ transport,temporary failure]
+This option contains either a colon-separated list of numbers, or a single
+asterisk. If %ignore_status% is false
+and %return_output% is not set,
+and the command exits with a non-zero return code, the failure is treated as
+temporary and the delivery is deferred if the return code matches one of the
+numbers, or if the setting is a single asterisk. Otherwise, non-zero return
+codes are treated as permanent errors. The default setting contains the codes
+defined by EX_TEMPFAIL and EX_CANTCREAT in _sysexits.h_. If Exim is
+compiled on a system that does not define these macros, it assumes values of 75
+and 73, respectively.
+
+
+oindex:[%timeout%]
+`..'=
+%timeout%, Use: 'pipe', Type: 'time', Default: '1h'
+===
+
+If the command fails to complete within this time, it is killed. This normally
+causes the delivery to fail. A zero time interval specifies no timeout. In
+order to ensure that any subprocesses created by the command are also killed,
+Exim makes the initial process a process group leader, and kills the whole
+process group on a timeout. However, this can be defeated if one of the
+processes starts a new process group.
+
+
+oindex:[%umask%]
+`..'=
+%umask%, Use: 'pipe', Type: 'octal integer', Default: '022'
+===
+
+This specifies the umask setting for the subprocess that runs the command.
+
+
+oindex:[%use_bsmtp%]
+`..'=
+%use_bsmtp%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+cindex:[envelope sender]
+If this option is set true, the ^pipe^ transport writes messages in ``batch
+SMTP'' format, with the envelope sender and recipient(s) included as SMTP
+commands. If you want to include a leading HELO command with such messages,
+you can do so by setting the %message_prefix% option. See section
+<<SECTbatchSMTP>> for details of batch SMTP.
+
+
+oindex:[%use_crlf%]
+`..'=
+%use_crlf%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+cindex:[carriage return]
+cindex:[linefeed]
+This option causes lines to be terminated with the two-character CRLF sequence
+(carriage return, linefeed) instead of just a linefeed character. In the case
+of batched SMTP, the byte sequence written to the pipe is then an exact image
+of what would be sent down a real SMTP connection.
+
+The contents of the %message_prefix% and %message_suffix% options are written
+verbatim, so must contain their own carriage return characters if these are
+needed. Since the default values for both %message_prefix% and
+%message_suffix% end with a single linefeed, their values
+must
+be changed to end with `\r\n` if %use_crlf% is set.
+
+
+oindex:[%use_shell%]
+`..'=
+%use_shell%, Use: 'pipe', Type: 'boolean', Default: 'false'
+===
+
+If this option is set, it causes the command to be passed to _/bin/sh_
+instead of being run directly from the transport, as described in section
+<<SECThowcommandrun>>. This is less secure, but is needed in some situations
+where the command is expected to be run under a shell and cannot easily be
+modified. The %allow_commands% and %restrict_to_path% options, and the
+`\$pipe_addresses` facility are incompatible with %use_shell%. The
+command is expanded as a single string, and handed to _/bin/sh_ as data for
+its %-c% option.
+
+
+
+Using an external local delivery agent
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[local delivery,using an external agent]
+cindex:['procmail']
+cindex:[external local delivery]
+cindex:[delivery,'procmail']
+cindex:[delivery,by external agent]
+The ^pipe^ transport can be used to pass all messages that require local
+delivery to a separate local delivery agent such as %procmail%. When doing
+this, care must be taken to ensure that the pipe is run under an appropriate
+uid and gid. In some configurations one wants this to be a uid that is trusted
+by the delivery agent to supply the correct sender of the message. It may be
+necessary to recompile or reconfigure the delivery agent so that it trusts an
+appropriate user. The following is an example transport and router
+configuration for %procmail%:
+
+ # transport
+ procmail_pipe:
+ driver = pipe
+ command = /usr/local/bin/procmail -d $local_part
+ return_path_add
+ delivery_date_add
+ envelope_to_add
+ check_string = "From "
+ escape_string = ">From "
+ user = $local_part
+ group = mail
+
+ # router
+ procmail:
+ driver = accept
+ check_local_user
+ transport = procmail_pipe
+
+
+In this example, the pipe is run as the local user, but with the group set to
+'mail'. An alternative is to run the pipe as a specific user such as 'mail'
+or 'exim', but in this case you must arrange for %procmail% to trust that
+user to supply a correct sender address. If you do not specify either a %group%
+or a %user% option, the pipe command is run as the local user. The home
+directory is the user's home directory by default.
+
+Note that the command that the pipe transport runs does 'not' begin with
+
+ IFS=" "
+
+as shown in the %procmail% documentation, because Exim does not by default use
+a shell to run pipe commands.
+
+cindex:[Cyrus]
+The next example shows a transport and a router for a system where local
+deliveries are handled by the Cyrus IMAP server.
+
+....
+# transport
+local_delivery_cyrus:
+ driver = pipe
+ command = /usr/cyrus/bin/deliver \
+ -m ${substr_1:$local_part_suffix} -- $local_part
+ user = cyrus
+ group = mail
+ return_output
+ log_output
+ message_prefix =
+ message_suffix =
+
+# router
+local_user_cyrus:
+ driver = accept
+ check_local_user
+ local_part_suffix = .*
+ transport = local_delivery_cyrus
+....
+
+Note the unsetting of %message_prefix% and %message_suffix%, and the use of
+%return_output% to cause any text written by Cyrus to be returned to the
+sender.
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPsmtptrans]]
+The smtp transport
+------------------
+cindex:[transports,^smtp^]
+cindex:[^smtp^ transport]
+The ^smtp^ transport delivers messages over TCP/IP connections using the SMTP
+or LMTP protocol. The list of hosts to try can either be taken from the address
+that is being processed (having been set up by the router), or specified
+explicitly for the transport. Timeout and retry processing (see chapter
+<<CHAPretry>>) is applied to each IP address independently.
+
+
+Multiple messages on a single connection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The sending of multiple messages over a single TCP/IP connection can arise in
+two ways:
+
+- If a message contains more than %max_rcpt% (see below) addresses that are
+routed to the same host, more than one copy of the message has to be sent to
+that host. In this situation, multiple copies may be sent in a single run of
+the ^smtp^ transport over a single TCP/IP connection. (What Exim actually does
+when it has too many addresses to send in one message also depends on the value
+of the global %remote_max_parallel% option. Details are given in section
+<<SECToutSMTPTCP>>.)
+
+- cindex:[hints database,remembering routing]
+When a message has been successfully delivered over a TCP/IP connection, Exim
+looks in its hints database to see if there are any other messages awaiting a
+connection to the same host. If there are, a new delivery process is started
+for one of them, and the current TCP/IP connection is passed on to it. The new
+process may in turn send multiple copies and possibly create yet another
+process.
+
+
+For each copy sent over the same TCP/IP connection, a sequence counter is
+incremented, and if it ever gets to the value of %connection_max_messages%,
+no further messages are sent over that connection.
+
+
+
+Use of the \$host variable
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[$host$]
+cindex:[$host_address$]
+At the start of a run of the ^smtp^ transport, the values of $host$ and
+$host_address$ are the name and IP address of the first host on the host list
+passed by the router. However, when the transport is about to connect to a
+specific host, and while it is connected to that host, $host$ and
+$host_address$ are set to the values for that host. These are the values
+that are in force when the %helo_data%, %hosts_try_auth%, %interface%,
+%serialize_hosts%, and the various TLS options are expanded.
+
+
+
+Private options for smtp
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^smtp^ transport]
+The private options of the ^smtp^ transport are as follows:
+
+
+oindex:[%allow_localhost%]
+`..'=
+%allow_localhost%, Use: 'smtp', Type: 'boolean', Default: 'false'
+===
+
+cindex:[local host,sending to]
+cindex:[fallback,hosts specified on transport]
+When a host specified in %hosts% or %fallback_hosts% (see below) turns out to
+be the local host, or is listed in %hosts_treat_as_local%, delivery is
+deferred by default. However, if %allow_localhost% is set, Exim goes on to do
+the delivery anyway. This should be used only in special cases when the
+configuration ensures that no looping will result (for example, a differently
+configured Exim is listening on the port to which the message is sent).
+
+
+oindex:[%authenticated_sender%]
+`..'=
+%authenticated_sender%, Use: 'smtp', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[Cyrus]
+When Exim has authenticated as a client, this option sets a value for the
+AUTH= item on outgoing MAIL commands, overriding any existing
+authenticated sender value. If the string expansion is forced to fail, the
+option is ignored. Other expansion failures cause delivery to be deferred. If
+the result of expansion is an empty string, that is also ignored.
+
+If the SMTP session is not authenticated, the expansion of
+%authenticated_sender% still happens (and can cause the delivery to be
+deferred if it fails), but no AUTH= item is added to MAIL commands.
+
+This option allows you to use the ^smtp^ transport in LMTP mode to
+deliver mail to Cyrus IMAP and provide the proper local part as the
+``authenticated sender'', via a setting such as:
+
+ authenticated_sender = $local_part
+
+This removes the need for IMAP subfolders to be assigned special ACLs to
+allow direct delivery to those subfolders.
+
+Because of expected uses such as that just described for Cyrus (when no
+domain is involved), there is no checking on the syntax of the provided
+value.
+
+
+oindex:[%command_timeout%]
+`..'=
+%command_timeout%, Use: 'smtp', Type: 'time', Default: '5m'
+===
+
+This sets a timeout for receiving a response to an SMTP command that has been
+sent out. It is also used when waiting for the initial banner line from the
+remote host. Its value must not be zero.
+
+
+oindex:[%connect_timeout%]
+`..'=
+%connect_timeout%, Use: 'smtp', Type: 'time', Default: '5m'
+===
+
+This sets a timeout for the 'connect()' function, which sets up a TCP/IP call
+to a remote host. A setting of zero allows the system timeout (typically
+several minutes) to act. To have any effect, the value of this option must be
+less than the system timeout. However, it has been observed that on some
+systems there is no system timeout, which is why the default value for this
+option is 5 minutes, a value recommended by RFC 1123.
+
+
+oindex:[%connection_max_messages%]
+`..'=
+%connection_max_messages%, Use: 'smtp', Type: 'integer', Default: '500'
+===
+
+cindex:[SMTP,passed connection]
+cindex:[SMTP,multiple deliveries]
+cindex:[multiple SMTP deliveries]
+This controls the maximum number of separate message deliveries that are sent
+over a single TCP/IP connection. If the value is zero, there is no limit.
+For testing purposes, this value can be overridden by the %-oB% command line
+option.
+
+
+oindex:[%data_timeout%]
+`..'=
+%data_timeout%, Use: 'smtp', Type: 'time', Default: '5m'
+===
+
+This sets a timeout for the transmission of each block in the data portion of
+the message. As a result, the overall timeout for a message depends on the size
+of the message. Its value must not be zero. See also %final_timeout%.
+
+
+oindex:[%delay_after_cutoff%]
+`..'=
+%delay_after_cutoff%, Use: 'smtp', Type: 'boolean', Default: 'true'
+===
+
+This option controls what happens when all remote IP addresses for a given
+domain have been inaccessible for so long that they have passed their retry
+cutoff times.
+
+In the default state, if the next retry time has not been reached for any of
+them, the address is bounced without trying any deliveries. In other words,
+Exim delays retrying an IP address after the final cutoff time until a new
+retry time is reached, and can therefore bounce an address without ever trying
+a delivery, when machines have been down for a long time. Some people are
+unhappy at this prospect, so...
+
+If %delay_after_cutoff% is set false, Exim behaves differently. If all IP
+addresses are past their final cutoff time, Exim tries to deliver to those
+IP addresses that have not been tried since the message arrived. If there are
+none, of if they all fail, the address is bounced. In other words, it does not
+delay when a new message arrives, but immediately tries those expired IP
+addresses that haven't been tried since the message arrived. If there is a
+continuous stream of messages for the dead hosts, unsetting
+%delay_after_cutoff% means that there will be many more attempts to deliver
+to them.
+
+
+oindex:[%dns_qualify_single%]
+`..'=
+%dns_qualify_single%, Use: 'smtp', Type: 'boolean', Default: 'true'
+===
+
+If the %hosts% or %fallback_hosts% option is being used,
+and the %gethostbyname% option is false,
+the RES_DEFNAMES resolver option is set. See the %qualify_single% option
+in chapter <<CHAPdnslookup>> for more details.
+
+
+oindex:[%dns_search_parents%]
+`..'=
+%dns_search_parents%, Use: 'smtp', Type: 'boolean', Default: 'false'
+===
+
+cindex:[%search_parents%]
+If the %hosts% or %fallback_hosts% option is being used, and the
+%gethostbyname% option is false, the RES_DNSRCH resolver option is set.
+See the %search_parents% option in chapter <<CHAPdnslookup>> for more details.
+
+
+
+oindex:[%fallback_hosts%]
+`..'=
+%fallback_hosts%, Use: 'smtp', Type: 'string list', Default: 'unset'
+===
+
+cindex:[fallback,hosts specified on transport]
+String expansion is not applied to this option. The argument must be a
+colon-separated list of host names or IP addresses. Fallback hosts can also be
+specified on routers, which associate them with the addresses they process. As
+for the %hosts% option without %hosts_override%, %fallback_hosts% specified
+on the transport is used only if the address does not have its own associated
+fallback host list. Unlike %hosts%, a setting of %fallback_hosts% on an
+address is not overridden by %hosts_override%. However, %hosts_randomize%
+does apply to fallback host lists.
+
+If Exim is unable to deliver to any of the hosts for a particular address, and
+the errors are not permanent rejections, the address is put on a separate
+transport queue with its host list replaced by the fallback hosts, unless the
+address was routed via MX records and the current host was in the original MX
+list. In that situation, the fallback host list is not used.
+
+Once normal deliveries are complete, the fallback queue is delivered by
+re-running the same transports with the new host lists. If several failing
+addresses have the same fallback hosts (and %max_rcpt% permits it), a single
+copy of the message is sent.
+
+The resolution of the host names on the fallback list is controlled by the
+%gethostbyname% option, as for the %hosts% option. Fallback hosts apply
+both to cases when the host list comes with the address and when it is taken
+from %hosts%. This option provides a ``use a smart host only if delivery fails''
+facility.
+
+
+oindex:[%final_timeout%]
+`..'=
+%final_timeout%, Use: 'smtp', Type: 'time', Default: '10m'
+===
+
+This is the timeout that applies while waiting for the response to the final
+line containing just ``.'' that terminates a message. Its value must not be zero.
+
+
+oindex:[%gethostbyname%]
+`..'=
+%gethostbyname%, Use: 'smtp', Type: 'boolean', Default: 'false'
+===
+
+If this option is true when the %hosts% and/or %fallback_hosts% options are
+being used, names are looked up using 'gethostbyname()'
+(or 'getipnodebyname()' when available)
+instead of using the DNS. Of course, that function may in fact use the DNS, but
+it may also consult other sources of information such as _/etc/hosts_.
+
+oindex:[%helo_data%]
+`..'=
+%helo_data%, Use: 'smtp', Type: 'string'!!, Default: `\$primary_hostname`
+===
+
+cindex:[HELO argument, setting]
+cindex:[EHLO argument, setting]
+The value of this option is expanded, and used as the argument for the EHLO
+or HELO command that starts the outgoing SMTP session.
+
+
+oindex:[%hosts%]
+`..'=
+%hosts%, Use: 'smtp', Type: 'string list'!!, Default: 'unset'
+===
+
+Hosts are associated with an address by a router such as ^dnslookup^, which
+finds the hosts by looking up the address domain in the DNS. However, addresses
+can be passed to the ^smtp^ transport by any router, and not all of them can
+provide an associated host list. The %hosts% option specifies a list of hosts
+which are used if the address being processed does not have any hosts
+associated with it. The hosts specified by %hosts% are also used, whether or
+not the address has its own hosts, if %hosts_override% is set.
+
+The string is first expanded, before being interpreted as a colon-separated
+list of host names or IP addresses. If the expansion fails, delivery is
+deferred. Unless the failure was caused by the inability to complete a lookup,
+the error is logged to the panic log as well as the main log. Host names are
+looked up either by searching directly for address records in the DNS or by
+calling 'gethostbyname()'
+(or 'getipnodebyname()' when available),
+depending on the setting of the %gethostbyname% option. When Exim is compiled
+with IPv6 support, if a host that is looked up in the DNS has both IPv4 and
+IPv6 addresses, both types of address are used.
+
+During delivery, the hosts are tried in order, subject to their retry status,
+unless %hosts_randomize% is set.
+
+
+oindex:[%hosts_avoid_esmtp%]
+`..'=
+%hosts_avoid_esmtp%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[ESMTP, avoiding use of]
+cindex:[HELO,forcing use of]
+cindex:[EHLO,avoiding use of]
+cindex:[PIPELINING,avoiding the use of]
+This option is for use with broken hosts that announce ESMTP facilities (for
+example, PIPELINING) and then fail to implement them properly. When a host
+matches %hosts_avoid_esmtp%, Exim sends HELO rather than EHLO at the
+start of the SMTP session. This means that it cannot use any of the ESMTP
+facilities such as AUTH, PIPELINING, SIZE, and STARTTLS.
+
+
+oindex:[%hosts_avoid_tls%]
+`..'=
+%hosts_avoid_tls%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[TLS,avoiding for certain hosts]
+Exim will not try to start a TLS session when delivering to any host that
+matches this list. See chapter <<CHAPTLS>> for details of TLS.
+
+
+oindex:[%hosts_max_try%]
+`..'=
+%hosts_max_try%, Use: 'smtp', Type: 'integer', Default: '5'
+===
+
+cindex:[host,maximum number to try]
+cindex:[limit,number of hosts tried]
+cindex:[limit,number of MX tried]
+cindex:[MX record,maximum tried]
+This option limits the number of IP addresses that are tried for any one
+delivery in cases where there are temporary delivery errors. Section
+<<SECTvalhosmax>> describes in detail how the value of this option is used.
+
+
+oindex:[%hosts_max_try_hardlimit%]
+`..'=
+%hosts_max_try_hardlimit%, Use: 'smtp', Type: 'integer', Default: '50'
+===
+
+This is an additional check on the maximum number of IP addresses that Exim
+tries for any one delivery. Section <<SECTvalhosmax>> describes its use and why
+it exists.
+
+
+
+oindex:[%hosts_nopass_tls%]
+`..'=
+%hosts_nopass_tls%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[TLS,passing connection]
+cindex:[multiple SMTP deliveries]
+cindex:[TLS,multiple message deliveries]
+For any host that matches this list, a connection on which a TLS session has
+been started will not be passed to a new delivery process for sending another
+message on the same connection. See section <<SECTmulmessam>> for an explanation
+of when this might be needed.
+
+
+oindex:[%hosts_override%]
+`..'=
+%hosts_override%, Use: 'smtp', Type: 'boolean', Default: 'false'
+===
+
+If this option is set and the %hosts% option is also set, any hosts that are
+attached to the address are ignored, and instead the hosts specified by the
+%hosts% option are always used. This option does not apply to
+%fallback_hosts%.
+
+
+oindex:[%hosts_randomize%]
+`..'=
+%hosts_randomize%, Use: 'smtp', Type: 'boolean', Default: 'false'
+===
+
+cindex:[randomized host list]
+cindex:[host,list of; randomized]
+cindex:[fallback,randomized hosts]
+If this option is set, and either the list of hosts is taken from the
+%hosts% or the %fallback_hosts% option, or the hosts supplied by the router
+were not obtained from MX records (this includes fallback hosts from the
+router), and were not randomizied by the router, the order of trying the hosts
+is randomized each time the transport runs. Randomizing the order of a host
+list can be used to do crude load sharing.
+
+When %hosts_randomize% is true, a host list may be split into groups whose
+order is separately randomized. This makes it possible to set up MX-like
+behaviour. The boundaries between groups are indicated by an item that is just
+`+` in the host list. For example:
+
+ hosts = host1:host2:host3:+:host4:host5
+
+The order of the first three hosts and the order of the last two hosts is
+randomized for each use, but the first three always end up before the last two.
+If %hosts_randomize% is not set, a `+` item in the list is ignored.
+
+oindex:[%hosts_require_auth%]
+`..'=
+%hosts_require_auth%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[authentication,required by client]
+This option provides a list of servers for which authentication must succeed
+before Exim will try to transfer a message. If authentication fails for
+servers which are not in this list, Exim tries to send unauthenticated. If
+authentication fails for one of these servers, delivery is deferred. This
+temporary error is detectable in the retry rules, so it can be turned into a
+hard failure if required. See also %hosts_try_auth%, and chapter
+<<CHAPSMTPAUTH>> for details of authentication.
+
+
+oindex:[%hosts_require_tls%]
+`..'=
+%hosts_require_tls%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[TLS,requiring for certain servers]
+Exim will insist on using a TLS session when delivering to any host that
+matches this list. See chapter <<CHAPTLS>> for details of TLS.
+*Note*: This option affects outgoing mail only. To insist on TLS for
+incoming messages, use an appropriate ACL.
+
+oindex:[%hosts_try_auth%]
+`..'=
+%hosts_try_auth%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[authentication,optional in client]
+This option provides a list of servers to which, provided they announce
+authentication support, Exim will attempt to authenticate as a client when it
+connects. If authentication fails, Exim will try to transfer the message
+unauthenticated. See also %hosts_require_auth%, and chapter <<CHAPSMTPAUTH>>
+for details of authentication.
+
+oindex:[%interface%]
+`..'=
+%interface%, Use: 'smtp', Type: 'string list'!!, Default: 'unset'
+===
+
+cindex:[bind IP address]
+cindex:[IP address,binding]
+This option specifies which interface to bind to when making an outgoing SMTP
+call. The variables $host$ and $host_address$ refer to the host to which a
+connection is about to be made during the expansion of the string. Forced
+expansion failure, or an empty string result causes the option to be ignored.
+Otherwise, after expansion,
+the string must be a list of IP addresses, colon-separated by default, but the
+separator can be changed in the usual way.
+For example:
+
+ interface = <; 192.168.123.123 ; 3ffe:ffff:836f::fe86:a061
+
+The first interface of the correct type (IPv4 or IPv6) is used for the outgoing
+connection. If none of them are the correct type, the option is ignored. If
+%interface% is not set, or is ignored, the system's IP functions choose which
+interface to use if the host has more than one.
+
+
+oindex:[%keepalive%]
+`..'=
+%keepalive%, Use: 'smtp', Type: 'boolean', Default: 'true'
+===
+
+cindex:[keepalive,on outgoing connection]
+This option controls the setting of SO_KEEPALIVE on outgoing TCP/IP socket
+connections. When set, it causes the kernel to probe idle connections
+periodically, by sending packets with ``old'' sequence numbers. The other end of
+the connection should send a acknowledgement if the connection is still okay or
+a reset if the connection has been aborted. The reason for doing this is that
+it has the beneficial effect of freeing up certain types of connection that can
+get stuck when the remote host is disconnected without tidying up the TCP/IP
+call properly. The keepalive mechanism takes several hours to detect
+unreachable hosts.
+
+
+oindex:[%max_rcpt%]
+`..'=
+%max_rcpt%, Use: 'smtp', Type: 'integer', Default: '100'
+===
+
+cindex:[RCPT,maximum number of outgoing]
+This option limits the number of RCPT commands that are sent in a single
+SMTP message transaction. Each set of addresses is treated independently, and
+so can cause parallel connections to the same host if %remote_max_parallel%
+permits this.
+
+
+oindex:[%multi_domain%]
+`..'=
+%multi_domain%, Use: 'smtp', Type: 'boolean', Default: 'true'
+===
+
+When this option is set, the ^smtp^ transport can handle a number of addresses
+containing a mixture of different domains provided they all resolve to the same
+list of hosts. Turning the option off restricts the transport to handling only
+one domain at a time. This is useful if you want to use $domain$ in an
+expansion for the transport, because it is set only when there is a single
+domain involved in a remote delivery.
+
+
+oindex:[%port%]
+`..'=
+%port%, Use: 'smtp', Type: 'string'!!, Default: 'see below'
+===
+
+cindex:[port,sending TCP/IP]
+cindex:[TCP/IP,setting outgoing port]
+This option specifies the TCP/IP port on the server to which Exim connects. If
+it begins with a digit it is taken as a port number; otherwise it is looked up
+using 'getservbyname()'. The default value is normally ``smtp'', but if
+%protocol% is set to ``lmtp'', the default is ``lmtp''.
+If the expansion fails, or if a port number cannot be found, delivery is
+deferred.
+
+
+
+oindex:[%protocol%]
+`..'=
+%protocol%, Use: 'smtp', Type: 'string', Default: 'smtp'
+===
+
+cindex:[LMTP,over TCP/IP]
+If this option is set to ``lmtp'' instead of ``smtp'', the default value for the
+%port% option changes to ``lmtp'', and the transport operates the LMTP protocol
+(RFC 2033) instead of SMTP. This protocol is sometimes used for local
+deliveries into closed message stores. Exim also has support for running LMTP
+over a pipe to a local process -- see chapter <<CHAPLMTP>>.
+
+
+oindex:[%retry_include_ip_address%]
+`..'=
+%retry_include_ip_address%, Use: 'smtp', Type: 'boolean', Default: 'true'
+===
+
+Exim normally includes both the host name and the IP address in the key it
+constructs for indexing retry data after a temporary delivery failure. This
+means that when one of several IP addresses for a host is failing, it gets
+tried periodically (controlled by the retry rules), but use of the other IP
+addresses is not affected.
+
+However, in some dialup environments hosts are assigned a different IP address
+each time they connect. In this situation the use of the IP address as part of
+the retry key leads to undesirable behaviour. Setting this option false causes
+Exim to use only the host name. This should normally be done on a separate
+instance of the ^smtp^ transport, set up specially to handle the dialup hosts.
+
+
+oindex:[%serialize_hosts%]
+`..'=
+%serialize_hosts%, Use: 'smtp', Type: 'host list'!!, Default: 'unset'
+===
+
+cindex:[serializing connections]
+cindex:[host,serializing connections]
+Because Exim operates in a distributed manner, if several messages for the same
+host arrive at around the same time, more than one simultaneous connection to
+the remote host can occur. This is not usually a problem except when there is a
+slow link between the hosts. In that situation it may be helpful to restrict
+Exim to one connection at a time. This can be done by setting
+%serialize_hosts% to match the relevant hosts.
+
+cindex:[hints database,serializing deliveries to a host]
+Exim implements serialization by means of a hints database in which a record is
+written whenever a process connects to one of the restricted hosts. The record
+is deleted when the connection is completed. Obviously there is scope for
+records to get left lying around if there is a system or program crash. To
+guard against this, Exim ignores any records that are more than six hours old.
+
+If you set up this kind of serialization, you should also arrange to delete the
+relevant hints database whenever your system reboots. The names of the files
+start with _misc_ and they are kept in the _spool/db_ directory. There
+may be one or two files, depending on the type of DBM in use. The same files
+are used for ETRN serialization.
+
+
+oindex:[%size_addition%]
+`..'=
+%size_addition%, Use: 'smtp', Type: 'integer', Default: '1024'
+===
+
+cindex:[SMTP,SIZE]
+cindex:[message,size issue for transport filter]
+cindex:[size,of message]
+cindex:[transport,filter]
+cindex:[filter,transport filter]
+If a remote SMTP server indicates that it supports the SIZE option of the
+MAIL command, Exim uses this to pass over the message size at the start of
+an SMTP transaction. It adds the value of %size_addition% to the value it
+sends, to allow for headers and other text that may be added during delivery by
+configuration options or in a transport filter. It may be necessary to increase
+this if a lot of text is added to messages.
+
+Alternatively, if the value of %size_addition% is set negative, it disables
+the use of the SIZE option altogether.
+
+
+oindex:[%tls_certificate%]
+`..'=
+%tls_certificate%, Use: 'smtp', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS client certificate, location of]
+cindex:[certificate for client, location of]
+The value of this option must be the absolute path to a file which contains the
+client's certificate, for use when sending a message over an encrypted
+connection. The values of $host$ and $host_address$ are set to the name
+and address of the server during the expansion. See chapter <<CHAPTLS>> for
+details of TLS.
+
+*Note*: This option must be set if you want Exim to use TLS when sending
+messages as a client. The global option of the same name specifies the
+certificate for Exim as a server; it is not automatically assumed that the same
+certificate should be used when Exim is operating as a client.
+
+
+oindex:[%tls_crl%]
+`..'=
+%tls_crl%, Use: 'smtp', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,client certificate revocation list]
+cindex:[certificate,revocation list for client]
+This option specifies a certificate revocation list. The expanded value must
+be the name of a file that contains a CRL in PEM format.
+
+
+oindex:[%tls_privatekey%]
+`..'=
+%tls_privatekey%, Use: 'smtp', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS client private key, location of]
+The value of this option must be the absolute path to a file which contains the
+client's private key, for use when sending a message over an encrypted
+connection. The values of $host$ and $host_address$ are set to the name
+and address of the server during the expansion.
+If this option is unset, the private key is assumed to be in the same file as
+the certificate.
+See chapter <<CHAPTLS>> for details of TLS.
+
+
+oindex:[%tls_require_ciphers%]
+`..'=
+%tls_require_ciphers%, Use: 'smtp', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,requiring specific ciphers]
+cindex:[cipher,requiring specific]
+The value of this option must be a list of permitted cipher suites, for use
+when setting up an outgoing encrypted connection. (There is a global option of
+the same name for controlling incoming connections.) The values of $host$ and
+$host_address$ are set to the name and address of the server during the
+expansion. See chapter <<CHAPTLS>> for details of TLS; note that this option is
+used in different ways by OpenSSL and GnuTLS (see sections <<SECTreqciphssl>>
+and <<SECTreqciphgnu>>). For GnuTLS, the order of the ciphers is a preference
+order.
+
+
+
+oindex:[%tls_tempfail_tryclear%]
+`..'=
+%tls_tempfail_tryclear%, Use: 'smtp', Type: 'boolean', Default: 'true'
+===
+
+When the server host is not in %hosts_require_tls%, and there is a problem in
+setting up a TLS session, this option determines whether or not Exim should try
+to deliver the message unencrypted. If it is set false, delivery to the
+current host is deferred; if there are other hosts, they are tried. If this
+option is set true, Exim attempts to deliver unencrypted after a 4##'xx'
+response to STARTTLS. Also, if STARTTLS is accepted, but the subsequent
+TLS negotiation fails, Exim closes the current connection (because it is in an
+unknown state), opens a new one to the same host, and then tries the delivery
+in clear.
+
+
+oindex:[%tls_verify_certificates%]
+`..'=
+%tls_verify_certificates%, Use: 'smtp', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[TLS,server certificate verification]
+cindex:[certificate,verification of server]
+The value of this option must be the absolute path to a file containing
+permitted server certificates, for use when setting up an encrypted connection.
+Alternatively, if you are using OpenSSL, you can set
+%tls_verify_certificates% to the name of a directory containing certificate
+files. This does not work with GnuTLS; the option must be set to the name of a
+single file if you are using GnuTLS. The values of $host$ and
+$host_address$ are set to the name and address of the server during the
+expansion of this option. See chapter <<CHAPTLS>> for details of TLS.
+
+
+
+
+[[SECTvalhosmax]]
+How the limits for the number of hosts to try are used
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[host,maximum number to try]
+cindex:[limit,hosts; maximum number tried]
+There are two options that are concerned with the number of hosts that are
+tried when an SMTP delivery takes place. They are %hosts_max_try% and
+%hosts_max_try_hardlimit%.
+
+
+The %hosts_max_try% option limits the number of hosts that are tried
+for a single delivery. However, despite the term ``host'' in its name, the option
+actually applies to each IP address independently. In other words, a multihomed
+host is treated as several independent hosts, just as it is for retrying.
+
+Many of the larger ISPs have multiple MX records which often point to
+multihomed hosts. As a result, a list of a dozen or more IP addresses may be
+created as a result of routing one of these domains.
+
+Trying every single IP address on such a long list does not seem sensible; if
+several at the top of the list fail, it is reasonable to assume there is some
+problem that is likely to affect all of them. Roughly speaking, the value of
+%hosts_max_try% is the maximum number that are tried before deferring the
+delivery. However, the logic cannot be quite that simple.
+
+Firstly, IP addresses that are skipped because their retry times have not
+arrived do not count, and in addition, addresses that are past their retry
+limits are also not counted, even when they are tried. This means that when
+some IP addresses are past their retry limits, more than the value of
+%hosts_max_retry% may be tried. The reason for this behaviour is to ensure
+that all IP addresses are considered before timing out an email address (but
+see below for an exception).
+
+Secondly, when the %hosts_max_try% limit is reached, Exim looks down the host
+list to see if there is a subsequent host with a different (higher valued) MX.
+If there is, that host is considered next, and the current IP address is used
+but not counted. This behaviour helps in the case of a domain with a retry rule
+that hardly ever delays any hosts, as is now explained:
+
+Consider the case of a long list of hosts with one MX value, and a few with a
+higher MX value. If %hosts_max_try% is small (the default is 5) only a few
+hosts at the top of the list are tried at first. With the default retry rule,
+which specifies increasing retry times, the higher MX hosts are eventually
+tried when those at the top of the list are skipped because they have not
+reached their retry times.
+
+However, it is common practice to put a fixed short retry time on domains for
+large ISPs, on the grounds that their servers are rarely down for very long.
+Unfortunately, these are exactly the domains that tend to resolve to long lists
+of hosts. The short retry time means that the lowest MX hosts are tried every
+time. The attempts may be in a different order because of random sorting, but
+without the special MX check, the higher MX hosts would never be tried
+
+until all the lower MX hosts had timed out (which might be several days),
+because there are always some lower MX hosts that have reached their retry
+times. With the special check, Exim considers at least one IP address from each
+MX value at every delivery attempt, even if the %hosts_max_try% limit has
+already been reached.
+
+The above logic means that %hosts_max_try% is not a hard limit, and in
+particular, Exim normally eventually tries all the IP addresses before timing
+out an email address. When %hosts_max_try% was implemented, this seemed a
+reasonable thing to do. Recently, however, some lunatic DNS configurations have
+been set up with hundreds of IP addresses for some domains. It can
+take a very long time indeed for an address to time out in these cases.
+
+The %hosts_max_try_hardlimit% option was added to help with this problem.
+Exim never tries more than this number of IP addresses; if it hits this limit
+and they are all timed out, the email address is bounced, even though not all
+possible IP addresses have been tried.
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPrewrite]]
+Address rewriting
+-----------------
+cindex:[rewriting,addresses]
+There are some circumstances in which Exim automatically rewrites domains in
+addresses. The two most common are when an address is given without a domain
+(referred to as an ``unqualified address'') or when an address contains an
+abbreviated domain that is expanded by DNS lookup.
+
+Unqualified envelope addresses are accepted only for locally submitted
+messages, or messages from hosts that match %sender_unqualified_hosts% or
+%recipient_unqualified_hosts%, respectively. Unqualified addresses in header
+lines are qualified if they are in locally submitted messages, or messages from
+hosts that are permitted to send unqualified envelope addresses. Otherwise,
+unqualified addresses in header lines are neither qualified nor rewritten.
+
+One situation in which Exim does 'not' automatically rewrite a domain is
+when it is the name of a CNAME record in the DNS. The older RFCs suggest that
+such a domain should be rewritten using the ``canonical'' name, and some MTAs do
+this. The new RFCs do not contain this suggestion.
+
+
+Explicitly configured address rewriting
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+This chapter describes the rewriting rules that can be used in the
+main rewrite section of the configuration file, and also in the generic
+%headers_rewrite% option that can be set on any transport.
+
+Some people believe that configured address rewriting is a Mortal Sin.
+Others believe that life is not possible without it. Exim provides the
+facility; you do not have to use it.
+
+The main rewriting rules that appear in the ``rewrite'' section of the
+configuration file are applied to addresses in incoming messages, both envelope
+addresses and addresses in header lines. Each rule specifies the types of
+address to which it applies.
+
+Rewriting of addresses in header lines applies only to those headers that
+were received with the message, and, in the case of transport rewriting, those
+that were added by a system filter. That is, it applies only to those headers
+that are common to all copies of the message. Header lines that are added by
+individual routers or transports (and which are therefore specific to
+individual recipient addresses) are not rewritten.
+
+In general, rewriting addresses from your own system or domain has some
+legitimacy. Rewriting other addresses should be done only with great care and
+in special circumstances. The author of Exim believes that rewriting should be
+used sparingly, and mainly for ``regularizing'' addresses in your own domains.
+Although it can sometimes be used as a routing tool, this is very strongly
+discouraged.
+
+There are two commonly encountered circumstances where rewriting is used, as
+illustrated by these examples:
+
+- The company whose domain is 'hitch.fict.example' has a number of hosts that
+exchange mail with each other behind a firewall, but there is only a single
+gateway to the outer world. The gateway rewrites '*.hitch.fict.example' as
+'hitch.fict.example' when sending mail off-site.
+
+- A host rewrites the local parts of its own users so that, for example,
+'fp42@hitch.fict.example' becomes 'Ford.Prefect@hitch.fict.example'.
+
+
+
+When does rewriting happen?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[rewriting,timing of]
+cindex:[{ACL},rewriting addresses in]
+Configured address rewriting can take place at several different stages of a
+message's processing.
+
+At the start of an ACL for MAIL, the sender address may have been rewritten
+by a special SMTP-time rewrite rule (see section <<SECTrewriteS>>), but no
+ordinary rewrite rules have yet been applied. If, however, the sender address
+is verified in the ACL, it is rewritten before verification, and remains
+rewritten thereafter. The subsequent value of $sender_address$ is the
+rewritten address. This also applies if sender verification happens in a
+RCPT ACL. Otherwise, when the sender address is not verified, it is
+rewritten as soon as a message's header lines have been received.
+
+Similarly, at the start of an ACL for RCPT, the current recipient's address
+may have been rewritten by a special SMTP-time rewrite rule, but no ordinary
+rewrite rules have yet been applied to it. However, the behaviour is different
+from the sender address when a recipient is verified. The address is rewritten
+for the verification, but the rewriting is not remembered at this stage. The
+value of $local_part$ and $domain$ after verification are always the same
+as they were before (that is, they contain the unrewritten -- except for
+SMTP-time rewriting -- address).
+
+Once a message's header lines have been received, all the envelope recipient
+addresses are permanently rewritten, and rewriting is also applied to the
+addresses in the header lines (if configured).
+cindex:['local_scan()' function,address rewriting; timing of]
+Thus, all the rewriting is completed before the DATA ACL and
+'local_scan()' functions are run.
+
+When an address is being routed, either for delivery or for verification,
+rewriting is applied immediately to child addresses that are generated by
+redirection, unless %no_rewrite% is set on the router.
+
+cindex:[envelope sender, rewriting]
+cindex:[rewriting,at transport time]
+At transport time, additional rewriting of addresses in header lines can be
+specified by setting the generic %headers_rewrite% option on a transport. This
+option contains rules that are identical in form to those in the rewrite
+section of the configuration file. In addition, the outgoing envelope sender
+can be rewritten by means of the %return_path% transport option. However, it
+is not possible to rewrite envelope recipients at transport time.
+
+
+
+
+Testing the rewriting rules that apply on input
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[rewriting,testing]
+cindex:[testing,rewriting]
+Exim's input rewriting configuration appears in a part of the run time
+configuration file headed by ``begin rewrite''. It can be tested by the %-brw%
+command line option. This takes an address (which can be a full RFC 2822
+address) as its argument. The output is a list of how the address would be
+transformed by the rewriting rules for each of the different places it might
+appear in an incoming message, that is, for each different header and for the
+envelope sender and recipient fields. For example,
+
+ exim -brw ph10@exim.workshop.example
+
+might produce the output
+
+ sender: Philip.Hazel@exim.workshop.example
+ from: Philip.Hazel@exim.workshop.example
+ to: ph10@exim.workshop.example
+ cc: ph10@exim.workshop.example
+ bcc: ph10@exim.workshop.example
+ reply-to: Philip.Hazel@exim.workshop.example
+ env-from: Philip.Hazel@exim.workshop.example
+ env-to: ph10@exim.workshop.example
+
+which shows that rewriting has been set up for that address when used in any of
+the source fields, but not when it appears as a recipient address. At the
+present time, there is no equivalent way of testing rewriting rules that are
+set for a particular transport.
+
+
+Rewriting rules
+~~~~~~~~~~~~~~~
+cindex:[rewriting,rules]
+The rewrite section of the configuration file consists of lines of rewriting
+rules in the form
+
+ <source pattern> <replacement> <flags>
+
+Rewriting rules that are specified for the %headers_rewrite% generic transport
+option are given as a colon-separated list. Each item in the list takes the
+same form as a line in the main rewriting configuration
+(except that any colons must be doubled, of course).
+
+The formats of source patterns and replacement strings are described below.
+Each is terminated by white space, unless enclosed in double quotes, in which
+case normal quoting conventions apply inside the quotes. The flags are single
+characters which may appear in any order. Spaces and tabs between them are
+ignored.
+
+For each address that could potentially be rewritten, the rules are scanned in
+order, and replacements for the address from earlier rules can themselves be
+replaced by later rules (but see the ``q'' and ``R'' flags).
+
+The order in which addresses are rewritten is undefined, may change between
+releases, and must not be relied on, with one exception: when a message is
+received, the envelope sender is always rewritten first, before any header
+lines are rewritten. For example, the replacement string for a rewrite of an
+address in 'To:' must not assume that the message's address in 'From:' has (or
+has not) already been rewritten. However, a rewrite of 'From:' may assume that
+the envelope sender has already been rewritten.
+
+The variables $local_part$ and $domain$ can be used in the replacement
+string to refer to the address that is being rewritten. Note that lookup-driven
+rewriting can be done by a rule of the form
+
+ *@* ${lookup ...
+
+where the lookup key uses $1$ and $2$ or $local_part$ and $domain$ to
+refer to the address that is being rewritten.
+
+
+Rewriting patterns
+~~~~~~~~~~~~~~~~~~
+cindex:[rewriting,patterns]
+cindex:[address list,in a rewriting pattern]
+The source pattern in a rewriting rule is any item which may appear in an
+address list (see section <<SECTaddresslist>>). It is in fact processed as a
+single-item address list, which means that it is expanded before being tested
+against the address.
+
+Domains in patterns should be given in lower case. Local parts in patterns are
+case-sensitive. If you want to do case-insensitive matching of local parts, you
+can use a regular expression that starts with `^(?i)`.
+
+cindex:[numerical variables ($1$ $2$ etc),in rewriting rules]
+After matching, the numerical variables $1$, $2$, etc. may be set,
+depending on the type of match which occurred. These can be used in the
+replacement string to insert portions of the incoming address. $0$ always
+refers to the complete incoming address. When a regular expression is used, the
+numerical variables are set from its capturing subexpressions. For other types
+of pattern they are set as follows:
+
+- If a local part or domain starts with an asterisk, the numerical variables
+refer to the character strings matched by asterisks, with $1$ associated with
+the first asterisk, and $2$ with the second, if present. For example, if the
+pattern
+
+ *queen@*.fict.example
++
+is matched against the address 'hearts-queen@wonderland.fict.example' then
+
+ $0 = hearts-queen@wonderland.fict.example
+ $1 = hearts-
+ $2 = wonderland
++
+Note that if the local part does not start with an asterisk, but the domain
+does, it is $1$ that contains the wild part of the domain.
+
+- If the domain part of the pattern is a partial lookup, the wild and fixed parts
+of the domain are placed in the next available numerical variables. Suppose,
+for example, that the address 'foo@bar.baz.example' is processed by a
+rewriting rule of the form
+
+ *@partial-dbm;/some/dbm/file <replacement string>
++
+and the key in the file that matches the domain is `*.baz.example`. Then
+
+ $1 = foo
+ $2 = bar
+ $3 = baz.example
++
+If the address 'foo@baz.example' is looked up, this matches the same
+wildcard file entry, and in this case $2$ is set to the empty string, but
+$3$ is still set to 'baz.example'. If a non-wild key is matched in a
+partial lookup, $2$ is again set to the empty string and $3$ is set to the
+whole domain. For non-partial domain lookups, no numerical variables are set.
+
+
+
+Rewriting replacements
+~~~~~~~~~~~~~~~~~~~~~~
+cindex:[rewriting,replacements]
+If the replacement string for a rule is a single asterisk, addresses that
+match the pattern and the flags are 'not' rewritten, and no subsequent
+rewriting rules are scanned. For example,
+
+ hatta@lookingglass.fict.example * f
+
+specifies that 'hatta@lookingglass.fict.example' is never to be rewritten in
+'From:' headers.
+
+If the replacement string is not a single asterisk, it is expanded, and must
+yield a fully qualified address. Within the expansion, the variables
+$local_part$ and $domain$ refer to the address that is being rewritten.
+Any letters they contain retain their original case -- they are not lower
+cased. The numerical variables are set up according to the type of pattern that
+matched the address, as described above. If the expansion is forced to fail by
+the presence of ``fail'' in a conditional or lookup item, rewriting by the
+current rule is abandoned, but subsequent rules may take effect. Any other
+expansion failure causes the entire rewriting operation to be abandoned, and an
+entry written to the panic log.
+
+
+
+Rewriting flags
+~~~~~~~~~~~~~~~
+There are three different kinds of flag that may appear on rewriting rules:
+
+- Flags that specify which headers and envelope addresses to rewrite: E, F, T, b,
+c, f, h, r, s, t.
+
+- A flag that specifies rewriting at SMTP time: S.
+
+- Flags that control the rewriting process: Q, q, R, w.
+
+For rules that are part of the %headers_rewrite% generic transport option,
+E, F, T, and S are not permitted.
+
+
+
+Flags specifying which headers and envelope addresses to rewrite
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[rewriting,flags]
+If none of the following flag letters, nor the ``S'' flag (see section
+<<SECTrewriteS>>) are present, a main rewriting rule applies to all headers and
+to both the sender and recipient fields of the envelope, whereas a
+transport-time rewriting rule just applies to all headers. Otherwise, the
+rewriting rule is skipped unless the relevant addresses are being processed.
+
+&&&
+`E` rewrite all envelope fields
+`F` rewrite the envelope From field
+`T` rewrite the envelope To field
+`b` rewrite the 'Bcc:' header
+`c` rewrite the 'Cc:' header
+`f` rewrite the 'From:' header
+`h` rewrite all headers
+`r` rewrite the 'Reply-To:' header
+`s` rewrite the 'Sender:' header
+`t` rewrite the 'To:' header
+&&&
+
+You should be particularly careful about rewriting 'Sender:' headers, and
+restrict this to special known cases in your own domains.
+
+
+[[SECTrewriteS]]
+The SMTP-time rewriting flag
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,rewriting malformed addresses]
+cindex:[RCPT,rewriting argument of]
+cindex:[MAIL,rewriting argument of]
+The rewrite flag ``S'' specifies a rewrite of incoming envelope addresses at SMTP
+time, as soon as an address is received in a MAIL or RCPT command, and
+before any other processing; even before syntax checking. The pattern is
+required to be a regular expression, and it is matched against the whole of the
+data for the command, including any surrounding angle brackets.
+
+This form of rewrite rule allows for the handling of addresses that are not
+compliant with RFCs 2821 and 2822 (for example, ``bang paths'' in batched SMTP
+input). Because the input is not required to be a syntactically valid address,
+the variables $local_part$ and $domain$ are not available during the
+expansion of the replacement string. The result of rewriting replaces the
+original address in the MAIL or RCPT command.
+
+
+Flags controlling the rewriting process
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+There are four flags which control the way the rewriting process works. These
+take effect only when a rule is invoked, that is, when the address is of the
+correct type (matches the flags) and matches the pattern:
+
+- If the ``Q'' flag is set on a rule, the rewritten address is permitted to be an
+unqualified local part. It is qualified with %qualify_recipient%. In the
+absence of ``Q'' the rewritten address must always include a domain.
+
+- If the ``q'' flag is set on a rule, no further rewriting rules are considered,
+even if no rewriting actually takes place because of a ``fail'' in the expansion.
+The ``q'' flag is not effective if the address is of the wrong type (does not
+match the flags) or does not match the pattern.
+
+- The ``R'' flag causes a successful rewriting rule to be re-applied to the new
+address, up to ten times. It can be combined with the ``q'' flag, to stop
+rewriting once it fails to match (after at least one successful rewrite).
+
+- cindex:[rewriting,whole addresses]
+When an address in a header is rewritten, the rewriting normally applies only
+to the working part of the address, with any comments and RFC 2822 ``phrase''
+left unchanged. For example, rewriting might change
+
+ From: Ford Prefect <fp42@restaurant.hitch.fict.example>
++
+into
+
+ From: Ford Prefect <prefectf@hitch.fict.example>
++
+Sometimes there is a need to replace the whole address item, and this can be
+done by adding the flag letter ``w'' to a rule. If this is set on a rule that
+causes an address in a header line to be rewritten, the entire address is
+replaced, not just the working part. The replacement must be a complete RFC
+2822 address, including the angle brackets if necessary. If text outside angle
+brackets contains a character whose value is greater than 126 or less than 32
+(except for tab), the text is encoded according to RFC 2047.
+The character set is taken from %headers_charset%, which defaults to
+ISO-8859-1.
++
+When the ``w'' flag is set on a rule that causes an envelope address to be
+rewritten, all but the working part of the replacement address is discarded.
+
+
+
+Rewriting examples
+~~~~~~~~~~~~~~~~~~
+Here is an example of the two common rewriting paradigms:
+
+....
+*@*.hitch.fict.example $1@hitch.fict.example
+*@hitch.fict.example ${lookup{$1}dbm{/etc/realnames}\
+ {$value}fail}@hitch.fict.example bctfrF
+....
+
+Note the use of ``fail'' in the lookup expansion in the second rule, forcing
+the string expansion to fail if the lookup does not succeed. In this context it
+has the effect of leaving the original address unchanged, but Exim goes on to
+consider subsequent rewriting rules, if any, because the ``q'' flag is not
+present in that rule. An alternative to ``fail'' would be to supply $1$
+explicitly, which would cause the rewritten address to be the same as before,
+at the cost of a small bit of processing. Not supplying either of these is an
+error, since the rewritten address would then contain no local part.
+
+The first example above replaces the domain with a superior, more general
+domain. This may not be desirable for certain local parts. If the rule
+
+ root@*.hitch.fict.example *
+
+were inserted before the first rule, rewriting would be suppressed for the
+local part 'root' at any domain ending in 'hitch.fict.example'.
+
+Rewriting can be made conditional on a number of tests, by making use of
+$\{if$ in the expansion item. For example, to apply a rewriting rule only to
+messages that originate outside the local host:
+
+....
+*@*.hitch.fict.example "${if !eq {$sender_host_address}{}\
+ {$1@hitch.fict.example}fail}"
+....
+
+The replacement string is quoted in this example because it contains white
+space.
+
+cindex:[rewriting,bang paths]
+cindex:[bang paths,rewriting]
+Exim does not handle addresses in the form of ``bang paths''. If it sees such an
+address it treats it as an unqualified local part which it qualifies with the
+local qualification domain (if the source of the message is local or if the
+remote host is permitted to send unqualified addresses). Rewriting can
+sometimes be used to handle simple bang paths with a fixed number of
+components. For example, the rule
+
+ \N^([^!]+)!(.*)@your.domain.example$\N $2@$1
+
+rewrites a two-component bang path 'host.name!user' as the domain address
+'user@host.name'. However, there is a security implication in using this as
+a global rewriting rule for envelope addresses. It can provide a backdoor
+method for using your system as a relay, because the incoming addresses appear
+to be local. If the bang path addresses are received via SMTP, it is safer to
+use the ``S'' flag to rewrite them as they are received, so that relay checking
+can be done on the rewritten addresses.
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPretry]]
+Retry configuration
+-------------------
+cindex:[retry configuration, description of]
+cindex:[configuration file,retry section]
+The ``retry'' section of the run time configuration file contains a list of retry
+rules which control how often Exim tries to deliver messages that cannot be
+delivered at the first attempt. If there are no retry rules, temporary errors
+are treated as permanent. The %-brt% command line option can be used to test
+which retry rule will be used for a given address or domain.
+
+The most common cause of retries is temporary failure to deliver to a remote
+host because the host is down, or inaccessible because of a network problem.
+Exim's retry processing in this case is applied on a per-host (strictly, per IP
+address) basis, not on a per-message basis. Thus, if one message has recently
+been delayed, delivery of a new message to the same host is not immediately
+tried, but waits for the host's retry time to arrive. If the %retry_defer% log
+selector is set, the message
+cindex:[retry,time not reached]
+``retry time not reached'' is written to the main log whenever a delivery is
+skipped for this reason. Section <<SECToutSMTPerr>> contains more details of the
+handling of errors during remote deliveries.
+
+Retry processing applies to routing as well as to delivering, except as covered
+in the next paragraph. The retry rules do not distinguish between these
+actions. It is not possible, for example, to specify different behaviour for
+failures to route the domain 'snark.fict.example' and failures to deliver to
+the host 'snark.fict.example'. I didn't think anyone would ever need this
+added complication, so did not implement it. However, although they share the
+same retry rule, the actual retry times for routing and transporting a given
+domain are maintained independently.
+
+When a delivery is not part of a queue run (typically an immediate delivery on
+receipt of a message), the routers are always run, and local deliveries are
+always attempted, even if retry times are set for them. This makes for better
+behaviour if one particular message is causing problems (for example, causing
+quota overflow, or provoking an error in a filter file). If such a delivery
+suffers a temporary failure, the retry data is updated as normal, and
+subsequent delivery attempts from queue runs occur only when the retry time for
+the local address is reached.
+
+
+
+Retry rules
+~~~~~~~~~~~
+cindex:[retry,rules]
+Each retry rule occupies one line and consists of three or four parts,
+separated by white space: a pattern, an error name, an optional list of sender
+addresses, and a list of retry parameters. The pattern and sender lists must be
+enclosed in double quotes if they contain white space. The rules are searched in
+order until one is found where the pattern, error name, and sender list (if
+present) match the failing host or address, the error that occurred, and the
+message's sender, respectively.
+
+
+The pattern is any single item that may appear in an address list (see section
+<<SECTaddresslist>>). It is in fact processed as a one-item address list, which
+means that it is expanded before being tested against the address that has
+been delayed. Address list processing treats a plain domain name as if it were
+preceded by ``\*@'', which makes it possible for many retry rules to start with
+just a domain. For example,
+
+ lookingglass.fict.example * F,24h,30m;
+
+provides a rule for any address in the 'lookingglass.fict.example' domain,
+whereas
+
+ alice@lookingglass.fict.example * F,24h,30m;
+
+applies only to temporary failures involving the local part %alice%.
+In practice, almost all rules start with a domain name pattern without a local
+part.
+
+cindex:[regular expressions,in retry rules]
+*Warning*: If you use a regular expression in a routing rule pattern, it
+must match a complete address, not just a domain, because that is how regular
+expressions work in address lists.
+
+&&&
+`\^\Nxyz\d+\.abc\.example\\$\N \* G,1h,10m,2` %Wrong%
+`\^\N[^@]+@xyz\d+\.abc\.example\\$\N \* G,1h,10m,2` %Right%
+&&&
+
+
+
+Choosing which retry rule to use
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+When Exim is looking for a retry rule after a routing attempt has failed (for
+example, after a DNS timeout), each line in the retry configuration is tested
+against the complete address only if %retry_use_local_part% is set for the
+router. Otherwise, only the domain is used, except when matching against a
+regular expression, when the local part of the address is replaced with ``\*''.
+A domain on its own can match a domain pattern, or a pattern that starts with
+``\*@''. By default, %retry_use_local_part% is true for routers where
+%check_local_user% is true, and false for other routers.
+
+Similarly, when Exim is looking for a retry rule after a local delivery has
+failed (for example, after a mailbox full error), each line in the retry
+configuration is tested against the complete address only if
+%retry_use_local_part% is set for the transport (it defaults true for all
+local transports).
+
+When Exim is looking for a retry rule after a remote delivery attempt has
+failed, what happens depends on the type of failure. After a 4##'xx' SMTP
+response for a recipient address, the whole address is used when searching the
+retry rules. The rule that is found is used to create a retry time for the
+failing address.
+
+For a temporary error that is not related to an individual address,
+(for example, a connection timeout), each line in the retry configuration is
+checked twice. First, the name of the remote host is used as a domain name
+(preceded by ``\*@'' when matching a regular expression). If this does not match
+the line, the domain from the email address is tried in a similar fashion. For
+example, suppose the MX records for 'a.b.c.example' are
+
+ a.b.c.example MX 5 x.y.z.example
+ MX 6 p.q.r.example
+ MX 7 m.n.o.example
+
+and the retry rules are
+
+ p.q.r.example * F,24h,30m;
+ a.b.c.example * F,4d,45m;
+
+and a delivery to the host 'x.y.z.example' fails. The first rule matches
+neither the host nor the domain, so Exim looks at the second rule. This does
+not match the host, but it does match the domain, so it is used to calculate
+the retry time for the host 'x.y.z.example'. Meanwhile, Exim tries to deliver
+to 'p.q.r.example'. If this fails, the first retry rule is used, because it
+matches the host.
+
+In other words, failures to deliver to host 'p.q.r.example' use the first
+rule to determine retry times, but for all the other hosts for the domain
+'a.b.c.example', the second rule is used. The second rule is also used if
+routing to 'a.b.c.example' suffers a temporary failure.
+
+
+Retry rules for specific errors
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[retry,specific errors; specifying]
+The second field in a retry rule is the name of a particular error, or an
+asterisk, which matches any error. The errors that can be tested for are:
+
+%auth_failed%::
+Authentication failed when trying to send to a host in the %hosts_require_auth%
+list in an ^smtp^ transport.
+
+%rcpt_4xx%::
+A 4##'xx' error was received for an outgoing RCPT command. Either the first or
+both of the x's can be given as specific digits, for example: `rcpt_45x` or
+`rcpt_436`. For example, to recognize 452 errors given to RCPT commands by a
+particular host, and have retries every ten minutes and a one-hour timeout, you
+could set up a retry rule of this form:
+
+ the.host.name rcpt_452 F,1h,10m
++
+These errors apply to both outgoing SMTP (the ^smtp^ transport) and outgoing
+LMTP (either the ^lmtp^ transport, or the ^smtp^ transport in LMTP mode).
+Note, however, that they apply only to responses to RCPT commands.
+
+%refused_MX%::
+A connection to a host obtained from an MX record was refused.
+
+%refused_A%::
+A connection to a host not obtained from an MX record was refused.
+
+%refused%::
+A connection was refused.
+
+%timeout_connect_MX%::
+A connection attempt to a host obtained from an MX record timed out.
+
+%timeout_connect_A%::
+A connection attempt to a host not obtained from an MX record timed out.
+
+%timeout_connect%::
+A connection attempt timed out.
+
+%timeout_MX%::
+There was a timeout while connecting or during an SMTP session with a host
+obtained from an MX record.
+
+%timeout_A%::
+There was a timeout while connecting or during an SMTP session with a host not
+obtained from an MX record.
+
+%timeout%::
+There was a timeout while connecting or during an SMTP session.
+
+%quota%::
+A mailbox quota was exceeded in a local delivery by the ^appendfile^ transport.
+
+%quota_%<'time'>::
+cindex:[quota,error testing in retry rule]
+cindex:[retry,quota error testing]
+A mailbox quota was exceeded in a local delivery by the ^appendfile^ transport,
+and the mailbox has not been accessed for <'time'>. For example, 'quota_4d'
+applies to a quota error when the mailbox has not been accessed for four days.
+
+///
+End of list
+///
+
+cindex:[mailbox,time of last read]
+The idea of %quota_%<'time'> is to make it possible to have shorter timeouts
+when the mailbox is full and is not being read by its owner. Ideally, it should
+be based on the last time that the user accessed the mailbox. However, it is
+not always possible to determine this. Exim uses the following heuristic rules:
+
+- If the mailbox is a single file, the time of last access (the ``atime'') is used.
+As no new messages are being delivered (because the mailbox is over quota),
+Exim does not access the file, so this is the time of last user access.
+
+- cindex:[maildir format,time of last read]
+For a maildir delivery, the time of last modification of the _new_
+subdirectory is used. As the mailbox is over quota, no new files are created in
+the _new_ subdirectory, because no new messages are being delivered. Any
+change to the _new_ subdirectory is therefore assumed to be the result of an
+MUA moving a new message to the _cur_ directory when it is first read. The
+time that is used is therefore the last time that the user read a new message.
+
+- For other kinds of multi-file mailbox, the time of last access cannot be
+obtained, so a retry rule that uses this type of error field is never matched.
+
+The quota errors apply both to system-enforced quotas and to Exim's own quota
+mechanism in the ^appendfile^ transport. The 'quota' error also applies
+when a local delivery is deferred because a partition is full (the ENOSPC
+error).
+
+
+
+Retry rules for specified senders
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[retry,rules; sender-specific]
+You can specify retry rules that apply only when the failing message has a
+specific sender. In particular, this can be used to define retry rules that
+apply only to bounce messages. The third item in a retry rule can be of this
+form:
+
+ senders=<address list>
+
+The retry timings themselves are then the fourth item. For example:
+
+....
+* * senders=: F,1h,30m
+....
+
+matches all temporary errors for bounce messages sent to any host. If the
+address list contains white space, it must be enclosed in quotes. For example:
+
+ a.domain timeout senders="xb.dom : yc.dom" G,8h,10m,1.5
+
+When testing retry rules using %-brt%, you can supply a sender using the %-f%
+command line option, like this:
+
+ exim -f "" -brt user@dom.ain
+
+If you do not set %-f% with %-brt%, a retry rule that contains a senders list
+is never matched.
+
+
+
+
+
+Retry parameters
+~~~~~~~~~~~~~~~~
+cindex:[retry,parameters in rules]
+The third (or fourth, if a senders list is present) field in a retry rule is a
+sequence of retry parameter sets, separated by semicolons. Each set consists of
+
+ <letter>,<cutoff time>,<arguments>
+
+The letter identifies the algorithm for computing a new retry time; the cutoff
+time is the time beyond which this algorithm no longer applies, and the
+arguments vary the algorithm's action. The cutoff time is measured from the
+time that the first failure for the domain (combined with the local part if
+relevant) was detected, not from the time the message was received.
+
+cindex:[retry,algorithms]
+The available algorithms are:
+
+- 'F': retry at fixed intervals. There is a single time parameter specifying
+the interval.
+
+- 'G': retry at geometrically increasing intervals. The first argument
+specifies a starting value for the interval, and the second a multiplier, which
+is used to increase the size of the interval at each retry.
+
+When computing the next retry time, the algorithm definitions are scanned in
+order until one whose cutoff time has not yet passed is reached. This is then
+used to compute a new retry time that is later than the current time. In the
+case of fixed interval retries, this simply means adding the interval to the
+current time. For geometrically increasing intervals, retry intervals are
+computed from the rule's parameters until one that is greater than the previous
+interval is found. The main configuration variable
+cindex:[limit,retry interval]
+cindex:[retry interval, maximum]
+cindex:[%retry_interval_max%]
+%retry_interval_max% limits the maximum interval between retries.
+
+A single remote domain may have a number of hosts associated with it, and each
+host may have more than one IP address. Retry algorithms are selected on the
+basis of the domain name, but are applied to each IP address independently. If,
+for example, a host has two IP addresses and one is unusable, Exim will
+generate retry times for it and will not try to use it until its next retry
+time comes. Thus the good IP address is likely to be tried first most of the
+time.
+
+cindex:[hints database,use for retrying]
+Retry times are hints rather than promises. Exim does not make any attempt to
+run deliveries exactly at the computed times. Instead, a queue runner process
+starts delivery processes for delayed messages periodically, and these attempt
+new deliveries only for those addresses that have passed their next retry time.
+If a new message arrives for a deferred address, an immediate delivery attempt
+occurs only if the address has passed its retry time. In the absence of new
+messages, the minimum time between retries is the interval between queue runner
+processes. There is not much point in setting retry times of five minutes if
+your queue runners happen only once an hour, unless there are a significant
+number of incoming messages (which might be the case on a system that is
+sending everything to a smart host, for example).
+
+The data in the retry hints database can be inspected by using the
+'exim_dumpdb' or 'exim_fixdb' utility programs (see chapter <<CHAPutils>>). The
+latter utility can also be used to change the data. The 'exinext' utility
+script can be used to find out what the next retry times are for the hosts
+associated with a particular mail domain, and also for local deliveries that
+have been deferred.
+
+
+Retry rule examples
+~~~~~~~~~~~~~~~~~~~
+Here are some example retry rules:
+
+ alice@wonderland.fict.example quota_5d F,7d,3h
+ wonderland.fict.example quota_5d
+ wonderland.fict.example * F,1h,15m; G,2d,1h,2;
+ lookingglass.fict.example * F,24h,30m;
+ * refused_A F,2h,20m;
+ * * F,2h,15m; G,16h,1h,1.5; F,5d,8h
+
+The first rule sets up special handling for mail to
+'alice@wonderland.fict.example' when there is an over-quota error and the
+mailbox has not been read for at least 5 days. Retries continue every three
+hours for 7 days. The second rule handles over-quota errors for all other local
+parts at 'wonderland.fict.example'; the absence of a local part has the same
+effect as supplying ``\*@''. As no retry algorithms are supplied, messages that
+fail are bounced immediately if the mailbox has not been read for at least 5
+days.
+
+The third rule handles all other errors at 'wonderland.fict.example'; retries
+happen every 15 minutes for an hour, then with geometrically increasing
+intervals until two days have passed since a delivery first failed. After the
+first hour there is a delay of one hour, then two hours, then four hours, and
+so on (this is a rather extreme example).
+
+The fourth rule controls retries for the domain 'lookingglass.fict.example'.
+They happen every 30 minutes for 24 hours only. The remaining two rules handle
+all other domains, with special action for connection refusal from hosts that
+were not obtained from an MX record.
+
+The final rule in a retry configuration should always have asterisks in the
+first two fields so as to provide a general catch-all for any addresses that do
+not have their own special handling. This example tries every 15 minutes for 2
+hours, then with intervals starting at one hour and increasing by a factor of
+1.5 up to 16 hours, then every 8 hours up to 5 days.
+
+
+
+Timeout of retry data
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[timeout,of retry data]
+cindex:[%retry_data_expire%]
+cindex:[hints database,data expiry]
+cindex:[retry,timeout of data]
+Exim timestamps the data that it writes to its retry hints database. When it
+consults the data during a delivery it ignores any that is older than the value
+set in %retry_data_expire% (default 7 days). If, for example, a host hasn't
+been tried for 7 days, Exim will try to deliver to it immediately a message
+arrives, and if that fails, it will calculate a retry time as if it were
+failing for the first time.
+
+This improves the behaviour for messages routed to rarely-used hosts such as MX
+backups. If such a host was down at one time, and happens to be down again when
+Exim tries a month later, using the old retry data would imply that it had been
+down all the time, which is not a justified assumption.
+
+If a host really is permanently dead, this behaviour causes a burst of retries
+every now and again, but only if messages routed to it are rare. It there is a
+message at least once every 7 days the retry data never expires.
+
+
+
+
+Long-term failures
+~~~~~~~~~~~~~~~~~~
+cindex:[delivery failure, long-term]
+cindex:[retry,after long-term failure]
+Special processing happens when an email address has been failing for so long
+that the cutoff time for the last algorithm is reached. For example, using the
+default retry rule:
+
+....
+* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
+....
+
+the cutoff time is four days. Reaching the retry cutoff is independent of how
+long any specific message has been failing; it is the length of continuous
+failure for the recipient address that counts.
+
+When the cutoff time is reached for a local delivery, or for all the IP
+addresses associated with a remote delivery, a subsequent delivery failure
+causes Exim to give up on the address, and a bounce message is generated.
+In order to cater for new messages that use the failing address, a next retry
+time is still computed from the final algorithm, and is used as follows:
+
+For local deliveries, one delivery attempt is always made for any subsequent
+messages. If this delivery fails, the address fails immediately. The
+post-cutoff retry time is not used.
+
+If the delivery is remote, there are two possibilities, controlled by the
+cindex:[%delay_after_cutoff%]
+%delay_after_cutoff% option of the ^smtp^ transport. The option is true by
+default. Until the post-cutoff retry time for one of the IP addresses is
+reached, the failing email address is bounced immediately, without a delivery
+attempt taking place. After that time, one new delivery attempt is made to
+those IP addresses that are past their retry times, and if that still fails,
+the address is bounced and new retry times are computed.
+
+In other words, when all the hosts for a given email address have been failing
+for a long time, Exim bounces rather then defers until one of the hosts' retry
+times is reached. Then it tries once, and bounces if that attempt fails. This
+behaviour ensures that few resources are wasted in repeatedly trying to deliver
+to a broken destination, but if the host does recover, Exim will eventually
+notice.
+
+If %delay_after_cutoff% is set false, Exim behaves differently. If all IP
+addresses are past their final cutoff time, Exim tries to deliver to those IP
+addresses that have not been tried since the message arrived. If there are
+no suitable IP addresses, or if they all fail, the address is bounced. In other
+words, it does not delay when a new message arrives, but tries the expired
+addresses immediately, unless they have been tried since the message arrived.
+If there is a continuous stream of messages for the failing domains, setting
+%delay_after_cutoff% false means that there will be many more attempts to
+deliver to permanently failing IP addresses than when %delay_after_cutoff% is
+true.
+
+
+Ultimate address timeout
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[retry,ultimate address timeout]
+An additional rule is needed to cope with cases where a host is intermittently
+available, or when a message has some attribute that prevents its delivery when
+others to the same address get through. In this situation, because some
+messages are successfully delivered, the ``retry clock'' for the address keeps
+getting restarted, and so a message could remain on the queue for ever. To
+prevent this, if a message has been on the queue for longer than the cutoff
+time of any applicable retry rule for a given address, a delivery is attempted
+for that address, even if it is not yet time, and if this delivery fails, the
+address is timed out. A new retry time is not computed in this case, so that
+other messages for the same address are considered immediately.
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPSMTPAUTH]]
+SMTP authentication
+-------------------
+cindex:[SMTP,authentication configuration]
+cindex:[authentication]
+The ``authenticators'' section of Exim's run time configuration is concerned with
+SMTP authentication. This facility is an extension to the SMTP protocol,
+described in RFC 2554, which allows a client SMTP host to authenticate itself
+to a server. This is a common way for a server to recognize clients that
+are permitted to use it as a relay. SMTP authentication is not of relevance to
+the transfer of mail between servers that have no managerial connection with
+each other.
+
+cindex:[AUTH,description of]
+Very briefly, the way SMTP authentication works is as follows:
+
+- The server advertises a number of authentication 'mechanisms' in response to
+the client's EHLO command.
+
+- The client issues an AUTH command, naming a specific mechanism. The command
+may, optionally, contain some authentication data.
+
+- The server may issue one or more 'challenges', to which the client must send
+appropriate responses. In simple authentication mechanisms, the challenges are
+just prompts for user names and passwords. The server does not have to issue
+any challenges -- in some mechanisms the relevant data may all be transmitted
+with the AUTH command.
+
+- The server either accepts or denies authentication.
+
+- If authentication succeeds, the client may optionally make use of the AUTH
+option on the MAIL command to pass an authenticated sender in subsequent
+mail transactions. Authentication lasts for the remainder of the SMTP
+connection.
+
+- If authentication fails, the client may give up, or it may try a different
+authentication mechanism, or it may try transferring mail over the
+unauthenticated connection.
+
+If you are setting up a client, and want to know which authentication
+mechanisms the server supports, you can use Telnet to connect to port 25 (the
+SMTP port) on the server, and issue an EHLO command. The response to this
+includes the list of supported mechanisms. For example:
+
+&&&
+`\$ `##*`telnet server.example 25`*
+`Trying 192.168.34.25...`
+`Connected to server.example.`
+`Escape character is \'^]\'.`
+`220 server.example ESMTP Exim 4.20 ...`
+*`ehlo client.example`*
+`250-server.example Hello client.example [10.8.4.5]`
+`250-SIZE 52428800`
+`250-PIPELINING`
+`250-AUTH PLAIN`
+`250 HELP`
+&&&
+
+The second-last line of this example output shows that the server supports
+authentication using the PLAIN mechanism. In Exim, the different authentication
+mechanisms are configured by specifying 'authenticator' drivers. Like the
+routers and transports, which authenticators are included in the binary is
+controlled by build-time definitions. The following are currently available,
+included by setting
+
+ AUTH_CRAM_MD5=yes
+ AUTH_PLAINTEXT=yes
+ AUTH_SPA=yes
+
+in _Local/Makefile_, respectively. The first of these supports the CRAM-MD5
+authentication mechanism (RFC 2195), and the second can be configured to
+support the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism,
+which is not formally documented, but used by several MUAs. The third
+authenticator supports Microsoft's 'Secure Password Authentication'
+mechanism.
+
+The authenticators are configured using the same syntax as other drivers (see
+section <<SECTfordricon>>). If no authenticators are required, no authentication
+section need be present in the configuration file. Each authenticator can in
+principle have both server and client functions. When Exim is receiving SMTP
+mail, it is acting as a server; when it is sending out messages over SMTP, it
+is acting as a client. Authenticator configuration options are provided for use
+in both these circumstances.
+
+To make it clear which options apply to which situation, the prefixes
+%server_% and %client_% are used on option names that are specific to either
+the server or the client function, respectively. Server and client functions
+are disabled if none of their options are set. If an authenticator is to be
+used for both server and client functions, a single definition, using both sets
+of options, is required. For example:
+
+ cram:
+ driver = cram_md5
+ public_name = CRAM-MD5
+ server_secret = ${if eq{$1}{ph10}{secret1}fail}
+ client_name = ph10
+ client_secret = secret2
+
+The %server_% option is used when Exim is acting as a server, and the
+%client_% options when it is acting as a client.
+
+Descriptions of the individual authenticators are given in subsequent chapters.
+The remainder of this chapter covers the generic options for the
+authenticators, followed by general discussion of the way authentication works
+in Exim.
+
+
+
+Generic options for authenticators
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[authentication,generic options]
+cindex:[options,generic; for authenticators]
+
+
+oindex:[%driver%]
+`..'=
+%driver%, Use: 'authenticators', Type: 'string', Default: 'unset'
+===
+
+This option must always be set. It specifies which of the available
+authenticators is to be used.
+
+
+oindex:[%public_name%]
+`..'=
+%public_name%, Use: 'authenticators', Type: 'string', Default: 'unset'
+===
+
+This option specifies the name of the authentication mechanism that the driver
+implements, and by which it is known to the outside world. These names should
+contain only upper case letters, digits, underscores, and hyphens (RFC 2222),
+but Exim in fact matches them caselessly. If %public_name% is not set, it
+defaults to the driver's instance name.
+
+
+oindex:[%server_advertise_condition%]
+`..'=
+%server_advertise_condition%, Use: 'authenticators', Type: 'string'!!, Default: 'unset'
+===
+
+When a server is about to advertise an authentication mechanism, the condition
+is expanded. If it yields the empty string, ``0'', ``no'', or ``false'', the
+mechanism is not advertised.
+If the expansion fails, the mechanism is not advertised. If the failure was not
+forced, and was not caused by a lookup defer, the incident is logged.
+See section <<SECTauthexiser>> below for further discussion.
+
+
+oindex:[%server_debug_print%]
+`..'=
+%server_debug_print%, Use: 'authenticators', Type: 'string'!!, Default: 'unset'
+===
+
+If this option is set and authentication debugging is enabled (see the %-d%
+command line option), the string is expanded and included in the debugging
+output when the authenticator is run as a server. This can help with checking
+out the values of variables.
+If expansion of the string fails, the error message is written to the debugging
+output, and Exim carries on processing.
+
+
+oindex:[%server_set_id%]
+`..'=
+%server_set_id%, Use: 'authenticators', Type: 'string'!!, Default: 'unset'
+===
+
+When an Exim server successfully authenticates a client, this string is
+expanded using data from the authentication, and preserved for any incoming
+messages in the variable $authenticated_id$. It is also included in the log
+lines for incoming messages. For example, a user/password authenticator
+configuration might preserve the user name that was used to authenticate, and
+refer to it subsequently during delivery of the message.
+If expansion fails, the option is ignored.
+
+
+oindex:[%server_mail_auth_condition%]
+`..'=
+%server_mail_auth_condition%, Use: 'authenticators', Type: 'string'!!, Default: 'unset'
+===
+
+This option allows a server to discard authenticated sender addresses supplied
+as part of MAIL commands in SMTP connections that are authenticated by the
+driver on which %server_mail_auth_condition% is set. The option is not used
+as part of the authentication process; instead its (unexpanded) value is
+remembered for later use.
+How it is used is described in the following section.
+
+
+
+
+
+[[SECTauthparamail]]
+The AUTH parameter on MAIL commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[authentication,sender; authenticated]
+cindex:[AUTH,on MAIL command]
+When a client supplied an AUTH= item on a MAIL command, Exim applies
+the following checks before accepting it as the authenticated sender of the
+message:
+
+- If the connection is not using extended SMTP (that is, HELO was used rather
+than EHLO), the use of AUTH= is a syntax error.
+
+- If the value of the AUTH= parameter is ``<>'', it is ignored.
+
+- If %acl_smtp_mailauth% is defined, the ACL it specifies is run. While it is
+running, the value of $authenticated_sender$ is set to the value obtained
+from the AUTH= parameter. If the ACL does not yield ``accept'', the value of
+$authenticated_sender$ is deleted. The %acl_smtp_mailauth% ACL may not
+return ``drop'' or ``discard''. If it defers, a temporary error code (451) is given
+for the MAIL command.
+
+- If %acl_smtp_mailauth% is not defined, the value of the AUTH= parameter
+is accepted and placed in $authenticated_sender$ only if the client has
+authenticated.
+
+- If the AUTH= value was accepted by either of the two previous rules, and
+the client has authenticated, and the authenticator has a setting for the
+%server_mail_auth_condition%, the condition is checked at this point. The
+valued that was saved from the authenticator is expanded. If the expansion
+fails, or yields an empty string, ``0'', ``no'', or ``false'', the value of
+$authenticated_sender$ is deleted. If the expansion yields any other value,
+the value of $authenticated_sender$ is retained and passed on with the
+message.
+
+
+When $authenticated_sender$ is set for a message, it is passed on to other
+hosts to which Exim authenticates as a client. Do not confuse this value with
+$authenticated_id$, which is a string obtained from the authentication
+process, and which is not usually a complete email address.
+
+Whenever an AUTH= value is ignored, the incident is logged. The ACL for
+MAIL, if defined, is run after AUTH= is accepted or ignored. It can
+therefore make use of $authenticated_sender$. The converse is not true: the
+value of $sender_address$ is not yet set up when the %acl_smtp_mailauth%
+ACL is run.
+
+
+
+[[SECTauthexiser]]
+Authentication on an Exim server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[authentication,on an Exim server]
+When Exim receives an EHLO command, it advertises the public names of those
+authenticators that are configured as servers, subject to the following
+conditions:
+
+- The client host must match %auth_advertise_hosts% (default \*).
+
+- It the %server_advertise_condition% option is set, its expansion must not
+yield the empty string, ``0'', ``no'', or ``false''.
+
+The order in which the authenticators are defined controls the order in which
+the mechanisms are advertised.
+
+Some mail clients (for example, some versions of Netscape) require the user to
+provide a name and password for authentication whenever AUTH is advertised,
+even though authentication may not in fact be needed (for example, Exim may be
+set up to allow unconditional relaying from the client by an IP address check).
+You can make such clients more friendly by not advertising AUTH to them.
+For example, if clients on the 10.9.8.0/24 network are permitted (by the ACL
+that runs for RCPT) to relay without authentication, you should set
+
+ auth_advertise_hosts = ! 10.9.8.0/24
+
+so that no authentication mechanisms are advertised to them.
+
+The %server_advertise_condition% controls the advertisement of individual
+authentication mechanisms. For example, it can be used to restrict the
+advertisement of a patricular mechanism to encrypted connections, by a setting
+such as:
+
+ server_advertise_condition = ${if eq{$tls_cipher}{}{no}{yes}}
+
+If the session is encrypted, $tls_cipher$ is not empty, and so the expansion
+yields ``yes'', which allows the advertisement to happen.
+
+When an Exim server receives an AUTH command from a client, it rejects it
+immediately if AUTH was not advertised in response to an earlier EHLO
+command. This is the case if
+
+- The client host does not match %auth_advertise_hosts%; or
+
+- No authenticators are configured with server options; or
+
+- Expansion of %server_advertise_condition% blocked the advertising of all the
+server authenticators.
+
+
+Otherwise, Exim runs the ACL specified by %acl_smtp_auth% in order
+to decide whether to accept the command. If %acl_smtp_auth% is not set,
+AUTH is accepted from any client host.
+
+If AUTH is not rejected by the ACL, Exim searches its configuration for a
+server authentication mechanism that was advertised in response to EHLO and
+that matches the one named in the AUTH command. If it finds one, it runs
+the appropriate authentication protocol, and authentication either succeeds or
+fails. If there is no matching advertised mechanism, the AUTH command is
+rejected with a 504 error.
+
+When a message is received from an authenticated host, the value of
+$received_protocol$ is set to ``esmtpa'' instead of ``esmtp'', and
+$sender_host_authenticated$ contains the name (not the public name) of the
+authenticator driver that successfully authenticated the client from which the
+message was received. This variable is empty if there was no successful
+authentication.
+
+
+
+
+Testing server authentication
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[authentication,testing a server]
+cindex:[AUTH,testing a server]
+cindex:[base64 encoding,creating authentication test data]
+Exim's %-bh% option can be useful for testing server authentication
+configurations. The data for the AUTH command has to be sent using base64
+encoding. A quick way to produce such data for testing is the following Perl
+script:
+
+ use MIME::Base64;
+ printf ("%s", encode_base64(eval "\"$ARGV[0]\""));
+
+cindex:[binary zero,in authentication data]
+This interprets its argument as a Perl string, and then encodes it. The
+interpretation as a Perl string allows binary zeros, which are required for
+some kinds of authentication, to be included in the data. For example, a
+command line to run this script on such data might be
+
+ encode '\0user\0password'
+
+Note the use of single quotes to prevent the shell interpreting the
+backslashes, so that they can be interpreted by Perl to specify characters
+whose code value is zero.
+
+*Warning 1*: If either of the user or password strings starts with an octal
+digit, you must use three zeros instead of one after the leading backslash. If
+you do not, the octal digit that starts your string will be incorrectly
+interpreted as part of the code for the first character.
+
+*Warning 2*: If there are characters in the strings that Perl interprets
+specially, you must use a Perl escape to prevent them being misinterpreted. For
+example, a command such as
+
+ encode '\0user@domain.com\0pas$$word'
+
+gives an incorrect answer because of the unescaped ``@'' and ``\$'' characters.
+
+If you have the %mimencode% command installed, another way to do produce
+base64-encoded strings is to run the command
+
+ echo -e -n `\0user\0password' | mimencode
+
+The %-e% option of %echo% enables the interpretation of backslash escapes in
+the argument, and the %-n% option specifies no newline at the end of its
+output. However, not all versions of %echo% recognize these options, so you
+should check your version before relying on this suggestion.
+
+
+
+Authentication by an Exim client
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[authentication,on an Exim client]
+The ^smtp^ transport has two options called %hosts_require_auth% and
+%hosts_try_auth%. When the ^smtp^ transport connects to a server that
+announces support for authentication, and the host matches an entry in either
+of these options, Exim (as a client) tries to authenticate as follows:
+
+- For each authenticator that is configured as a client, it searches the
+authentication mechanisms announced by the server for one whose name
+matches the public name of the authenticator.
+
+- When it finds one that matches, it runs the authenticator's client code.
+The variables $host$ and $host_address$ are available for any string
+expansions that the client might do. They are set to the server's name and
+IP address. If any expansion is forced to fail, the authentication attempt
+is abandoned,
+and Exim moves on to the next authenticator.
+Otherwise an expansion failure causes delivery to be
+deferred.
+
+- If the result of the authentication attempt is a temporary error or a timeout,
+Exim abandons trying to send the message to the host for the moment. It will
+try again later. If there are any backup hosts available, they are tried in the
+usual way.
+
+- If the response to authentication is a permanent error (5xx code), Exim carries
+on searching the list of authenticators and tries another one if possible. If
+all authentication attempts give permanent errors, or if there are no attempts
+because no mechanisms match
+(or option expansions force failure),
+what happens depends on whether the host matches %hosts_require_auth% or
+%hosts_try_auth%. In the first case, a temporary error is generated, and
+delivery is deferred. The error can be detected in the retry rules, and thereby
+turned into a permanent error if you wish. In the second case, Exim tries to
+deliver the message unauthenticated.
+
+cindex:[AUTH,on MAIL command]
+When Exim has authenticated itself to a remote server, it adds the AUTH
+parameter to the MAIL commands it sends, if it has an authenticated sender
+for the message.
+If the message came from a remote host, the authenticated sender is the one
+that was receiving on an incoming MAIL command, provided that the incoming
+connection was authenticated and the %server_mail_auth% condition allowed the
+authenticated sender to be retained. If a local process calls Exim to send a
+message, the sender address that is built from the login name and
+%qualify_domain% is treated as authenticated. However, if the
+%authenticated_sender% option is set on the ^smtp^ transport, it overrides
+the authenticated sender that was received with the message.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPplaintext]]
+The plaintext authenticator
+---------------------------
+cindex:[^plaintext^ authenticator]
+cindex:[authenticators,^plaintext^]
+The ^plaintext^ authenticator can be configured to support the PLAIN and
+LOGIN authentication mechanisms, both of which transfer authentication data as
+plain (unencrypted) text (though base64 encoded). The use of plain text is a
+security risk. If you use one of these mechanisms without also making use of
+SMTP encryption (see chapter <<CHAPTLS>>) you should not use the same passwords
+for SMTP connections as you do for login accounts.
+
+
+Using plaintext in a server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^plaintext^ authenticator (server)]
+When running as a server, ^plaintext^ performs the authentication test by
+expanding a string. It has the following options:
+
+oindex:[%server_prompts%]
+`..'=
+%server_prompts%, Use: 'plaintext', Type: 'string'!!, Default: 'unset'
+===
+
+The contents of this option, after expansion, must be a colon-separated list of
+prompt strings. If expansion fails, a temporary authentication rejection is
+given.
+
+oindex:[%server_condition%]
+`..'=
+%server_condition%, Use: 'plaintext', Type: 'string'!!, Default: 'unset'
+===
+
+This option must be set in order to configure the driver as a server. Its use
+is described below.
+
+cindex:[AUTH,in ^plaintext^ authenticator]
+cindex:[binary zero,in ^plaintext^ authenticator]
+cindex:[numerical variables ($1$ $2$ etc),in ^plaintext^ authenticator]
+cindex:[base64 encoding,in ^plaintext^ authenticator]
+The data sent by the client with the AUTH command, or in response to
+subsequent prompts, is base64 encoded, and so may contain any byte values
+when decoded. If any data is supplied with the command, it is treated as a
+list of strings, separated by NULs (binary zeros), which are placed in the
+expansion variables $1$, $2$, etc. If there are more strings in
+%server_prompts% than the number of strings supplied with the AUTH
+command, the remaining prompts are used to obtain more data. Each response from
+the client may be a list of NUL-separated strings.
+
+Once a sufficient number of data strings have been received,
+%server_condition% is expanded.
+If the expansion is forced to fail, authentication fails. Any other expansion
+failure causes a temporary error code to be returned.
+If the result of a successful expansion is an empty string, ``0'', ``no'', or
+``false'', authentication fails. If the result of the expansion is ``1'', ``yes'', or
+``true'', authentication succeeds and the generic %server_set_id% option is
+expanded and saved in $authenticated_id$. For any other result, a temporary
+error code is returned, with the expanded string as the error text.
+
+*Warning*: If you use a lookup in the expansion to find the user's
+password, be sure to make the authentication fail if the user is unknown.
+There are good and bad examples at the end of the next section.
+
+
+
+The PLAIN authentication mechanism
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[PLAIN authentication mechanism]
+cindex:[authentication,PLAIN mechanism]
+cindex:[binary zero,in ^plaintext^ authenticator]
+The PLAIN authentication mechanism (RFC 2595) specifies that three strings be
+sent as one item of data (that is, one combined string containing two NUL
+separators). The data is sent either as part of the AUTH command, or
+subsequently in response to an empty prompt from the server.
+
+The second and third strings are a user name and a corresponding password.
+Using a single fixed user name and password as an example, this could be
+configured as follows:
+
+....
+fixed_plain:
+ driver = plaintext
+ public_name = PLAIN
+ server_prompts = :
+ server_condition = \
+ ${if and {{eq{$2}{username}}{eq{$3}{mysecret}}}{yes}{no}}
+ server_set_id = $2
+....
+
+The %server_prompts% setting specifies a single, empty prompt (empty items at
+the end of a string list are ignored). If all the data comes as part of the
+AUTH command, as is commonly the case, the prompt is not used. This
+authenticator is advertised in the response to EHLO as
+
+ 250-AUTH PLAIN
+
+and a client host can authenticate itself by sending the command
+
+ AUTH PLAIN AHVzZXJuYW1lAG15c2VjcmV0
+
+As this contains three strings (more than the number of prompts), no further
+data is required from the client. Alternatively, the client may just send
+
+ AUTH PLAIN
+
+to initiate authentication, in which case the server replies with an empty
+prompt. The client must respond with the combined data string.
+
+The data string is base64 encoded, as required by the RFC. This example,
+when decoded, is <'NUL'>`username`<'NUL'>`mysecret`, where <'NUL'> represents a
+zero byte. This is split up into three strings, the first of which is empty.
+The %server_condition% option in the authenticator checks that the second two
+are `username` and `mysecret` respectively.
+
+Having just one fixed user name and password, as in this example, is not very
+realistic, though for a small organization with only a handful of
+authenticating clients it could make sense.
+
+A more sophisticated instance of this authenticator could use the user name in
+$2$ to look up a password in a file or database, and maybe do an encrypted
+comparison (see %crypteq% in chapter <<CHAPexpand>>). Here is a example of this
+approach, where the passwords are looked up in a DBM file. *Warning*: This
+is an incorrect example:
+
+....
+server_condition = \
+ ${if eq{$3}{${lookup{$2}dbm{/etc/authpwd}}}{yes}{no}}
+....
+
+The expansion uses the user name ($2$) as the key to look up a password,
+which it then compares to the supplied password ($3$). Why is this example
+incorrect? It works fine for existing users, but consider what happens if a
+non-existent user name is given. The lookup fails, but as no success/failure
+strings are given for the lookup, it yields an empty string. Thus, to defeat
+the authentication, all a client has to do is to supply a non-existent user
+name and an empty password. The correct way of writing this test is:
+
+....
+server_condition = ${lookup{$2}dbm{/etc/authpwd}\
+ {${if eq{$value}{$3}{yes}{no}}}{no}}
+....
+
+In this case, if the lookup succeeds, the result is checked; if the lookup
+fails, authentication fails. If %crypteq% is being used instead of %eq%, the
+first example is in fact safe, because %crypteq% always fails if its second
+argument is empty. However, the second way of writing the test makes the logic
+clearer.
+
+
+
+The LOGIN authentication mechanism
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[LOGIN authentication mechanism]
+cindex:[authentication,LOGIN mechanism]
+The LOGIN authentication mechanism is not documented in any RFC, but is in use
+in a number of programs. No data is sent with the AUTH command. Instead, a
+user name and password are supplied separately, in response to prompts. The
+plaintext authenticator can be configured to support this as in this example:
+
+....
+fixed_login:
+ driver = plaintext
+ public_name = LOGIN
+ server_prompts = User Name : Password
+ server_condition = \
+ ${if and {{eq{$1}{username}}{eq{$2}{mysecret}}}{yes}{no}}
+ server_set_id = $1
+....
+
+Because of the way plaintext operates, this authenticator accepts data supplied
+with the AUTH command (in contravention of the specification of LOGIN), but
+if the client does not supply it (as is the case for LOGIN clients), the prompt
+strings are used to obtain two data items.
+
+Some clients are very particular about the precise text of the prompts. For
+example, Outlook Express is reported to recognize only ``Username:'' and
+``Password:''. Here is an example of a LOGIN authenticator which uses those
+strings, and which uses the %ldapauth% expansion condition to check the user
+name and password by binding to an LDAP server:
+
+....
+login:
+ driver = plaintext
+ public_name = LOGIN
+ server_prompts = Username:: : Password::
+ server_condition = ${if ldapauth \
+ {user="cn=${quote_ldap_dn:$1},ou=people,o=example.org" \
+ pass=${quote:$2} \
+ ldap://ldap.example.org/}{yes}{no}}
+ server_set_id = uid=$1,ou=people,o=example.org
+....
+
+Note the use of the %quote_ldap_dn% operator to correctly quote the DN for
+authentication. However, the basic %quote% operator, rather than any of the
+LDAP quoting operators, is the correct one to use for the password, because
+quoting is needed only to make the password conform to the Exim syntax. At the
+LDAP level, the password is an uninterpreted string.
+
+
+
+Support for different kinds of authentication
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+A number of string expansion features are provided for the purpose of
+interfacing to different ways of user authentication. These include checking
+traditionally encrypted passwords from _/etc/passwd_ (or equivalent), PAM,
+Radius, %ldapauth%, and 'pwcheck'. For details see section <<SECTexpcond>>.
+
+
+
+
+Using plaintext in a client
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^plaintext^ authenticator (client)]
+The ^plaintext^ authenticator has just one client option:
+
+
+
+oindex:[%client_send%]
+`..'=
+%client_send%, Use: 'plaintext', Type: 'string'!!, Default: 'unset'
+===
+
+The string is a colon-separated list of authentication data strings. Each
+string is independently expanded before being sent to the server. The first
+string is sent with the AUTH command; any more strings are sent in response
+to prompts from the server.
+
+*Note*: you cannot use expansion to create multiple strings, because
+splitting takes priority and happens first.
+
+Because the PLAIN authentication mechanism requires NUL (binary zero) bytes in
+the data, further processing is applied to each string before it is sent. If
+there are any single circumflex characters in the string, they are converted to
+NULs. Should an actual circumflex be required as data, it must be doubled in
+the string.
+
+This is an example of a client configuration that implements the PLAIN
+authentication mechanism with a fixed user name and password:
+
+ fixed_plain:
+ driver = plaintext
+ public_name = PLAIN
+ client_send = ^username^mysecret
+
+The lack of colons means that the entire text is sent with the AUTH
+command, with the circumflex characters converted to NULs. A similar example
+that uses the LOGIN mechanism is:
+
+ fixed_login:
+ driver = plaintext
+ public_name = LOGIN
+ client_send = : username : mysecret
+
+The initial colon means that the first string is empty, so no data is sent with
+the AUTH command itself. The remaining strings are sent in response to
+prompts.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The cram_md5 authenticator
+--------------------------
+cindex:[^cram_md5^ authenticator]
+cindex:[authenticators,^cram_md5^]
+cindex:[CRAM-MD5 authentication mechanism]
+cindex:[authentication,CRAM-MD5 mechanism]
+The CRAM-MD5 authentication mechanism is described in RFC 2195. The server
+sends a challenge string to the client, and the response consists of a user
+name and the CRAM-MD5 digest of the challenge string combined with a secret
+string (password) which is known to both server and client. Thus, the secret
+is not sent over the network as plain text, which makes this authenticator more
+secure than ^plaintext^. However, the downside is that the secret has to be
+available in plain text at either end.
+
+
+Using cram_md5 as a server
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^cram_md5^ authenticator (server)]
+This authenticator has one server option, which must be set to configure the
+authenticator as a server:
+
+oindex:[%server_secret%]
+`..'=
+%server_secret%, Use: 'cram_md5', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[numerical variables ($1$ $2$ etc),in ^cram_md5^ authenticator]
+When the server receives the client's response, the user name is placed in
+the expansion variable $1$, and %server_secret% is expanded to obtain the
+password for that user. The server then computes the CRAM-MD5 digest that the
+client should have sent, and checks that it received the correct string. If the
+expansion of %server_secret% is forced to fail, authentication fails. If the
+expansion fails for some other reason, a temporary error code is returned to
+the client.
+
+For example, the following authenticator checks that the user name given by the
+client is ``ph10'', and if so, uses ``secret'' as the password. For any other user
+name, authentication fails.
+
+ fixed_cram:
+ driver = cram_md5
+ public_name = CRAM-MD5
+ server_secret = ${if eq{$1}{ph10}{secret}fail}
+ server_set_id = $1
+
+If authentication succeeds, the setting of %server_set_id% preserves the user
+name in $authenticated_id$.
+A more tyical configuration might look up the secret string in a file, using
+the user name as the key. For example:
+
+ lookup_cram:
+ driver = cram_md5
+ public_name = CRAM-MD5
+ server_secret = ${lookup{$1}lsearch{/etc/authpwd}{$value}fail}
+ server_set_id = $1
+
+Note that this expansion explicitly forces failure if the lookup fails
+because $1$ contains an unknown user name.
+
+
+Using cram_md5 as a client
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^cram_md5^ authenticator (client)]
+When used as a client, the ^cram_md5^ authenticator has two options:
+
+
+
+oindex:[%client_name%]
+`..'=
+%client_name%, Use: 'cram_md5', Type: 'string'!!, Default: 'the primary host name'
+===
+
+This string is expanded, and the result used as the user name data when
+computing the response to the server's challenge.
+
+
+oindex:[%client_secret%]
+`..'=
+%client_secret%, Use: 'cram_md5', Type: 'string'!!, Default: 'unset'
+===
+
+This option must be set for the authenticator to work as a client. Its value is
+expanded and the result used as the secret string when computing the response.
+
+
+Different user names and secrets can be used for different servers by referring
+to $host$ or $host_address$ in the options.
+
+Forced failure of either expansion string is treated as an indication that this
+authenticator is not prepared to handle this case. Exim moves on to the next
+configured client authenticator. Any other expansion failure causes Exim to
+give up trying to send the message to the current server.
+
+A simple example configuration of a ^cram_md5^ authenticator, using fixed
+strings, is:
+
+ fixed_cram:
+ driver = cram_md5
+ public_name = CRAM-MD5
+ client_name = ph10
+ client_secret = secret
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The cyrus_sasl authenticator
+----------------------------
+cindex:[^cyrus_sasl^ authenticator]
+cindex:[authenticators,^cyrus_sasl^]
+cindex:[Cyrus, SASL library]
+The code for this authenticator was provided by Matthew Byng-Maddick of A L
+Digital Ltd (*http://www.aldigital.co.uk[]*).
+
+The ^cyrus_sasl^ authenticator provides server support for the Cyrus SASL
+library implementation of the RFC 2222 (``Simple Authentication and Security
+Layer''). This library supports a number of authentication mechanisms, including
+PLAIN and LOGIN, but also several others that Exim does not support directly.
+In particular, there is support for Kerberos authentication.
+
+The ^cyrus_sasl^ authenticator provides a gatewaying mechanism directly to
+the Cyrus interface, so if your Cyrus library can do, for example, CRAM-MD5,
+then so can the ^cyrus_sasl^ authenticator. By default it uses the public
+name of the driver to determine which mechanism to support.
+
+Where access to some kind of secret file is required, for example in GSSAPI
+or CRAM-MD5, it is worth noting that the authenticator runs as the 'exim'
+user, and that the Cyrus SASL library has no way of escalating privileges
+by default. You may also find you need to set environment variables,
+depending on the driver you are using.
+
+
+Using cyrus_sasl as a server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The ^cyrus_sasl^ authenticator has four private options. It puts the
+username (on a successful authentication) into $1$.
+
+oindex:[%server_hostname%]
+`..'=
+%server_hostname%, Use: 'cyrus_sasl', Type: 'string'!!, Default: `$primary_hostname`
+===
+
+This option selects the hostname that is used when communicating with
+the library. It is up to the underlying SASL plug-in what it does with
+this data.
+
+
+oindex:[%server_mech%]
+`..'=
+%server_mech%, Use: 'cyrus_sasl', Type: 'string', Default: `public_name`
+===
+
+This option selects the authentication mechanism this driver should
+use. It allows you to use a different underlying mechanism from the
+advertised name. For example:
+
+ sasl:
+ driver = cyrus_sasl
+ public_name = X-ANYTHING
+ server_mech = CRAM-MD5
+ server_set_id = $1
+
+
+
+oindex:[%server_realm%]
+`..'=
+%server_realm%, Use: 'cyrus_sasl', Type: 'string', Default: 'unset'
+===
+
+This specifies the SASL realm that the server claims to be in.
+
+
+oindex:[%server_service%]
+`..'=
+%server_service%, Use: 'cyrus_sasl', Type: 'string', Default: `smtp`
+===
+
+This is the SASL service that the server claims to implement.
+
+
+For straightforward cases, you do not need to set any of the authenticator's
+private options. All you need to do is to specify an appropriate mechanism as
+the public name. Thus, if you have a SASL library that supports CRAM-MD5 and
+PLAIN, you could have two authenticators as follows:
+
+ sasl_cram_md5:
+ driver = cyrus_sasl
+ public_name = CRAM-MD5
+ server_set_id = $1
+
+ sasl_plain:
+ driver = cyrus_sasl
+ public_name = PLAIN
+ server_set_id = $1
+
+
+Cyrus SASL does implement the LOGIN authentication method, even though it is
+not a standard method. It is disabled by default in the source distribution,
+but it is present in many binary distributions.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+The spa authenticator
+---------------------
+cindex:[^spa^ authenticator]
+cindex:[authenticators,^spa^]
+cindex:[authentication,Microsoft Secure Password]
+cindex:[authentication,NTLM]
+cindex:[Microsoft Secure Password Authentication]
+cindex:[NTLM authentication]
+The ^spa^ authenticator provides client support for Microsoft's 'Secure
+Password Authentication' mechanism,
+which is also sometimes known as NTLM (NT LanMan). The code for client side of
+this authenticator was contributed by Marc Prud'hommeaux, and much of it is
+taken from the Samba project (*http://www.samba.org[]*). The code for the
+server side was subsequently contributed by Tom Kistner. The mechanism works as
+follows:
+
+- After the AUTH command has been accepted, the client sends an SPA
+authentication request based on the user name and optional domain.
+
+- The server sends back a challenge.
+
+- The client builds a challenge response which makes use of the user's password
+and sends it to the server, which then accepts or rejects it.
+
+Encryption is used to protect the password in transit.
+
+
+
+Using spa as a server
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^spa^ authenticator (server)]
+The ^spa^ authenticator has just one server option:
+
+oindex:[%server_password%]
+`..'=
+%server_password%, Use: 'spa', Type: 'string'!!, Default: 'unset'
+===
+
+cindex:[numerical variables ($1$ $2$ etc),in ^spa^ authenticator]
+This option is expanded, and the result must be the cleartext password for the
+authenticating user, whose name is at this point in $1$. For example:
+
+ spa:
+ driver = spa
+ public_name = NTLM
+ server_password = ${lookup{$1}lsearch{/etc/exim/spa_clearpass}}
+
+If the expansion is forced to fail, authentication fails. Any other expansion
+failure causes a temporary error code to be returned.
+
+
+
+
+
+Using spa as a client
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[options,^spa^ authenticator (client)]
+The ^spa^ authenticator has the following client options:
+
+
+
+oindex:[%client_domain%]
+`..'=
+%client_domain%, Use: 'spa', Type: 'string'!!, Default: 'unset'
+===
+
+This option specifies an optional domain for the authentication.
+
+
+oindex:[%client_password%]
+`..'=
+%client_password%, Use: 'spa', Type: 'string'!!, Default: 'unset'
+===
+
+This option specifies the user's password, and must be set.
+
+
+oindex:[%client_username%]
+`..'=
+%client_username%, Use: 'spa', Type: 'string'!!, Default: 'unset'
+===
+
+This option specifies the user name, and must be set.
+
+
+Here is an example of a configuration of this authenticator for use with the
+mail servers at 'msn.com':
+
+ msn:
+ driver = spa
+ public_name = MSN
+ client_username = msn/msn_username
+ client_password = msn_plaintext_password
+ client_domain = DOMAIN_OR_UNSET
+
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPTLS]]
+[titleabbrev="Encrypted SMTP connections"]
+Encrypted SMTP connections using TLS/SSL
+----------------------------------------
+cindex:[encryption,on SMTP connection]
+cindex:[SMTP,encryption]
+cindex:[TLS,on SMTP connection]
+cindex:[OpenSSL]
+cindex:[GnuTLS]
+Support for TLS (Transport Layer Security), formerly known as SSL (Secure
+Sockets Layer), is implemented by making use of the OpenSSL library or the
+GnuTLS library (Exim requires GnuTLS release 1.0 or later). There is no
+cryptographic code in the Exim distribution itself for implementing TLS. In
+order to use this feature you must install OpenSSL or GnuTLS, and then build a
+version of Exim that includes TLS support (see section <<SECTinctlsssl>>). You
+also need to understand the basic concepts of encryption at a managerial level,
+and in particular, the way that public keys, private keys, and certificates are
+used.
+
+RFC 2487 defines how SMTP connections can make use of encryption. Once a
+connection is established, the client issues a STARTTLS command. If the
+server accepts this, the client and the server negotiate an encryption
+mechanism. If the negotiation succeeds, the data that subsequently passes
+between them is encrypted.
+
+Exim's ACLs can detect whether the current SMTP session is encrypted or not,
+and if so, what cipher suite is in use, whether the client supplied a
+certificate, and whether or not that certificate was verified. This makes it
+possible for an Exim server to deny or accept certain commands based on the
+encryption state.
+
+*Warning*: certain types of firewall and certain anti-virus products can
+disrupt TLS connections. You need to turn off SMTP scanning for these products
+in order to get TLS to work.
+
+
+
+Support for the legacy ``ssmtp'' (aka ``smtps'') protocol
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[ssmtp protocol]
+cindex:[smtps protocol]
+cindex:[SMTP,ssmtp protocol]
+cindex:[SMTP,smtps protocol]
+Early implementations of encrypted SMTP used a different TCP port from normal
+SMTP, and expected an encryption negotiation to start immediately, instead of
+waiting for a STARTTLS command from the client using the standard SMTP
+port. The protocol was called ``ssmtp'' or ``smtps'', and port 465 was allocated
+for this purpose.
+
+This approach was abandoned when encrypted SMTP was standardised, but there are
+still some legacy clients that use it. Exim supports these clients by means of
+the %tls_on_connect_ports% global option. Its value must be a list of port
+numbers; the most common use is expected to be:
+
+ tls_on_connect_ports = 465
+
+The port numbers specified by this option apply to all SMTP connections, both
+via the daemon and via 'inetd'. You still need to specify all the ports that
+the daemon uses (by setting %daemon_smtp_ports% or %local_interfaces% or the
+%-oX% command line option) because %tls_on_connect_ports% does not add an
+extra port -- rather, it specifies different behaviour on a port that is
+defined elsewhere.
+
+There is also a %-tls-on-connect% command line option. This overrides
+%tls_on_connect_ports%; it forces the legacy behaviour for all ports.
+
+
+
+
+
+
+[[SECTopenvsgnu]]
+OpenSSL vs GnuTLS
+~~~~~~~~~~~~~~~~~
+cindex:[TLS,OpenSSL 'vs' GnuTLS]
+The first TLS support in Exim was implemented using OpenSSL. Support for GnuTLS
+followed later, when the first versions of GnuTLS were released. To build Exim
+to use GnuTLS, you need to set
+
+ USE_GNUTLS=yes
+
+in Local/Makefile, in addition to
+
+ SUPPORT_TLS=yes
+
+You must also set TLS_LIBS and TLS_INCLUDE appropriately, so that the
+include files and libraries for GnuTLS can be found.
+
+There are some differences in usage when using GnuTLS instead of OpenSSL:
+
+- The %tls_verify_certificates% option must contain the name of a file, not the
+name of a directory (for OpenSSL it can be either).
+
+- The %tls_dhparam% option is ignored, because early versions of GnuTLS had no
+facility for varying its Diffie-Hellman parameters. I understand that this has
+changed, but Exim has not been updated to provide this facility.
+
+- GnuTLS uses RSA and D-H parameters that take a substantial amount of
+time to compute. It is unreasonable to re-compute them for every TLS
+session. Therefore, Exim keeps this data in a file in its spool
+directory, called _gnutls-params_. The file is owned by the Exim user and is
+readable only by its owner. Every Exim process that start up GnuTLS reads the
+RSA and D-H parameters from this file. If the file does not exist, the first
+Exim process that needs it computes the data and writes it to a temporary file
+which is renamed once it is complete. It does not matter if several Exim
+processes do this simultaneously (apart from wasting a few resources). Once a
+file is in place, new Exim processes immediately start using it.
++
+For maximum security, the parameters that are stored in this file should be
+recalculated periodically, the frequency depending on your paranoia level.
+Arranging this is easy; just delete the file when you want new values to be
+computed.
+
+- Distinguished Name (DN) strings reported by the OpenSSL library use a slash for
+separating fields; GnuTLS uses commas, in accordance with RFC 2253. This
+affects the value of the $tls_peerdn$ variable.
+
+- OpenSSL identifies cipher suites using hyphens as separators, for example:
+DES-CBC3-SHA. GnuTLS uses underscores, for example: RSA_ARCFOUR_SHA. What is
+more, OpenSSL complains if underscores are present in a cipher list. To make
+life simpler, Exim changes underscores to hyhens for OpenSSL and hyphens to
+underscores for GnuTLS when processing lists of cipher suites in the
+%tls_require_ciphers% options (the global option and the ^smtp^ transport
+option).
+
+- The %tls_require_ciphers% options operate differently, as described in the
+following sections.
+
+
+
+[[SECTreqciphssl]]
+Requiring specific ciphers in OpenSSL
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[TLS,requiring specific ciphers (OpenSSL)]
+cindex:[%tls_require_ciphers%,OpenSSL]
+There is a function in the OpenSSL library that can be passed a list of cipher
+suites before the cipher negotiation takes place. This specifies which ciphers
+are acceptable. The list is colon separated and may contain names like
+DES-CBC3-SHA. Exim passes the expanded value of %tls_require_ciphers%
+directly to this function call. The following quotation from the OpenSSL
+documentation specifies what forms of item are allowed in the cipher string:
+
+- It can consist of a single cipher suite such as RC4-SHA.
+
+- It can represent a list of cipher suites containing a certain algorithm,
+or cipher suites of a certain type. For example SHA1 represents all
+ciphers suites using the digest algorithm SHA1 and SSLv3 represents all
+SSL v3 algorithms.
+
+- Lists of cipher suites can be combined in a single cipher string using
+the + character. This is used as a logical and operation. For example
+SHA1+DES represents all cipher suites containing the SHA1 and the DES
+algorithms.
+
+- Each cipher string can be optionally preceded by the characters `!`, `-` or
+`+`.
++
+If `!` is used then the ciphers are permanently deleted from the list. The
+ciphers deleted can never reappear in the list even if they are explicitly
+stated.
++
+If `-` is used then the ciphers are deleted from the list, but some or all
+of the ciphers can be added again by later options.
++
+If `+` is used then the ciphers are moved to the end of the list. This
+option doesn't add any new ciphers it just moves matching existing ones.
++
+If none of these characters is present then the string is just interpreted as
+a list of ciphers to be appended to the current preference list. If the list
+includes any ciphers already present they will be ignored: that is, they will
+not moved to the end of the list.
+
+
+
+
+[[SECTreqciphgnu]]
+Requiring specific ciphers in GnuTLS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[TLS,requiring specific ciphers (GnuTLS)]
+cindex:[%tls_require_ciphers%,GnuTLS]
+The GnuTLS library does not have a combined function like OpenSSL. Instead,
+it allows the caller to specify separate lists of key-exchange methods,
+main cipher algorithms, and MAC algorithms. Unfortunately, these lists are
+numerical, and the library does not have a function for turning names into
+numbers. Consequently, the list of recognized names has to be built into
+the application.
+
+At present, Exim permits only the list of main cipher algorithms to be
+changed. The %tls_require_ciphers% option is in the same format as for
+OpenSSL. Exim searches each item for the name of available algorithm. For
+example, if the list contains RSA_AES_SHA then AES is recognized.
+
+The cipher algorithms list starts out with a default set of algorithms. If
+the first item in %tls_require_ciphers% does 'not' start with an
+exclamation mark, all the default items are deleted. Thus, only those specified
+can be used. If the first item in %tls_require_ciphers% 'does' start with
+an exclamation mark, the defaults are left on the list.
+
+Then, any item that starts with an exclamation mark causes the relevent
+algorithms to be removed from the list, and any item that does not start
+with an exclamation mark causes the relevant algorithms to be added to the
+list. Thus,
+
+ tls_require_ciphers = !RSA_ARCFOUR_SHA
+
+allows all the defaults except those that use ARCFOUR, whereas
+
+ tls_require_ciphers = AES : 3DES
+
+allows only cipher suites that use AES and 3DES. The currently recognized
+algorithms are: AES_256, AES_128, AES (both of the preceding), 3DES, and
+ARCFOUR_128. Unrecognized algorithms are ignored. In a server, the order of the
+list is unimportant; the server will advertise the availability of all the
+relevant cipher suites. However, in a client, the order of the list specifies a
+preference order for the algorithms. The first one in the client's list that is
+also advertised by the server is tried first. The default order is as listed
+above.
+
+
+
+
+Configuring an Exim server to use TLS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[TLS,configuring an Exim server]
+When Exim has been built with TLS support, it advertises the availability of
+the STARTTLS command to client hosts that match %tls_advertise_hosts%,
+but not to any others. The default value of this option is unset, which means
+that STARTTLS is not advertised at all. This default is chosen because you
+need to set some other options in order to make TLS avaliable, and also it is
+sensible for systems that want to use TLS only as a client.
+
+If a client issues a STARTTLS command and there is some configuration
+problem in the server, the command is rejected with a 454 error. If the client
+persists in trying to issue SMTP commands, all except QUIT are rejected
+with the error
+
+ 554 Security failure
+
+If a STARTTLS command is issued within an existing TLS session, it is
+rejected with a 554 error code.
+
+To enable TLS operations on a server, you must set %tls_advertise_hosts% to
+match some hosts. You can, of course, set it to \* to match all hosts.
+However, this is not all you need to do. TLS sessions to a server won't work
+without some further configuration at the server end.
+
+It is rumoured that all existing clients that support TLS/SSL use RSA
+encryption. To make this work you need to set, in the server,
+
+ tls_certificate = /some/file/name
+ tls_privatekey = /some/file/name
+
+The first file contains the server's X509 certificate, and the second contains
+the private key that goes with it. These files need to be readable by the Exim
+user, and must always be given as full path names. They can be the same file if
+both the certificate and the key are contained within it. If %tls_privatekey%
+is not set, this is assumed to be the case. The certificate file may also
+contain intermediate certificates that need to be sent to the client to enable
+it to authenticate the server's certificate.
+
+If you do not understand about certificates and keys, please try to find a
+source of this background information, which is not Exim-specific. (There are a
+few comments below in section <<SECTcerandall>>.)
+
+*Note*: These options do not apply when Exim is operating as a client --
+they apply only in the case of a server. For a client, you must set the options
+of the same name in an ^smtp^ transport.
+
+With just these options, Exim will work as a server with clients such as
+Netscape. It does not require the client to have a certificate (but see below
+for how to insist on this). There is one other option that may be needed in
+other situations. If
+
+ tls_dhparam = /some/file/name
+
+is set, the SSL library is initialized for the use of Diffie-Hellman ciphers
+with the parameters contained in the file. This increases the set of cipher
+suites that the server supports. See the command
+
+ openssl dhparam
+
+for a way of generating this data.
+At present, %tls_dhparam% is used only when Exim is linked with OpenSSL. It is
+ignored if GnuTLS is being used.
+
+The strings supplied for these three options are expanded every time a client
+host connects. It is therefore possible to use different certificates and keys
+for different hosts, if you so wish, by making use of the client's IP address
+in $sender_host_address$ to control the expansion. If a string expansion is
+forced to fail, Exim behaves as if the option is not set.
+
+cindex:[cipher,logging]
+cindex:[log,TLS cipher]
+The variable $tls_cipher$ is set to the cipher suite that was negotiated for
+an incoming TLS connection. It is included in the 'Received:' header of an
+incoming message (by default -- you can, of course, change this), and it is
+also included in the log line that records a message's arrival, keyed by ``X='',
+unless the %tls_cipher% log selector is turned off.
+The %encrypted% condition can be used to test for specific cipher suites in
+ACLs.
+
+The ACLs that run for subsequent SMTP commands can check the name of the cipher
+suite and vary their actions accordingly. The cipher suite names are those used
+by OpenSSL. These may differ from the names used elsewhere. For example,
+OpenSSL uses the name DES-CBC3-SHA for the cipher suite which in other contexts
+is known as TLS_RSA_WITH_3DES_EDE_CBC_SHA. Check the OpenSSL
+documentation for more details.
+
+
+
+Requesting and verifying client certificates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[certificate,verification of client]
+cindex:[TLS,client certificate verification]
+If you want an Exim server to request a certificate when negotiating a TLS
+session with a client, you must set either %tls_verify_hosts% or
+%tls_try_verify_hosts%. You can, of course, set either of them to \* to
+apply to all TLS connections. For any host that matches one of these options,
+Exim requests a certificate as part of the setup of the TLS session. The
+contents of the certificate are verified by comparing it with a list of
+expected certificates. These must be available in a file or,
+for OpenSSL only (not GnuTLS), a directory, identified by
+%tls_verify_certificates%.
+
+A file can contain multiple certificates, concatenated end to end. If a
+directory is used
+(OpenSSL only),
+each certificate must be in a separate file, with a name (or a symbolic link)
+of the form <'hash'>.0, where <'hash'> is a hash value constructed from the
+certificate. You can compute the relevant hash by running the command
+
+ openssl x509 -hash -noout -in /cert/file
+
+where _/cert/file_ contains a single certificate.
+
+The difference between %tls_verify_hosts% and %tls_try_verify_hosts% is
+what happens if the client does not supply a certificate, or if the certificate
+does not match any of the certificates in the collection named by
+%tls_verify_certificates%. If the client matches %tls_verify_hosts%, the
+attempt to set up a TLS session is aborted, and the incoming connection is
+dropped. If the client matches %tls_try_verify_hosts%, the (encrypted) SMTP
+session continues. ACLs that run for subsequent SMTP commands can detect the
+fact that no certificate was verified, and vary their actions accordingly. For
+example, you can insist on a certificate before accepting a message for
+relaying, but not when the message is destined for local delivery.
+
+When a client supplies a certificate (whether it verifies or not), the value of
+the Distinguished Name of the certificate is made available in the variable
+$tls_peerdn$ during subsequent processing of the message.
+
+cindex:[log,distinguished name]
+Because it is often a long text string, it is not included in the log line or
+'Received:' header by default. You can arrange for it to be logged, keyed by
+``DN='', by setting the %tls_peerdn% log selector, and you can use
+%received_header_text% to change the 'Received:' header. When no certificate
+is supplied, $tls_peerdn$ is empty.
+
+
+Revoked certificates
+~~~~~~~~~~~~~~~~~~~~
+cindex:[TLS,revoked certificates]
+cindex:[revocation list]
+cindex:[certificate,revocation list]
+Certificate issuing authorities issue Certificate Revocation Lists (CRLs) when
+certificates are revoked. If you have such a list, you can pass it to an Exim
+server using the global option called %tls_crl% and to an Exim client using an
+identically named option for the ^smtp^ transport. In each case, the value of
+the option is expanded and must then be the name of a file that contains a CRL
+in PEM format.
+
+
+Configuring an Exim client to use TLS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[cipher,logging]
+cindex:[log,TLS cipher]
+cindex:[log,distinguished name]
+cindex:[TLS,configuring an Exim client]
+The %tls_cipher% and %tls_peerdn% log selectors apply to outgoing SMTP
+deliveries as well as to incoming, the latter one causing logging of the
+server certificate's DN. The remaining client configuration for TLS is all
+within the ^smtp^ transport.
+
+It is not necessary to set any options to have TLS work in the ^smtp^
+transport. If Exim is built with TLS support, and TLS is advertised by a
+server, the ^smtp^ transport always tries to start a TLS session. However,
+this can be prevented by setting %hosts_avoid_tls% (an option of the
+transport) to a list of server hosts for which TLS should not be used.
+
+If you do not want Exim to attempt to send messages unencrypted when an attempt
+to set up an encrypted connection fails in any way, you can set
+%hosts_require_tls% to a list of hosts for which encryption is mandatory. For
+those hosts, delivery is always deferred if an encrypted connection cannot be
+set up. If there are any other hosts for the address, they are tried in the
+usual way.
+
+When the server host is not in %hosts_require_tls%, Exim may try to deliver
+the message unencrypted. It always does this if the response to STARTTLS is
+a 5##'xx' code. For a temporary error code, or for a failure to negotiate a TLS
+session after a success response code, what happens is controlled by the
+%tls_tempfail_tryclear% option of the ^smtp^ transport. If it is false,
+delivery to this host is deferred, and other hosts (if available) are tried. If
+it is true, Exim attempts to deliver unencrypted after a 4##'xx' response to
+STARTTLS, and if STARTTLS is accepted, but the subsequent TLS
+negotiation fails, Exim closes the current connection (because it is in an
+unknown state), opens a new one to the same host, and then tries the delivery
+unencrypted.
+
+
+The %tls_certificate% and %tls_privatekey% options of the ^smtp^ transport
+provide the client with a certificate, which is passed to the server if it
+requests it. If the server is Exim, it will request a certificate only if
+%tls_verify_hosts% or %tls_try_verify_hosts% matches the client.
+*Note*: these options must be set in the ^smtp^ transport for Exim to use
+TLS when it is operating as a client. Exim does not assume that a server
+certificate (set by the global options of the same name) should also be used
+when operating as a client.
+
+If %tls_verify_certificates% is set, it must name a file or,
+for OpenSSL only (not GnuTLS), a directory, that contains a collection of
+expected server certificates. The client verifies the server's certificate
+against this collection, taking into account any revoked certificates that are
+in the list defined by %tls_crl%.
+
+If
+%tls_require_ciphers% is set on the ^smtp^ transport, it must contain a
+list of permitted cipher suites. If either of these checks fails, delivery to
+the current host is abandoned, and the ^smtp^ transport tries to deliver to
+alternative hosts, if any.
+
+All the TLS options in the ^smtp^ transport are expanded before use, with
+$host$ and $host_address$ containing the name and address of the server to
+which the client is connected. Forced failure of an expansion causes Exim to
+behave as if the relevant option were unset.
+
+
+
+[[SECTmulmessam]]
+Multiple messages on the same encrypted TCP/IP connection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[multiple SMTP deliveries with TLS]
+cindex:[TLS,multiple message deliveries]
+Exim sends multiple messages down the same TCP/IP connection by starting up
+an entirely new delivery process for each message, passing the socket from
+one process to the next. This implementation does not fit well with the use
+of TLS, because there is quite a lot of state information associated with a TLS
+connection, not just a socket identification. Passing all the state information
+to a new process is not feasible. Consequently, Exim shuts down an existing TLS
+session before passing the socket to a new process. The new process may then
+try to start a new TLS session, and if successful, may try to re-authenticate
+if AUTH is in use, before sending the next message.
+
+The RFC is not clear as to whether or not an SMTP session continues in clear
+after TLS has been shut down, or whether TLS may be restarted again later, as
+just described. However, if the server is Exim, this shutdown and
+reinitialization works. It is not known which (if any) other servers operate
+successfully if the client closes a TLS session and continues with unencrypted
+SMTP, but there are certainly some that do not work. For such servers, Exim
+should not pass the socket to another process, because the failure of the
+subsequent attempt to use it would cause Exim to record a temporary host error,
+and delay other deliveries to that host.
+
+To test for this case, Exim sends an EHLO command to the server after
+closing down the TLS session. If this fails in any way, the connection is
+closed instead of being passed to a new delivery process, but no retry
+information is recorded.
+
+There is also a manual override; you can set %hosts_nopass_tls% on the
+^smtp^ transport to match those hosts for which Exim should not pass
+connections to new processes if TLS has been used.
+
+
+
+
+[[SECTcerandall]]
+Certificates and all that
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[certificate,references to discussion]
+In order to understand fully how TLS works, you need to know about
+certificates, certificate signing, and certificate authorities. This is not the
+place to give a tutorial, especially as I do not know very much about it
+myself. Some helpful introduction can be found in the FAQ for the SSL addition
+to Apache, currently at
+
+&&&
+*http://www.modssl.org/docs/2.7/ssl_faq.html#ToC24[]*
+&&&
+
+Other parts of the 'modssl' documentation are also helpful, and have
+links to further files.
+Eric Rescorla's book, 'SSL and TLS', published by Addison-Wesley (ISBN
+0-201-61598-3), contains both introductory and more in-depth descriptions.
+Some sample programs taken from the book are available from
+
+&&&
+*http://www.rtfm.com/openssl-examples/[]*
+&&&
+
+
+
+Certificate chains
+~~~~~~~~~~~~~~~~~~
+The file named by %tls_certificate% may contain more than one
+certificate. This is useful in the case where the certificate that is being
+sent is validated by an intermediate certificate which the other end does
+not have. Multiple certificates must be in the correct order in the file.
+First the host's certificate itself, then the first intermediate
+certificate to validate the issuer of the host certificate, then the next
+intermediate certificate to validate the issuer of the first intermediate
+certificate, and so on, until finally (optionally) the root certificate.
+The root certificate must already be trusted by the recipient for
+validation to succeed, of course, but if it's not preinstalled, sending the
+root certificate along with the rest makes it available for the user to
+install if the receiving end is a client MUA that can interact with a user.
+
+
+Self-signed certificates
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[certificate,self-signed]
+You can create a self-signed certificate using the 'req' command provided
+with OpenSSL, like this:
+
+....
+openssl req -x509 -newkey rsa:1024 -keyout file1 -out file2 \
+ -days 9999 -nodes
+....
+
+_file1_ and _file2_ can be the same file; the key and the certificate are
+delimited and so can be identified independently. The %-days% option
+specifies a period for which the certificate is valid. The %-nodes% option is
+important: if you do not set it, the key is encrypted with a passphrase
+that you are prompted for, and any use that is made of the key causes more
+prompting for the passphrase. This is not helpful if you are going to use
+this certificate and key in an MTA, where prompting is not possible.
+
+A self-signed certificate made in this way is sufficient for testing, and
+may be adequate for all your requirements if you are mainly interested in
+encrypting transfers, and not in secure identification.
+
+However, many clients require that the certificate presented by the server be a
+user (also called ``leaf'' or ``site'') certificate, and not a self-signed
+certificate. In this situation, the self-signed certificate described above
+must be installed on the client host as a trusted root 'certification
+authority' (CA), and the certificate used by Exim must be a user certificate
+signed with that self-signed certificate.
+
+For information on creating self-signed CA certificates and using them to sign
+user certificates, see the 'General implementation overview' chapter of the
+Open-source PKI book, available online at *http://ospkibook.sourceforge.net/[]*.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPACL]]
+Access control lists
+--------------------
+cindex:[{ACL},description]
+cindex:[control of incoming mail]
+cindex:[message,controlling incoming]
+cindex:[policy control,access control lists]
+Access Control Lists (ACLs) are defined in a separate section of the run time
+configuration file, headed by ``begin acl''. Each ACL definition starts with a
+name, terminated by a colon. Here is a complete ACL section that contains just
+one very small ACL:
+
+ begin acl
+
+ small_acl:
+ accept hosts = one.host.only
+
+You can have as many lists as you like in the ACL section, and the order in
+which they appear does not matter. The lists are self-terminating.
+
+The majority of ACLs are used to control Exim's behaviour when it receives
+certain SMTP commands. This applies both to incoming TCP/IP connections, and
+when a local process submits a message using SMTP by specifying the %-bs%
+option. The most common use is for controlling which recipients are accepted
+in incoming messages. In addition, you can define an ACL that is used to check
+local non-SMTP messages. The default configuration file contains an example of
+a realistic ACL for checking RCPT commands. This is discussed in chapter
+<<CHAPdefconfil>>.
+
+
+Testing ACLs
+~~~~~~~~~~~~
+The %-bh% command line option provides a way of testing your ACL configuration
+locally by running a fake SMTP session with which you interact. The host
+'relay-test.mail-abuse.org' provides a service for checking your relaying
+configuration (see section <<SECTcheralcon>> for more details).
+
+
+
+Specifying when ACLs are used
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[{ACL},options for specifying]
+In order to cause an ACL to be used, you have to name it in one of the relevant
+options in the main part of the configuration. These options are:
+cindex:[AUTH,ACL for]
+cindex:[DATA, ACLs for]
+cindex:[ETRN,ACL for]
+cindex:[EXPN,ACL for]
+cindex:[HELO,ACL for]
+cindex:[EHLO,ACL for]
+cindex:[MAIL,ACL for]
+cindex:[QUIT, ACL for]
+cindex:[RCPT,ACL for]
+cindex:[STARTTLS, ACL for]
+cindex:[VRFY,ACL for]
+cindex:[SMTP connection, ACL for]
+cindex:[non-smtp message, ACL for]
+
+[frame="none"]
+`--`--------------------`---------------------------------------
+ %acl_not_smtp% ACL for non-SMTP messages
+ %acl_smtp_auth% ACL for AUTH
+ %acl_smtp_connect% ACL for start of SMTP connection
+ %acl_smtp_data% ACL after DATA is complete
+ %acl_smtp_etrn% ACL for ETRN
+ %acl_smtp_expn% ACL for EXPN
+ %acl_smtp_helo% ACL for HELO or EHLO
+ %acl_smtp_mail% ACL for MAIL
+ %acl_smtp_mailauth% ACL for the AUTH parameter of MAIL
+ %acl_smtp_mime% ACL for content-scanning MIME parts
+ %acl_smtp_predata% ACL at start of DATA command
+ %acl_smtp_quit% ACL for QUIT
+ %acl_smtp_rcpt% ACL for RCPT
+ %acl_smtp_starttls% ACL for STARTTLS
+ %acl_smtp_vrfy% ACL for VRFY
+----------------------------------------------------------------
+
+For example, if you set
+
+ acl_smtp_rcpt = small_acl
+
+the little ACL defined above is used whenever Exim receives a RCPT command
+in an SMTP dialogue. The majority of policy tests on incoming messages can be
+done when RCPT commands arrive. A rejection of RCPT should cause the
+sending MTA to give up on the recipient address contained in the RCPT
+command, whereas rejection at other times may cause the client MTA to keep on
+trying to deliver the message. It is therefore recommended that you do as much
+testing as possible at RCPT time.
+
+
+The non-SMTP ACL
+~~~~~~~~~~~~~~~~
+cindex:[non-smtp message, ACL for]
+The non-SMTP ACL applies to all non-interactive incoming messages, that is, it
+applies to batch SMTP as well as to non-SMTP messages. (Batch SMTP is not
+really SMTP.) This ACL is run just before the 'local_scan()' function. Any
+kind of rejection is treated as permanent, because there is no way of sending a
+temporary error for these kinds of message. Many of the ACL conditions (for
+example, host tests, and tests on the state of the SMTP connection such as
+encryption and authentication) are not relevant and are forbidden in this ACL.
+
+
+The connect ACL
+~~~~~~~~~~~~~~~
+cindex:[SMTP connection, ACL for]
+The ACL test specified by %acl_smtp_connect% happens after the test specified
+by %host_reject_connection% (which is now an anomaly) and any TCP Wrappers
+testing (if configured).
+
+
+The DATA ACLs
+~~~~~~~~~~~~~
+cindex:[DATA, ACLs for]
+Two ACLs are associated with the DATA command, because it is two-stage
+command, with two responses being sent to the client.
+When the DATA command is received, the ACL defined by %acl_smtp_predata%
+is obeyed. This gives you control after all the RCPT commands, but before
+the message itself is received. It offers the opportunity to give a negative
+response to the DATA command before the data is transmitted. Header lines
+added by MAIL or RCPT ACLs are not visible at this time, but any that
+are defined here are visible when the %acl_smtp_data% ACL is run.
+
+You cannot test the contents of the message, for example, to verify addresses
+in the headers, at RCPT time or when the DATA command is received. Such
+tests have to appear in the ACL that is run after the message itself has been
+received, before the final response to the DATA command is sent. This is
+the ACL specified by %acl_smtp_data%, which is the second ACL that is
+associated with the DATA command.
+
+For both of these ACLs, it is not possible to reject individual recipients. An
+error response rejects the entire message. Unfortunately, it is known that some
+MTAs do not treat hard (5##'xx') responses to the DATA command (either
+before or after the data) correctly -- they keep the message on their queues
+and try again later, but that is their problem, though it does waste some of
+your resources.
+
+
+The MIME ACL
+~~~~~~~~~~~~
+The %acl_smtp_mime% option is available only when Exim is compiled with the
+content-scanning extension. For details, see chapter <<CHAPexiscan>>.
+
+
+[[SECTQUITACL]]
+The QUIT ACL
+~~~~~~~~~~~~
+cindex:[QUIT, ACL for]
+The ACL for the SMTP QUIT command is anomalous, in that the
+outcome of the ACL does not affect the response code to QUIT,
+which is always 221. Thus, the ACL does not in fact control any access.
+For this reason, the only verbs that are permitted are %accept% and %warn%.
+
+This ACL can be used for tasks such as custom logging at the end of an SMTP
+session. For example, you can use ACL variables in other ACLs to count
+messages, recipients, etc., and log the totals at QUIT time using one or
+more %logwrite% modifiers on a %warn% verb.
+
+You do not need to have a final %accept%, but if you do, you can use a
+%message% modifier to specify custom text that is sent as part of the 221
+response to QUIT.
+
+This ACL is run only for a ``normal'' QUIT. For certain kinds of disastrous
+failure (for example, failure to open a log file, or when Exim is bombing out
+because it has detected an unrecoverable error), all SMTP commands from the
+client are given temporary error responses until QUIT is received or the
+connection is closed. In these special cases, the QUIT ACL does not run.
+
+
+
+Finding an ACL to use
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[{ACL},finding which to use]
+The value of an %acl_smtp_'xxx'% option is expanded before use, so you can
+use different ACLs in different circumstances. The resulting string does not
+have to be the name of an ACL in the configuration file; there are other
+possibilities. Having expanded the string, Exim searches for an ACL as follows:
+
+- If the string begins with a slash, Exim uses it as a file name, and reads its
+contents as an ACL. The lines are processed in the same way as lines in the
+Exim configuration file. In particular, continuation lines are supported, blank
+lines are ignored, as are lines whose first non-whitespace character is ``#''.
+If the file does not exist or cannot be read, an error occurs (typically
+causing a temporary failure of whatever caused the ACL to be run). For example:
++
+....
+acl_smtp_data = /etc/acls/\
+ ${lookup{$sender_host_address}lsearch\
+ {/etc/acllist}{$value}{default}}
+....
++
+This looks up an ACL file to use on the basis of the host's IP address, falling
+back to a default if the lookup fails. If an ACL is successfully read from a
+file, it is retained in memory for the duration of the Exim process, so that it
+can be re-used without having to re-read the file.
+
+- If the string does not start with a slash, and does not contain any spaces,
+Exim searches the ACL section of the configuration for an ACL whose name
+matches the string.
+
+- If no named ACL is found, or if the string contains spaces, Exim parses
+the string as an inline ACL. This can save typing in cases where you just
+want to have something like
++
+ acl_smtp_vrfy = accept
++
+in order to allow free use of the VRFY command. Such a string may contain
+newlines; it is processed in the same way as an ACL that is read from a file.
+
+
+
+
+ACL return codes
+~~~~~~~~~~~~~~~~
+cindex:[{ACL},return codes]
+Except for the QUIT ACL, which does not affect the SMTP return code (see
+section <<SECTQUITACL>> above), the
+
+result of running an ACL is either ``accept'' or ``deny'', or, if some test
+cannot be completed (for example, if a database is down), ``defer''. These
+results cause 2##'xx', 5##'xx', and 4##'xx' return codes, respectively, to be
+used in the SMTP dialogue. A fourth return, ``error'', occurs when there is an
+error such as invalid syntax in the ACL. This also causes a 4'##xx' return
+code.
+
+For the non-SMTP ACL, ``defer'' and ``error'' are treated in the same way as
+``deny'', because there is no mechanism for passing temporary errors to the
+submitters of non-SMTP messages.
+
+
+ACLs that are relevant to message reception may also return ``discard''. This
+has the effect of ``accept'', but causes either the entire message or an
+individual recipient address to be discarded. In other words, it is a
+blackholing facility. Use it with care.
+
+If the ACL for MAIL returns ``discard'', all recipients are discarded, and no
+ACL is run for subsequent RCPT commands. The effect of ``discard'' in a
+RCPT ACL is to discard just the one recipient address. If there are no
+recipients left when the message's data is received, the DATA ACL is not
+run. A ``discard'' return from the DATA or the non-SMTP ACL discards all the
+remaining recipients.
+
+The ``discard'' return is not permitted for the %acl_smtp_predata% ACL.
+
+
+cindex:['local_scan()' function,when all recipients discarded]
+The 'local_scan()' function is always run, even if there are no remaining
+recipients; it may create new recipients.
+
+
+
+Unset ACL options
+~~~~~~~~~~~~~~~~~
+cindex:[{ACL},unset options]
+The default actions when any of the %acl_'xxx'% options are unset are not
+all the same. *Note*: These defaults apply only when the relevant ACL is
+not defined at all. For any defined ACL, the default action when control reaches
+the end of the ACL statements is ``deny''.
+
+For %acl_not_smtp%, %acl_smtp_auth%, %acl_smtp_connect%, %acl_smtp_data%,
+%acl_smtp_helo%, %acl_smtp_mail%, %acl_smtp_mailauth%, %acl_smtp_mime%,
+%acl_smtp_predata%, %acl_smtp_quit%, and %acl_smtp_starttls%, the action when
+the ACL is not defined is ``accept''.
+
+For the others (%acl_smtp_etrn%, %acl_smtp_expn%, %acl_smtp_rcpt%, and
+%acl_smtp_vrfy%), the action when the ACL is not defined is ``deny''.
+This means that %acl_smtp_rcpt% must be defined in order to receive any
+messages over an SMTP connection. For an example, see the ACL in the default
+configuration file.
+
+
+
+
+Data for message ACLs
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[{ACL},data for message ACL]
+When a MAIL or RCPT ACL, or either of the DATA ACLs, is running,
+the variables that contain information about the host and the message's sender
+(for example, $sender_host_address$ and $sender_address$) are set, and
+can be used in ACL statements. In the case of RCPT (but not MAIL or
+DATA), $domain$ and $local_part$ are set from the argument address.
+
+When an ACL for the AUTH parameter of MAIL is running, the variables that
+contain information about the host are set, but $sender_address$ is not yet
+set. Section <<SECTauthparamail>> contains a discussion of this parameter and
+how it is used.
+
+The $message_size$ variable is set to the value of the SIZE parameter on
+the MAIL command at MAIL, RCPT and pre-data time, or to -1 if
+that parameter is not given. The value is updated to the true message size by
+the time the final DATA ACL is run (after the message data has been
+received).
+
+The $rcpt_count$ variable increases by one for each RCPT command
+received. The $recipients_count$ variable increases by one each time a
+RCPT command is accepted, so while an ACL for RCPT is being processed,
+it contains the number of previously accepted recipients. At DATA time (for
+both the DATA ACLs), $rcpt_count$ contains the total number of RCPT
+commands, and $recipients_count$ contains the total number of accepted
+recipients.
+
+
+
+
+
+[[SECTdatfornon]]
+Data for non-message ACLs
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[{ACL},data for non-message ACL]
+When an ACL is being run for AUTH, EHLO, ETRN, EXPN, HELO, STARTTLS, or VRFY,
+the remainder of the SMTP command line is placed in $smtp_command_argument$.
+This can be tested using a %condition% condition. For example, here is an ACL
+for use with AUTH, which insists that either the session is encrypted, or the
+CRAM-MD5 authentication method is used. In other words, it does not permit
+authentication methods that use cleartext passwords on unencrypted connections.
+
+....
+acl_check_auth:
+ accept encrypted = *
+ accept condition = ${if eq{${uc:$smtp_command_argument}}\
+ {CRAM-MD5}}
+ deny message = TLS encryption or CRAM-MD5 required
+....
+
+(Another way of applying this restriction is to arrange for the authenticators
+that use cleartext passwords not to be advertised when the connection is not
+encrypted. You can use the generic %server_advertise_condition% authenticator
+option to do this.)
+
+
+
+Format of an ACL
+~~~~~~~~~~~~~~~~
+cindex:[{ACL},format of]
+cindex:[{ACL},verbs; definition of]
+An individual ACL consists of a number of statements. Each statement starts
+with a verb, optionally followed by a number of conditions and ``modifiers''.
+Modifiers can change the way the verb operates, define error and log messages,
+set variables, insert delays, and vary the processing of accepted messages.
+
+If all the conditions are met, the verb is obeyed. The same condition may be
+used (with different arguments) more than once in the same statement. This
+provides a means of specifying an ``and'' conjunction between conditions. For
+example:
+
+ deny dnslists = list1.example
+ dnslists = list2.example
+
+If there are no conditions, the verb is always obeyed. Exim stops evaluating
+the conditions and modifiers when it reaches a condition that fails. What
+happens then depends on the verb (and in one case, on a special modifier). Not
+all the conditions make sense at every testing point. For example, you cannot
+test a sender address in the ACL that is run for a VRFY command.
+
+
+ACL verbs
+~~~~~~~~~
+The ACL verbs are as follows:
+
+- cindex:[%accept%, ACL verb]
+%accept%: If all the conditions are met, the ACL returns ``accept''. If any of
+the conditions are not met, what happens depends on whether %endpass% appears
+among the conditions (for syntax see below). If the failing condition is before
+%endpass%, control is passed to the next ACL statement; if it is after
+%endpass%, the ACL returns ``deny''. Consider this statement, used to check a
+RCPT command:
+
+ accept domains = +local_domains
+ endpass
+ verify = recipient
++
+If the recipient domain does not match the %domains% condition, control passes
+to the next statement. If it does match, the recipient is verified, and the
+command is accepted if verification succeeds. However, if verification fails,
+the ACL yields ``deny'', because the failing condition is after %endpass%.
+
+- cindex:[%defer%, ACL verb]
+%defer%: If all the conditions are met, the ACL returns ``defer'' which, in an
+SMTP session, causes a 4##'xx' response to be given. For a non-SMTP ACL,
+%defer% is the same as %deny%, because there is no way of sending a temporary
+error. For a RCPT command, %defer% is much the same as using a
+^redirect^ router and `:defer:` while verifying, but the %defer% verb can
+be used in any ACL, and even for a recipient it might be a simpler approach.
+
+- cindex:[%deny%, ACL verb]
+%deny%: If all the conditions are met, the ACL returns ``deny''. If any of the
+conditions are not met, control is passed to the next ACL statement. For
+example,
+
+ deny dnslists = blackholes.mail-abuse.org
++
+rejects commands from hosts that are on a DNS black list.
+
+- cindex:[%discard%, ACL verb]
+%discard%: This verb behaves like %accept%, except that it returns ``discard''
+from the ACL instead of ``accept''. It is permitted only on ACLs that are
+concerned with receiving messages, and it causes recipients to be discarded.
+If the %log_message% modifier is set when %discard% operates, its contents are
+added to the line that is automatically written to the log.
++
+If %discard% is used in an ACL for RCPT, just the one recipient is
+discarded; if used for MAIL, DATA or in the non-SMTP ACL, all the
+message's recipients are discarded. Recipients that are discarded before
+DATA do not appear in the log line when the %log_recipients% log selector
+is set.
+
+- cindex:[%drop%, ACL verb]
+%drop%: This verb behaves like %deny%, except that an SMTP connection is
+forcibly closed after the 5##'xx' error message has been sent. For example:
+
+ drop message = I don't take more than 20 RCPTs
+
+ condition = ${if > {$rcpt_count}{20}}
++
+There is no difference between %deny% and %drop% for the connect-time ACL. The
+connection is always dropped after sending a 550 response.
+
+- cindex:[%require%, ACL verb]
+%require%: If all the conditions are met, control is passed to the next ACL
+statement. If any of the conditions are not met, the ACL returns ``deny''. For
+example, when checking a RCPT command,
+
+ require verify = sender
++
+passes control to subsequent statements only if the message's sender can be
+verified. Otherwise, it rejects the command.
+
+- cindex:[%warn%, ACL verb]
+%warn%: If all the conditions are met, a header line is added to an incoming
+message and/or a line is written to Exim's main log. In all cases, control
+passes to the next ACL statement. The text of the added header line and the log
+line are specified by modifiers; if they are not present, a %warn% verb just
+checks its conditions and obeys any ``immediate'' modifiers such as %set% and
+%logwrite%. There is more about adding header lines in section
+<<SECTaddheadwarn>>.
++
+If any condition on a %warn% statement cannot be completed (that is, there is
+some sort of defer), no header lines are added and the configured log line is
+not written. No further conditions or modifiers in the %warn% statement are
+processed. The incident is logged, but the ACL continues to be processed, from
+the next statement onwards.
++
+If a %message% modifier is present on a %warn% verb in an ACL that is not
+testing an incoming message, it is ignored, and the incident is logged.
++
+A %warn% statement may use the %log_message% modifier to cause a line to be
+written to the main log when the statement's conditions are true.
+If an identical log line is requested several times in the same message, only
+one copy is actually written to the log. If you want to force duplicates to be
+written, use the %logwrite% modifier instead.
++
+When one of the %warn% conditions is an address verification that fails, the
+text of the verification failure message is in $acl_verify_message$. If you
+want this logged, you must set it up explicitly. For example:
+
+ warn !verify = sender
+ log_message = sender verify failed: $acl_verify_message
+
+At the end of each ACL there is an implicit unconditional %deny%.
+
+As you can see from the examples above, the conditions and modifiers are
+written one to a line, with the first one on the same line as the verb, and
+subsequent ones on following lines. If you have a very long condition, you can
+continue it onto several physical lines by the usual backslash continuation
+mechanism. It is conventional to align the conditions vertically.
+
+
+
+[[SECTaclvariables]]
+ACL variables
+~~~~~~~~~~~~~
+cindex:[{ACL},variables]
+There are some special variables that can be set during ACL processing. They
+can be used to pass information between different ACLs, different invocations
+of the same ACL in the same SMTP connection, and between ACLs and the routers,
+transports, and filters that are used to deliver a message. There are two sets
+of these variables:
+
+- The values of $acl_c0$ to $acl_c9$ persist throughout an SMTP connection.
+They are never reset. Thus, a value that is set while receiving one message is
+still available when receiving the next message on the same SMTP connection.
+
+- The values of $acl_m0$ to $acl_m9$ persist only while a message is being
+received. They are reset afterwards. They are also reset by MAIL, RSET,
+EHLO, HELO, and after starting up a TLS session.
+
+When a message is accepted, the current values of all the ACL variables are
+preserved with the message and are subsequently made available at delivery
+time. The ACL variables are set by modifier called %set%. For example:
+
+ accept hosts = whatever
+ set acl_m4 = some value
+
+*Note*: a leading dollar sign is not used when naming a variable that is to
+be set. If you want to set a variable without taking any action, you can use a
+%warn% verb without any other modifiers or conditions.
+
+
+
+Condition and modifier processing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[{ACL},conditions; processing]
+cindex:[{ACL},modifiers; processing]
+An exclamation mark preceding a condition negates its result. For example,
+
+ deny domains = *.dom.example
+ !verify = recipient
+
+causes the ACL to return ``deny'' if the recipient domain ends in
+'dom.example' and the recipient address cannot be verified.
+
+The arguments of conditions and modifiers are expanded. A forced failure
+of an expansion causes a condition to be ignored, that is, it behaves as if the
+condition is true. Consider these two statements:
+
+....
+accept senders = ${lookup{$host_name}lsearch\
+ {/some/file}{$value}fail}
+accept senders = ${lookup{$host_name}lsearch\
+ {/some/file}{$value}{}}
+....
+
+Each attempts to look up a list of acceptable senders. If the lookup succeeds,
+the returned list is searched, but if the lookup fails the behaviour is
+different in the two cases. The %fail% in the first statement causes the
+condition to be ignored, leaving no further conditions. The %accept% verb
+therefore succeeds. The second statement, however, generates an empty list when
+the lookup fails. No sender can match an empty list, so the condition fails,
+and therefore the %accept% also fails.
+
+ACL modifiers appear mixed in with conditions in ACL statements. Some of them
+specify actions that are taken as the conditions for a statement are checked;
+others specify text for messages that are used when access is denied or a
+warning is generated. The %control% modifier affects the way an incoming
+message is handled.
+
+The positioning of the modifiers in an ACL statement important, because the
+processing of a verb ceases as soon as its outcome is known. Only those
+modifiers that have already been encountered will take effect. For example,
+consider this use of the %message% modifier:
+
+ require message = Can't verify sender
+ verify = sender
+ message = Can't verify recipient
+ verify = recipient
+ message = This message cannot be used
+
+If sender verification fails, Exim knows that the result of the statement is
+``deny'', so it goes no further. The first %message% modifier has been seen, so
+its text is used as the error message. If sender verification succeeds, but
+recipient verification fails, the second message is used. If recipient
+verification succeeds, the third message becomes ``current'', but is never used
+because there are no more conditions to cause failure.
+
+For the %deny% verb, on the other hand, it is always the last %message%
+modifier that is used, because all the conditions must be true for rejection to
+happen. Specifying more than one %message% modifier does not make sense, and
+the message can even be specified after all the conditions. For example:
+
+ deny hosts = ...
+ !senders = *@my.domain.example
+ message = Invalid sender from client host
+
+The ``deny'' result does not happen until the end of the statement is reached,
+by which time Exim has set up the message.
+
+
+
+[[SECTACLmodi]]
+ACL modifiers
+~~~~~~~~~~~~~
+cindex:[{ACL},modifiers; list of]
+The ACL modifiers are as follows:
+
+*control*~=~<'text'>::
+cindex:[%control%, ACL modifier]
+This modifier affects the subsequent processing of the SMTP connection or of an
+incoming message that is accepted. The effect of the first type of control
+lasts for the duration of the connection, whereas the effect of the second type
+lasts only until the current message has been received. The message-specific
+controls always apply to the whole message, not to individual recipients,
+even if the %control% modifier appears in a RCPT ACL.
++
+As there are now quite a few controls that can be applied, they are described
+separately in section <<SECTcontrols>>. The %control% modifier can be used in
+several different ways. For example:
++
+- It can be at the end of an %accept% statement:
++
+....
+ accept ...some conditions
+ control = queue_only
+....
++
+In this case, the control is applied when this statement yields ``accept'', in
+other words, when the conditions are all true.
+
+- It can be in the middle of an %accept% statement:
++
+....
+ accept ...some conditions...
+ control = queue_only
+ ...some more conditions...
+....
++
+If the first set of conditions are true, the control is applied, even if the
+statement does not accept because one of the second set of conditions is false.
+In this case, some subsequent statement must yield ``accept'' for the control to
+be relevant.
+
+- It can be used with %warn% to apply the control, leaving the
+decision about accepting or denying to a subsequent verb. For
+example:
++
+....
+ warn ...some conditions...
+ control = freeze
+ accept ...
+....
++
+This example of %warn% does not contain %message%, %log_message%, or
+%logwrite%, so it does not add anything to the message and does not write a log
+entry.
+
+- If you want to apply a control unconditionally, you can use it with a
+%require% verb. For example:
++
+....
+ require control = no_multiline_response
+....
+
+///
+End of bulleted list, continue with variable list
+///
+
+
+*delay*~=~<'time'>::
+cindex:[%delay%, ACL modifier]
+cindex:[%-bh% option]
+This modifier causes Exim to wait for the time interval before proceeding. The
+time is given in the usual Exim notation. This modifier may appear in any ACL.
+The delay happens as soon as the modifier is processed. However, when testing
+Exim using the %-bh% option, the delay is not actually imposed (an appropriate
+message is output instead).
++
+Like %control%, %delay% can be used with %accept% or
+%deny%, for example:
+
+ deny ...some conditions...
+ delay = 30s
++
+The delay happens if all the conditions are true, before the statement returns
+``deny''. Compare this with:
+
+ deny delay = 30s
+ ...some conditions...
++
+which waits for 30s before processing the conditions. The %delay% modifier can
+also be used with %warn% and together with %control%:
+
+ warn ...some conditions...
+ delay = 2m
+ control = freeze
+ accept ...
+
+*endpass*::
+cindex:[%endpass%, ACL modifier]
+This modifier, which has no argument, is recognized only in %accept%
+statements. It marks the boundary between the conditions whose failure causes
+control to pass to the next statement, and the conditions whose failure causes
+the ACL to return ``deny''. See the description of %accept% above.
+
+*log_message*~=~<'text'>::
+cindex:[%log_message%, ACL modifier]
+This modifier sets up a message that is used as part of the log message if the
+ACL denies access or a %warn% statement's conditions are true. For example:
+
+ require log_message = wrong cipher suite $tls_cipher
+ encrypted = DES-CBC3-SHA
++
+%log_message% adds to any underlying error message that may exist because of
+the condition failure. For example, while verifying a recipient address, a
+':fail:' redirection might have already set up a message. Although the message
+is usually defined before the conditions to which it applies, the expansion
+does not happen until Exim decides that access is to be denied. This means that
+any variables that are set by the condition are available for inclusion in the
+message. For example, the $dnslist_$<'xxx'> variables are set after a DNS
+black list lookup succeeds. If the expansion of %log_message% fails, or if the
+result is an empty string, the modifier is ignored.
++
+If you want to use a %warn% statement to log the result of an address
+verification, you can use $acl_verify_message$ to include the verification
+error message.
++
+If %log_message% is used with a %warn% statement, ``Warning:'' is added to the
+start of the logged message. If the same warning log message is requested more
+than once while receiving a single email message, only one copy is actually
+logged. If you want to log multiple copies, use %logwrite% instead of
+%log_message%. In the absence of %log_message% and %logwrite%, nothing is
+logged for a succesful %warn% statement.
++
+If %log_message% is not present and there is no underlying error message (for
+example, from the failure of address verification), but %message% is present,
+the %message% text is used for logging rejections. However, if any text for
+logging contains newlines, only the first line is logged. In the absence of
+both %log_message% and %message%, a default built-in message is used for
+logging rejections.
+
+*logwrite*~=~<'text'>::
+cindex:[%logwrite%, ACL modifier]
+cindex:[logging in ACL, immediate]
+This modifier writes a message to a log file as soon as it is encountered when
+processing an ACL. (Compare %log_message%, which, except in the case of
+%warn%, is used only if the ACL statement denies access.) The %logwrite%
+modifier can be used to log special incidents in ACLs. For example:
+
+ accept <some special conditions>
+ control = freeze
+ logwrite = froze message because ...
++
+By default, the message is written to the main log. However, it may begin
+with a colon, followed by a comma-separated list of log names, and then
+another colon, to specify exactly which logs are to be written. For
+example:
+
+ logwrite = :main,reject: text for main and reject logs
+ logwrite = :panic: text for panic log only
+
+*message*~=~<'text'>::
+cindex:[%message%, ACL modifier]
+This modifier sets up a text string that is expanded and used as an error
+message if the current statement causes the ACL to deny access. The expansion
+happens at the time Exim decides that access is to be denied, not at the time
+it processes %message%. If the expansion fails, or generates an empty string,
+the modifier is ignored. For ACLs that are triggered by SMTP commands, the
+message is returned as part of the SMTP error response.
++
+The %message% modifier is also used with the %warn% verb to specify one or more
+header lines to be added to an incoming message when all the conditions are
+true. See section <<SECTaddheadwarn>> for more details. If %message% is used
+with %warn% in an ACL that is not concerned with receiving a message, it has no
+effect.
++
+The text is literal; any quotes are taken as literals, but because the string
+is expanded, backslash escapes are processed anyway. If the message contains
+newlines, this gives rise to a multi-line SMTP response. Like %log_message%,
+the contents of %message% are not expanded until after a condition has failed.
++
+If %message% is used on a statement that verifies an address, the message
+specified overrides any message that is generated by the verification process.
+However, the original message is available in the variable
+$acl_verify_message$, so you can incorporate it into your message if you
+wish. In particular, if you want the text from %:fail:% items in ^redirect^
+routers to be passed back as part of the SMTP response, you should either not
+use a %message% modifier, or make use of $acl_verify_message$.
+
+*set*~<'acl_name'>~=~<'value'>::
+cindex:[%set%, ACL modifier]
+This modifier puts a value into one of the ACL variables (see section
+<<SECTaclvariables>>).
+
+
+
+[[SECTcontrols]]
+Use of the control modifier
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[%control%, ACL modifier]
+The %control% modifier supports the following settings:
+
+*control~=~caseful_local_part*::
+See below.
+
+*control~=~caselower_local_part*::
+cindex:[{ACL},case of local part in]
+cindex:[case of local parts]
+These two controls are permitted only in the ACL specified by %acl_smtp_rcpt%
+(that is, during RCPT processing). By default, the contents of $local_part$ are
+lower cased before ACL processing. If ``caseful_local_part'' is specified, any
+uppercase letters in the original local part are restored in $local_part$ for
+the rest of the ACL, or until a control that sets ``caselower_local_part'' is
+encountered.
++
+These controls affect only the current recipient. Moreover, they apply only to
+local part handling that takes place directly in the ACL (for example, as a key
+in lookups). If a test to verify the recipient is obeyed, the case-related
+handling of the local part during the verification is controlled by the router
+configuration (see the %caseful_local_part% generic router option).
++
+This facility could be used, for example, to add a spam score to local parts
+containing upper case letters. For example, using $acl_m4$ to accumulate the
+spam score:
++
+....
+warn control = caseful_local_part
+ set acl_m4 = ${eval:\
+ $acl_m4 + \
+ ${if match{$local_part}{[A-Z]}{1}{0}}\
+ }
+ control = caselower_local_part
+....
++
+Notice that we put back the lower cased version afterwards, assuming that
+is what is wanted for subsequent tests.
+
+*control~=~enforce_sync*::
+See below.
+
+*control~=~no_enforce_sync*::
+cindex:[SMTP,synchronization checking]
+cindex:[synchronization checking in SMTP]
+These controls make it possible to be selective about when SMTP synchronization
+is enforced. The global option %smtp_enforce_sync% specifies the initial
+state of the switch (it is true by default). See the description of this option
+in chapter <<CHAPmainconfig>> for details of SMTP synchronization checking.
++
+The effect of these two controls lasts for the remainder of the SMTP
+connection. They can appear in any ACL except the one for the non-SMTP
+messages. The most straightforward place to put them is in the ACL defined by
+%acl_smtp_connect%, which is run at the start of an incoming SMTP connection,
+before the first synchronization check. The expected use is to turn off the
+synchronization checks for badly-behaved hosts that you nevertheless need to
+work with.
+
+*control~=~fakereject/*<'message'>::
+cindex:[fake rejection]
+cindex:[rejection, fake]
+This control is permitted only for the MAIL, RCPT, and DATA ACLs, in other
+words, only when an SMTP message is being received. If Exim accepts the
+message, instead the final 250 response, a 550 rejection message is sent.
+However, Exim proceeds to deliver the message as normal. The control applies
+only to the current message, not to any subsequent ones that may be received in
+the same SMTP connection.
++
+The text for the 550 response is taken from the %control% modifier. If no
+message is supplied, the following is used:
+
+ 550-Your message has been rejected but is being
+ 550-kept for evaluation.
+ 550-If it was a legitimate message, it may still be
+ 550 delivered to the target recipient(s).
++
+This facilty should be used with extreme caution.
+
+*control~=~freeze*::
+cindex:[frozen messages,forcing in ACL]
+This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs, in
+other words, only when a message is being received. If the message is accepted,
+it is placed on Exim's queue and frozen. The control applies only to the
+current message, not to any subsequent ones that may be received in the same
+SMTP connection.
+
+*control~=~no_mbox_unspool*::
+This control is available when Exim is compiled with the content scanning
+extension. Content scanning may require a copy of the current message, or parts
+of it, to be written in ``mbox format'' to a spool file, for passing to a virus
+or spam scanner. Normally, such copies are deleted when they are no longer
+needed. If this control is set, the copies are not deleted. The control applies
+only to the current message, not to any subsequent ones that may be received in
+the same SMTP connection. It is provided for debugging purposes and is unlikely
+to be useful in production.
+
+*control~=~no_multiline_response*::
+cindex:[multiline responses, suppressing]
+This control is permitted for any ACL except the one for non-SMTP messages.
+It seems that there are broken clients in use that cannot handle multiline
+SMTP responses, despite the fact that RFC 821 defined them over 20 years ago.
++
+If this control is set, multiline SMTP responses from ACL rejections are
+suppressed. One way of doing this would have been to put out these responses as
+one long line. However, RFC 2821 specifies a maximum of 512 bytes per response
+(``use multiline responses for more'' it says -- ha!), and some of the responses
+might get close to that. So this facility, which is after all only a sop to
+broken clients, is implemented by doing two very easy things:
++
+--
+. Extra information that is normally output as part of a rejection caused by
+sender verification failure is omitted. Only the final line (typically ``sender
+verification failed'') is sent.
+
+. If a %message% modifier supplies a multiline response, only the first
+line is output.
+--
++
+The setting of the switch can, of course, be made conditional on the
+calling host. Its effect lasts until the end of the SMTP connection.
+
+*control~=~queue_only*::
+cindex:[%queue_only%]
+cindex:[queueing incoming messages]
+This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs, in
+other words, only when a message is being received. If the message is accepted,
+it is placed on Exim's queue and left there for delivery by a subsequent queue
+runner. No immediate delivery process is started. In other words, it has the
+effect as the %queue_only% global option. However, the control applies only to
+the current message, not to any subsequent ones that may be received in the
+same SMTP connection.
+
+*control~=~submission/*<'options'>::
+cindex:[message,submission]
+cindex:[submission mode]
+This control is permitted only for the MAIL, RCPT, and start of data ACLs (the
+latter is the one defined by %acl_smtp_predata%). Setting it tells Exim that
+the current message is a submission from a local MUA. In this case, Exim
+operates in ``submission mode'', and applies certain fixups to the message if
+necessary. For example, it add a 'Date:' header line if one is not present.
+This control is not permitted in the %acl_smtp_data% ACL, because that is too
+late (the message has already been created).
++
+Chapter <<CHAPmsgproc>> describes the processing that Exim applies to messages.
+Section <<SECTsubmodnon>> covers the processing that happens in submission mode;
+the available options for this control are described there. The control applies
+only to the current message, not to any subsequent ones that may be received in
+the same SMTP connection.
+
+
+
+[[SECTaddheadwarn]]
+Adding header lines with the warn verb
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[header lines,adding in an ACL]
+cindex:[header lines,position of added lines]
+cindex:[%warn%, ACL verb]
+cindex:[%message%, ACL modifier]
+The %message% modifier can be used on a %warn% statement to add an extra header
+line to an incoming message, as in this example:
+
+....
+warn message = X-blacklisted-at: $dnslist_domain
+ dnslists = sbl.spamhaus.org : \
+ dialup.mail-abuse.org
+....
+
+If an identical header line is requested several times (provoked, for example,
+by multiple RCPT commands), only one copy is actually added to the message.
+If the text of the %message% modifier contains one or more newlines that are
+not followed by a space or a tab, it is assumed to contain multiple header
+lines. Each one is checked for valid syntax; `X-ACL-Warn:` is added to the
+front of any line that is not a valid header line.
+
+By default, new lines are added at the end of the existing header lines.
+However, you can specify that any particular header line should be added right
+at the start (before all the 'Received:' lines), immediately after the first
+block of 'Received:' lines, or immediately before any line that is not a
+'Received:' or 'Resent-something:' header.
+
+This is done by specifying ``:at_start:'', ``:after_received:'', or
+``:at_start_rfc:'' (or, for completeness, ``:at_end:'') before the text of the
+header line, respectively. (Header text cannot start with a colon, as there has
+to be a header name first.) For example:
+
+ warn message = :after_received:X-My-Header: something or other...
+
+
+If more than one header is supplied in a single warn statement, each one is
+treated independently and can therefore be placed differently. If you add
+more than one line at the start, or after the Received: block, they will
+end up in reverse order.
+
+*Warning*: This facility currently applies only to header lines that are
+added in an ACL. It does NOT work for header lines that are added in a
+system filter or in a router or transport.
+
+cindex:[header lines,added; visibility of]
+Header lines that are added by an ACL at MAIL or RCPT time are not
+visible in string expansions in ACLs for subsequent RCPT commands or in the
+%acl_smtp_predata% ACL. However, they are visible in string expansions in the
+ACL that is run after DATA is complete (the %acl_smtp_data% ACL). This is
+also true for header lines that are added in the %acl_smtp_predata% ACL.
+If a message is rejected after DATA, all added header lines are included in
+the entry that is written to the reject log.
+
+If you want to preserve data between MAIL, RCPT, and the
+%acl_smtp_predata% ACLs, you can use ACL variables, as described in section
+<<SECTaclvariables>>.
+
+
+
+
+
+[[SECTaclconditions]]
+ACL conditions
+~~~~~~~~~~~~~~
+cindex:[{ACL},conditions; list of]
+Some of conditions listed in this section are available only when Exim is
+compiled with the content-scanning extension. They are included here briefly
+for completeness. More detailed descriptions can be found in the discussion on
+content scanning in chapter <<CHAPexiscan>>.
+
+Not all conditions are relevant in all circumstances. For example, testing
+senders and recipients does not make sense in an ACL that is being run as the
+result of the arrival of an ETRN command, and checks on message headers can be
+done only in the ACLs specified by %acl_smtp_data% and %acl_not_smtp%. You can
+use the same condition (with different parameters) more than once in the same
+ACL statement. This provides a way of specifying an ``and'' conjunction. The
+conditions are as follows:
+
+
+*acl~=~*<'name~of~acl~or~ACL~string~or~file~name~'>::
+cindex:[{ACL},nested]
+cindex:[{ACL},indirect]
+cindex:[%acl%, ACL condition]
+The possible values of the argument are the same as for the %acl_smtp_%##'xxx'
+options. The named or inline ACL is run. If it returns ``accept'' the condition
+is true; if it returns ``deny'' the condition is false. If it returns
+``defer'', the current ACL returns ``defer'' unless the condition is on a
+%warn% verb. In that case, a ``defer'' return makes the condition false. This
+means that further processing of the %warn% verb ceases, but processing of the
+ACL continues.
++
+If the nested %acl% returns ``drop'' and the outer condition denies access, the
+connection is dropped. If it returns ``discard'', the verb must be %accept% or
+%discard%, and the action is taken immediately -- no further conditions are
+tested.
++
+ACLs may be nested up to 20 deep; the limit exists purely to catch runaway
+loops. This condition allows you to use different ACLs in different
+circumstances. For example, different ACLs can be used to handle RCPT commands
+for different local users or different local domains.
+
+*authenticated~=~*<'string~list'>::
+cindex:[%authenticated%, ACL condition]
+cindex:[authentication,ACL checking]
+cindex:[{ACL},testing for authentication]
+If the SMTP connection is not authenticated, the condition is false. Otherwise,
+the name of the authenticator is tested against the list. To test for
+authentication by any authenticator, you can set
+
+ authenticated = *
+
+*condition~=~*<'string'>::
+cindex:[%condition%, ACL condition]
+cindex:[customizing,ACL condition]
+cindex:[{ACL},customized test]
+cindex:[{ACL},testing; customized]
+This feature allows you to make up custom conditions. If the result of
+expanding the string is an empty string, the number zero, or one of the strings
+``no'' or ``false'', the condition is false. If the result is any non-zero
+number, or one of the strings ``yes'' or ``true'', the condition is true. For
+any other values, some error is assumed to have occured, and the ACL returns
+``defer''.
+
+*decode~=~*<'location'>::
+cindex:[%decode%, ACL condition]
+This condition is available only when Exim is compiled with the
+content-scanning extension, and it is allowed only the the ACL defined by
+%acl_smtp_mime%. It causes the current MIME part to be decoded into a file. For
+details, see chapter <<CHAPexiscan>>.
+
+*dnslists~=~*<'list~of~domain~names~and~other~data'>::
+cindex:[%dnslists%, ACL condition]
+cindex:[DNS list,in ACL]
+cindex:[black list (DNS)]
+cindex:[{ACL},testing a DNS list]
+This condition checks for entries in DNS black lists. These are also known as
+``RBL lists'', after the original Realtime Blackhole List, but note that the
+use of the lists at 'mail-abuse.org' now carries a charge. There are too many
+different variants of this condition to describe briefly here. See sections
+<<SECTmorednslists>>--<<SECTmorednslistslast>> for details.
+
+*domains~=~*<'domain~list'>::
+cindex:[%domains%, ACL condition]
+cindex:[domain,ACL checking]
+cindex:[{ACL},testing a recipient domain]
+This condition is relevant only after a RCPT command. It checks that the domain
+of the recipient address is in the domain list. If percent-hack processing is
+enabled, it is done before this test is done. If the check succeeds with a
+lookup, the result of the lookup is placed in $domain_data$ until the next
+%domains% test.
+
+*encrypted~=~*<'string~list'>::
+cindex:[%encrypted%, ACL condition]
+cindex:[encryption,checking in an ACL]
+cindex:[{ACL},testing for encryption]
+If the SMTP connection is not encrypted, the condition is false. Otherwise, the
+name of the cipher suite in use is tested against the list. To test for
+encryption without testing for any specific cipher suite(s), set
+
+ encrypted = *
+
+*hosts~=~*<'~host~list'>::
+cindex:[%hosts%, ACL condition]
+cindex:[host,ACL checking]
+cindex:[{ACL},testing the client host]
+This condition tests that the calling host matches the host list. If you have
+name lookups or wildcarded host names and IP addresses in the same host list,
+you should normally put the IP addresses first. For example, you could have:
+
+ accept hosts = 10.9.8.7 : dbm;/etc/friendly/hosts
++
+The reason for this lies in the left-to-right way that Exim processes lists.
+It can test IP addresses without doing any DNS lookups, but when it reaches an
+item that requires a host name, it fails if it cannot find a host name to
+compare with the pattern. If the above list is given in the opposite order, the
+%accept% statement fails for a host whose name cannot be found, even if its
+IP address is 10.9.8.7.
++
+If you really do want to do the name check first, and still recognize the IP
+address even if the name lookup fails, you can rewrite the ACL like this:
+
+ accept hosts = dbm;/etc/friendly/hosts
+ accept hosts = 10.9.8.7
++
+The default action on failing to find the host name is to assume that the host
+is not in the list, so the first %accept% statement fails. The second statement
+can then check the IP address.
++
+If a %hosts% condition is satisfied by means of a lookup, the result
+of the lookup is made available in the $host_data$ variable. This
+allows you, for example, to set up a statement like this:
+
+ deny hosts = net-lsearch;/some/file
+ message = $host_data
++
+which gives a custom error message for each denied host.
+
+*local_parts~=~*<'local~part~list'>::
+cindex:[%local_parts%, ACL condition]
+cindex:[local part,ACL checking]
+cindex:[{ACL},testing a local part]
+This condition is relevant only after a RCPT command. It checks that the local
+part of the recipient address is in the list. If percent-hack processing is
+enabled, it is done before this test. If the check succeeds with a lookup, the
+result of the lookup is placed in $local_part_data$ until the next
+%local_parts% test.
+
+*malware~=~*<'option'>::
+cindex:[%malware%, ACL condition]
+cindex:[{ACL},virus scanning]
+cindex:[{ACL},scanning for viruses]
+This condition is available only when Exim is compiled with the
+content-scanning extension. It causes the incoming message to be scanned for
+viruses. For details, see chapter <<CHAPexiscan>>.
+
+*mime_regex~=~*<'list~of~regular~expressions'>::
+cindex:[%mime_regex%, ACL condition]
+cindex:[{ACL},testing by regex matching]
+This condition is available only when Exim is compiled with the
+content-scanning extension, and it is allowed only the the ACL defined by
+%acl_smtp_mime%. It causes the current MIME part to be scanned for a match with
+any of the regular expressions. For details, see chapter <<CHAPexiscan>>.
+
+*recipients~=~*<'address~list'>::
+cindex:[%recipients%, ACL condition]
+cindex:[recipient,ACL checking]
+cindex:[{ACL},testing a recipient]
+This condition is relevant only after a RCPT command. It checks the entire
+recipient address against a list of recipients.
+
+*regex~=~*<'list~of~regular~expressions'>::
+cindex:[%regex%, ACL condition]
+cindex:[{ACL},testing by regex matching]
+This condition is available only when Exim is compiled with the
+content-scanning extension. It causes the incoming message to be scanned for a
+match with any of the regular expressions. For details, see chapter
+<<CHAPexiscan>>.
+
+*sender_domains~=~*<'domain~list'>::
+cindex:[%sender_domains%, ACL condition]
+cindex:[sender,ACL checking]
+cindex:[{ACL},testing a sender domain]
+This condition tests the domain of the sender of the message against the given
+domain list. *Note*: the domain of the sender address is in
+$sender_address_domain$. It is 'not' put in $domain$ during the testing of this
+condition. This is an exception to the general rule for testing domain lists.
+It is done this way so that, if this condition is used in an ACL for a RCPT
+command, the recipient's domain (which is in $domain$) can be used to influence
+the sender checking.
+
+*senders~=~*<'address~list'>::
+cindex:[%senders%, ACL condition]
+cindex:[sender,ACL checking]
+cindex:[{ACL},testing a sender]
+This condition tests the sender of the message against the given list. To test
+for a bounce message, which has an empty sender, set
+
+ senders = :
+
+*spam~=~*<'username'>::
+cindex:[%spam%, ACL condition]
+cindex:[{ACL},scanning for spam]
+This condition is available only when Exim is compiled with the
+content-scanning extension. It causes the incoming message to be scanned by
+SpamAssassin. For details, see chapter <<CHAPexiscan>>.
+
+*verify~=~certificate*::
+cindex:[%verify%, ACL condition]
+cindex:[TLS,client certificate verification]
+cindex:[certificate,verification of client]
+cindex:[{ACL},certificate verification]
+cindex:[{ACL},testing a TLS certificate]
+This condition is true in an SMTP session if the session is encrypted, and a
+certificate was received from the client, and the certificate was verified. The
+server requests a certificate only if the client matches %tls_verify_hosts% or
+%tls_try_verify_hosts% (see chapter <<CHAPTLS>>).
+
+*verify~=~header_sender/*<'options'>::
+cindex:[%verify%, ACL condition]
+cindex:[{ACL},verifying sender in the header]
+cindex:[header lines,verifying the sender in]
+cindex:[sender,verifying in header]
+cindex:[verifying,sender in header]
+This condition is relevant only in an ACL that is run after a message has been
+received, that is, in an ACL specified by %acl_smtp_data% or %acl_not_smtp%. It
+checks that there is a verifiable address in at least one of the 'Sender:',
+'Reply-To:', or 'From:' header lines. Such an address is loosely thought of as
+a ``sender'' address (hence the name of the test). However, an address that
+appears in one of these headers need not be an address that accepts bounce
+messages; only sender addresses in envelopes are required to accept bounces.
+Therefore, if you use the callout option on this check, you might want to
+arrange for a non-empty address in the MAIL command.
++
+Details of address verification and the options are given later, starting at
+section <<SECTaddressverification>> (callouts are described in section
+<<SECTcallver>>). You can combine this condition with the %senders% condition to
+restrict it to bounce messages only:
+
+ deny senders = :
+ message = A valid sender header is required for bounces
+ !verify = header_sender
+
+*verify~=~header_syntax*::
+cindex:[%verify%, ACL condition]
+cindex:[{ACL},verifying header syntax]
+cindex:[header lines,verifying syntax]
+cindex:[verifying,header syntax]
+This condition is relevant only in an ACL that is run after a message has been
+received, that is, in an ACL specified by %acl_smtp_data% or %acl_not_smtp%. It
+checks the syntax of all header lines that can contain lists of addresses
+('Sender:', 'From:', 'Reply-To:', 'To:', 'Cc:', and 'Bcc:'). Unqualified
+addresses (local parts without domains) are permitted only in locally generated
+messages and from hosts that match %sender_unqualified_hosts% or
+%recipient_unqualified_hosts%, as appropriate.
++
+Note that this condition is a syntax check only. However, a common spamming
+ploy used to be to send syntactically invalid headers such as
+
+ To: @
++
+and this condition can be used to reject such messages, though they are not as
+common as they used to be.
+
+*verify~=~helo*::
+cindex:[%verify%, ACL condition]
+cindex:[{ACL},verifying HELO/EHLO]
+cindex:[HELO,verifying]
+cindex:[EHLO,verifying]
+cindex:[verifying,EHLO]
+cindex:[verifying,HELO]
+This condition is true if a HELO or EHLO command has been received from the
+client host, and its contents have been verified. Verification of these
+commands does not happen by default. See the description of the
+%helo_verify_hosts% and %helo_try_verify_hosts% options for details of how to
+request it.
+
+*verify~=~recipient/*<'options'>::
+cindex:[%verify%, ACL condition]
+cindex:[{ACL},verifying recipient]
+cindex:[recipient,verifying]
+cindex:[verifying,recipient]
+This condition is relevant only after a RCPT command. It verifies the current
+recipient. Details of address verification are given later, starting at section
+<<SECTaddressverification>>. After a recipient has been verified, the value of
+$address_data$ is the last value that was set while routing the address. This
+applies even if the verification fails. When an address that is being verified
+is redirected to a single address, verification continues with the new address,
+and in that case, the subsequent value of $address_data$ is the value for the
+child address.
+
+*verify~=~reverse_host_lookup*::
+cindex:[%verify%, ACL condition]
+cindex:[{ACL},verifying host reverse lookup]
+cindex:[host,verifying reverse lookup]
+This condition ensures that a verified host name has been looked up from the IP
+address of the client host. (This may have happened already if the host name
+was needed for checking a host list, or if the host matched %host_lookup%.)
+Verification ensures that the host name obtained from a reverse DNS lookup, or
+one of its aliases, does, when it is itself looked up in the DNS, yield the
+original IP address.
++
+If this condition is used for a locally generated message (that is, when there
+is no client host involved), it always succeeds.
+
+*verify~=~sender/*<'options'>::
+cindex:[%verify%, ACL condition]
+cindex:[{ACL},verifying sender]
+cindex:[sender,verifying]
+cindex:[verifying,sender]
+This condition is relevant only after a MAIL or RCPT command, or after a
+message has been received (the %acl_smtp_data% or %acl_not_smtp% ACLs). If the
+message's sender is empty (that is, this is a bounce message), the condition is
+true. Otherwise, the sender address is verified.
++
+If there is data in the $address_data$ variable at the end of routing, its
+value is placed in $sender_address_data$ at the end of verification. This
+value can be used in subsequent conditions and modifiers in the same ACL
+statement. It does not persist after the end of the current statement. If you
+want to preserve the value for longer, you can save it in an ACL variable.
++
+Details of verification are given later, starting at section
+<<SECTaddressverification>>. Exim caches the result of sender verification, to
+avoid doing it more than once per message.
+
+*verify~=~sender=*<'address'>*/*<'options'>::
+cindex:[%verify%, ACL condition]
+This is a variation of the previous option, in which a modified address is
+verified as a sender.
+
+
+
+[[SECTmorednslists]]
+Using DNS lists
+~~~~~~~~~~~~~~~
+cindex:[DNS list,in ACL]
+cindex:[black list (DNS)]
+cindex:[{ACL},testing a DNS list]
+In its simplest form, the %dnslists% condition tests whether the calling host
+is on at least one of a number of DNS lists by looking up the inverted IP
+address in one or more DNS domains. For example, if the calling host's IP
+address is 192.168.62.43, and the ACL statement is
+
+....
+deny dnslists = blackholes.mail-abuse.org : \
+ dialups.mail-abuse.org
+....
+
+the following records are looked up:
+
+ 43.62.168.192.blackholes.mail-abuse.org
+ 43.62.168.192.dialups.mail-abuse.org
+
+As soon as Exim finds an existing DNS record, processing of the list stops.
+Thus, multiple entries on the list provide an ``or'' conjunction. If you want to
+test that a host is on more than one list (an ``and'' conjunction), you can use
+two separate conditions:
+
+ deny dnslists = blackholes.mail-abuse.org
+ dnslists = dialups.mail-abuse.org
+
+If a DNS lookup times out or otherwise fails to give a decisive answer, Exim
+behaves as if the host does not match the list item, that is, as if the DNS
+record does not exist. If there are further items in the DNS list, they are
+processed.
+
+This is usually the required action when %dnslists% is used with %deny% (which
+is the most common usage), because it prevents a DNS failure from blocking
+mail. However, you can change this behaviour by putting one of the following
+special items in the list:
+
+cindex:[`+include_unknown`]
+cindex:[`+exclude_unknown`]
+cindex:[`+defer_unknown`]
+&&&
+`+include_unknown ` behave as if the item is on the list
+`+exclude_unknown ` behave as if the item is not on the list (default)
+`+defer_unknown ` give a temporary error
+&&&
+Each of these applies to any subsequent items on the list. For example:
+
+ deny dnslists = +defer_unknown : foo.bar.example
+
+
+Testing the list of domains stops as soon as a match is found. If you want to
+warn for one list and block for another, you can use two different statements:
+
+ deny dnslists = blackholes.mail-abuse.org
+ warn message = X-Warn: sending host is on dialups list
+ dnslists = dialups.mail-abuse.org
+
+
+DNS list lookups are cached by Exim for the duration of the SMTP session,
+so a lookup based on the IP address is done at most once for any incoming
+connection. Exim does not share information between multiple incoming
+connections (but your local name server cache should be active).
+
+
+
+Specifying the IP address for a DNS list lookup
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DNS list,keyed by explicit IP address]
+By default, the IP address that is used in a DNS list lookup is the IP address
+of the calling host. However, you can specify another IP address by listing it
+after the domain name, introduced by a slash. For example:
+
+ deny dnslists = black.list.tls/192.168.1.2
+
+This feature is not very helpful with explicit IP addresses; it is intended for
+use with IP addresses that are looked up, for example, the IP addresses of the
+MX hosts or nameservers of an email sender address. For an example, see section
+<<SECTmulkeyfor>> below.
+
+
+
+
+DNS lists keyed on domain names
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DNS list,keyed by domain name]
+There are some lists that are keyed on domain names rather than inverted IP
+addresses (see for example the 'domain based zones' link at
+*http://www.rfc-ignorant.org/[]*). No reversing of components is used with
+these lists. You can change the name that is looked up in a DNS list by listing
+it after the domain name, introduced by a slash. For example,
+
+ deny message = Sender's domain is listed at $dnslist_domain
+ dnslists = dsn.rfc-ignorant.org/$sender_address_domain
+
+This particular example is useful only in ACLs that are obeyed after the
+RCPT or DATA commands, when a sender address is available. If (for
+example) the message's sender is 'user@tld.example' the name that is looked
+up by this example is
+
+ tld.example.dsn.rfc-ignorant.org
+
+A single %dnslists% condition can contain entries for both names and IP
+addresses. For example:
+
+....
+deny dnslists = sbl.spamhaus.org : \
+ dsn.rfc-ignorant.org/$sender_address_domain
+....
+
+The first item checks the sending host's IP address; the second checks a domain
+name. The whole condition is true if either of the DNS lookups succeeds.
+
+
+
+
+[[SECTmulkeyfor]]
+Multiple explicit keys for a DNS list
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DNS list,multiple keys for]
+The syntax described above for looking up explicitly-defined values (either
+names or IP addresses) in a DNS blacklist is a simplification. After the domain
+name for the DNS list, what follows the slash can in fact be a list of items.
+As with all lists in Exim, the default separator is a colon. However, because
+this is a sublist within the list of DNS blacklist domains, it is necessary
+either to double the separators like this:
+
+ dnslists = black.list.tld/name.1::name.2
+
+or to change the separator character, like this:
+
+ dnslists = black.list.tld/<;name.1;name.2
+
+If an item in the list is an IP address, it is inverted before the DNS
+blacklist domain is appended. If it is not an IP address, no inversion
+occurs. Consider this condition:
+
+ dnslists = black.list.tld/<;192.168.1.2;a.domain
+
+The DNS lookups that occur are:
+
+ 2.1.168.192.black.list.tld
+ a.domain.black.list.tld
+
+Once a DNS record has been found (that matches a specific IP return
+address, if specified -- see section <<SECTaddmatcon>>), no further lookups are
+done. If there is a temporary DNS error, the rest of the sublist of domains or
+IP addresses is tried. A temporary error for the whole dnslists item occurs
+only if no other DNS lookup in this sublist succeeds. In other words, a
+successful lookup for any of the items in the sublist overrides a temporary
+error for a previous item.
+
+The ability to supply a list of items after the slash is in some sense just a
+syntactic convenience. These two examples have the same effect:
+
+ dnslists = black.list.tld/a.domain : black.list.tld/b.domain
+ dnslists = black.list.tld/a.domain::b.domain
+
+However, when the data for the list is obtained from a lookup, the second form
+is usually much more convenient. Consider this example:
+
+....
+deny message = The mail servers for the domain \
+ $sender_address_domain \
+ are listed at $dnslist_domain ($dnslist_value); \
+ see $dnslist_text.
+ dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\
+ ${lookup dnsdb {>|mxh=\
+ $sender_address_domain} }} }
+....
+
+Note the use of `>|` in the dnsdb lookup to specify the separator for
+multiple DNS records. The inner dnsdb lookup produces a list of MX hosts
+and the outer dnsdb lookup finds the IP addresses for these hosts. The result
+of expanding the condition might be something like this:
+
+ dnslists = sbl.spahmaus.org/<|192.168.2.3|192.168.5.6|...
+
+Thus, this example checks whether or not the IP addresses of the sender
+domain's mail servers are on the Spamhaus black list.
+
+
+
+
+
+Data returned by DNS lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DNS list,data returned from]
+DNS lists are constructed using address records in the DNS. The original RBL
+just used the address 127.0.0.1 on the right hand side of each record, but the
+RBL+ list and some other lists use a number of values with different meanings.
+The values used on the RBL+ list are:
+
+&&&
+127.1.0.1 RBL
+127.1.0.2 DUL
+127.1.0.3 DUL and RBL
+127.1.0.4 RSS
+127.1.0.5 RSS and RBL
+127.1.0.6 RSS and DUL
+127.1.0.7 RSS and DUL and RBL
+&&&
+
+Some DNS lists may return more than one address record.
+
+
+Variables set from DNS lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DNS list,variables set from]
+When an entry is found in a DNS list, the variable $dnslist_domain$
+contains the name of the domain that matched, $dnslist_value$ contains the
+data from the entry, and $dnslist_text$ contains the contents of any
+associated TXT record. If more than one address record is returned by the DNS
+lookup, all the IP addresses are included in $dnslist_value$, separated by
+commas and spaces.
+
+You can use these variables in %message% or %log_message% modifiers --
+although these appear before the condition in the ACL, they are not expanded
+until after it has failed. For example:
+
+....
+deny hosts = !+local_networks
+ message = $sender_host_address is listed \
+ at $dnslist_domain
+ dnslists = rbl-plus.mail-abuse.example
+....
+
+
+
+
+[[SECTaddmatcon]]
+Additional matching conditions for DNS lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DNS list,matching specific returned data]
+You can add an equals sign and an IP address after a %dnslists% domain name in
+order to restrict its action to DNS records with a matching right hand side.
+For example,
+
+ deny dnslists = rblplus.mail-abuse.org=127.0.0.2
+
+rejects only those hosts that yield 127.0.0.2. Without this additional data,
+any address record is considered to be a match. If more than one address record
+is found on the list, they are all checked for a matching right-hand side.
+
+More than one IP address may be given for checking, using a comma as a
+separator. These are alternatives -- if any one of them matches, the %dnslists%
+condition is true. For example:
+
+ deny dnslists = a.b.c=127.0.0.2,127.0.0.3
+
+
+If you want to specify a constraining address list and also specify names or IP
+addresses to be looked up, the constraining address list must be specified
+first. For example:
+
+....
+deny dnslists = dsn.rfc-ignorant.org\
+ =127.0.0.2/$sender_address_domain
+....
+
+
+If the character ``&'' is used instead of ``='', the comparison for each listed
+IP address is done by a bitwise ``and'' instead of by an equality test. In
+other words, the listed addresses are used as bit masks. The comparison is
+true if all the bits in the mask are present in the address that is being
+tested. For example:
+
+ dnslists = a.b.c&0.0.0.3
+
+matches if the address is 'x.x.x.'3, 'x.x.x.'7, 'x.x.x.'11, etc. If you
+want to test whether one bit or another bit is present (as opposed to both
+being present), you must use multiple values. For example:
+
+ dnslists = a.b.c&0.0.0.1,0.0.0.2
+
+matches if the final component of the address is an odd number or two times
+an odd number.
+
+
+
+Negated DNS matching conditions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+You can supply a negative list of IP addresses as part of a %dnslists%
+condition. Whereas
+
+ deny dnslists = a.b.c=127.0.0.2,127.0.0.3
+
+means ``deny if the host is in the black list at the domain 'a.b.c' and the IP
+address yielded by the list is either 127.0.0.2 or 127.0.0.3'',
+
+ deny dnslists = a.b.c!=127.0.0.2,127.0.0.3
+
+means ``deny if the host is in the black list at the domain 'a.b.c' and the IP
+address yielded by the list is not 127.0.0.2 and not 127.0.0.3''. In other
+words, the result of the test is inverted if an exclamation mark appears before
+the ``='' (or the ``&'') sign.
+
+*Note*: this kind of negation is not the same as negation in a domain,
+host, or address list (which is why the syntax is different).
+
+If you are using just one list, the negation syntax does not gain you much. The
+previous example is precisely equivalent to
+
+ deny dnslists = a.b.c
+ !dnslists = a.b.c=127.0.0.2,127.0.0.3
+
+However, if you are using multiple lists, the negation syntax is clearer.
+Consider this example:
+
+....
+deny dnslists = sbl.spamhaus.org : \
+ list.dsbl.org : \
+ dnsbl.njabl.org!=127.0.0.3 : \
+ relays.ordb.org
+....
+
+Using only positive lists, this would have to be:
+
+....
+deny dnslists = sbl.spamhaus.org : \
+ list.dsbl.org
+deny dnslists = dnsbl.njabl.org
+ !dnslists = dnsbl.njabl.org=127.0.0.3
+deny dnslists = relays.ordb.org
+....
+
+which is less clear, and harder to maintain.
+
+
+
+
+[[SECTmorednslistslast]]
+DNS lists and IPv6
+~~~~~~~~~~~~~~~~~~
+cindex:[IPv6,DNS black lists]
+cindex:[DNS list,IPv6 usage]
+If Exim is asked to do a dnslist lookup for an IPv6 address, it inverts it
+nibble by nibble. For example, if the calling host's IP address is
+3ffe:ffff:836f:0a00:000a:0800:200a:c031, Exim might look up
+
+ 1.3.0.c.a.0.0.2.0.0.8.0.a.0.0.0.0.0.a.0.f.6.3.8.
+ f.f.f.f.e.f.f.3.blackholes.mail-abuse.org
+
+(split over two lines here to fit on the page). Unfortunately, some of the DNS
+lists contain wildcard records, intended for IPv4, that interact badly with
+IPv6. For example, the DNS entry
+
+ *.3.some.list.example. A 127.0.0.1
+
+is probably intended to put the entire 3.0.0.0/8 IPv4 network on the list.
+Unfortunately, it also matches the entire 3::/4 IPv6 network.
+
+You can exclude IPv6 addresses from DNS lookups by making use of a suitable
+%condition% condition, as in this example:
+
+ deny condition = ${if isip4{$sender_host_address}}
+ dnslists = some.list.example
+
+
+
+
+[[SECTaddressverification]]
+Address verification
+~~~~~~~~~~~~~~~~~~~~
+cindex:[verifying address, options for]
+cindex:[policy control,address verification]
+Several of the %verify% conditions described in section <<SECTaclconditions>>
+cause addresses to be verified. These conditions can be followed by options
+that modify the verification process. The options are separated from the
+keyword and from each other by slashes, and some of them contain parameters.
+For example:
+
+ verify = sender/callout
+ verify = recipient/defer_ok/callout=10s,defer_ok
+
+The first stage of address verification, which always happens, is to run the
+address through the routers, in ``verify mode''. Routers can detect the
+difference between verification and routing for delivery, and their actions can
+be varied by a number of generic options such as %verify% and %verify_only%
+(see chapter <<CHAProutergeneric>>). If routing fails, verification fails.
+The available options are as follows:
+
+- If the %callout% option is specified, successful routing to one or more remote
+hosts is followed by a ``callout'' to those hosts as an additional check.
+Callouts and their sub-options are discussed in the next section.
+
+- If there is a defer error while doing verification routing, the ACL
+normally returns ``defer''. However, if you include %defer_ok% in the options,
+the condition is forced to be true instead. Note that this is a main
+verification option as well as a suboption for callouts.
+
+- The %no_details% option is covered in section <<SECTsenaddver>>, which discusses
+the reporting of sender address verification failures.
+
+cindex:[verifying address, differentiating failures]
+After an address verification failure, $sender_verify_failure$ or
+$recipient_verify_failure$ (as appropriate) contains one of the following
+words:
+
+- %qualify%: The address was unqualified (no domain), and the message
+was neither local nor came from an exempted host.
+
+- %route%: Routing failed.
+
+- %mail%: Routing succeeded, and a callout was attempted; rejection
+occurred at or before the MAIL command (that is, on initial
+connection, HELO, or MAIL).
+
+- %recipient%: The RCPT command in a callout was rejected.
+
+- %postmaster%: The postmaster check in a callout was rejected.
+
+
+The main use of these variables is expected to be to distinguish between
+rejections of MAIL and rejections of RCPT in callouts.
+
+
+
+
+[[SECTcallver]]
+Callout verification
+~~~~~~~~~~~~~~~~~~~~
+cindex:[verifying address, by callout]
+cindex:[callout,verification]
+cindex:[SMTP,callout verification]
+For non-local addresses, routing verifies the domain, but is unable to do any
+checking of the local part. There are situations where some means of verifying
+the local part is desirable. One way this can be done is to make an SMTP
+'callback' to the sending host (for a sender address) or a 'callforward' to
+a subsequent host (for a recipient address), to see if the host accepts the
+address. We use the term 'callout' to cover both cases. This facility should
+be used with care, because it can add a lot of resource usage to the cost of
+verifying an address. However, Exim does cache the results of callouts, which
+helps to reduce the cost. Details of caching are in the next section.
+
+Recipient callouts are usually used only between hosts that are controlled by
+the same administration. For example, a corporate gateway host could use
+callouts to check for valid recipients on an internal mailserver.
+A successful callout does not guarantee that a real delivery to the address
+would succeed; on the other hand, a failing callout does guarantee that
+a delivery would fail.
+
+If the %callout% option is present on a condition that verifies an address, a
+second stage of verification occurs if the address is successfully routed to
+one or more remote hosts. The usual case is routing by a ^dnslookup^ or a
+^manualroute^ router, where the router specifies the hosts. However, if a
+router that does not set up hosts routes to an ^smtp^ transport with a
+%hosts% setting, the transport's hosts are used. If an ^smtp^ transport has
+%hosts_override% set, its hosts are always used, whether or not the router
+supplies a host list.
+
+The port that is used is taken from the transport, if it is specified and is a
+remote transport. (For routers that do verification only, no transport need be
+specified.) Otherwise, the default SMTP port is used. If a remote transport
+specifies an outgoing interface, this is used; otherwise the interface is not
+specified.
+
+For a sender callout check, Exim makes SMTP connections to the remote hosts, to
+test whether a bounce message could be delivered to the sender address. The
+following SMTP commands are sent:
+
+&&&
+`HELO `<'smtp active host name'>
+`MAIL FROM:<>`
+`RCPT TO:`<'the address to be tested'>
+`QUIT`
+&&&
+
+LHLO is used instead of HELO if the transport's %protocol% option is
+set to ``lmtp''.
+
+A recipient callout check is similar. By default, it also uses an empty address
+for the sender. This default is chosen because most hosts do not make use of
+the sender address when verifying a recipient. Using the same address means
+that a single cache entry can be used for each recipient. Some sites, however,
+do make use of the sender address when verifying. These are catered for by the
+%use_sender% and %use_postmaster% options, described in the next section.
+
+If the response to the RCPT command is a 2'##xx' code, the verification
+succeeds. If it is 5##'xx', the verification fails. For any other condition,
+Exim tries the next host, if any. If there is a problem with all the remote
+hosts, the ACL yields ``defer'', unless the %defer_ok% parameter of the
+%callout% option is given, in which case the condition is forced to succeed.
+
+
+
+
+
+[[CALLaddparcall]]
+Additional parameters for callouts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[callout,additional parameters for]
+The %callout% option can be followed by an equals sign and a number of optional
+parameters, separated by commas. For example:
+
+ verify = recipient/callout=10s,defer_ok
+
+The old syntax, which had %callout_defer_ok% and %check_postmaster% as
+separate verify options, is retained for backwards compatibility, but is now
+deprecated. The additional parameters for %callout% are as follows:
+
+
+<'a~time~interval'>::
+cindex:[callout timeout, specifying]
+This specifies the timeout that applies for the callout attempt to each host.
+For example:
+
+ verify = sender/callout=5s
++
+The default is 30 seconds. The timeout is used for each response from the
+remote host. It is also used for the intial connection, unless overridden by
+the %connect% parameter.
+
+
+*connect~=~*<'time~interval'>::
+cindex:[callout connection timeout, specifying]
+This parameter makes it possible to set a different (usually smaller) timeout
+for making the SMTP connection. For example:
+
+ verify = sender/callout=5s,connect=1s
++
+If not specified, this timeout defaults to the general timeout value.
+
+*defer_ok*::
+cindex:[callout defer, action on]
+When this parameter is present, failure to contact any host, or any other kind
+of temporary error, is treated as success by the ACL. However, the cache is not
+updated in this circumstance.
+
+*mailfrom~=~*<'email~address'>::
+cindex:[callout,sender when verifying header]
+When verifying addresses in header lines using the %header_sender% verification
+option, Exim behaves by default as if the addresses are envelope sender
+addresses from a message. Callout verification therefore tests to see whether a
+bounce message could be delivered, by using an empty address in the MAIL
+command. However, it is arguable that these addresses might never be used as
+envelope senders, and could therefore justifiably reject bounce messages (empty
+senders). The %mailfrom% callout parameter allows you to specify what address
+to use in the MAIL command. For example:
+
+ require verify = header_sender/callout=mailfrom=abcd@x.y.z
++
+This parameter is available only for the %header_sender% verification option.
+
+
+*maxwait~=~*<'time~interval'>::
+cindex:[callout overall timeout, specifying]
+This parameter sets an overall timeout for performing a callout verification.
+For example:
+
+ verify = sender/callout=5s,maxwait=30s
++
+This timeout defaults to four times the callout timeout for individual SMTP
+commands. The overall timeout applies when there is more than one host that can
+be tried. The timeout is checked before trying the next host. This prevents
+very long delays if there are a large number of hosts and all are timing out
+(for example, when network connections are timing out).
+
+
+*no_cache*::
+cindex:[callout cache, suppressing]
+cindex:[caching callout, suppressing]
+When this parameter is given, the callout cache is neither read nor updated.
+
+*postmaster*::
+cindex:[callout,postmaster; checking]
+When this parameter is set, a sucessful callout check is followed by a similar
+check for the local part 'postmaster' at the same domain. If this address is
+rejected, the callout fails. The result of the postmaster check is recorded in
+a cache record; if it is a failure, this is used to fail subsequent callouts
+for the domain without a connection being made, until the cache record expires.
+
+*postmaster_mailfrom~=~*<'email~address'>::
+The postmaster check uses an empty sender in the MAIL command by default.
+You can use this parameter to do a postmaster check using a different address.
+For example:
+
+ require verify = sender/callout=postmaster_mailfrom=abc@x.y.z
++
+If both %postmaster% and %postmaster_mailfrom% are present, the rightmost one
+overrides. The %postmaster% parameter is equivalent to this example:
+
+ require verify = sender/callout=postmaster_mailfrom=
++
+*Warning*: The caching arrangements for postmaster checking do not take
+account of the sender address. It is assumed that either the empty address or
+a fixed non-empty address will be used. All that Exim remembers is that the
+postmaster check for the domain succeeded or failed.
+
+
+*random*::
+cindex:[callout,``random'' check]
+When this parameter is set, before doing the normal callout check, Exim does a
+check for a ``random'' local part at the same domain. The local part is not
+really random -- it is defined by the expansion of the option
+%callout_random_local_part%, which defaults to
+
+ $primary_host_name-$tod_epoch-testing
++
+The idea here is to try to determine whether the remote host accepts all local
+parts without checking. If it does, there is no point in doing callouts for
+specific local parts. If the ``random'' check succeeds, the result is saved in
+a cache record, and used to force the current and subsequent callout checks to
+succeed without a connection being made, until the cache record expires.
+
+*use_postmaster*::
+cindex:[callout,sender for recipient check]
+This parameter applies to recipient callouts only. For example:
+
+ deny !verify = recipient/callout=use_postmaster
++
+It causes a non-empty postmaster address to be used in the MAIL command
+when performing the callout. The local part of the address is `postmaster`
+and the domain is the contents of $qualify_domain$.
+
+*use_sender*::
+This option applies to recipient callouts only. For example:
+
+ require verify = recipient/callout=use_sender
++
+It causes the message's actual sender address to be used in the MAIL
+command when performing the callout, instead of an empty address. There is no
+need to use this option unless you know that the called hosts make use of the
+sender when checking recipients. If used indiscriminately, it reduces the
+usefulness of callout caching.
+
+///
+End of list
+///
+
+If you use any of the parameters that set a non-empty sender for the MAIL
+command (%mailfrom%, %postmaster_mailfrom%, %use_postmaster%, or
+%use_sender%), you should think about possible loops. Recipient checking is
+usually done between two hosts that are under the same management, and the host
+that receives the callouts is not normally configured to do callouts itself.
+Therefore, it is normally safe to use %use_postmaster% or %use_sender% in
+these circumstances.
+
+However, if you use a non-empty sender address for a callout to an arbitrary
+host, there is the likelihood that the remote host will itself initiate a
+callout check back to your host. As it is checking what appears to be a message
+sender, it is likely to use an empty address in MAIL, thus avoiding a
+callout loop. However, to be on the safe side it would be best to set up your
+own ACLs so that they do not do sender verification checks when the recipient
+is the address you use for header sender or postmaster callout checking.
+
+Another issue to think about when using non-empty senders for callouts is
+caching. When you set %mailfrom% or %use_sender%, the cache record is keyed by
+the sender/recipient combination; thus, for any given recipient, many more
+actual callouts are performed than when an empty sender or postmaster is used.
+
+
+
+
+[[SECTcallvercache]]
+Callout caching
+~~~~~~~~~~~~~~~
+cindex:[hints database,callout cache]
+cindex:[callout,caching]
+cindex:[caching,callout]
+Exim caches the results of callouts in order to reduce the amount of resources
+used, unless you specify the %no_cache% parameter with the %callout% option.
+A hints database called ``callout'' is used for the cache. Two different record
+types are used: one records the result of a callout check for a specific
+address, and the other records information that applies to the entire domain
+(for example, that it accepts the local part 'postmaster').
+
+When an original callout fails, a detailed SMTP error message is given about
+the failure. However, for subsequent failures use the cache data, this message
+is not available.
+
+The expiry times for negative and positive address cache records are
+independent, and can be set by the global options %callout_negative_expire%
+(default 2h) and %callout_positive_expire% (default 24h), respectively.
+
+If a host gives a negative response to an SMTP connection, or rejects any
+commands up to and including
+
+ MAIL FROM:<>
+
+(but not including the MAIL command with a non-empty address),
+any callout attempt is bound to fail. Exim remembers such failures in a
+domain cache record, which it uses to fail callouts for the domain without
+making new connections, until the domain record times out. There are two
+separate expiry times for domain cache records:
+%callout_domain_negative_expire% (default 3h) and
+%callout_domain_positive_expire% (default 7d).
+
+Domain records expire when the negative expiry time is reached if callouts
+cannot be made for the domain, or if the postmaster check failed.
+Otherwise, they expire when the positive expiry time is reached. This
+ensures that, for example, a host that stops accepting ``random'' local parts
+will eventually be noticed.
+
+The callout caching mechanism is based on the domain of the address that is
+being tested. If the domain routes to several hosts, it is assumed that their
+behaviour will be the same.
+
+
+
+[[SECTsenaddver]]
+Sender address verification reporting
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[verifying,suppressing error details]
+When sender verification fails in an ACL, the details of the failure are
+given as additional output lines before the 550 response to the relevant
+SMTP command (RCPT or DATA). For example, if sender callout is in use,
+you might see:
+
+ MAIL FROM:<xyz@abc.example>
+ 250 OK
+ RCPT TO:<pqr@def.example>
+ 550-Verification failed for <xyz@abc.example>
+ 550-Called: 192.168.34.43
+ 550-Sent: RCPT TO:<xyz@abc.example>
+ 550-Response: 550 Unknown local part xyz in <xyz@abc.example>
+ 550 Sender verification failed
+
+If more than one RCPT command fails in the same way, the details are given
+only for the first of them. However, some administrators do not want to send
+out this much information. You can suppress the details by adding
+``/no_details'' to the ACL statement that requests sender verification. For
+example:
+
+ verify = sender/no_details
+
+
+
+
+Redirection while verifying
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[verifying,redirection while]
+cindex:[address redirection,while verifying]
+A dilemma arises when a local address is redirected by aliasing or forwarding
+during verification: should the generated addresses themselves be verified,
+or should the successful expansion of the original address be enough to verify
+it? Exim takes the following pragmatic approach:
+
+- When an incoming address is redirected to just one child address, verification
+continues with the child address, and if that fails to verify, the original
+verification also fails.
+
+- When an incoming address is redirected to more than one child address,
+verification does not continue. A success result is returned.
+
+This seems the most reasonable behaviour for the common use of aliasing as a
+way of redirecting different local parts to the same mailbox. It means, for
+example, that a pair of alias entries of the form
+
+ A.Wol: aw123
+ aw123: :fail: Gone away, no forwarding address
+
+work as expected, with both local parts causing verification failure. When a
+redirection generates more than one address, the behaviour is more like a
+mailing list, where the existence of the alias itself is sufficient for
+verification to succeed.
+
+
+
+[[SECTrelaycontrol]]
+Using an ACL to control relaying
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[{ACL},relay control]
+cindex:[relaying,control by ACL]
+cindex:[policy control,relay control]
+An MTA is said to 'relay' a message if it receives it from some host and
+delivers it directly to another host as a result of a remote address contained
+within it. Redirecting a local address via an alias or forward file and then
+passing the message on to another host is not relaying,
+
+cindex:[``percent hack'']
+but a redirection as a result of the ``percent hack'' is.
+
+Two kinds of relaying exist, which are termed ``incoming'' and ``outgoing''.
+A host which is acting as a gateway or an MX backup is concerned with incoming
+relaying from arbitrary hosts to a specific set of domains. On the other hand,
+a host which is acting as a smart host for a number of clients is concerned
+with outgoing relaying from those clients to the Internet at large. Often the
+same host is fulfilling both functions,
+///
+as illustrated in the diagram below,
+///
+but in principle these two kinds of relaying are entirely independent. What is
+not wanted is the transmission of mail from arbitrary remote hosts through your
+system to arbitrary domains.
+
+
+You can implement relay control by means of suitable statements in the ACL that
+runs for each RCPT command. For convenience, it is often easiest to use
+Exim's named list facility to define the domains and hosts involved. For
+example, suppose you want to do the following:
+
+- Deliver a number of domains to mailboxes on the local host (or process them
+locally in some other way). Let's say these are 'my.dom1.example' and
+'my.dom2.example'.
+
+- Relay mail for a number of other domains for which you are the secondary MX.
+These might be 'friend1.example' and 'friend2.example'.
+
+- Relay mail from the hosts on your local LAN, to whatever domains are involved.
+Suppose your LAN is 192.168.45.0/24.
+
+
+In the main part of the configuration, you put the following definitions:
+
+ domainlist local_domains = my.dom1.example : my.dom2.example
+ domainlist relay_domains = friend1.example : friend2.example
+ hostlist relay_hosts = 192.168.45.0/24
+
+Now you can use these definitions in the ACL that is run for every RCPT
+command:
+
+ acl_check_rcpt:
+ accept domains = +local_domains : +relay_domains
+ accept hosts = +relay_hosts
+
+The first statement accepts any RCPT command that contains an address in
+the local or relay domains. For any other domain, control passes to the second
+statement, which accepts the command only if it comes from one of the relay
+hosts. In practice, you will probably want to make your ACL more sophisticated
+than this, for example, by including sender and recipient verification. The
+default configuration includes a more comprehensive example, which is described
+in chapter <<CHAPdefconfil>>.
+
+
+
+[[SECTcheralcon]]
+Checking a relay configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[relaying,checking control of]
+You can check the relay characteristics of your configuration in the same way
+that you can test any ACL behaviour for an incoming SMTP connection, by using
+the %-bh% option to run a fake SMTP session with which you interact.
+
+For specifically testing for unwanted relaying, the host
+'relay-test.mail-abuse.org' provides a useful service. If you telnet to this
+host from the host on which Exim is running, using the normal telnet port, you
+will see a normal telnet connection message and then quite a long delay. Be
+patient. The remote host is making an SMTP connection back to your host, and
+trying a number of common probes to test for open relay vulnerability. The
+results of the tests will eventually appear on your terminal.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPexiscan]]
+Content scanning
+----------------
+cindex:[content scanning]
+The content-scanning extension of Exim, formerly known as ``exiscan'', was
+originally implemented as a patch by Tom Kistner. The code was integrated into
+the main source for Exim release 4.50, and Tom continues to maintain it. Most
+of the wording of this chapter is taken from Tom's specification.
+
+If you want to include the content-scanning features when you compile Exim, you
+need to arrange for WITH_CONTENT_SCAN to be defined in your
+_Local/Makefile_. When you do that, the Exim binary is built with:
+
+- An additional ACL (%acl_smtp_mime%) that is run for all MIME parts.
+
+- Additional ACL conditions and modifiers: %decode%, %malware%, %mime_regex%,
+%regex%, and %spam%. These can be used in the ACL that is run at the end of
+message reception (the %acl_smtp_data% ACL).
+
+- An additional control feature (``no_mbox_unspool'') that saves spooled copies
+of messages, or parts of messages, for debugging purposes.
+
+- Additional expansion variables that are set in the new ACL and by the new
+conditions.
+
+- Two new main configuration options: %av_scanner% and %spamd_address%.
+
+There is another content-scanning configuration option for _Local/Makefile_,
+called WITH_OLD_DEMIME. If this is set, the old, deprecated %demime% ACL
+condition is compiled, in addition to all the other content-scanning features.
+
+Content-scanning is continually evolving, and new features are still being
+added. While such features are still unstable and liable to incompatible
+changes, they are made available in Exim by setting options whose names begin
+EXPERIMENTAL_ in _Local/Makefile_. Such features are not documented in
+this manual. You can find out about them by reading the file called
+_doc/experimental.txt_.
+
+All the content-scanning facilites work on a MBOX copy of the message that is
+temporarily created in a file called:
+
+ <spool_directory>/scan/<message_id>/<message_id>.eml
+
+The _.eml_ extension is a friendly hint to virus scanners that they can
+expect an MBOX-like structure inside that file. The file is created when the
+first content scanning facility is called. Subsequent calls to content
+scanning conditions open the same file again. The directory is recursively
+removed when the %acl_smtp_data% ACL has finished running, unless
+
+ control = no_mbox_unspool
+
+has been encountered. When the MIME ACL decodes files, they are put into the
+same directory by default.
+
+
+
+[[SECTscanvirus]]
+Scanning for viruses
+~~~~~~~~~~~~~~~~~~~~
+cindex:[virus scanning]
+cindex:[content scanning,for viruses]
+cindex:[content scanning,the %malware% condition]
+The %malware% ACL condition lets you connect virus scanner software to Exim. It
+supports a ``generic'' interface to scanners called via the shell, and
+specialized interfaces for ``daemon'' type virus scanners, which are resident in
+memory and thus are much faster.
+
+cindex:[%av_scanner%]
+You can set the %av_scanner% option in first part of the Exim configuration
+file to specify which scanner to use, together with any additional options that
+are needed. The basic syntax is as follows:
+
+ av_scanner = <scanner-type>:<option1>:<option2>:[...]
+
+If you do not set %av_scanner%, it defaults to
+
+ av_scanner = sophie:/var/run/sophie
+
+If the value of %av_scanner% starts with dollar character, it is expanded
+before use.
+
+The following scanner types are supported in this release:
+
+%aveserver%::
+cindex:[virus scanners,Kaspersky]
+This is the scanner daemon of Kaspersky Version 5. You can get a trial version
+at *http://www.kaspersky.com[]*. This scanner type takes one option, which is
+the path to the daemon's UNIX socket. The default is shown in this example:
+
+ av_scanner = aveserver:/var/run/aveserver
+
+%clamd%::
+cindex:[virus scanners,clamd]
+This daemon-type scanner is GPL and free. You can get it at
+*http://www.clamav.net/[]*. Clamd does not seem to unpack MIME containers, so
+it is recommended to unpack MIME attachments in the MIME ACL. It takes one
+option: either the path and name of a UNIX socket file, or a hostname or IP
+number, and a port, separated by space, as in the second of these examples:
+
+ av_scanner = clamd:/opt/clamd/socket
+ av_scanner = clamd:192.168.2.100 1234
++
+If the option is unset, the default is _/tmp/clamd_. Thanks to David Saez for
+contributing the code for this scanner.
+
+%cmdline%::
+cindex:[virus scanners,command line interface]
+This is the keyword for the generic command line scanner interface. It can be
+used to attach virus scanners that are invoked from the shell. This scanner
+type takes 3 mandatory options:
++
+--
+. The full path and name of the scanner binary, with all command line options,
+and a placeholder (%s) for the directory to scan.
+
+. A regular expression to match against the STDOUT and STDERR output of the
+virus scanner. If the expression matches, a virus was found. You must make
+absolutely sure that this expression matches on ``virus found''. This is called
+the ``trigger'' expression.
+
+. Another regular expression, containing exactly one pair of parentheses, to
+match the name of the virus found in the scanners output. This is called the
+``name'' expression.
+--
++
+For example, Sophos Sweep reports a virus on a line like this:
+
+ Virus 'W32/Magistr-B' found in file ./those.bat
++
+For the trigger expression, we can just match the word ``found''. For the name
+expression, we want to extract the W32/Magistr-B string, so we can match for
+the single quotes left and right of it. Altogether, this makes the
+configuration setting:
++
+....
+av_scanner = cmdline:\
+ /path/to/sweep -all -rec -archive %s:\
+ found:'(.+)'
+....
+
+
+%drweb%::
+cindex:[virus scanners,DrWeb]
+The DrWeb daemon scanner (*http://www.sald.com/[]*) interface takes one
+argument, either a full path to a UNIX socket, or an IP address and port
+separated by whitespace, as in these examples:
+
+ av_scanner = drweb:/var/run/drwebd.sock
+ av_scanner = drweb:192.168.2.20 31337
++
+If you omit the argument, the default path _/usr/local/drweb/run/drwebd.sock_
+is used. Thanks to Alex Miller for contributing the code for this scanner.
+
+%fsecure%::
+cindex:[virus scanners,F-Secure]
+The F-Secure daemon scanner (*http://www.f-secure.com[]*) takes one argument
+which is the path to a UNIX socket. For example:
+
+ av_scanner = fsecure:/path/to/.fsav
++
+If no argument is given, the default is _/var/run/.fsav_. Thanks to Johan
+Thelmen for contributing the code for this scanner.
+
+%kavdaemon%::
+cindex:[virus scanners,Kaspersky]
+This is the scanner daemon of Kaspersky Version 4. This version of the
+Kaspersky scanner is outdated. Please upgrade (see %aveserver% above). This
+scanner type takes one option, which is the path to the daemon's UNIX socket.
+For example:
+
+ av_scanner = kavdaemon:/opt/AVP/AvpCtl
++
+The default path is _/var/run/AvpCtl_.
+
+%mksd%::
+cindex:[virus scanners,mksd]
+This is a daemon type scanner that is aimed mainly at Polish users, though some
+parts of documentation are now available in English. You can get it at
+*http://linux.mks.com.pl/[]*. The only option for this scanner type is the
+maximum number of processes used simultaneously to scan the attachments,
+provided that the demime facility is employed and also provided that mksd has
+been run with at least the same number of child processes. For example:
+
+ av_scanner = mksd:2
++
+You can safely omit this option (the default value is 1).
+
+%sophie%::
+cindex:[virus scanners,Sophos and Sophie]
+Sophie is a daemon that uses Sophos' %libsavi% library to scan for viruses. You
+can get Sophie at *http://www.vanja.com/tools/sophie/[]*. The only option for
+this scanner type is the path to the UNIX socket that Sophie uses for client
+communication. For example:
+
+ av_scanner = sophie:/tmp/sophie
++
+The default path is _/var/run/sophie_, so if you are using this, you can omit
+the option.
+
+///
+End of list
+///
+
+When %av_scanner% is correctly set, you can use the %malware% condition in the
+DATA ACL. The %av_scanner% option is expanded each time %malware% is
+called. This makes it possible to use different scanners. See further below for
+an example. The %malware% condition caches its results, so when you use it
+multiple times for the same message, the actual scanning process is only
+carried out once. However, using expandable items in %av_scanner% disables
+this caching, in which case each use of the %malware% condition causes a new
+scan of the message.
+
+The %malware% condition takes a right-hand argument that is expanded before
+use. It can then be one of
+
+- ``true'', ``\*'', or ``1'', in which case the message is scanned for viruses.
+The condition succeeds if a virus was found, and fail otherwise. This is the
+recommended usage.
+
+- ``false'' or ``0'', in which case no scanning is done and the condition fails
+immediately.
+
+- A regular expression, in which case the message is scanned for viruses. The
+condition succeeds if a virus is found and its name matches the regular
+expression. This allows you to take special actions on certain types of virus.
+
+You can append `/defer_ok` to the %malware% condition to accept messages even
+if there is a problem with the virus scanner.
+
+cindex:[$malware_name$]
+When a virus is found, the condition sets up an expansion variable called
+$malware_name$ that contains the name of the virus. You can use it in a
+%message% modifier that specifies the error returned to the sender, and/or in
+logging data.
+
+If your virus scanner cannot unpack MIME and TNEF containers itself, you should
+use the %demime% condition (see section <<SECTdemimecond>>) before the %malware%
+condition.
+
+Here is a very simple scanning example:
+
+ deny message = This message contains malware ($malware_name)
+ demime = *
+ malware = *
+
+The next example accepts messages when there is a problem with the scanner:
+
+ deny message = This message contains malware ($malware_name)
+ demime = *
+ malware = */defer_ok
+
+The next example shows how to use an ACL variable to scan with both sophie and
+aveserver. It assumes you have set:
+
+ av_scanner = $acl_m0
+
+in the main Exim configuration.
+
+ deny message = This message contains malware ($malware_name)
+ set acl_m0 = sophie
+ malware = *
+
+ deny message = This message contains malware ($malware_name)
+ set acl_m0 = aveserver
+ malware = *
+
+
+
+
+[[SECTscanspamass]]
+Scanning with SpamAssassin
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[content scanning,for spam]
+cindex:[spam scanning]
+cindex:[SpamAssassin, scanning with]
+The %spam% ACL condition calls SpamAssassin's %spamd% daemon to get a spam
+score and a report for the message. You can get SpamAssassin at
+*http://www.spamassassin.org[]*, or, if you have a working Perl installation,
+you can use CPAN by running:
+
+ perl -MCPAN -e 'install Mail::SpamAssassin'
+
+SpamAssassin has its own set of configuration files. Please review its
+documentation to see how you can tweak it. The default installation should work
+nicely, however.
+
+cindex:[%spamd_address%]
+After having installed and configured SpamAssassin, start the %spamd% daemon.
+By default, it listens on 127.0.0.1, TCP port 783. If you use another host or
+port for %spamd%, you must set the %spamd_address% option in the global part
+of the Exim configuration as follows (example):
+
+ spamd_address = 192.168.99.45 387
+
+You do not need to set this option if you use the default. As of version 2.60,
+%spamd% also supports communication over UNIX sockets. If you want to use
+these, supply %spamd_address% with an absolute file name instead of a
+address/port pair:
+
+ spamd_address = /var/run/spamd_socket
+
+
+You can have multiple %spamd% servers to improve scalability. These can reside
+on other hardware reachable over the network. To specify multiple %spamd%
+servers, put multiple address/port pairs in the %spamd_address% option,
+separated with colons:
+
+....
+spamd_address = 192.168.2.10 783 : \
+ 192.168.2.11 783 : \
+ 192.168.2.12 783
+....
+
+Up to 32 %spamd% servers are supported. The servers are
+queried in a random fashion. When a server fails to respond
+to the connection attempt, all other servers are tried
+until one succeeds. If no server responds, the %spam%
+condition defers.
+
+*Warning*: It is not possible to use the UNIX socket connection method with
+multiple %spamd% servers.
+
+Here is a simple example of the use of the %spam% condition in a DATA ACL:
+
+ deny message = This message was classified as SPAM
+ spam = joe
+
+The right-hand side of the %spam% condition specifies the username that
+SpamAssassin should scan for. If you do not want to scan for a particular user,
+but rather use the SpamAssassin system-wide default profile, you can scan for
+an unknown user, or simply use ``nobody''. However, you must put something on the
+right-hand side.
+
+The username allows you to use per-domain or per-user antispam profiles. The
+right-hand side is expanded before being used, so you can put lookups or
+conditions there. When the right-hand side evaluates to ``0'' or ``false'', no
+scanning is done and the condition fails immediately.
+
+The %spam% condition returns true if the threshold specified in the user's
+SpamAssassin profile has been matched or exceeded. If you want to use the
+%spam% condition for its side effects (see the variables below), you can make
+it always return ``true'' by appending `:true` to the username.
+
+cindex:[spam scanning,returned variables]
+When the %spam% condition is run, it sets up the following expansion
+variables:
+
+$spam_score$::
+The spam score of the message, for example ``3.4'' or ``30.5''. This is useful
+for inclusion in log or reject messages.
+
+$spam_score_int$::
+The spam score of the message, multiplied by ten, as an integer value. For
+example ``34'' or ``305''. This is useful for numeric comparisons in
+conditions. This variable is special; it is saved with the message, and written
+to Exim's spool file. This means that it can be used during the whole life of
+the message on your Exim system, in particular, in routers or transports during
+the later delivery phase.
+
+$spam_bar$::
+A string consisting of a number of ``+'' or ``-'' characters, representing the
+integer part of the spam score value. A spam score of 4.4 would have a
+$spam_bar$ value of ``++++''. This is useful for inclusion in warning headers,
+since MUAs can match on such strings.
+
+$spam_report$::
+A multiline text table, containing the full SpamAssassin report for the
+message. Useful for inclusion in headers or reject messages.
+
+///
+End of list
+///
+
+The %spam% condition caches its results. If you call it again with the same
+user name, it does not scan again, but rather returns the same values as
+before.
+
+The %spam% condition returns DEFER if there is any error while running the
+message through SpamAssassin. If you want to treat DEFER as FAIL (to pass on to
+the next ACL statement block), append `/defer_ok` to the right-hand side of
+the spam condition, like this:
+
+ deny message = This message was classified as SPAM
+ spam = joe/defer_ok
+
+This causes messages to be accepted even if there is a
+problem with %spamd%.
+
+Here is a longer, commented example of the use of the %spam%
+condition:
+
+ # put headers in all messages (no matter if spam or not)
+ warn message = X-Spam-Score: $spam_score ($spam_bar)
+ spam = nobody:true
+ warn message = X-Spam-Report: $spam_report
+ spam = nobody:true
+
+ # add second subject line with *SPAM* marker when message
+ # is over threshold
+ warn message = Subject: *SPAM* $h_Subject:
+ spam = nobody
+
+ # reject spam at high scores (> 12)
+ deny message = This message scored $spam_score spam points.
+ spam = nobody:true
+ condition = ${if >{$spam_score_int}{120}{1}{0}}
+
+
+
+
+
+[[SECTscanmimepart]]
+Scanning MIME parts
+~~~~~~~~~~~~~~~~~~~
+cindex:[content scanning,MIME parts]
+cindex:[MIME content scanning]
+cindex:[%acl_smtp_mime%]
+The %acl_smtp_mime% global option defines an ACL that is called once for each
+MIME part of a message, including multipart types, in the sequence of their
+position in the message.
+
+This ACL is called (possibly many times) just before the %acl_smtp_data% ACL,
+but only if the message has a 'MIME-Version:' header. When a call to the MIME
+ACL does not yield ``accept'', ACL processing is aborted and the appropriate
+result code is sent to the remote client. The %acl_smtp_data% ACL is not
+called in this circumstance.
+
+At the start of the MIME ACL, a number of variables are set from the header
+information for the relevant MIME part. These are described below. The contents
+of the MIME part are not by default decoded into a disk file except for MIME
+parts whose content-type is ``message/rfc822''. If you want to decode a MIME part
+into a disk file, you can use the %decode% modifier. The general syntax is:
+
+ decode = [/<path>/]<filename>
+
+The right hand side is expanded before use. After expansion,
+the value can be:
+
+. ``0'' or ``false'', in which case no decoding is done.
+
+. The string ``default''. In that case, the file is put in the temporary
+``default'' directory <'spool_directory'>_/scan/_<'message_id'>_/_ with a
+sequential file name consisting of the message id and a sequence number. The
+full path and name is available in $mime_decoded_filename$ after decoding.
+
+. A full path name starting with a slash. If the full name is an existing
+directory, it is used as a replacement for the default directory. The filename
+is then sequentially assigned. If the path does not exist, it is used as
+the full path and file name.
+
+. If the string does not start with a slash, it is used as the
+filename, and the default path is then used.
+
+///
+End of list
+///
+
+You can easily decode a file with its original, proposed filename using
+
+ decode = $mime_filename
+
+However, you should keep in mind that $mime_filename$ might contain
+anything. If you place files outside of the default path, they are not
+automatically unlinked.
+
+For RFC822 attachments (these are messages attached to messages, with a
+content-type of ``message/rfc822''), the ACL is called again in the same manner
+as for the primary message, only that the $mime_is_rfc822$ expansion
+variable is set (see below). Attached messages are always decoded to disk
+before being checked, and the files are unlinked once the check is done.
+
+The MIME ACL supports the %regex% and %mime_regex% conditions. These can be
+used to match regular expressions against raw and decoded MIME parts,
+respectively. They are described in section <<SECTscanregex>>.
+
+cindex:[MIME content scanning,returned variables]
+The following list describes all expansion variables that are
+available in the MIME ACL:
+
+$mime_boundary$::
+If the current part is a multipart (see $mime_is_multipart$) below, it should
+have a boundary string, which is stored in this variable. If the current part
+has no boundary parameter in the 'Content-Type:' header, this variable contains
+the empty string.
+
+$mime_charset$::
+This variable contains the character set identifier, if one was found in the
+'Content-Type:' header. Examples for charset identifiers are:
+
+ us-ascii
+ gb2312 (Chinese)
+ iso-8859-1
++
+Please note that this value is not normalized, so you should do matches
+case-insensitively.
+
+$mime_content_description$::
+This variable contains the normalized content of the 'Content-Description:'
+header. It can contain a human-readable description of the parts content. Some
+implementations repeat the filename for attachments here, but they are usually
+only used for display purposes.
+
+$mime_content_disposition$::
+This variable contains the normalized content of the 'Content-Disposition:'
+header. You can expect strings like ``attachment'' or ``inline'' here.
+
+$mime_content_id$::
+This variable contains the normalized content of the 'Content-ID:' header.
+This is a unique ID that can be used to reference a part from another part.
+
+$mime_content_size$::
+This variable is set only after the %decode% modifier (see above) has been
+successfully run. It contains the size of the decoded part in kilobytes. The
+size is always rounded up to full kilobytes, so only a completely empty part
+has a $mime_content_size$ of zero.
+
+$mime_content_transfer_encoding$::
+This variable contains the normalized content of the
+'Content-transfer-encoding:' header. This is a symbolic name for an encoding
+type. Typical values are ``base64'' and ``quoted-printable''.
+
+$mime_content_type$::
+If the MIME part has a 'Content-Type:' header, this variable contains its
+value, lowercased, and without any options (like ``name'' or ``charset''). Here
+are some examples of popular MIME types, as they may appear in this variable:
+
+ text/plain
+ text/html
+ application/octet-stream
+ image/jpeg
+ audio/midi
++
+If the MIME part has no 'Content-Type:' header, this variable contains the
+empty string.
+
+$mime_decoded_filename$::
+This variable is set only after the %decode% modifier (see above) has been
+successfully run. It contains the full path and file name of the file
+containing the decoded data.
+
+$mime_filename$::
+This is perhaps the most important of the MIME variables. It contains a
+proposed filename for an attachment, if one was found in either the
+'Content-Type:' or 'Content-Disposition:' headers. The filename will be RFC2047
+decoded, but no additional sanity checks are done. If no filename was found,
+this variable contains the empty string.
+
+$mime_is_coverletter$::
+This variable attempts to differentiate the ``cover letter'' of an e-mail from
+attached data. It can be used to clamp down on flashy or unneccessarily encoded
+content in the cover letter, while not restricting attachments at all.
++
+The variable contains 1 (true) for a MIME part believed to be part of the
+cover letter, and 0 (false) for an attachment. At present, the algorithm is as
+follows:
++
+--
+. The outermost MIME part of a message is always a cover letter.
+
+. If a multipart/alternative or multipart/related MIME part is a cover letter, so
+are all MIME subparts within that multipart.
+
+. If any other multipart is a cover letter, the first subpart is a cover letter,
+and the rest are attachments.
+
+. All parts contained within an attachment multipart are attachments.
+--
++
+As an example, the following will ban ``HTML mail'' (including that sent with
+alternative plain text), while allowing HTML files to be attached. HTML
+coverletter mail attached to non-HMTL coverletter mail will also be allowed:
+
+ deny message = HTML mail is not accepted here
+ !condition = $mime_is_rfc822
+ condition = $mime_is_coverletter
+ condition = ${if eq{$mime_content_type}{text/html}{1}{0}}
+
+$mime_is_multipart$::
+This variable has the value 1 (true) when the current part has the main type
+``multipart'', for example ``multipart/alternative'' or ``multipart/mixed''.
+Since multipart entities only serve as containers for other parts, you may not
+want to carry out specific actions on them.
+
+$mime_is_rfc822$::
+This variable has the value 1 (true) if the current part is not a part of the
+checked message itself, but part of an attached message. Attached message
+decoding is fully recursive.
+
+$mime_part_count$::
+This variable is a counter that is raised for each processed MIME part. It
+starts at zero for the very first part (which is usually a multipart). The
+counter is per-message, so it is reset when processing RFC822 attachments (see
+$mime_is_rfc822$). The counter stays set after %acl_smtp_mime% is
+complete, so you can use it in the DATA ACL to determine the number of MIME
+parts of a message. For non-MIME messages, this variable contains the value -1.
+
+
+
+[[SECTscanregex]]
+Scanning with regular expressions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[content scanning,with regular expressions]
+cindex:[regular expressions,content scanning with]
+You can specify your own custom regular expression matches on the full body of
+the message, or on individual MIME parts.
+
+The %regex% condition takes one or more regular expressions as arguments and
+matches them against the full message (when called in the DATA ACL) or a raw
+MIME part (when called in the MIME ACL). The %regex% condition matches
+linewise, with a maximum line length of 32K characters. That means you cannot
+have multiline matches with the %regex% condition.
+
+The %mime_regex% condition can be called only in the MIME ACL. It matches up
+to 32K of decoded content (the whole content at once, not linewise). If the
+part has not been decoded with the %decode% modifier earlier in the ACL, it is
+decoded automatically when %mime_regex% is executed (using default path and
+filename values). If the decoded data is larger than 32K, only the first 32K
+characters are checked.
+
+The regular expressions are passed as a colon-separated list. To include a
+literal colon, you must double it. Since the whole right-hand side string is
+expanded before being used, you must also escape dollar signs and backslashes
+with more backslashes, or use the `\N` facility to disable expansion.
+Here is a simple example that contains two regular expressions:
+
+ deny message = contains blacklisted regex ($regex_match_string)
+ regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL
+
+The conditions returns true if any one of the regular expressions matches. The
+$regex_match_string$ expansion variable is then set up and contains the
+matching regular expression.
+
+*Warning*: With large messages, these conditions can be fairly
+CPU-intensive.
+
+
+
+
+[[SECTdemimecond]]
+The demime condition
+~~~~~~~~~~~~~~~~~~~~
+cindex:[content scanning,MIME checking]
+cindex:[MIME content scanning]
+The %demime% ACL condition provides MIME unpacking, sanity checking and file
+extension blocking. It uses a simpler interface to MIME decoding than the MIME
+ACL functionality, but provides no additional facilities. Please note that this
+condition is deprecated and kept only for for backward compatibility. You must
+set the WITH_OLD_DEMIME option in _Local/Makefile_ at build time to be
+able to use the %demime% condition.
+
+The %demime% condition unpacks MIME containers in the message. It detects
+errors in MIME containers and can match file extensions found in the message
+against a list. Using this facility produces files containing the unpacked MIME
+parts of the message in the temporary scan directory. If you do antivirus
+scanning, it is recommened that you use the %demime% condition before the
+antivirus (%malware%) condition.
+
+On the right-hand side of the %demime% condition you can pass a colon-separated
+list of file extensions that it should match against. For example:
+
+ deny message = Found blacklisted file attachment
+ demime = vbs:com:bat:pif:prf:lnk
+
+If one of the file extensions is found, the condition is true, otherwise it is
+false. If there is a temporary error while demimeing (for example, ``disk
+full''), the condition defers, and the message is temporarily rejected (unless
+the condition is on a %warn% verb).
+
+The right-hand side is expanded before being treated as a list, so you can have
+conditions and lookups there. If it expands to an empty string, ``false'', or
+zero (``0''), no demimeing is done and the condition is false.
+
+The %demime% condition set the following variables:
+
+$demime_errorlevel$::
+When an error is detected in a MIME container, this variable contains the
+severity of the error, as an integer number. The higher the value, the more
+severe the error. If this variable is unset or zero, no error occurred.
+
+$demime_reason$::
+When $demime_errorlevel$ is greater than zero, this variable contains a
+human-readable text string describing the MIME error that occurred.
+
+$found_extension$::
+When the %demime% condition is true, this variable contains the file extension
+it found.
+
+///
+End of list
+///
+
+Both $demime_errorlevel$ and $demime_reason$ are set by the first call of
+the %demime% condition, and are not changed on subsequent calls.
+
+If you do not want to check for file extensions, but rather use the %demime%
+condition for unpacking or error checking purposes, pass ``\*'' as the
+right-hand side value. Here is a more elaborate example of how to use this
+facility:
+
+ # Reject messages with serious MIME container errors
+ deny message = Found MIME error ($demime_reason).
+ demime = *
+ condition = ${if >{$demime_errorlevel}{2}{1}{0}}
+
+ # Reject known virus spreading file extensions.
+ # Accepting these is pretty much braindead.
+ deny message = contains $found_extension file (blacklisted).
+ demime = com:vbs:bat:pif:scr
+
+ # Freeze .exe and .doc files. Postmaster can
+ # examine them and eventually thaw them.
+ deny log_message = Another $found_extension file.
+ demime = exe:doc
+ control = freeze
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPlocalscan]]
+[titleabbrev="Local scan function"]
+Adding a local scan function to Exim
+------------------------------------
+cindex:['local_scan()' function,description of]
+cindex:[customizing,input scan using C function]
+cindex:[policy control,by local scan function]
+In these days of email worms, viruses, and ever-increasing spam, some sites
+want to apply a lot of checking to messages before accepting them.
+
+The content scanning extension (chapter <<CHAPexiscan>>) has facilities for
+passing messages to external virus and spam scanning software. You can also do
+
+a certain amount in Exim itself through string expansions and the %condition%
+condition in the ACL that runs after the SMTP DATA command or the ACL for
+non-SMTP messages (see chapter <<CHAPACL>>), but this has its limitations.
+
+To allow for further customization to a site's own requirements, there is the
+possibility of linking Exim with a private message scanning function, written
+in C. If you want to run code that is written in something other than C, you
+can of course use a little C stub to call it.
+
+The local scan function is run once for every incoming message, at the point
+when Exim is just about to accept the message.
+It can therefore be used to control non-SMTP messages from local processes as
+well as messages arriving via SMTP.
+
+Exim applies a timeout to calls of the local scan function, and there is an
+option called %local_scan_timeout% for setting it. The default is 5 minutes.
+Zero means ``no timeout''.
+Exim also sets up signal handlers for SIGSEGV, SIGILL, SIGFPE, and SIGBUS
+before calling the local scan function, so that the most common types of crash
+are caught. If the timeout is exceeded or one of those signals is caught, the
+incoming message is rejected with a temporary error if it is an SMTP message.
+For a non-SMTP message, the message is dropped and Exim ends with a non-zero
+code. The incident is logged on the main and reject logs.
+
+
+
+Building Exim to use a local scan function
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['local_scan()' function,building Exim to use]
+To make use of the local scan function feature, you must tell Exim where your
+function is before building Exim, by setting LOCAL_SCAN_SOURCE in your
+_Local/Makefile_. A recommended place to put it is in the _Local_
+directory, so you might set
+
+ LOCAL_SCAN_SOURCE=Local/local_scan.c
+
+for example. The function must be called 'local_scan()'. It is called by
+Exim after it has received a message, when the success return code is about to
+be sent. This is after all the ACLs have been run. The return code from your
+function controls whether the message is actually accepted or not. There is a
+commented template function (that just accepts the message) in the file
+_src/local_scan.c_.
+
+If you want to make use of Exim's run time configuration file to set options
+for your 'local_scan()' function, you must also set
+
+ LOCAL_SCAN_HAS_OPTIONS=yes
+
+in _Local/Makefile_ (see section <<SECTconoptloc>> below).
+
+
+
+
+[[SECTapiforloc]]
+API for local_scan()
+~~~~~~~~~~~~~~~~~~~~
+cindex:['local_scan()' function,API description]
+You must include this line near the start of your code:
+
+ #include "local_scan.h"
+
+This header file defines a number of variables and other values, and the
+prototype for the function itself. Exim is coded to use unsigned char values
+almost exclusively, and one of the things this header defines is a shorthand
+for `unsigned char` called `uschar`.
+It also contains the following macro definitions, to simplify casting character
+strings and pointers to character strings:
+
+ #define CS (char *)
+ #define CCS (const char *)
+ #define CSS (char **)
+ #define US (unsigned char *)
+ #define CUS (const unsigned char *)
+ #define USS (unsigned char **)
+
+
+The function prototype for 'local_scan()' is:
+
+ extern int local_scan(int fd, uschar **return_text);
+
+The arguments are as follows:
+
+- %fd% is a file descriptor for the file that contains the body of the message
+(the -D file). The file is open for reading and writing, but updating it is not
+recommended. *Warning*: You must 'not' close this file descriptor.
++
+The descriptor is positioned at character 19 of the file, which is the first
+character of the body itself, because the first 19 characters are the message
+id followed by `-D` and a newline. If you rewind the file, you should use the
+macro SPOOL_DATA_START_OFFSET to reset to the start of the data, just in
+case this changes in some future version.
+
+- %return_text% is an address which you can use to return a pointer to a text
+string at the end of the function. The value it points to on entry is NULL.
+
+The function must return an %int% value which is one of the following macros:
+
+`LOCAL_SCAN_ACCEPT`::
+The message is accepted. If you pass back a string of text, it is saved with
+the message, and made available in the variable $local_scan_data$. No
+newlines are permitted (if there are any, they are turned into spaces) and the
+maximum length of text is 1000 characters.
+
+`LOCAL_SCAN_ACCEPT_FREEZE`::
+This behaves as LOCAL_SCAN_ACCEPT, except that the accepted message is
+queued without immediate delivery, and is frozen.
+
+`LOCAL_SCAN_ACCEPT_QUEUE`::
+This behaves as LOCAL_SCAN_ACCEPT, except that the accepted message is
+queued without immediate delivery.
+
+`LOCAL_SCAN_REJECT`::
+The message is rejected; the returned text is used as an error message which is
+passed back to the sender and which is also logged. Newlines are permitted --
+they cause a multiline response for SMTP rejections, but are converted to `\n`
+in log lines. If no message is given, ``Administrative prohibition'' is used.
+
+`LOCAL_SCAN_TEMPREJECT`::
+The message is temporarily rejected; the returned text is used as an error
+message as for LOCAL_SCAN_REJECT. If no message is given, ``Temporary local
+problem'' is used.
+
+`LOCAL_SCAN_REJECT_NOLOGHDR`::
+This behaves as LOCAL_SCAN_REJECT, except that the header of the rejected
+message is not written to the reject log. It has the effect of unsetting the
+%rejected_header% log selector for just this rejection. If %rejected_header%
+is already unset (see the discussion of the %log_selection% option in section
+<<SECTlogselector>>), this code is the same as LOCAL_SCAN_REJECT.
+
+`LOCAL_SCAN_TEMPREJECT_NOLOGHDR`::
+This code is a variation of LOCAL_SCAN_TEMPREJECT in the same way that
+LOCAL_SCAN_REJECT_NOLOGHDR is a variation of LOCAL_SCAN_REJECT.
+
+///
+End of list
+///
+
+If the message is not being received by interactive SMTP, rejections are
+reported by writing to %stderr% or by sending an email, as configured by the
+%-oe% command line options.
+
+
+
+[[SECTconoptloc]]
+Configuration options for local_scan()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['local_scan()' function,configuration options]
+It is possible to have option settings in the main configuration file
+that set values in static variables in the 'local_scan()' module. If you
+want to do this, you must have the line
+
+ LOCAL_SCAN_HAS_OPTIONS=yes
+
+in your _Local/Makefile_ when you build Exim. (This line is in
+_OS/Makefile-Default_, commented out). Then, in the 'local_scan()' source
+file, you must define static variables to hold the option values, and a table to
+define them.
+
+The table must be a vector called %local_scan_options%, of type
+`optionlist`. Each entry is a triplet, consisting of a name, an option type,
+and a pointer to the variable that holds the value. The entries must appear in
+alphabetical order. Following %local_scan_options% you must also define a
+variable called %local_scan_options_count% that contains the number of
+entries in the table. Here is a short example, showing two kinds of option:
+
+ static int my_integer_option = 42;
+ static uschar *my_string_option = US"a default string";
+
+ optionlist local_scan_options[] = {
+ { "my_integer", opt_int, &my_integer_option },
+ { "my_string", opt_stringptr, &my_string_option }
+ };
+ int local_scan_options_count =
+ sizeof(local_scan_options)/sizeof(optionlist);
+
+The values of the variables can now be changed from Exim's runtime
+configuration file by including a local scan section as in this example:
+
+ begin local_scan
+ my_integer = 99
+ my_string = some string of text...
+
+The available types of option data are as follows:
+
+*opt_bool*::
+This specifies a boolean (true/false) option. The address should point to a
+variable of type `BOOL`, which will be set to TRUE or FALSE, which are macros
+that are defined as ``1'' and ``0'', respectively. If you want to detect
+whether such a variable has been set at all, you can initialize it to
+TRUE_UNSET. (BOOL variables are integers underneath, so can hold more than two
+values.)
+
+*opt_fixed*::
+This specifies a fixed point number, such as is used for load averages.
+The address should point to a variable of type `int`. The value is stored
+multiplied by 1000, so, for example, 1.4142 is truncated and stored as 1414.
+
+*opt_int*::
+This specifies an integer; the address should point to a variable of type
+`int`. The value may be specified in any of the integer formats accepted by
+Exim.
+
+*opt_mkint*::
+This is the same as %opt_int%, except that when such a value is output in a
+%-bP% listing, if it is an exact number of kilobytes or megabytes, it is
+printed with the suffix K or M.
+
+*opt_octint*::
+This also specifies an integer, but the value is always interpeted as an
+octal integer, whether or not it starts with the digit zero, and it is
+always output in octal.
+
+*opt_stringptr*::
+This specifies a string value; the address must be a pointer to a
+variable that points to a string (for example, of type `uschar \*`).
+
+*opt_time*::
+This specifies a time interval value. The address must point to a variable of
+type `int`. The value that is placed there is a number of seconds.
+
+///
+End of list
+///
+
+If the %-bP% command line option is followed by `local_scan`, Exim prints
+out the values of all the 'local_scan()' options.
+
+
+
+Available Exim variables
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['local_scan()' function,available Exim variables]
+The header _local_scan.h_ gives you access to a number of C variables. These
+are the only ones that are guaranteed to be maintained from release to release.
+Note, however, that you can obtain the value of any Exim variable by calling
+'expand_string()'. The exported variables are as follows:
+
+*unsigned~int~debug_selector*::
+This variable is set to zero when no debugging is taking place. Otherwise, it
+is a bitmap of debugging selectors. Two bits are identified for use in
+'local_scan()'; they are defined as macros:
++
+--
+- The `D_v` bit is set when %-v% was present on the command line. This is a
+testing option that is not privileged -- any caller may set it. All the
+other selector bits can be set only by admin users.
+
+- The `D_local_scan` bit is provided for use by 'local_scan()'; it is set
+by the `+local_scan` debug selector. It is not included in the default set
+of debugging bits.
+--
++
+Thus, to write to the debugging output only when `+local_scan` has been
+selected, you should use code like this:
+
+ if ((debug_selector & D_local_scan) != 0)
+ debug_printf("xxx", ...);
+
+
+*uschar~\*expand_string_message*::
+After a failing call to 'expand_string()' (returned value NULL), the
+variable %expand_string_message% contains the error message, zero-terminated.
+
+*header_line~\*header_list*::
+A pointer to a chain of header lines. The %header_line% structure is discussed
+below.
+
+*header_line~\*header_last*::
+A pointer to the last of the header lines.
+
+*uschar~\*headers_charset*::
+The value of the %headers_charset% configuration option.
+
+*BOOL~host_checking*::
+This variable is TRUE during a host checking session that is initiated by the
+%-bh% command line option.
+
+*uschar~\*interface_address*::
+The IP address of the interface that received the message, as a string. This
+is NULL for locally submitted messages.
+
+*int~interface_port*::
+The port on which this message was received.
+
+*uschar~\*message_id*::
+This variable contains the message id for the incoming message as a
+zero-terminated string.
+
+*uschar~\*received_protocol*::
+The name of the protocol by which the message was received.
+
+*int~recipients_count*::
+The number of accepted recipients.
+
+*recipient_item~\*recipients_list*::
+cindex:[recipient,adding in local scan]
+cindex:[recipient,removing in local scan]
+The list of accepted recipients, held in a vector of length %recipients_count%.
+The %recipient_item% structure is discussed below. You can add additional
+recipients by calling 'receive_add_recipient()' (see below). You can delete
+recipients by removing them from the vector and adusting the value in
+%recipients_count%. In particular, by setting %recipients_count% to zero you
+remove all recipients. If you then return the value `LOCAL_SCAN_ACCEPT`, the
+message is accepted, but immediately blackholed. To replace the recipients, set
+%recipients_count% to zero and then call 'receive_add_recipient()' as often as
+needed.
+
+*uschar~\*sender_address*::
+The envelope sender address. For bounce messages this is the empty string.
+
+*uschar~\*sender_host_address*::
+The IP address of the sending host, as a string. This is NULL for
+locally-submitted messages.
+
+*uschar~\*sender_host_authenticated*::
+The name of the authentication mechanism that was used, or NULL if the message
+was not received over an authenticated SMTP connection.
+
+*uschar~\*sender_host_name*::
+The name of the sending host, if known.
+
+*int~sender_host_port*::
+The port on the sending host.
+
+*BOOL~smtp_input*::
+This variable is TRUE for all SMTP input, including BSMTP.
+
+*BOOL~smtp_batched_input*::
+This variable is TRUE for BSMTP input.
+
+*int~store_pool*::
+The contents of this variable control which pool of memory is used for new
+requests. See section <<SECTmemhanloc>> for details.
+
+///
+End of list
+///
+
+
+
+Structure of header lines
+~~~~~~~~~~~~~~~~~~~~~~~~~
+The %header_line% structure contains the members listed below.
+You can add additional header lines by calling the 'header_add()' function
+(see below). You can cause header lines to be ignored (deleted) by setting
+their type to \*.
+
+
+*struct~header_line~\*next*::
+A pointer to the next header line, or NULL for the last line.
+
+*int~type*::
+A code identifying certain headers that Exim recognizes. The codes are printing
+characters, and are documented in chapter <<CHAPspool>> of this manual. Notice
+in particular that any header line whose type is \* is not transmitted with the
+message. This flagging is used for header lines that have been rewritten, or
+are to be removed (for example, 'Envelope-sender:' header lines.) Effectively,
+\* means ``deleted''.
+
+*int~slen*::
+The number of characters in the header line, including the terminating and any
+internal newlines.
+
+*uschar~\*text*::
+A pointer to the text of the header. It always ends with a newline, followed by
+a zero byte. Internal newlines are preserved.
+
+
+
+Structure of recipient items
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The %recipient_item% structure contains these members:
+
+*uschar~\*address*::
+This is a pointer to the recipient address as it was received.
+
+*int~pno*::
+This is used in later Exim processing when top level addresses are created by
+the %one_time% option. It is not relevant at the time 'local_scan()' is run and
+must always contain -1 at this stage.
+
+*uschar~\*errors_to*::
+If this value is not NULL, bounce messages caused by failing to deliver to the
+recipient are sent to the address it contains. In other words, it overrides the
+envelope sender for this one recipient. (Compare the %errors_to% generic router
+option.) If a 'local_scan()' function sets an %errors_to% field to an
+unqualified address, Exim qualifies it using the domain from
+%qualify_recipient%. When 'local_scan()' is called, the %errors_to% field is
+NULL for all recipients.
+
+
+
+Available Exim functions
+~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['local_scan()' function,available Exim functions]
+The header _local_scan.h_ gives you access to a number of Exim functions.
+These are the only ones that are guaranteed to be maintained from release to
+release:
+
+*pid_t~child_open(uschar~{star}{star}argv,~uschar~{star}{star}envp,~int~newumask,~int~{star}infdptr,~int~{star}outfdptr,~BOOL~make_leader)*::
+
+This function creates a child process that runs the command specified by
+%argv%. The environment for the process is specified by %envp%, which can be
+NULL if no environment variables are to be passed. A new umask is supplied for
+the process in %newumask%.
++
+Pipes to the standard input and output of the new process are set up
+and returned to the caller via the %infdptr% and %outfdptr% arguments. The
+standard error is cloned to the standard output. If there are any file
+descriptors ``in the way'' in the new process, they are closed. If the final
+argument is TRUE, the new process is made into a process group leader.
++
+The function returns the pid of the new process, or -1 if things go wrong.
+
+*int~child_close(pid_t~pid,~int~timeout)*::
+This function waits for a child process to terminate, or for a timeout (in
+seconds) to expire. A timeout value of zero means wait as long as it takes. The
+return value is as follows:
++
+- >= 0
++
+The process terminated by a normal exit and the value is the process ending
+status.
+
+- < 0 and > --256
++
+The process was terminated by a signal and the value is the negation of the
+signal number.
+
+- --256
++
+The process timed out.
+
+- --257
++
+The was some other error in wait(); %errno% is still set.
+
+
+*pid_t~child_open_exim(int~{star}fd)*::
+This function provide you with a means of submitting a new message to
+Exim. (Of course, you can also call _/usr/sbin/sendmail_ yourself if you
+want, but this packages it all up for you.) The function creates a pipe,
+forks a subprocess that is running
+
+ exim -t -oem -oi -f <>
++
+and returns to you (via the `int *` argument) a file descriptor for the pipe
+that is connected to the standard input. The yield of the function is the PID
+of the subprocess. You can then write a message to the file descriptor, with
+recipients in 'To:', 'Cc:', and/or 'Bcc:' header lines.
++
+When you have finished, call 'child_close()' to wait for the process to
+finish and to collect its ending status. A timeout value of zero is usually
+fine in this circumstance. Unless you have made a mistake with the recipient
+addresses, you should get a return code of zero.
+
+*void~debug_printf(char~{star},~...)*::
+This is Exim's debugging function, with arguments as for '(printf()'. The
+output is written to the standard error stream. If no debugging is selected,
+calls to 'debug_printf()' have no effect. Normally, you should make calls
+conditional on the `local_scan` debug selector by coding like this:
+
+ if ((debug_selector & D_local_scan) != 0)
+ debug_printf("xxx", ...);
+
+*uschar~{star}expand_string(uschar~{star}string)*::
+This is an interface to Exim's string expansion code. The return value is the
+expanded string, or NULL if there was an expansion failure.
+The C variable %expand_string_message% contains an error message after an
+expansion failure. If expansion does not change the string, the return value is
+the pointer to the input string. Otherwise, the return value points to a new
+block of memory that was obtained by a call to 'store_get()'. See section
+<<SECTmemhanloc>> below for a discussion of memory handling.
+
+*void~header_add(int~type,~char~{star}format,~...)*::
+This function allows you to an add additional header line at the end of the
+existing ones. The first argument is the type, and should normally be a space
+character. The second argument is a format string and any number of
+substitution arguments as for 'sprintf()'. You may include internal newlines if
+you want, and you must ensure that the string ends with a newline.
+
+*void~header_add_at_position(BOOL~after,~uschar~{star}name,~BOOL~topnot,~int~type,~char~{star}format,~...)*::
+This function adds a new header line at a specified point in the header
+chain. The header itself is specified as for 'header_add()'.
++
+If %name% is NULL, the new header is added at the end of the chain if %after%
+is true, or at the start if %after% is false. If %name% is not NULL, the header
+lines are searched for the first non-deleted header that matches the name. If
+one is found, the new header is added before it if %after% is false. If %after%
+is true, the new header is added after the found header and any adjacent
+subsequent ones with the same name (even if marked ``deleted''). If no matching
+non-deleted header is found, the %topnot% option controls where the header is
+added. If it is true, addition is at the top; otherwise at the bottom. Thus, to
+add a header after all the 'Received:' headers, or at the top if there are no
+'Received:' headers, you could use
+
+ header_add_at_position(TRUE, US"Received", TRUE,
+ ' ', "X-xxx: ...");
++
+Normally, there is always at least one non-deleted 'Received:' header, but
+there may not be if %received_header_text% expands to an empty string.
+
+
+*void~header_remove(int~occurrence,~uschar~{star}name)*::
+This function removes header lines. If %occurrence% is zero or negative, all
+occurrences of the header are removed. If occurrence is greater than zero, that
+particular instance of the header is removed. If no header(s) can be found that
+match the specification, the function does nothing.
+
+
+*BOOL~header_testname(header_line~{star}hdr,~uschar~{star}name,~int~length,~BOOL~notdel)*::
+This function tests whether the given header has the given name. It is not just
+a string comparison, because whitespace is permitted between the name and the
+colon. If the %notdel% argument is true, a false return is forced for all
+``deleted'' headers; otherwise they are not treated specially. For example:
+
+ if (header_testname(h, US"X-Spam", 6, TRUE)) ...
+
+
+*uschar~{star}lss_b64encode(uschar~{star}cleartext,~int~length)*::
+cindex:[base64 encoding,functions for 'local_scan()' use]
+This function base64-encodes a string, which is passed by address and length.
+The text may contain bytes of any value, including zero. The result is passed
+back in dynamic memory that is obtained by calling 'store_get()'. It is
+zero-terminated.
+
+*int~lss_b64decode(uschar~{star}codetext,~uschar~{star}{star}cleartext)*::
+This function decodes a base64-encoded string. Its arguments are a
+zero-terminated base64-encoded string and the address of a variable that is set
+to point to the result, which is in dynamic memory. The length of the decoded
+string is the yield of the function. If the input is invalid base64 data, the
+yield is -1. A zero byte is added to the end of the output string to make it
+easy to interpret as a C string (assuming it contains no zeros of its own). The
+added zero byte is not included in the returned count.
+
+*int~lss_match_domain(uschar~{star}domain,~uschar~{star}list)*::
+This function checks for a match in a domain list. Domains are always
+matched caselessly. The return value is one of the following:
++
+&&&
+`OK ` match succeeded
+`FAIL ` match failed
+`DEFER ` match deferred
+&&&
++
+DEFER is usually caused by some kind of lookup defer, such as the
+inability to contact a database.
+
+*int~lss_match_local_part(uschar~{star}localpart,~uschar~{star}list,~BOOL~caseless)*::
+This function checks for a match in a local part list. The third argument
+controls case-sensitivity. The return values are as for
+'lss_match_domain()'.
+
+*int~lss_match_address(uschar~{star}address,~uschar~{star}list,~BOOL~caseless)*::
+This function checks for a match in an address list. The third argument
+controls the case-sensitivity of the local part match. The domain is always
+matched caselessly. The return values are as for 'lss_match_domain()'.
+
+*int~lss_match_host(uschar~{star}host_name,~uschar~{star}host_address,~uschar~{star}list)*::
+This function checks for a match in a host list. The most common usage is
+expected to be
+
+ lss_match_host(sender_host_name, sender_host_address, ...)
++
+An empty address field matches an empty item in the host list. If the
+host name is NULL, the name corresponding to $sender_host_address$ is
+automatically looked up if a host name is required to match an item in the
+list. The return values are as for 'lss_match_domain()', but in addition,
+'lss_match_host()' returns ERROR in the case when it had to look up a host
+name, but the lookup failed.
+
+*void~log_write(unsigned~int~selector,~int~which,~char~{star}format,~...)*::
+This function writes to Exim's log files. The first argument should be zero (it
+is concerned with %log_selector%). The second argument can be `LOG_MAIN` or
+`LOG_REJECT` or `LOG_PANIC` or the inclusive ``or'' of any combination of them.
+It specifies to which log or logs the message is written. The remaining
+arguments are a format and relevant insertion arguments. The string should not
+contain any newlines, not even at the end.
+
+
+*void~receive_add_recipient(uschar~{star}address,~int~pno)*::
+This function adds an additional recipient to the message. The first argument
+is the recipient address. If it is unqualified (has no domain), it is qualified
+with the %qualify_recipient% domain. The second argument must always be -1.
++
+This function does not allow you to specify a private %errors_to% address (as
+described with the structure of %recipient_item% above), because it pre-dates
+the addition of that field to the structure. However, it is easy to add such a
+value afterwards. For example:
+
+ receive_add_recipient(US"monitor@mydom.example", -1);
+ recipients_list[recipients_count-1].errors_to =
+ US"postmaster@mydom.example";
+
+*BOOL~receive_remove_recipient(uschar~{star}recipient)*::
+This is a convenience function to remove a named recipient from the list of
+recipients. It returns true if a recipient was removed, and false if no
+matching recipient could be found. The argument must be a complete email
+address.
+
+
+*uschar~*rfc2047_decode(uschar~{star}string,~BOOL~lencheck,~uschar~{star}target,~int~zeroval,~int~{star}lenptr,~uschar~{star}{star}error)*::
+This function decodes strings that are encoded according to RFC 2047. Typically
+these are the contents of header lines. First, each encoded ``word'' is decoded
+from the Q or B encoding into a byte-string. Then, if provided with the name of
+a charset encoding, and if the 'iconv()' function is available, an attempt is
+made to translate the result to the named character set. If this fails, the
+binary string is returned with an error message.
++
+The first argument is the string to be decoded. If %lencheck% is TRUE, the
+maximum MIME word length is enforced. The third argument is the target
+encoding, or NULL if no translation is wanted.
++
+cindex:[binary zero,in RFC 2047 decoding]
+If a binary zero is encountered in the decoded string, it is replaced by the
+contents of the %zeroval% argument. For use with Exim headers, the value must
+not be 0 because header lines are handled as zero-terminated strings.
++
+The function returns the result of processing the string, zero-terminated; if
+%lenptr% is not NULL, the length of the result is set in the variable to which
+it points. When %zeroval% is 0, %lenptr% should not be NULL.
++
+If an error is encountered, the function returns NULL and uses the %error%
+argument to return an error message. The variable pointed to by %error% is set
+to NULL if there is no error; it may be set non-NULL even when the function
+returns a non-NULL value if decoding was successful, but there was a problem
+with translation.
+
+
+*int~smtp_fflush(void)*::
+This function is used in conjunction with 'smtp_printf()', as described
+below.
+
+*void~smtp_printf(char~{star},~...)*::
+The arguments of this function are like 'printf()'; it writes to the SMTP
+output stream. You should use this function only when there is an SMTP output
+stream, that is, when the incoming message is being received via interactive
+SMTP. This is the case when %smtp_input% is TRUE and %smtp_batched_input% is
+FALSE. If you want to test for an incoming message from another host (as
+opposed to a local process that used the %-bs% command line option), you can
+test the value of %sender_host_address%, which is non-NULL when a remote host
+is involved.
++
+If an SMTP TLS connection is established, 'smtp_printf()' uses the TLS
+output function, so it can be used for all forms of SMTP connection.
++
+Strings that are written by 'smtp_printf()' from within 'local_scan()'
+must start with an appropriate response code: 550 if you are going to return
+LOCAL_SCAN_REJECT, 451 if you are going to return
+LOCAL_SCAN_TEMPREJECT, and 250 otherwise. Because you are writing the
+initial lines of a multi-line response, the code must be followed by a hyphen
+to indicate that the line is not the final response line. You must also ensure
+that the lines you write terminate with CRLF. For example:
+
+ smtp_printf("550-this is some extra info\r\n");
+ return LOCAL_SCAN_REJECT;
++
+Note that you can also create multi-line responses by including newlines in
+the data returned via the %return_text% argument. The added value of using
+'smtp_printf()' is that, for instance, you could introduce delays between
+multiple output lines.
++
+The 'smtp_printf()' function does not return any error indication, because it
+does not automatically flush pending output, and therefore does not test
+the state of the stream. (In the main code of Exim, flushing and error
+detection is done when Exim is ready for the next SMTP input command.) If
+you want to flush the output and check for an error (for example, the
+dropping of a TCP/IP connection), you can call 'smtp_fflush()', which has no
+arguments. It flushes the output stream, and returns a non-zero value if there
+is an error.
+
+*void~{star}store_get(int)*::
+This function accesses Exim's internal store (memory) manager. It gets a new
+chunk of memory whose size is given by the argument. Exim bombs out if it ever
+runs out of memory. See the next section for a discussion of memory handling.
+
+*void~{star}store_get_perm(int)*::
+This function is like 'store_get()', but it always gets memory from the
+permanent pool. See the next section for a discussion of memory handling.
+
+*uschar~{star}string_copy(uschar~{star}string)*::
+See below.
+
+*uschar~{star}string_copyn(uschar~{star}string,~int~length)*::
+See below.
+
+*uschar~{star}string_sprintf(char~{star}format,~...)*::
+These three functions create strings using Exim's dynamic memory facilities.
+The first makes a copy of an entire string. The second copies up to a maximum
+number of characters, indicated by the second argument. The third uses a format
+and insertion arguments to create a new string. In each case, the result is a
+pointer to a new string in the current memory pool. See the next section for
+more discussion.
+
+///
+End of list
+///
+
+
+
+
+[[SECTmemhanloc]]
+More about Exim's memory handling
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['local_scan()' function,memory handling]
+No function is provided for freeing memory, because that is never needed.
+The dynamic memory that Exim uses when receiving a message is automatically
+recycled if another message is received by the same process (this applies only
+to incoming SMTP connections -- other input methods can supply only one message
+at a time). After receiving the last message, a reception process terminates.
+
+Because it is recycled, the normal dynamic memory cannot be used for holding
+data that must be preserved over a number of incoming messages on the same SMTP
+connection. However, Exim in fact uses two pools of dynamic memory; the second
+one is not recycled, and can be used for this purpose.
+
+If you want to allocate memory that remains available for subsequent messages
+in the same SMTP connection, you should set
+
+ store_pool = POOL_PERM
+
+before calling the function that does the allocation. There is no need to
+restore the value if you do not need to; however, if you do want to revert to
+the normal pool, you can either restore the previous value of %store_pool% or
+set it explicitly to POOL_MAIN.
+
+The pool setting applies to all functions that get dynamic memory, including
+'expand_string()', 'store_get()', and the 'string_xxx()' functions.
+There is also a convenience function called 'store_get_perm()' that gets a
+block of memory from the permanent pool while preserving the value of
+%store_pool%.
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPsystemfilter]]
+System-wide message filtering
+-----------------------------
+cindex:[filter,system filter]
+cindex:[filtering all mail]
+cindex:[system filter]
+The previous chapters (on ACLs and the local scan function) describe checks
+that can be applied to messages before they are accepted by a host. There is
+also a mechanism for checking messages once they have been received, but before
+they are delivered. This is called the 'system filter'.
+
+The system filter operates in a similar manner to users' filter files, but it
+is run just once per message (however many recipients the message has).
+It should not normally be used as a substitute for routing, because %deliver%
+commands in a system router provide new envelope recipient addresses.
+The system filter must be an Exim filter. It cannot be a Sieve filter.
+
+The system filter is run at the start of a delivery attempt, before any routing
+is done. If a message fails to be completely delivered at the first attempt,
+the system filter is run again at the start of every retry.
+If you want your filter to do something only once per message, you can make use
+of the %first_delivery% condition in an %if% command in the filter to prevent
+it happening on retries.
+
+*Warning*: Because the system filter runs just once, variables that are
+specific to individual recipient addresses, such as $local_part$ and
+$domain$, are not set, and the ``personal'' condition is not meaningful. If you
+want to run a centrally-specified filter for each recipient address
+independently, you can do so by setting up a suitable ^redirect^ router, as
+described in section <<SECTperaddfil>> below.
+
+
+Specifying a system filter
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[uid (user id),system filter]
+cindex:[gid (group id),system filter]
+The name of the file that contains the system filter must be specified by
+setting %system_filter%. If you want the filter to run under a uid and gid
+other than root, you must also set %system_filter_user% and
+%system_filter_group% as appropriate. For example:
+
+ system_filter = /etc/mail/exim.filter
+ system_filter_user = exim
+
+If a system filter generates any deliveries directly to files or pipes (via the
+%save% or %pipe% commands), transports to handle these deliveries must be
+specified by setting %system_filter_file_transport% and
+%system_filter_pipe_transport%, respectively. Similarly,
+%system_filter_reply_transport% must be set to handle any messages generated
+by the %reply% command.
+
+
+Testing a system filter
+~~~~~~~~~~~~~~~~~~~~~~~
+You can run simple tests of a system filter in the same way as for a user
+filter, but you should use %-bF% rather than %-bf%, so that features that
+are permitted only in system filters are recognized.
+
+If you want to test the combined effect of a system filter and a user filter,
+you can use both %-bF% and %-bf% on the same command line.
+
+
+
+Contents of a system filter
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The language used to specify system filters is the same as for users' filter
+files. It is described in the separate end-user document 'Exim's interface to
+mail filtering'. However, there are some additional features that are
+available only in system filters; these are described in subsequent sections.
+If they are encountered in a user's filter file or when testing with %-bf%,
+they cause errors.
+
+cindex:[frozen messages,manual thaw; testing in filter]
+There are two special conditions which, though available in users' filter
+files, are designed for use in system filters. The condition %first_delivery%
+is true only for the first attempt at delivering a message, and
+%manually_thawed% is true only if the message has been frozen, and
+subsequently thawed by an admin user. An explicit forced delivery counts as a
+manual thaw, but thawing as a result of the %auto_thaw% setting does not.
+
+*Warning*: If a system filter uses the %first_delivery% condition to
+specify an ``unseen'' (non-significant) delivery, and that delivery does not
+succeed, it will not be tried again.
+If you want Exim to retry an unseen delivery until it succeeds, you should
+arrange to set it up every time the filter runs.
+
+When a system filter finishes running, the values of the variables $n0$ --
+$n9$ are copied into $sn0$ -- $sn9$ and are thereby made available to
+users' filter files. Thus a system filter can, for example, set up ``scores'' to
+which users' filter files can refer.
+
+
+
+Additional variable for system filters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The expansion variable $recipients$, containing a list of all the recipients
+of the message (separated by commas and white space), is available in system
+filters. It is not available in users' filters for privacy reasons.
+
+
+
+Defer, freeze, and fail commands for system filters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[freezing messages]
+cindex:[message,freezing]
+cindex:[message,forced failure]
+cindex:[%fail%,in system filter]
+cindex:[%freeze% in system filter]
+cindex:[%defer% in system filter]
+There are three extra commands (%defer%, %freeze% and %fail%) which are always
+available in system filters, but are not normally enabled in users' filters.
+(See the %allow_defer%,
+%allow_freeze% and %allow_fail% options for the ^redirect^ router.) These
+commands can optionally be followed by the word %text% and a string containing
+an error message, for example:
+
+ fail text "this message looks like spam to me"
+
+The keyword %text% is optional if the next character is a double quote.
+
+The %defer% command defers delivery of the original recipients of the message.
+The %fail% command causes all the original recipients to be failed, and a
+bounce message to be created. The %freeze% command suspends all delivery
+attempts for the original recipients. In all cases, any new deliveries that are
+specified by the filter are attempted as normal after the filter has run.
+
+The %freeze% command is ignored if the message has been manually unfrozen and
+not manually frozen since. This means that automatic freezing by a system
+filter can be used as a way of checking out suspicious messages. If a message
+is found to be all right, manually unfreezing it allows it to be delivered.
+
+cindex:[log,%fail% command log line]
+cindex:[%fail%,log line; reducing]
+The text given with a fail command is used as part of the bounce message as
+well as being written to the log. If the message is quite long, this can fill
+up a lot of log space when such failures are common. To reduce the size of the
+log message, Exim interprets the text in a special way if it starts with the
+two characters `<<` and contains `>>` later. The text between these two
+strings is written to the log, and the rest of the text is used in the bounce
+message. For example:
+
+....
+fail "<<filter test 1>>Your message is rejected \
+ because it contains attachments that we are \
+ not prepared to receive."
+....
+
+
+cindex:[loop,caused by %fail%]
+Take great care with the %fail% command when basing the decision to fail on the
+contents of the message, because the bounce message will of course include the
+contents of the original message and will therefore trigger the %fail% command
+again (causing a mail loop) unless steps are taken to prevent this. Testing the
+%error_message% condition is one way to prevent this. You could use, for
+example
+
+ if $message_body contains "this is spam" and not error_message
+ then fail text "spam is not wanted here" endif
+
+though of course that might let through unwanted bounce messages. The
+alternative is clever checking of the body and/or headers to detect bounces
+generated by the filter.
+
+The interpretation of a system filter file ceases after a
+%defer%,
+%freeze%, or %fail% command is obeyed. However, any deliveries that were set up
+earlier in the filter file are honoured, so you can use a sequence such as
+
+ mail ...
+ freeze
+
+to send a specified message when the system filter is freezing (or deferring or
+failing) a message. The normal deliveries for the message do not, of course,
+take place.
+
+
+
+[[SECTaddremheasys]]
+Adding and removing headers in a system filter
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[header lines,adding; in system filter]
+cindex:[header lines,removing; in system filter]
+cindex:[filter,header lines; adding/removing]
+Two filter commands that are available only in system filters are:
+
+ headers add <string>
+ headers remove <string>
+
+The argument for the %headers add% is a string that is expanded and then added
+to the end of the message's headers. It is the responsibility of the filter
+maintainer to make sure it conforms to RFC 2822 syntax. Leading white space is
+ignored, and if the string is otherwise empty, or if the expansion is forced to
+fail, the command has no effect.
+
+You can use ``\n'' within the string, followed by white space, to specify
+continued header lines. More than one header may be added in one command by
+including ``\n'' within the string without any following white space. For
+example:
+
+....
+headers add "X-header-1: ....\n \
+ continuation of X-header-1 ...\n\
+ X-header-2: ...."
+....
+
+Note that the header line continuation white space after the first newline must
+be placed before the backslash that continues the input string, because white
+space after input continuations is ignored.
+
+The argument for %headers remove% is a colon-separated list of header names.
+This command applies only to those headers that are stored with the message;
+those that are added at delivery time (such as 'Envelope-To:' and
+'Return-Path:') cannot be removed by this means. If there is more than one
+header with the same name, they are all removed.
+
+The %headers% command in a system filter makes an immediate change to the set
+of header lines that was received with the message (with possible additions
+from ACL processing). Subsequent commands in the system filter operate on the
+modified set, which also forms the basis for subsequent message delivery.
+Unless further modified during routing or transporting, this set of headers is
+used for all recipients of the message.
+
+During routing and transporting, the variables that refer to the contents of
+header lines refer only to those lines that are in this set. Thus, header lines
+that are added by a system filter are visible to users' filter files and to all
+routers and transports. This contrasts with the manipulation of header lines by
+routers and transports, which is not immediate, but which instead is saved up
+until the message is actually being written (see section <<SECTheadersaddrem>>).
+
+If the message is not delivered at the first attempt, header lines that were
+added by the system filter are stored with the message, and so are still
+present at the next delivery attempt. Header lines that were removed are still
+present, but marked ``deleted'' so that they are not transported with the
+message. For this reason, it is usual to make the %headers% command conditional
+on %first_delivery% so that the set of header lines is not modified more than
+once.
+
+Because header modification in a system filter acts immediately, you have to
+use an indirect approach if you want to modify the contents of a header line.
+For example:
+
+ headers add "Old-Subject: $h_subject:"
+ headers remove "Subject"
+ headers add "Subject: new subject (was: $h_old-subject:)"
+ headers remove "Old-Subject"
+
+
+
+
+
+Setting an errors address in a system filter
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[envelope sender]
+In a system filter, if a %deliver% command is followed by
+
+ errors_to <some address>
+
+in order to change the envelope sender (and hence the error reporting) for that
+delivery, any address may be specified. (In a user filter, only the current
+user's address can be set.) For example, if some mail is being monitored, you
+might use
+
+ unseen deliver monitor@spying.example errors_to root@local.example
+
+to take a copy which would not be sent back to the normal error reporting
+address if its delivery failed.
+
+
+
+[[SECTperaddfil]]
+Per-address filtering
+~~~~~~~~~~~~~~~~~~~~~
+In contrast to the system filter, which is run just once per message for each
+delivery attempt, it is also possible to set up a system-wide filtering
+operation that runs once for each recipient address. In this case, variables
+such as $local_part$ and $domain$ can be used, and indeed, the choice of
+filter file could be made dependent on them. This is an example of a router
+which implements such a filter:
+
+ central_filter:
+ check_local_user
+ driver = redirect
+ domains = +local_domains
+ file = /central/filters/$local_part
+ no_verify
+ allow_filter
+ allow_freeze
+
+The filter is run in a separate process under its own uid. Therefore, either
+%check_local_user% must be set (as above), in which case the filter is run as
+the local user, or the %user% option must be used to specify which user to use.
+If both are set, %user% overrides.
+
+Care should be taken to ensure that none of the commands in the filter file
+specify a significant delivery if the message is to go on to be delivered to
+its intended recipient. The router will not then claim to have dealt with the
+address, so it will be passed on to subsequent routers to be delivered in the
+normal way.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPmsgproc]]
+Message processing
+------------------
+cindex:[message,general processing]
+Exim performs various transformations on the sender and recipient addresses of
+all messages that it handles, and also on the messages' header lines. Some of
+these are optional and configurable, while others always take place. All of
+this processing, except rewriting as a result of routing, and the addition or
+removal of header lines while delivering, happens when a message is received,
+before it is placed on Exim's queue.
+
+Some of the automatic processing takes place by default only for
+``locally-originated'' messages. This adjective is used to describe messages that
+are not received over TCP/IP, but instead are passed to an Exim process on its
+standard input. This includes the interactive ``local SMTP'' case that is set up
+by the %-bs% command line option.
+
+*Note*: messages received over TCP/IP on the loopback interface (127.0.0.1
+or ::1) are not considered to be locally-originated. Exim does not treat the
+loopback interface specially in any way.
+
+If you want the loopback interface to be treated specially, you must ensure
+that there are appropriate entries in your ACLs.
+
+
+
+
+[[SECTsubmodnon]]
+Submission mode for non-local messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[message,submission]
+cindex:[submission mode]
+Processing that happens automatically for locally-originated messages can also
+be requested for other messages. The term ``submission mode'' is used to describe
+this state. Submisssion mode is set by the modifier
+
+ control = submission
+
+in a MAIL, RCPT, or pre-data ACL for an incoming SMTP message (see
+sections <<SECTACLmodi>> and <<SECTcontrols>>). This makes Exim treat the message
+as a local submission, and is normally used when the source of the message is
+known to be an MUA running on a client host (as opposed to an MTA). For
+example, to set submission mode for messages originating on the IPv4 loopback
+interface, you could include the following in the MAIL ACL:
+
+ warn hosts = 127.0.0.1
+ control = submission
+
+There are some options that can be used when setting submission mode. A slash
+is used to separate options. For example:
+
+ control = submission/sender_retain
+
+Specifying %sender_retain% has the effect of setting %local_sender_retain%
+true and %local_from_check% false for the current incoming message. The first
+of these allows an existing 'Sender:' header in the message to remain, and the
+second suppresses the check to ensure that 'From:' matches the authenticated
+sender. With this setting, Exim still fixes up messages by adding 'Date:' and
+'Message-ID:' header lines if they are missing, but makes no attempt to check
+sender authenticity in header lines.
+
+A submission mode setting may also specify a domain to be used when generating
+a 'From:' or 'Sender:' header. For example:
+
+ control = submission/domain=some.domain
+
+The domain may be empty. How this value is used is described in sections
+<<SECTthefrohea>> and <<SECTthesenhea>>.
+
+
+
+
+
+[[SECTlineendings]]
+Line endings
+~~~~~~~~~~~~
+cindex:[line endings]
+cindex:[carriage return]
+cindex:[linefeed]
+RFC 2821 specifies that CRLF (two characters: carriage-return, followed by
+linefeed) is the line ending for messages transmitted over the Internet using
+SMTP over TCP/IP. However, within individual operating systems, different
+conventions are used. For example, Unix-like systems use just LF, but others
+use CRLF or just CR.
+
+Exim was designed for Unix-like systems, and internally, it stores messages
+using the system's convention of a single LF as a line terminator. When
+receiving a message, all line endings are translated to this standard format.
+Originally, it was thought that programs that passed messages directly to an
+MTA within an operating system would use that system's convention. Experience
+has shown that this is not the case; for example, there are Unix applications
+that use CRLF in this circumstance. For this reason, and for compatibility with
+other MTAs, the way Exim handles line endings for all messages is now as
+follows:
+
+- LF not preceded by CR is treated as a line ending.
+
+- CR is treated as a line ending; if it is immediately followed by LF, the LF
+is ignored.
+
+- The sequence ``CR, dot, CR'' does not terminate an incoming SMTP message,
+nor a local message in the state where a line containing only a dot is a
+terminator.
+
+- If a bare CR is encountered within a header line, an extra space is added after
+the line terminator so as not to end the header line. The reasoning behind this
+is that bare CRs in header lines are most likely either to be mistakes, or
+people trying to play silly games.
+
+- If the first header line received in a message ends with CRLF, a subsequent
+bare LF in a header line is treated in the same way as a bare CR in a header
+line.
+
+
+
+
+
+Unqualified addresses
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[unqualified addresses]
+cindex:[address,qualification]
+By default, Exim expects every envelope address it receives from an external
+host to be fully qualified. Unqualified addresses cause negative responses to
+SMTP commands. However, because SMTP is used as a means of transporting
+messages from MUAs running on personal workstations, there is sometimes a
+requirement to accept unqualified addresses from specific hosts or IP networks.
+
+Exim has two options that separately control which hosts may send unqualified
+sender or receipient addresses in SMTP commands, namely
+%sender_unqualified_hosts% and %recipient_unqualified_hosts%. In both
+cases, if an unqualified address is accepted, it is qualified by adding the
+value of %qualify_domain% or %qualify_recipient%, as appropriate.
+
+cindex:[%qualify_domain%]
+cindex:[%qualify_recipient%]
+Unqualified addresses in header lines are automatically qualified for messages
+that are locally originated, unless the %-bnq% option is given on the command
+line. For messages received over SMTP, unqualified addresses in header lines
+are qualified only if unqualified addresses are permitted in SMTP commands. In
+other words, such qualification is also controlled by
+%sender_unqualified_hosts% and %recipient_unqualified_hosts%,
+
+
+
+
+The UUCP From line
+~~~~~~~~~~~~~~~~~~
+cindex:[``From'' line]
+cindex:[UUCP,``From'' line]
+cindex:[sender,address]
+cindex:[%uucp_from_pattern%]
+cindex:[%uucp_from_sender%]
+cindex:[envelope sender]
+cindex:[Sendmail compatibility,``From'' line]
+Messages that have come from UUCP (and some other applications) often begin
+with a line containing the envelope sender and a timestamp, following the word
+``From''. Examples of two common formats are:
+
+ From a.oakley@berlin.mus Fri Jan 5 12:35 GMT 1996
+ From f.butler@berlin.mus Fri, 7 Jan 97 14:00:00 GMT
+
+This line precedes the RFC 2822 header lines. For compatibility with Sendmail,
+Exim recognizes such lines at the start of messages that are submitted to it
+via the command line (that is, on the standard input). It does not recognize
+such lines in incoming SMTP messages, unless the sending host matches
+%ignore_fromline_hosts% or the %-bs% option was used for a local message and
+%ignore_fromline_local% is set. The recognition is controlled by a regular
+expression that is defined by the %uucp_from_pattern% option, whose default
+value matches the two common cases shown above and puts the address that
+follows ``From'' into $1$.
+
+cindex:[numerical variables ($1$ $2$ etc),in ``From '' line handling]
+When the caller of Exim for a non-SMTP message that contains a ``From'' line is a
+trusted user, the message's sender address is constructed by expanding the
+contents of %uucp_sender_address%, whose default value is ``\$1''. This is then
+parsed as an RFC 2822 address. If there is no domain, the local part is
+qualified with %qualify_domain% unless it is the empty string. However, if the
+command line %-f% option is used, it overrides the ``From'' line.
+
+If the caller of Exim is not trusted, the ``From'' line is recognized, but the
+sender address is not changed. This is also the case for incoming SMTP messages
+that are permitted to contain ``From'' lines.
+
+Only one ``From'' line is recognized. If there is more than one, the second is
+treated as a data line that starts the body of the message, as it is not valid
+as a header line. This also happens if a ``From'' line is present in an incoming
+SMTP message from a source that is not permitted to send them.
+
+
+
+Resent- header lines
+~~~~~~~~~~~~~~~~~~~~
+cindex:[%Resent-% header lines]
+RFC 2822 makes provision for sets of header lines starting with the string
+`Resent-` to be added to a message when it is resent by the original
+recipient to somebody else. These headers are 'Resent-Date:', 'Resent-From:',
+'Resent-Sender:', 'Resent-To:', 'Resent-Cc:', 'Resent-Bcc:' and
+'Resent-Message-ID:'. The RFC says:
+
+'Resent fields are strictly informational. They MUST NOT be used in the normal
+processing of replies or other such automatic actions on messages.'
+
+This leaves things a bit vague as far as other processing actions such as
+address rewriting are concerned. Exim treats %Resent-% header lines as
+follows:
+
+- A 'Resent-From:' line that just contains the login id of the submitting user
+is automatically rewritten in the same way as 'From:' (see below).
+
+- If there's a rewriting rule for a particular header line, it is also applied to
+%Resent-% header lines of the same type. For example, a rule that rewrites
+'From:' also rewrites 'Resent-From:'.
+
+- For local messages, if 'Sender:' is removed on input, 'Resent-Sender:' is also
+removed.
+
+- For a locally-submitted message,
+if there are any %Resent-% header lines but no 'Resent-Date:',
+'Resent-From:', or 'Resent-Message-Id:', they are added as necessary. It is
+the contents of 'Resent-Message-Id:' (rather than 'Message-Id:') which are
+included in log lines in this case.
+
+- The logic for adding 'Sender:' is duplicated for 'Resent-Sender:' when any
+%Resent-% header lines are present.
+
+
+
+
+The Auto-Submitted: header line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Whenever Exim generates a bounce or a delay warning message, it includes the
+header line
+
+ Auto-Submitted: auto-generated
+
+
+
+
+The Bcc: header line
+~~~~~~~~~~~~~~~~~~~~
+cindex:['Bcc:' header line]
+If Exim is called with the %-t% option, to take recipient addresses from a
+message's header, it removes any 'Bcc:' header line that may exist (after
+extracting its addresses). If %-t% is not present on the command line, any
+existing 'Bcc:' is not removed.
+
+
+The Date: header line
+~~~~~~~~~~~~~~~~~~~~~
+cindex:['Date:' header line]
+If a locally-generated
+or submission-mode
+message has no 'Date:' header line, Exim adds one, using the current date and
+time.
+
+
+The Delivery-date: header line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['Delivery-date:' header line]
+cindex:[%delivery_date_remove%]
+'Delivery-date:' header lines are not part of the standard RFC 2822 header
+set. Exim can be configured to add them to the final delivery of messages. (See
+the generic %delivery_date_add% transport option.) They should not be present
+in messages in transit. If the %delivery_date_remove% configuration option is
+set (the default), Exim removes 'Delivery-date:' header lines from incoming
+messages.
+
+
+The Envelope-to: header line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['Envelope-to:' header line]
+cindex:[%envelope_to_remove%]
+'Envelope-to:' header lines are not part of the standard RFC 2822 header set.
+Exim can be configured to add them to the final delivery of messages. (See the
+generic %envelope_to_add% transport option.) They should not be present in
+messages in transit. If the %envelope_to_remove% configuration option is set
+(the default), Exim removes 'Envelope-to:' header lines from incoming
+messages.
+
+
+[[SECTthefrohea]]
+The From: header line
+~~~~~~~~~~~~~~~~~~~~~
+cindex:['From:' header line]
+cindex:[Sendmail compatibility,``From'' line]
+cindex:[message,submission]
+cindex:[submission mode]
+If a submission-mode message does not contain a 'From:' header line, Exim adds
+one if either of the following conditions is true:
+
+- The envelope sender address is not empty (that is, this is not a bounce
+message). The added header line copies the envelope sender address.
+
+- The SMTP session is authenticated and $authenticated_id$ is not empty.
+
+.. If no domain is specified by the submission control, the local part is
+$authenticated_id$ and the domain is $qualify_domain$.
+
+.. If a non-empty domain is specified by the submission control, the local
+part is $authenticated_id$, and the the domain is the specified domain.
+
+.. If an empty domain is specified by the submission control,
+$authenticated_id$ is assumed to be the complete address.
+
+A non-empty envelope sender takes precedence.
+
+If a locally-generated incoming message does not contain a 'From:' header
+line, Exim adds one containing the sender's address. The calling user's login
+name and full name are used to construct the address, as described in section
+<<SECTconstr>>. They are obtained from the password data by calling
+'getpwuid()' (but see the %unknown_login% configuration option). The address
+is qualified with %qualify_domain%.
+
+For compatibility with Sendmail, if an incoming, non-SMTP message has a
+'From:' header line containing just the unqualified login name of the calling
+user, this is replaced by an address containing the user's login name and full
+name as described in section <<SECTconstr>>.
+
+
+The Message-ID: header line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['Message-ID:' header line]
+cindex:[message,submission]
+If a locally-generated or submission-mode incoming message does not contain a
+'Message-ID:' or 'Resent-Message-ID:' header line, Exim adds one to the
+message. If there are any 'Resent-:' headers in the message, it creates
+'Resent-Message-ID:'. The id is constructed from Exim's internal message id,
+preceded by the letter E to ensure it starts with a letter, and followed by @
+and the primary host name. Additional information can be included in this
+header line by setting the
+cindex:[%message_id_header_text%]
+%message_id_header_text% and/or %message_id_header_domain% options.
+
+
+
+The Received: header line
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['Received:' header line]
+A 'Received:' header line is added at the start of every message. The contents
+are defined by the %received_header_text% configuration option, and Exim
+automatically adds a semicolon and a timestamp to the configured string.
+
+The 'Received:' header is generated as soon as the message's header lines have
+been received. At this stage, the timestamp in the 'Received:' header line is
+the time that the message started to be received. This is the value that is
+seen by the DATA ACL and by the 'local_scan()' function.
+
+Once a message is accepted, the timestamp in the 'Received:' header line is
+changed to the time of acceptance, which is (apart from a small delay while the
+-H spool file is written) the earliest time at which delivery could start.
+
+
+
+The Return-path: header line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['Return-path:' header line]
+cindex:[%return_path_remove%]
+'Return-path:' header lines are defined as something an MTA may insert when
+it does the final delivery of messages. (See the generic %return_path_add%
+transport option.) Therefore, they should not be present in messages in
+transit. If the %return_path_remove% configuration option is set (the
+default), Exim removes 'Return-path:' header lines from incoming messages.
+
+
+
+[[SECTthesenhea]]
+The Sender: header line
+~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['Sender:' header line]
+cindex:[message,submission]
+For a locally-originated message from an untrusted user, Exim may remove an
+existing 'Sender:' header line, and it may add a new one. You can modify these
+actions by setting %local_sender_retain% true or %local_from_check% false.
+
+When a local message is received from an untrusted user and
+%local_from_check% is true (the default), a check is made to see if the
+address given in the 'From:' header line is the correct (local) sender of the
+message. The address that is expected has the login name as the local part and
+the value of %qualify_domain% as the domain. Prefixes and suffixes for the
+local part can be permitted by setting %local_from_prefix% and
+%local_from_suffix% appropriately. If 'From:' does not contain the correct
+sender, a 'Sender:' line is added to the message.
+
+If you set %local_from_check% false, this checking does not occur. However,
+the removal of an existing 'Sender:' line still happens, unless you also set
+%local_sender_retain% to be true. It is not possible to set both of these
+options true at the same time.
+
+cindex:[submission mode]
+By default, no processing of 'Sender:' header lines is done for messages
+received over TCP/IP or for messages submitted by trusted users. However, when
+a message is received over TCP/IP in submission mode, and %sender_retain% is
+not specified on the submission control, the following processing takes place:
+
+First, any existing 'Sender:' lines are removed. Then, if the SMTP session is
+authenticated, and $authenticated_id$ is not empty, a sender address is
+created as follows:
+
+- If no domain is specified by the submission control, the local part is
+$authenticated_id$ and the domain is $qualify_domain$.
+
+- If a non-empty domain is specified by the submission control, the local part is
+$authenticated_id$, and the the domain is the specified domain.
+
+- If an empty domain is specified by the submission control,
+$authenticated_id$ is assumed to be the complete address.
+
+This address is compared with the address in the 'From:' header line. If they
+are different, a 'Sender:' header line containing the created address is
+added. Prefixes and suffixes for the local part in 'From:' can be permitted by
+setting %local_from_prefix% and %local_from_suffix% appropriately.
+
+
+
+
+[[SECTheadersaddrem]]
+Adding and removing header lines in routers and transports
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[header lines,adding; in router or transport]
+cindex:[header lines,removing; in router or transport]
+When a message is delivered, the addition and removal of header lines can be
+specified in a system filter, or on any of the routers and transports that
+process the message. Section <<SECTaddremheasys>> contains details about
+modifying headers in a system filter.
+
+In contrast to what happens in a system filter, header modifications that are
+specified on routers and transports apply only to the particular recipient
+addresses that are being processed by those routers and transports. These
+changes do not actually take place until a copy of the message is being
+transported. Therefore, they do not affect the basic set of header lines, and
+they do not affect the values of the variables that refer to header lines.
+
+For both routers and transports, the result of expanding a %headers_add%
+option must be in the form of one or more RFC 2822 header lines, separated by
+newlines (coded as ``\n''). For example:
+
+....
+headers_add = X-added-header: added by $primary_hostname\n\
+ X-added-second: another added header line
+....
+
+Exim does not check the syntax of these added header lines.
+
+The result of expanding %headers_remove% must consist of a colon-separated
+list of header names. This is confusing, because header names themselves are
+often terminated by colons. In this case, the colons are the list separators,
+not part of the names. For example:
+
+ headers_remove = return-receipt-to:acknowledge-to
+
+When %headers_add% or %headers_remove% is specified on a router, its value is
+expanded at routing time, and then associated with all addresses that are
+accepted by that router, and also with any new addresses that it generates. If
+an address passes through several routers as a result of aliasing or
+forwarding, the changes are cumulative.
+
+cindex:[%unseen% option]
+However, this does not apply to multiple routers that result from the use of
+the %unseen% option. Any header modifications that were specified by the
+``unseen'' router or its predecessors apply only to the ``unseen'' delivery.
+
+Addresses that end up with different %headers_add% or %headers_remove%
+settings cannot be delivered together in a batch, so a transport is always
+dealing with a set of addresses that have the same header-processing
+requirements.
+
+The transport starts by writing the original set of header lines that arrived
+with the message, possibly modified by the system filter. As it writes out
+these lines, it consults the list of header names that were attached to the
+recipient address(es) by %headers_remove% options in routers, and it also
+consults the transport's own %headers_remove% option. Header lines whose names
+are on either of these lists are not written out. If there are multiple
+instances of any listed header, they are all skipped.
+
+After the remaining original header lines have been written, new header
+lines that were specified by routers' %headers_add% options are written, in
+the order in which they were attached to the address. These are followed by any
+header lines specified by the transport's %headers_add% option.
+
+This way of handling header line modifications in routers and transports has
+the following consequences:
+
+- The original set of header lines, possibly modified by the system filter,
+remains ``visible'', in the sense that the $header_$'xxx' variables refer to
+it, at all times.
+
+- Header lines that are added by a router's
+%headers_add% option are not accessible by means of the $header_$'xxx'
+expansion syntax in subsequent routers or the transport.
+
+- Conversely, header lines that are specified for removal by %headers_remove% in
+a router remain visible to subsequent routers and the transport.
+
+- Headers added to an address by %headers_add% in a router cannot be removed by
+a later router or by a transport.
+
+- An added header can refer to the contents of an original header that is to be
+removed, even it has the same name as the added header. For example:
+
+ headers_remove = subject
+ headers_add = Subject: new subject (was: $h_subject:)
+
+
+*Warning*: The %headers_add% and %headers_remove% options cannot be used
+for a ^redirect^ router that has the %one_time% option set.
+
+
+
+
+
+[[SECTconstr]]
+Constructed addresses
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[address,constructed]
+cindex:[constructed address]
+When Exim constructs a sender address for a locally-generated message, it uses
+the form
+
+ <user name> <<login>@<qualify_domain>>
+
+For example:
+
+ Zaphod Beeblebrox <zaphod@end.univ.example>
+
+The user name is obtained from the %-F% command line option if set, or
+otherwise by looking up the calling user by 'getpwuid()' and extracting the
+``gecos'' field from the password entry. If the ``gecos'' field contains an
+ampersand character, this is replaced by the login name with the first letter
+upper cased, as is conventional in a number of operating systems. See the
+%gecos_name% option for a way to tailor the handling of the ``gecos'' field. The
+%unknown_username% option can be used to specify user names in cases when
+there is no password file entry.
+
+In all cases, the user name is made to conform to RFC 2822 by quoting all or
+parts of it if necessary. In addition, if it contains any non-printing
+characters, it is encoded as described in RFC 2047, which defines a way of
+including non-ASCII characters in header lines.
+The value of the %headers_charset% option specifies the name of the encoding
+that is used (the characters are assumed to be in this encoding).
+The setting of %print_topbitchars% controls whether characters with the top
+bit set (that is, with codes greater than 127) count as printing characters or
+not.
+
+
+
+Case of local parts
+~~~~~~~~~~~~~~~~~~~
+cindex:[case of local parts]
+cindex:[local part,case of]
+RFC 2822 states that the case of letters in the local parts of addresses cannot
+be assumed to be non-significant. Exim preserves the case of local parts of
+addresses, but by default it uses a lower-cased form when it is routing,
+because on most Unix systems, usernames are in lower case and case-insensitive
+routing is required. However, any particular router can be made to use the
+original case for local parts by setting the %caseful_local_part% generic
+router option.
+
+cindex:[mixed-case login names]
+If you must have mixed-case user names on your system, the best way to proceed,
+assuming you want case-independent handling of incoming email, is to set up
+your first router to convert incoming local parts in your domains to the
+correct case by means of a file lookup. For example:
+
+....
+correct_case:
+ driver = redirect
+ domains = +local_domains
+ data = ${lookup{$local_part}cdb\
+ {/etc/usercased.cdb}{$value}fail}\
+ @$domain
+....
+
+For this router, the local part is forced to lower case by the default action
+(%caseful_local_part% is not set). The lower-cased local part is used to look
+up a new local part in the correct case. If you then set %caseful_local_part%
+on any subsequent routers which process your domains, they will operate on
+local parts with the correct case in a case-sensitive manner.
+
+
+
+Dots in local parts
+~~~~~~~~~~~~~~~~~~~
+cindex:[dot,in local part]
+cindex:[local part,dots in]
+RFC 2822 forbids empty components in local parts. That is, an unquoted local
+part may not begin or end with a dot, nor have two consecutive dots in the
+middle. However, it seems that many MTAs do not enforce this, so Exim permits
+empty components for compatibility.
+
+
+
+Rewriting addresses
+~~~~~~~~~~~~~~~~~~~
+cindex:[rewriting,addresses]
+Rewriting of sender and recipient addresses, and addresses in headers, can
+happen automatically, or as the result of configuration options, as described
+in chapter <<CHAPrewrite>>. The headers that may be affected by this are 'Bcc:',
+'Cc:', 'From:', 'Reply-To:', 'Sender:', and 'To:'.
+
+Automatic rewriting includes qualification, as mentioned above. The other case
+in which it can happen is when an incomplete non-local domain is given. The
+routing process may cause this to be expanded into the full domain name. For
+example, a header such as
+
+ To: hare@teaparty
+
+might get rewritten as
+
+ To: hare@teaparty.wonderland.fict.example
+
+Rewriting as a result of routing is the one kind of message processing that
+does not happen at input time, as it cannot be done until the address has
+been routed.
+
+Strictly, one should not do 'any' deliveries of a message until all its
+addresses have been routed, in case any of the headers get changed as a
+result of routing. However, doing this in practice would hold up many
+deliveries for unreasonable amounts of time, just because one address could not
+immediately be routed. Exim therefore does not delay other deliveries when
+routing of one or more addresses is deferred.
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPSMTP]]
+SMTP processing
+---------------
+cindex:[SMTP,processing details]
+cindex:[LMTP,processing details]
+Exim supports a number of different ways of using the SMTP protocol, and its
+LMTP variant, which is an interactive protocol for transferring messages into a
+closed mail store application. This chapter contains details of how SMTP is
+processed. For incoming mail, the following are available:
+
+- SMTP over TCP/IP (Exim daemon or 'inetd');
+
+- SMTP over the standard input and output (the %-bs% option);
+
+- Batched SMTP on the standard input (the %-bS% option).
+
+For mail delivery, the following are available:
+
+- SMTP over TCP/IP (the ^smtp^ transport);
+
+- LMTP over TCP/IP (the ^smtp^ transport with the %protocol% option set to
+``lmtp'');
+
+- LMTP over a pipe to a process running in the local host (the ^lmtp^
+transport);
+
+- Batched SMTP to a file or pipe (the ^appendfile^ and ^pipe^ transports with
+the %use_bsmtp% option set).
+
+'Batched SMTP' is the name for a process in which batches of messages are
+stored in or read from files (or pipes), in a format in which SMTP commands are
+used to contain the envelope information.
+
+
+
+[[SECToutSMTPTCP]]
+Outgoing SMTP and LMTP over TCP/IP
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,outgoing over TCP/IP]
+cindex:[outgoing SMTP over TCP/IP]
+cindex:[LMTP,over TCP/IP]
+cindex:[outgoing LMTP over TCP/IP]
+cindex:[EHLO]
+cindex:[HELO]
+cindex:[SIZE option on MAIL command]
+Outgoing SMTP and LMTP over TCP/IP is implemented by the ^smtp^ transport.
+The %protocol% option selects which protocol is to be used, but the actual
+processing is the same in both cases.
+
+If, in response to its EHLO command, Exim is told that the SIZE
+parameter is supported, it adds SIZE=<'n'> to each subsequent MAIL
+command. The value of <'n'> is the message size plus the value of the
+%size_addition% option (default 1024) to allow for additions to the message
+such as per-transport header lines, or changes made in a
+cindex:[transport,filter]
+cindex:[filter,transport filter]
+transport filter. If %size_addition% is set negative, the use of SIZE is
+suppressed.
+
+If the remote server advertises support for PIPELINING, Exim uses the
+pipelining extension to SMTP (RFC 2197) to reduce the number of TCP/IP packets
+required for the transaction.
+
+If the remote server advertises support for the STARTTLS command, and Exim
+was built to support TLS encryption, it tries to start a TLS session unless the
+server matches %hosts_avoid_tls%. See chapter <<CHAPTLS>> for more details.
+
+If the remote server advertises support for the AUTH command, Exim scans
+the authenticators configuration for any suitable client settings, as described
+in chapter <<CHAPSMTPAUTH>>.
+
+cindex:[carriage return]
+cindex:[linefeed]
+Responses from the remote host are supposed to be terminated by CR followed by
+LF. However, there are known to be hosts that do not send CR characters, so in
+order to be able to interwork with such hosts, Exim treats LF on its own as a
+line terminator.
+
+If a message contains a number of different addresses, all those with the same
+characteristics (for example, the same envelope sender) that resolve to the
+same set of hosts, in the same order, are sent in a single SMTP transaction,
+even if they are for different domains, unless there are more than the setting
+of the %max_rcpts% option in the ^smtp^ transport allows, in which case they
+are split into groups containing no more than %max_rcpts% addresses each. If
+%remote_max_parallel% is greater than one, such groups may be sent in
+parallel sessions. The order of hosts with identical MX values is not
+significant when checking whether addresses can be batched in this way.
+
+When the ^smtp^ transport suffers a temporary failure that is not
+message-related, Exim updates its transport-specific database, which contains
+records indexed by host name that remember which messages are waiting for each
+particular host. It also updates the retry database with new retry times.
+
+cindex:[hints database,retry keys]
+Exim's retry hints are based on host name plus IP address, so if one address of
+a multi-homed host is broken, it will soon be skipped most of the time.
+See the next section for more detail about error handling.
+
+cindex:[SMTP,passed connection]
+cindex:[SMTP,batching over TCP/IP]
+When a message is successfully delivered over a TCP/IP SMTP connection, Exim
+looks in the hints database for the transport to see if there are any queued
+messages waiting for the host to which it is connected. If it finds one, it
+creates a new Exim process using the %-MC% option (which can only be used by a
+process running as root or the Exim user) and passes the TCP/IP socket to it so
+that it can deliver another message using the same socket. The new process does
+only those deliveries that are routed to the connected host, and may in turn
+pass the socket on to a third process, and so on.
+
+The %connection_max_messages% option of the ^smtp^ transport can be used to
+limit the number of messages sent down a single TCP/IP connection.
+
+cindex:[asterisk,after IP address]
+The second and subsequent messages delivered down an existing connection are
+identified in the main log by the addition of an asterisk after the closing
+square bracket of the IP address.
+
+
+
+
+[[SECToutSMTPerr]]
+Errors in outgoing SMTP
+~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[error,in outgoing SMTP]
+cindex:[SMTP,errors in outgoing]
+cindex:[host,error]
+Three different kinds of error are recognized for outgoing SMTP: host errors,
+message errors, and recipient errors.
+
+. A host error is not associated with a particular message or with a
+particular recipient of a message. The host errors are:
++
+--
+- Connection refused or timed out,
+
+- Any error response code on connection,
+
+- Any error response code to EHLO or HELO,
+
+- Loss of connection at any time, except after ``.'',
+
+- I/O errors at any time,
+
+- Timeouts during the session, other than in response to MAIL, RCPT or
+the ``.'' at the end of the data.
+--
++
+For a host error, a permanent error response on connection, or in response to
+EHLO, causes all addresses routed to the host to be failed. Any other host
+error causes all addresses to be deferred, and retry data to be created for the
+host. It is not tried again, for any message, until its retry time arrives. If
+the current set of addresses are not all delivered in this run (to some
+alternative host), the message is added to the list of those waiting for this
+host, so if it is still undelivered when a subsequent successful delivery is
+made to the host, it will be sent down the same SMTP connection.
+
+. cindex:[message,error]
+A message error is associated with a particular message when sent to a
+particular host, but not with a particular recipient of the message. The
+message errors are:
++
+--
+- Any error response code to MAIL, DATA, or the ``.'' that terminates
+the data,
+
+- Timeout after MAIL,
+
+- Timeout or loss of connection after the ``.'' that terminates the data. A
+timeout after the DATA command itself is treated as a host error, as is loss of
+connection at any other time.
+--
++
+For a message error, a permanent error response (5##'xx') causes all addresses
+to be failed, and a delivery error report to be returned to the sender. A
+temporary error response (4##'xx'), or one of the timeouts, causes all
+addresses to be deferred. Retry data is not created for the host, but instead,
+a retry record for the combination of host plus message id is created. The
+message is not added to the list of those waiting for this host. This ensures
+that the failing message will not be sent to this host again until the retry
+time arrives. However, other messages that are routed to the host are not
+affected, so if it is some property of the message that is causing the error,
+it will not stop the delivery of other mail.
++
+If the remote host specified support for the SIZE parameter in its response
+to EHLO, Exim adds SIZE='nnn' to the MAIL command, so an
+over-large message will cause a message error because the error arrives as a
+response to MAIL.
+
+. cindex:[recipient,error]
+A recipient error is associated with a particular recipient of a message. The
+recipient errors are:
++
+--
+- Any error response to RCPT,
+
+- Timeout after RCPT.
+--
++
+For a recipient error, a permanent error response (5##'xx') causes the
+recipient address to be failed, and a bounce message to be returned to the
+sender. A temporary error response (4##'xx') or a timeout causes the failing
+address to be deferred, and routing retry data to be created for it. This is
+used to delay processing of the address in subsequent queue runs, until its
+routing retry time arrives. This applies to all messages, but because it
+operates only in queue runs, one attempt will be made to deliver a new message
+to the failing address before the delay starts to operate. This ensures that,
+if the failure is really related to the message rather than the recipient
+(``message too big for this recipient'' is a possible example), other messages
+have a chance of getting delivered. If a delivery to the address does succeed,
+the retry information gets cleared, so all stuck messages get tried again, and
+the retry clock is reset.
++
+The message is not added to the list of those waiting for this host. Use of the
+host for other messages is unaffected, and except in the case of a timeout,
+other recipients are processed independently, and may be successfully delivered
+in the current SMTP session. After a timeout it is of course impossible to
+proceed with the session, so all addresses get deferred. However, those other
+than the one that failed do not suffer any subsequent retry delays. Therefore,
+if one recipient is causing trouble, the others have a chance of getting
+through when a subsequent delivery attempt occurs before the failing
+recipient's retry time.
+
+///
+End of list
+///
+
+In all cases, if there are other hosts (or IP addresses) available for the
+current set of addresses (for example, from multiple MX records), they are
+tried in this run for any undelivered addresses, subject of course to their
+own retry data. In other words, recipient error retry data does not take effect
+until the next delivery attempt.
+
+Some hosts have been observed to give temporary error responses to every
+MAIL command at certain times (``insufficient space'' has been seen). It
+would be nice if such circumstances could be recognized, and defer data for the
+host itself created, but this is not possible within the current Exim design.
+What actually happens is that retry data for every (host, message) combination
+is created.
+
+The reason that timeouts after MAIL and RCPT are treated specially is that
+these can sometimes arise as a result of the remote host's verification
+procedures. Exim makes this assumption, and treats them as if a temporary error
+response had been received. A timeout after ``.'' is treated specially because
+it is known that some broken implementations fail to recognize the end of the
+message if the last character of the last line is a binary zero. Thus, it is
+helpful to treat this case as a message error.
+
+Timeouts at other times are treated as host errors, assuming a problem with the
+host, or the connection to it. If a timeout after MAIL, RCPT,
+or ``.'' is really a connection problem, the assumption is that at the next try
+the timeout is likely to occur at some other point in the dialogue, causing it
+then to be treated as a host error.
+
+There is experimental evidence that some MTAs drop the connection after the
+terminating ``.'' if they do not like the contents of the message for some
+reason, in contravention of the RFC, which indicates that a 5##'xx' response
+should be given. That is why Exim treats this case as a message rather than a
+host error, in order not to delay other messages to the same host.
+
+
+
+
+
+Variable Envelope Return Paths (VERP)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[VERP]
+cindex:[Variable Envelope Return Paths]
+cindex:[envelope sender]
+Variable Envelope Return Paths -- see
+*ftp://koobera.math.uic.edu/www/proto/verp.txt[]* -- can be supported in Exim
+by using the %return_path% generic transport option to rewrite the return path
+at transport time. For example, the following could be used on an ^smtp^
+transport:
+
+....
+return_path = \
+ ${if match {$return_path}{^(.+?)-request@your.dom.example\$}\
+ {$1-request=$local_part%$domain@your.dom.example}fail}
+....
+
+This has the effect of rewriting the return path (envelope sender) on all
+outgoing SMTP messages, if the local part of the original return path ends in
+``-request'', and the domain is 'your.dom.example'. The rewriting inserts the
+local part and domain of the recipient into the return path. Suppose, for
+example, that a message whose return path has been set to
+'somelist-request@your.dom.example' is sent to
+'subscriber@other.dom.example'. In the transport, the return path is
+rewritten as
+
+ somelist-request=subscriber%other.dom.example@your.dom.example
+
+For this to work, you must arrange for outgoing messages that have ``-request''
+in their return paths to have just a single recipient. This can be done by
+setting
+
+ max_rcpt = 1
+
+in the ^smtp^ transport. Otherwise a single copy of a message might be
+addressed to several different recipients in the same domain, in which case
+$local_part$ is not available (because it is not unique). Of course, if you
+do start sending out messages with this kind of return path, you must also
+configure Exim to accept the bounce messages that come back to those paths.
+Typically this would be done by setting an %local_part_suffix% option for a
+suitable router.
+
+The overhead incurred in using VERP depends very much on the size of the
+message, the number of recipient addresses that resolve to the same remote
+host, and the speed of the connection over which the message is being sent. If
+a lot of addresses resolve to the same host and the connection is slow, sending
+a separate copy of the message for each address may take substantially longer
+than sending a single copy with many recipients (for which VERP cannot be
+used).
+
+
+
+Incoming SMTP messages over TCP/IP
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,incoming over TCP/IP]
+cindex:[incoming SMTP over TCP/IP]
+cindex:[inetd]
+cindex:[daemon]
+Incoming SMTP messages can be accepted in one of two ways: by running a
+listening daemon, or by using 'inetd'. In the latter case, the entry in
+_/etc/inetd.conf_ should be like this:
+
+ smtp stream tcp nowait exim /opt/exim/bin/exim in.exim -bs
+
+Exim distinguishes between this case and the case of a locally running user
+agent using the %-bs% option by checking whether or not the standard input is
+a socket. When it is, either the port must be privileged (less than 1024), or
+the caller must be root or the Exim user. If any other user passes a socket
+with an unprivileged port number, Exim prints a message on the standard error
+stream and exits with an error code.
+
+By default, Exim does not make a log entry when a remote host connects or
+disconnects (either via the daemon or 'inetd'), unless the disconnection is
+unexpected. It can be made to write such log entries by setting the
+%smtp_connection% log selector.
+
+cindex:[carriage return]
+cindex:[linefeed]
+Commands from the remote host are supposed to be terminated by CR followed by
+LF. However, there are known to be hosts that do not send CR characters. In
+order to be able to interwork with such hosts, Exim treats LF on its own as a
+line terminator.
+Furthermore, because common code is used for receiving messages from all
+sources, a CR on its own is also interpreted as a line terminator. However, the
+sequence ``CR, dot, CR'' does not terminate incoming SMTP data.
+
+cindex:[EHLO,invalid data]
+cindex:[HELO,invalid data]
+One area that sometimes gives rise to problems concerns the EHLO or
+HELO commands. Some clients send syntactically invalid versions of these
+commands, which Exim rejects by default. (This is nothing to do with verifying
+the data that is sent, so %helo_verify_hosts% is not relevant.) You can tell
+Exim not to apply a syntax check by setting %helo_accept_junk_hosts% to
+match the broken hosts that send invalid commands.
+
+cindex:[SIZE option on MAIL command]
+cindex:[MAIL,SIZE option]
+The amount of disk space available is checked whenever SIZE is received on
+a MAIL command, independently of whether %message_size_limit% or
+%check_spool_space% is configured, unless %smtp_check_spool_space% is set
+false. A temporary error is given if there is not enough space. If
+%check_spool_space% is set, the check is for that amount of space plus the
+value given with SIZE, that is, it checks that the addition of the incoming
+message will not reduce the space below the threshold.
+
+When a message is successfully received, Exim includes the local message id in
+its response to the final ``.'' that terminates the data. If the remote host logs
+this text it can help with tracing what has happened to a message.
+
+The Exim daemon can limit the number of simultaneous incoming connections it is
+prepared to handle (see the %smtp_accept_max% option). It can also limit the
+number of simultaneous incoming connections from a single remote host (see the
+%smtp_accept_max_per_host% option). Additional connection attempts are
+rejected using the SMTP temporary error code 421.
+
+The Exim daemon does not rely on the SIGCHLD signal to detect when a
+subprocess has finished, as this can get lost at busy times. Instead, it looks
+for completed subprocesses every time it wakes up. Provided there are other
+things happening (new incoming calls, starts of queue runs), completed
+processes will be noticed and tidied away. On very quiet systems you may
+sometimes see a ``defunct'' Exim process hanging about. This is not a problem; it
+will be noticed when the daemon next wakes up.
+
+When running as a daemon, Exim can reserve some SMTP slots for specific hosts,
+and can also be set up to reject SMTP calls from non-reserved hosts at times of
+high system load -- for details see the %smtp_accept_reserve%,
+%smtp_load_reserve%, and %smtp_reserve_hosts% options. The load check
+applies in both the daemon and 'inetd' cases.
+
+Exim normally starts a delivery process for each message received, though this
+can be varied by means of the %-odq% command line option and the
+%queue_only%, %queue_only_file%, and %queue_only_load% options. The number
+of simultaneously running delivery processes started in this way from SMTP
+input can be limited by the %smtp_accept_queue% and
+%smtp_accept_queue_per_connection% options. When either limit is reached,
+subsequently received messages are just put on the input queue without starting
+a delivery process.
+
+The controls that involve counts of incoming SMTP calls (%smtp_accept_max%,
+%smtp_accept_queue%, %smtp_accept_reserve%) are not available when Exim is
+started up from the 'inetd' daemon, because in that case each connection is
+handled by an entirely independent Exim process. Control by load average is,
+however, available with 'inetd'.
+
+Exim can be configured to verify addresses in incoming SMTP commands as they
+are received. See chapter <<CHAPACL>> for details. It can also be configured to
+rewrite addresses at this time -- before any syntax checking is done. See
+section <<SECTrewriteS>>.
+
+Exim can also be configured to limit the rate at which a client host submits
+MAIL and RCPT commands in a single SMTP session. See the
+%smtp_ratelimit_hosts% option.
+
+
+
+Unrecognized SMTP commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,unrecognized commands]
+If Exim receives more than %smtp_max_unknown_commands% unrecognized SMTP
+commands during a single SMTP connection, it drops the connection after sending
+the error response to the last command. The default value for
+%smtp_max_unknown_commands% is 3. This is a defence against some kinds of
+abuse that subvert web servers into making connections to SMTP ports; in these
+circumstances, a number of non-SMTP lines are sent first.
+
+
+Syntax and protocol errors in SMTP commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,syntax errors]
+cindex:[SMTP,protocol errors]
+A syntax error is detected if an SMTP command is recognized, but there is
+something syntactically wrong with its data, for example, a malformed email
+address in a RCPT command. Protocol errors include invalid command
+sequencing such as RCPT before MAIL. If Exim receives more than
+%smtp_max_synprot_errors% such commands during a single SMTP connection, it
+drops the connection after sending the error response to the last command. The
+default value for %smtp_max_synprot_errors% is 3. This is a defence against
+broken clients that loop sending bad commands (yes, it has been seen).
+
+
+
+Use of non-mail SMTP commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,non-mail commands]
+The ``non-mail'' SMTP commands are those other than MAIL, RCPT, and
+DATA. Exim counts such commands, and drops the connection if there are too
+many of them in a single SMTP session. This action catches some
+denial-of-service attempts and things like repeated failing AUTHs, or a mad
+client looping sending EHLO. The global option %smtp_accept_max_nonmail%
+defines what ``too many'' means. Its default value is 10.
+
+When a new message is expected, one occurrence of RSET is not counted. This
+allows a client to send one RSET between messages (this is not necessary,
+but some clients do it). Exim also allows one uncounted occurence of HELO
+or EHLO, and one occurrence of STARTTLS between messages. After
+starting up a TLS session, another EHLO is expected, and so it too is not
+counted.
+
+The first occurrence of AUTH in a connection, or immediately following
+STARTTLS is also not counted. Otherwise, all commands other than MAIL,
+RCPT, DATA, and QUIT are counted.
+
+You can control which hosts are subject to the limit set by
+%smtp_accept_max_nonmail% by setting
+%smtp_accept_max_nonmail_hosts%. The default value is `\*`, which makes
+the limit apply to all hosts. This option means that you can exclude any
+specific badly-behaved hosts that you have to live with.
+
+
+
+
+The VRFY and EXPN commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+When Exim receives a VRFY or EXPN command on a TCP/IP connection, it
+runs the ACL specified by %acl_smtp_vrfy% or %acl_smtp_expn% (as
+appropriate) in order to decide whether the command should be accepted or not.
+If no ACL is defined, the command is rejected.
+
+cindex:[VRFY,processing]
+When VRFY is accepted, it runs exactly the same code as when Exim is
+called with the %-bv% option.
+
+cindex:[EXPN,processing]
+When EXPN is accepted, a single-level expansion of the address is done.
+EXPN is treated as an ``address test'' (similar to the %-bt% option) rather
+than a verification (the %-bv% option). If an unqualified local part is given
+as the argument to EXPN, it is qualified with %qualify_domain%. Rejections
+of VRFY and EXPN commands are logged on the main and reject logs, and
+VRFY verification failures are logged on the main log for consistency with
+RCPT failures.
+
+
+
+[[SECTETRN]]
+The ETRN command
+~~~~~~~~~~~~~~~~
+cindex:[ETRN,processing]
+RFC 1985 describes an SMTP command called ETRN that is designed to
+overcome the security problems of the TURN command (which has fallen into
+disuse). When Exim receives an ETRN command on a TCP/IP connection, it runs
+the ACL specified by %acl_smtp_etrn% in order to decide whether the command
+should be accepted or not. If no ACL is defined, the command is rejected.
+
+The ETRN command is concerned with ``releasing'' messages that are awaiting
+delivery to certain hosts. As Exim does not organize its message queue by host,
+the only form of ETRN that is supported by default is the one where the
+text starts with the ``#'' prefix, in which case the remainder of the text is
+specific to the SMTP server. A valid ETRN command causes a run of Exim with
+the %-R% option to happen, with the remainder of the ETRN text as its
+argument. For example,
+
+ ETRN #brigadoon
+
+runs the command
+
+ exim -R brigadoon
+
+which causes a delivery attempt on all messages with undelivered addresses
+containing the text ``brigadoon''. When %smtp_etrn_serialize% is set (the
+default), Exim prevents the simultaneous execution of more than one queue run
+for the same argument string as a result of an ETRN command. This stops
+a misbehaving client from starting more than one queue runner at once.
+
+cindex:[hints database,ETRN serialization]
+Exim implements the serialization by means of a hints database in which a
+record is written whenever a process is started by ETRN, and deleted when
+the process completes. However, Exim does not keep the SMTP session waiting for
+the ETRN process to complete. Once ETRN is accepted, the client is sent
+a ``success'' return code. Obviously there is scope for hints records to get left
+lying around if there is a system or program crash. To guard against this, Exim
+ignores any records that are more than six hours old.
+
+cindex:[%smtp_etrn_command%]
+For more control over what ETRN does, the %smtp_etrn_command% option can
+used. This specifies a command that is run whenever ETRN is received,
+whatever the form of its argument. For
+example:
+
+ smtp_etrn_command = /etc/etrn_command $domain $sender_host_address
+
+The string is split up into arguments which are independently expanded. The
+expansion variable $domain$ is set to the argument of the ETRN command,
+and no syntax checking is done on the contents of this argument. Exim does not
+wait for the command to complete, so its status code is not checked. Exim runs
+under its own uid and gid when receiving incoming SMTP, so it is not possible
+for it to change them before running the command.
+
+
+
+Incoming local SMTP
+~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,local incoming]
+Some user agents use SMTP to pass messages to their local MTA using the
+standard input and output, as opposed to passing the envelope on the command
+line and writing the message to the standard input. This is supported by the
+%-bs% option. This form of SMTP is handled in the same way as incoming
+messages over TCP/IP (including the use of ACLs), except that the envelope
+sender given in a MAIL command is ignored unless the caller is trusted. In
+an ACL you can detect this form of SMTP input by testing for an empty host
+identification. It is common to have this as the first line in the ACL that
+runs for RCPT commands:
+
+ accept hosts = :
+
+This accepts SMTP messages from local processes without doing any other tests.
+
+
+
+[[SECTbatchSMTP]]
+Outgoing batched SMTP
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,batched outgoing]
+cindex:[batched SMTP output]
+Both the ^appendfile^ and ^pipe^ transports can be used for handling batched
+SMTP. Each has an option called %use_bsmtp% which causes messages to be output
+in BSMTP format. No SMTP responses are possible for this form of delivery. All
+it is doing is using SMTP commands as a way of transmitting the envelope along
+with the message.
+
+The message is written to the file or pipe preceded by the SMTP commands
+MAIL and RCPT, and followed by a line containing a single dot. Lines in
+the message that start with a dot have an extra dot added. The SMTP command
+HELO is not normally used. If it is required, the %message_prefix% option
+can be used to specify it.
+
+Because ^appendfile^ and ^pipe^ are both local transports, they accept only
+one recipient address at a time by default. However, you can arrange for them
+to handle several addresses at once by setting the %batch_max% option. When
+this is done for BSMTP, messages may contain multiple RCPT commands. See
+chapter <<CHAPbatching>> for more details.
+
+When one or more addresses are routed to a BSMTP transport by a router that
+sets up a host list, the name of the first host on the list is available to the
+transport in the variable $host$. Here is an example of such a transport and
+router:
+
+ begin routers
+ route_append:
+ driver = manualroute
+ transport = smtp_appendfile
+ route_list = domain.example batch.host.example
+
+ begin transports
+ smtp_appendfile:
+ driver = appendfile
+ directory = /var/bsmtp/$host
+ batch_max = 1000
+ use_bsmtp
+ user = exim
+
+This causes messages addressed to 'domain.example' to be written in BSMTP
+format to _/var/bsmtp/batch.host.example_, with only a single copy of each
+message (unless there are more than 1000 recipients).
+
+
+
+[[SECTincomingbatchedSMTP]]
+Incoming batched SMTP
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[SMTP,batched incoming]
+cindex:[batched SMTP input]
+The %-bS% command line option causes Exim to accept one or more messages by
+reading SMTP on the standard input, but to generate no responses. If the caller
+is trusted, the senders in the MAIL commands are believed; otherwise the
+sender is always the caller of Exim. Unqualified senders and receivers are not
+rejected (there seems little point) but instead just get qualified. HELO
+and EHLO act as RSET; VRFY, EXPN, ETRN and HELP, act
+as NOOP; QUIT quits.
+
+No policy checking is done for BSMTP input. That is, no ACL is run at anytime.
+In this respect it is like non-SMTP local input.
+
+If an error is detected while reading a message, including a missing ``.'' at
+the end, Exim gives up immediately. It writes details of the error to the
+standard output in a stylized way that the calling program should be able to
+make some use of automatically, for example:
+
+ 554 Unexpected end of file
+ Transaction started in line 10
+ Error detected in line 14
+
+It writes a more verbose version, for human consumption, to the standard error
+file, for example:
+
+ An error was detected while processing a file of BSMTP input.
+ The error message was:
+
+ 501 '>' missing at end of address
+
+ The SMTP transaction started in line 10.
+ The error was detected in line 12.
+ The SMTP command at fault was:
+
+ rcpt to:<malformed@in.com.plete
+
+ 1 previous message was successfully processed.
+ The rest of the batch was abandoned.
+
+The return code from Exim is zero only if there were no errors. It is 1 if some
+messages were accepted before an error was detected, and 2 if no messages were
+accepted.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPemsgcust]]
+[titleabbrev="Customizing messages"]
+Customizing bounce and warning messages
+---------------------------------------
+When a message fails to be delivered, or remains on the queue for more than a
+configured amount of time, Exim sends a message to the original sender, or
+to an alternative configured address. The text of these messages is built into
+the code of Exim, but it is possible to change it, either by adding a single
+string, or by replacing each of the paragraphs by text supplied in a file.
+
+The 'From:' and 'To:' header lines are automatically generated; you can cause
+a 'Reply-To:' line to be added by setting the %errors_reply_to% option. Exim
+also adds the line
+
+ Auto-Submitted: auto-generated
+
+to all warning and bounce messages,
+
+
+Customizing bounce messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[customizing,bounce message]
+cindex:[bounce message,customizing]
+If %bounce_message_text% is set, its contents are included in the default
+message immediately after ``This message was created automatically by mail
+delivery software.'' The string is not expanded. It is not used if
+%bounce_message_file% is set.
+
+When %bounce_message_file% is set, it must point to a template file for
+constructing error messages. The file consists of a series of text items,
+separated by lines consisting of exactly four asterisks. If the file cannot be
+opened, default text is used and a message is written to the main and panic
+logs. If any text item in the file is empty, default text is used for that
+item.
+
+Each item of text that is read from the file is expanded, and there are two
+expansion variables which can be of use here: $bounce_recipient$ is set to
+the recipient of an error message while it is being created, and
+$return_size_limit$ contains the value of the %return_size_limit% option,
+rounded to a whole number.
+
+The items must appear in the file in the following order:
+
+- The first item is included in the headers, and should include at least a
+'Subject:' header. Exim does not check the syntax of these headers.
+
+- The second item forms the start of the error message. After it, Exim lists the
+failing addresses with their error messages.
+
+- The third item is used to introduce any text from pipe transports that is to be
+returned to the sender. It is omitted if there is no such text.
+
+- The fourth item is used to introduce the copy of the message that is returned
+as part of the error report.
+
+- The fifth item is added after the fourth one if the returned message is
+truncated because it is bigger than %return_size_limit%.
+
+- The sixth item is added after the copy of the original message.
+
+The default state (%bounce_message_file% unset) is equivalent to the
+following file, in which the sixth item is empty. The 'Subject:' line has been
+split into two here in order to fit it on the page:
+
+ Subject: Mail delivery failed
+ ${if eq{$sender_address}{$bounce_recipient}{: returning message to sender}}
+ ****
+ This message was created automatically by mail delivery software.
+
+ A message ${if eq{$sender_address}{$bounce_recipient}{that you sent }{sent by
+
+ <$sender_address>
+
+ }}could not be delivered to all of its recipients.
+ The following address(es) failed:
+ ****
+ The following text was generated during the delivery attempt(s):
+ ****
+ ------ This is a copy of the message, including all the headers. ------
+ ****
+ ------ The body of the message is $message_size characters long; only the first
+ ------ $return_size_limit or so are included here.
+ ****
+
+
+[[SECTcustwarn]]
+Customizing warning messages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[customizing,warning message]
+cindex:[warning of delay,customizing the message]
+The option %warn_message_file% can be pointed at a template file for use when
+warnings about message delays are created. In this case there are only three
+text sections:
+
+- The first item is included in the headers, and should include at least a
+'Subject:' header. Exim does not check the syntax of these headers.
+
+- The second item forms the start of the warning message. After it, Exim lists
+the delayed addresses.
+
+- The third item then ends the message.
+
+The default state is equivalent to the following file, except that the line
+starting ``A message'' has been split here, in order to fit it on the page:
+
+ Subject: Warning: message $message_id delayed $warn_message_delay
+ ****
+ This message was created automatically by mail delivery software.
+
+ A message ${if eq{$sender_address}{$warn_message_recipients}
+ {that you sent }{sent by
+
+ <$sender_address>
+
+ }}has not been delivered to all of its recipients after
+ more than $warn_message_delay on the queue on $primary_hostname.
+
+ The message identifier is: $message_id
+ The subject of the message is: $h_subject
+ The date of the message is: $h_date
+
+ The following address(es) have not yet been delivered:
+ ****
+ No action is required on your part. Delivery attempts will continue for
+ some time, and this warning may be repeated at intervals if the message
+ remains undelivered. Eventually the mail delivery software will give up,
+ and when that happens, the message will be returned to you.
+
+except that in the default state the subject and date lines are omitted if no
+appropriate headers exist. During the expansion of this file,
+$warn_message_delay$ is set to the delay time in one of the forms ``<''n'>
+minutes' or ``<''n'> hours', and $warn_message_recipients$ contains a list of
+recipients for the warning message. There may be more than one if there are
+multiple addresses with different %errors_to% settings on the routers that
+handled them.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPcomconreq]]
+[titleabbrev="Common configuration settings"]
+Some common configuration settings
+----------------------------------
+This chapter discusses some configuration settings that seem to be fairly
+common. More examples and discussion can be found in the Exim book.
+
+
+
+Sending mail to a smart host
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[smart host,example router]
+If you want to send all mail for non-local domains to a ``smart host'', you
+should replace the default ^dnslookup^ router with a router which does the
+routing explicitly:
+
+ send_to_smart_host:
+ driver = manualroute
+ route_list = !+local_domains smart.host.name
+ transport = remote_smtp
+
+You can use the smart host's IP address instead of the name if you wish.
+
+If you are using Exim only to submit messages to a smart host, and not for
+receiving incoming messages, you can arrange for it to do the submission
+synchronously by setting the %mua_wrapper% option (see chapter
+<<CHAPnonqueueing>>).
+
+
+
+
+[[SECTmailinglists]]
+Using Exim to handle mailing lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[mailing lists]
+Exim can be used to run simple mailing lists, but for large and/or complicated
+requirements, the use of additional specialized mailing list software such as
+Majordomo or Mailman is recommended.
+
+The ^redirect^ router can be used to handle mailing lists where each list
+is maintained in a separate file, which can therefore be managed by an
+independent manager. The %domains% router option can be used to run these
+lists in a separate domain from normal mail. For example:
+
+ lists:
+ driver = redirect
+ domains = lists.example
+ file = /usr/lists/$local_part
+ forbid_pipe
+ forbid_file
+ errors_to = $local_part-request@lists.example
+ no_more
+
+This router is skipped for domains other than 'lists.example'. For addresses
+in that domain, it looks for a file that matches the local part. If there is no
+such file, the router declines, but because %no_more% is set, no subsequent
+routers are tried, and so the whole delivery fails.
+
+The %forbid_pipe% and %forbid_file% options prevent a local part from being
+expanded into a file name or a pipe delivery, which is usually inappropriate in
+a mailing list.
+
+cindex:[%errors_to%]
+The %errors_to% option specifies that any delivery errors caused by addresses
+taken from a mailing list are to be sent to the given address rather than the
+original sender of the message. However, before acting on this, Exim verifies
+the error address, and ignores it if verification fails.
+
+For example, using the configuration above, mail sent to
+'dicts@lists.example' is passed on to those addresses contained in
+_/usr/lists/dicts_, with error reports directed to
+'dicts-request@lists.example', provided that this address can be verified.
+There could be a file called _/usr/lists/dicts-request_ containing
+the address(es) of this particular list's manager(s), but other approaches,
+such as setting up an earlier router (possibly using the %local_part_prefix%
+or %local_part_suffix% options) to handle addresses of the form %owner-xxx%
+or %xxx-request%, are also possible.
+
+
+
+Syntax errors in mailing lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[mailing lists,syntax errors in]
+If an entry in redirection data contains a syntax error, Exim normally defers
+delivery of the original address. That means that a syntax error in a mailing
+list holds up all deliveries to the list. This may not be appropriate when a
+list is being maintained automatically from data supplied by users, and the
+addresses are not rigorously checked.
+
+If the %skip_syntax_errors% option is set, the ^redirect^ router just skips
+entries that fail to parse, noting the incident in the log. If in addition
+%syntax_errors_to% is set to a verifiable address, a message is sent to it
+whenever a broken address is skipped. It is usually appropriate to set
+%syntax_errors_to% to the same address as %errors_to%.
+
+
+
+Re-expansion of mailing lists
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[mailing lists,re-expansion of]
+Exim remembers every individual address to which a message has been delivered,
+in order to avoid duplication, but it normally stores only the original
+recipient addresses with a message. If all the deliveries to a mailing list
+cannot be done at the first attempt, the mailing list is re-expanded when the
+delivery is next tried. This means that alterations to the list are taken into
+account at each delivery attempt, so addresses that have been added to
+the list since the message arrived will therefore receive a copy of the
+message, even though it pre-dates their subscription.
+
+If this behaviour is felt to be undesirable, the %one_time% option can be set
+on the ^redirect^ router. If this is done, any addresses generated by the
+router that fail to deliver at the first attempt are added to the message as
+``top level'' addresses, and the parent address that generated them is marked
+``delivered''. Thus, expansion of the mailing list does not happen again at the
+subsequent delivery attempts. The disadvantage of this is that if any of the
+failing addresses are incorrect, correcting them in the file has no effect on
+pre-existing messages.
+
+The original top-level address is remembered with each of the generated
+addresses, and is output in any log messages. However, any intermediate parent
+addresses are not recorded. This makes a difference to the log only if the
+%all_parents% selector is set, but for mailing lists there is normally only
+one level of expansion anyway.
+
+
+
+Closed mailing lists
+~~~~~~~~~~~~~~~~~~~~
+cindex:[mailing lists,closed]
+The examples so far have assumed open mailing lists, to which anybody may
+send mail. It is also possible to set up closed lists, where mail is accepted
+from specified senders only. This is done by making use of the generic
+%senders% option to restrict the router that handles the list.
+
+The following example uses the same file as a list of recipients and as a list
+of permitted senders. It requires three routers:
+
+....
+lists_request:
+ driver = redirect
+ domains = lists.example
+ local_part_suffix = -request
+ file = /usr/lists/$local_part$local_part_suffix
+ no_more
+
+lists_post:
+ driver = redirect
+ domains = lists.example
+ senders = ${if exists {/usr/lists/$local_part}\
+ {lsearch;/usr/lists/$local_part}{*}}
+ file = /usr/lists/$local_part
+ forbid_pipe
+ forbid_file
+ errors_to = $local_part-request@lists.example
+ no_more
+
+lists_closed:
+ driver = redirect
+ domains = lists.example
+ allow_fail
+ data = :fail: $local_part@lists.example is a closed mailing list
+....
+
+All three routers have the same %domains% setting, so for any other domains,
+they are all skipped. The first router runs only if the local part ends in
+%-request%. It handles messages to the list manager(s) by means of an open
+mailing list.
+
+The second router runs only if the %senders% precondition is satisfied. It
+checks for the existence of a list that corresponds to the local part, and then
+checks that the sender is on the list by means of a linear search. It is
+necessary to check for the existence of the file before trying to search it,
+because otherwise Exim thinks there is a configuration error. If the file does
+not exist, the expansion of %senders% is \*, which matches all senders. This
+means that the router runs, but because there is no list, declines, and
+%no_more% ensures that no further routers are run. The address fails with an
+``unrouteable address'' error.
+
+The third router runs only if the second router is skipped, which happens when
+a mailing list exists, but the sender is not on it. This router forcibly fails
+the address, giving a suitable error message.
+
+
+
+
+[[SECTvirtualdomains]]
+Virtual domains
+~~~~~~~~~~~~~~~
+cindex:[virtual domains]
+cindex:[domain,virtual]
+The phrase 'virtual domain' is unfortunately used with two rather different
+meanings:
+
+- A domain for which there are no real mailboxes; all valid local parts are
+aliases for other email addresses. Common examples are organizational
+top-level domains and ``vanity'' domains.
+
+- One of a number of independent domains that are all handled by the same host,
+with mailboxes on that host, but where the mailbox owners do not necessarily
+have login accounts on that host.
+
+The first usage is probably more common, and does seem more ``virtual'' than the
+second. This kind of domain can be handled in Exim with a straightforward
+aliasing router. One approach is to create a separate alias file for each
+virtual domain. Exim can test for the existence of the alias file to determine
+whether the domain exists. The ^dsearch^ lookup type is useful here, leading
+to a router of this form:
+
+ virtual:
+ driver = redirect
+ domains = dsearch;/etc/mail/virtual
+ data = ${lookup{$local_part}lsearch{/etc/mail/virtual/$domain}}
+ no_more
+
+The %domains% option specifies that the router is to be skipped, unless there
+is a file in the _/etc/mail/virtual_ directory whose name is the same as the
+domain that is being processed. When the router runs, it looks up the local
+part in the file to find a new address (or list of addresses). The %no_more%
+setting ensures that if the lookup fails (leading to %data% being an empty
+string), Exim gives up on the address without trying any subsequent routers.
+
+This one router can handle all the virtual domains because the alias file names
+follow a fixed pattern. Permissions can be arranged so that appropriate people
+can edit the different alias files. A successful aliasing operation results in
+a new envelope recipient address, which is then routed from scratch.
+
+The other kind of ``virtual'' domain can also be handled in a straightforward
+way. One approach is to create a file for each domain containing a list of
+valid local parts, and use it in a router like this:
+
+ my_domains:
+ driver = accept
+ domains = dsearch;/etc/mail/domains
+ local_parts = lsearch;/etc/mail/domains/$domain
+ transport = my_mailboxes
+
+The address is accepted if there is a file for the domain, and the local part
+can be found in the file. The %domains% option is used to check for the file's
+existence because %domains% is tested before the %local_parts% option (see
+section <<SECTrouprecon>>). You can't use %require_files%, because that option
+is tested after %local_parts%. The transport is as follows:
+
+ my_mailboxes:
+ driver = appendfile
+ file = /var/mail/$domain/$local_part
+ user = mail
+
+This uses a directory of mailboxes for each domain. The %user% setting is
+required, to specify which uid is to be used for writing to the mailboxes.
+
+The configuration shown here is just one example of how you might support this
+requirement. There are many other ways this kind of configuration can be set
+up, for example, by using a database instead of separate files to hold all the
+information about the domains.
+
+
+
+[[SECTmulbox]]
+Multiple user mailboxes
+~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[multiple mailboxes]
+cindex:[mailbox,multiple]
+cindex:[local part,prefix]
+cindex:[local part,suffix]
+Heavy email users often want to operate with multiple mailboxes, into which
+incoming mail is automatically sorted. A popular way of handling this is to
+allow users to use multiple sender addresses, so that replies can easily be
+identified. Users are permitted to add prefixes or suffixes to their local
+parts for this purpose. The wildcard facility of the generic router options
+%local_part_prefix% and %local_part_suffix% can be used for this. For
+example, consider this router:
+
+ userforward:
+ driver = redirect
+ check_local_user
+ file = $home/.forward
+ local_part_suffix = -*
+ local_part_suffix_optional
+ allow_filter
+
+It runs a user's _.forward_ file for all local parts of the form
+'username-\*'. Within the filter file the user can distinguish different
+cases by testing the variable $local_part_suffix$. For example:
+
+ if $local_part_suffix contains -special then
+ save /home/$local_part/Mail/special
+ endif
+
+If the filter file does not exist, or does not deal with such addresses, they
+fall through to subsequent routers, and, assuming no subsequent use of the
+%local_part_suffix% option is made, they presumably fail. Thus, users have
+control over which suffixes are valid.
+
+Alternatively, a suffix can be used to trigger the use of a different
+_.forward_ file -- which is the way a similar facility is implemented in
+another MTA:
+
+ userforward:
+ driver = redirect
+ check_local_user
+ file = $home/.forward$local_part_suffix
+ local_part_suffix = -*
+ local_part_suffix_optional
+ allow_filter
+
+If there is no suffix, _.forward_ is used; if the suffix is '-special', for
+example, _.forward-special_ is used. Once again, if the appropriate file
+does not exist, or does not deal with the address, it is passed on to
+subsequent routers, which could, if required, look for an unqualified
+_.forward_ file to use as a default.
+
+
+
+Simplified vacation processing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[vacation processing]
+The traditional way of running the 'vacation' program is for a user to set up
+a pipe command in a _.forward_ file
+(see section <<SECTspecitredli>> for syntax details).
+This is prone to error by inexperienced users. There are two features of Exim
+that can be used to make this process simpler for users:
+
+- A local part prefix such as ``vacation-'' can be specified on a router which
+can cause the message to be delivered directly to the 'vacation' program, or
+alternatively can use Exim's ^autoreply^ transport. The contents of a user's
+_.forward_ file are then much simpler. For example:
+
+ spqr, vacation-spqr
+
+- The %require_files% generic router option can be used to trigger a
+vacation delivery by checking for the existence of a certain file in the
+user's home directory. The %unseen% generic option should also be used, to
+ensure that the original delivery also proceeds. In this case, all the user has
+to do is to create a file called, say, _.vacation_, containing a vacation
+message.
+
+Another advantage of both these methods is that they both work even when the
+use of arbitrary pipes by users is locked out.
+
+
+
+Taking copies of mail
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[message,copying every]
+Some installations have policies that require archive copies of all messages to
+be made. A single copy of each message can easily be taken by an appropriate
+command in a system filter, which could, for example, use a different file for
+each day's messages.
+
+There is also a shadow transport mechanism that can be used to take copies of
+messages that are successfully delivered by local transports, one copy per
+delivery. This could be used, 'inter alia', to implement automatic
+notification of delivery by sites that insist on doing such things.
+
+
+
+Intermittently connected hosts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[intermittently connected hosts]
+It has become quite common (because it is cheaper) for hosts to connect to the
+Internet periodically rather than remain connected all the time. The normal
+arrangement is that mail for such hosts accumulates on a system that is
+permanently connected.
+
+Exim was designed for use on permanently connected hosts, and so it is not
+particularly well-suited to use in an intermittently connected environment.
+Nevertheless there are some features that can be used.
+
+
+Exim on the upstream server host
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+It is tempting to arrange for incoming mail for the intermittently connected
+host to remain on Exim's queue until the client connects. However, this
+approach does not scale very well. Two different kinds of waiting message are
+being mixed up in the same queue -- those that cannot be delivered because of
+some temporary problem, and those that are waiting for their destination host
+to connect. This makes it hard to manage the queue, as well as wasting
+resources, because each queue runner scans the entire queue.
+
+A better approach is to separate off those messages that are waiting for an
+intermittently connected host. This can be done by delivering these messages
+into local files in batch SMTP, ``mailstore'', or other envelope-preserving
+format, from where they are transmitted by other software when their
+destination connects. This makes it easy to collect all the mail for one host
+in a single directory, and to apply local timeout rules on a per-message basis
+if required.
+
+On a very small scale, leaving the mail on Exim's queue can be made to work. If
+you are doing this, you should configure Exim with a long retry period for the
+intermittent host. For example:
+
+ cheshire.wonderland.fict.example * F,5d,24h
+
+This stops a lot of failed delivery attempts from occurring, but Exim remembers
+which messages it has queued up for that host. Once the intermittent host comes
+online, forcing delivery of one message (either by using the %-M% or %-R%
+options, or by using the ETRN SMTP command (see section <<SECTETRN>>)
+causes all the queued up messages to be delivered, often down a single SMTP
+connection. While the host remains connected, any new messages get delivered
+immediately.
+
+If the connecting hosts do not have fixed IP addresses, that is, if a host is
+issued with a different IP address each time it connects, Exim's retry
+mechanisms on the holding host get confused, because the IP address is normally
+used as part of the key string for holding retry information. This can be
+avoided by unsetting %retry_include_ip_address% on the ^smtp^ transport.
+Since this has disadvantages for permanently connected hosts, it is best to
+arrange a separate transport for the intermittently connected ones.
+
+
+
+Exim on the intermittently connected client host
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The value of %smtp_accept_queue_per_connection% should probably be
+increased, or even set to zero (that is, disabled) on the intermittently
+connected host, so that all incoming messages down a single connection get
+delivered immediately.
+
+cindex:[SMTP,passed connection]
+cindex:[SMTP,multiple deliveries]
+cindex:[multiple SMTP deliveries]
+Mail waiting to be sent from an intermittently connected host will probably
+not have been routed, because without a connection DNS lookups are not
+possible. This means that if a normal queue run is done at connection time,
+each message is likely to be sent in a separate SMTP session. This can be
+avoided by starting the queue run with a command line option beginning with
+%-qq% instead of %-q%. In this case, the queue is scanned twice. In the first
+pass, routing is done but no deliveries take place. The second pass is a normal
+queue run; since all the messages have been previously routed, those destined
+for the same host are likely to get sent as multiple deliveries in a single
+SMTP connection.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPnonqueueing]]
+[titleabbrev="Exim as a non-queueing client"]
+Using Exim as a non-queueing client
+-----------------------------------
+cindex:[client, non-queueing]
+cindex:[smart host,queueing; suppressing]
+On a personal computer, it is a common requirement for all
+email to be sent to a ``smart host''. There are plenty of MUAs that can be
+configured to operate that way, for all the popular operating systems.
+However, there are some MUAs for Unix-like systems that cannot be so
+configured: they submit messages using the command line interface of
+_/usr/sbin/sendmail_. Furthermore, utility programs such as 'cron' submit
+messages this way.
+
+If the personal computer runs continuously, there is no problem, because it can
+run a conventional MTA that handles delivery to the smart host, and deal with
+any delays via its queueing mechanism. However, if the computer does not run
+continuously or runs different operating systems at different times, queueing
+email is not desirable.
+
+There is therefore a requirement for something that can provide the
+_/usr/sbin/sendmail_ interface but deliver messages to a smart host without
+any queueing or retrying facilities. Furthermore, the delivery to the smart
+host should be synchronous, so that if it fails, the sending MUA is immediately
+informed. In other words, we want something that extends an MUA that submits
+to a local MTA via the command line so that it behaves like one that submits
+to a remote smart host using TCP/SMTP.
+
+There are a number of applications (for example, there is one called 'ssmtp')
+that do this job. However, people have found them to be lacking in various
+ways. For instance, you might want to allow aliasing and forwarding to be done
+before sending a message to the smart host.
+
+Exim already had the necessary infrastructure for doing this job. Just a few
+tweaks were needed to make it behave as required, though it is somewhat of an
+overkill to use a fully-featured MTA for this purpose.
+
+cindex:[%mua_wrapper%]
+There is a Boolean global option called %mua_wrapper%, defaulting false.
+Setting %mua_wrapper% true causes Exim to run in a special mode where it
+assumes that it is being used to ``wrap'' a command-line MUA in the manner
+just described. As well as setting %mua_wrapper%, you also need to provide a
+compatible router and transport configuration. Typically there will be just one
+router and one transport, sending everything to a smart host.
+
+When run in MUA wrapping mode, the behaviour of Exim changes in the
+following ways:
+
+- A daemon cannot be run, nor will Exim accept incoming messages from 'inetd'.
+In other words, the only way to submit messages is via the command line.
+
+- Each message is synchonously delivered as soon as it is received (%-odi% is
+assumed). All queueing options (%queue_only%, %queue_smtp_domains%,
+%control% in an ACL, etc.) are quietly ignored. The Exim reception process does
+not finish until the delivery attempt is complete. If the delivery is
+successful, a zero return code is given.
+
+- Address redirection is permitted, but the final routing for all addresses must
+be to the same remote transport, and to the same list of hosts. Furthermore,
+the return address (envelope sender) must be the same for all recipients, as
+must any added or deleted header lines. In other words, it must be possible to
+deliver the message in a single SMTP transaction, however many recipients there
+are.
+
+- If these conditions are not met, or if routing any address results in a
+failure or defer status, or if Exim is unable to deliver all the recipients
+successfully to one of the smart hosts, delivery of the entire message fails.
+
+- Because no queueing is allowed, all failures are treated as permanent; there
+is no distinction between 4##'xx' and 5##'xx' SMTP response codes from the
+smart host. Furthermore, because only a single yes/no response can be given to
+the caller, it is not possible to deliver to some recipients and not others. If
+there is an error (temporary or permanent) for any recipient, all are failed.
+
+- If more than one smart host is listed, Exim will try another host after a
+connection failure or a timeout, in the normal way. However, if this kind of
+failure happens for all the hosts, the delivery fails.
+
+- When delivery fails, an error message is written to the standard error stream
+(as well as to Exim's log), and Exim exits to the caller with a return code
+value 1. The message is expunged from Exim's spool files. No bounce messages
+are ever generated.
+
+- No retry data is maintained, and any retry rules are ignored.
+
+- A number of Exim options are overridden: %deliver_drop_privilege% is forced
+true, %max_rcpt% in the smtp transport is forced to ``unlimited'',
+%remote_max_parallel% is forced to one, and fallback hosts are ignored.
+
+The overall effect is that Exim makes a single synchronous attempt to deliver
+the message, failing if there is any kind of problem. Because no local
+deliveries are done and no daemon can be run, Exim does not need root
+privilege. It should be possible to run it setuid to 'exim' instead of setuid
+to 'root'. See section <<SECTrunexiwitpri>> for a general discussion about the
+advantages and disadvantages of running without root privilege.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPlog]]
+Log files
+---------
+cindex:[log,types of]
+cindex:[log,general description]
+Exim writes three different logs, referred to as the main log, the reject log,
+and the panic log:
+
+- cindex:[main log]
+The main log records the arrival of each message and each delivery in a single
+line in each case. The format is as compact as possible, in an attempt to keep
+down the size of log files. Two-character flag sequences make it easy to pick
+out these lines. A number of other events are recorded in the main log. Some of
+them are optional, in which case the %log_selector% option controls whether
+they are included or not. A Perl script called 'eximstats', which does simple
+analysis of main log files, is provided in the Exim distribution (see section
+<<SECTmailstat>>).
+
+- cindex:[reject log]
+The reject log records information from messages that are rejected as a result
+of a configuration option (that is, for policy reasons).
+The first line of each rejection is a copy of the line that is also written to
+the main log. Then, if the message's header has been read at the time the log
+is written, its contents are written to this log. Only the original header
+lines are available; header lines added by ACLs are not logged. You can use the
+reject log to check that your policy controls are working correctly; on a busy
+host this may be easier than scanning the main log for rejection messages. You
+can suppress the writing of the reject log by setting %write_rejectlog% false.
+
+- cindex:[panic log]
+cindex:[system log]
+When certain serious errors occur, Exim writes entries to its panic log. If the
+error is sufficiently disastrous, Exim bombs out afterwards. Panic log entries
+are usually written to the main log as well, but can get lost amid the mass of
+other entries. The panic log should be empty under normal circumstances. It is
+therefore a good idea to check it (or to have a 'cron' script check it)
+regularly, in order to become aware of any problems. When Exim cannot open its
+panic log, it tries as a last resort to write to the system log (syslog). This
+is opened with LOG_PID+LOG_CONS and the facility code of LOG_MAIL. The
+message itself is written at priority LOG_CRIT.
+
+Every log line starts with a timestamp, in the format shown in this example:
+
+ 2001-09-16 16:09:47 SMTP connection from [127.0.0.1] closed by QUIT
+
+By default, the timestamps are in the local timezone. There are two
+ways of changing this:
+
+- You can set the %timezone% option to a different time zone; in particular, if
+you set
++
+ timezone = UTC
++
+the timestamps will be in UTC (aka GMT).
+
+- If you set %log_timezone% true, the time zone is added to the timestamp, for
+example:
++
+ 2003-04-25 11:17:07 +0100 Start queue run: pid=12762
+
+
+
+
+
+[[SECTwhelogwri]]
+Where the logs are written
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,destination]
+cindex:[log,to file]
+cindex:[log,to syslog]
+cindex:[syslog]
+The logs may be written to local files, or to syslog, or both. However, it
+should be noted that many syslog implementations use UDP as a transport, and
+are therefore unreliable in the sense that messages are not guaranteed to
+arrive at the loghost, nor is the ordering of messages necessarily maintained.
+It has also been reported that on large log files (tens of megabytes) you may
+need to tweak syslog to prevent it syncing the file with each write -- on Linux
+this has been seen to make syslog take 90% plus of CPU time.
+
+The destination for Exim's logs is configured by setting LOG_FILE_PATH in
+_Local/Makefile_ or by setting %log_file_path% in the run time
+configuration. This latter string is expanded, so it can contain, for example,
+references to the host name:
+
+ log_file_path = /var/log/$primary_hostname/exim_%slog
+
+It is generally advisable, however, to set the string in _Local/Makefile_
+rather than at run time, because then the setting is available right from the
+start of Exim's execution. Otherwise, if there's something it wants to log
+before it has read the configuration file (for example, an error in the
+configuration file) it will not use the path you want, and may not be able to
+log at all.
+
+The value of LOG_FILE_PATH or %log_file_path% is a colon-separated
+list, currently limited to at most two items. This is one option where the
+facility for changing a list separator may not be used. The list must always be
+colon-separated. If an item in the list is ``syslog'' then syslog is used;
+otherwise the item must either be an absolute path, containing `%s` at the
+point where ``main'', ``reject'', or ``panic'' is to be inserted, or be empty,
+implying the use of a default path.
+
+When Exim encounters an empty item in the list, it searches the list defined by
+LOG_FILE_PATH, and uses the first item it finds that is neither empty nor
+``syslog''. This means that an empty item in %log_file_path% can be used to
+mean ``use the path specified at build time''. It no such item exists, log files
+are written in the _log_ subdirectory of the spool directory. This is
+equivalent to the setting:
+
+ log_file_path = $spool_directory/log/%slog
+
+If you do not specify anything at build time or run time, that is where the
+logs are written.
+
+A log file path may also contain `%D` if datestamped log file names are in
+use -- see section <<SECTdatlogfil>> below.
+
+Here are some examples of possible settings:
+
+&&&
+`LOG_FILE_PATH=syslog ` syslog only
+`LOG_FILE_PATH=:syslog ` syslog and default path
+`LOG_FILE_PATH=syslog : /usr/log/exim_%s ` syslog and specified path
+`LOG_FILE_PATH=/usr/log/exim_%s ` specified path only
+&&&
+
+If there are more than two paths in the list, the first is used and a panic
+error is logged.
+
+
+
+Logging to local files that are periodically ``cycled''
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,cycling local files]
+cindex:[cycling logs]
+cindex:['exicyclog']
+cindex:[log,local files; writing to]
+Some operating systems provide centralized and standardised methods for cycling
+log files. For those that do not, a utility script called 'exicyclog' is
+provided (see section <<SECTcyclogfil>>). This renames and compresses the main
+and reject logs each time it is called. The maximum number of old logs to keep
+can be set. It is suggested this script is run as a daily 'cron' job.
+
+An Exim delivery process opens the main log when it first needs to write to it,
+and it keeps the file open in case subsequent entries are required -- for
+example, if a number of different deliveries are being done for the same
+message. However, remote SMTP deliveries can take a long time, and this means
+that the file may be kept open long after it is renamed if 'exicyclog' or
+something similar is being used to rename log files on a regular basis. To
+ensure that a switch of log files is noticed as soon as possible, Exim calls
+'stat()' on the main log's name before reusing an open file, and if the file
+does not exist, or its inode has changed, the old file is closed and Exim
+tries to open the main log from scratch. Thus, an old log file may remain open
+for quite some time, but no Exim processes should write to it once it has been
+renamed.
+
+
+
+[[SECTdatlogfil]]
+Datestamped log files
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,datestamped files]
+Instead of cycling the main and reject log files by renaming them
+periodically, some sites like to use files whose names contain a datestamp,
+for example, _mainlog-20031225_. The datestamp is in the form _yyyymmdd_.
+Exim has support for this way of working. It is enabled by setting the
+%log_file_path% option to a path that includes `%D` at the point where the
+datestamp is required. For example:
+
+ log_file_path = /var/spool/exim/log/%slog-%D
+ log_file_path = /var/log/exim-%s-%D.log
+ log_file_path = /var/spool/exim/log/%D-%slog
+
+As before, `%s` is replaced by ``main'' or ``reject''; the following are examples
+of names generated by the above examples:
+
+ /var/spool/exim/log/mainlog-20021225
+ /var/log/exim-reject-20021225.log
+ /var/spool/exim/log/20021225-mainlog
+
+When this form of log file is specified, Exim automatically switches to new
+files at midnight. It does not make any attempt to compress old logs; you
+will need to write your own script if you require this. You should not
+run 'exicyclog' with this form of logging.
+
+The location of the panic log is also determined by %log_file_path%, but it
+is not datestamped, because rotation of the panic log does not make sense.
+When generating the name of the panic log, `%D` is removed from the string.
+In addition, if it immediately follows a slash, a following non-alphanumeric
+character is removed; otherwise a preceding non-alphanumeric character is
+removed. Thus, the three examples above would give these panic log names:
+
+ /var/spool/exim/log/paniclog
+ /var/log/exim-panic.log
+ /var/spool/exim/log/paniclog
+
+
+
+
+Logging to syslog
+~~~~~~~~~~~~~~~~~
+cindex:[log,syslog; writing to]
+The use of syslog does not change what Exim logs or the format of its messages,
+except in one respect. If %syslog_timestamp% is set false, the timestamps on
+Exim's log lines are omitted when these lines are sent to syslog. Apart from
+that, the same strings are written to syslog as to log files. The syslog
+``facility'' is set to LOG_MAIL, and the program name to ``exim''
+by default, but you can change these by setting the %syslog_facility% and
+%syslog_processname% options, respectively. If Exim was compiled with
+SYSLOG_LOG_PID set in _Local/Makefile_ (this is the default in
+_src/EDITME_), then, on systems that permit it (all except ULTRIX), the
+LOG_PID flag is set so that the 'syslog()' call adds the pid as well as
+the time and host name to each line.
+The three log streams are mapped onto syslog priorities as follows:
+
+- 'mainlog' is mapped to LOG_INFO
+
+- 'rejectlog' is mapped to LOG_NOTICE
+
+- 'paniclog' is mapped to LOG_ALERT
+
+Many log lines are written to both 'mainlog' and 'rejectlog', and some are
+written to both 'mainlog' and 'paniclog', so there will be duplicates if
+these are routed by syslog to the same place. You can suppress this duplication
+by setting %syslog_duplication% false.
+
+Exim's log lines can sometimes be very long, and some of its 'rejectlog'
+entries contain multiple lines when headers are included. To cope with both
+these cases, entries written to syslog are split into separate 'syslog()'
+calls at each internal newline, and also after a maximum of
+870 data characters. (This allows for a total syslog line length of 1024, when
+additions such as timestamps are added.) If you are running a syslog
+replacement that can handle lines longer than the 1024 characters allowed by
+RFC 3164, you should set
+
+ SYSLOG_LONG_LINES=yes
+
+in _Local/Makefile_ before building Exim. That stops Exim from splitting long
+lines, but it still splits at internal newlines in 'reject' log entries.
+
+To make it easy to re-assemble split lines later, each component of a split
+entry starts with a string of the form ``[<''n'>/<'m'>]' or ``[<''n'>\<'m'>]'
+where <'n'> is the component number and <'m'> is the total number of components
+in the entry. The / delimiter is used when the line was split because it was
+too long; if it was split because of an internal newline, the \ delimiter is
+used. For example, supposing the length limit to be 70 instead of 1000, the
+following would be the result of a typical rejection message to 'mainlog'
+(LOG_INFO), each line in addition being preceded by the time, host name, and
+pid as added by syslog:
+
+ $smc\{[1/3] 2002-09-16 16:09:43 16RdAL-0006pc-00 rejected from [127.0.0.1] (ph10):
+ [2/3] syntax error in 'From' header when scanning for sender: missing or ma
+ [3/3] lformed local part in "<>" (envelope sender is <ph10@cam.example>)\}
+
+The same error might cause the following lines to be written to ``rejectlog''
+(LOG_NOTICE):
+
+ $smc\{[1/14] 2002-09-16 16:09:43 16RdAL-0006pc-00 rejected from [127.0.0.1] (ph10):
+ [2/14] syntax error in 'From' header when scanning for sender: missing or ma
+ [3\14] lformed local part in "<>" (envelope sender is <ph10@cam.example>)
+ [4\14] Recipients: ph10@some.domain.cam.example
+ [5\14] P Received: from [127.0.0.1] (ident=ph10)
+ [6\14] by xxxxx.cam.example with smtp (Exim 4.00)
+ [7\14] id 16RdAL-0006pc-00
+ [8\14] for ph10@cam.example; Mon, 16 Sep 2002 16:09:43 +0100
+ [9\14] F From: <>
+ [10\14] Subject: this is a test header
+ [11\14] X-something: this is another header
+ [12\14] I Message-Id: <E16RdAL-0006pc-00@xxxxx.cam.example>
+ [13\14] B Bcc:
+ [14/14] Date: Mon, 16 Sep 2002 16:09:43 +0100\}
+
+Log lines that are neither too long nor contain newlines are written to syslog
+without modification.
+
+If only syslog is being used, the Exim monitor is unable to provide a log tail
+display, unless syslog is routing 'mainlog' to a file on the local host and
+the environment variable EXIMON_LOG_FILE_PATH is set to tell the monitor
+where it is.
+
+
+
+Log line flags
+~~~~~~~~~~~~~~
+One line is written to the main log for each message received, and for each
+successful, unsuccessful, and delayed delivery. These lines can readily be
+picked out by the distinctive two-character flags that immediately follow the
+timestamp. The flags are:
+
+&&&
+`<=` message arrival
+`=>` normal message delivery
+`->` additional address in same delivery
+`\*>` delivery suppressed by %-N%
+`\*\*` delivery failed; address bounced
+`==` delivery deferred; temporary problem
+&&&
+
+
+
+Logging message reception
+~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,reception line]
+The format of the single-line entry in the main log that is written for every
+message received is shown in the basic example below, which is split over
+several lines in order to fit it on the page:
+
+ 2002-10-31 08:57:53 16ZCW1-0005MB-00 <= kryten@dwarf.fict.example
+ H=mailer.fict.example [192.168.123.123] U=exim
+ P=smtp S=5678 id=<incoming message id>
+
+The address immediately following ``<='' is the envelope sender address. A bounce
+message is shown with the sender address ``<>'', and if it is locally generated,
+this is followed by an item of the form
+
+ R=<message id>
+
+which is a reference to the message that caused the bounce to be sent.
+
+cindex:[HELO]
+cindex:[EHLO]
+For messages from other hosts, the H and U fields identify the remote host and
+record the RFC 1413 identity of the user that sent the message, if one was
+received. The number given in square brackets is the IP address of the sending
+host. If there is a single, unparenthesized host name in the H field, as
+above, it has been verified to correspond to the IP address (see the
+%host_lookup% option). If the name is in parentheses, it was the name quoted
+by the remote host in the SMTP HELO or EHLO command, and has not been
+verified. If verification yields a different name to that given for HELO or
+EHLO, the verified name appears first, followed by the HELO or EHLO
+name in parentheses.
+
+Misconfigured hosts (and mail forgers) sometimes put an IP address, with or
+without brackets, in the HELO or EHLO command, leading to entries in
+the log containing text like these examples:
+
+ H=(10.21.32.43) [192.168.8.34]
+ H=([10.21.32.43]) [192.168.8.34]
+
+This can be confusing. Only the final address in square brackets can be relied
+on.
+
+For locally generated messages (that is, messages not received over TCP/IP),
+the H field is omitted, and the U field contains the login name of the caller
+of Exim.
+
+cindex:[authentication,logging]
+cindex:[AUTH,logging]
+For all messages, the P field specifies the protocol used to receive the
+message. This is set to ``esmtpa'' for messages received from hosts that have
+authenticated themselves using the SMTP AUTH command. In this case there is an
+additional item A= followed by the name of the authenticator that was used. If
+an authenticated identification was set up by the authenticator's
+%server_set_id% option, this is logged too, separated by a colon from the
+authenticator name.
+
+The id field records the existing message id, if present.
+cindex:[size,of message]
+The size of the received message is given by the S field. When the message is
+delivered, headers may get removed or added, so that the size of delivered
+copies of the message may not correspond with this value (and indeed may be
+different to each other).
+
+The %log_selector% option can be used to request the logging of additional
+data when a message is received. See section <<SECTlogselector>> below.
+
+
+
+Logging deliveries
+~~~~~~~~~~~~~~~~~~
+cindex:[log,delivery line]
+The format of the single-line entry in the main log that is written for every
+delivery is shown in one of the examples below, for local and remote deliveries,
+respectively. Each example has been split into two lines in order to fit
+it on the page:
+
+ 2002-10-31 08:59:13 16ZCW1-0005MB-00 => marv <marv@hitch.fict.example>
+ R=localuser T=local_delivery
+ 2002-10-31 09:00:10 16ZCW1-0005MB-00 => monk@holistic.fict.example
+ R=dnslookup T=remote_smtp H=holistic.fict.example [192.168.234.234]
+
+For ordinary local deliveries, the original address is given in angle brackets
+after the final delivery address, which might be a pipe or a file. If
+intermediate address(es) exist between the original and the final address, the
+last of these is given in parentheses after the final address. The R and T
+fields record the router and transport that were used to process the address.
+
+If a shadow transport was run after a successful local delivery, the log line
+for the successful delivery has an item added on the end, of the form
+
+ ST=<shadow transport name>
+
+If the shadow transport did not succeed, the error message is put in
+parentheses afterwards.
+
+When more than one address is included in a single delivery (for example, two
+SMTP RCPT commands in one transaction) the second and subsequent
+addresses are flagged with `->` instead of `=>`. When two or more
+messages are delivered down a single SMTP connection, an asterisk follows the
+IP address in the log lines for the second and subsequent messages.
+
+The generation of a reply message by a filter file gets logged as a ``delivery''
+to the addressee, preceded by ``>''.
+
+The %log_selector% option can be used to request the logging of additional
+data when a message is delivered. See section <<SECTlogselector>> below.
+
+
+
+Discarded deliveries
+~~~~~~~~~~~~~~~~~~~~
+cindex:[discarded messages]
+cindex:[message,discarded]
+cindex:[delivery,discarded; logging]
+When a message is discarded as a result of the command ``seen finish'' being
+obeyed in a filter file which generates no deliveries, a log entry of the form
+
+ 2002-12-10 00:50:49 16auJc-0001UB-00 => discarded
+ <low.club@bridge.example> R=userforward
+
+is written, to record why no deliveries are logged. When a message is discarded
+because it is aliased to ``:blackhole:'' the log line is like this:
+
+ 1999-03-02 09:44:33 10HmaX-0005vi-00 => :blackhole:
+ <hole@nowhere.example> R=blackhole_router
+
+
+
+
+Deferred deliveries
+~~~~~~~~~~~~~~~~~~~
+When a delivery is deferred, a line of the following form is logged:
+
+ 2002-12-19 16:20:23 16aiQz-0002Q5-00 == marvin@endrest.example
+ R=dnslookup T=smtp defer (146): Connection refused
+
+In the case of remote deliveries, the error is the one that was given for the
+last IP address that was tried. Details of individual SMTP failures are also
+written to the log, so the above line would be preceded by something like
+
+ 2002-12-19 16:20:23 16aiQz-0002Q5-00 Failed to connect to
+ mail1.endrest.example [192.168.239.239]: Connection refused
+
+When a deferred address is skipped because its retry time has not been reached,
+a message is written to the log, but this can be suppressed by setting an
+appropriate value in %log_selector%.
+
+
+
+Delivery failures
+~~~~~~~~~~~~~~~~~
+cindex:[delivery,failure; logging]
+If a delivery fails because an address cannot be routed, a line of the
+following form is logged:
+
+ 1995-12-19 16:20:23 0tRiQz-0002Q5-00 ** jim@trek99.example
+ <jim@trek99.example>: unknown mail domain
+
+If a delivery fails at transport time, the router and transport are shown, and
+the response from the remote host is included, as in this example:
+
+ 2002-07-11 07:14:17 17SXDU-000189-00 ** ace400@pb.example R=dnslookup
+ T=remote_smtp: SMTP error from remote mailer after pipelined
+ RCPT TO:<ace400@pb.example>: host pbmail3.py.example
+ [192.168.63.111]: 553 5.3.0 <ace400@pb.example>...
+ Addressee unknown
+
+The word ``pipelined'' indicates that the SMTP PIPELINING extension was being
+used. See %hosts_avoid_esmtp% in the ^smtp^ transport for a way of
+disabling PIPELINING.
+
+The log lines for all forms of delivery failure are flagged with `\*\*`.
+
+
+
+Fake deliveries
+~~~~~~~~~~~~~~~
+cindex:[delivery,fake; logging]
+If a delivery does not actually take place because the %-N% option has been
+used to suppress it, a normal delivery line is written to the log, except that
+``=>'' is replaced by ``\*>''.
+
+
+
+Completion
+~~~~~~~~~~
+A line of the form
+
+ 2002-10-31 09:00:11 16ZCW1-0005MB-00 Completed
+
+is written to the main log when a message is about to be removed from the spool
+at the end of its processing.
+
+
+
+
+Summary of Fields in Log Lines
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,summary of fields]
+A summary of the field identifiers that are used in log lines is shown in
+the following table:
+
+&&&
+`A ` authenticator name (and optional id)
+`C ` SMTP confirmation on delivery
+`CV ` certificate verification status
+`DN ` distinguished name from peer certificate
+`DT ` on `=>` lines: time taken for a delivery
+`F ` sender address (on delivery lines)
+`H ` host name and IP address
+`I ` local interface used
+`id ` message id for incoming message
+`P ` on `<=` lines: protocol used
+` ` on `=>` and `\*\*` lines: return path
+`QT ` on `=>` lines: time spent on queue so far
+` ` on ``Completed'' lines: time spent on queue
+`R ` on `<=` lines: reference for local bounce
+` ` on `=>` `\*\*` and `==` lines: router name
+`S ` size of message
+`ST ` shadow transport name
+`T ` on `<=` lines: message subject (topic)
+` ` on `=>` `\*\*` and `==` lines: transport name
+`U ` local user or RFC 1413 identity
+`X ` TLS cipher suite
+&&&
+
+
+
+Other log entries
+~~~~~~~~~~~~~~~~~
+Various other types of log entry are written from time to time. Most should be
+self-explanatory. Among the more common are:
+
+- cindex:[retry,time not reached]
+'retry time not reached'~~An address previously suffered a temporary error
+during routing or local delivery, and the time to retry has not yet arrived.
+This message is not written to an individual message log file unless it happens
+during the first delivery attempt.
+
+- 'retry time not reached for any host'~~An address previously suffered
+temporary errors during remote delivery, and the retry time has not yet arrived
+for any of the hosts to which it is routed.
+
+- cindex:[spool directory,file locked]
+'spool file locked'~~An attempt to deliver a message cannot proceed because
+some other Exim process is already working on the message. This can be quite
+common if queue running processes are started at frequent intervals. The
+'exiwhat' utility script can be used to find out what Exim processes are
+doing.
+
+- cindex:[error,ignored]
+'error ignored'~~There are several circumstances that give rise to this
+message:
+
+. Exim failed to deliver a bounce message whose age was greater than
+%ignore_bounce_errors_after%. The bounce was discarded.
+
+. A filter file set up a delivery using the ``noerror'' option, and the delivery
+failed. The delivery was discarded.
+
+. A delivery set up by a router configured with
++
+ errors_to = <>
++
+failed. The delivery was discarded.
+
+
+
+
+
+[[SECTlogselector]]
+Reducing or increasing what is logged
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,selectors]
+By setting the %log_selector% global option, you can disable some of Exim's
+default logging, or you can request additional logging. The value of
+%log_selector% is made up of names preceded by plus or minus characters. For
+example:
+
+ log_selector = +arguments -retry_defer
+
+The list of optional log items is in the following table, with the default
+selection marked by asterisks:
+
+&&&
+` address_rewrite ` address rewriting
+` all_parents ` all parents in => lines
+` arguments ` command line arguments
+`\*connection_reject ` connection rejections
+`\*delay_delivery ` immediate delivery delayed
+` deliver_time ` time taken to perform delivery
+` delivery_size ` add S=nnn to => lines
+`\*dnslist_defer ` defers of DNS list (aka RBL) lookups
+`\*etrn ` ETRN commands
+`\*host_lookup_failed ` as it says
+` ident_timeout ` timeout for ident connection
+` incoming_interface ` incoming interface on <= lines
+` incoming_port ` incoming port on <= lines
+`\*lost_incoming_connection ` as it says (includes timeouts)
+` outgoing_port ` add remote port to => lines
+`\*queue_run ` start and end queue runs
+` queue_time ` time on queue for one recipient
+` queue_time_overall ` time on queue for whole message
+` received_recipients ` recipients on <= lines
+` received_sender ` sender on <= lines
+`\*rejected_header ` header contents on reject log
+`\*retry_defer ` ``retry time not reached''
+` return_path_on_delivery ` put return path on => and \*\ lines
+` sender_on_delivery ` add sender to => lines
+`\*size_reject ` rejection because too big
+`\*skip_delivery ` delivery skipped in a queue run
+` smtp_confirmation ` SMTP confirmation on => lines
+` smtp_connection ` SMTP connections
+` smtp_incomplete_transaction` incomplete SMTP transactions
+` smtp_protocol_error ` SMTP protocol errors
+` smtp_syntax_error ` SMTP syntax errors
+` subject ` contents of 'Subject:' on <= lines
+` tls_certificate_verified ` certificate verification status
+`\*tls_cipher ` TLS cipher suite on <= and => lines
+` tls_peerdn ` TLS peer DN on <= and => lines
+
+` all ` all of the above
+&&&
+
+More details on each of these items follows:
+
+- cindex:[log,rewriting]
+cindex:[rewriting,logging]
+%address_rewrite%: This applies both to global rewrites and per-transport
+rewrites,
+but not to rewrites in filters run as an unprivileged user (because such users
+cannot access the log).
+
+- cindex:[log,full parentage]
+%all_parents%: Normally only the original and final addresses are logged on
+delivery lines; with this selector, intermediate parents are given in
+parentheses between them.
+
+- cindex:[log,Exim arguments]
+cindex:[Exim arguments, logging]
+%arguments%: This causes Exim to write the arguments with which it was called
+to the main log, preceded by the current working directory. This is a debugging
+feature, added to make it easier to find out how certain MUAs call
+_/usr/sbin/sendmail_. The logging does not happen if Exim has given up root
+privilege because it was called with the %-C% or %-D% options. Arguments that
+are empty or that contain whitespace are quoted. Non-printing characters are
+shown as escape sequences. This facility cannot log unrecognized arguments,
+because the arguments are checked before the configuration file is read. The
+only way to log such cases is to interpose a script such as _util/logargs.sh_
+between the caller and Exim.
+
+- cindex:[log,connection rejections]
+%connection_reject%: A log entry is written whenever an incoming SMTP
+connection is rejected, for whatever reason.
+
+- cindex:[log,delayed delivery]
+cindex:[delayed delivery, logging]
+%delay_delivery%: A log entry is written whenever a delivery process is not
+started for an incoming message because the load is too high or too many
+messages were received on one connection. Logging does not occur if no delivery
+process is started because %queue_only% is set or %-odq% was used.
+
+- cindex:[log,delivery duration]
+%deliver_time%: For each delivery, the amount of real time it has taken to
+perform the actual delivery is logged as DT=<'time'>, for example, `DT=1s`.
+
+- cindex:[log,message size on delivery]
+cindex:[size,of message]
+%delivery_size%: For each delivery, the size of message delivered is added to
+the ``=>'' line, tagged with S=.
+
+- cindex:[log,dnslist defer]
+cindex:[DNS list,logging defer]
+cindex:[black list (DNS)]
+%dnslist_defer%: A log entry is written if an attempt to look up a host in a
+DNS black list suffers a temporary error.
+
+- cindex:[log,ETRN commands]
+cindex:[ETRN,logging]
+%etrn%: Every legal ETRN command that is received is logged, before the ACL is
+run to determine whether or not it is actually accepted. An invalid ETRN
+command, or one received within a message transaction is not logged by this
+selector (see %smtp_syntax_error% and %smtp_protocol_error%).
+
+- cindex:[log,host lookup failure]
+%host_lookup_failed%: When a lookup of a host's IP addresses fails to find
+any addresses, or when a lookup of an IP address fails to find a host name, a
+log line is written. This logging does not apply to direct DNS lookups when
+routing email addresses, but it does apply to ``byname'' lookups.
+
+- cindex:[log,ident timeout]
+cindex:[RFC 1413,logging timeout]
+%ident_timeout%: A log line is written whenever an attempt to connect to a
+client's ident port times out.
+
+- cindex:[log,incoming interface]
+cindex:[interface,logging]
+%incoming_interface%: The interface on which a message was received is added to
+the ``<='' line as an IP address in square brackets, tagged by I= and followed
+by a colon and the port number. The local interface and port are also added to
+other SMTP log lines, for example ``SMTP connection from'', and to rejection
+lines.
+
+- cindex:[log,incoming remote port]
+cindex:[port,logging remote]
+cindex:[TCP/IP,logging incoming remote port]
+%incoming_port%: The remote port number from which a message was received is
+added to log entries and 'Received:' header lines, following the IP address in
+square brackets, and separated from it by a colon. This is implemented by
+changing the value that is put in the $sender_fullhost$ and
+$sender_rcvhost$ variables. Recording the remote port number has become more
+important with the widening use of NAT (see RFC 2505).
+
+- cindex:[log,dropped connection]
+%lost_incoming_connection%: A log line is written when an incoming SMTP
+connection is unexpectedly dropped.
+
+- cindex:[log,outgoing remote port]
+cindex:[port,logging outgoint remote]
+cindex:[TCP/IP,logging ougtoing remote port]
+%outgoing_port%: The remote port number is added to delivery log lines (those
+containing => tags) following the IP address. This option is not included in
+the default setting, because for most ordinary configurations, the remote port
+number is always 25 (the SMTP port).
+
+- cindex:[log,queue run]
+cindex:[queue runner,logging]
+%queue_run%: The start and end of every queue run are logged.
+
+- cindex:[log,queue time]
+%queue_time%: The amount of time the message has been in the queue on the local
+host is logged as QT=<'time'> on delivery (`=>`) lines, for example,
+`QT=3m45s`. The clock starts when Exim starts to receive the message, so it
+includes reception time as well as the delivery time for the current address.
+This means that it may be longer than the difference between the arrival and
+delivery log line times, because the arrival log line is not written until the
+message has been successfully received.
+
+- %queue_time_overall%: The amount of time the message has been in the queue on
+the local host is logged as QT=<'time'> on ``Completed'' lines, for
+example, `QT=3m45s`. The clock starts when Exim starts to receive the
+message, so it includes reception time as well as the total delivery time.
+
+- cindex:[log,recipients]
+%received_recipients%: The recipients of a message are listed in the main log
+as soon as the message is received. The list appears at the end of the log line
+that is written when a message is received, preceded by the word ``for''. The
+addresses are listed after they have been qualified, but before any rewriting
+has taken place.
+Recipients that were discarded by an ACL for MAIL or RCPT do not appear
+in the list.
+
+- cindex:[log,sender reception]
+%received_sender%: The unrewritten original sender of a message is added to
+the end of the log line that records the message's arrival, after the word
+``from'' (before the recipients if %received_recipients% is also set).
+
+- cindex:[log,header lines for rejection]
+%rejected_header%: If a message's header has been received at the time a
+rejection is written to the reject log, the complete header is added to the
+log. Header logging can be turned off individually for messages that are
+rejected by the 'local_scan()' function (see section <<SECTapiforloc>>).
+
+- cindex:[log,retry defer]
+%retry_defer%: A log line is written if a delivery is deferred because a retry
+time has not yet been reached. However, this ``retry time not reached'' message
+is always omitted from individual message logs after the first delivery
+attempt.
+
+- cindex:[log,return path]
+%return_path_on_delivery%: The return path that is being transmitted with
+the message is included in delivery and bounce lines, using the tag P=.
+This is omitted if no delivery actually happens, for example, if routing fails,
+or if delivery is to _/dev/null_ or to `:blackhole:`.
+
+- cindex:[log,sender on delivery]
+%sender_on_delivery%: The message's sender address is added to every delivery
+and bounce line, tagged by F= (for ``from'').
+This is the original sender that was received with the message; it is not
+necessarily the same as the outgoing return path.
+
+- cindex:[log,size rejection]
+%size_reject%: A log line is written whenever a message is rejected because it
+is too big.
+
+- cindex:[log,frozen messages; skipped]
+cindex:[frozen messages,logging skipping]
+%skip_delivery%: A log line is written whenever a message is skipped during a
+queue run because it is frozen or because another process is already delivering
+it.
+cindex:[``spool file is locked'']
+The message that is written is ``spool file is locked''.
+
+- cindex:[log,smtp confirmation]
+cindex:[SMTP,logging confirmation]
+%smtp_confirmation%: The response to the final ``.'' in the SMTP dialogue for
+outgoing messages is added to delivery log lines in the form ``C="<''text'>"'. A
+number of MTAs (including Exim) return an identifying string in this response.
+
+- cindex:[log,SMTP connections]
+cindex:[SMTP,logging connections]
+%smtp_connection%: A log line is written whenever an SMTP connection is
+established or closed, unless the connection is from a host that matches
+%hosts_connection_nolog%. (In contrast, %lost_incoming_connection% applies only
+when the closure is unexpected.) This applies to connections from local
+processes that use %-bs% as well as to TCP/IP connections. If a connection is
+dropped in the middle of a message, a log line is always written, whether or
+not this selector is set, but otherwise nothing is written at the start and end
+of connections unless this selector is enabled.
++
+For TCP/IP connections to an Exim daemon, the current number of connections is
+included in the log message for each new connection, but note that the count is
+reset if the daemon is restarted.
+Also, because connections are closed (and the closure is logged) in
+subprocesses, the count may not include connections that have been closed but
+whose termination the daemon has not yet noticed. Thus, while it is possible to
+match up the opening and closing of connections in the log, the value of the
+logged counts may not be entirely accurate.
+
+- cindex:[log,SMTP transaction; incomplete]
+cindex:[SMTP,logging incomplete transactions]
+%smtp_incomplete_transaction%: When a mail transaction is aborted by
+RSET, QUIT, loss of connection, or otherwise, the incident is logged,
+and the message sender plus any accepted recipients are included in the log
+line. This can provide evidence of dictionary attacks.
+
+- cindex:[log,SMTP protocol error]
+cindex:[SMTP,logging protocol error]
+%smtp_protocol_error%: A log line is written for every SMTP protocol error
+encountered. Exim does not have perfect detection of all protocol errors
+because of transmission delays and the use of pipelining. If PIPELINING has
+been advertised to a client, an Exim server assumes that the client will use
+it, and therefore it does not count ``expected'' errors (for example, RCPT
+received after rejecting MAIL) as protocol errors.
+
+- cindex:[SMTP,logging syntax errors]
+cindex:[SMTP,syntax errors; logging]
+cindex:[SMTP,unknown command; logging]
+cindex:[log,unknown SMTP command]
+cindex:[log,SMTP syntax error]
+%smtp_syntax_error%: A log line is written for every SMTP syntax error
+encountered. An unrecognized command is treated as a syntax error. For an
+external connection, the host identity is given; for an internal connection
+using %-bs% the sender identification (normally the calling user) is given.
+
+- cindex:[log,subject]
+cindex:[subject, logging]
+%subject%: The subject of the message is added to the arrival log line,
+preceded by ``T='' (T for ``topic'', since S is already used for ``size'').
+Any MIME ``words'' in the subject are decoded. The %print_topbitchars% option
+specifies whether characters with values greater than 127 should be logged
+unchanged, or whether they should be rendered as escape sequences.
+
+- cindex:[log,certificate verification]
+%tls_certificate_verified%: An extra item is added to <= and => log lines
+when TLS is in use. The item is `CV=yes` if the peer's certificate was
+verified, and `CV=no` if not.
+
+- cindex:[log,TLS cipher]
+cindex:[TLS,logging cipher]
+%tls_cipher%: When a message is sent or received over an encrypted connection,
+the cipher suite used is added to the log line, preceded by X=.
+
+- cindex:[log,TLS peer DN]
+cindex:[TLS,logging peer DN]
+%tls_peerdn%: When a message is sent or received over an encrypted connection,
+and a certificate is supplied by the remote host, the peer DN is added to the
+log line, preceded by DN=.
+
+
+
+Message log
+~~~~~~~~~~~
+cindex:[message,log file for]
+cindex:[log,message log; description of]
+In addition to the general log files, Exim writes a log file for each message
+that it handles. The names of these per-message logs are the message ids, and
+
+cindex:[_msglog_ directory]
+they are kept in the _msglog_ sub-directory of the spool directory. Each
+message log contains copies of the log lines that apply to the message. This
+makes it easier to inspect the status of an individual message without having
+to search the main log. A message log is deleted when processing of the message
+is complete,
+
+cindex:[%preserve_message_logs%]
+unless %preserve_message_logs% is set, but this should be used only with
+great care because they can fill up your disk very quickly.
+
+On a heavily loaded system, it may be desirable to disable the use of
+per-message logs, in order to reduce disk I/O. This can be done by setting the
+%message_logs% option false.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPutils]]
+Exim utilities
+--------------
+cindex:[utilities]
+A number of utility scripts and programs are supplied with Exim and are
+described in this chapter. There is also the Exim Monitor, which is covered in
+the next chapter. The utilities described here are:
+
+[frame="none"]
+`2`8`30`40~
+,<<SECTfinoutwha>> , 'exiwhat' , list what Exim processes are doing
+,<<SECTgreptheque>> , 'exiqgrep' , grep the queue
+,<<SECTsumtheque>> , 'exiqsumm' , summarize the queue
+,<<SECTextspeinf>> , 'exigrep' , search the main log
+,<<SECTexipick>> , 'exipick' , select messages on various criteria
+,<<SECTcyclogfil>> , 'exicyclog' , cycle (rotate) log files
+,<<SECTmailstat>> , 'eximstats' , extract statistics from the log
+,<<SECTcheckaccess>> , 'exim_checkaccess', check address acceptance from given IP
+,<<SECTdbmbuild>> , 'exim_dbmbuild' , build a DBM file
+,<<SECTfinindret>> , 'exinext' , extract retry information
+,<<SECThindatmai>> , 'exim_dumpdb' , dump a hints database
+,<<SECThindatmai>> , 'exim_tidydb' , clean up a hints database
+,<<SECThindatmai>> , 'exim_fixdb' , patch a hints database
+,<<SECTmailboxmaint>>, 'exim_lock' , lock a mailbox file
+~~~~~
+
+
+[[SECTfinoutwha]]
+Finding out what Exim processes are doing (exiwhat)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['exiwhat']
+cindex:[process, querying]
+cindex:[SIGUSR1]
+On operating systems that can restart a system call after receiving a signal
+(most modern OS), an Exim process responds to the SIGUSR1 signal by writing
+a line describing what it is doing to the file _exim-process.info_ in the
+Exim spool directory. The 'exiwhat' script sends the signal to all Exim
+processes it can find, having first emptied the file. It then waits for one
+second to allow the Exim processes to react before displaying the results. In
+order to run 'exiwhat' successfully you have to have sufficient privilege to
+send the signal to the Exim processes, so it is normally run as root.
+
+*Warning*: This is not an efficient process. It is intended for occasional
+use by system administrators. It is not sensible, for example, to set up a
+script that sends SIGUSR1 signals to Exim processes at short intervals.
+
+
+Unfortunately, the 'ps' command that 'exiwhat' uses to find Exim processes
+varies in different operating systems. Not only are different options used,
+but the format of the output is different. For this reason, there are some
+system configuration options that configure exactly how 'exiwhat' works. If it
+doesn't seem to be working for you, check the following compile-time options:
+
+&&&
+`EXIWHAT_PS_CMD ` the command for running 'ps'
+`EXIWHAT_PS_ARG ` the argument for 'ps'
+`EXIWHAT_EGREP_ARG ` the argument for 'egrep' to select from 'ps' output
+`EXIWHAT_KILL_ARG ` the argument for the 'kill' command
+&&&
+
+An example of typical output from 'exiwhat' is
+
+ 164 daemon: -q1h, listening on port 25
+ 10483 running queue: waiting for 0tAycK-0002ij-00 (10492)
+ 10492 delivering 0tAycK-0002ij-00 to mail.ref.example [10.19.42.42]
+ (editor@ref.example)
+ 10592 handling incoming call from [192.168.243.242]
+ 10628 accepting a local non-SMTP message
+
+The first number in the output line is the process number. The third line has
+been split here, in order to fit it on the page.
+
+
+
+[[SECTgreptheque]]
+Selective queue listing (exiqgrep)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['exiqgrep']
+cindex:[queue,grepping]
+This utility is a Perl script contributed by Matt Hubbard. It runs
+
+ exim -bpu
+
+to obtain a queue listing with undelivered recipients only, and then greps the
+output to select messages that match given criteria. The following selection
+options are available:
+
+*-f*~<'regex'>::
+Match the sender address. The field that is tested is enclosed in angle
+brackets, so you can test for bounce messages with
+
+ exiqgrep -f '^<>$'
+
+*-r*~<'regex'>::
+Match a recipient address. The field that is tested is not enclosed in angle
+brackets.
+
+*-s*~<'regex'>::
+Match against the size field.
+
+*-y*~<'seconds'>::
+Match messages that are younger than the given time.
+
+*-o*~<'seconds'>::
+Match messages that are older than the given time.
+
+*-z*::
+Match only frozen messages.
+
+*-x*::
+Match only non-frozen messages.
+
+///
+End of list
+///
+
+The following options control the format of the output:
+
+*-c*::
+Display only the count of matching messages.
+
+*-l*::
+Long format -- display the full message information as output by Exim. This is
+the default.
+
+*-i*::
+Display message ids only.
+
+*-b*::
+Brief format -- one line per message.
+
+*-R*::
+Display messages in reverse order.
+
+///
+End of list
+///
+
+There is one more option, %-h%, which outputs a list of options.
+
+
+
+[[SECTsumtheque]]
+Summarising the queue (exiqsumm)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['exiqsumm']
+cindex:[queue,summary]
+The 'exiqsumm' utility is a Perl script which reads the output of 'exim
+-bp' and produces a summary of the messages on the queue. Thus, you use it by
+running a command such as
+
+ exim -bp | exiqsumm
+
+The output consists of one line for each domain that has messages waiting for
+it, as in the following example:
+
+ 3 2322 74m 66m msn.com.example
+
+Each line lists the number of
+pending deliveries for a domain, their total volume, and the length of time
+that the oldest and the newest messages have been waiting. Note that the number
+of pending deliveries is greater than the number of messages when messages
+have more than one recipient.
+
+A summary line is output at the end. By default the output is sorted on the
+domain name, but 'exiqsumm' has the options %-a% and %-c%, which cause the
+output to be sorted by oldest message and by count of messages, respectively.
+
+The output of 'exim -bp' contains the original addresses in the message, so
+this also applies to the output from 'exiqsumm'. No domains from addresses
+generated by aliasing or forwarding are included (unless the %one_time% option
+of the ^redirect^ router has been used to convert them into ``top level''
+addresses).
+
+
+
+
+[[SECTextspeinf]]
+Extracting specific information from the log (exigrep)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['exigrep']
+cindex:[log,extracts; grepping for]
+The 'exigrep' utility is a Perl script that searches one or more main log
+files for entries that match a given pattern. When it finds a match, it
+extracts all the log entries for the relevant message, not just those that
+match the pattern. Thus, 'exigrep' can extract complete log entries for a
+given message, or all mail for a given user, or for a given host, for example.
+
+If a matching log line is not associated with a specific message, it is always
+included in 'exigrep''s output.
+The usage is:
+
+ exigrep [-l] [-t<n>] <pattern> [<log file>] ...
+
+The %-t% argument specifies a number of seconds. It adds an additional
+condition for message selection. Messages that are complete are shown only if
+they spent more than <'n'> seconds on the queue.
+
+The %-l% flag means ``literal'', that is, treat all characters in the
+pattern as standing for themselves. Otherwise the pattern must be a Perl
+regular expression. The pattern match is case-insensitive. If no file names are
+given on the command line, the standard input is read.
+
+If the location of a 'zcat' command is known from the definition of
+ZCAT_COMMAND in _Local/Makefile_, 'exigrep' automatically passes any
+file whose name ends in COMPRESS_SUFFIX through 'zcat' as it searches
+it.
+
+
+[[SECTexipick]]
+Selecting messages by various criteria (exipick)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['exipick']
+John Jetmore's 'exipick' utility is included in the Exim distribution. It
+lists messages from the queue according to a variety of criteria. For details,
+run:
+
+ exipick --help
+
+
+
+
+[[SECTcyclogfil]]
+Cycling log files (exicyclog)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[log,cycling local files]
+cindex:[cycling logs]
+cindex:['exicyclog']
+The 'exicyclog' script can be used to cycle (rotate) 'mainlog' and
+'rejectlog' files. This is not necessary if only syslog is being used, or if
+you are using log files with datestamps in their names (see section
+<<SECTdatlogfil>>). Some operating systems have their own standard mechanisms for
+log cycling, and these can be used instead of 'exicyclog' if preferred.
+
+Each time 'exicyclog' is run the file names get ``shuffled down'' by one. If
+the main log file name is _mainlog_ (the default) then when 'exicyclog' is
+run _mainlog_ becomes _mainlog.01_, the previous _mainlog.01_ becomes
+_mainlog.02_ and so on, up to a limit which is set in the script, and which
+defaults to 10. Log files whose numbers exceed the limit are discarded. Reject
+logs are handled similarly.
+
+If the limit is greater than 99, the script uses 3-digit numbers such as
+_mainlog.001_, _mainlog.002_, etc. If you change from a number less than 99
+to one that is greater, or 'vice versa', you will have to fix the names of
+any existing log files.
+
+
+If no _mainlog_ file exists, the script does nothing. Files that ``drop off''
+the end are deleted. All files with numbers greater than 01 are compressed,
+using a compression command which is configured by the COMPRESS_COMMAND
+setting in _Local/Makefile_. It is usual to run 'exicyclog' daily from a
+root %crontab% entry of the form
+
+ 1 0 * * * su exim -c /usr/exim/bin/exicyclog
+
+assuming you have used the name ``exim'' for the Exim user. You can run
+'exicyclog' as root if you wish, but there is no need.
+
+
+
+[[SECTmailstat]]
+Mail statistics (eximstats)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[statistics]
+cindex:['eximstats']
+A Perl script called 'eximstats' is provided for extracting statistical
+information from log files. The output is either plain text, or HTML.
+Exim log files are also suported by the 'Lire' system produced by the
+LogReport Foundation (*http://www.logreport.org[]*).
+
+The 'eximstats' script has been hacked about quite a bit over time. The
+latest version is the result of some extensive revision by Steve Campbell. A
+lot of information is given by default, but there are options for suppressing
+various parts of it. Following any options, the arguments to the script are a
+list of files, which should be main log files. For example:
+
+ eximstats -nr /var/spool/exim/log/mainlog.01
+
+By default, 'eximstats' extracts information about the number and volume of
+messages received from or delivered to various hosts. The information is sorted
+both by message count and by volume, and the top fifty hosts in each category
+are listed on the standard output. Similar information, based on email
+addresses or domains instead of hosts can be requested by means of various
+options. For messages delivered and received locally, similar statistics are
+also produced per user.
+
+The output also includes total counts and statistics about delivery errors, and
+histograms showing the number of messages received and deliveries made in each
+hour of the day. A delivery with more than one address in its envelope (for
+example, an SMTP transaction with more than one RCPT command) is counted
+as a single delivery by 'eximstats'.
+
+Though normally more deliveries than receipts are reported (as messages may
+have multiple recipients), it is possible for 'eximstats' to report more
+messages received than delivered, even though the queue is empty at the start
+and end of the period in question. If an incoming message contains no valid
+recipients, no deliveries are recorded for it. A bounce message is handled as
+an entirely separate message.
+
+'eximstats' always outputs a grand total summary giving the volume and number
+of messages received and deliveries made, and the number of hosts involved in
+each case. It also outputs the number of messages that were delayed (that is,
+not completely delivered at the first attempt), and the number that had at
+least one address that failed.
+
+The remainder of the output is in sections that can be independently disabled
+or modified by various options. It consists of a summary of deliveries by
+transport, histograms of messages received and delivered per time interval
+(default per hour), information about the time messages spent on the queue,
+a list of relayed messages, lists of the top fifty sending hosts, local
+senders, destination hosts, and destination local users by count and by volume,
+and a list of delivery errors that occurred.
+
+The relay information lists messages that were actually relayed, that is, they
+came from a remote host and were directly delivered to some other remote host,
+without being processed (for example, for aliasing or forwarding) locally.
+
+There are quite a few options for 'eximstats' to control exactly what it
+outputs. These are documented in the Perl script itself, and can be extracted
+by running the command ^perldoc^ on the script. For example:
+
+ perldoc /usr/exim/bin/eximstats
+
+
+
+[[SECTcheckaccess]]
+Checking access policy (exim_checkaccess)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:['exim_checkaccess']
+cindex:[policy control,checking access]
+cindex:[checking access]
+The %-bh% command line argument allows you to run a fake SMTP session with
+debugging output, in order to check what Exim is doing when it is applying
+policy controls to incoming SMTP mail. However, not everybody is sufficiently
+familiar with the SMTP protocol to be able to make full use of %-bh%, and
+sometimes you just want to answer the question 'Does this address have
+access?' without bothering with any further details.
+
+The 'exim_checkaccess' utility is a ``packaged'' version of %-bh%. It takes
+two arguments, an IP address and an email address:
+
+ exim_checkaccess 10.9.8.7 A.User@a.domain.example
+
+The utility runs a call to Exim with the %-bh% option, to test whether the
+given email address would be accepted in a RCPT command in a TCP/IP
+connection from the host with the given IP address. The output of the utility
+is either the word ``accepted'', or the SMTP error response, for example:
+
+ Rejected:
+ 550 Relay not permitted
+
+When running this test, the utility uses `<>` as the envelope sender address
+for the MAIL command, but you can change this by providing additional
+options. These are passed directly to the Exim command. For example, to specify
+that the test is to be run with the sender address 'himself@there.example'
+you can use:
+
+....
+exim_checkaccess 10.9.8.7 A.User@a.domain.example \
+ -f himself@there.example
+....
+
+Note that these additional Exim command line items must be given after the two
+mandatory arguments.
+
+Because the %exim_checkaccess% uses %-bh%, it does not perform callouts while
+running its checks. You can run checks that include callouts by using %-bhc%,
+but this is not yet available in a ``packaged'' form.
+
+
+
+[[SECTdbmbuild]]
+Making DBM files (exim_dbmbuild)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[DBM,building dbm files]
+cindex:[building DBM files]
+cindex:['exim_dbmbuild']
+cindex:[lower casing]
+cindex:[binary zero,in lookup key]
+The 'exim_dbmbuild' program reads an input file containing keys and data in
+the format used by the ^lsearch^ lookup (see section <<SECTsinglekeylookups>>).
+It writes a DBM file using the lower-cased alias names as keys and the
+remainder of the information as data. The lower-casing can be prevented by
+calling the program with the %-nolc% option.
+
+A terminating zero is included as part of the key string. This is expected by
+the ^dbm^ lookup type. However, if the option %-nozero% is given,
+'exim_dbmbuild' creates files without terminating zeroes in either the key
+strings or the data strings. The ^dbmnz^ lookup type can be used with such
+files.
+
+The program requires two arguments: the name of the input file (which can be a
+single hyphen to indicate the standard input), and the name of the output file.
+It creates the output under a temporary name, and then renames it if all went
+well.
+
+cindex:[USE_DB]
+If the native DB interface is in use (USE_DB is set in a compile-time
+configuration file -- this is common in free versions of Unix) the two file
+names must be different, because in this mode the Berkeley DB functions create
+a single output file using exactly the name given. For example,
+
+ exim_dbmbuild /etc/aliases /etc/aliases.db
+
+reads the system alias file and creates a DBM version of it in
+_/etc/aliases.db_.
+
+In systems that use the 'ndbm' routines (mostly proprietary versions of Unix),
+two files are used, with the suffixes _.dir_ and _.pag_. In this
+environment, the suffixes are added to the second argument of
+'exim_dbmbuild', so it can be the same as the first. This is also the case
+when the Berkeley functions are used in compatibility mode (though this is not
+recommended), because in that case it adds a _.db_ suffix to the file name.
+
+If a duplicate key is encountered, the program outputs a warning, and when it
+finishes, its return code is 1 rather than zero, unless the %-noduperr% option
+is used. By default, only the first of a set of duplicates is used -- this
+makes it compatible with ^lsearch^ lookups. There is an option %-lastdup%
+which causes it to use the data for the last duplicate instead. There is also
+an option %-nowarn%, which stops it listing duplicate keys to %stderr%. For
+other errors, where it doesn't actually make a new file, the return code is 2.
+
+
+
+
+[[SECTfinindret]]
+Finding individual retry times (exinext)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[retry,times]
+cindex:['exinext']
+A utility called 'exinext' (mostly a Perl script) provides the ability to fish
+specific information out of the retry database. Given a mail domain (or a
+complete address), it looks up the hosts for that domain, and outputs any retry
+information for the hosts or for the domain. At present, the retry information
+is obtained by running 'exim_dumpdb' (see below) and post-processing the
+output. For example:
+
+ $ exinext piglet@milne.fict.example
+ kanga.milne.fict.example:192.168.8.1 error 146: Connection refused
+ first failed: 21-Feb-1996 14:57:34
+ last tried: 21-Feb-1996 14:57:34
+ next try at: 21-Feb-1996 15:02:34
+ roo.milne.fict.example:192.168.8.3 error 146: Connection refused
+ first failed: 20-Jan-1996 13:12:08
+ last tried: 21-Feb-1996 11:42:03
+ next try at: 21-Feb-1996 19:42:03
+ past final cutoff time
+
+You can also give 'exinext' a local part, without a domain, and it
+will give any retry information for that local part in your default domain.
+A message id can be used to obtain retry information pertaining to a specific
+message. This exists only when an attempt to deliver a message to a remote host
+suffers a message-specific error (see section <<SECToutSMTPerr>>). 'exinext' is
+not particularly efficient, but then it isn't expected to be run very often.
+
+The 'exinext' utility calls Exim to find out information such as the location
+of the spool directory. The utility has %-C% and %-D% options, which are
+passed on to the 'exim' commands. The first specifies an alternate Exim
+configuration file, and the second sets macros for use within the configuration
+file. These features are mainly to help in testing, but might also be useful in
+environments where more than one configuration file is in use.
+
+
+
+
+[[SECThindatmai]]
+Hints database maintenance (exim_dumpdb, exim_fixdb, exim_tidydb)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[hints database,maintenance]
+cindex:[maintaining Exim's hints database]
+Three utility programs are provided for maintaining the DBM files that Exim
+uses to contain its delivery hint information. Each program requires two
+arguments. The first specifies the name of Exim's spool directory, and the
+second is the name of the database it is to operate on. These are as
+follows:
+
+- 'retry': the database of retry information
+
+- 'wait-'<'transport name'>: databases of information about messages waiting
+for remote hosts
+
+- 'callout': the callout cache
+
+- 'misc': other hints data
+
+The 'misc' database is used for
+
+- Serializing ETRN runs (when %smtp_etrn_serialize% is set)
+
+- Serializing delivery to a specific host (when %serialize_hosts% is set in an
+^smtp^ transport)
+
+
+
+exim_dumpdb
+~~~~~~~~~~~
+cindex:['exim_dumpdb']
+The entire contents of a database are written to the standard output by the
+'exim_dumpdb' program, which has no options or arguments other than the
+spool and database names. For example, to dump the retry database:
+
+ exim_dumpdb /var/spool/exim retry
+
+Two lines of output are produced for each entry:
+
+ T:mail.ref.example:192.168.242.242 146 77 Connection refused
+ 31-Oct-1995 12:00:12 02-Nov-1995 12:21:39 02-Nov-1995 20:21:39 *
+
+The first item on the first line is the key of the record. It starts with one
+of the letters R, or T, depending on whether it refers to a routing or
+transport retry. For a local delivery, the next part is the local address; for
+a remote delivery it is the name of the remote host, followed by its failing IP
+address (unless %no_retry_include_ip_address% is set on the ^smtp^
+transport). If the remote port is not the standard one (port 25), it is added
+to the IP address. Then there follows an error code, an additional error code,
+and a textual description of the error.
+
+The three times on the second line are the time of first failure, the time of
+the last delivery attempt, and the computed time for the next attempt. The line
+ends with an asterisk if the cutoff time for the last retry rule has been
+exceeded.
+
+Each output line from 'exim_dumpdb' for the 'wait-''xxx' databases
+consists of a host name followed by a list of ids for messages that are or were
+waiting to be delivered to that host. If there are a very large number for any
+one host, continuation records, with a sequence number added to the host name,
+may be seen. The data in these records is often out of date, because a message
+may be routed to several alternative hosts, and Exim makes no effort to keep
+cross-references.
+
+
+
+exim_tidydb
+~~~~~~~~~~~
+cindex:['exim_tidydb']
+The 'exim_tidydb' utility program is used to tidy up the contents of the
+hints databases. If run with no options, it removes all records from a database
+that are more than 30 days old. The cutoff date can be altered by means of the
+%-t% option, which must be followed by a time. For example, to remove all
+records older than a week from the retry database:
+
+ exim_tidydb -t 7d /var/spool/exim retry
+
+Both the 'wait-''xxx' and 'retry' databases contain items that involve
+message ids. In the former these appear as data in records keyed by host --
+they were messages that were waiting for that host -- and in the latter they
+are the keys for retry information for messages that have suffered certain
+types of error. When 'exim_tidydb' is run, a check is made to ensure that
+message ids in database records are those of messages that are still on the
+queue. Message ids for messages that no longer exist are removed from
+'wait-''xxx' records, and if this leaves any records empty, they are
+deleted. For the 'retry' database, records whose keys are non-existent
+message ids are removed. The 'exim_tidydb' utility outputs comments on the
+standard output whenever it removes information from the database.
+
+Certain records are automatically removed by Exim when they are no longer
+needed, but others are not. For example, if all the MX hosts for a domain are
+down, a retry record is created for each one. If the primary MX host comes back
+first, its record is removed when Exim successfully delivers to it, but the
+records for the others remain because Exim has not tried to use those hosts.
+
+It is important, therefore, to run 'exim_tidydb' periodically on all the
+hints databases. You should do this at a quiet time of day, because it requires
+a database to be locked (and therefore inaccessible to Exim) while it does its
+work. Removing records from a DBM file does not normally make the file smaller,
+but all the common DBM libraries are able to re-use the space that is released.
+After an initial phase of increasing in size, the databases normally reach a
+point at which they no longer get any bigger, as long as they are regularly
+tidied.
+
+*Warning*: If you never run 'exim_tidydb', the space used by the hints
+databases is likely to keep on increasing.
+
+
+
+
+exim_fixdb
+~~~~~~~~~~
+cindex:['exim_fixdb']
+The 'exim_fixdb' program is a utility for interactively modifying databases.
+Its main use is for testing Exim, but it might also be occasionally useful for
+getting round problems in a live system. It has no options, and its interface
+is somewhat crude. On entry, it prompts for input with a right angle-bracket. A
+key of a database record can then be entered, and the data for that record is
+displayed.
+
+If ``d'' is typed at the next prompt, the entire record is deleted. For all
+except the 'retry' database, that is the only operation that can be carried
+out. For the 'retry' database, each field is output preceded by a number, and
+data for individual fields can be changed by typing the field number followed
+by new data, for example:
+
+ > 4 951102:1000
+
+resets the time of the next delivery attempt. Time values are given as a
+sequence of digit pairs for year, month, day, hour, and minute. Colons can be
+used as optional separators.
+
+
+
+
+[[SECTmailboxmaint]]
+Mailbox maintenance (exim_lock)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[mailbox,maintenance]
+cindex:['exim_lock']
+cindex:[locking mailboxes]
+The 'exim_lock' utility locks a mailbox file using the same algorithm as
+Exim. For a discussion of locking issues, see section <<SECTopappend>>.
+'Exim_lock' can be used to prevent any modification of a mailbox by Exim or
+a user agent while investigating a problem. The utility requires the name of
+the file as its first argument. If the locking is successful, the second
+argument is run as a command (using C's 'system()' function); if there is no
+second argument, the value of the SHELL environment variable is used; if this
+is unset or empty, _/bin/sh_ is run. When the command finishes, the mailbox
+is unlocked and the utility ends. The following options are available:
+
+*-fcntl*:: Use 'fcntl()' locking on the open mailbox.
+
+*-flock*:: Use 'flock()' locking on the open mailbox, provided the operating
+system supports it.
+
+*-interval*:: This must be followed by a number, which is a number of seconds;
+it sets the interval to sleep between retries (default 3).
+
+*-lockfile*:: Create a lock file before opening the mailbox.
+
+*-mbx*:: Lock the mailbox using MBX rules.
+
+*-q*:: Suppress verification output.
+
+*-retries*:: This must be followed by a number; it sets the number of times to
+try to get the lock (default 10).
+
+*-restore_time*:: This option causes %exim_lock% to restore the modified and
+read times to the locked file before exiting. This allows you to access a
+locked mailbox (for example, to take a backup copy) without disturbing the
+times that the user subsequently sees.
+
+*-timeout*:: This must be followed by a number, which is a number of seconds;
+it sets a timeout to be used with a blocking 'fcntl()' lock. If it is not set
+(the default), a non-blocking call is used.
+
+*-v*:: Generate verbose output.
+
+If none of %-fcntl%, %-flock%, %-lockfile% or %-mbx% are given, the default is
+to create a lock file and also to use 'fcntl()' locking on the mailbox, which
+is the same as Exim's default. The use of %-flock% or %-fcntl% requires that
+the file be writeable; the use of %-lockfile% requires that the directory
+containing the file be writeable. Locking by lock file does not last for ever;
+Exim assumes that a lock file is expired if it is more than 30 minutes old.
+
+The %-mbx% option can be used with either or both of %-fcntl% or %-flock%.
+It assumes %-fcntl% by default.
+MBX locking causes a shared lock to be taken out on the open mailbox, and an
+exclusive lock on the file _/tmp/._'n'.'m' where 'n' and 'm' are
+the device number and inode number of the mailbox file. When the locking is
+released, if an exclusive lock can be obtained for the mailbox, the file in
+_/tmp_ is deleted.
+
+The default output contains verification of the locking that takes place. The
+%-v% option causes some additional information to be given. The %-q% option
+suppresses all output except error messages.
+
+A command such as
+
+ exim_lock /var/spool/mail/spqr
+
+runs an interactive shell while the file is locked, whereas
+
+ exim_lock -q /var/spool/mail/spqr <<End
+ <some commands>
+ End
+
+runs a specific non-interactive sequence of commands while the file is locked,
+suppressing all verification output. A single command can be run by a command
+such as
+
+....
+exim_lock -q /var/spool/mail/spqr \
+ "cp /var/spool/mail/spqr /some/where"
+....
+
+Note that if a command is supplied, it must be entirely contained within the
+second argument -- hence the quotes.
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPeximon]]
+The Exim monitor
+----------------
+cindex:[monitor]
+cindex:[Exim monitor]
+cindex:[X-windows]
+cindex:['eximon']
+cindex:[Local/eximon.conf]
+cindex:[_exim_monitor/EDITME_]
+The Exim monitor is an application which displays in an X window information
+about the state of Exim's queue and what Exim is doing. An admin user can
+perform certain operations on messages from this GUI interface; however all
+such facilities are also available from the command line, and indeed, the
+monitor itself makes use of the command line to perform any actions requested.
+
+
+
+Running the monitor
+~~~~~~~~~~~~~~~~~~~
+The monitor is started by running the script called 'eximon'. This is a shell
+script that sets up a number of environment variables, and then runs the
+binary called _eximon.bin_. The default appearance of the monitor window can
+be changed by editing the _Local/eximon.conf_ file created by editing
+_exim_monitor/EDITME_. Comments in that file describe what the various
+parameters are for.
+
+The parameters that get built into the 'eximon' script can be overridden for a
+particular invocation by setting up environment variables of the same names,
+preceded by `EXIMON_`. For example, a shell command such as
+
+ EXIMON_LOG_DEPTH=400 eximon
+
+(in a Bourne-compatible shell) runs 'eximon' with an overriding setting of the
+LOG_DEPTH parameter. If EXIMON_LOG_FILE_PATH is set in the
+environment, it overrides the Exim log file configuration. This makes it
+possible to have 'eximon' tailing log data that is written to syslog, provided
+that MAIL.INFO syslog messages are routed to a file on the local host.
+
+X resources can be used to change the appearance of the window in the normal
+way. For example, a resource setting of the form
+
+ Eximon*background: gray94
+
+changes the colour of the background to light grey rather than white. The
+stripcharts are drawn with both the data lines and the reference lines in
+black. This means that the reference lines are not visible when on top of the
+data. However, their colour can be changed by setting a resource called
+``highlight'' (an odd name, but that's what the Athena stripchart widget uses).
+For example, if your X server is running Unix, you could set up lighter
+reference lines in the stripcharts by obeying
+
+ xrdb -merge <<End
+ Eximon*highlight: gray
+ End
+
+
+cindex:[admin user]
+In order to see the contents of messages on the queue, and to operate on them,
+'eximon' must either be run as root or by an admin user.
+
+The monitor's window is divided into three parts. The first contains one or
+more stripcharts and two action buttons, the second contains a ``tail'' of the
+main log file, and the third is a display of the queue of messages awaiting
+delivery, with two more action buttons. The following sections describe these
+different parts of the display.
+
+
+
+
+The stripcharts
+~~~~~~~~~~~~~~~
+cindex:[stripchart]
+The first stripchart is always a count of messages on the queue. Its name can
+be configured by setting QUEUE_STRIPCHART_NAME in the
+_Local/eximon.conf_ file. The remaining stripcharts are defined in the
+configuration script by regular expression matches on log file entries, making
+it possible to display, for example, counts of messages delivered to certain
+hosts or using certain transports. The supplied defaults display counts of
+received and delivered messages, and of local and SMTP deliveries. The default
+period between stripchart updates is one minute; this can be adjusted by a
+parameter in the _Local/eximon.conf_ file.
+
+The stripchart displays rescale themselves automatically as the value they are
+displaying changes. There are always 10 horizontal lines in each chart; the
+title string indicates the value of each division when it is greater than one.
+For example, ``x2'' means that each division represents a value of 2.
+
+It is also possible to have a stripchart which shows the percentage fullness of
+a particular disk partition, which is useful when local deliveries are confined
+to a single partition.
+
+cindex:[%statvfs% function]
+This relies on the availability of the 'statvfs()' function or equivalent in
+the operating system. Most, but not all versions of Unix that support Exim have
+this. For this particular stripchart, the top of the chart always represents
+100%, and the scale is given as ``x10%''. This chart is configured by setting
+SIZE_STRIPCHART and (optionally) SIZE_STRIPCHART_NAME in the
+_Local/eximon.conf_ file.
+
+
+
+
+Main action buttons
+~~~~~~~~~~~~~~~~~~~
+cindex:[size,of monitor window]
+cindex:[monitor window size]
+cindex:[window size]
+Below the stripcharts there is an action button for quitting the monitor. Next
+to this is another button marked ``Size''. They are placed here so that shrinking
+the window to its default minimum size leaves just the queue count stripchart
+and these two buttons visible. Pressing the ``Size'' button causes the window to
+expand to its maximum size, unless it is already at the maximum, in which case
+it is reduced to its minimum.
+
+When expanding to the maximum, if the window cannot be fully seen where it
+currently is, it is moved back to where it was the last time it was at full
+size. When it is expanding from its minimum size, the old position is
+remembered, and next time it is reduced to the minimum it is moved back there.
+
+The idea is that you can keep a reduced window just showing one or two
+stripcharts at a convenient place on your screen, easily expand it to show
+the full window when required, and just as easily put it back to what it was.
+The idea is copied from what the 'twm' window manager does for its
+'f.fullzoom' action. The minimum size of the window can be changed by setting
+the MIN_HEIGHT and MIN_WIDTH values in _Local/eximon.conf_.
+
+Normally, the monitor starts up with the window at its full size, but it can be
+built so that it starts up with the window at its smallest size, by setting
+START_SMALL=yes in _Local/eximon.conf_.
+
+
+
+The log display
+~~~~~~~~~~~~~~~
+cindex:[log,tail of; in monitor]
+The second section of the window is an area in which a display of the tail of
+the main log is maintained.
+To save space on the screen, the timestamp on each log line is shortened by
+removing the date and, if %log_timezone% is set, the timezone.
+The log tail is not available when the only destination for logging data is
+syslog, unless the syslog lines are routed to a local file whose name is passed
+to 'eximon' via the EXIMON_LOG_FILE_PATH environment variable.
+
+The log sub-window has a scroll bar at its lefthand side which can be used to
+move back to look at earlier text, and the up and down arrow keys also have a
+scrolling effect. The amount of log that is kept depends on the setting of
+LOG_BUFFER in _Local/eximon.conf_, which specifies the amount of memory
+to use. When this is full, the earlier 50% of data is discarded -- this is much
+more efficient than throwing it away line by line. The sub-window also has a
+horizontal scroll bar for accessing the ends of long log lines. This is the
+only means of horizontal scrolling; the right and left arrow keys are not
+available. Text can be cut from this part of the window using the mouse in the
+normal way. The size of this subwindow is controlled by parameters in the
+configuration file _Local/eximon.conf_.
+
+Searches of the text in the log window can be carried out by means of the ^R
+and ^S keystrokes, which default to a reverse and a forward search,
+respectively. The search covers only the text that is displayed in the window.
+It cannot go further back up the log.
+
+The point from which the search starts is indicated by a caret marker. This is
+normally at the end of the text in the window, but can be positioned explicitly
+by pointing and clicking with the left mouse button, and is moved automatically
+by a successful search. If new text arrives in the window when it is scrolled
+back, the caret remains where it is, but if the window is not scrolled back,
+the caret is moved to the end of the new text.
+
+Pressing ^R or ^S pops up a window into which the search text can be typed.
+There are buttons for selecting forward or reverse searching, for carrying out
+the search, and for cancelling. If the ``Search'' button is pressed, the search
+happens and the window remains so that further searches can be done. If the
+``Return'' key is pressed, a single search is done and the window is closed. If
+^C is typed the search is cancelled.
+
+The searching facility is implemented using the facilities of the Athena text
+widget. By default this pops up a window containing both ``search'' and ``replace''
+options. In order to suppress the unwanted ``replace'' portion for eximon, a
+modified version of the %TextPop% widget is distributed with Exim. However, the
+linkers in BSDI and HP-UX seem unable to handle an externally provided version
+of %TextPop% when the remaining parts of the text widget come from the standard
+libraries. The compile-time option EXIMON_TEXTPOP can be unset to cut out
+the modified %TextPop%, making it possible to build Eximon on these systems, at
+the expense of having unwanted items in the search popup window.
+
+
+
+The queue display
+~~~~~~~~~~~~~~~~~
+cindex:[queue,display in monitor]
+The bottom section of the monitor window contains a list of all messages that
+are on the queue, which includes those currently being received or delivered,
+as well as those awaiting delivery. The size of this subwindow is controlled by
+parameters in the configuration file _Local/eximon.conf_, and the frequency
+at which it is updated is controlled by another parameter in the same file --
+the default is 5 minutes, since queue scans can be quite expensive. However,
+there is an ``Update'' action button just above the display which can be used to
+force an update of the queue display at any time.
+
+When a host is down for some time, a lot of pending mail can build up for it,
+and this can make it hard to deal with other messages on the queue. To help
+with this situation there is a button next to ``Update'' called ``Hide''. If
+pressed, a dialogue box called ``Hide addresses ending with'' is put up. If you
+type anything in here and press ``Return'', the text is added to a chain of such
+texts, and if every undelivered address in a message matches at least one
+of the texts, the message is not displayed.
+
+If there is an address that does not match any of the texts, all the addresses
+are displayed as normal. The matching happens on the ends of addresses so, for
+example, 'cam.ac.uk' specifies all addresses in Cambridge, while
+'xxx@foo.com.example' specifies just one specific address. When any hiding
+has been set up, a button called ``Unhide'' is displayed. If pressed, it cancels
+all hiding. Also, to ensure that hidden messages do not get forgotten, a hide
+request is automatically cancelled after one hour.
+
+While the dialogue box is displayed, you can't press any buttons or do anything
+else to the monitor window. For this reason, if you want to cut text from the
+queue display to use in the dialogue box, you have to do the cutting before
+pressing the ``Hide'' button.
+
+The queue display contains, for each unhidden queued message, the length of
+time it has been on the queue, the size of the message, the message id, the
+message sender, and the first undelivered recipient, all on one line. If it is
+a bounce message, the sender is shown as ``<>''. If there is more than one
+recipient to which the message has not yet been delivered, subsequent ones are
+listed on additional lines, up to a maximum configured number, following which
+an ellipsis is displayed. Recipients that have already received the message are
+not shown.
+
+cindex:[frozen messages,display]
+If a message is frozen, an asterisk is displayed at the left-hand side.
+
+The queue display has a vertical scroll bar, and can also be scrolled by means
+of the arrow keys. Text can be cut from it using the mouse in the normal way.
+The text searching facilities, as described above for the log window, are also
+available, but the caret is always moved to the end of the text when the queue
+display is updated.
+
+
+
+The queue menu
+~~~~~~~~~~~~~~
+cindex:[queue,menu in monitor]
+If the %shift% key is held down and the left button is clicked when the mouse
+pointer is over the text for any message, an action menu pops up, and the first
+line of the queue display for the message is highlighted. This does not affect
+any selected text.
+
+If you want to use some other event for popping up the menu, you can set the
+MENU_EVENT parameter in _Local/eximon.conf_ to change the default, or
+set EXIMON_MENU_EVENT in the environment before starting the monitor. The
+value set in this parameter is a standard X event description. For example, to
+run eximon using %ctrl% rather than %shift% you could use
+
+ EXIMON_MENU_EVENT='Ctrl<Btn1Down>' eximon
+
+The title of the menu is the message id, and it contains entries which act as
+follows:
+
+- 'message log': The contents of the message log for the message are displayed in
+a new text window.
+
+- 'headers': Information from the spool file that contains the envelope
+information and headers is displayed in a new text window. See chapter
+<<CHAPspool>> for a description of the format of spool files.
+
+- 'body': The contents of the spool file containing the body of the message are
+displayed in a new text window. There is a default limit of 20,000 bytes to the
+amount of data displayed. This can be changed by setting the BODY_MAX
+option at compile time, or the EXIMON_BODY_MAX option at run time.
+
+- 'deliver message': A call to Exim is made using the %-M% option to request
+delivery of the message. This causes an automatic thaw if the message is
+frozen. The %-v% option is also set, and the output from Exim is displayed in
+a new text window. The delivery is run in a separate process, to avoid holding
+up the monitor while the delivery proceeds.
+
+- 'freeze message': A call to Exim is made using the %-Mf% option to request
+that the message be frozen.
+
+- cindex:[thawing messages]
+cindex:[unfreezing messages]
+cindex:[frozen messages,thawing]
+'thaw message': A call to Exim is made using the %-Mt% option to request that
+the message be thawed.
+
+- cindex:[delivery,forcing failure]
+'give up on msg': A call to Exim is made using the %-Mg% option to request
+that Exim gives up trying to deliver the message. A bounce message is generated
+for any remaining undelivered addresses.
+
+- 'remove message': A call to Exim is made using the %-Mrm% option to request
+that the message be deleted from the system without generating a bounce
+message.
+
+- 'add recipient': A dialog box is displayed into which a recipient address can
+be typed. If the address is not qualified and the QUALIFY_DOMAIN parameter
+is set in _Local/eximon.conf_, the address is qualified with that domain.
+Otherwise it must be entered as a fully qualified address. Pressing RETURN
+causes a call to Exim to be made using the %-Mar% option to request that an
+additional recipient be added to the message, unless the entry box is empty, in
+which case no action is taken.
+
+- 'mark delivered': A dialog box is displayed into which a recipient address can
+be typed. If the address is not qualified and the QUALIFY_DOMAIN parameter
+is set in _Local/eximon.conf_, the address is qualified with that domain.
+Otherwise it must be entered as a fully qualified address. Pressing RETURN
+causes a call to Exim to be made using the %-Mmd% option to mark the given
+recipient address as already delivered, unless the entry box is empty, in which
+case no action is taken.
+
+- 'mark all delivered': A call to Exim is made using the %-Mmad% option to mark
+all recipient addresses as already delivered.
+
+- 'edit sender': A dialog box is displayed initialized with the current sender's
+address. Pressing RETURN causes a call to Exim to be made using the %-Mes%
+option to replace the sender address, unless the entry box is empty, in which
+case no action is taken. If you want to set an empty sender (as in bounce
+messages), you must specify it as ``<>''. Otherwise, if the address is not
+qualified and the QUALIFY_DOMAIN parameter is set in
+_Local/eximon.conf_, the address is qualified with that domain.
+
+When a delivery is forced, a window showing the %-v% output is displayed. In
+other cases when a call to Exim is made, if there is any output from Exim (in
+particular, if the command fails) a window containing the command and the
+output is displayed. Otherwise, the results of the action are normally apparent
+from the log and queue displays. However, if you set ACTION_OUTPUT=yes in
+_Local/eximon.conf_, a window showing the Exim command is always opened, even
+if no output is generated.
+
+The queue display is automatically updated for actions such as freezing and
+thawing, unless ACTION_QUEUE_UPDATE=no has been set in
+_Local/eximon.conf_. In this case the ``Update'' button has to be used to force
+an update of the display after one of these actions.
+
+In any text window that is displayed as result of a menu action, the normal
+cut-and-paste facility is available, and searching can be carried out using ^R
+and ^S, as described above for the log tail window.
+
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPsecurity]]
+Security considerations
+-----------------------
+cindex:[security]
+This chapter discusses a number of issues concerned with security, some of
+which are also covered in other parts of this manual.
+
+For reasons that this author does not understand, some people have promoted
+Exim as a ``particularly secure'' mailer. Perhaps it is because of the existence
+of this chapter in the documentation. However, the intent of the chapter is
+simply to describe the way Exim works in relation to certain security concerns,
+not to make any specific claims about the effectiveness of its security as
+compared with other MTAs.
+
+What follows is a description of the way Exim is supposed to be. Best efforts
+have been made to try to ensure that the code agrees with the theory, but an
+absence of bugs can never be guaranteed. Any that are reported will get fixed
+as soon as possible.
+
+
+Building a more ``hardened'' Exim
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[security,build-time features]
+There are a number of build-time options that can be set in _Local/Makefile_
+to create Exim binaries that are ``harder'' to attack, in particular by a rogue
+Exim administrator who does not have the root password, or by someone who has
+penetrated the Exim (but not the root) account. These options are as follows:
+
+- ALT_CONFIG_PREFIX can be set to a string that is required to match the
+start of any file names used with the %-C% option. When it is set, these file
+names are also not allowed to contain the sequence ``/../''. (However, if the
+value of the %-C% option is identical to the value of CONFIGURE_FILE in
+_Local/Makefile_, Exim ignores %-C% and proceeds as usual.) There is no
+default setting for %ALT_CONFIG_PREFIX%.
++
+If the permitted configuration files are confined to a directory to
+which only root has access, this guards against someone who has broken
+into the Exim account from running a privileged Exim with an arbitrary
+configuration file, and using it to break into other accounts.
+
+- If ALT_CONFIG_ROOT_ONLY is defined, root privilege is retained for %-C%
+and %-D% only if the caller of Exim is root. Without it, the Exim user may
+also use %-C% and %-D% and retain privilege. Setting this option locks out
+the possibility of testing a configuration using %-C% right through message
+reception and delivery, even if the caller is root. The reception works, but by
+that time, Exim is running as the Exim user, so when it re-execs to regain
+privilege for the delivery, the use of %-C% causes privilege to be lost.
+However, root can test reception and delivery using two separate commands.
+ALT_CONFIG_ROOT_ONLY is not set by default.
+
+- If DISABLE_D_OPTION is defined, the use of the %-D% command line option
+is disabled.
+
+- FIXED_NEVER_USERS can be set to a colon-separated list of users that are
+never to be used for any deliveries. This is like the %never_users% runtime
+option, but it cannot be overridden; the runtime option adds additional users
+to the list. The default setting is ``root''; this prevents a non-root user who
+is permitted to modify the runtime file from using Exim as a way to get root.
+
+
+
+
+Root privilege
+~~~~~~~~~~~~~~
+cindex:[setuid]
+cindex:[root privilege]
+The Exim binary is normally setuid to root, which means that it gains root
+privilege (runs as root) when it starts execution. In some special cases (for
+example, when the daemon is not in use and there are no local deliveries), it
+may be possible to run Exim setuid to some user other than root. This is
+discussed in the next section. However, in most installations, root privilege
+is required for two things:
+
+- To set up a socket connected to the standard SMTP port (25) when initialising
+the listening daemon. If Exim is run from 'inetd', this privileged action is
+not required.
+
+- To be able to change uid and gid in order to read users' _.forward_ files and
+perform local deliveries as the receiving user or as specified in the
+configuration.
+
+It is not necessary to be root to do any of the other things Exim does, such as
+receiving messages and delivering them externally over SMTP, and it is
+obviously more secure if Exim does not run as root except when necessary.
+For this reason, a user and group for Exim to use must be defined in
+_Local/Makefile_. These are known as ``the Exim user'' and ``the Exim group''.
+Their values can be changed by the run time configuration, though this is not
+recommended. Often a user called 'exim' is used, but some sites use 'mail'
+or another user name altogether.
+
+Exim uses 'setuid()' whenever it gives up root privilege. This is a permanent
+abdication; the process cannot regain root afterwards. Prior to release 4.00,
+'seteuid()' was used in some circumstances, but this is no longer the case.
+
+After a new Exim process has interpreted its command line options, it changes
+uid and gid in the following cases:
+
+- cindex:[%-C% option]
+cindex:[%-D% option]
+If the %-C% option is used to specify an alternate configuration file, or if
+the %-D% option is used to define macro values for the configuration, and the
+calling process is not running as root or the Exim user, the uid and gid are
+changed to those of the calling process.
+However, if ALT_CONFIG_ROOT_ONLY is defined in _Local/Makefile_, only
+root callers may use %-C% and %-D% without losing privilege, and if
+DISABLE_D_OPTION is set, the %-D% option may not be used at all.
+
+- cindex:[%-be% option]
+cindex:[%-bf% option]
+cindex:[%-bF% option]
+If the expansion test option (%-be%) or one of the filter testing options
+(%-bf% or %-bF%) are used, the uid and gid are changed to those of the
+calling process.
+
+- If the process is not a daemon process or a queue runner process or a delivery
+process or a process for testing address routing (started with %-bt%), the uid
+and gid are changed to the Exim user and group. This means that Exim always
+runs under its own uid and gid when receiving messages. This also applies when
+testing address verification
+cindex:[%-bv% option]
+cindex:[%-bh% option]
+(the %-bv% option) and testing incoming message policy controls (the %-bh%
+option).
+
+- For a daemon, queue runner, delivery, or address testing process, the uid
+remains as root at this stage, but the gid is changed to the Exim group.
+
+///
+End of list
+///
+
+The processes that initially retain root privilege behave as follows:
+
+- A daemon process changes the gid to the Exim group and the uid to the Exim
+user after setting up one or more listening sockets. The 'initgroups()'
+function is called, so that if the Exim user is in any additional groups, they
+will be used during message reception.
+
+- A queue runner process retains root privilege throughout its execution. Its
+job is to fork a controlled sequence of delivery processes.
+
+- A delivery process retains root privilege throughout most of its execution,
+but any actual deliveries (that is, the transports themselves) are run in
+subprocesses which always change to a non-root uid and gid. For local
+deliveries this is typically the uid and gid of the owner of the mailbox; for
+remote deliveries, the Exim uid and gid are used. Once all the delivery
+subprocesses have been run, a delivery process changes to the Exim uid and gid
+while doing post-delivery tidying up such as updating the retry database and
+generating bounce and warning messages.
++
+While the recipient addresses in a message are being routed, the delivery
+process runs as root. However, if a user's filter file has to be processed,
+this is done in a subprocess that runs under the individual user's uid and
+gid. A system filter is run as root unless %system_filter_user% is set.
+
+- A process that is testing addresses (the %-bt% option) runs as root so that
+the routing is done in the same environment as a message delivery.
+
+
+
+
+[[SECTrunexiwitpri]]
+Running Exim without privilege
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cindex:[privilege, running without]
+cindex:[unprivileged running]
+cindex:[root privilege,running without]
+Some installations like to run Exim in an unprivileged state for more of its
+operation, for added security. Support for this mode of operation is provided
+by the global option %deliver_drop_privilege%. When this is set, the uid and
+gid are changed to the Exim user and group at the start of a delivery process
+(and also queue runner and address testing processes). This means that address
+routing is no longer run as root, and the deliveries themselves cannot change
+to any other uid.
+
+Leaving the binary setuid to root, but setting %deliver_drop_privilege% means
+that the daemon can still be started in the usual way, and it can respond
+correctly to SIGHUP because the re-invocation regains root privilege.
+
+An alternative approach is to make Exim setuid to the Exim user and also setgid
+to the Exim group.
+If you do this, the daemon must be started from a root process. (Calling
+Exim from a root process makes it behave in the way it does when it is setuid
+root.) However, the daemon cannot restart itself after a SIGHUP signal because
+it cannot regain privilege.
+
+It is still useful to set %deliver_drop_privilege% in this case, because it
+stops Exim from trying to re-invoke itself to do a delivery after a message has
+been received. Such a re-invocation is a waste of resources because it has no
+effect.
+
+If restarting the daemon is not an issue (for example, if %mua_wrapper% is set,
+or 'inetd' is being used instead of a daemon), having the binary setuid to the
+Exim user seems a clean approach, but there is one complication:
+
+In this style of operation, Exim is running with the real uid and gid set to
+those of the calling process, and the effective uid/gid set to Exim's values.
+Ideally, any association with the calling process' uid/gid should be dropped,
+that is, the real uid/gid should be reset to the effective values so as to
+discard any privileges that the caller may have. While some operating systems
+have a function that permits this action for a non-root effective uid, quite a
+number of them do not. Because of this lack of standardization, Exim does not
+address this problem at this time.
+
+For this reason, the recommended approach for ``mostly unprivileged'' running is
+to keep the Exim binary setuid to root, and to set %deliver_drop_privilege%.
+This also has the advantage of allowing a daemon to be used in the most
+straightforward way.
+
+If you configure Exim not to run delivery processes as root, there are a
+number of restrictions on what you can do:
+
+- You can deliver only as the Exim user/group. You should explicitly use the
+%user% and %group% options to override routers or local transports that
+normally deliver as the recipient. This makes sure that configurations that
+work in this mode function the same way in normal mode. Any implicit or
+explicit specification of another user causes an error.
+
+- Use of _.forward_ files is severely restricted, such that it is usually
+not worthwhile to include them in the configuration.
+
+- Users who wish to use _.forward_ would have to make their home directory and
+the file itself accessible to the Exim user. Pipe and append-to-file entries,
+and their equivalents in Exim filters, cannot be used. While they could be
+enabled in the Exim user's name, that would be insecure and not very useful.
+
+- Unless the local user mailboxes are all owned by the Exim user (possible in
+some POP3 or IMAP-only environments):
+
+* They must be owned by the Exim group and be writable by that group. This
+implies you must set %mode% in the appendfile configuration, as well as the
+mode of the mailbox files themselves.
+
+* You must set %no_check_owner%, since most or all of the files will not be
+owned by the Exim user.
+
+* You must set %file_must_exist%, because Exim cannot set the owner correctly
+on a newly created mailbox when unprivileged. This also implies that new
+mailboxes need to be created manually.
+
+These restrictions severely restrict what can be done in local deliveries.
+However, there are no restrictions on remote deliveries. If you are running a
+gateway host that does no local deliveries, setting %deliver_drop_privilege%
+gives more security at essentially no cost.
+
+If you are using the %mua_wrapper% facility (see chapter <<CHAPnonqueueing>>),
+%deliver_drop_privilege% is forced to be true.
+
+
+
+
+Delivering to local files
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Full details of the checks applied by ^appendfile^ before it writes to a file
+are given in chapter <<CHAPappendfile>>.
+
+
+
+IPv4 source routing
+~~~~~~~~~~~~~~~~~~~
+cindex:[source routing,in IP packets]
+cindex:[IP source routing]
+Many operating systems suppress IP source-routed packets in the kernel, but
+some cannot be made to do this, so Exim does its own check. It logs incoming
+IPv4 source-routed TCP calls, and then drops them. Things are all different in
+IPv6. No special checking is currently done.
+
+
+
+The VRFY, EXPN, and ETRN commands in SMTP
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Support for these SMTP commands is disabled by default. If required, they can
+be enabled by defining suitable ACLs.
+
+
+
+
+Privileged users
+~~~~~~~~~~~~~~~~
+cindex:[trusted user]
+cindex:[admin user]
+cindex:[privileged user]
+cindex:[user,trusted]
+cindex:[user,admin]
+Exim recognises two sets of users with special privileges. Trusted users are
+able to submit new messages to Exim locally, but supply their own sender
+addresses and information about a sending host. For other users submitting
+local messages, Exim sets up the sender address from the uid, and doesn't
+permit a remote host to be specified.
+
+cindex:[%-f% option]
+However, an untrusted user is permitted to use the %-f% command line option in
+the special form %-f <>% to indicate that a delivery failure for the message
+should not cause an error report. This affects the message's envelope, but it
+does not affect the 'Sender:' header. Untrusted users may also be permitted to
+use specific forms of address with the %-f% option by setting the
+%untrusted_set_sender% option.
+
+Trusted users are used to run processes that receive mail messages from some
+other mail domain and pass them on to Exim for delivery either locally, or over
+the Internet. Exim trusts a caller that is running as root, as the Exim user,
+as any user listed in the %trusted_users% configuration option, or under any
+group listed in the %trusted_groups% option.
+
+Admin users are permitted to do things to the messages on Exim's queue. They
+can freeze or thaw messages, cause them to be returned to their senders, remove
+them entirely, or modify them in various ways. In addition, admin users can run
+the Exim monitor and see all the information it is capable of providing, which
+includes the contents of files on the spool.
+
+cindex:[%-M% option]
+cindex:[%-q% option]
+By default, the use of the %-M% and %-q% options to cause Exim to attempt
+delivery of messages on its queue is restricted to admin users. This
+restriction can be relaxed by setting the %no_prod_requires_admin% option.
+Similarly, the use of %-bp% (and its variants) to list the contents of the
+queue is also restricted to admin users. This restriction can be relaxed by
+setting %no_queue_list_requires_admin%.
+
+Exim recognises an admin user if the calling process is running as root or as
+the Exim user or if any of the groups associated with the calling process is
+the Exim group. It is not necessary actually to be running under the Exim
+group. However, if admin users who are not root or the Exim user are to access
+the contents of files on the spool via the Exim monitor (which runs
+unprivileged), Exim must be built to allow group read access to its spool
+files.
+
+
+
+Spool files
+~~~~~~~~~~~
+cindex:[spool directory,files]
+Exim's spool directory and everything it contains is owned by the Exim user and
+set to the Exim group. The mode for spool files is defined in the
+_Local/Makefile_ configuration file, and defaults to 0640. This means that
+any user who is a member of the Exim group can access these files.
+
+
+
+Use of argv[0]
+~~~~~~~~~~~~~~
+Exim examines the last component of %argv[0]%, and if it matches one of a set
+of specific strings, Exim assumes certain options. For example, calling Exim
+with the last component of %argv[0]% set to ``rsmtp'' is exactly equivalent to
+calling it with the option %-bS%. There are no security implications in this.
+
+
+
+Use of %f formatting
+~~~~~~~~~~~~~~~~~~~~
+The only use made of ``%f'' by Exim is in formatting load average values. These
+are actually stored in integer variables as 1000 times the load average.
+Consequently, their range is limited and so therefore is the length of the
+converted output.
+
+
+
+Embedded Exim path
+~~~~~~~~~~~~~~~~~~
+Exim uses its own path name, which is embedded in the code, only when it needs
+to re-exec in order to regain root privilege. Therefore, it is not root when it
+does so. If some bug allowed the path to get overwritten, it would lead to an
+arbitrary program's being run as exim, not as root.
+
+
+
+Use of sprintf()
+~~~~~~~~~~~~~~~~
+cindex:['sprintf()']
+A large number of occurrences of ``sprintf'' in the code are actually calls to
+'string_sprintf()', a function that returns the result in malloc'd store.
+The intermediate formatting is done into a large fixed buffer by a function
+that runs through the format string itself, and checks the length of each
+conversion before performing it, thus preventing buffer overruns.
+
+The remaining uses of 'sprintf()' happen in controlled circumstances where
+the output buffer is known to be sufficiently long to contain the converted
+string.
+
+
+
+Use of debug_printf() and log_write()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Arbitrary strings are passed to both these functions, but they do their
+formatting by calling the function 'string_vformat()', which runs through
+the format string itself, and checks the length of each conversion.
+
+
+
+Use of strcat() and strcpy()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+These are used only in cases where the output buffer is known to be large
+enough to hold the result.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[[CHAPspool]]
+Format of spool files
+---------------------
+cindex:[format,spool files]
+cindex:[spool directory,format of files]
+cindex:[spool files, format of]
+cindex:[spool files, editing]
+A message on Exim's queue consists of two files, whose names are the message id
+followed by -D and -H, respectively. The data portion of the message is kept in
+the -D file on its own. The message's envelope, status, and headers are all
+kept in the -H file, whose format is described in this chapter. Each of these
+two files contains the final component of its own name as its first line. This
+is insurance against disk crashes where the directory is lost but the files
+themselves are recoverable.
+
+Some people are tempted into editing -D files in order to modify messages. You
+need to be extremely careful if you do this; it is not recommended and you are
+on your own if you do it. Here are some of the pitfalls:
+
+- You must use the 'exim_lock' utility to ensure that Exim does not try to
+deliver the message while you are fiddling with it. The lock is implemented
+by opening the -D file and taking out a write lock on it. If you update the
+file in place, the lock will be retained. If you write a new file and rename
+it, the lock will be lost at the instant of rename.
+
+- If you change the number of lines in the file, the value of
+$body_linecount$, which is stored in the -H file, will be incorrect.
+
+- If the message is in MIME format, you must take care not to break it.
+
+- If the message is cryptographically signed, any change will invalidate the
+signature.
+
+
+Files whose names end with -J may also be seen in the _input_ directory (or
+its subdirectories when %split_spool_directory% is set). These are journal
+files, used to record addresses to which the message has been delivered during
+the course of a delivery run. At the end of the run, the -H file is updated,
+and the -J file is deleted.
+
+
+Format of the -H file
+~~~~~~~~~~~~~~~~~~~~~
+cindex:[uid (user id),in spool file]
+cindex:[gid (group id),in spool file]
+The second line of the -H file contains the login name for the uid of the
+process that called Exim to read the message, followed by the numerical uid and
+gid. For a locally generated message, this is normally the user who sent the
+message. For a message received over TCP/IP, it is normally the Exim user.
+
+The third line of the file contains the address of the message's sender as
+transmitted in the envelope, contained in angle brackets. The sender address is
+empty for bounce messages. For incoming SMTP mail, the sender address is given
+in the MAIL command. For locally generated mail, the sender address is
+created by Exim from the login name of the current user and the configured
+%qualify_domain%. However, this can be overridden by the %-f% option or a
+leading ``From'' line if the caller is trusted, or if the supplied address is
+``<>'' or an address that matches %untrusted_set_senders%.
+
+The fourth line contains two numbers. The first is the time that the message
+was received, in the conventional Unix form -- the number of seconds since the
+start of the epoch. The second number is a count of the number of messages
+warning of delayed delivery that have been sent to the sender.
+
+There follow a number of lines starting with a hyphen. These can appear in any
+order, and are omitted when not relevant:
+
+%-acl% <'number'> <'length'>::
+A line of this form is present for every ACL variable that is not empty. The
+number identifies the variable; the %acl_c%*x* variables are numbered 0--9 and
+the %acl_m%*x* variables are numbered 10--19. The length is the length of the
+data string for the variable. The string itself starts at the beginning of the
+next line, and is followed by a newline character. It may contain internal
+newlines.
+
+%-active_hostname% <'hostname'>::
+This is present if, when the message was received over SMTP, the value of
+$smtp_active_hostname$ was different to the value of $primary_hostname$.
+
+%-allow_unqualified_recipient%::
+This is present if unqualified recipient addresses are permitted in header
+lines (to stop such addresses from being qualified if rewriting occurs at
+transport time). Local messages that were input using %-bnq% and remote
+messages from hosts that match %recipient_unqualified_hosts% set this flag.
+
+%-allow_unqualified_sender%::
+This is present if unqualified sender addresses are permitted in header lines
+(to stop such addresses from being qualified if rewriting occurs at transport
+time). Local messages that were input using %-bnq% and remote messages from
+hosts that match %sender_unqualified_hosts% set this flag.
+
+%-auth_id% <'text'>::
+The id information for a message received on an authenticated SMTP connection
+-- the value of the $authenticated_id$ variable.
+
+%-auth_sender% <'address'>::
+The address of an authenticated sender -- the value of the
+$authenticated_sender$ variable.
+
+%-body_linecount% <'number'>::
+This records the number of lines in the body of the message, and is always
+present.
+
+%-body_zerocount% <'number'>::
+This records the number of binary zero bytes in the body of the message, and is
+present if the number is greater than zero.
+
+%-deliver_firsttime%::
+This is written when a new message is first added to the spool. When the spool
+file is updated after a deferral, it is omitted.
+
+%-frozen% <'time'>::
+cindex:[frozen messages,spool data]
+The message is frozen, and the freezing happened at <'time'>.
+
+%-helo_name% <'text'>::
+This records the host name as specified by a remote host in a HELO or EHLO
+command.
+
+%-host_address% <'address'>.<'port'>::
+This records the IP address of the host from which the message was received and
+the remote port number that was used. It is omitted for locally generated
+messages.
+
+%-host_auth% <'text'>::
+If the message was received on an authenticated SMTP connection, this records
+the name of the authenticator -- the value of the $sender_host_authenticated$
+variable.
+
+%-host_lookup_failed%::
+This is present if an attempt to look up the sending host's name from its IP
+address failed. It corresponds to the $host_lookup_failed$ variable.
+
+%-host_name% <'text'>::
+cindex:[reverse DNS lookup]
+cindex:[DNS,reverse lookup]
+This records the name of the remote host from which the message was received,
+if the host name was looked up from the IP address when the message was being
+received. It is not present if no reverse lookup was done.
+
+%-ident% <'text'>::
+For locally submitted messages, this records the login of the originating user,
+unless it was a trusted user and the %-oMt% option was used to specify an ident
+value. For messages received over TCP/IP, this records the ident string
+supplied by the remote host, if any.
+
+%-interface_address% <'address'>.<'port'>::
+This records the IP address of the local interface and the port number through
+which a message was received from a remote host. It is omitted for locally
+generated messages.
+
+%-local%::
+The message is from a local sender.
+
+%-localerror%::
+The message is a locally-generated bounce message.
+
+%-local_scan% <'string'>::
+This records the data string that was returned by the 'local_scan()' function
+when the message was received -- the value of the $local_scan_data$ variable.
+It is omitted if no data was returned.
+
+%-manual_thaw%::
+The message was frozen but has been thawed manually, that is, by an explicit
+Exim command rather than via the auto-thaw process.
+
+%-N%::
+A testing delivery process was started using the %-N% option to suppress any
+actual deliveries, but delivery was deferred. At any further delivery attempts,
+%-N% is assumed.
+
+%-received_protocol%::
+This records the value of the $received_protocol$ variable, which contains the
+name of the protocol by which the message was received.
+
+%-sender_set_untrusted%::
+The envelope sender of this message was set by an untrusted local caller (used
+to ensure that the caller is displayed in queue listings).
+
+%-spam_score_int% <'number'>::
+If a message was scanned by SpamAssassin, this is present. It records the value
+of $spam_score_int$.
+
+%-tls_certificate_verified%::
+A TLS certificate was received from the client that sent this message, and the
+certificate was verified by the server.
+
+%-tls_cipher% <'cipher name'>::
+When the message was received over an encrypted connection, this records the
+name of the cipher suite that was used.
+
+%-tls_peerdn% <'peer DN'>::
+When the message was received over an encrypted connection, and a certificate
+was received from the client, this records the Distinguished Name from that
+certificate.
+
+///
+End of list
+///
+
+Following the options there is a list of those addresses to which the message
+is not to be delivered. This set of addresses is initialized from the command
+line when the %-t% option is used and %extract_addresses_remove_arguments%
+is set; otherwise it starts out empty. Whenever a successful delivery is made,
+the address is added to this set. The addresses are kept internally as a
+balanced binary tree, and it is a representation of that tree which is written
+to the spool file. If an address is expanded via an alias or forward file, the
+original address is added to the tree when deliveries to all its child
+addresses are complete.
+
+If the tree is empty, there is a single line in the spool file containing just
+the text ``XX''. Otherwise, each line consists of two letters, which are either
+Y or N, followed by an address. The address is the value for the node of the
+tree, and the letters indicate whether the node has a left branch and/or a
+right branch attached to it, respectively. If branches exist, they immediately
+follow. Here is an example of a three-node tree:
+
+ YY darcy@austen.fict.example
+ NN alice@wonderland.fict.example
+ NN editor@thesaurus.ref.example
+
+After the non-recipients tree, there is a list of the message's recipients.
+This is a simple list, preceded by a count. It includes all the original
+recipients of the message, including those to whom the message has already been
+delivered. In the simplest case, the list contains one address per line. For
+example:
+
+ 4
+ editor@thesaurus.ref.example
+ darcy@austen.fict.example
+ rdo@foundation
+ alice@wonderland.fict.example
+
+However, when a child address has been added to the top-level addresses as a
+result of the use of the %one_time% option on a ^redirect^ router, each line
+is of the following form:
+
+&&&
+<'top-level address'> <'errors_to address'> <'length'>,<'parent number'>#<'flag bits'>
+&&&
+
+The 01 flag bit indicates the presence of the three other fields that follow
+the top-level address. Other bits may be used in future to support additional
+fields. The <'parent number'> is the offset in the recipients list of the
+original parent of the ``one time'' address. The first two fields are the
+envelope sender that is associated with this address and its length. If the
+length is zero, there is no special envelope sender (there are then two space
+characters in the line). A non-empty field can arise from a ^redirect^ router
+that has an %errors_to% setting.
+
+
+A blank line separates the envelope and status information from the headers
+which follow. A header may occupy several lines of the file, and to save effort
+when reading it in, each header is preceded by a number and an identifying
+character. The number is the number of characters in the header, including any
+embedded newlines and the terminating newline. The character is one of the
+following:
+
+[frame="none"]
+`-`--------`----------------------------------------------
+ <'blank'>header in which Exim has no special interest
+ `B` 'Bcc:' header
+ `C` 'Cc:' header
+ `F` 'From:' header
+ `I` 'Message-id:' header
+ `P` 'Received:' header -- P for ``postmark''
+ `R` 'Reply-To:' header
+ `S` 'Sender:' header
+ `T` 'To:' header
+ `*` replaced or deleted header
+----------------------------------------------------------
+
+Deleted or replaced (rewritten) headers remain in the spool file for debugging
+purposes. They are not transmitted when the message is delivered. Here is a
+typical set of headers:
+
+ 111P Received: by hobbit.fict.example with local (Exim 4.00)
+ id 14y9EI-00026G-00; Fri, 11 May 2001 10:28:59 +0100
+ 049 Message-Id: <E14y9EI-00026G-00@hobbit.fict.example>
+ 038* X-rewrote-sender: bb@hobbit.fict.example
+ 042* From: Bilbo Baggins <bb@hobbit.fict.example>
+ 049F From: Bilbo Baggins <B.Baggins@hobbit.fict.example>
+ 099* To: alice@wonderland.fict.example, rdo@foundation,
+ darcy@austen.fict.example, editor@thesaurus.ref.example
+ 109T To: alice@wonderland.fict.example, rdo@foundation.fict.example,
+ darcy@austen.fict.example, editor@thesaurus.ref.example
+ 038 Date: Fri, 11 May 2001 10:28:59 +0100
+
+The asterisked headers indicate that the envelope sender, 'From:' header, and
+'To:' header have been rewritten, the last one because routing expanded the
+unqualified domain 'foundation'.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[titleabbrev="Adding drivers or lookups"]
+Adding new drivers or lookup types
+----------------------------------
+cindex:[adding drivers]
+cindex:[new drivers, adding]
+cindex:[drivers,adding new]
+The following actions have to be taken in order to add a new router, transport,
+authenticator, or lookup type to Exim:
+
+. Choose a name for the driver or lookup type that does not conflict with any
+existing name; I will use ``newdriver'' in what follows.
+
+. Add to _src/EDITME_ the line
++
+ <type>_NEWDRIVER=yes
++
+where <'type'> is ROUTER, TRANSPORT, AUTH, or LOOKUP. If the
+code is not to be included in the binary by default, comment this line out. You
+should also add any relevant comments about the driver or lookup type.
+
+. Add to _src/config.h.defaults_ the line
++
+ #define <type>_NEWDRIVER
+
+. Edit _src/drtables.c_, adding conditional code to pull in the private header
+and create a table entry as is done for all the other drivers and lookup types.
+
+. Edit _Makefile_ in the appropriate sub-directory (_src/routers_,
+_src/transports_, _src/auths_, or _src/lookups_); add a line for the new
+driver or lookup type and add it to the definition of OBJ.
+
+. Create _newdriver.h_ and _newdriver.c_ in the appropriate sub-directory of
+_src_.
+
+. Edit _scripts/MakeLinks_ and add commands to link the _.h_ and _.c_ files
+as for other drivers and lookups.
+
+Then all you need to do is write the code! A good way to start is to make a
+proforma by copying an existing module of the same type, globally changing all
+occurrences of the name, and cutting out most of the code. Note that any
+options you create must be listed in alphabetical order, because the tables are
+searched using a binary chop procedure.
+
+There is a _README_ file in each of the sub-directories of _src_ describing
+the interface that is expected.
+
+
+
+
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+
+[title="Option index",role="option"]
+Index
+-----
+
+[title="Concept index",role="concept"]
+Index
+-----
+
+///////////////////////////////////////////////////////////////////////////////
+Nothing needs to be included here except "Index" as pseudo chapter headings.
+///////////////////////////////////////////////////////////////////////////////
diff --git a/doc/doc-docbook/x2man b/doc/doc-docbook/x2man
new file mode 100755
index 000000000..a9812239e
--- /dev/null
+++ b/doc/doc-docbook/x2man
@@ -0,0 +1,212 @@
+#! /usr/bin/perl -w
+
+# $Cambridge: exim/doc/doc-docbook/x2man,v 1.1 2005/06/16 10:32:31 ph10 Exp $
+
+# Script to find the command line options in the DocBook source of the Exim
+# spec, and turn them into a man page, because people like that.
+
+
+
+
+##################################################
+# Main Program #
+##################################################
+
+open(IN, "spec.xml") || die "Can't open spec.xml\n";
+open(OUT, ">exim.8" ) || die "Can't open exim.8\n";
+
+print OUT <<End;
+.TH EXIM 8
+.SH NAME
+exim \\- a Mail Transfer Agent
+.SH SYNOPSIS
+.B exim [options] arguments ...
+.br
+.B mailq [options] arguments ...
+.br
+.B rsmtp [options] arguments ...
+.br
+.B rmail [options] arguments ...
+.br
+.B runq [options] arguments ...
+.br
+.B newaliases [options] arguments ...
+
+.SH DESCRIPTION
+.rs
+.sp
+Exim is a mail transfer agent (MTA) developed at the University of Cambridge.
+It is a large program with very many facilities. For a full specification, see
+the reference manual. This man page contains only a description of the command
+line options. It has been automatically generated from the reference manual
+source, hopefully without too much mangling.
+
+.SH SETTING OPTIONS BY PROGRAM NAME
+.rs
+.TP 10
+\\fBmailq\\fR
+Behave as if the option \\fB\\-bp\\fP were present before any other options.
+The \\fB\\-bp\\fP option requests a listing of the contents of the mail queue
+on the standard output.
+.TP
+\\fBrsmtp\\fR
+Behaves as if the option \\fB\\-bS\\fP were present before any other options,
+for compatibility with Smail. The \\fB\\-bS\\fP option is used for reading in a
+number of messages in batched SMTP format.
+.TP
+\\fBrmail\\fR
+Behave as if the \\fB\\-i\\fP and \\fB\\-oee\\fP options were present before
+any other options, for compatibility with Smail. The name \\fBrmail\\fR is used
+as an interface by some UUCP systems. The \\fB\\-i\\fP option specifies that a
+dot on a line by itself does not terminate a non\\-SMTP message; \\fB\\-oee\\fP
+requests that errors detected in non\\-SMTP messages be reported by emailing
+the sender.
+.TP
+\\fBrunq\\fR
+Behave as if the option \\fB\\-q\\fP were present before any other options, for
+compatibility with Smail. The \\fB\\-q\\fP option causes a single queue runner
+process to be started. It processes the queue once, then exits.
+.TP
+\\fBnewaliases\\fR
+Behave as if the option \\fB\\-bi\\fP were present before any other options,
+for compatibility with Sendmail. This option is used for rebuilding Sendmail's
+alias file. Exim does not have the concept of a single alias file, but can be
+configured to run a specified command if called with the \\fB\\-bi\\fP option.
+
+.SH OPTIONS
+.rs
+End
+
+while (<IN>) { last if /^<!-- === Start of command line options === -->\s*$/; }
+die "Can't find start of options\n" if ! defined $_;
+
+$optstart = 0;
+$indent = "";
+
+# Loop for each individual option
+
+$next = <IN>;
+
+while ($next)
+ {
+ $_ = $next;
+ $next = <IN>;
+
+ last if /^<!-- === End of command line options === -->\s*$/;
+
+ # Start of new option
+
+ if (/^<term>$/)
+ {
+ print OUT ".TP 10\n";
+ $optstart = 1;
+ next;
+ }
+
+ # If a line contains text that is not in <>, read subsequent lines of the
+ # same form, so that we get whole sentences for matching on references.
+
+ if (/^ (?> (<[^>]+>)* ) \s*\S/x)
+ {
+ while ($next =~ /^ (?> (<[^>]+>)* ) \s*\S/x)
+ {
+ $_ .= $next;
+ $next = <IN>;
+ }
+ }
+
+ # Remove sentences or parenthetical comments that refer to chapters or
+ # sections. The order of these changes is very important:
+ #
+ # (1) Remove any parenthetical comments first.
+ # (2) Then remove any sentences that start after a full stop.
+ # (3) Then remove any sentences that start at the beginning or a newline.
+
+ s/\s?\( [^()]+ <xref \s linkend="[^"]+" \/ > \)//xg;
+ s/\s?\. [^.]+ <xref \s linkend="[^"]+" \/ > [^.]*? \././xg;
+ s/(^|\n) [^.]+ <xref \s linkend="[^"]+" \/ > [^.]*? \./$1/xg;
+
+ # Handle paragraph starts; skip the first one encountered for an option
+
+ if ($optstart && /<(sim)?para>/)
+ {
+ s/<(sim)?para>//;
+ $optstart = 0;
+ }
+
+ # Literal layout needs to be treated as a paragraph, and indented
+
+ if (/<literallayout/)
+ {
+ s/<literallayout[^>]*>/.P/;
+ $indent = " ";
+ }
+
+ $indent = "" if (/<\/literallayout>/);
+
+ # Others get marked
+
+ s/<para>/.P/;
+ s/<simpara>/.P/;
+
+ # Skip index entries
+
+ s/<primary>.*?<\/primary>//g;
+ s/<secondary>.*?<\/secondary>//g;
+
+ # Convert all occurrences of backslash into \e
+
+ s/\\/\\e/g;
+
+ # Handle bold and italic
+
+ s/<emphasis>/\\fI/g;
+ s/<emphasis role="bold">/\\fB/g;
+ s/<\/emphasis>/\\fP/g;
+
+ s/<option>/\\fB/g;
+ s/<\/option>/\\fP/g;
+
+ s/<varname>/\\fI/g;
+ s/<\/varname>/\\fP/g;
+
+ # Handle quotes
+
+ s/<\/?quote>/"/g;
+
+ # Remove any remaining XML markup
+
+ s/<[^>]*>//g;
+
+ # If nothing left in the line, ignore.
+
+ next if /^\s*$/;
+
+ # It turns out that we don't actually want .P; a blank line is needed.
+ # But we can't set that above, because it will be discarded.
+
+ s/^\.P\s*$/\n/;
+
+ # We are going to output some data; sort out special characters
+
+ s/&lt;/</g;
+ s/&gt;/>/g;
+
+ s/&#x002d;/-/g;
+ s/&#x00a0;/ /g;
+ s/&#x2013;/-/g;
+ s/&#x2019;/'/g;
+ s/&#8230;/.../g; # Sic - no x
+
+ # Escape hyphens to prevent unwanted hyphenation
+
+ s/-/\\-/g;
+
+ # Put in the indent, and write the line
+
+ s/^/$indent/mg;
+
+ print OUT;
+ }
+
+# End of g2man
diff --git a/doc/doc-scripts/ABOUT b/doc/doc-scripts/ABOUT
index 623e88c2e..7731de2e1 100644
--- a/doc/doc-scripts/ABOUT
+++ b/doc/doc-scripts/ABOUT
@@ -1,9 +1,12 @@
-$Cambridge: exim/doc/doc-scripts/ABOUT,v 1.1 2004/10/08 10:38:48 ph10 Exp $
+$Cambridge: exim/doc/doc-scripts/ABOUT,v 1.2 2005/06/16 10:32:31 ph10 Exp $
CVS directory exim/exim-doc/doc-scripts
---------------------------------------
-This directory contains various scripts that are used to build the distributed
-documentation from its source files.
+This directory contains various scripts that are used to build the distributed
+documentation from its SGCAL source files. This method of maintaining the
+documentation was used up to and including release 4.50 of Exim. There is also
+a script for building the FAQ from its source. This is still (June 2005)
+current, but may be superseded in due course.
End
diff --git a/doc/doc-src/ABOUT b/doc/doc-src/ABOUT
index 9e281e996..990790101 100644
--- a/doc/doc-src/ABOUT
+++ b/doc/doc-src/ABOUT
@@ -1,11 +1,14 @@
-$Cambridge: exim/doc/doc-src/ABOUT,v 1.1 2004/10/08 10:38:48 ph10 Exp $
+$Cambridge: exim/doc/doc-src/ABOUT,v 1.2 2005/06/16 10:32:31 ph10 Exp $
CVS directory exim/exim-doc/doc-src
-----------------------------------
-This directory contains documentation files that are processed in some way in
-order to make the documentation files that form part of Exim distributions. A
-non-standard document processor is currently in use (October 2004), but in the
-long term something more standard will have to take over.
+This directory contains documentation files that are processed in some way in
+order to make the documentation files that form part of Exim distributions. A
+non-standard document processor (SGCAL) was used up to and including release
+4.50 of Exim to process the sources for the manual and filter docuement.
+Subsequent documentation releases operate using DocBook input, so these files
+are now historical relics. The FAQ source is still (June 2005) current, but may
+be superseded in due course.
End