summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--doc/doc-docbook/spec.xfpt36
-rw-r--r--doc/doc-txt/ChangeLog6
-rw-r--r--doc/doc-txt/NewStuff19
-rw-r--r--src/src/EDITME11
-rw-r--r--src/src/config.h.defaults3
-rw-r--r--src/src/demime.c4
-rw-r--r--src/src/exim.c39
-rw-r--r--src/src/functions.h4
-rw-r--r--src/src/malware.c606
-rw-r--r--src/src/receive.c4
-rw-r--r--src/src/regex.c4
-rw-r--r--src/src/spam.c4
-rw-r--r--src/src/spool_mbox.c34
13 files changed, 565 insertions, 209 deletions
diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 2a69fcf59..5cd8f1c0d 100644
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -1,4 +1,4 @@
-. $Cambridge: exim/doc/doc-docbook/spec.xfpt,v 1.76 2010/06/05 10:04:43 pdp Exp $
+. $Cambridge: exim/doc/doc-docbook/spec.xfpt,v 1.77 2010/06/05 11:13:29 pdp Exp $
.
. /////////////////////////////////////////////////////////////////////////////
. This is the primary source of the Exim Manual. It is an xfpt document that is
@@ -3169,6 +3169,17 @@ above concerning senders and qualification do not apply. In this situation,
Exim behaves in exactly the same way as it does when receiving a message via
the listening daemon.
+.vitem &%-bmalware%&&~<&'filename'&>
+.oindex "&%-bmalware%&"
+.cindex "testing", "malware"
+.cindex "malware scan test"
+This debugging option causes Exim to scan the given file,
+using the malware scanning framework. The option of av_scanner influences
+this option, so if av_scanner's value is dependent upon an expansion then
+the expansion should have defaults which apply to this invocation. Exim will
+have changed working directory before resolving the filename, so using fully
+qualified pathnames is advisable. This option requires admin privileges.
+
.vitem &%-bt%&
.oindex "&%-bt%&"
.cindex "testing" "addresses"
@@ -13952,6 +13963,14 @@ an oversized message is logged in both the main and the reject logs. See also
the generic transport option &%message_size_limit%&, which limits the size of
message that an individual transport can process.
+If you use a virus-scanner and set this option to to a value larger than the
+maximum size that your virus-scanner is configured to support, you may get
+failures triggered by large mails. The right size to configure for the
+virus-scanner depends upon what data is passed and the options in use but it's
+probably safest to just set it to a little larger than this value. Eg, with a
+default Exim message size of 50M and a default ClamAV StreamMaxLength of 10M,
+some problems may result.
+
.option move_frozen_messages main boolean false
.cindex "frozen messages" "moving"
@@ -27884,8 +27903,16 @@ required: either the path and name of a UNIX socket file, or a hostname or IP
number, and a port, separated by space, as in the second of these examples:
.code
av_scanner = clamd:/opt/clamd/socket
-av_scanner = clamd:192.168.2.100 1234
-.endd
+av_scanner = clamd:192.0.2.3 1234
+av_scanner = clamd:192.0.2.3 1234:local
+.endd
+If the value of av_scanner points to a UNIX socket file or contains the local
+keyword, then the ClamAV interface will pass a filename containing the data
+to be scanned, which will should normally result in less I/O happening and be
+more efficient. Normally in the TCP case, the data is streamed to ClamAV as
+Exim does not assume that there is a common filesystem with the remote host.
+There is an option WITH_OLD_CLAMAV_STREAM in &_src/EDITME_& available, should
+you be running a version of ClamAV prior to 0.95.
If the option is unset, the default is &_/tmp/clamd_&. Thanks to David Saez for
contributing the code for this scanner.
@@ -28025,6 +28052,9 @@ If your virus scanner cannot unpack MIME and TNEF containers itself, you should
use the &%demime%& condition (see section &<<SECTdemimecond>>&) before the
&%malware%& condition.
+Beware the interaction of Exim's &%message_size_limit%& with any size limits
+imposed by your anti-virus scanner.
+
Here is a very simple scanning example:
.code
deny message = This message contains malware ($malware_name)
diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog
index 828e72fb2..421997b01 100644
--- a/doc/doc-txt/ChangeLog
+++ b/doc/doc-txt/ChangeLog
@@ -1,4 +1,4 @@
-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.620 2010/06/05 10:34:29 pdp Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.621 2010/06/05 11:13:29 pdp Exp $
Change log file for Exim from version 4.21
-------------------------------------------
@@ -27,6 +27,10 @@ PP/07 If TLS negotiated an anonymous cipher, we could end up with SSL but
an assumption that peers always have certificates. Be a little more
paranoid. Problem reported by Martin Tscholak.
+PP/08 Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content
+ filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes
+ NB: ClamAV planning to remove STREAM in "middle of 2010".
+
Exim version 4.72
-----------------
diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index c2c49379f..c4d38fd4f 100644
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,4 +1,4 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.167 2010/06/05 10:04:43 pdp Exp $
+$Cambridge: exim/doc/doc-txt/NewStuff,v 1.168 2010/06/05 11:13:29 pdp Exp $
New Features in Exim
--------------------
@@ -26,6 +26,23 @@ Version 4.73
so that safety mechanism would have to be overriden for this option to
be able to take effect.
+ 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
+ Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
+ Note that this switches Exim to use a new API ("INSTREAM") and a future
+ release of ClamAV will remove support for the old API ("STREAM").
+
+ The av_scanner option, when set to "clamd", now takes an optional third
+ part, "local", which causes Exim to pass a filename to ClamAV instead of
+ the file content. This is the same behaviour as when clamd is pointed at
+ a Unix-domain socket. For example:
+
+ av_scanner = clamd:192.0.2.3 1234:local
+
+ 4. There is now a -bmalware option, restricted to admin users. This option
+ takes one parameter, a filename, and scans that file with Exim's
+ malware-scanning framework. This is intended purely as a debugging aid
+ to ensure that Exim's scanning is working, not to replace other tools.
+
Version 4.72
------------
diff --git a/src/src/EDITME b/src/src/EDITME
index 02f2fead0..85922f8aa 100644
--- a/src/src/EDITME
+++ b/src/src/EDITME
@@ -1,4 +1,4 @@
-# $Cambridge: exim/src/src/EDITME,v 1.24 2010/06/03 15:20:41 jetmore Exp $
+# $Cambridge: exim/src/src/EDITME,v 1.25 2010/06/05 11:13:29 pdp Exp $
##################################################
# The Exim mail transport agent #
@@ -352,6 +352,15 @@ EXIM_MONITOR=eximon.bin
# WITH_OLD_DEMIME=yes
+# If you're using ClamAV and are backporting fixes to an old version, instead
+# of staying current (which is the more usual approach) then you may need to
+# use an older API which uses a STREAM command, now deprecated, instead of
+# zINSTREAM. If you need to set this, please let the Exim developers know, as
+# if nobody reports a need for it, we'll remove this option and clean up the
+# code. zINSTREAM was introduced with ClamAV 0.95.
+#
+# WITH_OLD_CLAMAV_STREAM=yes
+
#------------------------------------------------------------------------------
# By default Exim includes code to support DKIM (DomainKeys Identified
# Mail, RFC4871) signing and verification. Verification of signatures is
diff --git a/src/src/config.h.defaults b/src/src/config.h.defaults
index 8bae17bf6..e114c6bc0 100644
--- a/src/src/config.h.defaults
+++ b/src/src/config.h.defaults
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/config.h.defaults,v 1.18 2009/11/16 19:50:36 nm4 Exp $ */
+/* $Cambridge: exim/src/src/config.h.defaults,v 1.19 2010/06/05 11:13:29 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -146,6 +146,7 @@ it's a default value. */
#define WITH_CONTENT_SCAN
#define WITH_OLD_DEMIME
+#define WITH_OLD_CLAMAV_STREAM
/* EXPERIMENTAL features */
#define EXPERIMENTAL_SPF
diff --git a/src/src/demime.c b/src/src/demime.c
index 2eac6cde6..c64c39734 100644
--- a/src/src/demime.c
+++ b/src/src/demime.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/demime.c,v 1.9 2006/02/22 14:46:44 ph10 Exp $ */
+/* $Cambridge: exim/src/src/demime.c,v 1.10 2010/06/05 11:13:29 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -47,7 +47,7 @@ int demime(uschar **listptr) {
};
/* make sure the eml mbox file is spooled up */
- mbox_file = spool_mbox(&mbox_size);
+ mbox_file = spool_mbox(&mbox_size, NULL);
if (mbox_file == NULL) {
/* error while spooling */
diff --git a/src/src/exim.c b/src/src/exim.c
index 12916e824..c54470bd6 100644
--- a/src/src/exim.c
+++ b/src/src/exim.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/exim.c,v 1.65 2009/11/16 19:50:36 nm4 Exp $ */
+/* $Cambridge: exim/src/src/exim.c,v 1.66 2010/06/05 11:13:29 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -1355,6 +1355,7 @@ uschar *ftest_domain = NULL;
uschar *ftest_localpart = NULL;
uschar *ftest_prefix = NULL;
uschar *ftest_suffix = NULL;
+uschar *malware_test_file = NULL;
uschar *real_sender_address;
uschar *originator_home = US"/";
void *reset_point;
@@ -1821,6 +1822,14 @@ for (i = 1; i < argc; i++)
else if (Ustrcmp(argrest, "m") == 0) receiving_message = TRUE;
+ /* -bmalware: test the filename given for malware */
+
+ else if (Ustrcmp(argrest, "malware") == 0)
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ malware_test_file = argv[i];
+ }
+
/* -bnq: For locally originating messages, do not qualify unqualified
addresses. In the envelope, this causes errors; in header lines they
just get left. */
@@ -3592,12 +3601,13 @@ configuration, but the queue run restriction can be relaxed. Only an admin
user may request that a message be returned to its sender forthwith. Only an
admin user may specify a debug level greater than D_v (because it might show
passwords, etc. in lookup queries). Only an admin user may request a queue
-count. */
+count. Only an admin user can use the test interface to scan for email
+(because Exim will be in the spool dir and able to look at mails). */
if (!admin_user)
{
BOOL debugset = (debug_selector & ~D_v) != 0;
- if (deliver_give_up || daemon_listen ||
+ if (deliver_give_up || daemon_listen || malware_test_file ||
(count_queue && queue_list_requires_admin) ||
(list_queue && queue_list_requires_admin) ||
(queue_interval >= 0 && prod_requires_admin) ||
@@ -3748,6 +3758,29 @@ if (!unprivileged && /* originally had root AND */
else setgid(exim_gid);
+/* Handle a request to scan a file for malware */
+if (malware_test_file)
+ {
+ int result;
+ set_process_info("scanning file for malware");
+ result = malware_in_file(malware_test_file);
+ if (result == FAIL)
+ {
+ printf("No malware found.\n");
+ exit(EXIT_SUCCESS);
+ }
+ if (result != OK)
+ {
+ printf("Malware lookup returned non-okay/fail: %d\n", result);
+ exit(EXIT_FAILURE);
+ }
+ if (malware_name)
+ printf("Malware found: %s\n", malware_name);
+ else
+ printf("Malware scan detected malware of unknown name.\n");
+ exit(EXIT_FAILURE);
+ }
+
/* Handle a request to list the delivery queue */
if (list_queue)
diff --git a/src/src/functions.h b/src/src/functions.h
index 612d1e708..436038735 100644
--- a/src/src/functions.h
+++ b/src/src/functions.h
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/functions.h,v 1.48 2010/06/05 09:10:10 pdp Exp $ */
+/* $Cambridge: exim/src/src/functions.h,v 1.49 2010/06/05 11:13:30 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -297,7 +297,7 @@ extern BOOL smtp_verify_helo(void);
extern int smtp_write_command(smtp_outblock *, BOOL, char *, ...);
#ifdef WITH_CONTENT_SCAN
extern int spam(uschar **);
-extern FILE *spool_mbox(unsigned long *);
+extern FILE *spool_mbox(unsigned long *, uschar *);
#endif
extern BOOL spool_move_message(uschar *, uschar *, uschar *, uschar *);
extern BOOL spool_open_datafile(uschar *);
diff --git a/src/src/malware.c b/src/src/malware.c
index bbd293997..5ee52eb84 100644
--- a/src/src/malware.c
+++ b/src/src/malware.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/malware.c,v 1.18 2009/11/11 10:08:01 nm4 Exp $ */
+/* $Cambridge: exim/src/src/malware.c,v 1.19 2010/06/05 11:13:30 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -13,7 +13,8 @@
#ifdef WITH_CONTENT_SCAN
/* declaration of private routines */
-int mksd_scan_packed(int sock);
+static int mksd_scan_packed(int sock, uschar *scan_filename);
+static int malware_internal(uschar **listptr, uschar *eml_filename, BOOL faking);
/* SHUT_WR seems to be undefined on Unixware? */
#ifndef SHUT_WR
@@ -48,7 +49,104 @@ int test_byte_order() {
uschar malware_name_buffer[256];
int malware_ok = 0;
+/* Gross hacks for the -bmalware option; perhaps we should just create
+the scan directory normally for that case, but look into rigging up the
+needed header variables if not already set on the command-line? */
+extern int spool_mbox_ok;
+extern uschar spooled_message_id[17];
+
+/*************************************************
+* Scan an email for malware *
+*************************************************/
+
+/* This is the normal interface for scanning an email, which doesn't need a
+filename; it's a wrapper around the malware_file function.
+
+Arguments:
+ listptr the list of options to the "malware = ..." ACL condition
+
+Returns: Exim message processing code (OK, FAIL, DEFER, ...)
+ where true means malware was found (condition applies)
+*/
int malware(uschar **listptr) {
+ uschar scan_filename[1024];
+ BOOL fits;
+
+ fits = string_format(scan_filename, sizeof(scan_filename),
+ CS"%s/scan/%s/%s.eml", spool_directory, message_id, message_id);
+ if (!fits)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware filename does not fit in buffer [malware()]");
+ return DEFER;
+ }
+
+ return malware_internal(listptr, scan_filename, FALSE);
+}
+
+
+/*************************************************
+* Scan a file for malware *
+*************************************************/
+
+/* This is a test wrapper for scanning an email, which is not used in
+normal processing. Scan any file, using the Exim scanning interface.
+This function tampers with various global variables so is unsafe to use
+in any other context.
+
+Arguments:
+ eml_filename a file holding the message to be scanned
+
+Returns: Exim message processing code (OK, FAIL, DEFER, ...)
+ where true means malware was found (condition applies)
+*/
+int malware_in_file(uschar *eml_filename) {
+ uschar *scan_options[2];
+ uschar message_id_buf[64];
+ int ret;
+
+ scan_options[0] = "*";
+ scan_options[1] = NULL;
+
+ /* spool_mbox() assumes various parameters exist, when creating
+ the relevant directory and the email within */
+ (void) string_format(message_id_buf, sizeof(message_id_buf),
+ US"dummy-%d", pseudo_random_number(INT_MAX));
+ message_id = message_id_buf;
+ sender_address = "malware-sender@example.net";
+ return_path = "";
+ recipients_list = NULL;
+ receive_add_recipient("malware-victim@example.net", -1);
+ enable_dollar_recipients = TRUE;
+
+ ret = malware_internal(scan_options, eml_filename, TRUE);
+
+ strncpy(spooled_message_id, message_id, sizeof(spooled_message_id));
+ spool_mbox_ok = 1;
+ /* don't set no_mbox_unspool; at present, there's no way for it to become
+ set, but if that changes, then it should apply to these tests too */
+ unspool_mbox();
+
+ return ret;
+}
+
+
+/*************************************************
+* Scan content for malware *
+*************************************************/
+
+/* This is an internal interface for scanning an email; the normal interface
+is via malware(), or there's malware_in_file() used for testing/debugging.
+
+Arguments:
+ listptr the list of options to the "malware = ..." ACL condition
+ eml_filename the file holding the email to be scanned
+ faking whether or not we're faking this up for the -bmalware test
+
+Returns: Exim message processing code (OK, FAIL, DEFER, ...)
+ where true means malware was found (condition applies)
+*/
+static int malware_internal(uschar **listptr, uschar *eml_filename, BOOL faking) {
int sep = 0;
uschar *list = *listptr;
uschar *av_scanner_work = av_scanner;
@@ -64,7 +162,7 @@ int malware(uschar **listptr) {
const uschar *rerror;
/* make sure the eml mbox file is spooled up */
- mbox_file = spool_mbox(&mbox_size);
+ mbox_file = spool_mbox(&mbox_size, faking ? eml_filename : NULL);
if (mbox_file == NULL) {
/* error while spooling */
log_write(0, LOG_MAIN|LOG_PANIC,
@@ -202,8 +300,8 @@ int malware(uschar **listptr) {
return DEFER;
}
- (void)string_format(scanrequest, 1024, CS"GET %s/scan/%s/%s.eml",
- spool_directory, message_id, message_id);
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s GET\n", scanner_name);
+ (void)string_format(scanrequest, 1024, CS"GET %s", eml_filename);
while ((fp_scan_option = string_nextinlist(&av_scanner_work, &sep,
fp_scan_option_buffer, sizeof(fp_scan_option_buffer))) != NULL) {
@@ -257,7 +355,6 @@ int malware(uschar **listptr) {
int sock, result, ovector[30];
unsigned int port, fsize;
uschar tmpbuf[1024], *drweb_fbuf;
- uschar scanrequest[1024];
uschar drweb_match_string[128];
int drweb_rc, drweb_cmd, drweb_flags = 0x0000, drweb_fd,
drweb_vnum, drweb_slen, drweb_fin = 0x0000;
@@ -310,16 +407,14 @@ int malware(uschar **listptr) {
/* prepare variables */
drweb_cmd = htonl(DRWEBD_SCAN_CMD);
drweb_flags = htonl(DRWEBD_RETURN_VIRUSES | DRWEBD_IS_MAIL);
- (void)string_format(scanrequest, 1024,CS"%s/scan/%s/%s.eml",
- spool_directory, message_id, message_id);
/* calc file size */
- drweb_fd = open(CS scanrequest, O_RDONLY);
+ drweb_fd = open(CS eml_filename, O_RDONLY);
if (drweb_fd == -1) {
(void)close(sock);
log_write(0, LOG_MAIN|LOG_PANIC,
"malware acl condition: drweb: can't open spool file %s: %s",
- scanrequest, strerror(errno));
+ eml_filename, strerror(errno));
return DEFER;
}
fsize = lseek(drweb_fd, 0, SEEK_END);
@@ -328,12 +423,15 @@ int malware(uschar **listptr) {
(void)close(drweb_fd);
log_write(0, LOG_MAIN|LOG_PANIC,
"malware acl condition: drweb: can't seek spool file %s: %s",
- scanrequest, strerror(errno));
+ eml_filename, strerror(errno));
return DEFER;
}
drweb_slen = htonl(fsize);
lseek(drweb_fd, 0, SEEK_SET);
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s remote scan [%s %u]\n",
+ scanner_name, hostname, port);
+
/* send scan request */
if ((send(sock, &drweb_cmd, sizeof(drweb_cmd), 0) < 0) ||
(send(sock, &drweb_flags, sizeof(drweb_flags), 0) < 0) ||
@@ -352,7 +450,7 @@ int malware(uschar **listptr) {
(void)close(drweb_fd);
log_write(0, LOG_MAIN|LOG_PANIC,
"malware acl condition: drweb: unable to allocate memory %u for file (%s)",
- fsize, scanrequest);
+ fsize, eml_filename);
return DEFER;
}
@@ -363,7 +461,7 @@ int malware(uschar **listptr) {
free(drweb_fbuf);
log_write(0, LOG_MAIN|LOG_PANIC,
"malware acl condition: drweb: can't read spool file %s: %s",
- scanrequest, strerror(errno));
+ eml_filename, strerror(errno));
return DEFER;
}
(void)close(drweb_fd);
@@ -398,14 +496,16 @@ int malware(uschar **listptr) {
/* prepare variables */
drweb_cmd = htonl(DRWEBD_SCAN_CMD);
drweb_flags = htonl(DRWEBD_RETURN_VIRUSES | DRWEBD_IS_MAIL);
- (void)string_format(scanrequest, 1024,CS"%s/scan/%s/%s.eml", spool_directory, message_id, message_id);
- drweb_slen = htonl(Ustrlen(scanrequest));
+ drweb_slen = htonl(Ustrlen(eml_filename));
+
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s local scan [%s]\n",
+ scanner_name, drweb_options);
/* send scan request */
if ((send(sock, &drweb_cmd, sizeof(drweb_cmd), 0) < 0) ||
(send(sock, &drweb_flags, sizeof(drweb_flags), 0) < 0) ||
(send(sock, &drweb_slen, sizeof(drweb_slen), 0) < 0) ||
- (send(sock, scanrequest, Ustrlen(scanrequest), 0) < 0) ||
+ (send(sock, eml_filename, Ustrlen(eml_filename), 0) < 0) ||
(send(sock, &drweb_fin, sizeof(drweb_fin), 0) < 0)) {
(void)close(sock);
log_write(0, LOG_MAIN|LOG_PANIC,
@@ -557,7 +657,9 @@ int malware(uschar **listptr) {
};
/* prepare our command */
- (void)string_format(buf, 32768, "SCAN bPQRSTUW %s/scan/%s/%s.eml\r\n", spool_directory, message_id, message_id);
+ (void)string_format(buf, 32768, "SCAN bPQRSTUW %s\r\n", eml_filename);
+
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s SCAN\n", scanner_name);
/* and send it */
if (send(sock, buf, Ustrlen(buf), 0) < 0) {
@@ -577,8 +679,8 @@ int malware(uschar **listptr) {
} else if (buf[0] == '5') {
/* aveserver is having problems */
log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: unable to scan file %s/scan/%s/%s.eml (Responded: %s).",
- spool_directory, message_id, message_id, buf);
+ "malware acl condition: unable to scan file %s (Responded: %s).",
+ eml_filename, buf);
result = DEFER;
break;
} else if (Ustrncmp(buf,"322",3) == 0) {
@@ -656,6 +758,9 @@ int malware(uschar **listptr) {
return DEFER;
}
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s scan [%s]\n",
+ scanner_name, fsecure_options);
+
/* pass options */
memset(av_buffer, 0, sizeof(av_buffer));
for (i=0; i != 4; i++) {
@@ -682,7 +787,7 @@ int malware(uschar **listptr) {
};
/* pass the mailfile to fsecure */
- (void)string_format(file_name,1024,"SCAN\t%s/scan/%s/%s.eml\n", spool_directory, message_id, message_id);
+ (void)string_format(file_name,1024,"SCAN\t%s\n", eml_filename);
/* debug_printf("send scan %s",file_name); */
if (write(sock, file_name, Ustrlen(file_name)) < 0) {
(void)close(sock);
@@ -745,6 +850,8 @@ int malware(uschar **listptr) {
int kav_rc;
unsigned long kav_reportlen, bread;
pcre *kav_re;
+ uschar *p;
+ int fits;
if ((kav_options = string_nextinlist(&av_scanner_work, &sep,
kav_options_buffer,
@@ -771,8 +878,24 @@ int malware(uschar **listptr) {
/* get current date and time, build scan request */
time(&t);
- strftime(CS tmpbuf, sizeof(tmpbuf), "<0>%d %b %H:%M:%S:%%s/scan/%%s", localtime(&t));
- (void)string_format(scanrequest, 1024,CS tmpbuf, spool_directory, message_id);
+ /* pdp note: before the eml_filename parameter, this scanned the
+ directory; not finding documentation, so we'll strip off the directory.
+ The side-effect is that the test framework scanning may end up in
+ scanning more than was requested, but for the normal interface, this is
+ fine. */
+ strftime(CS tmpbuf, sizeof(tmpbuf), "<0>%d %b %H:%M:%S:%%s", localtime(&t));
+ fits = string_format(scanrequest, 1024,CS tmpbuf, eml_filename);
+ if (!fits) {
+ (void)close(sock);
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware filename does not fit in buffer [malware_internal() kavdaemon]");
+ }
+ p = strrchr(scanrequest, '/');
+ if (p)
+ *p = '\0';
+
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s scan [%s]\n",
+ scanner_name, kav_options);
/* send scan request */
if (send(sock, scanrequest, Ustrlen(scanrequest)+1, 0) < 0) {
@@ -917,6 +1040,8 @@ int malware(uschar **listptr) {
int trigger = 0;
int result;
int ovector[30];
+ uschar *p;
+ BOOL fits;
/* find scanner command line */
if ((cmdline_scanner = string_nextinlist(&av_scanner_work, &sep,
@@ -964,12 +1089,36 @@ int malware(uschar **listptr) {
return DEFER;
};
- /* prepare scanner call */
- (void)string_format(file_name,1024,"%s/scan/%s", spool_directory, message_id);
- (void)string_format(commandline,1024, CS cmdline_scanner,file_name);
+ /* prepare scanner call; despite the naming, file_name holds a directory
+ name which is documented as the value given to %s. */
+ if (Ustrlen(eml_filename) > sizeof(file_name) - 1)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware filename does not fit in buffer [malware_internal() cmdline]");
+ return DEFER;
+ }
+ p = strrchr(eml_filename, '/');
+ if (p)
+ *p = '\0';
+ fits = string_format(commandline, sizeof(commandline), CS cmdline_scanner, file_name);
+ if (!fits)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "cmdline scanner command-line does not fit in buffer");
+ return DEFER;
+ }
+
/* redirect STDERR too */
+ if (Ustrlen(commandline) + 5 > sizeof(commandline))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "cmdline scanner command-line does not fit in buffer (STDERR redirect)");
+ return DEFER;
+ }
Ustrcat(commandline," 2>&1");
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s scan [%s]\n", scanner_name, commandline);
+
/* store exims signal handlers */
eximsigchld = signal(SIGCHLD,SIG_DFL);
eximsigpipe = signal(SIGPIPE,SIG_DFL);
@@ -1047,7 +1196,9 @@ int malware(uschar **listptr) {
uschar sophie_options_default[] = "/var/run/sophie";
int bread = 0;
struct sockaddr_un server;
- int sock;
+ int sock, len;
+ uschar *p;
+ BOOL fits;
uschar file_name[1024];
uschar av_buffer[1024];
@@ -1075,7 +1226,22 @@ int malware(uschar **listptr) {
}
/* pass the scan directory to sophie */
- (void)string_format(file_name,1024,"%s/scan/%s", spool_directory, message_id);
+ len = Ustrlen(eml_filename) + 1;
+ if (len > sizeof(file_name))
+ {
+ (void)close(sock);
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware filename does not fit in buffer [malware_internal() sophie]");
+ return DEFER;
+ }
+ memcpy(file_name, eml_filename, len);
+ p = strrchr(file_name, '/');
+ if (p)
+ *p = '\0';
+
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s scan [%s]\n",
+ scanner_name, sophie_options);
+
if (write(sock, file_name, Ustrlen(file_name)) < 0) {
(void)close(sock);
log_write(0, LOG_MAIN|LOG_PANIC,
@@ -1116,7 +1282,17 @@ int malware(uschar **listptr) {
/* "clamd" scanner type ------------------------------------------------- */
- /* This code was contributed by David Saez */
+ /* This code was originally contributed by David Saez */
+ /* There are three scanning methods available to us:
+ * (1) Use the SCAN command, pointing to a file in the filesystem
+ * (2) Use the STREAM command, send the data on a separate port
+ * (3) Use the zINSTREAM command, send the data inline
+ * The zINSTREAM command was introduced with ClamAV 0.95, which marked
+ * STREAM deprecated; see: http://wiki.clamav.net/bin/view/Main/UpgradeNotes095
+ * In Exim, we use SCAN if using a Unix-domain socket or explicitly told that
+ * the TCP-connected daemon is actually local; otherwise we use zINSTREAM unless
+ * WITH_OLD_CLAMAV_STREAM is defined.
+ * See Exim bug 926 for details. */
else if (strcmpic(scanner_name,US"clamd") == 0) {
uschar *clamd_options;
uschar clamd_options_buffer[1024];
@@ -1133,11 +1309,16 @@ int malware(uschar **listptr) {
uschar *clamd_options2;
uschar clamd_options2_buffer[1024];
uschar clamd_options2_default[] = "";
- uschar av_buffer2[1024];
uschar *clamav_fbuf;
uschar scanrequest[1024];
int sockData, clam_fd, result;
unsigned int fsize;
+ BOOL use_scan_command, fits;
+#ifdef WITH_OLD_CLAMAV_STREAM
+ uschar av_buffer2[1024];
+#else
+ uint32_t send_size, send_final_zeroblock;
+#endif
if ((clamd_options = string_nextinlist(&av_scanner_work, &sep,
clamd_options_buffer,
@@ -1151,9 +1332,18 @@ int malware(uschar **listptr) {
clamd_options2 = clamd_options2_default;
}
+ if ((*clamd_options == '/') || (strcmpic(clamd_options2,US"local") == 0))
+ use_scan_command = TRUE;
+ else
+ use_scan_command = FALSE;
+
/* socket does not start with '/' -> network socket */
if (*clamd_options != '/') {
+ /* Confirmed in ClamAV source (0.95.3) that the TCPAddr option of clamd
+ * only supports AF_INET, but we should probably be looking to the
+ * future and rewriting this to be protocol-independent anyway. */
+
/* extract host and port part */
if( sscanf(CS clamd_options, "%s %u", hostname, &port) != 2 ) {
log_write(0, LOG_MAIN|LOG_PANIC,
@@ -1186,166 +1376,225 @@ int malware(uschar **listptr) {
return DEFER;
}
- if (strcmpic(clamd_options2,US"local") == 0) {
+ } else {
+ /* open the local socket */
+ if ((sock = socket(AF_UNIX, SOCK_STREAM, 0)) < 0) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to acquire socket (%s)",
+ strerror(errno));
+ return DEFER;
+ }
- /* Pass the string to ClamAV (7 = "SCAN \n" + \0) */
+ server.sun_family = AF_UNIX;
+ Ustrcpy(server.sun_path, clamd_options);
- (void)string_format(file_name,1024,"SCAN %s/scan/%s\n", spool_directory, message_id);
+ if (connect(sock, (struct sockaddr *) &server, sizeof(struct sockaddr_un)) < 0) {
+ (void)close(sock);
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to connect to UNIX socket %s (%s)",
+ clamd_options, strerror(errno) );
+ return DEFER;
+ }
+ }
- if (send(sock, file_name, Ustrlen(file_name), 0) < 0) {
- (void)close(sock);
- log_write(0, LOG_MAIN|LOG_PANIC,"malware acl condition: clamd: unable to write to socket (%s)",
- strerror(errno));
- return DEFER;
- }
- } else {
+ /* have socket in variable "sock"; command to use is semi-independent of
+ * the socket protocol. We use SCAN if is local (either Unix/local
+ * domain socket, or explicitly told local) else we stream the data.
+ * How we stream the data depends upon how we were built. */
- /* Pass the string to ClamAV (7 = "STREAM\n") */
+ if (!use_scan_command) {
- if (send(sock, "STREAM\n", 7, 0) < 0) {
- (void)close(sock);
- log_write(0, LOG_MAIN|LOG_PANIC,"malware acl condition: clamd: unable to write to socket (%s)",
- strerror(errno));
- return DEFER;
- }
- memset(av_buffer2, 0, sizeof(av_buffer2));
- bread = ip_recv(sock, av_buffer2, sizeof(av_buffer2), MALWARE_TIMEOUT);
+#ifdef WITH_OLD_CLAMAV_STREAM
+ /* "STREAM\n" command, get back a "PORT <N>\n" response, send data to
+ * that port on a second connection; then in the scan-method-neutral
+ * part, read the response back on the original connection. */
- if (bread < 0) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: unable to read PORT from socket (%s)",
- strerror(errno));
- return DEFER;
- }
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s old-style remote scan (PORT)\n",
+ scanner_name);
- if (bread == sizeof(av_buffer)) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: buffer too small");
- return DEFER;
- }
+ /* Pass the string to ClamAV (7 = "STREAM\n") */
+ if (send(sock, "STREAM\n", 7, 0) < 0) {
+ log_write(0, LOG_MAIN|LOG_PANIC,"malware acl condition: clamd: unable to write to socket (%s)",
+ strerror(errno));
+ (void)close(sock);
+ return DEFER;
+ }
+ memset(av_buffer2, 0, sizeof(av_buffer2));
+ bread = ip_recv(sock, av_buffer2, sizeof(av_buffer2), MALWARE_TIMEOUT);
- if (!(*av_buffer2)) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: ClamAV returned null");
- return DEFER;
- }
+ if (bread < 0) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to read PORT from socket (%s)",
+ strerror(errno));
+ (void)close(sock);
+ return DEFER;
+ }
- av_buffer2[bread] = '\0';
- if( sscanf(CS av_buffer2, "PORT %u\n", &port) != 1 ) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: Expected port information from clamd, got '%s'", av_buffer2);
- return DEFER;
- };
+ if (bread == sizeof(av_buffer)) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: buffer too small");
+ (void)close(sock);
+ return DEFER;
+ }
- if ( (sockData = ip_socket(SOCK_STREAM, AF_INET)) < 0) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: unable to acquire socket (%s)",
- strerror(errno));
- return DEFER;
- }
+ if (!(*av_buffer2)) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: ClamAV returned null");
+ (void)close(sock);
+ return DEFER;
+ }
- if (ip_connect(sockData, AF_INET, (uschar*)inet_ntoa(in), port, 5) < 0) {
- (void)close(sockData);
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: connection to %s, port %u failed (%s)",
- inet_ntoa(in), port, strerror(errno));
- return DEFER;
- }
+ av_buffer2[bread] = '\0';
+ if( sscanf(CS av_buffer2, "PORT %u\n", &port) != 1 ) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: Expected port information from clamd, got '%s'", av_buffer2);
+ (void)close(sock);
+ return DEFER;
+ };
- (void)string_format(scanrequest, 1024,CS"%s/scan/%s/%s.eml",
- spool_directory, message_id, message_id);
+ if ( (sockData = ip_socket(SOCK_STREAM, AF_INET)) < 0) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to acquire socket (%s)",
+ strerror(errno));
+ (void)close(sock);
+ return DEFER;
+ }
- /* calc file size */
- clam_fd = open(CS scanrequest, O_RDONLY);
- if (clam_fd == -1) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: can't open spool file %s: %s",
- scanrequest, strerror(errno));
- return DEFER;
- }
- fsize = lseek(clam_fd, 0, SEEK_END);
- if (fsize == -1) {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: can't seek spool file %s: %s",
- scanrequest, strerror(errno));
- return DEFER;
- }
- lseek(clam_fd, 0, SEEK_SET);
+ if (ip_connect(sockData, AF_INET, (uschar*)inet_ntoa(in), port, 5) < 0) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: connection to %s, port %u failed (%s)",
+ inet_ntoa(in), port, strerror(errno));
+ (void)close(sockData); (void)close(sock);
+ return DEFER;
+ }
- clamav_fbuf = (uschar *) malloc (fsize);
- if (!clamav_fbuf) {
- (void)close(sockData);
- (void)close(clam_fd);
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: unable to allocate memory %u for file (%s)",
- fsize, scanrequest);
- return DEFER;
- }
+#define CLOSE_SOCKDATA (void)close(sockData)
+#else /* WITH_OLD_CLAMAV_STREAM not defined */
+ /* New protocol: "zINSTREAM\n" followed by a sequence of <length><data>
+ chunks, <n> a 4-byte number (network order), terminated by a zero-length
+ chunk. */
- result = read (clam_fd, clamav_fbuf, fsize);
- if (result == -1) {
- (void)close(sockData);
- (void)close(clam_fd);
- free(clamav_fbuf);
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: can't read spool file %s: %s",
- scanrequest, strerror(errno));
- return DEFER;
- }
- (void)close(clam_fd);
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s new-style remote scan (zINSTREAM)\n",
+ scanner_name);
- /* send file body to socket */
- if (send(sockData, clamav_fbuf, fsize, 0) < 0) {
- (void)close(sockData);
- free(clamav_fbuf);
- log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: unable to send file body to socket (%s:%u)", hostname, port);
- return DEFER;
- }
- free(clamav_fbuf);
- (void)close(sockData);
- }
- }
- else {
- /* open the local socket */
- if ((sock = socket(AF_UNIX, SOCK_STREAM, 0)) < 0) {
+ /* Pass the string to ClamAV (10 = "zINSTREAM\0") */
+ if (send(sock, "zINSTREAM", 10, 0) < 0) {
log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: unable to acquire socket (%s)",
- strerror(errno));
+ "malware acl condition: clamd: unable to send zINSTREAM to socket (%s)",
+ strerror(errno));
+ (void)close(sock);
return DEFER;
}
- server.sun_family = AF_UNIX;
- Ustrcpy(server.sun_path, clamd_options);
+#define CLOSE_SOCKDATA /**/
+#endif
- if (connect(sock, (struct sockaddr *) &server, sizeof(struct sockaddr_un)) < 0) {
- (void)close(sock);
+ /* calc file size */
+ clam_fd = open(CS eml_filename, O_RDONLY);
+ if (clam_fd == -1) {
log_write(0, LOG_MAIN|LOG_PANIC,
- "malware acl condition: clamd: unable to connect to UNIX socket %s (%s)",
- clamd_options, strerror(errno) );
+ "malware acl condition: clamd: can't open spool file %s: %s",
+ eml_filename, strerror(errno));
+ CLOSE_SOCKDATA; (void)close(sock);
return DEFER;
}
- }
+ fsize = lseek(clam_fd, 0, SEEK_END);
+ if (fsize == -1) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: can't seek spool file %s: %s",
+ eml_filename, strerror(errno));
+ CLOSE_SOCKDATA; (void)close(sock);
+ return DEFER;
+ }
+ lseek(clam_fd, 0, SEEK_SET);
- /* Pass the string to ClamAV (7 = "SCAN \n" + \0) */
+ clamav_fbuf = (uschar *) malloc (fsize);
+ if (!clamav_fbuf) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to allocate memory %u for file (%s)",
+ fsize, eml_filename);
+ CLOSE_SOCKDATA; (void)close(sock); (void)close(clam_fd);
+ return DEFER;
+ }
- (void)string_format(file_name,1024,"SCAN %s/scan/%s\n", spool_directory, message_id);
+ result = read (clam_fd, clamav_fbuf, fsize);
+ if (result == -1) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: can't read spool file %s: %s",
+ eml_filename, strerror(errno));
+ CLOSE_SOCKDATA; (void)close(sock); (void)close(clam_fd);
+ free(clamav_fbuf);
+ return DEFER;
+ }
+ (void)close(clam_fd);
- if (send(sock, file_name, Ustrlen(file_name), 0) < 0) {
- (void)close(sock);
- log_write(0, LOG_MAIN|LOG_PANIC,"malware acl condition: clamd: unable to write to socket (%s)",
- strerror(errno));
- return DEFER;
- }
+ /* send file body to socket */
+#ifdef WITH_OLD_CLAMAV_STREAM
+ if (send(sockData, clamav_fbuf, fsize, 0) < 0) {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to send file body to socket (%s:%u)", hostname, port);
+ CLOSE_SOCKDATA; (void)close(sock);
+ free(clamav_fbuf);
+ return DEFER;
+ }
+#else
+ send_size = htonl(fsize);
+ send_final_zeroblock = 0;
+ if ((send(sock, &send_size, sizeof(send_size), 0) < 0) ||
+ (send(sock, clamav_fbuf, fsize, 0) < 0) ||
+ (send(sock, &send_final_zeroblock, sizeof(send_final_zeroblock), 0) < 0))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware acl condition: clamd: unable to send file body to socket (%s:%u)", hostname, port);
+ (void)close(sock);
+ free(clamav_fbuf);
+ return DEFER;
+ }
+#endif
- /*
- We're done sending, close socket for writing.
+ free(clamav_fbuf);
+
+ CLOSE_SOCKDATA;
+#undef CLOSE_SOCKDATA
+
+ } else { /* use scan command */
+ /* Send a SCAN command pointing to a filename; then in the then in the
+ * scan-method-neutral part, read the response back */
+
+/* ================================================================= */
+
+ /* Prior to the reworking post-Exim-4.72, this scanned a directory,
+ which dates to when ClamAV needed us to break apart the email into the
+ MIME parts (eg, with the now deprecated demime condition coming first).
+ Some time back, ClamAV gained the ability to deconstruct the emails, so
+ doing this would actually have resulted in the mail attachments being
+ scanned twice, in the broken out files and from the original .eml.
+ Since ClamAV now handles emails (and has for quite some time) we can
+ just use the email file itself. */
+ /* Pass the string to ClamAV (7 = "SCAN \n" + \0) */
+ fits = string_format(file_name, sizeof(file_name), "SCAN %s\n",
+ eml_filename);
+ if (!fits) {
+ (void)close(sock);
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "malware filename does not fit in buffer [malware_internal() clamd]");
+ }
- One user reported that clamd 0.70 does not like this any more ...
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s local-path scan [%s]\n",
+ scanner_name, clamd_options);
- */
+ if (send(sock, file_name, Ustrlen(file_name), 0) < 0) {
+ (void)close(sock);
+ log_write(0, LOG_MAIN|LOG_PANIC,"malware acl condition: clamd: unable to write to socket (%s)",
+ strerror(errno));
+ return DEFER;
+ }
- /* shutdown(sock, SHUT_WR); */
+ /* Do not shut down the socket for writing; a user report noted that
+ * clamd 0.70 does not react well to this. */
+ }
+ /* Commands have been sent, no matter which scan method or connection
+ * type we're using; now just read the result, independent of method. */
/* Read the result */
memset(av_buffer, 0, sizeof(av_buffer));
@@ -1368,7 +1617,7 @@ int malware(uschar **listptr) {
/* Check the result. ClamAV Returns
infected: -> "<filename>: <virusname> FOUND"
not-infected: -> "<filename>: OK"
- error: -> "<filename>: <errcode> ERROR */
+ error: -> "<filename>: <errcode> ERROR */
if (!(*av_buffer)) {
log_write(0, LOG_MAIN|LOG_PANIC,
@@ -1376,10 +1625,12 @@ int malware(uschar **listptr) {
return DEFER;
}
- /* strip newline at the end */
+ /* strip newline at the end (won't be present for zINSTREAM) */
p = av_buffer + Ustrlen(av_buffer) - 1;
if( *p == '\n' ) *p = '\0';
+ DEBUG(D_acl) debug_printf("Malware response: %s\n", av_buffer);
+
/* colon in returned output? */
if((p = Ustrrchr(av_buffer,':')) == NULL) {
log_write(0, LOG_MAIN|LOG_PANIC,
@@ -1398,6 +1649,7 @@ int malware(uschar **listptr) {
for (;*vname==32;vname++);
Ustrcpy(malware_name_buffer,vname);
malware_name = malware_name_buffer;
+ DEBUG(D_acl) debug_printf("Malware found, name \"%s\"\n", malware_name);
}
else {
if (Ustrstr(vname, "ERROR")!=NULL) {
@@ -1413,6 +1665,7 @@ int malware(uschar **listptr) {
else {
/* Everything should be OK */
malware_name = NULL;
+ DEBUG(D_acl) debug_printf("Malware not found\n");
}
}
}
@@ -1459,7 +1712,9 @@ int malware(uschar **listptr) {
malware_name = NULL;
- retval = mksd_scan_packed(sock);
+ DEBUG(D_acl) debug_printf("Malware scan: issuing %s scan\n", scanner_name);
+
+ retval = mksd_scan_packed(sock, eml_filename);
if (retval != OK)
return retval;
@@ -1481,6 +1736,7 @@ int malware(uschar **listptr) {
/* match virus name against pattern (caseless ------->----------v) */
if ( (malware_name != NULL) &&
(regex_match_and_setup(re, malware_name, 0, -1)) ) {
+ DEBUG(D_acl) debug_printf("Matched regex to malware [%s] [%s]\n", malware_regex, malware_name);
return OK;
}
else {
@@ -1510,7 +1766,7 @@ int recv_line(int sock, uschar *buffer, int size) {
#include <sys/uio.h>
-int mksd_writev (int sock, struct iovec *iov, int iovcnt)
+static int mksd_writev (int sock, struct iovec *iov, int iovcnt)
{
int i;
@@ -1539,7 +1795,7 @@ int mksd_writev (int sock, struct iovec *iov, int iovcnt)
}
}
-int mksd_read_lines (int sock, uschar *av_buffer, int av_buffer_size)
+static int mksd_read_lines (int sock, uschar *av_buffer, int av_buffer_size)
{
int offset = 0;
int i;
@@ -1566,7 +1822,7 @@ int mksd_read_lines (int sock, uschar *av_buffer, int av_buffer_size)
return offset;
}
-int mksd_parse_line (char *line)
+static int mksd_parse_line (char *line)
{
char *p;
@@ -1600,26 +1856,20 @@ int mksd_parse_line (char *line)
}
}
-int mksd_scan_packed (int sock)
+static int mksd_scan_packed(int sock, uschar *scan_filename)
{
- struct iovec iov[7];
- char *cmd = "MSQ/scan/.eml\n";
+ struct iovec iov[3];
+ char *cmd = "MSQ\n";
uschar av_buffer[1024];
iov[0].iov_base = cmd;
iov[0].iov_len = 3;
- iov[1].iov_base = CS spool_directory;
- iov[1].iov_len = Ustrlen (spool_directory);
+ iov[1].iov_base = CS scan_filename;
+ iov[1].iov_len = Ustrlen(scan_filename);
iov[2].iov_base = cmd + 3;
- iov[2].iov_len = 6;
- iov[3].iov_base = iov[5].iov_base = CS message_id;
- iov[3].iov_len = iov[5].iov_len = Ustrlen (message_id);
- iov[4].iov_base = cmd + 3;
- iov[4].iov_len = 1;
- iov[6].iov_base = cmd + 9;
- iov[6].iov_len = 5;
-
- if (mksd_writev (sock, iov, 7) < 0)
+ iov[2].iov_len = 1;
+
+ if (mksd_writev (sock, iov, 3) < 0)
return DEFER;
if (mksd_read_lines (sock, av_buffer, sizeof (av_buffer)) < 0)
diff --git a/src/src/receive.c b/src/src/receive.c
index 54575fe62..c4fb31ea7 100644
--- a/src/src/receive.c
+++ b/src/src/receive.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/receive.c,v 1.54 2010/06/03 05:40:27 pdp Exp $ */
+/* $Cambridge: exim/src/src/receive.c,v 1.55 2010/06/05 11:13:30 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -1094,7 +1094,7 @@ return TRUE;
DO_MIME_ACL:
/* make sure the eml mbox file is spooled up */
-mbox_file = spool_mbox(&mbox_size);
+mbox_file = spool_mbox(&mbox_size, NULL);
if (mbox_file == NULL) {
/* error while spooling */
log_write(0, LOG_MAIN|LOG_PANIC,
diff --git a/src/src/regex.c b/src/src/regex.c
index 63c1c2c10..d502eca13 100644
--- a/src/src/regex.c
+++ b/src/src/regex.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/regex.c,v 1.7 2005/07/01 10:49:02 ph10 Exp $ */
+/* $Cambridge: exim/src/src/regex.c,v 1.8 2010/06/05 11:13:30 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -47,7 +47,7 @@ int regex(uschar **listptr) {
if (mime_stream == NULL) {
/* We are in the DATA ACL */
- mbox_file = spool_mbox(&mbox_size);
+ mbox_file = spool_mbox(&mbox_size, NULL);
if (mbox_file == NULL) {
/* error while spooling */
log_write(0, LOG_MAIN|LOG_PANIC,
diff --git a/src/src/spam.c b/src/src/spam.c
index beec82363..f2ca92712 100644
--- a/src/src/spam.c
+++ b/src/src/spam.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/spam.c,v 1.17 2008/07/18 17:55:42 fanf2 Exp $ */
+/* $Cambridge: exim/src/src/spam.c,v 1.18 2010/06/05 11:13:30 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -80,7 +80,7 @@ int spam(uschar **listptr) {
};
/* make sure the eml mbox file is spooled up */
- mbox_file = spool_mbox(&mbox_size);
+ mbox_file = spool_mbox(&mbox_size, NULL);
if (mbox_file == NULL) {
/* error while spooling */
diff --git a/src/src/spool_mbox.c b/src/src/spool_mbox.c
index 42a2fe171..3364b5751 100644
--- a/src/src/spool_mbox.c
+++ b/src/src/spool_mbox.c
@@ -1,4 +1,4 @@
-/* $Cambridge: exim/src/src/spool_mbox.c,v 1.14 2008/01/16 09:56:55 tom Exp $ */
+/* $Cambridge: exim/src/src/spool_mbox.c,v 1.15 2010/06/05 11:13:30 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
@@ -25,9 +25,10 @@ extern int spam_ok;
int spool_mbox_ok = 0;
uschar spooled_message_id[17];
-/* returns a pointer to the FILE, and puts the size in bytes into mbox_file_size */
+/* returns a pointer to the FILE, and puts the size in bytes into mbox_file_size
+ * normally, source_file_override is NULL */
-FILE *spool_mbox(unsigned long *mbox_file_size) {
+FILE *spool_mbox(unsigned long *mbox_file_size, uschar *source_file_override) {
uschar message_subdir[2];
uschar buffer[16384];
uschar *temp_string;
@@ -100,13 +101,17 @@ FILE *spool_mbox(unsigned long *mbox_file_size) {
(void)fwrite("\n", 1, 1, mbox_file);
/* copy body file */
- message_subdir[1] = '\0';
- for (i = 0; i < 2; i++) {
- message_subdir[0] = (split_spool_directory == (i == 0))? message_id[5] : 0;
- temp_string = string_sprintf("%s/input/%s/%s-D", spool_directory,
- message_subdir, message_id);
- data_file = Ufopen(temp_string, "rb");
- if (data_file != NULL) break;
+ if (source_file_override == NULL) {
+ message_subdir[1] = '\0';
+ for (i = 0; i < 2; i++) {
+ message_subdir[0] = (split_spool_directory == (i == 0))? message_id[5] : 0;
+ temp_string = string_sprintf("%s/input/%s/%s-D", spool_directory,
+ message_subdir, message_id);
+ data_file = Ufopen(temp_string, "rb");
+ if (data_file != NULL) break;
+ };
+ } else {
+ data_file = Ufopen(source_file_override, "rb");
};
if (data_file == NULL) {
@@ -125,7 +130,8 @@ FILE *spool_mbox(unsigned long *mbox_file_size) {
* explicitly, because the one in the file is parted of the locked area.
*/
- (void)fseek(data_file, SPOOL_DATA_START_OFFSET, SEEK_SET);
+ if (!source_file_override)
+ (void)fseek(data_file, SPOOL_DATA_START_OFFSET, SEEK_SET);
do {
j = fread(buffer, 1, sizeof(buffer), data_file);
@@ -188,6 +194,12 @@ void unspool_mbox(void) {
mbox_path = string_sprintf("%s/scan/%s", spool_directory, spooled_message_id);
tempdir = opendir(CS mbox_path);
+ if (!tempdir) {
+ debug_printf("Unable to opendir(%s): %s\n", mbox_path, strerror(errno));
+ /* Just in case we still can: */
+ rmdir(CS mbox_path);
+ return;
+ }
/* loop thru dir & delete entries */
while((entry = readdir(tempdir)) != NULL) {
uschar *name = US entry->d_name;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 20:03:27 +0000